diff options
author | phk <phk@FreeBSD.org> | 1995-09-26 08:57:47 +0000 |
---|---|---|
committer | phk <phk@FreeBSD.org> | 1995-09-26 08:57:47 +0000 |
commit | f37fd45509f6156ea1215495b4cda2d4f71cef44 (patch) | |
tree | 37676b8161c37e5f2e86ecd86a1f0c25f35f4635 /sys | |
parent | 254317c903ff647132edc03a723a344e29a59005 (diff) | |
download | FreeBSD-src-f37fd45509f6156ea1215495b4cda2d4f71cef44.zip FreeBSD-src-f37fd45509f6156ea1215495b4cda2d4f71cef44.tar.gz |
if_ze.c was derived from if_ed.c about 42 (!) versions ago. It is now
scheduled for demolition. This is a first step: get rid of if_zereg.h,
by adding the five extra definitions to if_edreg.h.
Also add some definitions which will become needed when if_ze.c gets
replaced entirely by pccard and if_ed.c. (this is a 2.1.0 candidate)
Diffstat (limited to 'sys')
-rw-r--r-- | sys/dev/ed/if_edreg.h | 22 | ||||
-rw-r--r-- | sys/i386/isa/if_edreg.h | 22 | ||||
-rw-r--r-- | sys/i386/isa/if_ze.c | 151 |
3 files changed, 113 insertions, 82 deletions
diff --git a/sys/dev/ed/if_edreg.h b/sys/dev/ed/if_edreg.h index 430fa93..11a2b61 100644 --- a/sys/dev/ed/if_edreg.h +++ b/sys/dev/ed/if_edreg.h @@ -6,7 +6,7 @@ * of this software, nor does the author assume any responsibility * for damages incurred with its use. * - * $Id: if_edreg.h,v 1.17 1995/01/23 19:06:08 davidg Exp $ + * $Id: if_edreg.h,v 1.18 1995/05/30 08:02:00 rgrimes Exp $ */ /* * National Semiconductor DS8390 NIC register definitions @@ -568,6 +568,7 @@ struct ed_ring { #define ED_VENDOR_WD_SMC 0x00 /* Western Digital/SMC */ #define ED_VENDOR_3COM 0x01 /* 3Com */ #define ED_VENDOR_NOVELL 0x02 /* Novell */ +#define ED_VENDOR_PCCARD 0x03 /* PCMCIA/PCCARD */ /* * Compile-time config flags @@ -981,3 +982,22 @@ struct ed_ring { * Reset register; reading from this register causes a board reset */ #define ED_NOVELL_RESET 0x0f + +/* + * Definitions for PCCARD + */ +#define ED_PC_PAGE_OFFSET 0x40 /* page offset for NIC access to mem */ +#define ED_PC_IO_PORTS 32 +#define ED_PC_RESET 0x1f +#define ED_PC_MISC 0x18 + +/* + * if_ze.h constants + */ + +#define ZE_PAGE_OFFSET 0x40 /* mem buffer starts at 0x4000 */ + +#define ZE_DATA_IO 0x10 +#define ZE_MISC 0x18 +#define ZE_RESET 0x1F + diff --git a/sys/i386/isa/if_edreg.h b/sys/i386/isa/if_edreg.h index 430fa93..11a2b61 100644 --- a/sys/i386/isa/if_edreg.h +++ b/sys/i386/isa/if_edreg.h @@ -6,7 +6,7 @@ * of this software, nor does the author assume any responsibility * for damages incurred with its use. * - * $Id: if_edreg.h,v 1.17 1995/01/23 19:06:08 davidg Exp $ + * $Id: if_edreg.h,v 1.18 1995/05/30 08:02:00 rgrimes Exp $ */ /* * National Semiconductor DS8390 NIC register definitions @@ -568,6 +568,7 @@ struct ed_ring { #define ED_VENDOR_WD_SMC 0x00 /* Western Digital/SMC */ #define ED_VENDOR_3COM 0x01 /* 3Com */ #define ED_VENDOR_NOVELL 0x02 /* Novell */ +#define ED_VENDOR_PCCARD 0x03 /* PCMCIA/PCCARD */ /* * Compile-time config flags @@ -981,3 +982,22 @@ struct ed_ring { * Reset register; reading from this register causes a board reset */ #define ED_NOVELL_RESET 0x0f + +/* + * Definitions for PCCARD + */ +#define ED_PC_PAGE_OFFSET 0x40 /* page offset for NIC access to mem */ +#define ED_PC_IO_PORTS 32 +#define ED_PC_RESET 0x1f +#define ED_PC_MISC 0x18 + +/* + * if_ze.h constants + */ + +#define ZE_PAGE_OFFSET 0x40 /* mem buffer starts at 0x4000 */ + +#define ZE_DATA_IO 0x10 +#define ZE_MISC 0x18 +#define ZE_RESET 0x1F + diff --git a/sys/i386/isa/if_ze.c b/sys/i386/isa/if_ze.c index f6a7e39..4161d5f 100644 --- a/sys/i386/isa/if_ze.c +++ b/sys/i386/isa/if_ze.c @@ -47,7 +47,7 @@ */ /* - * $Id: if_ze.c,v 1.18 1995/07/25 22:18:55 bde Exp $ + * $Id: if_ze.c,v 1.19 1995/08/16 16:12:35 bde Exp $ */ #include "ze.h" @@ -90,7 +90,7 @@ #include <i386/isa/isa.h> #include <i386/isa/isa_device.h> #include <i386/isa/icu.h> -#include <i386/isa/if_zereg.h> +#include <i386/isa/if_edreg.h> #include <i386/isa/pcic.h> #include "apm.h" @@ -398,12 +398,12 @@ ze_probe(isa_dev) sc->memwidth = 16; /* allocate 1 xmit buffer */ - sc->smem_ring = sc->smem_start + (ZE_PAGE_SIZE * ZE_TXBUF_SIZE); + sc->smem_ring = sc->smem_start + (ED_PAGE_SIZE * ED_TXBUF_SIZE); sc->txb_cnt = 1; - sc->rec_page_start = ZE_TXBUF_SIZE + ZE_PAGE_OFFSET; + sc->rec_page_start = ED_TXBUF_SIZE + ZE_PAGE_OFFSET; sc->smem_size = memsize; sc->smem_end = sc->smem_start + memsize; - sc->rec_page_stop = memsize / ZE_PAGE_SIZE + ZE_PAGE_OFFSET; + sc->rec_page_stop = memsize / ED_PAGE_SIZE + ZE_PAGE_OFFSET; sc->tx_page_start = ZE_PAGE_OFFSET; /* get station address */ @@ -612,15 +612,7 @@ ze_attach(isa_dev) ifp->if_reset = ze_reset; ifp->if_watchdog = ze_watchdog; - /* - * Set default state for IIF_LINK0 flag (used to disable the tranceiver - * for AUI operation), based on compile-time config option. - */ - if (isa_dev->id_flags & ZE_FLAGS_DISABLE_TRANCEIVER) - ifp->if_flags = (IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS - | IFF_LINK0); - else - ifp->if_flags = (IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS); + ifp->if_flags = (IFF_BROADCAST | IFF_SIMPLEX | IFF_NOTRAILERS); /* * Attach the interface @@ -653,11 +645,10 @@ ze_attach(isa_dev) /* * Print additional info when attached */ - printf("ze%d: address %s, type %s (%dbit)%s, MAU %s\n", + printf("ze%d: address %s, type %s (%dbit), MAU %s\n", isa_dev->id_unit, ether_sprintf(sc->arpcom.ac_enaddr), sc->type_str, sc->memwidth, - (ifp->if_flags & IFF_LINK0 ? " [tranceiver disabled]" : ""), sc->mau); /* @@ -716,14 +707,14 @@ ze_stop(unit) /* * Stop everything on