Add the actual source too :)

Approved by:	re

12 files changed, 9206 insertions, 0 deletions

diff --git a/sys/dev/ixgbe/LICENSE b/sys/dev/ixgbe/LICENSE
new file mode 100644
index 0000000..ab22509
--- /dev/null
+++ b/sys/dev/ixgbe/LICENSE
@@ -0,0 +1,31 @@
+$FreeBSD$
+
+  Copyright (c) 2001-2007, Intel Corporation 
+  All rights reserved.
+  
+  Redistribution and use in source and binary forms, with or without 
+  modification, are permitted provided that the following conditions are met:
+  
+   1. Redistributions of source code must retain the above copyright notice, 
+      this list of conditions and the following disclaimer.
+  
+   2. Redistributions in binary form must reproduce the above copyright 
+      notice, this list of conditions and the following disclaimer in the 
+      documentation and/or other materials provided with the distribution.
+  
+   3. Neither the name of the Intel Corporation nor the names of its 
+      contributors may be used to endorse or promote products derived from 
+      this software without specific prior written permission.
+  
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+  POSSIBILITY OF SUCH DAMAGE.
+
diff --git a/sys/dev/ixgbe/ixgbe.c b/sys/dev/ixgbe/ixgbe.c
new file mode 100644
index 0000000..a43d37f
--- /dev/null
+++ b/sys/dev/ixgbe/ixgbe.c
@@ -0,0 +1,3341 @@
+/*******************************************************************************
+
+Copyright (c) 2001-2007, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+/* $FreeBSD$ */
+
+#ifdef HAVE_KERNEL_OPTION_HEADERS
+#include "opt_device_polling.h"
+#endif
+
+#include <dev/ixgbe/ixgbe.h>
+
+/*********************************************************************
+ *  Set this to one to display debug statistics
+ *********************************************************************/
+int             ixgbe_display_debug_stats = 0;
+
+/*********************************************************************
+ *  Driver version
+ *********************************************************************/
+char ixgbe_driver_version[] = "1.1.3";
+
+/*********************************************************************
+ *  PCI Device ID Table
+ *
+ *  Used by probe to select devices to load on
+ *  Last field stores an index into ixgbe_strings
+ *  Last entry must be all 0s
+ *
+ *  { Vendor ID, Device ID, SubVendor ID, SubDevice ID, String Index }
+ *********************************************************************/
+
+static ixgbe_vendor_info_t ixgbe_vendor_info_array[] =
+{
+	{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598, 0, 0, 0},
+	{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598AF_DUAL_PORT, 0, 0, 0},
+	{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598AF_SINGLE_PORT, 0, 0, 0},
+	{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598AT_DUAL_PORT, 0, 0, 0},
+	/* required last entry */
+	{0, 0, 0, 0, 0}
+};
+
+/*********************************************************************
+ *  Table of branding strings
+ *********************************************************************/
+
+static char    *ixgbe_strings[] = {
+	"Intel(R) PRO/10GbE PCI-Express Network Driver"
+};
+
+/*********************************************************************
+ *  Function prototypes
+ *********************************************************************/
+static int      ixgbe_probe(device_t);
+static int      ixgbe_attach(device_t);
+static int      ixgbe_detach(device_t);
+static int      ixgbe_shutdown(device_t);
+static void     ixgbe_start(struct ifnet *);
+static void     ixgbe_start_locked(struct ifnet *);
+static int      ixgbe_ioctl(struct ifnet *, u_long, caddr_t);
+static void     ixgbe_watchdog(struct adapter *);
+static void     ixgbe_init(void *);
+static void     ixgbe_init_locked(struct adapter *);
+static void     ixgbe_stop(void *);
+static void     ixgbe_media_status(struct ifnet *, struct ifmediareq *);
+static int      ixgbe_media_change(struct ifnet *);
+static void     ixgbe_identify_hardware(struct adapter *);
+static int      ixgbe_allocate_pci_resources(struct adapter *);
+static void     ixgbe_free_pci_resources(struct adapter *);
+static void     ixgbe_local_timer(void *);
+static int      ixgbe_hardware_init(struct adapter *);
+static void     ixgbe_setup_interface(device_t, struct adapter *);
+static int	ixgbe_allocate_queues(struct adapter *);
+static int	ixgbe_allocate_msix_resources(struct adapter *);
+static int	ixgbe_setup_msix(struct adapter *);
+
+static int      ixgbe_allocate_transmit_buffers(struct tx_ring *);
+static int	ixgbe_setup_transmit_structures(struct adapter *);
+static void	ixgbe_setup_transmit_ring(struct tx_ring *);
+static void     ixgbe_initialize_transmit_units(struct adapter *);
+static void     ixgbe_free_transmit_structures(struct adapter *);
+static void     ixgbe_free_transmit_buffers(struct tx_ring *);
+
+static int      ixgbe_allocate_receive_buffers(struct rx_ring *);
+static int      ixgbe_setup_receive_structures(struct adapter *);
+static int	ixgbe_setup_receive_ring(struct rx_ring *);
+static void     ixgbe_initialize_receive_units(struct adapter *);
+static void     ixgbe_free_receive_structures(struct adapter *);
+static void     ixgbe_free_receive_buffers(struct rx_ring *);
+
+static void     ixgbe_enable_intr(struct adapter *);
+static void     ixgbe_disable_intr(struct adapter *);
+static void     ixgbe_update_stats_counters(struct adapter *);
+static boolean_t ixgbe_txeof(struct tx_ring *);
+static int      ixgbe_rxeof(struct rx_ring *, int);
+static void	ixgbe_rx_checksum(struct adapter *, uint32_t, struct mbuf *);
+static void     ixgbe_set_promisc(struct adapter *);
+static void     ixgbe_disable_promisc(struct adapter *);
+static void     ixgbe_set_multi(struct adapter *);
+static void     ixgbe_print_hw_stats(struct adapter *);
+static void	ixgbe_print_debug_info(struct adapter *);
+static void     ixgbe_update_link_status(struct adapter *);
+static int	ixgbe_get_buf(struct rx_ring *, int);
+static void     ixgbe_enable_vlans(struct adapter * adapter);
+static int      ixgbe_encap(struct adapter *, struct mbuf **);
+static int      ixgbe_sysctl_stats(SYSCTL_HANDLER_ARGS);
+static int	ixgbe_sysctl_debug(SYSCTL_HANDLER_ARGS);
+static int	ixgbe_dma_malloc(struct adapter *, bus_size_t,
+		    struct ixgbe_dma_alloc *, int);
+static void     ixgbe_dma_free(struct adapter *, struct ixgbe_dma_alloc *);
+static void	ixgbe_add_rx_process_limit(struct adapter *, const char *,
+		    const char *, int *, int);
+static boolean_t ixgbe_tx_csum_setup(struct tx_ring *, struct mbuf *);
+static boolean_t ixgbe_tso_setup(struct tx_ring *, struct mbuf *, u32 *);
+static void	ixgbe_set_ivar(struct adapter *, u16, u8);
+static void	ixgbe_configure_ivars(struct adapter *);
+
+/* Legacy Interrupt handler */
+static void     ixgbe_intr(void *);
+
+/* The MSI/X Interrupt handlers */
+static void     ixgbe_txint(void *);
+static void     ixgbe_rxint(void *);
+static void     ixgbe_linkint(void *);
+
+
+/*********************************************************************
+ *  FreeBSD Device Interface Entry Points
+ *********************************************************************/
+
+static device_method_t ixgbe_methods[] = {
+	/* Device interface */
+	DEVMETHOD(device_probe, ixgbe_probe),
+	DEVMETHOD(device_attach, ixgbe_attach),
+	DEVMETHOD(device_detach, ixgbe_detach),
+	DEVMETHOD(device_shutdown, ixgbe_shutdown),
+	{0, 0}
+};
+
+static driver_t ixgbe_driver = {
+	"ix", ixgbe_methods, sizeof(struct adapter),
+};
+
+static devclass_t ixgbe_devclass;
+DRIVER_MODULE(ixgbe, pci, ixgbe_driver, ixgbe_devclass, 0, 0);
+
+MODULE_DEPEND(ixgbe, pci, 1, 1, 1);
+MODULE_DEPEND(ixgbe, ether, 1, 1, 1);
+
+/* How many packets rxeof tries to clean at a time */
+static int ixgbe_rx_process_limit = 100;
+TUNABLE_INT("hw.ixgbe.rx_process_limit", &ixgbe_rx_process_limit);
+
+/*
+ * Should the driver do MSI/X and RSS/MQ?
+ *	- default to MSI/X and RSS enabled
+ */
+static int ixgbe_disable_msix = 0;
+TUNABLE_INT("hw.ixgbe.disable_msix", &ixgbe_disable_msix);
+
+/*
+** Flow control tuneable:
+** 	0 - off
+**	1 - rx pause
+**	2 - tx pause
+**	3 - full
+*/
+static int ixgbe_flow_control = 0;
+TUNABLE_INT("hw.ixgbe.flow_control", &ixgbe_flow_control);
+
+/*********************************************************************
+ *  Device identification routine
+ *
+ *  ixgbe_probe determines if the driver should be loaded on
+ *  adapter based on PCI vendor/device id of the adapter.
+ *
+ *  return 0 on success, positive on failure
+ *********************************************************************/
+
+static int
+ixgbe_probe(device_t dev)
+{
+	ixgbe_vendor_info_t *ent;
+
+	u_int16_t       pci_vendor_id = 0;
+	u_int16_t       pci_device_id = 0;
+	u_int16_t       pci_subvendor_id = 0;
+	u_int16_t       pci_subdevice_id = 0;
+	char            adapter_name[60];
+
+	INIT_DEBUGOUT("ixgbe_probe: begin");
+
+	pci_vendor_id = pci_get_vendor(dev);
+	if (pci_vendor_id != IXGBE_INTEL_VENDOR_ID)
+		return (ENXIO);
+
+	pci_device_id = pci_get_device(dev);
+	pci_subvendor_id = pci_get_subvendor(dev);
+	pci_subdevice_id = pci_get_subdevice(dev);
+
+	ent = ixgbe_vendor_info_array;
+	while (ent->vendor_id != 0) {
+		if ((pci_vendor_id == ent->vendor_id) &&
+		    (pci_device_id == ent->device_id) &&
+
+		    ((pci_subvendor_id == ent->subvendor_id) ||
+		     (ent->subvendor_id == 0)) &&
+
+		    ((pci_subdevice_id == ent->subdevice_id) ||
+		     (ent->subdevice_id == 0))) {
+			sprintf(adapter_name, "%s, Version - %s",
+				ixgbe_strings[ent->index],
+				ixgbe_driver_version);
+			device_set_desc_copy(dev, adapter_name);
+			return (0);
+		}
+		ent++;
+	}
+
+	return (ENXIO);
+}
+
+/*********************************************************************
+ *  Device initialization routine
+ *
+ *  The attach entry point is called when the driver is being loaded.
+ *  This routine identifies the type of hardware, allocates all resources
+ *  and initializes the hardware.
+ *
+ *  return 0 on success, positive on failure
+ *********************************************************************/
+
+static int
+ixgbe_attach(device_t dev)
+{
+	struct adapter *adapter;
+	int             error = 0;
+	uint32_t	ctrl_ext;
+
+	INIT_DEBUGOUT("ixgbe_attach: begin");
+
+	/* Allocate, clear, and link in our adapter structure */
+	adapter = device_get_softc(dev);
+	adapter->dev = adapter->osdep.dev = dev;
+	IXGBE_LOCK_INIT(adapter, device_get_nameunit(dev));
+
+	/* SYSCTL APIs */
+	SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
+			SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
+			OID_AUTO, "stats", CTLTYPE_INT | CTLFLAG_RW,
+			adapter, 0, ixgbe_sysctl_stats, "I", "Statistics");
+
+	SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
+			SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
+			OID_AUTO, "debug", CTLTYPE_INT | CTLFLAG_RW,
+			adapter, 0, ixgbe_sysctl_debug, "I", "Debug Info");
+
+	SYSCTL_ADD_INT(device_get_sysctl_ctx(dev),
+			SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
+			OID_AUTO, "flow control", CTLFLAG_RW,
+			&ixgbe_flow_control, 0, "Flow Control");
+
+	/* Set up the timer callout */
+	callout_init_mtx(&adapter->timer, &adapter->mtx, 0);
+
+	/* Determine hardware revision */
+	ixgbe_identify_hardware(adapter);
+
+	/*
+	** Descriptors: (configurable by user), note these are
+	** constant for all rings, I saw no reason to vary 
+	** them, but perhaps someone later would.
+	*/
+	adapter->num_tx_desc = DEFAULT_TXD;
+	adapter->num_rx_desc = DEFAULT_RXD;
+
+	/* Indicate to RX setup to use Jumbo Clusters */
+	adapter->bigbufs = TRUE;
+
+	/* Do base PCI setup - map BAR0 */
+	if (ixgbe_allocate_pci_resources(adapter)) {
+		device_printf(dev, "Allocation of PCI resources failed\n");
+		error = ENXIO;
+		goto err_out;
+	}
+
+	/* Allocate our TX/RX Queues */
+	if (ixgbe_allocate_queues(adapter)) {
+		error = ENOMEM;
+		goto err_out;
+	}
+
+	if (adapter->msix) {
+		error = ixgbe_setup_msix(adapter); 
+		if (error) 
+			goto err_out;
+	}
+
+	/* Initialize the shared code */
+	if (ixgbe_init_shared_code(&adapter->hw)) {
+		device_printf(dev,"Unable to initialize the shared code\n");
+		error = EIO;
+		goto err_out;
+	}
+
+	/* Initialize the hardware */
+	if (ixgbe_hardware_init(adapter)) {
+		device_printf(dev,"Unable to initialize the hardware\n");
+		error = EIO;
+		goto err_out;
+	}
+
+	/* Setup OS specific network interface */
+	ixgbe_setup_interface(dev, adapter);
+
+	/* Sysctl for limiting the amount of work done in the taskqueue */
+	ixgbe_add_rx_process_limit(adapter, "rx_processing_limit",
+	    "max number of rx packets to process", &adapter->rx_process_limit,
+	    ixgbe_rx_process_limit);
+
+	/* Initialize statistics */
+	ixgbe_update_stats_counters(adapter);
+
+	/* let hardware know driver is loaded */
+	ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT);
+	ctrl_ext |= IXGBE_CTRL_EXT_DRV_LOAD;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT, ctrl_ext);
+
+	INIT_DEBUGOUT("ixgbe_attach: end");
+	return (0);
+
+err_out:
+	ixgbe_free_pci_resources(adapter);
+	return (error);
+
+}
+
+/*********************************************************************
+ *  Device removal routine
+ *
+ *  The detach entry point is called when the driver is being removed.
+ *  This routine stops the adapter and deallocates all the resources
+ *  that were allocated for driver operation.
+ *
+ *  return 0 on success, positive on failure
+ *********************************************************************/
+
+static int
+ixgbe_detach(device_t dev)
+{
+	struct adapter *adapter = device_get_softc(dev);
+	u32	ctrl_ext;
+
+	INIT_DEBUGOUT("ixgbe_detach: begin");
+
+	/* Make sure VLANS are not using driver */
+	if (adapter->ifp->if_vlantrunk != NULL) {
+		device_printf(dev,"Vlan in use, detach first\n");
+		return (EBUSY);
+	}
+
+	IXGBE_LOCK(adapter);
+	ixgbe_stop(adapter);
+	IXGBE_UNLOCK(adapter);
+
+	/* let hardware know driver is unloading */
+	ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT);
+	ctrl_ext &= ~IXGBE_CTRL_EXT_DRV_LOAD;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT, ctrl_ext);
+
+	ether_ifdetach(adapter->ifp);
+	callout_drain(&adapter->timer);
+	ixgbe_free_pci_resources(adapter);
+	bus_generic_detach(dev);
+	if_free(adapter->ifp);
+
+	ixgbe_free_transmit_structures(adapter);
+	ixgbe_free_receive_structures(adapter);
+
+	IXGBE_LOCK_DESTROY(adapter);
+	return (0);
+}
+
+/*********************************************************************
+ *
+ *  Shutdown entry point
+ *
+ **********************************************************************/
+
+static int
+ixgbe_shutdown(device_t dev)
+{
+	struct adapter *adapter = device_get_softc(dev);
+	IXGBE_LOCK(adapter);
+	ixgbe_stop(adapter);
+	IXGBE_UNLOCK(adapter);
+	return (0);
+}
+
+
+/*********************************************************************
+ *  Transmit entry point
+ *
+ *  ixgbe_start is called by the stack to initiate a transmit.
+ *  The driver will remain in this routine as long as there are
+ *  packets to transmit and transmit resources are available.
+ *  In case resources are not available stack is notified and
+ *  the packet is requeued.
+ **********************************************************************/
+
+static void
+ixgbe_start_locked(struct ifnet * ifp)
+{
+	struct mbuf    *m_head;
+	struct adapter *adapter = ifp->if_softc;
+
+	IXGBE_LOCK_ASSERT(adapter);
+
+	if ((ifp->if_drv_flags & (IFF_DRV_RUNNING|IFF_DRV_OACTIVE)) !=
+	    IFF_DRV_RUNNING)
+		return;
+	if (!adapter->link_active)
+		return;
+
+	while (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) {
+
+		IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head);
+		if (m_head == NULL)
+			break;
+
+		if (ixgbe_encap(adapter, &m_head)) {
+			if (m_head == NULL)
+				break;
+			ifp->if_drv_flags |= IFF_DRV_OACTIVE;
+			IFQ_DRV_PREPEND(&ifp->if_snd, m_head);
+			break;
+		}
+		/* Send a copy of the frame to the BPF listener */
+		BPF_MTAP(ifp, m_head);
+
+		/* Set timeout in case hardware has problems transmitting */
+		adapter->watchdog_timer = IXGBE_TX_TIMEOUT;
+
+	}
+	return;
+}
+
+static void
+ixgbe_start(struct ifnet *ifp)
+{
+	struct adapter *adapter = ifp->if_softc;
+
+	IXGBE_LOCK(adapter);
+	if (ifp->if_drv_flags & IFF_DRV_RUNNING)
+		ixgbe_start_locked(ifp);
+	IXGBE_UNLOCK(adapter);
+	return;
+}
+
+/*********************************************************************
+ *  Ioctl entry point
+ *
+ *  ixgbe_ioctl is called when the user wants to configure the
+ *  interface.
+ *
+ *  return 0 on success, positive on failure
+ **********************************************************************/
+
+static int
+ixgbe_ioctl(struct ifnet * ifp, u_long command, caddr_t data)
+{
+	int             error = 0;
+	struct ifreq   *ifr = (struct ifreq *) data;
+	struct ifaddr   *ifa = (struct ifaddr *) data;
+	struct adapter *adapter = ifp->if_softc;
+
+	switch (command) {
+	case SIOCSIFADDR:
+		IOCTL_DEBUGOUT("ioctl: SIOCxIFADDR (Get/Set Interface Addr)");
+		if (ifa->ifa_addr->sa_family == AF_INET) {
+			ifp->if_flags |= IFF_UP;
+			if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) {
+				IXGBE_LOCK(adapter);
+				ixgbe_init_locked(adapter);
+				IXGBE_UNLOCK(adapter);
+			}
+			arp_ifinit(ifp, ifa);
+                } else
+			ether_ioctl(ifp, command, data);
+		break;
+	case SIOCSIFMTU:
+		IOCTL_DEBUGOUT("ioctl: SIOCSIFMTU (Set Interface MTU)");
+		if (ifr->ifr_mtu > IXGBE_MAX_FRAME_SIZE - ETHER_HDR_LEN) {
+			error = EINVAL;
+		} else {
+			IXGBE_LOCK(adapter);
+			ifp->if_mtu = ifr->ifr_mtu;
+			adapter->max_frame_size =
+				ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN;
+			ixgbe_init_locked(adapter);
+			IXGBE_UNLOCK(adapter);
+		}
+		break;
+	case SIOCSIFFLAGS:
+		IOCTL_DEBUGOUT("ioctl: SIOCSIFFLAGS (Set Interface Flags)");
+		IXGBE_LOCK(adapter);
+		if (ifp->if_flags & IFF_UP) {
+			if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) {
+				if ((ifp->if_flags ^ adapter->if_flags) &
+				    IFF_PROMISC) {
+					ixgbe_disable_promisc(adapter);
+					ixgbe_set_promisc(adapter);
+                                }
+			} else
+				ixgbe_init_locked(adapter);
+		} else
+			if (ifp->if_drv_flags & IFF_DRV_RUNNING)
+				ixgbe_stop(adapter);
+		adapter->if_flags = ifp->if_flags;
+		IXGBE_UNLOCK(adapter);
+		break;
+	case SIOCADDMULTI:
+	case SIOCDELMULTI:
+		IOCTL_DEBUGOUT("ioctl: SIOC(ADD|DEL)MULTI");
+		if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
+			IXGBE_LOCK(adapter);
+			ixgbe_disable_intr(adapter);
+			ixgbe_set_multi(adapter);
+			ixgbe_enable_intr(adapter);
+			IXGBE_UNLOCK(adapter);
+		}
+		break;
+	case SIOCSIFMEDIA:
+	case SIOCGIFMEDIA:
+		IOCTL_DEBUGOUT("ioctl: SIOCxIFMEDIA (Get/Set Interface Media)");
+		error = ifmedia_ioctl(ifp, ifr, &adapter->media, command);
+		break;
+	case SIOCSIFCAP:
+	{
+		int mask = ifr->ifr_reqcap ^ ifp->if_capenable;
+		IOCTL_DEBUGOUT("ioctl: SIOCSIFCAP (Set Capabilities)");
+		if (mask & IFCAP_HWCSUM)
+			ifp->if_capenable ^= IFCAP_HWCSUM;
+		if (mask & IFCAP_TSO4)
+			ifp->if_capenable ^= IFCAP_TSO4;
+		if (mask & IFCAP_VLAN_HWTAGGING)
+			ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING;
+		if (ifp->if_drv_flags & IFF_DRV_RUNNING)
+			ixgbe_init(adapter);
+		VLAN_CAPABILITIES(ifp);
+		break;
+	}
+	default:
+		IOCTL_DEBUGOUT1("ioctl: UNKNOWN (0x%X)\n", (int)command);
+		error = ether_ioctl(ifp, command, data);
+		break;
+	}
+
+	return (error);
+}
+
+/*********************************************************************
+ *  Watchdog entry point
+ *
+ *  This routine is called whenever hardware quits transmitting.
+ *
+ **********************************************************************/
+
+static void
+ixgbe_watchdog(struct adapter *adapter)
+{
+
+	IXGBE_LOCK_ASSERT(adapter);
+
+        /*
+         * The timer is set to 5 every time ixgbe_start() queues a packet.
+         * Then ixgbe_txeof() keeps resetting to 5 as long as it cleans at
+         * least one descriptor.
+         * Finally, anytime all descriptors are clean the timer is
+         * set to 0.
+         */
+        if (adapter->watchdog_timer == 0 || --adapter->watchdog_timer)
+                return;
+
+	/*
+	 * If we are in this routine because of pause frames, then don't
+	 * reset the hardware.
+	 */
+	if (IXGBE_READ_REG(&adapter->hw, IXGBE_TFCS) & IXGBE_TFCS_TXOFF) {
+		adapter->watchdog_timer = IXGBE_TX_TIMEOUT;
+		return;
+	}
+
+
+	device_printf(adapter->dev, "Watchdog timeout -- resetting\n");
+	ixgbe_print_debug_info(adapter);
+
+	adapter->ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
+	adapter->watchdog_events++;
+
+	ixgbe_init_locked(adapter);
+
+}
+
+/*********************************************************************
+ *  Init entry point
+ *
+ *  This routine is used in two ways. It is used by the stack as
+ *  init entry point in network interface structure. It is also used
+ *  by the driver as a hw/sw initialization routine to get to a
+ *  consistent state.
+ *
+ *  return 0 on success, positive on failure
+ **********************************************************************/
+#define IXGBE_MHADD_MFS_SHIFT 16
+
+static void
+ixgbe_init_locked(struct adapter *adapter)
+{
+	struct ifnet   *ifp = adapter->ifp;
+	device_t 	dev = adapter->dev;
+	u32		txdctl, rxdctl, mhadd;
+
+	INIT_DEBUGOUT("ixgbe_init: begin");
+
+	IXGBE_LOCK_ASSERT(adapter);
+
+	ixgbe_stop(adapter);
+
+	/* Get the latest mac address, User can use a LAA */
+	bcopy(IF_LLADDR(adapter->ifp), adapter->hw.mac.addr,
+	      IXGBE_ETH_LENGTH_OF_ADDRESS);
+
+	/* Initialize the hardware */
+	if (ixgbe_hardware_init(adapter)) {
+		device_printf(dev, "Unable to initialize the hardware\n");
+		return;
+	}
+
+	if (ifp->if_capenable & IFCAP_VLAN_HWTAGGING)
+		ixgbe_enable_vlans(adapter);
+
+	/* Prepare transmit descriptors and buffers */
+	if (ixgbe_setup_transmit_structures(adapter)) {
+		device_printf(dev,"Could not setup transmit structures\n");
+		ixgbe_stop(adapter);
+		return;
+	}
+
+	ixgbe_initialize_transmit_units(adapter);
+
+	/* Setup Multicast table */
+	ixgbe_set_multi(adapter);
+
+	/*
+	** If we are resetting MTU smaller than 2K
+	** drop to small RX buffers
+	*/
+	if (adapter->max_frame_size <= MCLBYTES)
+		adapter->bigbufs = FALSE;
+
+	/* Prepare receive descriptors and buffers */
+	if (ixgbe_setup_receive_structures(adapter)) {
+		device_printf(dev,"Could not setup receive structures\n");
+		ixgbe_stop(adapter);
+		return;
+	}
+
+	/* Configure RX settings */
+	ixgbe_initialize_receive_units(adapter);
+
+	/* Enable Enhanced MSIX mode */
+	if (adapter->msix) {
+		u32	gpie;
+		gpie = IXGBE_READ_REG(&adapter->hw, IXGBE_GPIE);
+		gpie |= IXGBE_GPIE_MSIX_MODE;
+		gpie |= IXGBE_GPIE_EIAME | IXGBE_GPIE_PBA_SUPPORT |
+		    IXGBE_GPIE_OCD;
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_GPIE, gpie);
+		gpie = IXGBE_READ_REG(&adapter->hw, IXGBE_GPIE);
+	}
+
+	/* Set the various hardware offload abilities */
+	ifp->if_hwassist = 0;
+	if (ifp->if_capenable & IFCAP_TSO4)
+		ifp->if_hwassist |= CSUM_TSO;
+	else if (ifp->if_capenable & IFCAP_TXCSUM)
+		ifp->if_hwassist = (CSUM_TCP | CSUM_UDP);
+
+	/* Set MTU size */
+	if (ifp->if_mtu > ETHERMTU) {
+		mhadd = IXGBE_READ_REG(&adapter->hw, IXGBE_MHADD);
+		mhadd &= ~IXGBE_MHADD_MFS_MASK;
+		mhadd |= adapter->max_frame_size << IXGBE_MHADD_MFS_SHIFT;
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_MHADD, mhadd);
+	}
+	
+	/* Now enable all the queues */
+
+	for (int i = 0; i < adapter->num_tx_queues; i++) {
+		txdctl = IXGBE_READ_REG(&adapter->hw, IXGBE_TXDCTL(i));
+		txdctl |= IXGBE_TXDCTL_ENABLE;
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_TXDCTL(i), txdctl);
+	}
+
+	for (int i = 0; i < adapter->num_rx_queues; i++) {
+		rxdctl = IXGBE_READ_REG(&adapter->hw, IXGBE_RXDCTL(i));
+		rxdctl |= IXGBE_RXDCTL_ENABLE;
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXDCTL(i), rxdctl);
+	}
+
+	callout_reset(&adapter->timer, hz, ixgbe_local_timer, adapter);
+
+	/* Set up MSI/X routing */
+	ixgbe_configure_ivars(adapter);
+
+	ixgbe_enable_intr(adapter);
+
+	/* Now inform the stack we're ready */
+	ifp->if_drv_flags |= IFF_DRV_RUNNING;
+	ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
+
+	return;
+}
+
+static void
+ixgbe_init(void *arg)
+{
+	struct adapter *adapter = arg;
+
+	IXGBE_LOCK(adapter);
+	ixgbe_init_locked(adapter);
+	IXGBE_UNLOCK(adapter);
+	return;
+}
+
+
+/*********************************************************************
+ *
+ *  Legacy Interrupt Service routine
+ *
+ **********************************************************************/
+
+static void
+ixgbe_intr(void *arg)
+{
+	u32       loop_cnt = MAX_INTR;
+	u32       reg_eicr;
+	struct adapter *adapter = arg;
+	struct ifnet   *ifp = adapter->ifp;
+	struct rx_ring *rxr = adapter->rx_rings;
+	struct tx_ring *txr = adapter->tx_rings;
+
+	IXGBE_LOCK(adapter);
+
+	reg_eicr = IXGBE_READ_REG(&adapter->hw, IXGBE_EICR);
+	if (reg_eicr == 0) {
+		IXGBE_UNLOCK(adapter);
+		return;
+	}
+
+	/* Link status change */
+	if (reg_eicr & IXGBE_EICR_LSC) {
+		callout_stop(&adapter->timer);
+		ixgbe_update_link_status(adapter);
+		callout_reset(&adapter->timer, hz,
+		    ixgbe_local_timer, adapter);
+	}
+
+	while ((--loop_cnt > 0) && 
+	    (ifp->if_drv_flags & IFF_DRV_RUNNING)) {
+			ixgbe_rxeof(rxr, adapter->rx_process_limit);
+			ixgbe_txeof(txr);
+	}
+
+	if (ifp->if_drv_flags & IFF_DRV_RUNNING &&
+	    ifp->if_snd.ifq_head != NULL)
+		ixgbe_start_locked(ifp);
+
+	IXGBE_UNLOCK(adapter);
+	return;
+}
+
+
+/*********************************************************************
+ *
+ *  MSI TX Interrupt Service routine
+ *
+ **********************************************************************/
+
+void
+ixgbe_txint(void *arg)
+{
+	struct tx_ring *txr = arg;
+	struct adapter *adapter = txr->adapter;
+	struct ifnet   *ifp = adapter->ifp;
+	uint32_t       loop_cnt = MAX_INTR;
+
+	IXGBE_LOCK(adapter);
+
+	while (loop_cnt > 0) {
+		if (__predict_false(!ixgbe_txeof(txr)))
+			break;
+		loop_cnt--;
+	}
+
+	if (ifp->if_drv_flags & IFF_DRV_RUNNING &&
+	    ifp->if_snd.ifq_head != NULL)
+		ixgbe_start_locked(ifp);
+	ixgbe_enable_intr(adapter);
+	IXGBE_UNLOCK(adapter);
+	return;
+}
+
+/*********************************************************************
+ *
+ *  MSI RX Interrupt Service routine
+ *
+ **********************************************************************/
+
+static void
+ixgbe_rxint(void *arg)
+{
+	struct rx_ring	*rxr = arg;
+	struct adapter	*adapter = rxr->adapter;
+	struct ifnet	*ifp = adapter->ifp;
+	//uint32_t       reg_eicr, loop = MAX_INTR;
+	uint32_t	loop = MAX_INTR;
+
+
+	IXGBE_LOCK(adapter);
+
+	while ((loop-- > 0) && (ifp->if_drv_flags & IFF_DRV_RUNNING))
+		ixgbe_rxeof(rxr, adapter->rx_process_limit);
+
+	ixgbe_enable_intr(adapter);
+	IXGBE_UNLOCK(adapter);
+}
+
+static void
+ixgbe_linkint(void *arg)
+{
+	struct adapter	*adapter = arg;
+	uint32_t       reg_eicr;
+
+	IXGBE_LOCK(adapter);
+
+	reg_eicr = IXGBE_READ_REG(&adapter->hw, IXGBE_EICR);
+
+	if (reg_eicr & IXGBE_EICR_LSC) {
+		callout_stop(&adapter->timer);
+		ixgbe_update_link_status(adapter);
+		callout_reset(&adapter->timer, hz,
+		    ixgbe_local_timer, adapter);
+	}
+
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, IXGBE_EIMS_OTHER);
+	ixgbe_enable_intr(adapter);
+	IXGBE_UNLOCK(adapter);
+}
+
+/*********************************************************************
+ *
+ *  Media Ioctl callback
+ *
+ *  This routine is called whenever the user queries the status of
+ *  the interface using ifconfig.
