Remove a vestige of the amd driver.

Forgotten by:	msmith

1 files changed, 0 insertions, 667 deletions

diff --git a/sys/pci/tek390.h b/sys/pci/tek390.h
deleted file mode 100644
index c8de8ce..0000000
--- a/sys/pci/tek390.h
+++ /dev/null
@@ -1,667 +0,0 @@
-/***********************************************************************
-;*	File Name : TEK390.H					       *
-;*		    TEKRAM DC-390 PCI SCSI Bus Master Host Adapter     *
-;*		    Device Driver				       *
-;***********************************************************************/
-
-#ifndef TEK390_H
-#define TEK390_H
-
-typedef unsigned char	UCHAR;
-typedef unsigned short	USHORT;
-typedef unsigned long	ULONG;
-typedef unsigned int	UINT;
-
-typedef UCHAR		*PUCHAR;
-typedef USHORT		*PUSHORT;
-typedef ULONG		*PULONG;
-typedef struct scsi_link    *PSCLINK, SCSILINK;
-typedef struct scsi_xfer    *PSCSICMD, SCSICMD;
-typedef void		*PVOID;
-
-
-/*;-----------------------------------------------------------------------*/
-typedef  struct  _SyncMsg
-{
-UCHAR		ExtendMsg;
-UCHAR		ExtMsgLen;
-UCHAR		SyncXferReq;
-UCHAR		Period;
-UCHAR		ReqOffset;
-} SyncMsg;
-/*;-----------------------------------------------------------------------*/
-typedef  struct  _Capacity
-{
-ULONG		BlockCount;
-ULONG		BlockLength;
-} Capacity;
-/*;-----------------------------------------------------------------------*/
-typedef  struct  _SGentry
-{
-ULONG		SGXLen;
-ULONG		SGXPtr;
-} SGentry, *PSEG;
-
-typedef  struct  _SGentry1
-{
-ULONG		SGXPtr1;
-ULONG		SGXLen1;
-} SGentry1, *PSEG1;
-
-
-#define MAX_ADAPTER_NUM 	4
-#define MAX_SCSI_ID		8
-#define MAX_SG_ENTRY		33
-#define MAX_DEVICES		10
-#define MAX_CMD_QUEUE		20
-#define MAX_CMD_PER_LUN 	6
-#define MAX_SRB_CNT		MAX_CMD_PER_LUN*4
-#define PAGELEN 		4096
-
-/*
-;-----------------------------------------------------------------------
-; SCSI Request Block
-;-----------------------------------------------------------------------
-*/
-struct	_SRB
-{
-UCHAR		CmdBlock[12];
-
-struct _SRB	*pNextSRB;
-struct _DCB	*pSRBDCB;
-PSCSICMD	pcmd;
-PSEG		pSegmentList;
-
-ULONG		PhysSRB;
-ULONG		TotalXferredLen;
-ULONG		SGPhysAddr;	/*;a segment starting address */
-ULONG		SGToBeXferLen;	/*; to be xfer length */
-ULONG		Segment0[2];
-ULONG		Segment1[2];
-
-SGentry 	SGsegment[MAX_SG_ENTRY];
-SGentry 	Segmentx;	/* make a one entry of S/G list table */
-
-PUCHAR		pMsgPtr;
-USHORT		SRBState;
-USHORT		Revxx2; 	/* ??? */
-
-UCHAR		MsgInBuf[6];
-UCHAR		MsgOutBuf[6];
-
-UCHAR		AdaptStatus;
-UCHAR		TargetStatus;
-UCHAR		MsgCnt;
-UCHAR		EndMessage;
-UCHAR		TagNumber;
-UCHAR		SGcount;