the interface, and select page 0 registers. */ - outb(sc->nic_addr + ZE_P0_CR, ZE_CR_RD2|ZE_CR_STP); + outb(sc->nic_addr + ED_P0_CR, ED_CR_RD2|ED_CR_STP); /* * Wait for interface to enter stopped state, but limit # of checks * to 'n' (about 5ms). It shouldn't even take 5us on modern * DS8390's, but just in case it's an old one. */ - while (((inb(sc->nic_addr + ZE_P0_ISR) & ZE_ISR_RST) == 0) && --n); + while (((inb(sc->nic_addr + ED_P0_ISR) & ED_ISR_RST) == 0) && --n); pcic_power_off(sc->slot); } @@ -744,18 +735,18 @@ ze_watchdog(unit) if(!(sc->arpcom.ac_if.if_flags & IFF_UP)) return; /* select page zero */ - outb (sc->nic_addr + ZE_P0_CR, - (inb (sc->nic_addr + ZE_P0_CR) & 0x3f) | ZE_CR_PAGE_0); + outb (sc->nic_addr + ED_P0_CR, + (inb (sc->nic_addr + ED_P0_CR) & 0x3f) | ED_CR_PAGE_0); /* read interrupt status register */ - isr = inb (sc->nic_addr + ZE_P0_ISR) & 0xff; + isr = inb (sc->nic_addr + ED_P0_ISR) & 0xff; /* select page two */ - outb (sc->nic_addr + ZE_P0_CR, - (inb (sc->nic_addr + ZE_P0_CR) & 0x3f) | ZE_CR_PAGE_2); + outb (sc->nic_addr + ED_P0_CR, + (inb (sc->nic_addr + ED_P0_CR) & 0x3f) | ED_CR_PAGE_2); /* read interrupt mask register */ - imr = inb (sc->nic_addr + ZE_P2_IMR) & 0xff; + imr = inb (sc->nic_addr + ED_P2_IMR) & 0xff; imask = inb(IO_ICU2) << 8 | inb(IO_ICU1); @@ -809,54 +800,54 @@ ze_init(unit) /* * Set interface for page 0, Remote DMA complete, Stopped */ - outb(sc->nic_addr + ZE_P0_CR, ZE_CR_RD2|ZE_CR_STP); + outb(sc->nic_addr + ED_P0_CR, ED_CR_RD2|ED_CR_STP); if (sc->memwidth == 16) { /* * Set FIFO threshold to 8, No auto-init Remote DMA, * byte order=80x86, word-wide DMA xfers */ - outb(sc->nic_addr + ZE_P0_DCR, ZE_DCR_FT1|ZE_DCR_WTS); + outb(sc->nic_addr + ED_P0_DCR, ED_DCR_FT1|ED_DCR_WTS); } else { /* * Same as above, but byte-wide DMA xfers */ - outb(sc->nic_addr + ZE_P0_DCR, ZE_DCR_FT1); + outb(sc->nic_addr + ED_P0_DCR, ED_DCR_FT1); } /* * Clear Remote Byte Count Registers */ - outb(sc->nic_addr + ZE_P0_RBCR0, 0); - outb(sc->nic_addr + ZE_P0_RBCR1, 0); + outb(sc->nic_addr + ED_P0_RBCR0, 0); + outb(sc->nic_addr + ED_P0_RBCR1, 0); /* * Enable reception of broadcast packets */ - outb(sc->nic_addr + ZE_P0_RCR, ZE_RCR_AB); + outb(sc->nic_addr + ED_P0_RCR, ED_RCR_AB); /* * Place NIC in internal loopback mode */ - outb(sc->nic_addr + ZE_P0_TCR, ZE_TCR_LB0); + outb(sc->nic_addr + ED_P0_TCR, ED_TCR_LB0); /* * Initialize transmit/receive (ring-buffer) Page Start */ - outb(sc->nic_addr + ZE_P0_TPSR, sc->tx_page_start); - outb(sc->nic_addr + ZE_P0_PSTART, sc->rec_page_start); + outb(sc->nic_addr + ED_P0_TPSR, sc->tx_page_start); + outb(sc->nic_addr + ED_P0_PSTART, sc->rec_page_start); /* * Initialize Receiver (ring-buffer) Page Stop and Boundry */ - outb(sc->nic_addr + ZE_P0_PSTOP, sc->rec_page_stop); - outb(sc->nic_addr + ZE_P0_BNRY, sc->rec_page_start); + outb(sc->nic_addr + ED_P0_PSTOP, sc->rec_page_stop); + outb(sc->nic_addr + ED_P0_BNRY, sc->rec_page_start); /* * Clear all interrupts. A '1' in each bit position clears the * corresponding flag. */ - outb(sc->nic_addr + ZE_P0_ISR, 0xff); + outb(sc->nic_addr + ED_P0_ISR, 0xff); /* * Enable the following interrupts: receive/transmit complete, @@ -864,19 +855,19 @@ ze_init(unit) * * Counter overflow and Remote DMA complete are *not* enabled. */ - outb(sc->nic_addr + ZE_P0_IMR, - ZE_IMR_PRXE|ZE_IMR_PTXE|ZE_IMR_RXEE|ZE_IMR_TXEE|ZE_IMR_OVWE); + outb(sc->nic_addr + ED_P0_IMR, + ED_IMR_PRXE|ED_IMR_PTXE|ED_IMR_RXEE|ED_IMR_TXEE|ED_IMR_OVWE); /* * Program Command Register for page 1 */ - outb(sc->nic_addr + ZE_P0_CR, ZE_CR_PAGE_1|ZE_CR_RD2|ZE_CR_STP); + outb(sc->nic_addr + ED_P0_CR, ED_CR_PAGE_1|ED_CR_RD2|ED_CR_STP); /* * Copy out our station address */ for (i = 0; i < ETHER_ADDR_LEN; ++i) - outb(sc->nic_addr + ZE_P1_PAR0 + i, sc->arpcom.ac_enaddr[i]); + outb(sc->nic_addr + ED_P1_PAR0 + i, sc->arpcom.ac_enaddr[i]); #if NBPFILTER > 0 /* @@ -884,24 +875,24 @@ ze_init(unit) * all multicasts (only used when in promiscuous mode) */ for (i = 0; i < 8; ++i) - outb(sc->nic_addr + ZE_P1_MAR0 + i, 0xff); + outb(sc->nic_addr + ED_P1_MAR0 + i, 0xff); #endif /* * Set Current Page pointer to next_packet (initialized above) */ - outb(sc->nic_addr + ZE_P1_CURR, sc->next_packet); + outb(sc->nic_addr + ED_P1_CURR, sc->next_packet); /* * Set Command Register for page 0, Remote DMA complete, * and interface Start. */ - outb(sc->nic_addr + ZE_P1_CR, ZE_CR_RD2|ZE_CR_STA); + outb(sc->nic_addr + ED_P1_CR, ED_CR_RD2|ED_CR_STA); /* * Take interface out of loopback */ - outb(sc->nic_addr + ZE_P0_TCR, 0); + outb(sc->nic_addr + ED_P0_TCR, 0); /* * Set 'running' flag, and clear output active flag. @@ -930,24 +921,24 @@ ze_xmit(ifp) /* * Set NIC for page 0 register access */ - outb(sc->nic_addr + ZE_P0_CR, ZE_CR_RD2|ZE_CR_STA); + outb(sc->nic_addr + ED_P0_CR, ED_CR_RD2|ED_CR_STA); /* * Set TX buffer start page */ - outb(sc->nic_addr + ZE_P0_TPSR, sc->tx_page_start + - sc->txb_next * ZE_TXBUF_SIZE); + outb(sc->nic_addr + ED_P0_TPSR, sc->tx_page_start + + sc->txb_next * ED_TXBUF_SIZE); /* * Set TX length */ - outb(sc->nic_addr + ZE_P0_TBCR0, len & 0xff); - outb(sc->nic_addr + ZE_P0_TBCR1, len >> 8); + outb(sc->nic_addr + ED_P0_TBCR0, len & 0xff); + outb(sc->nic_addr + ED_P0_TBCR1, len >> 8); /* * Set page 0, Remote DMA complete, Transmit Packet, and *Start* */ - outb(sc->nic_addr + ZE_P0_CR, ZE_CR_RD2|ZE_CR_TXP|ZE_CR_STA); + outb(sc->nic_addr + ED_P0_CR, ED_CR_RD2|ED_CR_TXP|ED_CR_STA); sc->xmit_busy = 1; sc->data_buffered = 0; @@ -1029,7 +1020,7 @@ outloop: * Copy the mbuf