+ *
+ **********************************************************************/
+static void
+ixgbe_media_status(struct ifnet * ifp, struct ifmediareq * ifmr)
+{
+	struct adapter *adapter = ifp->if_softc;
+
+	INIT_DEBUGOUT("ixgbe_media_status: begin");
+	ixgbe_update_link_status(adapter);
+
+	ifmr->ifm_status = IFM_AVALID;
+	ifmr->ifm_active = IFM_ETHER;
+
+	if (!adapter->link_active)
+		return;
+
+	ifmr->ifm_status |= IFM_ACTIVE;
+	ifmr->ifm_active |= IFM_10G_SR | IFM_FDX;
+
+	return;
+}
+
+/*********************************************************************
+ *
+ *  Media Ioctl callback
+ *
+ *  This routine is called when the user changes speed/duplex using
+ *  media/mediopt option with ifconfig.
+ *
+ **********************************************************************/
+static int
+ixgbe_media_change(struct ifnet * ifp)
+{
+	struct adapter *adapter = ifp->if_softc;
+	struct ifmedia *ifm = &adapter->media;
+
+	INIT_DEBUGOUT("ixgbe_media_change: begin");
+
+	if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER)
+		return (EINVAL);
+
+	return (0);
+}
+
+/*********************************************************************
+ *
+ *  This routine maps the mbufs to tx descriptors.
+ *    WARNING: while this code is using an MQ style infrastructure,
+ *    it would NOT work as is with more than 1 queue.
+ *
+ *  return 0 on success, positive on failure
+ **********************************************************************/
+
+static int
+ixgbe_encap(struct adapter *adapter, struct mbuf **m_headp)
+{
+	u32		olinfo_status = 0, cmd_type_len = 0;
+	u32		paylen;
+	int             i, j, error, nsegs;
+	int		first, last = 0;
+	struct mbuf	*m_head;
+	bus_dma_segment_t segs[IXGBE_MAX_SCATTER];
+	bus_dmamap_t	map;
+	struct tx_ring  *txr = adapter->tx_rings;
+	struct ixgbe_tx_buf *txbuf, *txbuf_mapped;
+	union ixgbe_adv_tx_desc *txd = NULL;
+
+	m_head = *m_headp;
+	paylen = 0;
+
+	/* Basic descriptor defines */
+        cmd_type_len |= IXGBE_ADVTXD_DTYP_DATA;
+        cmd_type_len |= IXGBE_ADVTXD_DCMD_IFCS | IXGBE_ADVTXD_DCMD_DEXT;
+	if (m_head->m_flags & M_VLANTAG)
+        	cmd_type_len |= IXGBE_ADVTXD_DCMD_VLE;
+
+	/*
+	 * Force a cleanup if number of TX descriptors
+	 * available is below the threshold. If it fails
+	 * to get above, then abort transmit.
+	 */
+	if (txr->tx_avail <= IXGBE_TX_CLEANUP_THRESHOLD) {
+		ixgbe_txeof(txr);
+		/* Make sure things have improved */
+		if (txr->tx_avail <= IXGBE_TX_OP_THRESHOLD) {
+			adapter->no_tx_desc_avail1++;
+			return (ENOBUFS);
+		}
+	}
+
+        /*
+         * Important to capture the first descriptor
+         * used because it will contain the index of
+         * the one we tell the hardware to report back
+         */
+        first = txr->next_avail_tx_desc;
+	txbuf = &txr->tx_buffers[first];
+	txbuf_mapped = txbuf;
+	map = txbuf->map;
+
+	/*
+	 * Map the packet for DMA.
+	 */
+	error = bus_dmamap_load_mbuf_sg(txr->txtag, map,
+	    *m_headp, segs, &nsegs, BUS_DMA_NOWAIT);
+
+	if (error == EFBIG) {
+		struct mbuf *m;
+
+		m = m_defrag(*m_headp, M_DONTWAIT);
+		if (m == NULL) {
+			adapter->mbuf_alloc_failed++;
+			m_freem(*m_headp);
+			*m_headp = NULL;
+			return (ENOBUFS);
+		}
+		*m_headp = m;
+
+		/* Try it again */
+		error = bus_dmamap_load_mbuf_sg(txr->txtag, map,
+		    *m_headp, segs, &nsegs, BUS_DMA_NOWAIT);
+
+		if (error == ENOMEM) {
+			adapter->no_tx_dma_setup++;
+			return (error);
+		} else if (error != 0) {
+			adapter->no_tx_dma_setup++;
+			m_freem(*m_headp);
+			*m_headp = NULL;
+			return (error);
+		}
+	} else if (error == ENOMEM) {
+		adapter->no_tx_dma_setup++;
+		return (error);
+	} else if (error != 0) {
+		adapter->no_tx_dma_setup++;
+		m_freem(*m_headp);
+		*m_headp = NULL;
+		return (error);
+	}
+
+	/* Make certain there are enough descriptors */
+	if (nsegs > txr->tx_avail - 2) {
+		adapter->no_tx_desc_avail2++;
+		error = ENOBUFS;
+		goto encap_fail;
+	}
+	m_head = *m_headp;
+
+	/*
+	** Set the appropriate offload context
+	** this becomes the first descriptor of 
+	** a packet.
+	*/
+	if (ixgbe_tso_setup(txr, m_head, &paylen)) {
+		cmd_type_len |= IXGBE_ADVTXD_DCMD_TSE;
+		olinfo_status |= IXGBE_TXD_POPTS_IXSM << 8;
+		olinfo_status |= IXGBE_TXD_POPTS_TXSM << 8;
+		olinfo_status |= paylen << IXGBE_ADVTXD_PAYLEN_SHIFT;
+		++adapter->tso_tx;
+	} else if (m_head->m_pkthdr.csum_flags & CSUM_OFFLOAD) {
+		if (ixgbe_tx_csum_setup(txr, m_head))
+			olinfo_status |= IXGBE_TXD_POPTS_TXSM << 8;
+	}
+
+	i = txr->next_avail_tx_desc;
+	for (j = 0; j < nsegs; j++) {
+		bus_size_t seglen;
+		bus_addr_t segaddr;
+
+		txbuf = &txr->tx_buffers[i];
+		txd = &txr->tx_base[i];
+		seglen = segs[j].ds_len;
+		segaddr = htole64(segs[j].ds_addr);
+
+		txd->read.buffer_addr = segaddr;
+		txd->read.cmd_type_len = htole32(txr->txd_cmd |
+		    cmd_type_len |seglen);
+		txd->read.olinfo_status = htole32(olinfo_status);
+		last = i; /* Next descriptor that will get completed */
+
+		if (++i == adapter->num_tx_desc)
+			i = 0;
+
+		txbuf->m_head = NULL;
+		txbuf->next_eop = -1;
+		/*
+		** we have to do this inside the loop right now
+		** because of the hardware workaround.
+		*/
+		if (j == (nsegs -1)) /* Last descriptor gets EOP and RS */
+			txd->read.cmd_type_len |=
+			    htole32(IXGBE_TXD_CMD_EOP | IXGBE_TXD_CMD_RS);
+	}
+
+	txr->tx_avail -= nsegs;
+	txr->next_avail_tx_desc = i;
+
+	txbuf->m_head = m_head;
+	txbuf->map = map;
+	bus_dmamap_sync(txr->txtag, map, BUS_DMASYNC_PREWRITE);
+
+        /* Set the index of the descriptor that will be marked done */
+        txbuf = &txr->tx_buffers[first];
+        txbuf->next_eop = last;
+
+        bus_dmamap_sync(txr->txdma.dma_tag, txr->txdma.dma_map,
+            BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
+	/*
+	 * Advance the Transmit Descriptor Tail (Tdt), this tells the
+	 * hardware that this frame is available to transmit.
+	 */
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_TDT(txr->me), i);
+	return (0);
+
+encap_fail:
+	bus_dmamap_unload(txr->txtag, txbuf->map);
+	return (error);
+
+}
+
+static void
+ixgbe_set_promisc(struct adapter *adapter)
+{
+
+	u_int32_t       reg_rctl;
+	struct ifnet   *ifp = adapter->ifp;
+
+	reg_rctl = IXGBE_READ_REG(&adapter->hw, IXGBE_FCTRL);
+
+	if (ifp->if_flags & IFF_PROMISC) {
+		reg_rctl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, reg_rctl);
+	} else if (ifp->if_flags & IFF_ALLMULTI) {
+		reg_rctl |= IXGBE_FCTRL_MPE;
+		reg_rctl &= ~IXGBE_FCTRL_UPE;
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, reg_rctl);
+	}
+	return;
+}
+
+static void
+ixgbe_disable_promisc(struct adapter * adapter)
+{
+	u_int32_t       reg_rctl;
+
+	reg_rctl = IXGBE_READ_REG(&adapter->hw, IXGBE_FCTRL);
+
+	reg_rctl &= (~IXGBE_FCTRL_UPE);
+	reg_rctl &= (~IXGBE_FCTRL_MPE);
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, reg_rctl);
+
+	return;
+}
+
+
+/*********************************************************************
+ *  Multicast Update
+ *
+ *  This routine is called whenever multicast address list is updated.
+ *
+ **********************************************************************/
+#define IXGBE_RAR_ENTRIES 16
+
+static void
+ixgbe_set_multi(struct adapter *adapter)
+{
+	uint32_t fctrl;
+	uint8_t mta[MAX_NUM_MULTICAST_ADDRESSES * IXGBE_ETH_LENGTH_OF_ADDRESS];
+	struct ifmultiaddr *ifma;
+	int             mcnt = 0;
+	struct ifnet   *ifp = adapter->ifp;
+
+	IOCTL_DEBUGOUT("ixgbe_set_multi: begin");
+
+	fctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_FCTRL);
+	fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
+	if (ifp->if_flags & IFF_PROMISC)
+		fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
+	else if (ifp->if_flags & IFF_ALLMULTI) {
+		fctrl |= IXGBE_FCTRL_MPE;
+		fctrl &= ~IXGBE_FCTRL_UPE;
+	} else
+		fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
+	
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, fctrl);
+
+	IF_ADDR_LOCK(ifp);
+	TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
+		if (ifma->ifma_addr->sa_family != AF_LINK)
+			continue;
+		bcopy(LLADDR((struct sockaddr_dl *) ifma->ifma_addr),
+		    &mta[mcnt * IXGBE_ETH_LENGTH_OF_ADDRESS],
+		    IXGBE_ETH_LENGTH_OF_ADDRESS);
+		mcnt++;
+	}
+	IF_ADDR_UNLOCK(ifp);
+
+	ixgbe_update_mc_addr_list(&adapter->hw, mta, mcnt, 0);
+
+	return;
+}
+
+
+/*********************************************************************
+ *  Timer routine
+ *
+ *  This routine checks for link status,updates statistics,
+ *  and runs the watchdog timer.
+ *
+ **********************************************************************/
+
+static void
+ixgbe_local_timer(void *arg)
+{
+	struct adapter *adapter = arg;
+	struct ifnet   *ifp = adapter->ifp;
+
+	IXGBE_LOCK_ASSERT(adapter);
+
+	ixgbe_update_link_status(adapter);
+	ixgbe_update_stats_counters(adapter);
+	if (ixgbe_display_debug_stats && ifp->if_drv_flags & IFF_DRV_RUNNING) {
+		ixgbe_print_hw_stats(adapter);
+	}
+	/*
+	 * Each second we check the watchdog
+	 * to protect against hardware hangs.
+	 */
+	ixgbe_watchdog(adapter);
+
+	callout_reset(&adapter->timer, hz, ixgbe_local_timer, adapter);
+}
+
+static void
+ixgbe_update_link_status(struct adapter *adapter)
+{
+	uint32_t  link_speed;
+	boolean_t link_up = FALSE;
+	struct ifnet	*ifp = adapter->ifp;
+	device_t dev = adapter->dev;
+
+	ixgbe_check_link(&adapter->hw, &link_speed, &link_up);
+
+	if (link_up){ 
+		if (adapter->link_active == FALSE) {
+			if (bootverbose)
+				device_printf(dev,"Link is up %d Mbps %s \n",
+				    10000, "Full Duplex");
+			adapter->link_active = TRUE;
+			if_link_state_change(ifp, LINK_STATE_UP);
+		}
+	} else { /* Link down */
+		if (adapter->link_active == TRUE) {
+			if (bootverbose)
+				device_printf(dev,"Link is Down\n");
+			if_link_state_change(ifp, LINK_STATE_DOWN);
+			adapter->link_active = FALSE;
+		}
+	}
+
+	return;
+}
+
+
+
+/*********************************************************************
+ *
+ *  This routine disables all traffic on the adapter by issuing a
+ *  global reset on the MAC and deallocates TX/RX buffers.
+ *
+ **********************************************************************/
+
+static void
+ixgbe_stop(void *arg)
+{
+	struct ifnet   *ifp;
+	struct adapter *adapter = arg;
+	ifp = adapter->ifp;
+
+	IXGBE_LOCK_ASSERT(adapter);
+
+	INIT_DEBUGOUT("ixgbe_stop: begin\n");
+	ixgbe_disable_intr(adapter);
+
+	/* Tell the stack that the interface is no longer active */
+	ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
+
+	ixgbe_reset_hw(&adapter->hw);
+	adapter->hw.adapter_stopped = FALSE;
+	ixgbe_stop_adapter(&adapter->hw);
+	callout_stop(&adapter->timer);
+
+	ixgbe_reset_hw(&adapter->hw);
+
+	return;
+}
+
+
+/*********************************************************************
+ *
+ *  Determine hardware revision.
+ *
+ **********************************************************************/
+static void
+ixgbe_identify_hardware(struct adapter *adapter)
+{
+	device_t        dev = adapter->dev;
+
+	/* Save off the information about this board */
+	adapter->hw.vendor_id = pci_get_vendor(dev);
+	adapter->hw.device_id = pci_get_device(dev);
+	adapter->hw.revision_id = pci_read_config(dev, PCIR_REVID, 1);
+	adapter->hw.subsystem_vendor_id =
+	    pci_read_config(dev, PCIR_SUBVEND_0, 2);
+	adapter->hw.subsystem_device_id =
+	    pci_read_config(dev, PCIR_SUBDEV_0, 2);
+
+	return;
+}
+
+/*********************************************************************
+ *
+ *  Setup MSIX: this is a prereq for doing Multiqueue/RSS.
+ *
+ **********************************************************************/
+static int
+ixgbe_setup_msix(struct adapter *adapter)
+{
+	device_t        dev = adapter->dev;
+	struct 		tx_ring *txr = adapter->tx_rings;
+	struct		rx_ring *rxr = adapter->rx_rings;
+	int 		error, vector = 0;
+
+	/* TX setup: the code is here for multi tx,
+	   there are other parts of the driver not ready for it */
+	for (int i = 0; i < adapter->num_tx_queues; i++, vector++, txr++) {
+		adapter->res[vector] = bus_alloc_resource_any(dev,
+	    	    SYS_RES_IRQ, &adapter->rid[vector],
+		    RF_SHAREABLE | RF_ACTIVE);
+		if (!adapter->res[vector]) {
+			device_printf(dev,"Unable to allocate"
+		    	    " bus resource: tx interrupt [%d]\n", vector);
+			return (ENXIO);
+		}
+		/* Set the handler function */
+		error = bus_setup_intr(dev, adapter->res[vector],
+		    INTR_TYPE_NET | INTR_MPSAFE, NULL,
+		    ixgbe_txint, txr, &adapter->tag[vector]);
+		if (error) {
+			adapter->res[vector] = NULL;
+			device_printf(dev, "Failed to register TX handler");
+			return (error);
+		}
+		adapter->msix++;
+	}
+
+	/* RX setup */
+	for (int i = 0; i < adapter->num_rx_queues; i++, vector++, rxr++) {
+		adapter->res[vector] = bus_alloc_resource_any(dev,
+	    	    SYS_RES_IRQ, &adapter->rid[vector],
+		    RF_SHAREABLE | RF_ACTIVE);
+		if (!adapter->res[vector]) {
+			device_printf(dev,"Unable to allocate"
+		    	    " bus resource: rx interrupt [%d],"
+			    "rid = %d\n", i, adapter->rid[vector]);
+			return (ENXIO);
+		}
+		/* Set the handler function */
+		error = bus_setup_intr(dev, adapter->res[vector],
+		    INTR_TYPE_NET | INTR_MPSAFE, NULL, ixgbe_rxint,
+		    rxr, &adapter->tag[vector]);
+		if (error) {
+			adapter->res[vector] = NULL;
+			device_printf(dev, "Failed to register RX handler");
+			return (error);
+		}
+		adapter->msix++;
+	}
+
+	/* Now for Link changes */
+	adapter->res[vector] = bus_alloc_resource_any(dev,
+    	    SYS_RES_IRQ, &adapter->rid[vector], RF_SHAREABLE | RF_ACTIVE);
+	if (!adapter->res[vector]) {
+		device_printf(dev,"Unable to allocate"
+    	    " bus resource: Link interrupt [%d]\n", adapter->rid[vector]);
+		return (ENXIO);
+	}
+	/* Set the link handler function */
+	error = bus_setup_intr(dev, adapter->res[vector],
+	    INTR_TYPE_NET | INTR_MPSAFE, NULL, ixgbe_linkint,
+	    adapter, &adapter->tag[vector]);
+	if (error) {
+		adapter->res[vector] = NULL;
+		device_printf(dev, "Failed to register LINK handler");
+		return (error);
+	}
+	adapter->msix++;
+
+	return (0);
+}
+
+static int
+ixgbe_allocate_pci_resources(struct adapter *adapter)
+{
+	int             error, rid;
+	device_t        dev = adapter->dev;
+
+	rid = PCIR_BAR(0);
+	adapter->res_memory = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
+	    &rid, RF_ACTIVE);
+
+	if (!(adapter->res_memory)) {
+		device_printf(dev,"Unable to allocate bus resource: memory\n");
+		return (ENXIO);
+	}
+
+	adapter->osdep.mem_bus_space_tag =
+		rman_get_bustag(adapter->res_memory);
+	adapter->osdep.mem_bus_space_handle =
+		rman_get_bushandle(adapter->res_memory);
+	adapter->hw.hw_addr = (uint8_t *) &adapter->osdep.mem_bus_space_handle;
+
+	/*
+	 * First try to setup MSI/X interrupts,
+	 * if that fails fall back to Legacy.
+	 */
+	if (ixgbe_allocate_msix_resources(adapter)) {
+		adapter->num_tx_queues = 1;
+		adapter->num_rx_queues = 1;
+		adapter->msix = 0;
+		rid = 0;
+		adapter->res[0] = bus_alloc_resource_any(dev,
+		    SYS_RES_IRQ, &adapter->rid[0], RF_SHAREABLE | RF_ACTIVE);
+		if (adapter->res[0] == NULL) {
+			device_printf(dev, "Unable to allocate bus "
+			    "resource: interrupt\n");
+			return (ENXIO);
+		}
+		/* Set the handler function */
+		error = bus_setup_intr(dev, adapter->res[0],
+		    INTR_TYPE_NET | INTR_MPSAFE, NULL,
+		    ixgbe_intr, adapter, &adapter->tag[0]);
+		if (error) {
+			adapter->res[0] = NULL;
+			device_printf(dev, "Failed to register Legacy handler");
+			return (error);
+		}
+	}
+
+	adapter->hw.back = &adapter->osdep;
+	return (0);
+}
+
+/*
+ * Attempt to configure MSI/X, the prefered
+ * interrupt option.
+ */
+static int
+ixgbe_allocate_msix_resources(struct adapter *adapter)
+{
+	int             error, val, want, rid;
+	device_t        dev = adapter->dev;
+	int		vector = 1;
+
+	/* An artificial means to force it off */
+	if (ixgbe_disable_msix)
+		return (-1);
+
+	/* First map the MSIX table */
+	rid = PCIR_BAR(3);
+	adapter->res_msix = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
+	    &rid, RF_ACTIVE);
+	if (!adapter->res_msix) {
+		device_printf(dev,"Unable to map MSIX table \n");
+			return (ENXIO);
+      	}
+
+	/* Now figure out now many vectors we need to use */
+	val = pci_msix_count(dev); 
+
+	/* check configured values */
+	want = IXGBE_TX_QUEUES + IXGBE_RX_QUEUES + IXGBE_OTHER;
+	/*
+	 *  We arent going to do anything fancy for now,
+	 *  we either can meet desired config or we fail.
+	 */
+	if (val >= want) 
+		val = want;
+	else {
+		device_printf(dev, "FAIL MSI/X setup:\n"
+		   "\tqueues wanted = %d\n"
+		   "\tqueues available = %d\n"
+		   "\tPlease reconfigure settings\n", want, val);
+		return (ENXIO);
+	}
+
+	/* Initialize the resource arrays */
+	for (int i = 0; i < IXGBE_MSGS; i++, vector++) {
+		adapter->rid[i] = vector;
+		adapter->tag[i] = NULL;
+		adapter->res[i] = NULL;
+	}
+
+	adapter->num_tx_queues = IXGBE_TX_QUEUES;
+	adapter->num_rx_queues = IXGBE_RX_QUEUES;
+
+	/* Now allocate the vectors */	
+	if ((error = pci_alloc_msix(dev, &val)) == 0) {
+		adapter->msix = 1;
+		device_printf(dev,
+		    "MSI/X enabled with %d vectors\n", val);
+	} else {
+		device_printf(dev,
+		    "FAIL pci_alloc_msix() %d\n", error);
+		return (error);
+	}
+	return (0);
+}
+
+static void
+ixgbe_free_pci_resources(struct adapter * adapter)
+{
+	device_t dev = adapter->dev;
+	int		i, loop;
+
+	/*
+	 * Legacy has this set to 0, but we need
+	 * to run this once, so reset it.
+	 */
+	if (adapter->msix)
+		loop = adapter->msix;
+	else
+		loop = 1;
+	/*
+	 * First release all the interrupt resources:
+	 * 	notice that since these are just kept
+	 *	in an array we can do the same logic
+	 * 	whether its MSIX or just legacy.
+	 */
+	for (i = 0; i < loop; i++) {
+		if (adapter->tag[i] != NULL) {
+			bus_teardown_intr(dev, adapter->res[i],
+			    adapter->tag[i]);
+			adapter->tag[i] = NULL;
+		}
+		if (adapter->res[i] != NULL) {
+			bus_release_resource(dev, SYS_RES_IRQ,
+			    adapter->rid[i], adapter->res[i]);
+		}
+	}
+
+	if (adapter->msix)
+		pci_release_msi(dev);
+
+	if (adapter->res_memory != NULL)
+		bus_release_resource(dev, SYS_RES_MEMORY,
+		    IXGBE_MMBA, adapter->res_memory);
+
+	return;
+}
+
+/*********************************************************************
+ *
+ *  Initialize the hardware to a configuration as specified by the
+ *  adapter structure. The controller is reset, the EEPROM is
+ *  verified, the MAC address is set, then the shared initialization
+ *  routines are called.
+ *
+ **********************************************************************/
+static int
+ixgbe_hardware_init(struct adapter *adapter)
+{
+	device_t dev = adapter->dev;
+	uint16_t csum;
+
+	csum = 0;
+	/* Issue a global reset */
+	adapter->hw.adapter_stopped = FALSE;
+	ixgbe_stop_adapter(&adapter->hw);
+
+	/* Make sure we have a good EEPROM before we read from it */
+	if (ixgbe_validate_eeprom_checksum(&adapter->hw, &csum) < 0) {
+		device_printf(dev,"The EEPROM Checksum Is Not Valid\n");
+		return (EIO);
+	}
+
+	/* Get Hardware Flow Control setting */
+	adapter->hw.fc.original_type = ixgbe_flow_control;
+
+	if (ixgbe_init_hw(&adapter->hw)) {
+		device_printf(dev,"Hardware Initialization Failed");
+		return (EIO);
+	}
+
+	return (0);
+}
+
+/*********************************************************************
+ *
+ *  Setup networking device structure and register an interface.
+ *
+ **********************************************************************/
+static void
+ixgbe_setup_interface(device_t dev, struct adapter *adapter)
+{
+	struct ifnet   *ifp;
+	INIT_DEBUGOUT("ixgbe_setup_interface: begin");
+
+	ifp = adapter->ifp = if_alloc(IFT_ETHER);
+	if (ifp == NULL)
+		panic("%s: can not if_alloc()\n", device_get_nameunit(dev));
+	if_initname(ifp, device_get_name(dev), device_get_unit(dev));
+	ifp->if_mtu = ETHERMTU;
+	ifp->if_baudrate = 1000000000;
+	ifp->if_init = ixgbe_init;
+	ifp->if_softc = adapter;
+	ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
+	ifp->if_ioctl = ixgbe_ioctl;
+	ifp->if_start = ixgbe_start;
+	ifp->if_timer = 0;
+	ifp->if_watchdog = NULL;
+	ifp->if_snd.ifq_maxlen = adapter->num_tx_desc - 1;
+
+	ether_ifattach(ifp, adapter->hw.mac.addr);
+
+	/* Override ether_ifattach */
+	ifp->if_mtu = PERFORMANCE_MTU; /* set to 9K by default */
+
+	adapter->max_frame_size =
+	    ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN;
+
+	/*
+	 * Tell the upper layer(s) we support long frames.