-UCHAR		SGIndex;
-UCHAR		IORBFlag;	/*;81h-Reset, 2-retry */
-
-UCHAR		SRBStatus;
-UCHAR		RetryCnt;
-UCHAR		SRBFlag;	/*; b0-AutoReqSense,b6-Read,b7-write */
-				/*; b4-settimeout,b5-Residual valid */
-UCHAR		ScsiCmdLen;
-UCHAR		ScsiPhase;
-UCHAR		Reserved3[3];	/*;for dword alignment */
-};
-
-typedef  struct  _SRB	 DC390_SRB, *PSRB;
-
-/*
-;-----------------------------------------------------------------------
-; Device Control Block
-;-----------------------------------------------------------------------
-*/
-struct	_DCB
-{
-struct _DCB	*pNextDCB;
-struct _ACB	*pDCBACB;
-
-PSRB		pWaitingSRB;
-PSRB		pWaitLast;
-PSRB		pGoingSRB;
-PSRB		pGoingLast;
-PSRB		pActiveSRB;
-USHORT		GoingSRBCnt;
-USHORT		WaitSRBCnt;	/* ??? */
-
-ULONG		TagMask;
-
-USHORT		MaxCommand;
-USHORT		AdaptIndex;	/*; UnitInfo struc start */
-USHORT		UnitIndex;	/*; nth Unit on this card */
-UCHAR		UnitSCSIID;	/*; SCSI Target ID  (SCSI Only) */
-UCHAR		UnitSCSILUN;	/*; SCSI Log.  Unit (SCSI Only) */
-
-UCHAR		IdentifyMsg;
-UCHAR		CtrlR1;
-UCHAR		CtrlR3;
-UCHAR		CtrlR4;
-
-UCHAR		InqDataBuf[8];
-UCHAR		CapacityBuf[8];
-UCHAR		DevMode;
-UCHAR		AdpMode;
-UCHAR		SyncMode;	/*; 0:async mode */
-UCHAR		NegoPeriod;	/*;for nego. */
-UCHAR		SyncPeriod;	/*;for reg. */
-UCHAR		SyncOffset;	/*;for reg. and nego.(low nibble) */
-UCHAR		UnitCtrlFlag;
-UCHAR		DCBFlag;
-UCHAR		DevType;
-UCHAR		Reserved2[3];	/*;for dword alignment */
-};
-
-typedef  struct  _DCB	 DC390_DCB, *PDCB;
-/*
-;-----------------------------------------------------------------------
-; Adapter Control Block
-;-----------------------------------------------------------------------
-*/
-struct	_ACB
-{
-ULONG		PhysACB;
-struct _ACB	*pNextACB;
-USHORT		IOPortBase;
-USHORT		Revxx1; 	/* ??? */
-
-PDCB		pLinkDCB;
-PDCB		pDCBRunRobin;
-PDCB		pActiveDCB;
-PDCB		pDCB_free;
-PSRB		pFreeSRB;
-PSRB		pTmpSRB;
-USHORT		SRBCount;
-USHORT		AdapterIndex;	/*; nth Adapter this driver */
-USHORT		max_id;
-USHORT		max_lun;
-SCSILINK	ScsiLink;
-
-UCHAR		msgin123[4];
-UCHAR		status;
-UCHAR		AdaptSCSIID;	/*; Adapter SCSI Target ID */
-UCHAR		AdaptSCSILUN;	/*; Adapter SCSI LUN */
-UCHAR		DeviceCnt;
-UCHAR		IRQLevel;
-UCHAR		TagMaxNum;
-UCHAR		ACBFlag;
-UCHAR		Gmode2;
-UCHAR		LUNchk;
-UCHAR		scan_devices;
-UCHAR		HostID_Bit;
-UCHAR		Reserved1[1];	/*;for dword alignment */
-UCHAR		DCBmap[MAX_SCSI_ID];
-DC390_DCB	DCB_array[MAX_DEVICES]; 	/* +74h,  Len=3E8 */
-DC390_SRB	SRB_array[MAX_SRB_CNT]; 	/* +45Ch, Len=	*/
-DC390_SRB	TmpSRB;
-};
-
-typedef  struct  _ACB	 DC390_ACB, *PACB;
-
-/*;-----------------------------------------------------------------------*/
