Add custom kernel configuration and device tree source files for

Seagate FreeAgent DockStar(tm) device. It seems to be a dumb down
version of Marvell SheevaPlug. Device tree source file could use
more tweaking, but at least it wll network boot and run FreeBSD/arm.

2 files changed, 341 insertions, 0 deletions

diff --git a/sys/arm/conf/DOCKSTAR b/sys/arm/conf/DOCKSTAR
new file mode 100644
index 0000000..780cb78
--- /dev/null
+++ b/sys/arm/conf/DOCKSTAR
@@ -0,0 +1,76 @@
+#
+# Custom kernel for Seagate DockStar (Marvell SheevaPlug based) devices.
+#
+# $FreeBSD$
+#
+
+ident		DOCKSTAR
+include		"../mv/kirkwood/std.sheevaplug"
+
+options 	SOC_MV_KIRKWOOD
+makeoptions	MODULES_OVERRIDE=""
+
+#makeoptions	DEBUG=-g		#Build kernel with gdb(1) debug symbols
+makeoptions	WERROR="-Werror"
+
+options 	SCHED_4BSD		#4BSD scheduler
+options 	INET			#InterNETworking
+options 	INET6			#IPv6 communications protocols
+options 	FFS			#Berkeley Fast Filesystem
+options 	NFSCLIENT		#Network Filesystem Client
+options 	NFSLOCKD		#Network Lock Manager
+options 	NFS_ROOT		#NFS usable as /, requires NFSCLIENT
+options 	BOOTP
+options 	BOOTP_NFSROOT
+options 	BOOTP_NFSV3
+options 	BOOTP_COMPAT
+options 	BOOTP_WIRED_TO=mge0
+
+# Root fs on USB device
+#options        ROOTDEVNAME=\"ufs:/dev/da0a\"
+
+options 	SYSVSHM			#SYSV-style shared memory
+options 	SYSVMSG			#SYSV-style message queues
+options 	SYSVSEM			#SYSV-style semaphores
+options 	_KPOSIX_PRIORITY_SCHEDULING #Posix P1003_1B real-time extensions
+options 	MUTEX_NOINLINE
+options 	RWLOCK_NOINLINE
+options 	NO_FFS_SNAPSHOT
+options 	NO_SWAPPING
+
+# Debugging
+options 	ALT_BREAK_TO_DEBUGGER
+options 	DDB
+options 	KDB
+
+# Pseudo devices
+device		md
+device		random
+device		pty
+device		loop
+
+# Serial ports
+device		uart
+
+# Networking
+device		ether
+device		mge			# Marvell Gigabit Ethernet controller
+device		mii
+device		bpf
+options		HZ=1000
+options		DEVICE_POLLING
+device		vlan
+
+# USB
+options 	USB_DEBUG	# enable debug msgs
+device		usb
+device		ehci
+device		umass
+device		scbus
+device		pass
+device		da
+
+# Flattened Device Tree
+options 	FDT
+options		FDT_DTB_STATIC
+makeoptions	FDT_DTS_FILE=dockstar.dts
diff --git a/sys/boot/fdt/dts/dockstar.dts b/sys/boot/fdt/dts/dockstar.dts
new file mode 100644
index 0000000..4698109
--- /dev/null
+++ b/sys/boot/fdt/dts/dockstar.dts
@@ -0,0 +1,265 @@
+/*
+ * Copyright (c) 2010 The FreeBSD Foundation
+ * All rights reserved.
+ *
+ * This software was developed by Semihalf under sponsorship from
+ * the FreeBSD Foundation.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * Seagate DockStar (Marvell SheevaPlug based) Device Tree Source.
+ *
+ * $FreeBSD$
+ */
+
+/dts-v1/;
+
+/ {
+	model = "seagate,DockStar";
+	compatible = "DockStar";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		mpp = &MPP;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		soc = &SOC;
+		sram = &SRAM;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@0 {
+			device_type = "cpu";
+			compatible = "ARM,88FR131";
+			reg = <0x0>;
+			d-cache-line-size = <32>;	// 32 bytes
+			i-cache-line-size = <32>;	// 32 bytes
+			d-cache-size = <0x4000>;	// L1, 16K
+			i-cache-size = <0x4000>;	// L1, 16K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x0 0x8000000>;		// 128M at 0x0
+	};
+
+	localbus@f1000000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "mrvl,lbc";
+
+		/* This reflects CPU decode windows setup. */
+		ranges = <0x0 0x0f 0xf9300000 0x00100000
+			  0x1 0x1e 0xfa000000 0x00100000
+			  0x2 0x1d 0xfa100000 0x02000000