+	 */
+	ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header);
+
+	ifp->if_capabilities |= (IFCAP_HWCSUM | IFCAP_TSO4);
+	ifp->if_capabilities |= IFCAP_VLAN_HWTAGGING | IFCAP_VLAN_MTU;
+	ifp->if_capabilities |= IFCAP_JUMBO_MTU;
+
+	ifp->if_capenable = ifp->if_capabilities;
+
+	/*
+	 * Specify the media types supported by this adapter and register
+	 * callbacks to update media and link information
+	 */
+	ifmedia_init(&adapter->media, IFM_IMASK, ixgbe_media_change,
+		     ixgbe_media_status);
+	ifmedia_add(&adapter->media, IFM_ETHER | IFM_10G_SR |
+		    IFM_FDX, 0, NULL);
+	ifmedia_add(&adapter->media, IFM_ETHER | IFM_AUTO, 0, NULL);
+	ifmedia_set(&adapter->media, IFM_ETHER | IFM_AUTO);
+
+	return;
+}
+
+/********************************************************************
+ * Manage DMA'able memory.
+ *******************************************************************/
+static void
+ixgbe_dmamap_cb(void *arg, bus_dma_segment_t * segs, int nseg, int error)
+{
+	if (error)
+		return;
+	*(bus_addr_t *) arg = segs->ds_addr;
+	return;
+}
+
+static int
+ixgbe_dma_malloc(struct adapter *adapter, bus_size_t size,
+		struct ixgbe_dma_alloc *dma, int mapflags)
+{
+	device_t dev = adapter->dev;
+	int             r;
+
+	r = bus_dma_tag_create(NULL,	/* parent */
+			       PAGE_SIZE, 0,	/* alignment, bounds */
+			       BUS_SPACE_MAXADDR,	/* lowaddr */
+			       BUS_SPACE_MAXADDR,	/* highaddr */
+			       NULL, NULL,	/* filter, filterarg */
+			       size,	/* maxsize */
+			       1,	/* nsegments */
+			       size,	/* maxsegsize */
+			       BUS_DMA_ALLOCNOW,	/* flags */
+			       NULL,	/* lockfunc */
+			       NULL,	/* lockfuncarg */
+			       &dma->dma_tag);
+	if (r != 0) {
+		device_printf(dev,"ixgbe_dma_malloc: bus_dma_tag_create failed; "
+		       "error %u\n", r);
+		goto fail_0;
+	}
+	r = bus_dmamem_alloc(dma->dma_tag, (void **)&dma->dma_vaddr,
+			     BUS_DMA_NOWAIT, &dma->dma_map);
+	if (r != 0) {
+		device_printf(dev,"ixgbe_dma_malloc: bus_dmamem_alloc failed; "
+		       "error %u\n", r);
+		goto fail_1;
+	}
+	r = bus_dmamap_load(dma->dma_tag, dma->dma_map, dma->dma_vaddr,
+			    size,
+			    ixgbe_dmamap_cb,
+			    &dma->dma_paddr,
+			    mapflags | BUS_DMA_NOWAIT);
+	if (r != 0) {
+		device_printf(dev,"ixgbe_dma_malloc: bus_dmamap_load failed; "
+		       "error %u\n", r);
+		goto fail_2;
+	}
+	dma->dma_size = size;
+	return (0);
+fail_2:
+	bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map);
+fail_1:
+	bus_dma_tag_destroy(dma->dma_tag);
+fail_0:
+	dma->dma_map = NULL;
+	dma->dma_tag = NULL;
+	return (r);
+}
+
+static void
+ixgbe_dma_free(struct adapter *adapter, struct ixgbe_dma_alloc *dma)
+{
+	bus_dmamap_unload(dma->dma_tag, dma->dma_map);
+	bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map);
+	bus_dma_tag_destroy(dma->dma_tag);
+}
+
+
+/*********************************************************************
+ *
+ *  Allocate memory for the transmit and receive rings, and then
+ *  the descriptors associated with each, called only once at attach.
+ *
+ **********************************************************************/
+static int
+ixgbe_allocate_queues(struct adapter *adapter)
+{
+	device_t dev = adapter->dev;
+	struct tx_ring *txr;
+	struct rx_ring *rxr;
+	int rsize, error = IXGBE_SUCCESS;
+	int txconf = 0, rxconf = 0;
+
+	/* First allocate the TX ring struct memory */
+	if (!(adapter->tx_rings =
+	    (struct tx_ring *) malloc(sizeof(struct tx_ring) *
+	    adapter->num_tx_queues, M_DEVBUF, M_NOWAIT | M_ZERO))) {
+		device_printf(dev, "Unable to allocate TX ring memory\n");
+		error = ENOMEM;
+		goto fail;
+	}
+	txr = adapter->tx_rings;
+
+	/* Next allocate the RX */
+	if (!(adapter->rx_rings =
+	    (struct rx_ring *) malloc(sizeof(struct rx_ring) *
+	    adapter->num_rx_queues, M_DEVBUF, M_NOWAIT | M_ZERO))) {
+		device_printf(dev, "Unable to allocate RX ring memory\n");
+		error = ENOMEM;
+		goto rx_fail;
+	}
+	rxr = adapter->rx_rings;
+
+	/* Only do this once, RX and TX desc are the same size */
+	rsize = roundup2(adapter->num_tx_desc *
+	    sizeof(union ixgbe_adv_tx_desc), 4096);
+	/*
+	 * Now set up the TX queues, txconf is needed to handle the
+	 * possibility that things fail midcourse and we need to
+	 * undo memory gracefully
+	 */ 
+	for (int i = 0; i < adapter->num_tx_queues; i++, txconf++) {
+		/* Set up some basics */
+		txr = &adapter->tx_rings[i];
+		txr->adapter = adapter;
+		txr->me = i;
+
+		if (ixgbe_dma_malloc(adapter, rsize,
+			&txr->txdma, BUS_DMA_NOWAIT)) {
+			device_printf(dev,
+			    "Unable to allocate TX Descriptor memory\n");
+			error = ENOMEM;
+			goto err_tx_desc;
+		}
+		txr->tx_base = (union ixgbe_adv_tx_desc *)txr->txdma.dma_vaddr;
+		bzero((void *)txr->tx_base, rsize);
+
+        	/* Now allocate transmit buffers for the ring */
+        	if (ixgbe_allocate_transmit_buffers(txr)) {
+			device_printf(dev,
+			    "Critical Failure setting up transmit buffers\n");
+			error = ENOMEM;
+			goto err_tx_desc;
+        	}
+
+	}
+
+	/*
+	 * Next the RX queues...
+	 */ 
+	for (int i = 0; i < adapter->num_rx_queues; i++, rxconf++) {
+		rxr = &adapter->rx_rings[i];
+		/* Set up some basics */
+		rxr->adapter = adapter;
+		rxr->me = i;
+
+		if (ixgbe_dma_malloc(adapter, rsize,
+			&rxr->rxdma, BUS_DMA_NOWAIT)) {
+			device_printf(dev,
+			    "Unable to allocate RxDescriptor memory\n");
+			error = ENOMEM;
+			goto err_rx_desc;
+		}
+		rxr->rx_base = (union ixgbe_adv_rx_desc *)rxr->rxdma.dma_vaddr;
+		bzero((void *)rxr->rx_base, rsize);
+
+        	/* Allocate receive buffers for the ring*/
+		if (ixgbe_allocate_receive_buffers(rxr)) {
+			device_printf(dev,
+			    "Critical Failure setting up receive buffers\n");
+			error = ENOMEM;
+			goto err_rx_desc;
+		}
+	}
+
+	return (0);
+
+err_rx_desc:
+	for (rxr = adapter->rx_rings; rxconf > 0; rxr++, rxconf--)
+		ixgbe_dma_free(adapter, &rxr->rxdma);
+err_tx_desc:
+	for (txr = adapter->tx_rings; txconf > 0; txr++, txconf--)
+		ixgbe_dma_free(adapter, &txr->txdma);
+	free(adapter->rx_rings, M_DEVBUF);
+rx_fail:
+	free(adapter->tx_rings, M_DEVBUF);
+fail:
+	return (error);
+}
+
+/*********************************************************************
+ *
+ *  Allocate memory for tx_buffer structures. The tx_buffer stores all
+ *  the information needed to transmit a packet on the wire. This is
+ *  called only once at attach, setup is done every reset.
+ *
+ **********************************************************************/
+static int
+ixgbe_allocate_transmit_buffers(struct tx_ring *txr)
+{
+	struct adapter *adapter = txr->adapter;
+	device_t dev = adapter->dev;
+	struct ixgbe_tx_buf *txbuf;
+	int error, i;
+
+	/*
+	 * Setup DMA descriptor areas.
+	 */
+	if ((error = bus_dma_tag_create(NULL,		/* parent */
+			       PAGE_SIZE, 0,		/* alignment, bounds */
+			       BUS_SPACE_MAXADDR,	/* lowaddr */
+			       BUS_SPACE_MAXADDR,	/* highaddr */
+			       NULL, NULL,		/* filter, filterarg */
+			       IXGBE_TSO_SIZE,		/* maxsize */
+			       IXGBE_MAX_SCATTER,	/* nsegments */
+			       PAGE_SIZE,		/* maxsegsize */
+			       0,			/* flags */
+			       NULL,			/* lockfunc */
+			       NULL,			/* lockfuncarg */
+			       &txr->txtag))) {
+		device_printf(dev,"Unable to allocate TX DMA tag\n");
+		goto fail;
+	}
+
+	if (!(txr->tx_buffers =
+	    (struct ixgbe_tx_buf *) malloc(sizeof(struct ixgbe_tx_buf) *
+	    adapter->num_tx_desc, M_DEVBUF, M_NOWAIT | M_ZERO))) {
+		device_printf(dev, "Unable to allocate tx_buffer memory\n");
+		error = ENOMEM;
+		goto fail;
+	}
+
+        /* Create the descriptor buffer dma maps */
+	txbuf = txr->tx_buffers;
+	for (i = 0; i < adapter->num_tx_desc; i++, txbuf++) {
+		error = bus_dmamap_create(txr->txtag, 0, &txbuf->map);
+		if (error != 0) {
+			device_printf(dev, "Unable to create TX DMA map\n");
+			goto fail;
+		}
+	}
+
+	return 0;
+fail:
+	/* We free all, it handles case where we are in the middle */
+	ixgbe_free_transmit_structures(adapter);
+	return (error);
+}
+
+/*********************************************************************
+ *
+ *  Initialize a transmit ring.
+ *
+ **********************************************************************/
+static void
+ixgbe_setup_transmit_ring(struct tx_ring *txr)
+{
+	struct adapter *adapter = txr->adapter;
+	struct ixgbe_tx_buf *txbuf;
+	int i;
+
+	/* Clear the old ring contents */
+	bzero((void *)txr->tx_base,
+	      (sizeof(union ixgbe_adv_tx_desc)) * adapter->num_tx_desc);
+	/* Reset indices */
+	txr->next_avail_tx_desc = 0;
+	txr->next_tx_to_clean = 0;
+
+	/* Free any existing tx buffers. */
+        txbuf = txr->tx_buffers;
+	for (i = 0; i < adapter->num_tx_desc; i++, txbuf++) {
+		if (txbuf->m_head != NULL) {
+			bus_dmamap_sync(txr->txtag, txbuf->map,
+			    BUS_DMASYNC_POSTWRITE);
+			bus_dmamap_unload(txr->txtag, txbuf->map);
+			m_freem(txbuf->m_head);
+			txbuf->m_head = NULL;
+		}
+		/* clear the watch index */
+		txbuf->next_eop = -1;
+        }
+
+	/* Set number of descriptors available */
+	txr->tx_avail = adapter->num_tx_desc;
+
+	bus_dmamap_sync(txr->txdma.dma_tag, txr->txdma.dma_map,
+	    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
+
+}
+
+/*********************************************************************
+ *
+ *  Initialize all transmit rings.
+ *
+ **********************************************************************/
+static int
+ixgbe_setup_transmit_structures(struct adapter *adapter)
+{
+	struct tx_ring *txr = adapter->tx_rings;
+
+	for (int i = 0; i < adapter->num_tx_queues; i++, txr++)
+		ixgbe_setup_transmit_ring(txr);
+
+	return (0);
+}
+
+/*********************************************************************
+ *
+ *  Enable transmit unit.
+ *	NOTE: this will need to be changed if there are more than
+ *	one transmit queues.
+ **********************************************************************/
+static void
+ixgbe_initialize_transmit_units(struct adapter *adapter)
+{
+	struct tx_ring *txr = adapter->tx_rings;
+	uint64_t       tdba = txr->txdma.dma_paddr;
+
+	/* Setup the Base and Length of the Tx Descriptor Ring */
+
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_TDBAL(0),
+		       (tdba & 0x00000000ffffffffULL));
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_TDBAH(0), (tdba >> 32));
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_TDLEN(0),
+		       adapter->num_tx_desc *
+		       sizeof(struct ixgbe_legacy_tx_desc));
+
+	/* Setup the HW Tx Head and Tail descriptor pointers */
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_TDH(0), 0);
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_TDT(0), 0);
+
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_TIPG, IXGBE_TIPG_FIBER_DEFAULT);
+
+	/* Setup Transmit Descriptor Cmd Settings */
+	txr->txd_cmd = IXGBE_TXD_CMD_IFCS;
+
+	return;
+}
+
+/*********************************************************************
+ *
+ *  Free all transmit rings.
+ *
+ **********************************************************************/
+static void
+ixgbe_free_transmit_structures(struct adapter *adapter)
+{
+	struct tx_ring *txr = adapter->tx_rings;
+	for (int i = 0; i < adapter->num_tx_queues; i++, txr++) {
+		ixgbe_free_transmit_buffers(txr);
+		ixgbe_dma_free(adapter, &txr->txdma);
+	}
+
+	free(adapter->tx_rings, M_DEVBUF);
+}
+
+/*********************************************************************
+ *
+ *  Free transmit ring related data structures.
+ *
+ **********************************************************************/
+static void
+ixgbe_free_transmit_buffers(struct tx_ring *txr)
+{
+	struct adapter *adapter = txr->adapter;
+	struct ixgbe_tx_buf *tx_buffer;
+	int             i;
+
+	INIT_DEBUGOUT("free_transmit_ring: begin");
+
+	if (txr->tx_buffers == NULL)
+		return;
+
+	tx_buffer = txr->tx_buffers;
+	for (i = 0; i < adapter->num_tx_desc; i++, tx_buffer++) {
+		if (tx_buffer->m_head != NULL) {
+			bus_dmamap_sync(txr->txtag, tx_buffer->map,
+			    BUS_DMASYNC_POSTWRITE);
+			bus_dmamap_unload(txr->txtag,
+			    tx_buffer->map);
+			m_freem(tx_buffer->m_head);
+			tx_buffer->m_head = NULL;
+			if (tx_buffer->map != NULL) {
+				bus_dmamap_destroy(txr->txtag,
+				    tx_buffer->map);
+				tx_buffer->map = NULL;
+			}
+		} else if (tx_buffer->map != NULL) {
+			bus_dmamap_unload(txr->txtag,
+			    tx_buffer->map);
+			bus_dmamap_destroy(txr->txtag,
+			    tx_buffer->map);
+			tx_buffer->map = NULL;
+		}
+	}
+
+	if (txr->tx_buffers != NULL) {
+		free(txr->tx_buffers, M_DEVBUF);
+		txr->tx_buffers = NULL;
+	}
+	if (txr->txtag != NULL) {
+		bus_dma_tag_destroy(txr->txtag);
+		txr->txtag = NULL;
+	}
+	return;
+}
+
+/*********************************************************************
+ *
+ *  Advanced Context Descriptor setup for VLAN or CSUM
+ *
+ **********************************************************************/
+
+static boolean_t
+ixgbe_tx_csum_setup(struct tx_ring *txr, struct mbuf *mp)
+{
+	struct adapter *adapter = txr->adapter;
+	struct ixgbe_adv_tx_context_desc *TXD;
+	struct ixgbe_tx_buf        *tx_buffer;
+	uint32_t vlan_macip_lens = 0, type_tucmd_mlhl = 0;
+	struct ether_vlan_header *eh;
+	struct ip *ip;
+	struct ip6_hdr *ip6;
+	int  ehdrlen, ip_hlen;
+	u16	etype;
+	u8	ipproto;
+	int ctxd = txr->next_avail_tx_desc;
+	u16 vtag = 0;
+
+	tx_buffer = &txr->tx_buffers[ctxd];
+	TXD = (struct ixgbe_adv_tx_context_desc *) &txr->tx_base[ctxd];
+
+	/*
+	** In advanced descriptors the vlan tag must 
+	** be placed into the descriptor itself.
+	*/
+	if (mp->m_flags & M_VLANTAG) {
+		vtag = htole16(mp->m_pkthdr.ether_vtag);
+		vlan_macip_lens |= (vtag << IXGBE_ADVTXD_VLAN_SHIFT);
+	}
+
+	/*
+	 * Determine where frame payload starts.
+	 * Jump over vlan headers if already present,
+	 * helpful for QinQ too.
+	 */
+	eh = mtod(mp, struct ether_vlan_header *);
+	if (eh->evl_encap_proto == htons(ETHERTYPE_VLAN)) {
+		etype = ntohs(eh->evl_proto);
+		ehdrlen = ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN;
+	} else {
+		etype = ntohs(eh->evl_encap_proto);
+		ehdrlen = ETHER_HDR_LEN;
+	}
+
+	/* Set the ether header length */
+	vlan_macip_lens |= ehdrlen << IXGBE_ADVTXD_MACLEN_SHIFT;
+
+	switch (etype) {
+		case ETHERTYPE_IP:
+			ip = (struct ip *)(mp->m_data + ehdrlen);
+			ip_hlen = ip->ip_hl << 2;
+			if (mp->m_len < ehdrlen + ip_hlen)
+				return FALSE; /* failure */
+			ipproto = ip->ip_p;
+			type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV4;
+			break;
+		case ETHERTYPE_IPV6:
+			ip6 = (struct ip6_hdr *)(mp->m_data + ehdrlen);
+			ip_hlen = sizeof(struct ip6_hdr);
+			if (mp->m_len < ehdrlen + ip_hlen)
+				return FALSE; /* failure */
+			ipproto = ip6->ip6_nxt;
+			type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV6;
+			break;
+		default:
+			return FALSE;
+	}
+
+	vlan_macip_lens |= ip_hlen;
+	type_tucmd_mlhl |= IXGBE_ADVTXD_DCMD_DEXT | IXGBE_ADVTXD_DTYP_CTXT;
+
+	switch (ipproto) {
+		case IPPROTO_TCP:
+			if (mp->m_pkthdr.csum_flags & CSUM_TCP)
+				type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_L4T_TCP;
+			break;
+		case IPPROTO_UDP:
+			if (mp->m_pkthdr.csum_flags & CSUM_UDP)
+				type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_L4T_UDP;
+			break;
+	}
+
+	/* Now copy bits into descriptor */
+	TXD->vlan_macip_lens |= htole32(vlan_macip_lens);
+	TXD->type_tucmd_mlhl |= htole32(type_tucmd_mlhl);
+	TXD->seqnum_seed = htole32(0);
+	TXD->mss_l4len_idx = htole32(0);
+
+	tx_buffer->m_head = NULL;
+	tx_buffer->next_eop = -1;
+
+	/* We've consumed the first desc, adjust counters */
+	if (++ctxd == adapter->num_tx_desc)
+		ctxd = 0;
+	txr->next_avail_tx_desc = ctxd;
+	--txr->tx_avail;
+
+        return TRUE;
+}
+
+/**********************************************************************
+ *
+ *  Setup work for hardware segmentation offload (TSO) on
+ *  adapters using advanced tx descriptors
+ *
+ **********************************************************************/
+static boolean_t
+ixgbe_tso_setup(struct tx_ring *txr, struct mbuf *mp, u32 *paylen)
+{
+	struct adapter *adapter = txr->adapter;
+	struct ixgbe_adv_tx_context_desc *TXD;
+	struct ixgbe_tx_buf        *tx_buffer;
+	u32 vlan_macip_lens = 0, type_tucmd_mlhl = 0;
+	u32 mss_l4len_idx = 0;
+	u16 vtag = 0;
+	int ctxd, ehdrlen,  hdrlen, ip_hlen, tcp_hlen;
+	struct ether_vlan_header *eh;
+	struct ip *ip;
+	struct tcphdr *th;
+
+	if (((mp->m_pkthdr.csum_flags & CSUM_TSO) == 0) ||
+	    (mp->m_pkthdr.len <= IXGBE_TX_BUFFER_SIZE))
+	        return FALSE;
+
+	/*
+	 * Determine where frame payload starts.
+	 * Jump over vlan headers if already present
+	 */
+	eh = mtod(mp, struct ether_vlan_header *);
+	if (eh->evl_encap_proto == htons(ETHERTYPE_VLAN)) 
+		ehdrlen = ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN;
+	else
+		ehdrlen = ETHER_HDR_LEN;
+
+        /* Ensure we have at least the IP+TCP header in the first mbuf. */
+        if (mp->m_len < ehdrlen + sizeof(struct ip) + sizeof(struct tcphdr))
+		return FALSE;
+
+	ctxd = txr->next_avail_tx_desc;
+	tx_buffer = &txr->tx_buffers[ctxd];
+	TXD = (struct ixgbe_adv_tx_context_desc *) &txr->tx_base[ctxd];
+
+	ip = (struct ip *)(mp->m_data + ehdrlen);
+	if (ip->ip_p != IPPROTO_TCP)
+		return FALSE;   /* 0 */
+	ip->ip_len = 0;
+	ip->ip_sum = 0;
+	ip_hlen = ip->ip_hl << 2;
+	th = (struct tcphdr *)((caddr_t)ip + ip_hlen);
+	th->th_sum = in_pseudo(ip->ip_src.s_addr,
+	    ip->ip_dst.s_addr, htons(IPPROTO_TCP));
+	tcp_hlen = th->th_off << 2;
+	hdrlen = ehdrlen + ip_hlen + tcp_hlen;
+	/* This is used in the transmit desc in encap */
+	*paylen = mp->m_pkthdr.len - hdrlen;
+
+	/* VLAN MACLEN IPLEN */
+	if (mp->m_flags & M_VLANTAG) {
+		vtag = htole16(mp->m_pkthdr.ether_vtag);
+                vlan_macip_lens |= (vtag << IXGBE_ADVTXD_VLAN_SHIFT);
+	}
+
+	vlan_macip_lens |= ehdrlen << IXGBE_ADVTXD_MACLEN_SHIFT;
+	vlan_macip_lens |= ip_hlen;
+	TXD->vlan_macip_lens |= htole32(vlan_macip_lens);
+
+	/* ADV DTYPE TUCMD */
+	type_tucmd_mlhl |= IXGBE_ADVTXD_DCMD_DEXT | IXGBE_ADVTXD_DTYP_CTXT;
+	type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_L4T_TCP;
+	type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV4;
+	TXD->type_tucmd_mlhl |= htole32(type_tucmd_mlhl);
+
+
+	/* MSS L4LEN IDX */
+	mss_l4len_idx |= (mp->m_pkthdr.tso_segsz << IXGBE_ADVTXD_MSS_SHIFT);
+	mss_l4len_idx |= (tcp_hlen << IXGBE_ADVTXD_L4LEN_SHIFT);
+	TXD->mss_l4len_idx = htole32(mss_l4len_idx);
+
+	TXD->seqnum_seed = htole32(0);
+	tx_buffer->m_head = NULL;
+	tx_buffer->next_eop = -1;
+
+	if (++ctxd == adapter->num_tx_desc)
+		ctxd = 0;
+
+	txr->tx_avail--;
+	txr->next_avail_tx_desc = ctxd;
+	return TRUE;
+}
+
+
+/**********************************************************************
+ *
+ *  Examine each tx_buffer in the used queue. If the hardware is done
+ *  processing the packet then free associated resources. The
+ *  tx_buffer is put back on the free queue.
+ *
+ **********************************************************************/
+static boolean_t
+ixgbe_txeof(struct tx_ring *txr)
+{
+	struct adapter * adapter = txr->adapter;
+	struct ifnet	*ifp = adapter->ifp;
+	int	first, last, done, num_avail;
+	struct ixgbe_tx_buf *tx_buffer;
+	struct ixgbe_legacy_tx_desc *tx_desc, *eop_desc;
+
+	IXGBE_LOCK_ASSERT(adapter);
+
+	if (txr->tx_avail == adapter->num_tx_desc)
+		return FALSE;
+
+	num_avail = txr->tx_avail;
+	first = txr->next_tx_to_clean;
+
+	tx_buffer = &txr->tx_buffers[first];
+	/* For cleanup we just use legacy struct */
+	tx_desc = (struct ixgbe_legacy_tx_desc *)&txr->tx_base[first];
+	last = tx_buffer->next_eop;
+        if (last == -1)
+		return FALSE;
+
+	eop_desc = (struct ixgbe_legacy_tx_desc *)&txr->tx_base[last];
+
+        /*
+         * What this does is get the index of the
+         * first descriptor AFTER the EOP of the
+         * first packet, that way we can do the
+         * simple comparison on the inner while loop
+	 * below.
+         */
+        if (++last == adapter->num_tx_desc) last = 0;
+        done = last;
+
+        bus_dmamap_sync(txr->txdma.dma_tag, txr->txdma.dma_map,
+            BUS_DMASYNC_POSTREAD);
+
+	while (eop_desc->upper.fields.status & IXGBE_TXD_STAT_DD) {
+		/* We clean the range of the packet */
+		while (first != done) {
+			tx_desc->upper.data = 0;
+			tx_desc->lower.data = 0;
+			tx_desc->buffer_addr = 0;
+			num_avail++;
+
+			if (tx_buffer->m_head) {
+				ifp->if_opackets++;
+				bus_dmamap_sync(txr->txtag,
+				    tx_buffer->map,
+				    BUS_DMASYNC_POSTWRITE);
+				bus_dmamap_unload(txr->txtag,
+				    tx_buffer->map);
+				m_freem(tx_buffer->m_head);
+				tx_buffer->m_head = NULL;
+				tx_buffer->map = NULL;
+			}
+			tx_buffer->next_eop = -1;
+
+			if (++first == adapter->num_tx_desc)
+				first = 0;
+
+			tx_buffer = &txr->tx_buffers[first];
+			tx_desc =
+			    (struct ixgbe_legacy_tx_desc *)&txr->tx_base[first];
+		}
+		/* See if we can continue to the next packet */
+		last = tx_buffer->next_eop;
+		if (last != -1) {
+			eop_desc =
+			    (struct ixgbe_legacy_tx_desc *)&txr->tx_base[last];
+			/* Get new done point */
+			if (++last == adapter->num_tx_desc) last = 0;
+			done = last;
+		} else
+			break;
+
+	}
+	bus_dmamap_sync(txr->txdma.dma_tag, txr->txdma.dma_map,
+	    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
+
+	txr->next_tx_to_clean = first;
+
+	/*
+	 * If we have enough room, clear IFF_DRV_OACTIVE to tell the stack that
+	 * it is OK to send packets. If there are no pending descriptors,
+	 * clear the timeout. Otherwise, if some descriptors have been freed,
+	 * restart the timeout.
+	 */
+	if (num_avail > IXGBE_TX_CLEANUP_THRESHOLD) {
+		ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
+		/* If all are clean turn off the timer */
+		if (num_avail == adapter->num_tx_desc)
+			adapter->watchdog_timer = 0;
+		/* Some were cleaned, so reset timer */
+		else if (num_avail == txr->tx_avail)
+			adapter->watchdog_timer = IXGBE_TX_TIMEOUT;
+	}
+
+	txr->tx_avail = num_avail;
+	return TRUE;
+}
+
+/*********************************************************************
+ *
+ *  Get a buffer from system mbuf buffer pool.
+ *
+ **********************************************************************/
+static int
+ixgbe_get_buf(struct rx_ring *rxr, int i)
+{
+	struct adapter	*adapter = rxr->adapter;
+	struct mbuf	*mp;
+	bus_dmamap_t	map;
+	int		nsegs, error, old, s = 0;
+	int		size = MCLBYTES;
+
+
+	bus_dma_segment_t	segs[1];
+	struct ixgbe_rx_buf	*rxbuf;
+
+	/* Are we going to Jumbo clusters? */
+	if (adapter->bigbufs) {
+		size = MJUMPAGESIZE;
+		s = 1;
+	};
+	
+	mp = m_getjcl(M_DONTWAIT, MT_DATA, M_PKTHDR, size);
+	if (mp == NULL) {
+		adapter->mbuf_alloc_failed++;
+		return (ENOBUFS);
+	}
+
+	mp->m_len = mp->m_pkthdr.len = size;
+
+	if (adapter->max_frame_size <= (MCLBYTES - ETHER_ALIGN))
+		m_adj(mp, ETHER_ALIGN);
+
+	/*
+	 * Using memory from the mbuf cluster pool, invoke the bus_dma
+	 * machinery to arrange the memory mapping.