-
-
-#define BIT31	0x80000000
-#define BIT30	0x40000000
-#define BIT29	0x20000000
-#define BIT28	0x10000000
-#define BIT27	0x08000000
-#define BIT26	0x04000000
-#define BIT25	0x02000000
-#define BIT24	0x01000000
-#define BIT23	0x00800000
-#define BIT22	0x00400000
-#define BIT21	0x00200000
-#define BIT20	0x00100000
-#define BIT19	0x00080000
-#define BIT18	0x00040000
-#define BIT17	0x00020000
-#define BIT16	0x00010000
-#define BIT15	0x00008000
-#define BIT14	0x00004000
-#define BIT13	0x00002000
-#define BIT12	0x00001000
-#define BIT11	0x00000800
-#define BIT10	0x00000400
-#define BIT9	0x00000200
-#define BIT8	0x00000100
-#define BIT7	0x00000080
-#define BIT6	0x00000040
-#define BIT5	0x00000020
-#define BIT4	0x00000010
-#define BIT3	0x00000008
-#define BIT2	0x00000004
-#define BIT1	0x00000002
-#define BIT0	0x00000001
-
-/*;---UnitCtrlFlag */
-#define UNIT_ALLOCATED	BIT0
-#define UNIT_INFO_CHANGED BIT1
-#define FORMATING_MEDIA BIT2
-#define UNIT_RETRY	BIT3
-
-/*;---UnitFlags */
-#define DASD_SUPPORT	BIT0
-#define SCSI_SUPPORT	BIT1
-#define ASPI_SUPPORT	BIT2
-
-/*;----SRBState machine definition */
-#define SRB_FREE	0
-#define SRB_WAIT	BIT0
-#define SRB_READY	BIT1
-#define SRB_MSGOUT	BIT2	/*;arbitration+msg_out 1st byte*/
-#define SRB_MSGIN	BIT3
-#define SRB_MSGIN_MULTI BIT4
-#define SRB_COMMAND	BIT5
-#define SRB_START_	BIT6	/*;arbitration+msg_out+command_out*/
-#define SRB_DISCONNECT	BIT7
-#define SRB_DATA_XFER	BIT8
-#define SRB_XFERPAD	BIT9
-#define SRB_STATUS	BIT10
-#define SRB_COMPLETED	BIT11
-#define SRB_ABORT_SENT	BIT12
-#define DO_SYNC_NEGO	BIT13
-#define SRB_UNEXPECT_RESEL BIT14
-
-/*;---ACBFlag */
-#define RESET_DEV	BIT0
-#define RESET_DETECT	BIT1
-#define RESET_DONE	BIT2
-
-/*;---DCBFlag */
-#define ABORT_DEV_	BIT0
-
-/*;---SRBstatus */
-#define SRB_OK		BIT0
-#define ABORTION	BIT1
-#define OVER_RUN	BIT2
-#define UNDER_RUN	BIT3
-#define PARITY_ERROR	BIT4
-#define SRB_ERROR	BIT5
-
-/*;---SRBFlag */
-#define DATAOUT 	BIT7
-#define DATAIN		BIT6
-#define RESIDUAL_VALID	BIT5
-#define ENABLE_TIMER	BIT4
-#define RESET_DEV0	BIT2
-#define ABORT_DEV	BIT1
-#define AUTO_REQSENSE	BIT0
-
-/*;---Adapter status */
-#define H_STATUS_GOOD	 0
-#define H_SEL_TIMEOUT	 0x11
-#define H_OVER_UNDER_RUN 0x12
-#define H_UNEXP_BUS_FREE 0x13
-#define H_TARGET_PHASE_F 0x14
-#define H_INVALID_CCB_OP 0x16
-#define H_LINK_CCB_BAD	 0x17
-#define H_BAD_TARGET_DIR 0x18
-#define H_DUPLICATE_CCB  0x19
-#define H_BAD_CCB_OR_SG  0x1A
-#define H_ABORT 	 0x0FF
-
-/*; SCSI Status byte codes*/
-#define SCSI_STAT_GOOD		0x0	/*;  Good status */