+			  0x3 0x1b 0xfc100000 0x00000400>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x00100000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		led@1,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "led";
+			reg = <0x1 0x0 0x00100000>;
+		};
+
+		nor@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x2 0x0 0x02000000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+
+		nand@3,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			reg = <0x3 0x0 0x00100000>;
+			bank-width = <2>;
+			device-width = <1>;
+		};
+	};
+
+	SOC: soc88f6281@f1000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		ranges = <0x0 0xf1000000 0x00100000>;
+		bus-frequency = <0>;
+
+		PIC: pic@20200 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			reg = <0x20200 0x3c>;
+			compatible = "mrvl,pic";
+		};
+
+		timer@20300 {
+			compatible = "mrvl,timer";
+			reg = <0x20300 0x30>;
+			interrupts = <1>;
+			interrupt-parent = <&PIC>;
+			mrvl,has-wdt;
+		};
+
+		MPP: mpp@10000 {
+			#pin-cells = <2>;
+			compatible = "mrvl,mpp";
+			reg = <0x10000 0x34>;
+			pin-count = <50>;
+			pin-map = <
+				0  1		/* MPP[0]:  NF_IO[2] */
+				1  1		/* MPP[1]:  NF_IO[3] */
+				2  1		/* MPP[2]:  NF_IO[4] */
+				3  1		/* MPP[3]:  NF_IO[5] */
+				4  1		/* MPP[4]:  NF_IO[6] */
+				5  1		/* MPP[5]:  NF_IO[7] */
+				6  1		/* MPP[6]:  SYSRST_OUTn */
+				8  2		/* MPP[8]:  UA0_RTS */
+				9  2		/* MPP[9]:  UA0_CTS */
+				10 3		/* MPP[10]: UA0_TXD */
+				11 3		/* MPP[11]: UA0_RXD */
+				12 1		/* MPP[12]: SD_CLK */
+				13 1		/* MPP[13]: SD_CMD */
+				14 1		/* MPP[14]: SD_D[0] */
+				15 1		/* MPP[15]: SD_D[1] */
+				16 1		/* MPP[16]: SD_D[2] */
+				17 1		/* MPP[17]: SD_D[3] */
+				18 1		/* MPP[18]: NF_IO[0] */
+				19 1		/* MPP[19]: NF_IO[1] */
+				29 1 >;		/* MPP[29]: TSMP[9] */
+		};
+
+		GPIO: gpio@10100 {
+			#gpio-cells = <3>;
+			compatible = "mrvl,gpio";
+			reg = <0x10100 0x20>;
+			gpio-controller;
+			interrupts = <35 36 37 38 39 40 41>;
+			interrupt-parent = <&PIC>;
+		};
+
+		rtc@10300 {
+			compatible = "mrvl,rtc";
+			reg = <0x10300 0x08>;
+		};
+
+		twsi@11000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "mrvl,twsi";
+			reg = <0x11000 0x20>;
+			interrupts = <43>;
+			interrupt-parent = <&PIC>;
+		};
+
+		enet0: ethernet@72000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			model = "V2";
+			compatible = "mrvl,ge";
+			reg = <0x72000 0x2000>;
+			ranges = <0x0 0x72000 0x2000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <12 13 14 11 46>;
+			interrupt-parent = <&PIC>;
+			phy-handle = <&phy0>;
+
+			mdio@0 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "mrvl,mdio";
+
+				phy0: ethernet-phy@0 {
+					reg = <0x0>;
+				};
+			};
+		};
+
+		serial0: serial@12000 {
+			compatible = "ns16550";
+			reg = <0x12000 0x20>;
+			reg-shift = <2>;
+			clock-frequency = <0>;
+			interrupts = <33>;
+			interrupt-parent = <&PIC>;
+		};
+
+		serial1: serial@12100 {
+			compatible = "ns16550";
+			reg = <0x12100 0x20>;
+			reg-shift = <2>;
+			clock-frequency = <0>;
+			interrupts = <34>;
+			interrupt-parent = <&PIC>;
+		};
+
+		crypto@30000 {
+			compatible = "mrvl,cesa";
+			reg = <0x30000 0x10000>;
+			interrupts = <22>;
+			interrupt-parent = <&PIC>;
+		};
+
+		usb@50000 {
+			compatible = "mrvl,usb-ehci", "usb-ehci";
+			reg = <0x50000 0x1000>;
+			interrupts = <48 19>;
+			interrupt-parent = <&PIC>;
+		};
+
+		xor@60000 {
+			compatible = "mrvl,xor";
+			reg = <0x60000 0x1000>;
+			interrupts = <5 6 7 8>;
+			interrupt-parent = <&PIC>;
+		};
+	};
+
+	SRAM: sram@fd000000 {
+		compatible = "mrvl,cesa-sram";
+		reg = <0xfd000000 0x00100000>;
+	};
+
+	chosen {
+		stdin = "serial0";
+		stdout = "serial0";
+	};
+};