+	 */
+	error = bus_dmamap_load_mbuf_sg(rxr->rxtag[s], rxr->spare_map[s],
+	    mp, segs, &nsegs, BUS_DMA_NOWAIT);
+	if (error) {
+		m_free(mp);
+		return (error);
+	}
+
+	/* Now check our target buffer for existing mapping */
+	rxbuf = &rxr->rx_buffers[i];
+	old = rxbuf->bigbuf;
+	if (rxbuf->m_head != NULL)
+		bus_dmamap_unload(rxr->rxtag[old], rxbuf->map[old]);
+
+        map = rxbuf->map[old];
+        rxbuf->map[s] = rxr->spare_map[s];
+        rxr->spare_map[old] = map;
+        bus_dmamap_sync(rxr->rxtag[s], rxbuf->map[s], BUS_DMASYNC_PREREAD);
+        rxbuf->m_head = mp;
+
+        rxr->rx_base[i].read.pkt_addr = htole64(segs[0].ds_addr);
+
+        return (0);
+}
+
+/*********************************************************************
+ *
+ *  Allocate memory for rx_buffer structures. Since we use one
+ *  rx_buffer per received packet, the maximum number of rx_buffer's
+ *  that we'll need is equal to the number of receive descriptors
+ *  that we've allocated.
+ *
+ **********************************************************************/
+static int
+ixgbe_allocate_receive_buffers(struct rx_ring *rxr)
+{
+	struct	adapter 	*adapter = rxr->adapter;
+	device_t 		dev = adapter->dev;
+	struct ixgbe_rx_buf 	*rxbuf;
+	int             	i, bsize, error;
+
+	bsize = sizeof(struct ixgbe_rx_buf) * adapter->num_rx_desc;
+	if (!(rxr->rx_buffers =
+	    (struct ixgbe_rx_buf *) malloc(bsize,
+	    M_DEVBUF, M_NOWAIT | M_ZERO))) {
+		device_printf(dev, "Unable to allocate rx_buffer memory\n");
+		error = ENOMEM;
+		goto fail;
+	}
+
+	/* First make the small (2K) tag/map */
+	if ((error = bus_dma_tag_create(NULL,		/* parent */
+				   PAGE_SIZE, 0,	/* alignment, bounds */
+				   BUS_SPACE_MAXADDR,	/* lowaddr */
+				   BUS_SPACE_MAXADDR,	/* highaddr */
+				   NULL, NULL,		/* filter, filterarg */
+				   MCLBYTES,		/* maxsize */
+				   1,			/* nsegments */
+				   MCLBYTES,		/* maxsegsize */
+				   0,			/* flags */
+				   NULL,		/* lockfunc */
+				   NULL,		/* lockfuncarg */
+				   &rxr->rxtag[0]))) {
+		device_printf(dev, "Unable to create RX Small DMA tag\n");
+		goto fail;
+	}
+
+	/* Next make the large (4K) tag/map */
+	if ((error = bus_dma_tag_create(NULL,		/* parent */
+				   PAGE_SIZE, 0,	/* alignment, bounds */
+				   BUS_SPACE_MAXADDR,	/* lowaddr */
+				   BUS_SPACE_MAXADDR,	/* highaddr */
+				   NULL, NULL,		/* filter, filterarg */
+				   MJUMPAGESIZE,	/* maxsize */
+				   1,			/* nsegments */
+				   MJUMPAGESIZE,	/* maxsegsize */
+				   0,			/* flags */
+				   NULL,		/* lockfunc */
+				   NULL,		/* lockfuncarg */
+				   &rxr->rxtag[1]))) {
+		device_printf(dev, "Unable to create RX Large DMA tag\n");
+		goto fail;
+	}
+
+	/* Create the spare maps (used by getbuf) */
+        error = bus_dmamap_create(rxr->rxtag[0], BUS_DMA_NOWAIT,
+	     &rxr->spare_map[0]);
+        error = bus_dmamap_create(rxr->rxtag[1], BUS_DMA_NOWAIT,
+	     &rxr->spare_map[1]);
+	if (error) {
+		device_printf(dev, "%s: bus_dmamap_create failed: %d\n",
+		    __func__, error);
+		goto fail;
+	}
+
+	for (i = 0; i < adapter->num_rx_desc; i++, rxbuf++) {
+		rxbuf = &rxr->rx_buffers[i];
+		error = bus_dmamap_create(rxr->rxtag[0],
+		    BUS_DMA_NOWAIT, &rxbuf->map[0]);
+		if (error) {
+			device_printf(dev, "Unable to create Small RX DMA map\n");
+			goto fail;
+		}
+		error = bus_dmamap_create(rxr->rxtag[1],
+		    BUS_DMA_NOWAIT, &rxbuf->map[1]);
+		if (error) {
+			device_printf(dev, "Unable to create Large RX DMA map\n");
+			goto fail;
+		}
+	}
+
+	return (0);
+
+fail:
+	/* Frees all, but can handle partial completion */
+	ixgbe_free_receive_structures(adapter);
+	return (error);
+}
+
+/*********************************************************************
+ *
+ *  Initialize a receive ring and its buffers.
+ *
+ **********************************************************************/
+static int
+ixgbe_setup_receive_ring(struct rx_ring *rxr)
+{
+	struct	adapter 	*adapter;
+	struct ixgbe_rx_buf *rxbuf;
+	int j, rsize, s;
+
+	adapter = rxr->adapter;
+	rsize = roundup2(adapter->num_rx_desc *
+	    sizeof(union ixgbe_adv_rx_desc), 4096);
+	/* Clear the ring contents */
+	bzero((void *)rxr->rx_base, rsize);
+
+	/*
+	** Free current RX buffers: the size buffer
+	** that is loaded is indicated by the buffer
+	** bigbuf value.
+	*/
+	for (int i = 0; i < adapter->num_rx_desc; i++) {
+		rxbuf = &rxr->rx_buffers[i];
+		s = rxbuf->bigbuf;
+		if (rxbuf->m_head != NULL) {
+			bus_dmamap_sync(rxr->rxtag[s], rxbuf->map[s],
+			    BUS_DMASYNC_POSTREAD);
+			bus_dmamap_unload(rxr->rxtag[s], rxbuf->map[s]);
+			m_freem(rxbuf->m_head);
+			rxbuf->m_head = NULL;
+		}
+	}
+
+	for (j = 0; j < adapter->num_rx_desc; j++) {
+		if (ixgbe_get_buf(rxr, j) == ENOBUFS) {
+			rxr->rx_buffers[j].m_head = NULL;
+			rxr->rx_base[j].read.pkt_addr = 0;
+			/* If we fail some may have change size */
+			s = adapter->bigbufs;
+			goto fail;
+		}
+	}
+
+	/* Setup our descriptor indices */
+	rxr->next_to_check = 0;
+	rxr->last_cleaned = 0;
+
+	bus_dmamap_sync(rxr->rxdma.dma_tag, rxr->rxdma.dma_map,
+	    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
+
+	return (0);
+fail:
+	/*
+	 * We need to clean up any buffers allocated so far
+	 * 'j' is the failing index, decrement it to get the
+	 * last success.
+	 */
+	for (--j; j > 0; j--) {
+		rxbuf = &rxr->rx_buffers[j];
+		if (rxbuf->m_head != NULL) {
+			bus_dmamap_sync(rxr->rxtag[s], rxbuf->map[s],
+			    BUS_DMASYNC_POSTREAD);
+			bus_dmamap_unload(rxr->rxtag[s], rxbuf->map[s]);
+			m_freem(rxbuf->m_head);
+			rxbuf->m_head = NULL;
+		}
+	}
+	return (ENOBUFS);
+}
+
+/*********************************************************************
+ *
+ *  Initialize all receive rings.
+ *
+ **********************************************************************/
+static int
+ixgbe_setup_receive_structures(struct adapter *adapter)
+{
+	struct rx_ring *rxr = adapter->rx_rings;
+	int i, j, s;
+
+	for (i = 0; i < adapter->num_rx_queues; i++, rxr++)
+		if (ixgbe_setup_receive_ring(rxr))
+			goto fail;
+
+	return (0);
+fail:
+	/*
+	 * Free RX buffers allocated so far, we will only handle
+	 * the rings that completed, the failing case will have
+	 * cleaned up for itself. The value of 'i' will be the
+	 * failed ring so we must pre-decrement it.
+	 */
+	rxr = adapter->rx_rings;
+	for (--i; i > 0; i--, rxr++) {
+		for (j = 0; j < adapter->num_rx_desc; j++) {
+			struct ixgbe_rx_buf *rxbuf;
+			rxbuf = &rxr->rx_buffers[j];
+			s = rxbuf->bigbuf;
+			if (rxbuf->m_head != NULL) {
+				bus_dmamap_sync(rxr->rxtag[s], rxbuf->map[s],
+			  	  BUS_DMASYNC_POSTREAD);
+				bus_dmamap_unload(rxr->rxtag[s], rxbuf->map[s]);
+				m_freem(rxbuf->m_head);
+				rxbuf->m_head = NULL;
+			}
+		}
+	}
+
+	return (ENOBUFS);
+}
+
+/*********************************************************************
+ *
+ *  Enable receive unit.
+ *
+ **********************************************************************/
+static void
+ixgbe_initialize_receive_units(struct adapter *adapter)
+{
+	struct	rx_ring	*rxr = adapter->rx_rings;
+	struct ifnet   *ifp = adapter->ifp;
+	u32		rxctrl, fctrl, srrctl, rxcsum;
+	u32		reta, mrqc, hlreg, linkvec;
+	u32		random[10];
+
+
+	/*
+	 * Make sure receives are disabled while
+	 * setting up the descriptor ring
+	 */
+	rxctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_RXCTRL);
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXCTRL,
+	    rxctrl & ~IXGBE_RXCTRL_RXEN);
+
+	/* Enable broadcasts */
+	fctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_FCTRL);
+	fctrl |= IXGBE_FCTRL_BAM;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, fctrl);
+
+	hlreg = IXGBE_READ_REG(&adapter->hw, IXGBE_HLREG0);
+	if (ifp->if_mtu > ETHERMTU)
+		hlreg |= IXGBE_HLREG0_JUMBOEN;
+	else
+		hlreg &= ~IXGBE_HLREG0_JUMBOEN;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_HLREG0, hlreg);
+
+	srrctl = IXGBE_READ_REG(&adapter->hw, IXGBE_SRRCTL(0));
+	srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK;
+	srrctl &= ~IXGBE_SRRCTL_BSIZEPKT_MASK;
+	if (adapter->bigbufs)
+		srrctl |= 4096 >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
+	else
+		srrctl |= 2048 >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
+	srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_SRRCTL(0), srrctl);
+
+	/* Set Queue moderation rate */
+	for (int i = 0; i < IXGBE_MSGS; i++)
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(i), DEFAULT_ITR);
+
+	/* Set Link moderation lower */
+	linkvec = adapter->num_tx_queues + adapter->num_rx_queues;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(linkvec), LINK_ITR);
+
+	for (int i = 0; i < adapter->num_rx_queues; i++, rxr++) {
+		u64 rdba = rxr->rxdma.dma_paddr;
+		/* Setup the Base and Length of the Rx Descriptor Ring */
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_RDBAL(i),
+			       (rdba & 0x00000000ffffffffULL));
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_RDBAH(i), (rdba >> 32));
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_RDLEN(i),
+		    adapter->num_rx_desc * sizeof(union ixgbe_adv_rx_desc));
+
+		/* Setup the HW Rx Head and Tail Descriptor Pointers */
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_RDH(i), 0);
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_RDT(i),
+		    adapter->num_rx_desc - 1);
+	}
+
+	if (adapter->num_rx_queues > 1) {
+		/* set up random bits */
+		arc4rand(&random, sizeof(random), 0);
+		switch (adapter->num_rx_queues) {
+			case 8:
+			case 4:
+				reta = 0x00010203;
+				break;
+			case 2:
+				reta = 0x00010001;
+				break;
+			default:
+				reta = 0x00000000;
+		}
+
+		/* Set up the redirection table */
+		for (int i = 0; i < 32; i++) {
+			IXGBE_WRITE_REG(&adapter->hw, IXGBE_RETA(i), reta);
+			if (adapter->num_rx_queues > 4) {
+				++i;
+				IXGBE_WRITE_REG(&adapter->hw,
+				    IXGBE_RETA(i), 0x04050607);
+			}
+		}
+
+		/* Now fill our hash function seeds */
+		for (int i = 0; i < 10; i++)
+			IXGBE_WRITE_REG_ARRAY(&adapter->hw,
+			    IXGBE_RSSRK(0), i, random[i]);
+
+		mrqc = IXGBE_MRQC_RSSEN
+		    /* Perform hash on these packet types */
+		    | IXGBE_MRQC_RSS_FIELD_IPV4
+		    | IXGBE_MRQC_RSS_FIELD_IPV4_TCP
+		    | IXGBE_MRQC_RSS_FIELD_IPV4_UDP
+		    | IXGBE_MRQC_RSS_FIELD_IPV6_EX_TCP
+		    | IXGBE_MRQC_RSS_FIELD_IPV6_EX
+		    | IXGBE_MRQC_RSS_FIELD_IPV6
+		    | IXGBE_MRQC_RSS_FIELD_IPV6_TCP
+		    | IXGBE_MRQC_RSS_FIELD_IPV6_UDP
+		    | IXGBE_MRQC_RSS_FIELD_IPV6_EX_UDP;
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_MRQC, mrqc);
+
+		/* RSS and RX IPP Checksum are mutually exclusive */
+		rxcsum = IXGBE_READ_REG(&adapter->hw, IXGBE_RXCSUM);
+		rxcsum |= IXGBE_RXCSUM_PCSD;
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXCSUM, rxcsum);
+	} else {
+		rxcsum = IXGBE_READ_REG(&adapter->hw, IXGBE_RXCSUM);
+		if (ifp->if_capenable & IFCAP_RXCSUM)
+			rxcsum |= IXGBE_RXCSUM_IPPCSE;
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXCSUM, rxcsum);
+	}
+
+	/* Enable Receive engine */
+	rxctrl |= (IXGBE_RXCTRL_RXEN | IXGBE_RXCTRL_DMBYPS);
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXCTRL, rxctrl);
+
+	return;
+}
+
+/*********************************************************************
+ *
+ *  Free all receive rings.
+ *
+ **********************************************************************/
+static void
+ixgbe_free_receive_structures(struct adapter *adapter)
+{
+	struct rx_ring *rxr = adapter->rx_rings;
+
+	for (int i = 0; i < adapter->num_rx_queues; i++, rxr++) {
+		ixgbe_free_receive_buffers(rxr);
+		/* Free the ring memory as well */
+		ixgbe_dma_free(adapter, &rxr->rxdma);
+	}
+
+	free(adapter->rx_rings, M_DEVBUF);
+}
+
+/*********************************************************************
+ *
+ *  Free receive ring data structures
+ *
+ **********************************************************************/
+void
+ixgbe_free_receive_buffers(struct rx_ring *rxr)
+{
+	struct adapter		*adapter = NULL;
+	struct ixgbe_rx_buf	*rxbuf = NULL;
+
+	INIT_DEBUGOUT("free_receive_buffers: begin");
+	adapter = rxr->adapter;
+	if (rxr->rx_buffers != NULL) {
+		rxbuf = &rxr->rx_buffers[0];
+		for (int i = 0; i < adapter->num_rx_desc; i++) {
+			int s = rxbuf->bigbuf;
+			if (rxbuf->map != NULL) {
+				bus_dmamap_unload(rxr->rxtag[s], rxbuf->map[s]);
+				bus_dmamap_destroy(rxr->rxtag[s], rxbuf->map[s]);
+			}
+			if (rxbuf->m_head != NULL) {
+				m_freem(rxbuf->m_head);
+			}
+			rxbuf->m_head = NULL;
+			++rxbuf;
+		}
+	}
+	if (rxr->rx_buffers != NULL) {
+		free(rxr->rx_buffers, M_DEVBUF);
+		rxr->rx_buffers = NULL;
+	}
+	for (int s = 0; s < 2; s++) {
+		if (rxr->rxtag[s] != NULL) {
+			bus_dma_tag_destroy(rxr->rxtag[s]);
+			rxr->rxtag[s] = NULL;
+		}
+	}
+	return;
+}
+
+/*********************************************************************
+ *
+ *  This routine executes in interrupt context. It replenishes
+ *  the mbufs in the descriptor and sends data which has been
+ *  dma'ed into host memory to upper layer.
+ *
+ *  We loop at most count times if count is > 0, or until done if
+ *  count < 0.
+ *
+ *********************************************************************/
+static int
+ixgbe_rxeof(struct rx_ring *rxr, int count)
+{
+	struct adapter 		*adapter = rxr->adapter;
+	struct ifnet   		*ifp = adapter->ifp;
+	struct mbuf    		*mp;
+	int             	len, i, eop = 0;
+	uint8_t			accept_frame = 0;
+	uint32_t		staterr;
+	union ixgbe_adv_rx_desc	*cur;
+
+
+	i = rxr->next_to_check;
+	cur = &rxr->rx_base[i];
+	staterr = cur->wb.upper.status_error;
+
+	if (!(staterr & IXGBE_RXD_STAT_DD))
+		return (0);
+
+	while ((staterr & IXGBE_RXD_STAT_DD) && (count != 0) &&
+	    (ifp->if_drv_flags & IFF_DRV_RUNNING)) {
+		struct mbuf *m = NULL;
+		int s;
+
+		mp = rxr->rx_buffers[i].m_head;
+		s = rxr->rx_buffers[i].bigbuf;
+		bus_dmamap_sync(rxr->rxtag[s], rxr->rx_buffers[i].map[s],
+				BUS_DMASYNC_POSTREAD);
+		accept_frame = 1;
+		if (staterr & IXGBE_RXD_STAT_EOP) {
+			count--;
+			eop = 1;
+		} else {
+			eop = 0;
+		}
+		len = cur->wb.upper.length;
+
+		if (staterr & IXGBE_RXDADV_ERR_FRAME_ERR_MASK)
+			accept_frame = 0;
+
+		if (accept_frame) {
+			/* Get a fresh buffer first */
+			if (ixgbe_get_buf(rxr, i) != 0) {
+				ifp->if_iqdrops++;
+				goto discard;
+			}
+
+			/* Assign correct length to the current fragment */
+			mp->m_len = len;
+
+			if (rxr->fmp == NULL) {
+				mp->m_pkthdr.len = len;
+				rxr->fmp = mp; /* Store the first mbuf */
+				rxr->lmp = mp;
+			} else {
+				/* Chain mbuf's together */
+				mp->m_flags &= ~M_PKTHDR;
+				rxr->lmp->m_next = mp;
+				rxr->lmp = rxr->lmp->m_next;
+				rxr->fmp->m_pkthdr.len += len;
+			}
+
+			if (eop) {
+				rxr->fmp->m_pkthdr.rcvif = ifp;
+				ifp->if_ipackets++;
+				rxr->packet_count++;
+				rxr->byte_count += rxr->fmp->m_pkthdr.len;
+
+				ixgbe_rx_checksum(adapter,
+				    staterr, rxr->fmp);
+
+				if (staterr & IXGBE_RXD_STAT_VP) {
+					rxr->fmp->m_pkthdr.ether_vtag =
+                                            le16toh(cur->wb.upper.vlan);
+                                        rxr->fmp->m_flags |= M_VLANTAG;
+				}
+				m = rxr->fmp;
+				rxr->fmp = NULL;
+				rxr->lmp = NULL;
+			}
+		} else {
+			ifp->if_ierrors++;
+discard:
+			/* Reuse loaded DMA map and just update mbuf chain */
+			mp = rxr->rx_buffers[i].m_head;
+			mp->m_len = mp->m_pkthdr.len =
+			    (rxr->rx_buffers[i].bigbuf ? MJUMPAGESIZE:MCLBYTES);
+			mp->m_data = mp->m_ext.ext_buf;
+			mp->m_next = NULL;
+			if (adapter->max_frame_size <= (MCLBYTES - ETHER_ALIGN))
+				m_adj(mp, ETHER_ALIGN);
+			if (rxr->fmp != NULL) {
+				m_freem(rxr->fmp);
+				rxr->fmp = NULL;
+				rxr->lmp = NULL;
+			}
+			m = NULL;
+		}
+
+		/* Zero out the receive descriptors status  */
+		cur->wb.upper.status_error = 0;
+		bus_dmamap_sync(rxr->rxdma.dma_tag, rxr->rxdma.dma_map,
+		    BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
+
+		rxr->last_cleaned = i; /* for updating tail */
+
+		if (++i == adapter->num_rx_desc)
+			i = 0;
+
+		/* Now send up to the stack */
+                if (m != NULL) {
+                        rxr->next_to_check = i;
+                        IXGBE_UNLOCK(adapter);
+                        (*ifp->if_input)(ifp, m);
+                        IXGBE_LOCK(adapter);
+                        i = rxr->next_to_check;
+                }
+		/* Get next descriptor */
+		cur = &rxr->rx_base[i];
+		staterr = cur->wb.upper.status_error;
+	}
+	rxr->next_to_check = i;
+
+	/* Advance the IXGB's Receive Queue "Tail Pointer" */
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_RDT(rxr->me), rxr->last_cleaned);
+
+	if (!(staterr & IXGBE_RXD_STAT_DD))
+		return (0);
+
+	return (1);
+}
+
+/*********************************************************************
+ *
+ *  Verify that the hardware indicated that the checksum is valid.
+ *  Inform the stack about the status of checksum so that stack
+ *  doesn't spend time verifying the checksum.
+ *
+ *********************************************************************/
+static void
+ixgbe_rx_checksum(struct adapter *adapter,
+    uint32_t staterr, struct mbuf * mp)
+{
+	uint16_t status = (uint16_t) staterr;
+	uint8_t  errors = (uint8_t) (staterr >> 24);
+
+	/* Not offloaded */
+	if (status & IXGBE_RXD_STAT_IXSM) {
+		mp->m_pkthdr.csum_flags = 0;
+		return;
+	}
+
+	if (status & IXGBE_RXD_STAT_IPCS) {
+		/* Did it pass? */
+		if (!(errors & IXGBE_RXD_ERR_IPE)) {
+			/* IP Checksum Good */
+			mp->m_pkthdr.csum_flags = CSUM_IP_CHECKED;
+			mp->m_pkthdr.csum_flags |= CSUM_IP_VALID;
+
+		} else
+			mp->m_pkthdr.csum_flags = 0;
+	}
+	if (status & IXGBE_RXD_STAT_L4CS) {
+		/* Did it pass? */
+		if (!(errors & IXGBE_RXD_ERR_TCPE)) {
+			mp->m_pkthdr.csum_flags |=
+				(CSUM_DATA_VALID | CSUM_PSEUDO_HDR);
+			mp->m_pkthdr.csum_data = htons(0xffff);
+		} 
+	}
+	return;
+}
+
+
+static void
+ixgbe_enable_vlans(struct adapter *adapter)
+{
+	uint32_t        ctrl;
+
+	ixgbe_disable_intr(adapter);
+	ctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_VLNCTRL);
+	ctrl |= IXGBE_VLNCTRL_VME | IXGBE_VLNCTRL_VFE;
+	ctrl &= ~IXGBE_VLNCTRL_CFIEN;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl);
+	ixgbe_enable_intr(adapter);
+
+	return;
+}
+
+
+static void
+ixgbe_enable_intr(struct adapter *adapter)
+{
+	u32 mask;
+
+	/* Set up what to auto clear */
+	if (adapter->msix) {
+		mask = IXGBE_EIMS_ENABLE_MASK;
+		mask &= ~IXGBE_EIMS_OTHER;
+		mask &= ~IXGBE_EIMS_LSC;
+		IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIAC, mask);
+	}
+
+	mask = IXGBE_EIMS_ENABLE_MASK;
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, IXGBE_EIMS_ENABLE_MASK);
+	IXGBE_WRITE_FLUSH(&adapter->hw);
+
+	return;
+}
+
+static void
+ixgbe_disable_intr(struct adapter *adapter)
+{
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0);
+	return;
+}
+
+u16
+ixgbe_read_pci_cfg(struct ixgbe_hw *hw, u32 reg)
+{
+	u16 value;
+
+	value = pci_read_config(((struct ixgbe_osdep *)hw->back)->dev,
+	    reg, 2);
+
+	return (value);
+}
+
+static void
+ixgbe_set_ivar(struct adapter *adapter, u16 entry, u8 vector)
+{
+	u32 ivar, index;
+	vector |= IXGBE_IVAR_ALLOC_VAL;
+	index = (entry >> 2) & 0x1F;
+	ivar = IXGBE_READ_REG(&adapter->hw, IXGBE_IVAR(index));
+	ivar |= (vector << (8 * (entry & 0x3)));
+	IXGBE_WRITE_REG(&adapter->hw, IXGBE_IVAR(index), ivar);
+}
+
+static void
+ixgbe_configure_ivars(struct adapter *adapter)
+{
+	int	i, vec;
+
+        for (i = 0, vec = 1; i < adapter->num_rx_queues; i++, vec++)
+                ixgbe_set_ivar(adapter, IXGBE_IVAR_RX_QUEUE(i), vec);
+
+        for (i = 0, vec = 8; i < adapter->num_tx_queues; i++, vec++)
+		ixgbe_set_ivar(adapter, IXGBE_IVAR_TX_QUEUE(i), vec);
+
+	/* For the Link interrupt */
+        ixgbe_set_ivar(adapter, IXGBE_IVAR_OTHER_CAUSES_INDEX, 0);
+}
+
+/**********************************************************************
+ *
+ *  Update the board statistics counters.
+ *
+ **********************************************************************/
+static void
+ixgbe_update_stats_counters(struct adapter *adapter)
+{
+	struct ifnet   *ifp;
+	struct ixgbe_hw *hw = &adapter->hw;
+	u64  good_rx, missed_rx;
+
+	adapter->stats.crcerrs += IXGBE_READ_REG(hw, IXGBE_CRCERRS);
+
+	good_rx = IXGBE_READ_REG(hw, IXGBE_GPRC);
+	missed_rx  = IXGBE_READ_REG(hw, IXGBE_MPC(0));
+	missed_rx += IXGBE_READ_REG(hw, IXGBE_MPC(1));
+	missed_rx += IXGBE_READ_REG(hw, IXGBE_MPC(2));
+	missed_rx += IXGBE_READ_REG(hw, IXGBE_MPC(3));
+	missed_rx += IXGBE_READ_REG(hw, IXGBE_MPC(4));
+	missed_rx += IXGBE_READ_REG(hw, IXGBE_MPC(5));
+	missed_rx += IXGBE_READ_REG(hw, IXGBE_MPC(6));
+	missed_rx += IXGBE_READ_REG(hw, IXGBE_MPC(7));
+
+	adapter->stats.gprc += (good_rx - missed_rx);
+
+        adapter->stats.mpc[0] += missed_rx;
+	adapter->stats.gorc += IXGBE_READ_REG(hw, IXGBE_GORCH);
+	adapter->stats.bprc += IXGBE_READ_REG(hw, IXGBE_BPRC);
+	adapter->stats.mprc += IXGBE_READ_REG(hw, IXGBE_MPRC);
+	/*
+	 * Workaround: mprc hardware is incorrectly counting
+	 * broadcasts, so for now we subtract those.
+	 */
+	adapter->stats.mprc -= adapter->stats.bprc;
+	adapter->stats.roc += IXGBE_READ_REG(hw, IXGBE_ROC);
+	adapter->stats.prc64 += IXGBE_READ_REG(hw, IXGBE_PRC64);
+	adapter->stats.prc127 += IXGBE_READ_REG(hw, IXGBE_PRC127);
+	adapter->stats.prc255 += IXGBE_READ_REG(hw, IXGBE_PRC255);
+	adapter->stats.prc511 += IXGBE_READ_REG(hw, IXGBE_PRC511);
+	adapter->stats.prc1023 += IXGBE_READ_REG(hw, IXGBE_PRC1023);
+	adapter->stats.prc1522 += IXGBE_READ_REG(hw, IXGBE_PRC1522);
+
+	adapter->stats.rlec += IXGBE_READ_REG(hw, IXGBE_RLEC);
+	adapter->stats.lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXC);
+	adapter->stats.lxontxc += IXGBE_READ_REG(hw, IXGBE_LXONTXC);
+	adapter->stats.lxoffrxc += IXGBE_READ_REG(hw, IXGBE_LXOFFRXC);
+	adapter->stats.lxofftxc += IXGBE_READ_REG(hw, IXGBE_LXOFFTXC);
+	adapter->stats.ruc += IXGBE_READ_REG(hw, IXGBE_RUC);
+	adapter->stats.gptc += IXGBE_READ_REG(hw, IXGBE_GPTC);
+	adapter->stats.gotc += IXGBE_READ_REG(hw, IXGBE_GOTCH);
+	adapter->stats.rnbc[0] += IXGBE_READ_REG(hw, IXGBE_RNBC(0));
+	adapter->stats.ruc += IXGBE_READ_REG(hw, IXGBE_RUC);
+	adapter->stats.rfc += IXGBE_READ_REG(hw, IXGBE_RFC);
+	adapter->stats.rjc += IXGBE_READ_REG(hw, IXGBE_RJC);
+	adapter->stats.tor += IXGBE_READ_REG(hw, IXGBE_TORH);
+	adapter->stats.gotc += IXGBE_READ_REG(hw, IXGBE_GOTCH);
+	adapter->stats.tpr += IXGBE_READ_REG(hw, IXGBE_TPR);
+	adapter->stats.ptc64 += IXGBE_READ_REG(hw, IXGBE_PTC64);
+	adapter->stats.ptc127 += IXGBE_READ_REG(hw, IXGBE_PTC127);
+	adapter->stats.ptc255 += IXGBE_READ_REG(hw, IXGBE_PTC255);
+	adapter->stats.ptc511 += IXGBE_READ_REG(hw, IXGBE_PTC511);
+	adapter->stats.ptc1023 += IXGBE_READ_REG(hw, IXGBE_PTC1023);
+	adapter->stats.ptc1522 += IXGBE_READ_REG(hw, IXGBE_PTC1522);
+	adapter->stats.mptc += IXGBE_READ_REG(hw, IXGBE_MPTC);
+	adapter->stats.bptc += IXGBE_READ_REG(hw, IXGBE_BPTC);
+
+	ifp = adapter->ifp;
+
+	/* Fill out the OS statistics structure */
+	ifp->if_ipackets = adapter->stats.gprc;
+	ifp->if_opackets = adapter->stats.gptc;
+	ifp->if_ibytes = adapter->stats.gorc;
+	ifp->if_obytes = adapter->stats.gotc;
+	ifp->if_imcasts = adapter->stats.mprc;
+	ifp->if_collisions = 0;
+
+	/* Rx Errors */
+	ifp->if_ierrors =
+		adapter->dropped_pkts +
+		adapter->stats.crcerrs +
+		adapter->stats.rlec;
+
+}
+
+
+/**********************************************************************
+ *
+ *  This routine is called only when ixgbe_display_debug_stats is enabled.