-#define SCSI_STAT_CHECKCOND	0x02	/*;  SCSI Check Condition */
-#define SCSI_STAT_CONDMET	0x04	/*;  Condition Met */
-#define SCSI_STAT_BUSY		0x08	/*;  Target busy status */
-#define SCSI_STAT_INTER 	0x10	/*;  Intermediate status */
-#define SCSI_STAT_INTERCONDMET	0x14	/*;  Intermediate condition met */
-#define SCSI_STAT_RESCONFLICT	0x18	/*;  Reservation conflict */
-#define SCSI_STAT_CMDTERM	0x22	/*;  Command Terminated */
-#define SCSI_STAT_QUEUEFULL	0x28	/*;  Queue Full */
-
-#define SCSI_STAT_UNEXP_BUS_F	0xFD	/*;  Unexpect Bus Free */
-#define SCSI_STAT_BUS_RST_DETECT 0xFE	/*;  Scsi Bus Reset detected */
-#define SCSI_STAT_SEL_TIMEOUT	0xFF	/*;  Selection Time out */
-
-/*;---Sync_Mode */
-#define SYNC_DISABLE	0
-#define SYNC_ENABLE	BIT0
-#define SYNC_NEGO_DONE	BIT1
-#define WIDE_ENABLE	BIT2
-#define WIDE_NEGO_DONE	BIT3
-#define EN_TAG_QUEUING	BIT4
-#define EN_ATN_STOP	BIT5
-
-#define SYNC_NEGO_OFFSET 15
-
-/*;---SCSI bus phase*/
-#define SCSI_DATA_OUT_	0
-#define SCSI_DATA_IN_	1
-#define SCSI_COMMAND	2
-#define SCSI_STATUS_	3
-#define SCSI_NOP0	4
-#define SCSI_NOP1	5
-#define SCSI_MSG_OUT	6
-#define SCSI_MSG_IN	7
-
-/*;----SCSI MSG BYTE*/
-#define MSG_COMPLETE		0x00
-#define MSG_EXTENDED		0x01
-#define MSG_SAVE_PTR		0x02
-#define MSG_RESTORE_PTR 	0x03
-#define MSG_DISCONNECT		0x04
-#define MSG_INITIATOR_ERROR	0x05
-#define MSG_ABORT		0x06
-#define MSG_REJECT_		0x07
-#define MSG_NOP 		0x08
-#define MSG_PARITY_ERROR	0x09
-#define MSG_LINK_CMD_COMPL	0x0A
-#define MSG_LINK_CMD_COMPL_FLG	0x0B
-#define MSG_BUS_RESET		0x0C
-#define MSG_ABORT_TAG		0x0D
-#define MSG_SIMPLE_QTAG 	0x20
-#define MSG_HEAD_QTAG		0x21
-#define MSG_ORDER_QTAG		0x22
-#define MSG_IDENTIFY		0x80
-#define MSG_HOST_ID		0x0C0
-
-/*;----SCSI STATUS BYTE*/
-#define STATUS_GOOD		0x00
-#define CHECK_CONDITION_	0x02
-#define STATUS_BUSY		0x08
-#define STATUS_INTERMEDIATE	0x10
-#define RESERVE_CONFLICT	0x18
-
-/* cmd->result */
-#define STATUS_MASK_		0xFF
-#define MSG_MASK		0xFF00
-#define RETURN_MASK		0xFF0000
-
-/*
-**  Inquiry Data format
-*/
-
-typedef struct	_SCSIInqData { /* INQ */
-
-	UCHAR	 DevType;		/* Periph Qualifier & Periph Dev Type*/
-	UCHAR	 RMB_TypeMod;		/* rem media bit & Dev Type Modifier */
-	UCHAR	 Vers;			/* ISO, ECMA, & ANSI versions	     */
-	UCHAR	 RDF;			/* AEN, TRMIOP, & response data format*/
-	UCHAR	 AddLen;		/* length of additional data	     */
-	UCHAR	 Res1;			/* reserved			     */
-	UCHAR	 Res2;			/* reserved			     */
-	UCHAR	 Flags; 		/* RelADr,Wbus32,Wbus16,Sync,etc.    */
-	UCHAR	 VendorID[8];		/* Vendor Identification	     */