chain into the transmit buffer */ - buffer = sc->smem_start + (sc->txb_next * ZE_TXBUF_SIZE * ZE_PAGE_SIZE); + buffer = sc->smem_start + (sc->txb_next * ED_TXBUF_SIZE * ED_PAGE_SIZE); len = 0; for (m0 = m; m != 0; m = m->m_next) { bcopy(mtod(m, caddr_t), buffer, m->m_len); @@ -1080,12 +1071,12 @@ ze_rint(unit) register struct ze_softc *sc = &ze_softc[unit]; u_char boundry, current; u_short len; - struct ze_ring *packet_ptr; + struct ed_ring *packet_ptr; /* * Set NIC to page 1 registers to get 'current' pointer */ - outb(sc->nic_addr + ZE_P0_CR, ZE_CR_PAGE_1|ZE_CR_RD2|ZE_CR_STA); + outb(sc->nic_addr + ED_P0_CR, ED_CR_PAGE_1|ED_CR_RD2|ED_CR_STA); /* * 'sc->next_packet' is the logical beginning of the ring-buffer - i.e. @@ -1095,11 +1086,11 @@ ze_rint(unit) * We loop here until the logical beginning equals the logical * end (or in other words, until the ring-buffer is empty). */ - while (sc->next_packet != inb(sc->nic_addr + ZE_P1_CURR)) { + while (sc->next_packet != inb(sc->nic_addr + ED_P1_CURR)) { /* get pointer to this buffer header structure */ - packet_ptr = (struct ze_ring *)(sc->smem_ring + - (sc->next_packet - sc->rec_page_start) * ZE_PAGE_SIZE); + packet_ptr = (struct ed_ring *)(sc->smem_ring + + (sc->next_packet - sc->rec_page_start) * ED_PAGE_SIZE); /* * The byte count includes the FCS - Frame Check Sequence (a @@ -1143,15 +1134,15 @@ ze_rint(unit) /* * Set NIC to page 0 registers to update boundry register */ - outb(sc->nic_addr + ZE_P0_CR, ZE_CR_RD2|ZE_CR_STA); + outb(sc->nic_addr + ED_P0_CR, ED_CR_RD2|ED_CR_STA); - outb(sc->nic_addr + ZE_P0_BNRY, boundry); + outb(sc->nic_addr + ED_P0_BNRY, boundry); /* * Set NIC to page 1 registers before looping to top (prepare to * get 'CURR' current pointer) */ - outb(sc->nic_addr + ZE_P0_CR, ZE_CR_PAGE_1|ZE_CR_RD2|ZE_CR_STA); + outb(sc->nic_addr + ED_P0_CR, ED_CR_PAGE_1|ED_CR_RD2|ED_CR_STA); } } @@ -1170,19 +1161,19 @@ zeintr(unit) /* * Set NIC to page 0 registers */ - outb(sc->nic_addr + ZE_P0_CR, ZE_CR_RD2|ZE_CR_STA); + outb(sc->nic_addr + ED_P0_CR, ED_CR_RD2|ED_CR_STA); /* * loop until there are no more new interrupts */ - while (isr = inb(sc->nic_addr + ZE_P0_ISR)) { + while (isr = inb(sc->nic_addr + ED_P0_ISR)) { /* * reset all the bits that we are 'acknowleging' * by writing a '1' to each bit position that was set * (writing a '1' *clears* the bit) */ - outb(sc->nic_addr + ZE_P0_ISR, isr); + outb(sc->nic_addr + ED_P0_ISR, isr); /* * Transmit error. If a TX completed with an error, we end up @@ -1192,14 +1183,14 @@ zeintr(unit) * the flow. Of course, with UDP we're screwed, but this is * expected when a network is heavily loaded. */ - if (isr & ZE_ISR_TXE) { - u_char tsr = inb(sc->nic_addr + ZE_P0_TSR); - u_char ncr = inb(sc->nic_addr + ZE_P0_NCR); + if (isr & ED_ISR_TXE) { + u_char tsr = inb(sc->nic_addr + ED_P0_TSR); + u_char ncr = inb(sc->nic_addr + ED_P0_NCR); /* * Excessive collisions (16) */ - if ((tsr & ZE_TSR_ABT) && (ncr == 0)) { + if ((tsr & ED_TSR_ABT) && (ncr == 0)) { /* * When collisions total 16, the P0_NCR will * indicate 0, and the TSR_ABT is set. @@ -1230,11 +1221,11 @@ zeintr(unit) * Receiver Error. One or more of: CRC error, frame alignment error * FIFO overrun, or missed packet. */ - if (isr & ZE_ISR_RXE) { + if (isr & ED_ISR_RXE) { ++sc->arpcom.ac_if.if_ierrors; #ifdef ZE_DEBUG printf("ze%d: receive error %b\n", unit, - inb(sc->nic_addr + ZE_P0_RSR), + inb(sc->nic_addr + ED_P0_RSR), "\20\8DEF\7REC DISAB\6PHY/MC\5MISSED\4OVR\3ALIGN\2FCS\1RCVD"); #endif } @@ -1248,7 +1239,7 @@ zeintr(unit) * seen only with early rev chips - Methinks this * bug was fixed in later revs. -DG */ - if (isr & ZE_ISR_OVW) { + if (isr & ED_ISR_OVW) { ++sc->arpcom.ac_if.if_ierrors; /* * Stop/reset/re-init NIC @@ -1259,7 +1250,7 @@ zeintr(unit) /* * Transmission completed normally. */ - if (isr & ZE_ISR_PTX) { + if (isr & ED_ISR_PTX) { /* * reset tx busy and output active flags @@ -1283,7 +1274,7 @@ zeintr(unit) * transmission. */ sc->arpcom.ac_if.if_collisions += inb(sc->nic_addr + - ZE_P0_TBCR0); + ED_P0_TBCR0); } /* @@ -1292,7 +1283,7 @@ zeintr(unit) * shouldn't be any data to get (we've configured the * interface to not accept packets with errors). */ - if (isr & (ZE_ISR_PRX|ZE_ISR_RXE)) { + if (isr & (ED_ISR_PRX|ED_ISR_RXE)) { ze_rint (unit); } @@ -1313,7 +1304,7 @@ zeintr(unit) * in the transmit routine, is *okay* - it is 'edge' * triggered from low to high) */ - outb(sc->nic_addr + ZE_P0_CR, ZE_CR_RD2|ZE_CR_STA); + outb(sc->nic_addr + ED_P0_CR, ED_CR_RD2|ED_CR_STA); /* * If the Network Talley Counters overflow, read them to @@ -1321,10 +1312,10 @@ zeintr(unit) * clear the ISR flag otherwise - resulting in an * infinite loop. */ - if (isr & ZE_ISR_CNT) { - (void) inb(sc->nic_addr + ZE_P0_CNTR0); - (void) inb(sc->nic_addr + ZE_P0_CNTR1); - (void) inb(sc->nic_addr + ZE_P0_CNTR2); + if (isr & ED_ISR_CNT) { + (void) inb(sc->nic_addr + ED_P0_CNTR0); + (void) inb(sc->nic_addr + ED_P0_CNTR1); + (void) inb(sc->nic_addr + ED_P0_CNTR2); } } } @@ -1426,15 +1417,15 @@ ze_ioctl(ifp, command, data) * hashing array. For now we assume that * this was done in ze_init(). */ - outb(sc->nic_addr + ZE_P0_RCR, - ZE_RCR_PRO|ZE_RCR_AM|ZE_RCR_AB); + outb(sc->nic_addr + ED_P0_RCR, + ED_RCR_PRO|ED_RCR_AM|ED_RCR_AB); } else { /* * XXX - for multicasts to work, we would need to * rewrite the multicast hashing array with the * proper hash (would have been destroyed above). */ - outb(sc->nic_addr + ZE_P0_RCR, ZE_RCR_AB); + outb(sc->nic_addr + ED_P0_RCR, ED_RCR_AB); } #endif break; |