+ *  This routine provides a way to take a look at important statistics
+ *  maintained by the driver and hardware.
+ *
+ **********************************************************************/
+static void
+ixgbe_print_hw_stats(struct adapter * adapter)
+{
+	device_t dev = adapter->dev;
+
+
+	device_printf(dev,"Tx Descriptors not Avail1 = %ld\n",
+	       adapter->no_tx_desc_avail1);
+	device_printf(dev,"Tx Descriptors not Avail2 = %ld\n",
+	       adapter->no_tx_desc_avail2);
+	device_printf(dev,"Std Mbuf Failed = %ld\n",
+	       adapter->mbuf_alloc_failed);
+	device_printf(dev,"Std Cluster Failed = %ld\n",
+	       adapter->mbuf_cluster_failed);
+
+	device_printf(dev,"Missed Packets = %lld\n",
+	       (long long)adapter->stats.mprc);
+	device_printf(dev,"Receive length errors = %lld\n",
+	       (long long)adapter->stats.rlec);
+	device_printf(dev,"Crc errors = %lld\n",
+	       (long long)adapter->stats.crcerrs);
+	device_printf(dev,"Driver dropped packets = %ld\n",
+	       adapter->dropped_pkts);
+
+	device_printf(dev,"XON Rcvd = %lld\n",
+	       (long long)adapter->stats.lxonrxc);
+	device_printf(dev,"XON Xmtd = %lld\n",
+	       (long long)adapter->stats.lxontxc);
+	device_printf(dev,"XOFF Rcvd = %lld\n",
+	       (long long)adapter->stats.lxoffrxc);
+	device_printf(dev,"XOFF Xmtd = %lld\n",
+	       (long long)adapter->stats.lxofftxc);
+
+	device_printf(dev,"Total Packets Rcvd = %lld\n",
+	       (long long)adapter->stats.tpr);
+	device_printf(dev,"Good Packets Rcvd = %lld\n",
+	       (long long)adapter->stats.gprc);
+	device_printf(dev,"Good Packets Xmtd = %lld\n",
+	       (long long)adapter->stats.gptc);
+	device_printf(dev,"TSO Transmissions = %ld\n",
+	       adapter->tso_tx);
+
+	return;
+}
+
+/**********************************************************************
+ *
+ *  This routine is called only when em_display_debug_stats is enabled.
+ *  This routine provides a way to take a look at important statistics
+ *  maintained by the driver and hardware.
+ *
+ **********************************************************************/
+static void
+ixgbe_print_debug_info(struct adapter *adapter)
+{
+	device_t dev = adapter->dev;
+	struct rx_ring *rxr = adapter->rx_rings;
+	struct ixgbe_hw *hw = &adapter->hw;
+	uint8_t *hw_addr = adapter->hw.hw_addr;
+ 
+	device_printf(dev,"Adapter hardware address = %p \n", hw_addr);
+	device_printf(dev,"CTRL = 0x%x RXCTRL = 0x%x \n",
+	    IXGBE_READ_REG(hw, IXGBE_TXDCTL(0)),
+	    IXGBE_READ_REG(hw, IXGBE_RXCTRL)); 
+	device_printf(dev,"RXDCTL(0) = 0x%x RXDCTL(1) = 0x%x"
+	    " RXCTRL(2) = 0x%x \n",
+	    IXGBE_READ_REG(hw, IXGBE_RXDCTL(0)),
+	    IXGBE_READ_REG(hw, IXGBE_RXDCTL(1)),
+	    IXGBE_READ_REG(hw, IXGBE_RXDCTL(2)));
+	device_printf(dev,"SRRCTL(0) = 0x%x SRRCTL(1) = 0x%x"
+	    " SRRCTL(2) = 0x%x \n",
+	    IXGBE_READ_REG(hw, IXGBE_SRRCTL(0)),
+	    IXGBE_READ_REG(hw, IXGBE_SRRCTL(1)),
+	    IXGBE_READ_REG(hw, IXGBE_SRRCTL(2)));
+	device_printf(dev,"EIMC = 0x%x EIMS = 0x%x\n",
+	    IXGBE_READ_REG(hw, IXGBE_EIMC),
+	    IXGBE_READ_REG(hw, IXGBE_EIMS));
+	device_printf(dev,"Queue(0) tdh = %d, hw tdt = %d\n",
+	    IXGBE_READ_REG(hw, IXGBE_TDH(0)),
+	    IXGBE_READ_REG(hw, IXGBE_TDT(0)));
+	device_printf(dev,"Total Packets Received = %d \n",
+	    IXGBE_READ_REG(hw, IXGBE_TPR));
+	device_printf(dev,"Error Byte Count = %d \n",
+	    IXGBE_READ_REG(hw, IXGBE_ERRBC));
+	device_printf(dev,"Rx Length Errors = %d \n",
+	    IXGBE_READ_REG(hw, IXGBE_RLEC));
+	device_printf(dev,"Rx CRC Errors = %d \n",
+	    IXGBE_READ_REG(hw, IXGBE_CRCERRS));
+
+	for (int i = 0; i < adapter->num_rx_queues; i++, rxr++) {
+		device_printf(dev,"Queue %d Packets Received: %lx\n",
+	    	    rxr->me, (long)rxr->packet_count);
+	}
+
+	rxr = adapter->rx_rings; // Reset
+	for (int i = 0; i < adapter->num_rx_queues; i++, rxr++) {
+		device_printf(dev,"Queue %d Bytes Received: %lx\n",
+	    	    rxr->me, (long)rxr->byte_count);
+	}
+
+	for (int i = 0; i < adapter->num_rx_queues; i++) {
+		device_printf(dev,"Queue[%d]: rdh = %d, hw rdt = %d\n",
+	    	    i, IXGBE_READ_REG(hw, IXGBE_RDH(i)),
+	    	    IXGBE_READ_REG(hw, IXGBE_RDT(i)));
+	}
+	device_printf(dev,"Std mbuf failed = %ld\n",
+	    adapter->mbuf_alloc_failed);
+	device_printf(dev,"Std mbuf cluster failed = %ld\n",
+	    adapter->mbuf_cluster_failed);
+	device_printf(dev,"Driver dropped packets = %ld\n",
+	    adapter->dropped_pkts);
+
+	return;
+}
+
+static int
+ixgbe_sysctl_stats(SYSCTL_HANDLER_ARGS)
+{
+	int             error;
+	int             result;
+	struct adapter *adapter;
+
+	result = -1;
+	error = sysctl_handle_int(oidp, &result, 0, req);
+
+	if (error || !req->newptr)
+		return (error);
+
+	if (result == 1) {
+		adapter = (struct adapter *) arg1;
+		ixgbe_print_hw_stats(adapter);
+	}
+	return error;
+}
+
+static int
+ixgbe_sysctl_debug(SYSCTL_HANDLER_ARGS)
+{
+	int error, result;
+	struct adapter *adapter;
+
+	result = -1;
+	error = sysctl_handle_int(oidp, &result, 0, req);
+
+	if (error || !req->newptr)
+		return (error);
+
+	if (result == 1) {
+		adapter = (struct adapter *) arg1;
+		ixgbe_print_debug_info(adapter);
+	}
+	return error;
+}
+
+static void
+ixgbe_add_rx_process_limit(struct adapter *adapter, const char *name,
+        const char *description, int *limit, int value)
+{
+        *limit = value;
+        SYSCTL_ADD_INT(device_get_sysctl_ctx(adapter->dev),
+            SYSCTL_CHILDREN(device_get_sysctl_tree(adapter->dev)),
+            OID_AUTO, name, CTLTYPE_INT|CTLFLAG_RW, limit, value, description);
+}
diff --git a/sys/dev/ixgbe/ixgbe.h b/sys/dev/ixgbe/ixgbe.h
new file mode 100644
index 0000000..c75c167
--- /dev/null
+++ b/sys/dev/ixgbe/ixgbe.h
@@ -0,0 +1,348 @@
+/**************************************************************************
+
+Copyright (c) 2001-2007, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+/* $FreeBSD$ */
+
+#ifndef _IXGBE_H_
+#define _IXGBE_H_
+
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/mbuf.h>
+#include <sys/protosw.h>
+#include <sys/socket.h>
+#include <sys/malloc.h>
+#include <sys/kernel.h>
+#include <sys/module.h>
+#include <sys/sockio.h>
+
+#include <net/if.h>
+#include <net/if_arp.h>
+#include <net/bpf.h>
+#include <net/ethernet.h>
+#include <net/if_dl.h>
+#include <net/if_media.h>
+
+#include <net/bpf.h>
+#include <net/if_types.h>
+#include <net/if_vlan_var.h>
+
+#include <netinet/in_systm.h>
+#include <netinet/in.h>
+#include <netinet/if_ether.h>
+#include <netinet/ip.h>
+#include <netinet/ip6.h>
+#include <netinet/tcp.h>
+#include <netinet/udp.h>
+
+#include <machine/in_cksum.h>
+
+#include <sys/bus.h>
+#include <machine/bus.h>
+#include <sys/rman.h>
+#include <machine/resource.h>
+#include <vm/vm.h>
+#include <vm/pmap.h>
+#include <machine/clock.h>
+#include <dev/pci/pcivar.h>
+#include <dev/pci/pcireg.h>
+#include <sys/proc.h>
+#include <sys/sysctl.h>
+#include <sys/endian.h>
+#include <sys/taskqueue.h>
+
+#include "ixgbe_api.h"
+
+/* Tunables */
+
+/*
+** The number of queues: right now significant performance
+** seems to be gained by using muliple RX queues. The
+** infrastructure for multiple TX is there but its not
+** completely working, dont set greater than 1 for now.
+** OTHER is the vector used for link changes, it also 
+** should only be set to 1.
+*/
+#define IXGBE_TX_QUEUES 1
+#define IXGBE_RX_QUEUES 8
+#define IXGBE_OTHER	1
+
+/*
+ * TxDescriptors Valid Range: 64-4096 Default Value: 2048 This value is the
+ * number of transmit descriptors allocated by the driver. Increasing this
+ * value allows the driver to queue more transmits. Each descriptor is 16
+ * bytes.
+ */
+#define DEFAULT_TXD	2048
+#define MAX_TXD		4096
+#define MIN_TXD		64
+
+/*
+ * RxDescriptors Valid Range: 64-4096 Default Value: 2048 This value is the
+ * number of receive descriptors allocated by the driver. Increasing this
+ * value allows the driver to buffer more incoming packets. Each descriptor
+ * is 16 bytes.  A receive buffer is also allocated for each descriptor. The
+ * maximum MTU size is 16110.
+ * 
+ */
+#define DEFAULT_RXD	2048
+#define MAX_RXD		4096
+#define MIN_RXD		64
+
+/*
+ * This parameter controls the maximum no of times the driver will loop in
+ * the isr. Minimum Value = 1
+ */
+#define MAX_INTR	10
+
+/*
+ * This parameter controls the duration of transmit watchdog timer.
+ */
+#define IXGBE_TX_TIMEOUT                   5	/* set to 5 seconds */
+
+/*
+ * This parameters control when the driver calls the routine to reclaim
+ * transmit descriptors.
+ */
+#define IXGBE_TX_CLEANUP_THRESHOLD	(adapter->num_tx_desc / 8)
+#define IXGBE_TX_OP_THRESHOLD		(adapter->num_tx_desc / 32)
+
+#define IXGBE_MAX_FRAME_SIZE	0x3F00
+#define PERFORMANCE_MTU		9000	/* Best thruput results */
+
+/*
+** This controls the size mbuf pool used, it
+** may ultimately be automatic, but for now its
+** a compile time option. 
+**	- use MCLBYTES for legacy size
+*/
+#define IXGBE_RXBUF		MJUMPAGESIZE
+
+/* Defines for printing debug information */
+#define DEBUG_INIT  0
+#define DEBUG_IOCTL 0
+#define DEBUG_HW    0
+
+#define INIT_DEBUGOUT(S)            if (DEBUG_INIT)  printf(S "\n")
+#define INIT_DEBUGOUT1(S, A)        if (DEBUG_INIT)  printf(S "\n", A)
+#define INIT_DEBUGOUT2(S, A, B)     if (DEBUG_INIT)  printf(S "\n", A, B)
+#define IOCTL_DEBUGOUT(S)           if (DEBUG_IOCTL) printf(S "\n")
+#define IOCTL_DEBUGOUT1(S, A)       if (DEBUG_IOCTL) printf(S "\n", A)
+#define IOCTL_DEBUGOUT2(S, A, B)    if (DEBUG_IOCTL) printf(S "\n", A, B)
+#define HW_DEBUGOUT(S)              if (DEBUG_HW) printf(S "\n")
+#define HW_DEBUGOUT1(S, A)          if (DEBUG_HW) printf(S "\n", A)
+#define HW_DEBUGOUT2(S, A, B)       if (DEBUG_HW) printf(S "\n", A, B)
+
+#define MAX_NUM_MULTICAST_ADDRESSES     128
+#define IXGBE_MAX_SCATTER		100
+#define	IXGBE_MMBA			0x0010
+#define IXGBE_TSO_SIZE			65535
+#define IXGBE_TX_BUFFER_SIZE		((u32) 1514)
+#define IXGBE_RX_HDR_SIZE		((u32) 256)
+#define CSUM_OFFLOAD			7	/* Bits in csum flags */
+
+/* The number of MSIX messages the 82598 supports */
+#define IXGBE_MSGS			18
+
+/*
+ * Interrupt Moderation parameters 
+ * 	for now we hardcode, later
+ *	it would be nice to do dynamic
+ */
+#define DEFAULT_ITR	8000	
+#define LINK_ITR	1950	
+
+/*
+ * ******************************************************************************
+ * vendor_info_array
+ * 
+ * This array contains the list of Subvendor/Subdevice IDs on which the driver
+ * should load.
+ * 
+*****************************************************************************
+ */
+typedef struct _ixgbe_vendor_info_t {
+	unsigned int    vendor_id;
+	unsigned int    device_id;
+	unsigned int    subvendor_id;
+	unsigned int    subdevice_id;
+	unsigned int    index;
+}               ixgbe_vendor_info_t;
+
+
+struct ixgbe_tx_buf {
+	int		next_eop;
+	struct mbuf	*m_head;
+	bus_dmamap_t	map;
+};
+
+struct ixgbe_rx_buf {
+	struct mbuf	*m_head;
+	boolean_t	bigbuf;
+	/* one small and one large map */
+	bus_dmamap_t	map[2];
+};
+
+/*
+ * Bus dma allocation structure used by ixgbe_dma_malloc and ixgbe_dma_free.
+ */
+struct ixgbe_dma_alloc {
+	bus_addr_t		dma_paddr;
+	caddr_t			dma_vaddr;
+	bus_dma_tag_t		dma_tag;
+	bus_dmamap_t		dma_map;
+	bus_dma_segment_t	dma_seg;
+	bus_size_t		dma_size;
+	int			dma_nseg;
+};
+
+/*
+ * The transmit ring, one per tx queue
+ */
+struct tx_ring {
+        struct adapter		*adapter;
+	u32			me;
+	struct mtx		mtx;
+	union ixgbe_adv_tx_desc	*tx_base;
+	struct ixgbe_dma_alloc	txdma;
+	uint32_t		next_avail_tx_desc;
+	uint32_t		next_tx_to_clean;
+	struct ixgbe_tx_buf	*tx_buffers;
+	volatile uint16_t	tx_avail;
+	uint32_t		txd_cmd;
+	bus_dma_tag_t		txtag;
+};
+
+
+/*
+ * The Receive ring, one per rx queue
+ */
+struct rx_ring {
+        struct adapter			*adapter;
+	u32				me;
+	struct mtx			mtx;
+	u32				payload;
+	union 	ixgbe_adv_rx_desc	*rx_base;
+	struct ixgbe_dma_alloc		rxdma;
+        unsigned int			last_cleaned;
+        unsigned int			next_to_check;
+	struct ixgbe_rx_buf		*rx_buffers;
+	bus_dma_tag_t			rxtag[2];
+	bus_dmamap_t			spare_map[2];
+	struct mbuf			*fmp;
+	struct mbuf			*lmp;
+	/* Soft stats */
+	u64				packet_count;
+	u64 				byte_count;
+};
+
+/* Our adapter structure */
+struct adapter {
+	struct ifnet	*ifp;
+	struct ixgbe_hw	hw;
+
+	/* FreeBSD operating-system-specific structures */
+	struct ixgbe_osdep	osdep;
+
+	struct device	*dev;
+	struct resource	*res_memory;
+	struct resource	*res_msix;
+
+	/*
+	 * Interrupt resources:
+	 *  Oplin has 20 MSIX messages
+	 *  so allocate that for now.
+	 */
+	void		*tag[IXGBE_MSGS];
+	struct resource *res[IXGBE_MSGS];
+	int		rid[IXGBE_MSGS];
+
+	struct ifmedia	media;
+	struct callout	timer;
+	int		watchdog_timer;
+	int		msix;
+	int		if_flags;
+	struct mtx	mtx;
+	
+	/* Info about the board itself */
+	uint32_t       part_num;
+	boolean_t      link_active;
+	uint16_t       max_frame_size;
+	uint16_t       link_duplex;
+	uint32_t       tx_int_delay;
+	uint32_t       tx_abs_int_delay;
+	uint32_t       rx_int_delay;
+	uint32_t       rx_abs_int_delay;
+
+	/* Indicates the cluster size to use */
+	boolean_t	bigbufs;
+
+	/*
+	 * Transmit rings:
+	 *	Allocated at run time, an array of rings.
+	 */
+	struct tx_ring	*tx_rings;
+	int		num_tx_desc;
+	int		num_tx_queues;
+
+	/*
+	 * Receive rings:
+	 *	Allocated at run time, an array of rings.
+	 */
+	struct rx_ring	*rx_rings;
+	int		num_rx_desc;
+	int		num_rx_queues;
+	uint32_t	rx_process_limit;
+
+	/* Misc stats maintained by the driver */
+	unsigned long   dropped_pkts;
+	unsigned long   mbuf_alloc_failed;
+	unsigned long   mbuf_cluster_failed;
+	unsigned long   no_tx_desc_avail1;
+	unsigned long   no_tx_desc_avail2;
+	unsigned long   no_tx_map_avail;
+	unsigned long   no_tx_dma_setup;
+	unsigned long   watchdog_events;
+	unsigned long   tso_tx;
+
+	struct ixgbe_hw_stats stats;
+};
+
+#define IXGBE_LOCK_INIT(_sc, _name) \
+	mtx_init(&(_sc)->mtx, _name, MTX_NETWORK_LOCK, MTX_DEF)
+#define IXGBE_LOCK_DESTROY(_sc)	mtx_destroy(&(_sc)->mtx)
+#define IXGBE_LOCK(_sc)		mtx_lock(&(_sc)->mtx)
+#define IXGBE_UNLOCK(_sc)	mtx_unlock(&(_sc)->mtx)
+#define IXGBE_LOCK_ASSERT(_sc)	mtx_assert(&(_sc)->mtx, MA_OWNED)
+
+#endif /* _IXGBE_H_ */
diff --git a/sys/dev/ixgbe/ixgbe_82598.c b/sys/dev/ixgbe/ixgbe_82598.c
new file mode 100644
index 0000000..f7e5b21
--- /dev/null
+++ b/sys/dev/ixgbe/ixgbe_82598.c
@@ -0,0 +1,728 @@
+/*******************************************************************************
+
+  Copyright (c) 2001-2007, Intel Corporation 
+  All rights reserved.
+  
+  Redistribution and use in source and binary forms, with or without 
+  modification, are permitted provided that the following conditions are met:
+  
+   1. Redistributions of source code must retain the above copyright notice, 
+      this list of conditions and the following disclaimer.
+  
+   2. Redistributions in binary form must reproduce the above copyright 
+      notice, this list of conditions and the following disclaimer in the 
+      documentation and/or other materials provided with the distribution.
+  
+   3. Neither the name of the Intel Corporation nor the names of its 
+      contributors may be used to endorse or promote products derived from 
+      this software without specific prior written permission.
+  
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+  POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+/* $FreeBSD$ */
+
+#include "ixgbe_type.h"
+#include "ixgbe_api.h"
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+
+#define IXGBE_82598_MAX_TX_QUEUES 32
+#define IXGBE_82598_MAX_RX_QUEUES 64
+#define IXGBE_82598_RAR_ENTRIES   16
+
+s32 ixgbe_init_shared_code_82598(struct ixgbe_hw *hw);
+s32 ixgbe_assign_func_pointers_82598(struct ixgbe_hw *hw);
+s32 ixgbe_get_link_settings_82598(struct ixgbe_hw *hw,
+				  ixgbe_link_speed *speed,
+				  bool *autoneg);
+s32 ixgbe_get_copper_link_settings_82598(struct ixgbe_hw *hw,
+					 ixgbe_link_speed *speed,
+					 bool *autoneg);
+enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw);
+u32 ixgbe_get_num_of_tx_queues_82598(struct ixgbe_hw *hw);
+u32 ixgbe_get_num_of_rx_queues_82598(struct ixgbe_hw *hw);
+s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw);
+s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw,
+			       ixgbe_link_speed *speed,
+			       bool *link_up);
+s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw,
+				     ixgbe_link_speed speed,
+				     bool autoneg,
+				     bool autoneg_wait_to_complete);
+s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw);
+s32 ixgbe_check_copper_link_82598(struct ixgbe_hw *hw,
+				  ixgbe_link_speed *speed,
+				  bool *link_up);
+s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw,
+					ixgbe_link_speed speed,
+					bool autoneg,
+					bool autoneg_wait_to_complete);
+#ifndef NO_82598_A0_SUPPORT
+s32 ixgbe_reset_hw_rev_0_82598(struct ixgbe_hw *hw);
+#endif
+s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw);
+u32 ixgbe_get_num_rx_addrs_82598(struct ixgbe_hw *hw);
+
+
+/**
+ *  ixgbe_init_shared_code_82598 - Inits func ptrs and MAC type
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize the shared code for 82598. This will assign function pointers
+ *  and assign the MAC type.  Does not touch the hardware.
+ **/
+s32 ixgbe_init_shared_code_82598(struct ixgbe_hw *hw)
+{
+	/* Set MAC type */
+	hw->mac.type = ixgbe_mac_82598EB;
+
+	/* Assign function pointers */
+	ixgbe_assign_func_pointers_82598(hw);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_assign_func_pointers_82598 - Assigns 82598-specific funtion pointers
+ *  @hw: pointer to hardware structure
+ *
+ *  Note - Generic function pointers have already been assigned, so the
+ *  function pointers set here are only for 82598-specific functions.
+ **/
+s32 ixgbe_assign_func_pointers_82598(struct ixgbe_hw *hw)
+{
+
+	hw->func.ixgbe_func_get_media_type =
+			       &ixgbe_get_media_type_82598;
+	hw->func.ixgbe_func_get_num_of_tx_queues =
+			       &ixgbe_get_num_of_tx_queues_82598;
+	hw->func.ixgbe_func_get_num_of_rx_queues =
+			       &ixgbe_get_num_of_rx_queues_82598;
+#ifndef NO_82598_A0_SUPPORT
+	if (hw->revision_id == 0) {
+		hw->func.ixgbe_func_reset_hw =
+			       &ixgbe_reset_hw_rev_0_82598;
+	} else {
+		hw->func.ixgbe_func_reset_hw = &ixgbe_reset_hw_82598;
+	}
+#else
+	hw->func.ixgbe_func_reset_hw = &ixgbe_reset_hw_82598;
+#endif
+
+	hw->func.ixgbe_func_get_num_rx_addrs =
+			       &ixgbe_get_num_rx_addrs_82598;
+
+	/* Link */
+	if (ixgbe_get_media_type(hw) == ixgbe_media_type_copper) {
+		hw->func.ixgbe_func_setup_link =
+			       &ixgbe_setup_copper_link_82598;
+		hw->func.ixgbe_func_check_link =
+			       &ixgbe_check_copper_link_82598;
+		hw->func.ixgbe_func_setup_link_speed =
+			       &ixgbe_setup_copper_link_speed_82598;
+		hw->func.ixgbe_func_get_link_settings =
+			       &ixgbe_get_copper_link_settings_82598;
+	} else {
+		hw->func.ixgbe_func_setup_link =
+			       &ixgbe_setup_mac_link_82598;
+		hw->func.ixgbe_func_check_link =
+			       &ixgbe_check_mac_link_82598;
+		hw->func.ixgbe_func_setup_link_speed =
+			       &ixgbe_setup_mac_link_speed_82598;
+		hw->func.ixgbe_func_get_link_settings =
+			       &ixgbe_get_link_settings_82598;
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_get_link_settings_82598 - Determines default link settings
+ *  @hw: pointer to hardware structure
+ *  @speed: pointer to link speed
+ *  @autoneg: boolean auto-negotiation value
+ *
+ *  Determines the default link settings by reading the AUTOC register.
+ **/
+s32 ixgbe_get_link_settings_82598(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+				  bool *autoneg)
+{
+	s32 status = IXGBE_SUCCESS;
+	s32 autoc_reg;
+
+	autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+	if (hw->mac.link_settings_loaded) {
+		autoc_reg &= ~IXGBE_AUTOC_LMS_ATTACH_TYPE;
+		autoc_reg &= ~IXGBE_AUTOC_LMS_MASK;
+		autoc_reg |= hw->mac.link_attach_type;
+		autoc_reg |= hw->mac.link_mode_select;
+	}
+
+	switch (autoc_reg & IXGBE_AUTOC_LMS_MASK) {
+	case IXGBE_AUTOC_LMS_1G_LINK_NO_AN:
+		*speed = IXGBE_LINK_SPEED_1GB_FULL;
+		*autoneg = FALSE;
+		break;
+
+	case IXGBE_AUTOC_LMS_10G_LINK_NO_AN:
+		*speed = IXGBE_LINK_SPEED_10GB_FULL;
+		*autoneg = FALSE;
+		break;
+
+	case IXGBE_AUTOC_LMS_1G_AN:
+		*speed = IXGBE_LINK_SPEED_1GB_FULL;
+		*autoneg = TRUE;
+		break;
+
+	case IXGBE_AUTOC_LMS_KX4_AN:
+	case IXGBE_AUTOC_LMS_KX4_AN_1G_AN:
+		*speed = IXGBE_LINK_SPEED_UNKNOWN;
+		if (autoc_reg & IXGBE_AUTOC_KX4_SUPP) {
+			*speed |= IXGBE_LINK_SPEED_10GB_FULL;
+		}
+		if (autoc_reg & IXGBE_AUTOC_KX_SUPP) {
+			*speed |= IXGBE_LINK_SPEED_1GB_FULL;
+		}
+		*autoneg = TRUE;
+		break;
+
+	default:
+		status = IXGBE_ERR_LINK_SETUP;
+		break;
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_get_copper_link_settings_82598 - Determines default link settings
+ *  @hw: pointer to hardware structure
+ *  @speed: pointer to link speed
+ *  @autoneg: boolean auto-negotiation value
+ *
+ *  Determines the default link settings by reading the AUTOC register.