-	UCHAR	 ProductID[16]; 	/* Product Identification	     */
-	UCHAR	 ProductRev[4]; 	/* Product Revision		     */
-
-
-} SCSI_INQDATA, *PSCSI_INQDATA;
-
-
-/*  Inquiry byte 0 masks */
-
-
-#define SCSI_DEVTYPE	    0x1F      /* Peripheral Device Type 	    */
-#define SCSI_PERIPHQUAL     0xE0      /* Peripheral Qualifier		    */
-
-
-/*  Inquiry byte 1 mask */
-
-#define SCSI_REMOVABLE_MEDIA  0x80    /* Removable Media bit (1=removable)  */
-
-
-/*  Peripheral Device Type definitions */
-
-#define SCSI_DASD		 0x00	   /* Direct-access Device	   */
-#define SCSI_SEQACESS		 0x01	   /* Sequential-access device	   */
-#define SCSI_PRINTER		 0x02	   /* Printer device		   */
-#define SCSI_PROCESSOR		 0x03	   /* Processor device		   */
-#define SCSI_WRITEONCE		 0x04	   /* Write-once device 	   */
-#define SCSI_CDROM		 0x05	   /* CD-ROM device		   */
-#define SCSI_SCANNER		 0x06	   /* Scanner device		   */
-#define SCSI_OPTICAL		 0x07	   /* Optical memory device	   */
-#define SCSI_MEDCHGR		 0x08	   /* Medium changer device	   */
-#define SCSI_COMM		 0x09	   /* Communications device	   */
-#define SCSI_NODEV		 0x1F	   /* Unknown or no device type    */
-
-/*
-** Inquiry flag definitions (Inq data byte 7)
-*/
-
-#define SCSI_INQ_RELADR       0x80    /* device supports relative addressing*/
-#define SCSI_INQ_WBUS32       0x40    /* device supports 32 bit data xfers  */
-#define SCSI_INQ_WBUS16       0x20    /* device supports 16 bit data xfers  */
-#define SCSI_INQ_SYNC	      0x10    /* device supports synchronous xfer   */
-#define SCSI_INQ_LINKED       0x08    /* device supports linked commands    */
-#define SCSI_INQ_CMDQUEUE     0x02    /* device supports command queueing   */
-#define SCSI_INQ_SFTRE	      0x01    /* device supports soft resets */
-
-
-/*
-;==========================================================
-; EEPROM byte offset
-;==========================================================
-*/
-typedef  struct  _EEprom
-{
-UCHAR	EE_MODE1;
-UCHAR	EE_SPEED;
-UCHAR	xx1;
-UCHAR	xx2;
-} EEprom, *PEEprom;
-
-#define EE_ADAPT_SCSI_ID 64
-#define EE_MODE2	65
-#define EE_DELAY	66
-#define EE_TAG_CMD_NUM	67
-
-/*; EE_MODE1 bits definition*/
-#define PARITY_CHK_	BIT0
-#define SYNC_NEGO_	BIT1
-#define EN_DISCONNECT_	BIT2
-#define SEND_START_	BIT3
-#define TAG_QUEUING_	BIT4
-
-/*; EE_MODE2 bits definition*/
-#define MORE2_DRV	BIT0
-#define GREATER_1G	BIT1
-#define RST_SCSI_BUS	BIT2
-#define ACTIVE_NEGATION BIT3
-#define NO_SEEK 	BIT4
-#define LUN_CHECK	BIT5
-
-#define ENABLE_CE	1
-#define DISABLE_CE	0
-#define EEPROM_READ	0x80
-
-/*
-;==========================================================
-;	AMD 53C974 Registers bit Definition
-;==========================================================
-*/
-/*
-;====================
-; SCSI Register
-;====================
-*/
-
-/*; Command Reg.(+0CH) */
-#define DMA_COMMAND		BIT7
-#define NOP_CMD 		0
-#define CLEAR_FIFO_CMD		1
-#define RST_DEVICE_CMD		2
-#define RST_SCSI_BUS_CMD	3
-#define INFO_XFER_CMD		0x10
-#define INITIATOR_CMD_CMPLTE	0x11
-#define MSG_ACCEPTED_CMD	0x12
-#define XFER_PAD_BYTE		0x18
-#define SET_ATN_CMD		0x1A
-#define RESET_ATN_CMD		0x1B
-#define SELECT_W_ATN		0x42
-#define SEL_W_ATN_STOP		0x43
-#define EN_SEL_RESEL		0x44
-#define SEL_W_ATN2		0x46
-#define DATA_XFER_CMD		INFO_XFER_CMD
-
-
-/*; SCSI Status Reg.(+10H) */
-#define INTERRUPT		BIT7
-#define ILLEGAL_OP_ERR		BIT6
-#define PARITY_ERR		BIT5
-#define COUNT_2_ZERO		BIT4
-#define GROUP_CODE_VALID	BIT3
-#define SCSI_PHASE_MASK 	(BIT2+BIT1+BIT0)
-
-/*; Interrupt Status Reg.(+14H) */
-#define SCSI_RESET_		BIT7
-#define INVALID_CMD		BIT6
-#define DISCONNECTED		BIT5
-#define SERVICE_REQUEST 	BIT4
-#define SUCCESSFUL_OP		BIT3
-#define RESELECTED		BIT2
-#define SEL_ATTENTION		BIT1
-#define SELECTED		BIT0
-
-/*; Internal State Reg.(+18H) */
-#define SYNC_OFFSET_FLAG	BIT3
-#define INTRN_STATE_MASK	(BIT2+BIT1+BIT0)
-
-/*; Clock Factor Reg.(+24H) */
-#define CLK_FREQ_40MHZ		0
-#define CLK_FREQ_35MHZ		(BIT2+BIT1+BIT0)
-#define CLK_FREQ_30MHZ		(BIT2+BIT1)
-#define CLK_FREQ_25MHZ		(BIT2+BIT0)
-#define CLK_FREQ_20MHZ		BIT2
-#define CLK_FREQ_15MHZ		(BIT1+BIT0)
-#define CLK_FREQ_10MHZ		BIT1
-
-/*; Control Reg. 1(+20H) */
-#define EXTENDED_TIMING 	BIT7
-#define DIS_INT_ON_SCSI_RST	BIT6
-#define PARITY_ERR_REPO 	BIT4
-#define SCSI_ID_ON_BUS		(BIT2+BIT1+BIT0)
-
-/*; Control Reg. 2(+2CH) */
-#define EN_FEATURE		BIT6
-#define EN_SCSI2_CMD		BIT3
-
-/*; Control Reg. 3(+30H) */
-#define ID_MSG_CHECK		BIT7
-#define EN_QTAG_MSG		BIT6
-#define EN_GRP2_CMD		BIT5
-#define FAST_SCSI		BIT4	/* ;10MB/SEC */
-#define FAST_CLK		BIT3	/* ;25 - 40 MHZ */
-
-/*; Control Reg. 4(+34H) */
-#define EATER_12NS		0
-#define EATER_25NS		BIT7
-#define EATER_35NS		BIT6
-#define EATER_0NS		(BIT7+BIT6)
-#define NEGATE_REQACKDATA	BIT2
-#define NEGATE_REQACK		BIT3
-/*
-;====================
-; DMA Register
-;====================
-*/
-/*; DMA Command Reg.(+40H) */
-#define READ_DIRECTION		BIT7
-#define WRITE_DIRECTION 	0
-#define EN_DMA_INT		BIT6
-#define MAP_TO_MDL		BIT5
-#define DMA_DIAGNOSTIC		BIT4
-#define DMA_IDLE_CMD		0
-#define DMA_BLAST_CMD		BIT0
-#define DMA_ABORT_CMD		BIT1