+ **/
+s32 ixgbe_get_copper_link_settings_82598(struct ixgbe_hw *hw,
+					 ixgbe_link_speed *speed,
+					 bool *autoneg)
+{
+	s32 status = IXGBE_ERR_LINK_SETUP;
+	u16 speed_ability;
+
+	*speed = 0;
+	*autoneg = TRUE;
+
+	status = ixgbe_read_phy_reg(hw, IXGBE_MDIO_PHY_SPEED_ABILITY,
+				    IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+				    &speed_ability);
+
+	if (status == IXGBE_SUCCESS) {
+		if (speed_ability & IXGBE_MDIO_PHY_SPEED_10G)
+		    *speed |= IXGBE_LINK_SPEED_10GB_FULL;
+		if (speed_ability & IXGBE_MDIO_PHY_SPEED_1G)
+		    *speed |= IXGBE_LINK_SPEED_1GB_FULL;
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_get_media_type_82598 - Determines media type
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the media type (fiber, copper, backplane)
+ **/
+enum ixgbe_media_type ixgbe_get_media_type_82598(struct ixgbe_hw *hw)
+{
+	enum ixgbe_media_type media_type;
+
+	/* Media type for I82598 is based on device ID */
+	switch (hw->device_id) {
+	case IXGBE_DEV_ID_82598:
+		/* Default device ID is mezzanine card KX/KX4 */
+		media_type = ixgbe_media_type_backplane;
+		break;
+	case IXGBE_DEV_ID_82598_FPGA:
+	case IXGBE_DEV_ID_82598AF_DUAL_PORT:
+	case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
+		media_type = ixgbe_media_type_fiber;
+		break;
+	case IXGBE_DEV_ID_82598AT_DUAL_PORT:
+		media_type = ixgbe_media_type_copper;
+		break;
+	default:
+		media_type = ixgbe_media_type_unknown;
+		break;
+	}
+
+	return media_type;
+}
+
+/**
+ *  ixgbe_get_num_of_tx_queues_82598 - Get number of TX queues
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the number of transmit queues for the given adapter.
+ **/
+u32 ixgbe_get_num_of_tx_queues_82598(struct ixgbe_hw *hw)
+{
+	if (hw->device_id == IXGBE_DEV_ID_82598_FPGA)
+		return 8;
+
+	return IXGBE_82598_MAX_TX_QUEUES;
+}
+
+/**
+ *  ixgbe_get_num_of_rx_queues_82598 - Get number of RX queues
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the number of receive queues for the given adapter.
+ **/
+u32 ixgbe_get_num_of_rx_queues_82598(struct ixgbe_hw *hw)
+{
+	if (hw->device_id == IXGBE_DEV_ID_82598_FPGA)
+		return 8;
+
+	return IXGBE_82598_MAX_RX_QUEUES;
+}
+
+/**
+ *  ixgbe_setup_mac_link_82598 - Configures MAC link settings
+ *  @hw: pointer to hardware structure
+ *
+ *  Configures link settings based on values in the ixgbe_hw struct.
+ *  Restarts the link.  Performs autonegotiation if needed.
+ **/
+s32 ixgbe_setup_mac_link_82598(struct ixgbe_hw *hw)
+{
+	u32 autoc_reg;
+	u32 links_reg;
+	u32 i;
+	s32 status = IXGBE_SUCCESS;
+
+	autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+
+	if (hw->mac.link_settings_loaded) {
+		autoc_reg &= ~IXGBE_AUTOC_LMS_ATTACH_TYPE;
+		autoc_reg &= ~IXGBE_AUTOC_LMS_MASK;
+		autoc_reg |= hw->mac.link_attach_type;
+		autoc_reg |= hw->mac.link_mode_select;
+
+		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+		msec_delay(50);
+	}
+
+	/* Restart link */
+	autoc_reg |= IXGBE_AUTOC_AN_RESTART;
+	IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg);
+
+	/* Only poll for autoneg to complete if specified to do so */
+	if (hw->phy.autoneg_wait_to_complete) {
+		if (hw->mac.link_mode_select == IXGBE_AUTOC_LMS_KX4_AN ||
+		    hw->mac.link_mode_select == IXGBE_AUTOC_LMS_KX4_AN_1G_AN) {
+			links_reg = 0; /* Just in case Autoneg time = 0 */
+			for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) {
+				links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+				if (links_reg & IXGBE_LINKS_KX_AN_COMP)
+					break;
+				msec_delay(100);
+			}
+			if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) {
+				status = IXGBE_ERR_AUTONEG_NOT_COMPLETE;
+				DEBUGOUT("Autonegotiation did not complete.\n");
+			}
+		}
+	}
+
+	/* Add delay to filter out noises during initial link setup */
+	msec_delay(50);
+
+	return status;
+}
+
+/**
+ *  ixgbe_check_mac_link_82598 - Get link/speed status
+ *  @hw: pointer to hardware structure
+ *  @speed: pointer to link speed
+ *  @link_up: TRUE is link is up, FALSE otherwise
+ *
+ *  Reads the links register to determine if link is up and the current speed
+ **/
+s32 ixgbe_check_mac_link_82598(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+			       bool *link_up)
+{
+	u32 links_reg;
+
+	links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS);
+
+	if (links_reg & IXGBE_LINKS_UP)
+		*link_up = TRUE;
+	else
+		*link_up = FALSE;
+
+	if (links_reg & IXGBE_LINKS_SPEED)
+		*speed = IXGBE_LINK_SPEED_10GB_FULL;
+	else
+		*speed = IXGBE_LINK_SPEED_1GB_FULL;
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_setup_mac_link_speed_82598 - Set MAC link speed
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg: TRUE if auto-negotiation enabled
+ *  @autoneg_wait_to_complete: TRUE if waiting is needed to complete
+ *
+ *  Set the link speed in the AUTOC register and restarts link.
+ **/
+s32 ixgbe_setup_mac_link_speed_82598(struct ixgbe_hw *hw,
+				     ixgbe_link_speed speed, bool autoneg,
+				     bool autoneg_wait_to_complete)
+{
+	s32 status = IXGBE_SUCCESS;
+
+	/* If speed is 10G, then check for CX4 or XAUI. */
+	if ((speed == IXGBE_LINK_SPEED_10GB_FULL) &&
+	    (!(hw->mac.link_attach_type & IXGBE_AUTOC_10G_KX4)))
+		hw->mac.link_mode_select = IXGBE_AUTOC_LMS_10G_LINK_NO_AN;
+	else if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && (!autoneg))
+		hw->mac.link_mode_select = IXGBE_AUTOC_LMS_1G_LINK_NO_AN;
+	else if (autoneg) {
+		/* BX mode - Autonegotiate 1G */
+		if (!(hw->mac.link_attach_type & IXGBE_AUTOC_1G_PMA_PMD))
+			hw->mac.link_mode_select = IXGBE_AUTOC_LMS_1G_AN;
+		else /* KX/KX4 mode */
+			hw->mac.link_mode_select = IXGBE_AUTOC_LMS_KX4_AN_1G_AN;
+	} else {
+		status = IXGBE_ERR_LINK_SETUP;
+	}
+
+	if (status == IXGBE_SUCCESS) {
+		hw->phy.autoneg_wait_to_complete = autoneg_wait_to_complete;
+
+		hw->mac.link_settings_loaded = TRUE;
+		/*
+		 * Setup and restart the link based on the new values in
+		 * ixgbe_hw This will write the AUTOC register based on the new
+		 * stored values
+		 */
+		ixgbe_setup_mac_link_82598(hw);
+	}
+
+	return status;
+}
+
+
+/**
+ *  ixgbe_setup_copper_link_82598 - Setup copper link settings
+ *  @hw: pointer to hardware structure
+ *
+ *  Configures link settings based on values in the ixgbe_hw struct.
+ *  Restarts the link.  Performs autonegotiation if needed.  Restart
+ *  phy and wait for autonegotiate to finish.  Then synchronize the
+ *  MAC and PHY.
+ **/
+s32 ixgbe_setup_copper_link_82598(struct ixgbe_hw *hw)
+{
+	s32 status;
+	ixgbe_link_speed speed = 0;
+	bool link_up = FALSE;
+
+	/* Set up MAC */
+	ixgbe_setup_mac_link_82598(hw);
+
+	/* Restart autonegotiation on PHY */
+	status = ixgbe_setup_phy_link(hw);
+
+	/* Synchronize MAC to PHY speed */
+	if (status == IXGBE_SUCCESS)
+		status = ixgbe_check_link(hw, &speed, &link_up);
+
+	return status;
+}
+
+/**
+ *  ixgbe_check_copper_link_82598 - Syncs MAC & PHY link settings
+ *  @hw: pointer to hardware structure
+ *  @speed: pointer to link speed
+ *  @link_up: TRUE if link is up, FALSE otherwise
+ *
+ *  Reads the mac link, phy link, and synchronizes the MAC to PHY.
+ **/
+s32 ixgbe_check_copper_link_82598(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+				  bool *link_up)
+{
+	s32 status;
+	ixgbe_link_speed phy_speed = 0;
+	bool phy_link = FALSE;
+
+	/* This is the speed and link the MAC is set at */
+	ixgbe_check_mac_link_82598(hw, speed, link_up);
+
+	/*
+	 * Check current speed and link status of the PHY register.
+	 * This is a vendor specific register and may have to
+	 * be changed for other copper PHYs.
+	 */
+	status = ixgbe_check_phy_link(hw, &phy_speed, &phy_link);
+
+	if ((status == IXGBE_SUCCESS) && (phy_link)) {
+		/*
+		 * Check current link status of the MACs link's register
+		 * matches that of the speed in the PHY register
+		 */
+		if (*speed != phy_speed) {
+			/*
+			 * The copper PHY requires 82598 attach type to be XAUI
+			 * for 10G and BX for 1G
+			 */
+			hw->mac.link_attach_type =
+				(IXGBE_AUTOC_10G_XAUI | IXGBE_AUTOC_1G_BX);
+
+			/* Synchronize the MAC speed to the PHY speed */
+			status = ixgbe_setup_mac_link_speed_82598(hw, phy_speed,
+								  FALSE, FALSE);
+			if (status == IXGBE_SUCCESS)
+				ixgbe_check_mac_link_82598(hw, speed, link_up);
+			else
+				status = IXGBE_ERR_LINK_SETUP;
+		}
+	} else {
+		*link_up = phy_link;
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_setup_copper_link_speed_82598 - Set the PHY autoneg advertised field
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg: TRUE if autonegotiation enabled
+ *  @autoneg_wait_to_complete: TRUE if waiting is needed to complete
+ *
+ *  Sets the link speed in the AUTOC register in the MAC and restarts link.
+ **/
+s32 ixgbe_setup_copper_link_speed_82598(struct ixgbe_hw *hw,
+					ixgbe_link_speed speed,
+					bool autoneg,
+					bool autoneg_wait_to_complete)
+{
+	s32 status;
+	bool link_up = 0;
+
+	/* Setup the PHY according to input speed */
+	status = ixgbe_setup_phy_link_speed(hw, speed, autoneg,
+					    autoneg_wait_to_complete);
+
+	/* Synchronize MAC to PHY speed */
+	if (status == IXGBE_SUCCESS)
+		status = ixgbe_check_link(hw, &speed, &link_up);
+
+	return status;
+}
+
+#ifndef NO_82598_A0_SUPPORT
+/**
+ *  ixgbe_reset_hw_rev_0_82598 - Performs hardware reset
+ *  @hw: pointer to hardware structure
+ *
+ *  Resets the hardware by reseting the transmit and receive units, masks and
+ *  clears all interrupts, performing a PHY reset, and performing a link (MAC)
+ *  reset.
+ **/
+s32 ixgbe_reset_hw_rev_0_82598(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_SUCCESS;
+	u32 ctrl;
+	u32 gheccr;
+	u32 autoc;
+	u32 i;
+	u32 resets;
+
+	/* Call adapter stop to disable tx/rx and clear interrupts */
+	ixgbe_stop_adapter(hw);
+
+	/* Reset PHY */
+	ixgbe_reset_phy(hw);
+
+	for (resets = 0; resets < 10; resets++) {
+		/*
+		 * Prevent the PCI-E bus from from hanging by disabling PCI-E
+		 * master access and verify no pending requests before reset
+		 */
+		if (ixgbe_disable_pcie_master(hw) != IXGBE_SUCCESS) {
+			status = IXGBE_ERR_MASTER_REQUESTS_PENDING;
+			DEBUGOUT("PCI-E Master disable polling has failed.\n");
+		}
+
+		/*
+		 * Issue global reset to the MAC.  This needs to be a SW reset.
+		 * If link reset is used, it might reset the MAC when mng is
+		 * using it.
+		 */
+		ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+		IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST));
+		IXGBE_WRITE_FLUSH(hw);
+
+		/*
+		 * Poll for reset bit to self-clear indicating reset is
+		 * complete
+		 */
+		for (i = 0; i < 10; i++) {
+			usec_delay(1);
+			ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+			if (!(ctrl & IXGBE_CTRL_RST))
+				break;
+		}
+		if (ctrl & IXGBE_CTRL_RST) {
+			status = IXGBE_ERR_RESET_FAILED;
+			DEBUGOUT("Reset polling failed to complete.\n");
+		}
+	}
+
+	msec_delay(50);
+
+	gheccr = IXGBE_READ_REG(hw, IXGBE_GHECCR);
+	gheccr &= ~((1 << 21) | (1 << 18) | (1 << 9) | (1 << 6));
+	IXGBE_WRITE_REG(hw, IXGBE_GHECCR, gheccr);
+
+	/*
+	 * AUTOC register which stores link settings gets cleared
+	 * and reloaded from EEPROM after reset. We need to restore
+	 * our stored value from init in case SW changed the attach
+	 * type or speed.  If this is the first time and link settings
+	 * have not been stored, store default settings from AUTOC.
+	 */
+	autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	if (hw->mac.link_settings_loaded) {
+		autoc &= ~(IXGBE_AUTOC_LMS_ATTACH_TYPE);
+		autoc &= ~(IXGBE_AUTOC_LMS_MASK);
+		autoc |= hw->mac.link_attach_type;
+		autoc |= hw->mac.link_mode_select;
+		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
+	} else {
+		hw->mac.link_attach_type =
+					 (autoc & IXGBE_AUTOC_LMS_ATTACH_TYPE);
+		hw->mac.link_mode_select = (autoc & IXGBE_AUTOC_LMS_MASK);
+		hw->mac.link_settings_loaded = TRUE;
+	}
+
+	/* Store the permanent mac address */
+	ixgbe_get_mac_addr(hw, hw->mac.perm_addr);
+
+	return status;
+}
+
+#endif /* NO_A0_SUPPORT */
+/**
+ *  ixgbe_reset_hw_82598 - Performs hardware reset
+ *  @hw: pointer to hardware structure
+ *
+ *  Resets the hardware by reseting the transmit and receive units, masks and
+ *  clears all interrupts, performing a PHY reset, and performing a link (MAC)
+ *  reset.
+ **/
+s32 ixgbe_reset_hw_82598(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_SUCCESS;
+	u32 ctrl;
+	u32 gheccr;
+	u32 i;
+	u32 autoc;
+
+	/* Call adapter stop to disable tx/rx and clear interrupts */
+	ixgbe_stop_adapter(hw);
+
+	/* Reset PHY */
+	ixgbe_reset_phy(hw);
+
+	/*
+	 * Prevent the PCI-E bus from from hanging by disabling PCI-E master
+	 * access and verify no pending requests before reset
+	 */
+	if (ixgbe_disable_pcie_master(hw) != IXGBE_SUCCESS) {
+		status = IXGBE_ERR_MASTER_REQUESTS_PENDING;
+		DEBUGOUT("PCI-E Master disable polling has failed.\n");
+	}
+
+	/*
+	 * Issue global reset to the MAC.  This needs to be a SW reset.
+	 * If link reset is used, it might reset the MAC when mng is using it
+	 */
+	ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+	IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST));
+	IXGBE_WRITE_FLUSH(hw);
+
+	/* Poll for reset bit to self-clear indicating reset is complete */
+	for (i = 0; i < 10; i++) {
+		usec_delay(1);
+		ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+		if (!(ctrl & IXGBE_CTRL_RST))
+			break;
+	}
+	if (ctrl & IXGBE_CTRL_RST) {
+		status = IXGBE_ERR_RESET_FAILED;
+		DEBUGOUT("Reset polling failed to complete.\n");
+	}
+
+	msec_delay(50);
+
+	gheccr = IXGBE_READ_REG(hw, IXGBE_GHECCR);
+	gheccr &= ~((1 << 21) | (1 << 18) | (1 << 9) | (1 << 6));
+	IXGBE_WRITE_REG(hw, IXGBE_GHECCR, gheccr);
+
+	/*
+	 * AUTOC register which stores link settings gets cleared
+	 * and reloaded from EEPROM after reset. We need to restore
+	 * our stored value from init in case SW changed the attach
+	 * type or speed.  If this is the first time and link settings
+	 * have not been stored, store default settings from AUTOC.
+	 */
+	autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC);
+	if (hw->mac.link_settings_loaded) {
+		autoc &= ~(IXGBE_AUTOC_LMS_ATTACH_TYPE);
+		autoc &= ~(IXGBE_AUTOC_LMS_MASK);
+		autoc |= hw->mac.link_attach_type;
+		autoc |= hw->mac.link_mode_select;
+		IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc);
+	} else {
+		hw->mac.link_attach_type =
+					 (autoc & IXGBE_AUTOC_LMS_ATTACH_TYPE);
+		hw->mac.link_mode_select = (autoc & IXGBE_AUTOC_LMS_MASK);
+		hw->mac.link_settings_loaded = TRUE;
+	}
+
+	/* Store the permanent mac address */
+	ixgbe_get_mac_addr(hw, hw->mac.perm_addr);
+
+	return status;
+}
+
+/**
+ *  ixgbe_get_num_rx_addrs_82598 - Get RX address registers
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the of RAR entries for the given adapter.
+ **/
+u32 ixgbe_get_num_rx_addrs_82598(struct ixgbe_hw *hw)
+{
+	UNREFERENCED_PARAMETER(hw);
+
+	return IXGBE_82598_RAR_ENTRIES;
+}
+
diff --git a/sys/dev/ixgbe/ixgbe_api.c b/sys/dev/ixgbe/ixgbe_api.c
new file mode 100644
index 0000000..d881c3d
--- /dev/null
+++ b/sys/dev/ixgbe/ixgbe_api.c
@@ -0,0 +1,645 @@
+/*******************************************************************************
+
+  Copyright (c) 2001-2007, Intel Corporation 
+  All rights reserved.
+  
+  Redistribution and use in source and binary forms, with or without 
+  modification, are permitted provided that the following conditions are met:
+  
+   1. Redistributions of source code must retain the above copyright notice, 
+      this list of conditions and the following disclaimer.
+  
+   2. Redistributions in binary form must reproduce the above copyright 
+      notice, this list of conditions and the following disclaimer in the 
+      documentation and/or other materials provided with the distribution.
+  
+   3. Neither the name of the Intel Corporation nor the names of its 
+      contributors may be used to endorse or promote products derived from 
+      this software without specific prior written permission.
+  
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+  POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+/* $FreeBSD$ */
+
+#include "ixgbe_api.h"
+#include "ixgbe_common.h"
+
+extern s32 ixgbe_init_shared_code_82598(struct ixgbe_hw *hw);
+extern s32 ixgbe_init_shared_code_phy(struct ixgbe_hw *hw);
+
+/**
+ *  ixgbe_init_shared_code - Initialize the shared code
+ *  @hw: pointer to hardware structure
+ *
+ *  This will assign function pointers and assign the MAC type and PHY code.
+ *  Does not touch the hardware. This function must be called prior to any
+ *  other function in the shared code. The ixgbe_hw structure should be
+ *  memset to 0 prior to calling this function.  The following fields in
+ *  hw structure should be filled in prior to calling this function:
+ *  hw_addr, back, device_id, vendor_id, subsystem_device_id,
+ *   subsystem_vendor_id, and revision_id
+ **/
+s32 ixgbe_init_shared_code(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_ERR_DEVICE_NOT_SUPPORTED;
+
+	/*
+	 * Assign generic function pointers before entering adapter-specific
+	 * init
+	 */
+	ixgbe_assign_func_pointers_generic(hw);
+
+	if (hw->vendor_id == IXGBE_INTEL_VENDOR_ID) {
+		switch (hw->device_id) {
+		case IXGBE_DEV_ID_82598:
+		case IXGBE_DEV_ID_82598_FPGA:
+		case IXGBE_DEV_ID_82598AF_SINGLE_PORT:
+		case IXGBE_DEV_ID_82598AF_DUAL_PORT:
+		case IXGBE_DEV_ID_82598AT_DUAL_PORT:
+			status = ixgbe_init_shared_code_82598(hw);
+			status = ixgbe_init_shared_code_phy(hw);
+			break;
+		default:
+			status = IXGBE_ERR_DEVICE_NOT_SUPPORTED;
+			break;
+		}
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_init_hw - Initialize the hardware
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize the hardware by resetting and then starting the hardware
+ **/
+s32 ixgbe_init_hw(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, ixgbe_func_init_hw, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_reset_hw - Performs a hardware reset
+ *  @hw: pointer to hardware structure
+ *
+ *  Resets the hardware by resetting the transmit and receive units, masks and
+ *  clears all interrupts, performs a PHY reset, and performs a MAC reset
+ **/
+s32 ixgbe_reset_hw(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, ixgbe_func_reset_hw, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_start_hw - Prepares hardware for TX/TX
+ *  @hw: pointer to hardware structure
+ *
+ *  Starts the hardware by filling the bus info structure and media type,
+ *  clears all on chip counters, initializes receive address registers,
+ *  multicast table, VLAN filter table, calls routine to setup link and
+ *  flow control settings, and leaves transmit and receive units disabled
+ *  and uninitialized.
+ **/
+s32 ixgbe_start_hw(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, ixgbe_func_start_hw, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_clear_hw_cntrs - Clear hardware counters
+ *  @hw: pointer to hardware structure
+ *
+ *  Clears all hardware statistics counters by reading them from the hardware
+ *  Statistics counters are clear on read.
+ **/
+s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, ixgbe_func_clear_hw_cntrs, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_get_media_type - Get media type
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the media type (fiber, copper, backplane)
+ **/
+enum ixgbe_media_type ixgbe_get_media_type(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, ixgbe_func_get_media_type, (hw),
+			       ixgbe_media_type_unknown);
+}
+
+/**
+ *  ixgbe_get_mac_addr - Get MAC address
+ *  @hw: pointer to hardware structure
+ *  @mac_addr: Adapter MAC address
+ *
+ *  Reads the adapter's MAC address from the first Receive Address Register
+ *  (RAR0) A reset of the adapter must have been performed prior to calling this
+ *  function in order for the MAC address to have been loaded from the EEPROM
+ *  into RAR0
+ **/
+s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr)
+{
+	return ixgbe_call_func(hw, ixgbe_func_get_mac_addr,
+			       (hw, mac_addr), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_get_bus_info - Set PCI bus info
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure
+ **/
+s32 ixgbe_get_bus_info(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, ixgbe_func_get_bus_info, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_get_num_of_tx_queues - Get TX queues
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the number of transmit queues for the given adapter.
+ **/
+u32 ixgbe_get_num_of_tx_queues(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, ixgbe_func_get_num_of_tx_queues,
+			       (hw), 0);
+}
+
+/**
+ *  ixgbe_get_num_of_rx_queues - Get RX queues
+ *  @hw: pointer to hardware structure
+ *
+ *  Returns the number of receive queues for the given adapter.
+ **/
+u32 ixgbe_get_num_of_rx_queues(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, ixgbe_func_get_num_of_rx_queues,
+			       (hw), 0);
+}
+
+/**
+ *  ixgbe_stop_adapter - Disable TX/TX units
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
+ *  disables transmit and receive units. The adapter_stopped flag is used by
+ *  the shared code and drivers to determine if the adapter is in a stopped
+ *  state and should not touch the hardware.
+ **/
+s32 ixgbe_stop_adapter(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, ixgbe_func_stop_adapter, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_identify_phy - Get PHY type
+ *  @hw: pointer to hardware structure
+ *
+ *  Determines the physical layer module found on the current adapter.
+ **/
+s32 ixgbe_identify_phy(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_SUCCESS;
+
+	if (hw->phy.type == ixgbe_phy_unknown) {
+		status = ixgbe_call_func(hw,
+					 ixgbe_func_identify_phy,
+					 (hw),
+					 IXGBE_NOT_IMPLEMENTED);
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_reset_phy - Perform a PHY reset
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reset_phy(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_SUCCESS;
+
+	if (hw->phy.type == ixgbe_phy_unknown) {
+		if (ixgbe_identify_phy(hw) != IXGBE_SUCCESS) {
+		    status = IXGBE_ERR_PHY;
+		}
+	}
+
+	if (status == IXGBE_SUCCESS) {
+		status = ixgbe_call_func(hw,
+					 ixgbe_func_reset_phy,
+					 (hw),
+					 IXGBE_NOT_IMPLEMENTED);
+	}
+	return status;
+}
+
+/**
+ *  ixgbe_read_phy_reg - Read PHY register
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit address of PHY register to read
+ *  @phy_data: Pointer to read data from PHY register
+ *
+ *  Reads a value from a specified PHY register
+ **/
+s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
+		       u16 *phy_data)
+{
+	s32 status = IXGBE_SUCCESS;
+
+	if (hw->phy.type == ixgbe_phy_unknown) {
+		if (ixgbe_identify_phy(hw) != IXGBE_SUCCESS) {
+		    status = IXGBE_ERR_PHY;
+		}
+	}
+
+	if (status == IXGBE_SUCCESS) {
+		status = ixgbe_call_func(hw,
+					 ixgbe_func_read_phy_reg,
+					 (hw, reg_addr, device_type, phy_data),
+					 IXGBE_NOT_IMPLEMENTED);
+	}
+	return status;
+}
+
+/**
+ *  ixgbe_write_phy_reg - Write PHY register
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit PHY register to write
+ *  @phy_data: Data to write to the PHY register
+ *
+ *  Writes a value to specified PHY register
+ **/
+s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
+			u16 phy_data)
+{
+	s32 status = IXGBE_SUCCESS;
+
+	if (hw->phy.type == ixgbe_phy_unknown) {
+		if (ixgbe_identify_phy(hw) != IXGBE_SUCCESS) {
+		    status = IXGBE_ERR_PHY;
+		}
+	}
+
+	if (status == IXGBE_SUCCESS) {
+		status = ixgbe_call_func(hw,
+					 ixgbe_func_write_phy_reg,
+					 (hw, reg_addr, device_type, phy_data),
+					 IXGBE_NOT_IMPLEMENTED);
+	}
+	return status;
+}
+
+/**
+ *  ixgbe_setup_link - Configure link settings
+ *  @hw: pointer to hardware structure
+ *
+ *  Configures link settings based on values in the ixgbe_hw struct.
+ *  Restarts the link.  Performs autonegotiation if needed.
+ **/
+s32 ixgbe_setup_link(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, ixgbe_func_setup_link, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_check_link - Get link and speed status
+ *  @hw: pointer to hardware structure
+ *
+ *  Reads the links register to determine if link is up and the current speed
+ **/
+s32 ixgbe_check_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+		     bool *link_up)
+{
+	return ixgbe_call_func(hw, ixgbe_func_check_link, (hw, speed, link_up),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_setup_link_speed - Set link speed
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg: TRUE if autonegotiation enabled
+ *
+ *  Set the link speed and restarts the link.
+ **/
+s32 ixgbe_setup_link_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+			   bool autoneg,
+			   bool autoneg_wait_to_complete)
+{
+	return ixgbe_call_func(hw, ixgbe_func_setup_link_speed, (hw, speed,
+			       autoneg, autoneg_wait_to_complete),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_get_link_settings - Set link settings to default
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets the default link settings based on attach type in the hw struct.
+ **/
+s32 ixgbe_get_link_settings(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+			    bool *autoneg)
+{
+	return ixgbe_call_func(hw, ixgbe_func_get_link_settings, (hw, speed,
+			       autoneg), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_led_on - Turn on LED's
+ *  @hw: pointer to hardware structure
+ *  @index: led number to turn on
+ *
+ *  Turns on the software controllable LEDs.
+ **/
+s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index)
+{
+	return ixgbe_call_func(hw, ixgbe_func_led_on, (hw, index),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_led_off - Turn off LED's
+ *  @hw: pointer to hardware structure
+ *  @index: led number to turn off
+ *
+ *  Turns off the software controllable LEDs.
+ **/
+s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index)
+{
+	return ixgbe_call_func(hw, ixgbe_func_led_off, (hw, index),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_blink_led_start - Blink LED's
+ *  @hw: pointer to hardware structure
+ *  @index: led number to blink
+ *
+ *  Blink LED based on index.
+ **/
+s32 ixgbe_blink_led_start(struct ixgbe_hw *hw, u32 index)
+{
+	return ixgbe_call_func(hw, ixgbe_func_blink_led_start, (hw, index),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_blink_led_stop - Stop blinking LED's
+ *  @hw: pointer to hardware structure
+ *
+ *  Stop blinking LED based on index.
+ **/
+s32 ixgbe_blink_led_stop(struct ixgbe_hw *hw, u32 index)
+{
+	return ixgbe_call_func(hw, ixgbe_func_blink_led_stop, (hw, index),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_init_eeprom_params - Initialiaze EEPROM parameters
+ *  @hw: pointer to hardware structure
+ *
+ *  Initializes the EEPROM parameters ixgbe_eeprom_info within the
+ *  ixgbe_hw struct in order to set up EEPROM access.
+ **/
+s32 ixgbe_init_eeprom_params(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, ixgbe_func_init_eeprom_params, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+
+/**
+ *  ixgbe_write_eeprom - Write word to EEPROM
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be written to
+ *  @data: 16 bit word to be written to the EEPROM
+ *
+ *  Writes 16 bit value to EEPROM. If ixgbe_eeprom_update_checksum is not
+ *  called after this function, the EEPROM will most likely contain an
+ *  invalid checksum.
+ **/
+s32 ixgbe_write_eeprom(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+	s32 status;
+
+	/*
+	 * Initialize EEPROM parameters.  This will not do anything if the
+	 * EEPROM structure has already been initialized
+	 */
+	ixgbe_init_eeprom_params(hw);
+
+	/* Check for invalid offset */
+	if (offset >= hw->eeprom.word_size) {
+		status = IXGBE_ERR_EEPROM;
+	} else {
+		status = ixgbe_call_func(hw,
+					 ixgbe_func_write_eeprom,
+					 (hw, offset, data),
+					 IXGBE_NOT_IMPLEMENTED);
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_read_eeprom - Read word from EEPROM
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be read
+ *  @data: read 16 bit value from EEPROM
+ *
+ *  Reads 16 bit value from EEPROM
+ **/
+s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data)
+{
+	s32 status;
+
+	/*
+	 * Initialize EEPROM parameters.  This will not do anything if the
+	 * EEPROM structure has already been initialized
+	 */
+	ixgbe_init_eeprom_params(hw);
+
+	/* Check for invalid offset */
+	if (offset >= hw->eeprom.word_size) {
+		status = IXGBE_ERR_EEPROM;
+	} else {
+		status = ixgbe_call_func(hw,
+					 ixgbe_func_read_eeprom,
+					 (hw, offset, data),
+					 IXGBE_NOT_IMPLEMENTED);
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_validate_eeprom_checksum - Validate EEPROM checksum
+ *  @hw: pointer to hardware structure
+ *  @checksum_val: calculated checksum
+ *
+ *  Performs checksum calculation and validates the EEPROM checksum
+ **/
+s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val)
+{
+	return ixgbe_call_func(hw, ixgbe_func_validate_eeprom_checksum,
+			       (hw, checksum_val), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_eeprom_update_checksum - Updates the EEPROM checksum
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_update_eeprom_checksum(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, ixgbe_func_update_eeprom_checksum, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_set_rar - Set RX address register
+ *  @hw: pointer to hardware structure
+ *  @addr: Address to put into receive address register
+ *  @index: Receive address register to write
+ *  @vind: Vind to set RAR to
+ *  @enable_addr: set flag that address is active
+ *
+ *  Puts an ethernet address into a receive address register.
+ **/
+s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vind,
+		  u32 enable_addr)
+{
+	return ixgbe_call_func(hw, ixgbe_func_set_rar, (hw, index, addr, vind,
+			       enable_addr), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_init_rx_addrs - Initializes receive address filters.
+ *  @hw: pointer to hardware structure
+ *
+ *  Places the MAC address in receive address register 0 and clears the rest
+ *  of the receive addresss registers. Clears the multicast table. Assumes
+ *  the receiver is in reset when the routine is called.
+ **/
+s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, ixgbe_func_init_rx_addrs, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_get_num_rx_addrs - Returns the number of RAR entries.
+ *  @hw: pointer to hardware structure
+ **/
+u32 ixgbe_get_num_rx_addrs(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, ixgbe_func_get_num_rx_addrs, (hw), 0);
+}
+
+/**
+ *  ixgbe_update_mc_addr_list - Updates the MAC's list of multicast addresses
+ *  @hw: pointer to hardware structure
+ *  @mc_addr_list: the list of new multicast addresses
+ *  @mc_addr_count: number of addresses
+ *  @pad: number of bytes between addresses in the list
+ *
+ *  The given list replaces any existing list. Clears the MC addrs from receive
+ *  address registers and the multicast table. Uses unsed receive address
+ *  registers for the first multicast addresses, and hashes the rest into the
+ *  multicast table.
+ **/
+s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list,
+			      u32 mc_addr_count, u32 pad)
+{
+	return ixgbe_call_func(hw, ixgbe_func_update_mc_addr_list, (hw,
+			       mc_addr_list, mc_addr_count,  pad),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_enable_mc - Enable multicast address in RAR
+ *  @hw: pointer to hardware structure
+ *
+ *  Enables multicast address in RAR and the use of the multicast hash table.
+ **/
+s32 ixgbe_enable_mc(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, ixgbe_func_enable_mc, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_disable_mc - Disable multicast address in RAR
+ *  @hw: pointer to hardware structure
+ *
+ *  Disables multicast address in RAR and the use of the multicast hash table.
+ **/
+s32 ixgbe_disable_mc(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, ixgbe_func_disable_mc, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_clear_vfta - Clear VLAN filter table
+ *  @hw: pointer to hardware structure
+ *
+ *  Clears the VLAN filer table, and the VMDq index associated with the filter
+ **/
+s32 ixgbe_clear_vfta(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, ixgbe_func_clear_vfta, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_set_vfta - Set VLAN filter table
+ *  @hw: pointer to hardware structure
+ *  @vlan: VLAN id to write to VLAN filter
+ *  @vind: VMDq output index that maps queue to VLAN id in VFTA
+ *  @vlan_on: boolean flag to turn on/off VLAN in VFTA
+ *
+ *  Turn on/off specified VLAN in the VLAN filter table.
+ **/
+s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan, u32 vind, bool vlan_on)
+{
+	return ixgbe_call_func(hw, ixgbe_func_set_vfta, (hw, vlan, vind,
+			       vlan_on), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_setup_fc - Set flow control
+ *  @hw: pointer to hardware structure
+ *  @packetbuf_num: packet buffer number (0-7)
+ *
+ *  Configures the flow control settings based on SW configuration.
+ **/
+s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num)
+{
+	return ixgbe_call_func(hw, ixgbe_func_setup_fc, (hw, packetbuf_num),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
diff --git a/sys/dev/ixgbe/ixgbe_api.h b/sys/dev/ixgbe/ixgbe_api.h
new file mode 100644
index 0000000..691957f
--- /dev/null
+++ b/sys/dev/ixgbe/ixgbe_api.h
@@ -0,0 +1,94 @@
+/*******************************************************************************
+
+  Copyright (c) 2001-2007, Intel Corporation 
+  All rights reserved.
+  
+  Redistribution and use in source and binary forms, with or without 
+  modification, are permitted provided that the following conditions are met:
+  
+   1. Redistributions of source code must retain the above copyright notice, 
+      this list of conditions and the following disclaimer.
+  
+   2. Redistributions in binary form must reproduce the above copyright 
+      notice, this list of conditions and the following disclaimer in the 
+      documentation and/or other materials provided with the distribution.
+  
+   3. Neither the name of the Intel Corporation nor the names of its 
+      contributors may be used to endorse or promote products derived from 
+      this software without specific prior written permission.
+  
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+  POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+/* $FreeBSD$ */
+
+#ifndef _IXGBE_API_H_
+#define _IXGBE_API_H_
+
+#include "ixgbe_type.h"
+
+s32 ixgbe_init_shared_code(struct ixgbe_hw *hw);
+
+s32 ixgbe_init_hw(struct ixgbe_hw *hw);
+s32 ixgbe_reset_hw(struct ixgbe_hw *hw);
+s32 ixgbe_start_hw(struct ixgbe_hw *hw);
+s32 ixgbe_clear_hw_cntrs(struct ixgbe_hw *hw);
+enum ixgbe_media_type ixgbe_get_media_type(struct ixgbe_hw *hw);
+s32 ixgbe_get_mac_addr(struct ixgbe_hw *hw, u8 *mac_addr);
+s32 ixgbe_get_bus_info(struct ixgbe_hw *hw);
+u32 ixgbe_get_num_of_tx_queues(struct ixgbe_hw *hw);
+u32 ixgbe_get_num_of_rx_queues(struct ixgbe_hw *hw);
+s32 ixgbe_stop_adapter(struct ixgbe_hw *hw);
+
+s32 ixgbe_identify_phy(struct ixgbe_hw *hw);
+s32 ixgbe_reset_phy(struct ixgbe_hw *hw);
+s32 ixgbe_read_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
+		       u16 *phy_data);
+s32 ixgbe_write_phy_reg(struct ixgbe_hw *hw, u32 reg_addr, u32 device_type,
+			u16 phy_data);
+
+s32 ixgbe_setup_link(struct ixgbe_hw *hw);
+s32 ixgbe_setup_link_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+			   bool autoneg, bool autoneg_wait_to_complete);
+s32 ixgbe_check_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+		     bool *link_up);
+s32 ixgbe_get_link_settings(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+			    bool *autoneg);
+s32 ixgbe_led_on(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_led_off(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_blink_led_start(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_blink_led_stop(struct ixgbe_hw *hw, u32 index);
+
+s32 ixgbe_init_eeprom_params(struct ixgbe_hw *hw);
+s32 ixgbe_write_eeprom(struct ixgbe_hw *hw, u16 offset, u16 data);
+s32 ixgbe_read_eeprom(struct ixgbe_hw *hw, u16 offset, u16 *data);
+s32 ixgbe_validate_eeprom_checksum(struct ixgbe_hw *hw, u16 *checksum_val);
+s32 ixgbe_update_eeprom_checksum(struct ixgbe_hw *hw);
+
+s32 ixgbe_set_rar(struct ixgbe_hw *hw, u32 index, u8 *addr,
+		      u32 vind, u32 enable_addr);
+s32 ixgbe_init_rx_addrs(struct ixgbe_hw *hw);
+u32 ixgbe_get_num_rx_addrs(struct ixgbe_hw *hw);
+s32 ixgbe_update_mc_addr_list(struct ixgbe_hw *hw, u8 *mc_addr_list,
+				  u32 mc_addr_count, u32 pad);
+s32 ixgbe_enable_mc(struct ixgbe_hw *hw);
+s32 ixgbe_disable_mc(struct ixgbe_hw *hw);
+s32 ixgbe_clear_vfta(struct ixgbe_hw *hw);
+s32 ixgbe_set_vfta(struct ixgbe_hw *hw, u32 vlan,
+		   u32 vind, bool vlan_on);
+
+s32 ixgbe_setup_fc(struct ixgbe_hw *hw, s32 packetbuf_num);
+
+void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr);
+
+#endif /* _IXGBE_API_H_ */
diff --git a/sys/dev/ixgbe/ixgbe_common.c b/sys/dev/ixgbe/ixgbe_common.c
new file mode 100644
index 0000000..30a2625
--- /dev/null
+++ b/sys/dev/ixgbe/ixgbe_common.c
@@ -0,0 +1,1735 @@
+/*******************************************************************************
+
+  Copyright (c) 2001-2007, Intel Corporation 
+  All rights reserved.
+  
+  Redistribution and use in source and binary forms, with or without 
+  modification, are permitted provided that the following conditions are met:
+  
+   1. Redistributions of source code must retain the above copyright notice, 
+      this list of conditions and the following disclaimer.
+  
+   2. Redistributions in binary form must reproduce the above copyright 
+      notice, this list of conditions and the following disclaimer in the 
+      documentation and/or other materials provided with the distribution.
+  
+   3. Neither the name of the Intel Corporation nor the names of its 
+      contributors may be used to endorse or promote products derived from 
+      this software without specific prior written permission.
+  
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+  POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+/* $FreeBSD$ */
+
+#include "ixgbe_common.h"
+#include "ixgbe_api.h"
+
+static s32 ixgbe_poll_eeprom_eerd_done(struct ixgbe_hw *hw);
+static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw);
+static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw);
+static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw);
+static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw);
+static void ixgbe_standby_eeprom(struct ixgbe_hw *hw);
+static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data,
+					u16 count);
+static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count);
+static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec);
+static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec);
+static void ixgbe_release_eeprom(struct ixgbe_hw *hw);
+static u16 ixgbe_calc_eeprom_checksum(struct ixgbe_hw *hw);
+
+static void ixgbe_enable_rar(struct ixgbe_hw *hw, u32 index);
+static void ixgbe_disable_rar(struct ixgbe_hw *hw, u32 index);
+static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr);
+void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr);
+
+/**
+ *  ixgbe_assign_func_pointers_generic - Set generic func ptrs
+ *  @hw: pointer to hardware structure
+ *
+ *  Assigns generic function pointers.  Adapter-specific functions can
+ *  override the assignment of generic function pointers by assigning
+ *  their own adapter-specific function pointers.
+ **/
+s32 ixgbe_assign_func_pointers_generic(struct ixgbe_hw *hw)
+{
+	struct ixgbe_functions *f = &hw->func;
+
+	f->ixgbe_func_init_hw = &ixgbe_init_hw_generic;
+	f->ixgbe_func_start_hw = &ixgbe_start_hw_generic;
+	f->ixgbe_func_clear_hw_cntrs = &ixgbe_clear_hw_cntrs_generic;
+	f->ixgbe_func_get_mac_addr = &ixgbe_get_mac_addr_generic;
+	f->ixgbe_func_stop_adapter = &ixgbe_stop_adapter_generic;
+	f->ixgbe_func_get_bus_info = &ixgbe_get_bus_info_generic;
+	/* LED */
+	f->ixgbe_func_led_on = &ixgbe_led_on_generic;
+	f->ixgbe_func_led_off = &ixgbe_led_off_generic;
+	/* EEPROM */
+	f->ixgbe_func_init_eeprom_params = &ixgbe_init_eeprom_params_generic;
+	f->ixgbe_func_read_eeprom = &ixgbe_read_eeprom_bit_bang_generic;
+	f->ixgbe_func_write_eeprom = &ixgbe_write_eeprom_generic;
+	f->ixgbe_func_validate_eeprom_checksum =
+			       &ixgbe_validate_eeprom_checksum_generic;
+	f->ixgbe_func_update_eeprom_checksum =
+			       &ixgbe_update_eeprom_checksum_generic;
+	/* RAR, Multicast, VLAN */
+	f->ixgbe_func_set_rar = &ixgbe_set_rar_generic;
+	f->ixgbe_func_init_rx_addrs = &ixgbe_init_rx_addrs_generic;
+	f->ixgbe_func_update_mc_addr_list = &ixgbe_update_mc_addr_list_generic;
+	f->ixgbe_func_enable_mc = &ixgbe_enable_mc_generic;
+	f->ixgbe_func_disable_mc = &ixgbe_disable_mc_generic;
+	f->ixgbe_func_clear_vfta = &ixgbe_clear_vfta_generic;
+	f->ixgbe_func_set_vfta = &ixgbe_set_vfta_generic;
+	f->ixgbe_func_setup_fc = &ixgbe_setup_fc_generic;
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_start_hw_generic - Prepare hardware for TX/RX
+ *  @hw: pointer to hardware structure
+ *
+ *  Starts the hardware by filling the bus info structure and media type, clears
+ *  all on chip counters, initializes receive address registers, multicast
+ *  table, VLAN filter table, calls routine to set up link and flow control
+ *  settings, and leaves transmit and receive units disabled and uninitialized
+ **/
+s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw)
+{
+	u32 ctrl_ext;
+
+	/* Set the media type */
+	hw->phy.media_type = ixgbe_get_media_type(hw);
+
+	/* Set bus info */
+	ixgbe_get_bus_info(hw);
+
+	/* Identify the PHY */
+	ixgbe_identify_phy(hw);
+
+	/*
+	 * Store MAC address from RAR0, clear receive address registers, and
+	 * clear the multicast table
+	 */
+	ixgbe_init_rx_addrs(hw);
+
+	/* Clear the VLAN filter table */
+	ixgbe_clear_vfta(hw);
+
+	/* Set up link */
+	ixgbe_setup_link(hw);
+
+	/* Clear statistics registers */
+	ixgbe_clear_hw_cntrs(hw);
+
+	/* Set up flow control */
+	ixgbe_setup_fc(hw, 0);
+
+	/* Set No Snoop Disable */
+	ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
+	ctrl_ext |= IXGBE_CTRL_EXT_NS_DIS;
+	IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
+
+	/* Clear adapter stopped flag */
+	hw->adapter_stopped = FALSE;
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_init_hw_generic - Generic hardware initialization
+ *  @hw: pointer to hardware structure
+ *
+ *  Initialize the hardware by reseting the hardware, filling the bus info
+ *  structure and media type, clears all on chip counters, initializes receive
+ *  address registers, multicast table, VLAN filter table, calls routine to set
+ *  up link and flow control settings, and leaves transmit and receive units
+ *  disabled and uninitialized
+ **/
+s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw)
+{
+	/* Reset the hardware */
+	ixgbe_reset_hw(hw);
+
+	/* Start the HW */
+	ixgbe_start_hw(hw);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_clear_hw_cntrs_generic - Generic clear hardware counters
+ *  @hw: pointer to hardware structure
+ *
+ *  Clears all hardware statistics counters by reading them from the hardware
+ *  Statistics counters are clear on read.
+ **/
+s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw)
+{
+	u16 i = 0;
+
+	IXGBE_READ_REG(hw, IXGBE_CRCERRS);
+	IXGBE_READ_REG(hw, IXGBE_ILLERRC);
+	IXGBE_READ_REG(hw, IXGBE_ERRBC);
+	IXGBE_READ_REG(hw, IXGBE_MSPDC);
+	for (i = 0; i < 8; i++)
+		IXGBE_READ_REG(hw, IXGBE_MPC(i));
+
+	IXGBE_READ_REG(hw, IXGBE_MLFC);
+	IXGBE_READ_REG(hw, IXGBE_MRFC);
+	IXGBE_READ_REG(hw, IXGBE_RLEC);
+	IXGBE_READ_REG(hw, IXGBE_LXONTXC);
+	IXGBE_READ_REG(hw, IXGBE_LXONRXC);
+	IXGBE_READ_REG(hw, IXGBE_LXOFFTXC);
+	IXGBE_READ_REG(hw, IXGBE_LXOFFRXC);
+
+	for (i = 0; i < 8; i++) {
+		IXGBE_READ_REG(hw, IXGBE_PXONTXC(i));
+		IXGBE_READ_REG(hw, IXGBE_PXONRXC(i));
+		IXGBE_READ_REG(hw, IXGBE_PXOFFTXC(i));
+		IXGBE_READ_REG(hw, IXGBE_PXOFFRXC(i));
+	}
+
+	IXGBE_READ_REG(hw, IXGBE_PRC64);
+	IXGBE_READ_REG(hw, IXGBE_PRC127);
+	IXGBE_READ_REG(hw, IXGBE_PRC255);
+	IXGBE_READ_REG(hw, IXGBE_PRC511);
+	IXGBE_READ_REG(hw, IXGBE_PRC1023);
+	IXGBE_READ_REG(hw, IXGBE_PRC1522);
+	IXGBE_READ_REG(hw, IXGBE_GPRC);
+	IXGBE_READ_REG(hw, IXGBE_BPRC);
+	IXGBE_READ_REG(hw, IXGBE_MPRC);
+	IXGBE_READ_REG(hw, IXGBE_GPTC);
+	IXGBE_READ_REG(hw, IXGBE_GORCL);
+	IXGBE_READ_REG(hw, IXGBE_GORCH);
+	IXGBE_READ_REG(hw, IXGBE_GOTCL);
+	IXGBE_READ_REG(hw, IXGBE_GOTCH);
+	for (i = 0; i < 8; i++)
+		IXGBE_READ_REG(hw, IXGBE_RNBC(i));
+	IXGBE_READ_REG(hw, IXGBE_RUC);
+	IXGBE_READ_REG(hw, IXGBE_RFC);
+	IXGBE_READ_REG(hw, IXGBE_ROC);
+	IXGBE_READ_REG(hw, IXGBE_RJC);
+	IXGBE_READ_REG(hw, IXGBE_MNGPRC);
+	IXGBE_READ_REG(hw, IXGBE_MNGPDC);
+	IXGBE_READ_REG(hw, IXGBE_MNGPTC);
+	IXGBE_READ_REG(hw, IXGBE_TORL);
+	IXGBE_READ_REG(hw, IXGBE_TORH);
+	IXGBE_READ_REG(hw, IXGBE_TPR);
+	IXGBE_READ_REG(hw, IXGBE_TPT);
+	IXGBE_READ_REG(hw, IXGBE_PTC64);
+	IXGBE_READ_REG(hw, IXGBE_PTC127);
+	IXGBE_READ_REG(hw, IXGBE_PTC255);
+	IXGBE_READ_REG(hw, IXGBE_PTC511);
+	IXGBE_READ_REG(hw, IXGBE_PTC1023);
+	IXGBE_READ_REG(hw, IXGBE_PTC1522);
+	IXGBE_READ_REG(hw, IXGBE_MPTC);
+	IXGBE_READ_REG(hw, IXGBE_BPTC);
+	for (i = 0; i < 16; i++) {
+		IXGBE_READ_REG(hw, IXGBE_QPRC(i));
+		IXGBE_READ_REG(hw, IXGBE_QBRC(i));
+		IXGBE_READ_REG(hw, IXGBE_QPTC(i));
+		IXGBE_READ_REG(hw, IXGBE_QBTC(i));
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_get_mac_addr_generic - Generic get MAC address
+ *  @hw: pointer to hardware structure
+ *  @mac_addr: Adapter MAC address
+ *
+ *  Reads the adapter's MAC address from first Receive Address Register (RAR0)
+ *  A reset of the adapter must be performed prior to calling this function
+ *  in order for the MAC address to have been loaded from the EEPROM into RAR0
+ **/
+s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr)
+{
+	u32 rar_high;
+	u32 rar_low;
+	u16 i;
+
+	rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(0));
+	rar_low = IXGBE_READ_REG(hw, IXGBE_RAL(0));
+
+	for (i = 0; i < 4; i++)
+		mac_addr[i] = (u8)(rar_low >> (i*8));
+
+	for (i = 0; i < 2; i++)
+		mac_addr[i+4] = (u8)(rar_high >> (i*8));
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_get_bus_info_generic - Generic set PCI bus info
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets the PCI bus info (speed, width, type) within the ixgbe_hw structure
+ **/
+s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw)
+{
+	u16 link_status;
+
+	hw->bus.type = ixgbe_bus_type_pci_express;
+
+	/* Get the negotiated link width and speed from PCI config space */
+	link_status = IXGBE_READ_PCIE_WORD(hw, IXGBE_PCI_LINK_STATUS);
+
+	switch (link_status & IXGBE_PCI_LINK_WIDTH) {
+	case IXGBE_PCI_LINK_WIDTH_1:
+		hw->bus.width = ixgbe_bus_width_pcie_x1;
+		break;
+	case IXGBE_PCI_LINK_WIDTH_2:
+		hw->bus.width = ixgbe_bus_width_pcie_x2;
+		break;
+	case IXGBE_PCI_LINK_WIDTH_4:
+		hw->bus.width = ixgbe_bus_width_pcie_x4;
+		break;
+	case IXGBE_PCI_LINK_WIDTH_8:
+		hw->bus.width = ixgbe_bus_width_pcie_x8;
+		break;
+	default:
+		hw->bus.width = ixgbe_bus_width_unknown;
+		break;
+	}
+
+	switch (link_status & IXGBE_PCI_LINK_SPEED) {
+	case IXGBE_PCI_LINK_SPEED_2500:
+		hw->bus.speed = ixgbe_bus_speed_2500;
+		break;
+	case IXGBE_PCI_LINK_SPEED_5000:
+		hw->bus.speed = ixgbe_bus_speed_5000;
+		break;
+	default:
+		hw->bus.speed = ixgbe_bus_speed_unknown;
+		break;
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_stop_adapter_generic - Generic stop TX/RX units
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets the adapter_stopped flag within ixgbe_hw struct. Clears interrupts,
+ *  disables transmit and receive units. The adapter_stopped flag is used by
+ *  the shared code and drivers to determine if the adapter is in a stopped
+ *  state and should not touch the hardware.
+ **/
+s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw)
+{
+	u32 number_of_queues;
+	u32 reg_val;
+	u16 i;
+
+	/*
+	 * Set the adapter_stopped flag so other driver functions stop touching
+	 * the hardware
+	 */
+	hw->adapter_stopped = TRUE;
+
+	/* Disable the receive unit */
+	reg_val = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
+	reg_val &= ~(IXGBE_RXCTRL_RXEN);
+	IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, reg_val);
+	msec_delay(2);
+
+	/* Clear interrupt mask to stop from interrupts being generated */
+	IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_IRQ_CLEAR_MASK);
+
+	/* Clear any pending interrupts */
+	IXGBE_READ_REG(hw, IXGBE_EICR);
+
+	/* Disable the transmit unit.  Each queue must be disabled. */
+	number_of_queues = ixgbe_get_num_of_tx_queues(hw);
+	for (i = 0; i < number_of_queues; i++) {
+		reg_val = IXGBE_READ_REG(hw, IXGBE_TXDCTL(i));
+		if (reg_val & IXGBE_TXDCTL_ENABLE) {
+			reg_val &= ~IXGBE_TXDCTL_ENABLE;
+			IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(i), reg_val);
+		}
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_led_on_generic - Turns on the software controllable LEDs.
+ *  @hw: pointer to hardware structure
+ *  @index: led number to turn on
+ **/
+s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index)
+{
+	u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+	/* To turn on the LED, set mode to ON. */
+	led_reg &= ~IXGBE_LED_MODE_MASK(index);
+	led_reg |= IXGBE_LED_ON << IXGBE_LED_MODE_SHIFT(index);
+	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_led_off_generic - Turns off the software controllable LEDs.
+ *  @hw: pointer to hardware structure
+ *  @index: led number to turn off
+ **/
+s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index)
+{
+	u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+	/* To turn off the LED, set mode to OFF. */
+	led_reg &= ~IXGBE_LED_MODE_MASK(index);
+	led_reg |= IXGBE_LED_OFF << IXGBE_LED_MODE_SHIFT(index);
+	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+
+	return IXGBE_SUCCESS;
+}
+
+
+/**
+ *  ixgbe_blink_led_start_generic - Blink LED based on index.
+ *  @hw: pointer to hardware structure
+ *  @index: led number to blink
+ **/
+s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index)
+{
+	u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+	led_reg |= IXGBE_LED_BLINK(index);
+	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_blink_led_stop_generic - Stop blinking LED based on index.
+ *  @hw: pointer to hardware structure
+ *  @index: led number to stop blinking
+ **/
+s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index)
+{
+	u32 led_reg = IXGBE_READ_REG(hw, IXGBE_LEDCTL);
+
+	led_reg &= ~IXGBE_LED_BLINK(index);
+	IXGBE_WRITE_REG(hw, IXGBE_LEDCTL, led_reg);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_init_eeprom_params_generic - Initialize EEPROM params
+ *  @hw: pointer to hardware structure
+ *
+ *  Initializes the EEPROM parameters ixgbe_eeprom_info within the
+ *  ixgbe_hw struct in order to set up EEPROM access.
+ **/
+s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw)
+{
+	struct ixgbe_eeprom_info *eeprom = &hw->eeprom;
+	u32 eec;
+	u16 eeprom_size;
+
+	if (eeprom->type == ixgbe_eeprom_uninitialized) {
+		eeprom->type = ixgbe_eeprom_none;
+
+		/*
+		 * Check for EEPROM present first.
+		 * If not present leave as none
+		 */
+		eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+		if (eec & IXGBE_EEC_PRES) {
+			eeprom->type = ixgbe_eeprom_spi;
+
+			/*
+			 * SPI EEPROM is assumed here.  This code would need to
+			 * change if a future EEPROM is not SPI.
+			 */
+			eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >>
+					    IXGBE_EEC_SIZE_SHIFT);
+			eeprom->word_size = 1 << (eeprom_size +
+						  IXGBE_EEPROM_WORD_SIZE_SHIFT);
+		}
+
+		if (eec & IXGBE_EEC_ADDR_SIZE)
+			eeprom->address_bits = 16;
+		else
+			eeprom->address_bits = 8;
+		DEBUGOUT3("Eeprom params: type = %d, size = %d, address bits: "
+			  "%d\n", eeprom->type, eeprom->word_size,
+			  eeprom->address_bits);
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_write_eeprom_generic - Writes 16 bit value to EEPROM
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be written to
+ *  @data: 16 bit word to be written to the EEPROM
+ *
+ *  If ixgbe_eeprom_update_checksum is not called after this function, the
+ *  EEPROM will most likely contain an invalid checksum.