-#define DMA_START_CMD		(BIT1+BIT0)
-
-/*; DMA Status Reg.(+54H) */
-#define PCI_MS_ABORT		BIT6
-#define BLAST_COMPLETE		BIT5
-#define SCSI_INTERRUPT		BIT4
-#define DMA_XFER_DONE		BIT3
-#define DMA_XFER_ABORT		BIT2
-#define DMA_XFER_ERROR		BIT1
-#define POWER_DOWN		BIT0
-
-/*
-; DMA SCSI Bus and Ctrl.(+70H)
-;EN_INT_ON_PCI_ABORT
-*/
-
-/*
-;==========================================================
-; SCSI Chip register address offset
-;==========================================================
-*/
-#define CtcReg_Low	0x00
-#define CtcReg_Mid	0x04
-#define ScsiFifo	0x08
-#define ScsiCmd 	0x0C
-#define Scsi_Status	0x10
-#define INT_Status	0x14
-#define Sync_Period	0x18
-#define Sync_Offset	0x1C
-#define CtrlReg1	0x20
-#define Clk_Factor	0x24
-#define CtrlReg2	0x2C
-#define CtrlReg3	0x30
-#define CtrlReg4	0x34
-#define CtcReg_High	0x38
-#define DMA_Cmd 	0x40
-#define DMA_XferCnt	0x44
-#define DMA_XferAddr	0x48
-#define DMA_Wk_ByteCntr 0x4C
-#define DMA_Wk_AddrCntr 0x50
-#define DMA_Status	0x54
-#define DMA_MDL_Addr	0x58
-#define DMA_Wk_MDL_Cntr 0x5C
-#define DMA_ScsiBusCtrl 0x70
-
-#define StcReg_Low	CtcReg_Low
-#define StcReg_Mid	CtcReg_Mid
-#define Scsi_Dest_ID	Scsi_Status
-#define Scsi_TimeOut	INT_Status
-#define Intern_State	Sync_Period
-#define Current_Fifo	Sync_Offset
-#define StcReg_High	CtcReg_High
-
-#define am_target	Scsi_Status
-#define am_timeout	INT_Status
-#define am_seq_step	Sync_Period
-#define am_fifo_count	Sync_Offset
-
-
-#define DC390_read8(address)			       \
-	inb(DC390_ioport + (address)))
-
-#define DC390_read16(address)			       \
-	inw(DC390_ioport + (address)))
-
-#define DC390_read32(address)			       \
-	inl(DC390_ioport + (address)))
-
-#define DC390_write8(address,value)		       \
-	outb((value), DC390_ioport + (address)))
-
-#define DC390_write16(address,value)		       \
-	outw((value), DC390_ioport + (address)))
-
-#define DC390_write32(address,value)		       \
-	outl((value), DC390_ioport + (address)))
-
-
-/* Configuration method #1 */
-#define PCI_CFG1_ADDRESS_REG		0xcf8
-#define PCI_CFG1_DATA_REG		0xcfc
-#define PCI_CFG1_ENABLE 		0x80000000
-#define PCI_CFG1_TUPPLE(bus, device, function, register)		\
-	(PCI_CFG1_ENABLE | (((bus) << 16) & 0xff0000) | 		\
-	(((device) << 11) & 0xf800) | (((function) << 8) & 0x700)|	\
-	(((register) << 2) & 0xfc))
-
-/* Configuration method #2 */
-#define PCI_CFG2_ENABLE_REG		0xcf8
-#define PCI_CFG2_FORWARD_REG		0xcfa
-#define PCI_CFG2_ENABLE 		0x0f0
-#define PCI_CFG2_TUPPLE(function)					\
-	(PCI_CFG2_ENABLE | (((function) << 1) & 0xe))
-
-
-#endif /* TEK390_H */