+ **/
+s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data)
+{
+	s32 status;
+	u8 write_opcode = IXGBE_EEPROM_WRITE_OPCODE_SPI;
+
+	/* Prepare the EEPROM for writing  */
+	status = ixgbe_acquire_eeprom(hw);
+
+	if (status == IXGBE_SUCCESS) {
+		if (ixgbe_ready_eeprom(hw) != IXGBE_SUCCESS) {
+			ixgbe_release_eeprom(hw);
+			status = IXGBE_ERR_EEPROM;
+		}
+	}
+
+	if (status == IXGBE_SUCCESS) {
+		ixgbe_standby_eeprom(hw);
+
+		/*  Send the WRITE ENABLE command (8 bit opcode )  */
+		ixgbe_shift_out_eeprom_bits(hw, IXGBE_EEPROM_WREN_OPCODE_SPI,
+					    IXGBE_EEPROM_OPCODE_BITS);
+
+		ixgbe_standby_eeprom(hw);
+
+		/*
+		 * Some SPI eeproms use the 8th address bit embedded in the
+		 * opcode
+		 */
+		if ((hw->eeprom.address_bits == 8) && (offset >= 128))
+			write_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
+
+		/* Send the Write command (8-bit opcode + addr) */
+		ixgbe_shift_out_eeprom_bits(hw, write_opcode,
+					    IXGBE_EEPROM_OPCODE_BITS);
+		ixgbe_shift_out_eeprom_bits(hw, (u16)(offset*2),
+					    hw->eeprom.address_bits);
+
+		/* Send the data */
+		data = (data >> 8) | (data << 8);
+		ixgbe_shift_out_eeprom_bits(hw, data, 16);
+		ixgbe_standby_eeprom(hw);
+
+		msec_delay(10);
+
+		/* Done with writing - release the EEPROM */
+		ixgbe_release_eeprom(hw);
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_read_eeprom_bit_bang_generic - Read EEPROM word using bit-bang
+ *  @hw: pointer to hardware structure
+ *  @offset: offset within the EEPROM to be read
+ *  @data: read 16 bit value from EEPROM
+ *
+ *  Reads 16 bit value from EEPROM through bit-bang method
+ **/
+s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+				       u16 *data)
+{
+	s32 status;
+	u16 word_in;
+	u8 read_opcode = IXGBE_EEPROM_READ_OPCODE_SPI;
+
+	/* Prepare the EEPROM for reading  */
+	status = ixgbe_acquire_eeprom(hw);
+
+	if (status == IXGBE_SUCCESS) {
+		if (ixgbe_ready_eeprom(hw) != IXGBE_SUCCESS) {
+			ixgbe_release_eeprom(hw);
+			status = IXGBE_ERR_EEPROM;
+		}
+	}
+
+	if (status == IXGBE_SUCCESS) {
+		ixgbe_standby_eeprom(hw);
+
+		/*
+		 * Some SPI eeproms use the 8th address bit embedded in the
+		 * opcode
+		 */
+		if ((hw->eeprom.address_bits == 8) && (offset >= 128))
+			read_opcode |= IXGBE_EEPROM_A8_OPCODE_SPI;
+
+		/* Send the READ command (opcode + addr) */
+		ixgbe_shift_out_eeprom_bits(hw, read_opcode,
+					    IXGBE_EEPROM_OPCODE_BITS);
+		ixgbe_shift_out_eeprom_bits(hw, (u16)(offset*2),
+					    hw->eeprom.address_bits);
+
+		/* Read the data. */
+		word_in = ixgbe_shift_in_eeprom_bits(hw, 16);
+		*data = (word_in >> 8) | (word_in << 8);
+
+		/* End this read operation */
+		ixgbe_release_eeprom(hw);
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_read_eeprom_generic - Read EEPROM word using EERD
+ *  @hw: pointer to hardware structure
+ *  @offset: offset of  word in the EEPROM to read
+ *  @data: word read from the EEPROM
+ *
+ *  Reads a 16 bit word from the EEPROM using the EERD register.
+ **/
+s32 ixgbe_read_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 *data)
+{
+	u32 eerd;
+	s32 status;
+
+	eerd = (offset << IXGBE_EEPROM_READ_ADDR_SHIFT) +
+	       IXGBE_EEPROM_READ_REG_START;
+
+	IXGBE_WRITE_REG(hw, IXGBE_EERD, eerd);
+	status = ixgbe_poll_eeprom_eerd_done(hw);
+
+	if (status == IXGBE_SUCCESS)
+		*data = (IXGBE_READ_REG(hw, IXGBE_EERD) >>
+			IXGBE_EEPROM_READ_REG_DATA);
+	else
+		DEBUGOUT("Eeprom read timed out\n");
+
+	return status;
+}
+
+/**
+ *  ixgbe_poll_eeprom_eerd_done - Poll EERD status
+ *  @hw: pointer to hardware structure
+ *
+ *  Polls the status bit (bit 1) of the EERD to determine when the read is done.
+ **/
+static s32 ixgbe_poll_eeprom_eerd_done(struct ixgbe_hw *hw)
+{
+	u32 i;
+	u32 reg;
+	s32 status = IXGBE_ERR_EEPROM;
+
+	for (i = 0; i < IXGBE_EERD_ATTEMPTS; i++) {
+		reg = IXGBE_READ_REG(hw, IXGBE_EERD);
+		if (reg & IXGBE_EEPROM_READ_REG_DONE) {
+			status = IXGBE_SUCCESS;
+			break;
+		}
+		usec_delay(5);
+	}
+	return status;
+}
+
+/**
+ *  ixgbe_acquire_eeprom - Acquire EEPROM using bit-bang
+ *  @hw: pointer to hardware structure
+ *
+ *  Prepares EEPROM for access using bit-bang method. This function should
+ *  be called before issuing a command to the EEPROM.
+ **/
+static s32 ixgbe_acquire_eeprom(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_SUCCESS;
+	u32 eec;
+	u32 i;
+
+	if (ixgbe_acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) != IXGBE_SUCCESS)
+		status = IXGBE_ERR_SWFW_SYNC;
+
+	if (status == IXGBE_SUCCESS) {
+		eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+		/* Request EEPROM Access */
+		eec |= IXGBE_EEC_REQ;
+		IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+
+		for (i = 0; i < IXGBE_EEPROM_GRANT_ATTEMPTS; i++) {
+			eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+			if (eec & IXGBE_EEC_GNT)
+				break;
+			usec_delay(5);
+		}
+
+		/* Release if grant not aquired */
+		if (!(eec & IXGBE_EEC_GNT)) {
+			eec &= ~IXGBE_EEC_REQ;
+			IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+			DEBUGOUT("Could not acquire EEPROM grant\n");
+
+			ixgbe_release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+			status = IXGBE_ERR_EEPROM;
+		}
+	}
+
+	/* Setup EEPROM for Read/Write */
+	if (status == IXGBE_SUCCESS) {
+		/* Clear CS and SK */
+		eec &= ~(IXGBE_EEC_CS | IXGBE_EEC_SK);
+		IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+		IXGBE_WRITE_FLUSH(hw);
+		usec_delay(1);
+	}
+	return status;
+}
+
+/**
+ *  ixgbe_get_eeprom_semaphore - Get hardware semaphore
+ *  @hw: pointer to hardware structure
+ *
+ *  Sets the hardware semaphores so EEPROM access can occur for bit-bang method
+ **/
+static s32 ixgbe_get_eeprom_semaphore(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_ERR_EEPROM;
+	u32 timeout;
+	u32 i;
+	u32 swsm;
+
+	/* Set timeout value based on size of EEPROM */
+	timeout = hw->eeprom.word_size + 1;
+
+	/* Get SMBI software semaphore between device drivers first */
+	for (i = 0; i < timeout; i++) {
+		/*
+		 * If the SMBI bit is 0 when we read it, then the bit will be
+		 * set and we have the semaphore
+		 */
+		swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+		if (!(swsm & IXGBE_SWSM_SMBI)) {
+			status = IXGBE_SUCCESS;
+			break;
+		}
+		msec_delay(1);
+	}
+
+	/* Now get the semaphore between SW/FW through the SWESMBI bit */
+	if (status == IXGBE_SUCCESS) {
+		for (i = 0; i < timeout; i++) {
+			swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+
+			/* Set the SW EEPROM semaphore bit to request access */
+			swsm |= IXGBE_SWSM_SWESMBI;
+			IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm);
+
+			/*
+			 * If we set the bit successfully then we got the
+			 * semaphore.
+			 */
+			swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+			if (swsm & IXGBE_SWSM_SWESMBI)
+				break;
+
+			usec_delay(50);
+		}
+
+		/*
+		 * Release semaphores and return error if SW EEPROM semaphore
+		 * was not granted because we don't have access to the EEPROM
+		 */
+		if (i >= timeout) {
+			DEBUGOUT("Driver can't access the Eeprom - Semaphore "
+				 "not granted.\n");
+			ixgbe_release_eeprom_semaphore(hw);
+			status = IXGBE_ERR_EEPROM;
+		}
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_release_eeprom_semaphore - Release hardware semaphore
+ *  @hw: pointer to hardware structure
+ *
+ *  This function clears hardware semaphore bits.
+ **/
+static void ixgbe_release_eeprom_semaphore(struct ixgbe_hw *hw)
+{
+	u32 swsm;
+
+	swsm = IXGBE_READ_REG(hw, IXGBE_SWSM);
+
+	/* Release both semaphores by writing 0 to the bits SWESMBI and SMBI */
+	swsm &= ~(IXGBE_SWSM_SWESMBI | IXGBE_SWSM_SMBI);
+	IXGBE_WRITE_REG(hw, IXGBE_SWSM, swsm);
+}
+
+/**
+ *  ixgbe_ready_eeprom - Polls for EEPROM ready
+ *  @hw: pointer to hardware structure
+ **/
+static s32 ixgbe_ready_eeprom(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_SUCCESS;
+	u16 i;
+	u8 spi_stat_reg;
+
+	/*
+	 * Read "Status Register" repeatedly until the LSB is cleared.  The
+	 * EEPROM will signal that the command has been completed by clearing
+	 * bit 0 of the internal status register.  If it's not cleared within
+	 * 5 milliseconds, then error out.
+	 */
+	for (i = 0; i < IXGBE_EEPROM_MAX_RETRY_SPI; i += 5) {
+		ixgbe_shift_out_eeprom_bits(hw, IXGBE_EEPROM_RDSR_OPCODE_SPI,
+					    IXGBE_EEPROM_OPCODE_BITS);
+		spi_stat_reg = (u8)ixgbe_shift_in_eeprom_bits(hw, 8);
+		if (!(spi_stat_reg & IXGBE_EEPROM_STATUS_RDY_SPI))
+			break;
+
+		usec_delay(5);
+		ixgbe_standby_eeprom(hw);
+	};
+
+	/*
+	 * On some parts, SPI write time could vary from 0-20mSec on 3.3V
+	 * devices (and only 0-5mSec on 5V devices)
+	 */
+	if (i >= IXGBE_EEPROM_MAX_RETRY_SPI) {
+		DEBUGOUT("SPI EEPROM Status error\n");
+		status = IXGBE_ERR_EEPROM;
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_standby_eeprom - Returns EEPROM to a "standby" state
+ *  @hw: pointer to hardware structure
+ **/
+static void ixgbe_standby_eeprom(struct ixgbe_hw *hw)
+{
+	u32 eec;
+
+	eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+	/* Toggle CS to flush commands */
+	eec |= IXGBE_EEC_CS;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+	IXGBE_WRITE_FLUSH(hw);
+	usec_delay(1);
+	eec &= ~IXGBE_EEC_CS;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+	IXGBE_WRITE_FLUSH(hw);
+	usec_delay(1);
+}
+
+/**
+ *  ixgbe_shift_out_eeprom_bits - Shift data bits out to the EEPROM.
+ *  @hw: pointer to hardware structure
+ *  @data: data to send to the EEPROM
+ *  @count: number of bits to shift out
+ **/
+static void ixgbe_shift_out_eeprom_bits(struct ixgbe_hw *hw, u16 data,
+					u16 count)
+{
+	u32 eec;
+	u32 mask;
+	u32 i;
+
+	eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+	/*
+	 * Mask is used to shift "count" bits of "data" out to the EEPROM
+	 * one bit at a time.  Determine the starting bit based on count
+	 */
+	mask = 0x01 << (count - 1);
+
+	for (i = 0; i < count; i++) {
+		/*
+		 * A "1" is shifted out to the EEPROM by setting bit "DI" to a
+		 * "1", and then raising and then lowering the clock (the SK
+		 * bit controls the clock input to the EEPROM).  A "0" is
+		 * shifted out to the EEPROM by setting "DI" to "0" and then
+		 * raising and then lowering the clock.
+		 */
+		if (data & mask)
+			eec |= IXGBE_EEC_DI;
+		else
+			eec &= ~IXGBE_EEC_DI;
+
+		IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+		IXGBE_WRITE_FLUSH(hw);
+
+		usec_delay(1);
+
+		ixgbe_raise_eeprom_clk(hw, &eec);
+		ixgbe_lower_eeprom_clk(hw, &eec);
+
+		/*
+		 * Shift mask to signify next bit of data to shift in to the
+		 * EEPROM
+		 */
+		mask = mask >> 1;
+	};
+
+	/* We leave the "DI" bit set to "0" when we leave this routine. */
+	eec &= ~IXGBE_EEC_DI;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+	IXGBE_WRITE_FLUSH(hw);
+}
+
+/**
+ *  ixgbe_shift_in_eeprom_bits - Shift data bits in from the EEPROM
+ *  @hw: pointer to hardware structure
+ **/
+static u16 ixgbe_shift_in_eeprom_bits(struct ixgbe_hw *hw, u16 count)
+{
+	u32 eec;
+	u32 i;
+	u16 data = 0;
+
+	/*
+	 * In order to read a register from the EEPROM, we need to shift
+	 * 'count' bits in from the EEPROM. Bits are "shifted in" by raising
+	 * the clock input to the EEPROM (setting the SK bit), and then reading
+	 * the value of the "DO" bit.  During this "shifting in" process the
+	 * "DI" bit should always be clear.
+	 */
+	eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+	eec &= ~(IXGBE_EEC_DO | IXGBE_EEC_DI);
+
+	for (i = 0; i < count; i++) {
+		data = data << 1;
+		ixgbe_raise_eeprom_clk(hw, &eec);
+
+		eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+		eec &= ~(IXGBE_EEC_DI);
+		if (eec & IXGBE_EEC_DO)
+			data |= 1;
+
+		ixgbe_lower_eeprom_clk(hw, &eec);
+	}
+
+	return data;
+}
+
+/**
+ *  ixgbe_raise_eeprom_clk - Raises the EEPROM's clock input.
+ *  @hw: pointer to hardware structure
+ *  @eec: EEC register's current value
+ **/
+static void ixgbe_raise_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
+{
+	/*
+	 * Raise the clock input to the EEPROM
+	 * (setting the SK bit), then delay
+	 */
+	*eec = *eec | IXGBE_EEC_SK;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec);
+	IXGBE_WRITE_FLUSH(hw);
+	usec_delay(1);
+}
+
+/**
+ *  ixgbe_lower_eeprom_clk - Lowers the EEPROM's clock input.
+ *  @hw: pointer to hardware structure
+ *  @eecd: EECD's current value
+ **/
+static void ixgbe_lower_eeprom_clk(struct ixgbe_hw *hw, u32 *eec)
+{
+	/*
+	 * Lower the clock input to the EEPROM (clearing the SK bit), then
+	 * delay
+	 */
+	*eec = *eec & ~IXGBE_EEC_SK;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC, *eec);
+	IXGBE_WRITE_FLUSH(hw);
+	usec_delay(1);
+}
+
+/**
+ *  ixgbe_release_eeprom - Release EEPROM, release semaphores
+ *  @hw: pointer to hardware structure
+ **/
+static void ixgbe_release_eeprom(struct ixgbe_hw *hw)
+{
+	u32 eec;
+
+	eec = IXGBE_READ_REG(hw, IXGBE_EEC);
+
+	eec |= IXGBE_EEC_CS;  /* Pull CS high */
+	eec &= ~IXGBE_EEC_SK; /* Lower SCK */
+
+	IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+	IXGBE_WRITE_FLUSH(hw);
+
+	usec_delay(1);
+
+	/* Stop requesting EEPROM access */
+	eec &= ~IXGBE_EEC_REQ;
+	IXGBE_WRITE_REG(hw, IXGBE_EEC, eec);
+
+	ixgbe_release_swfw_sync(hw, IXGBE_GSSR_EEP_SM);
+}
+
+/**
+ *  ixgbe_calc_eeprom_checksum - Calculates and returns the checksum
+ *  @hw: pointer to hardware structure
+ **/
+static u16 ixgbe_calc_eeprom_checksum(struct ixgbe_hw *hw)
+{
+	u16 i;
+	u16 j;
+	u16 checksum = 0;
+	u16 length = 0;
+	u16 pointer = 0;
+	u16 word = 0;
+
+	/* Include 0x0-0x3F in the checksum */
+	for (i = 0; i < IXGBE_EEPROM_CHECKSUM; i++) {
+		if (ixgbe_read_eeprom(hw, i, &word) != IXGBE_SUCCESS) {
+			DEBUGOUT("EEPROM read failed\n");
+			break;
+		}
+		checksum += word;
+	}
+
+	/* Include all data from pointers except for the fw pointer */
+	for (i = IXGBE_PCIE_ANALOG_PTR; i < IXGBE_FW_PTR; i++) {
+		ixgbe_read_eeprom(hw, i, &pointer);
+
+		/* Make sure the pointer seems valid */
+		if (pointer != 0xFFFF && pointer != 0) {
+			ixgbe_read_eeprom(hw, pointer, &length);
+
+			if (length != 0xFFFF && length != 0) {
+				for (j = pointer+1; j <= pointer+length; j++) {
+					ixgbe_read_eeprom(hw, j, &word);
+					checksum += word;
+				}
+			}
+		}
+	}
+
+	checksum = (u16)IXGBE_EEPROM_SUM - checksum;
+
+	return checksum;
+}
+
+/**
+ *  ixgbe_validate_eeprom_checksum_generic - Validate EEPROM checksum
+ *  @hw: pointer to hardware structure
+ *  @checksum_val: calculated checksum
+ *
+ *  Performs checksum calculation and validates the EEPROM checksum.  If the
+ *  caller does not need checksum_val, the value can be NULL.
+ **/
+s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw,
+					   u16 *checksum_val)
+{
+	s32 status;
+	u16 checksum;
+	u16 read_checksum = 0;
+
+	/*
+	 * Read the first word from the EEPROM. If this times out or fails, do
+	 * not continue or we could be in for a very long wait while every
+	 * EEPROM read fails
+	 */
+	status = ixgbe_read_eeprom(hw, 0, &checksum);
+
+	if (status == IXGBE_SUCCESS) {
+		checksum = ixgbe_calc_eeprom_checksum(hw);
+
+		ixgbe_read_eeprom(hw, IXGBE_EEPROM_CHECKSUM, &read_checksum);
+
+		/*
+		 * Verify read checksum from EEPROM is the same as
+		 * calculated checksum
+		 */
+		if (read_checksum != checksum) {
+			status = IXGBE_ERR_EEPROM_CHECKSUM;
+		}
+
+		/* If the user cares, return the calculated checksum */
+		if (checksum_val) {
+			*checksum_val = checksum;
+		}
+	} else {
+		DEBUGOUT("EEPROM read failed\n");
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_update_eeprom_checksum_generic - Updates the EEPROM checksm
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw)
+{
+	s32 status;
+	u16 checksum;
+
+	/*
+	 * Read the first word from the EEPROM. If this times out or fails, do
+	 * not continue or we could be in for a very long wait while every
+	 * EEPROM read fails
+	 */
+	status = ixgbe_read_eeprom(hw, 0, &checksum);
+
+	if (status == IXGBE_SUCCESS) {
+		checksum = ixgbe_calc_eeprom_checksum(hw);
+		status = ixgbe_write_eeprom(hw, IXGBE_EEPROM_CHECKSUM,
+					    checksum);
+	} else {
+		DEBUGOUT("EEPROM read failed\n");
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_validate_mac_addr - Validate MAC address
+ *  @mac_addr: pointer to MAC address.
+ *
+ *  Tests a MAC address to ensure it is a valid Individual Address
+ **/
+s32 ixgbe_validate_mac_addr(u8 *mac_addr)
+{
+	s32 status = IXGBE_SUCCESS;
+
+	/* Make sure it is not a multicast address */
+	if (IXGBE_IS_MULTICAST(mac_addr)) {
+		DEBUGOUT("MAC address is multicast\n");
+		status = IXGBE_ERR_INVALID_MAC_ADDR;
+	/* Not a broadcast address */
+	} else if (IXGBE_IS_BROADCAST(mac_addr)) {
+		DEBUGOUT("MAC address is broadcast\n");
+		status = IXGBE_ERR_INVALID_MAC_ADDR;
+	/* Reject the zero address */
+	} else if (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0 &&
+		 mac_addr[3] == 0 && mac_addr[4] == 0 && mac_addr[5] == 0) {
+		DEBUGOUT("MAC address is all zeros\n");
+		status = IXGBE_ERR_INVALID_MAC_ADDR;
+	}
+	return status;
+}
+
+/**
+ *  ixgbe_set_rar_generic - Set RX address register
+ *  @hw: pointer to hardware structure
+ *  @addr: Address to put into receive address register
+ *  @index: Receive address register to write
+ *  @vind: Vind to set RAR to
+ *  @enable_addr: set flag that address is active
+ *
+ *  Puts an ethernet address into a receive address register.
+ **/
+s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr, u32 vind,
+			  u32 enable_addr)
+{
+	u32 rar_low, rar_high;
+
+	/*
+	 * HW expects these in little endian so we reverse the byte order from
+	 * network order (big endian) to little endian
+	 */
+	rar_low = ((u32)addr[0] |
+		   ((u32)addr[1] << 8) |
+		   ((u32)addr[2] << 16) |
+		   ((u32)addr[3] << 24));
+
+	rar_high = ((u32)addr[4] |
+		    ((u32)addr[5] << 8) |
+		    ((vind << IXGBE_RAH_VIND_SHIFT) & IXGBE_RAH_VIND_MASK));
+
+	if (enable_addr != 0)
+		rar_high |= IXGBE_RAH_AV;
+
+	IXGBE_WRITE_REG(hw, IXGBE_RAL(index), rar_low);
+	IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_enable_rar - Enable RX address register
+ *  @hw: pointer to hardware structure
+ *  @index: index into the RAR table
+ *
+ *  Enables the select receive address register.
+ **/
+static void ixgbe_enable_rar(struct ixgbe_hw *hw, u32 index)
+{
+	u32 rar_high;
+
+	rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
+	rar_high |= IXGBE_RAH_AV;
+	IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
+}
+
+/**
+ *  ixgbe_disable_rar - Disable RX address register
+ *  @hw: pointer to hardware structure
+ *  @index: index into the RAR table
+ *
+ *  Disables the select receive address register.
+ **/
+static void ixgbe_disable_rar(struct ixgbe_hw *hw, u32 index)
+{
+	u32 rar_high;
+
+	rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(index));
+	rar_high &= (~IXGBE_RAH_AV);
+	IXGBE_WRITE_REG(hw, IXGBE_RAH(index), rar_high);
+}
+
+/**
+ *  ixgbe_init_rx_addrs_generic - Initializes receive address filters.
+ *  @hw: pointer to hardware structure
+ *
+ *  Places the MAC address in receive address register 0 and clears the rest
+ *  of the receive addresss registers. Clears the multicast table. Assumes
+ *  the receiver is in reset when the routine is called.
+ **/
+s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw)
+{
+	u32 i;
+	u32 rar_entries = ixgbe_get_num_rx_addrs(hw);
+
+	/*
+	 * If the current mac address is valid, assume it is a software override
+	 * to the permanent address.
+	 * Otherwise, use the permanent address from the eeprom.
+	 */
+	if (ixgbe_validate_mac_addr(hw->mac.addr) ==
+	    IXGBE_ERR_INVALID_MAC_ADDR) {
+		/* Get the MAC address from the RAR0 for later reference */
+		ixgbe_get_mac_addr(hw, hw->mac.addr);
+
+		DEBUGOUT3(" Keeping Current RAR0 Addr =%.2X %.2X %.2X ",
+			  hw->mac.addr[0], hw->mac.addr[1],
+			  hw->mac.addr[2]);
+		DEBUGOUT3("%.2X %.2X %.2X\n", hw->mac.addr[3],
+			  hw->mac.addr[4], hw->mac.addr[5]);
+	} else {
+		/* Setup the receive address. */
+		DEBUGOUT("Overriding MAC Address in RAR[0]\n");
+		DEBUGOUT3(" New MAC Addr =%.2X %.2X %.2X ",
+			  hw->mac.addr[0], hw->mac.addr[1],
+			  hw->mac.addr[2]);
+		DEBUGOUT3("%.2X %.2X %.2X\n", hw->mac.addr[3],
+			  hw->mac.addr[4], hw->mac.addr[5]);
+
+		ixgbe_set_rar(hw, 0, hw->mac.addr, 0, IXGBE_RAH_AV);
+	}
+
+	hw->addr_ctrl.rar_used_count = 1;
+
+	/* Zero out the other receive addresses. */
+	DEBUGOUT("Clearing RAR[1-15]\n");
+	for (i = 1; i < rar_entries; i++) {
+		IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0);
+	}
+
+	/* Clear the MTA */
+	hw->addr_ctrl.mc_addr_in_rar_count = 0;
+	hw->addr_ctrl.mta_in_use = 0;
+	IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type);
+
+	DEBUGOUT(" Clearing MTA\n");
+	for (i = 0; i < IXGBE_MC_TBL_SIZE; i++)
+		IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_mta_vector - Determines bit-vector in multicast table to set
+ *  @hw: pointer to hardware structure
+ *  @mc_addr: the multicast address
+ *
+ *  Extracts the 12 bits, from a multicast address, to determine which
+ *  bit-vector to set in the multicast table. The hardware uses 12 bits, from
+ *  incoming rx multicast addresses, to determine the bit-vector to check in
+ *  the MTA. Which of the 4 combination, of 12-bits, the hardware uses is set
+ *  by the MO field of the MCSTCTRL. The MO field is set during initalization
+ *  to mc_filter_type.
+ **/
+static s32 ixgbe_mta_vector(struct ixgbe_hw *hw, u8 *mc_addr)
+{
+	u32 vector = 0;
+
+	switch (hw->mac.mc_filter_type) {
+	case 0:	  /* use bits [47:36] of the address */
+		vector = ((mc_addr[4] >> 4) | (((u16)mc_addr[5]) << 4));
+		break;
+	case 1:	  /* use bits [46:35] of the address */
+		vector = ((mc_addr[4] >> 3) | (((u16)mc_addr[5]) << 5));
+		break;
+	case 2:	  /* use bits [45:34] of the address */
+		vector = ((mc_addr[4] >> 2) | (((u16)mc_addr[5]) << 6));
+		break;
+	case 3:	  /* use bits [43:32] of the address */
+		vector = ((mc_addr[4]) | (((u16)mc_addr[5]) << 8));
+		break;
+	default:	 /* Invalid mc_filter_type */
+		DEBUGOUT("MC filter type param set incorrectly\n");
+		ASSERT(0);
+		break;
+	}
+
+	/* vector can only be 12-bits or boundary will be exceeded */
+	vector &= 0xFFF;
+	return vector;
+}
+
+/**
+ *  ixgbe_set_mta - Set bit-vector in multicast table
+ *  @hw: pointer to hardware structure
+ *  @hash_value: Multicast address hash value
+ *
+ *  Sets the bit-vector in the multicast table.
+ **/
+void ixgbe_set_mta(struct ixgbe_hw *hw, u8 *mc_addr)
+{
+	u32 vector;
+	u32 vector_bit;
+	u32 vector_reg;
+	u32 mta_reg;
+
+	hw->addr_ctrl.mta_in_use++;
+
+	vector = ixgbe_mta_vector(hw, mc_addr);
+	DEBUGOUT1(" bit-vector = 0x%03X\n", vector);
+
+	/*
+	 * The MTA is a register array of 128 32-bit registers. It is treated
+	 * like an array of 4096 bits.  We want to set bit
+	 * BitArray[vector_value]. So we figure out what register the bit is
+	 * in, read it, OR in the new bit, then write back the new value.  The
+	 * register is determined by the upper 7 bits of the vector value and
+	 * the bit within that register are determined by the lower 5 bits of
+	 * the value.
+	 */
+	vector_reg = (vector >> 5) & 0x7F;
+	vector_bit = vector & 0x1F;
+	mta_reg = IXGBE_READ_REG(hw, IXGBE_MTA(vector_reg));
+	mta_reg |= (1 << vector_bit);
+	IXGBE_WRITE_REG(hw, IXGBE_MTA(vector_reg), mta_reg);
+}
+
+/**
+ *  ixgbe_add_mc_addr - Adds a multicast address.
+ *  @hw: pointer to hardware structure
+ *  @mc_addr: new multicast address
+ *
+ *  Adds it to unused receive address register or to the multicast table.
+ **/
+void ixgbe_add_mc_addr(struct ixgbe_hw *hw, u8 *mc_addr)
+{
+	u32 rar_entries = ixgbe_get_num_rx_addrs(hw);
+
+	DEBUGOUT6(" MC Addr =%.2X %.2X %.2X %.2X %.2X %.2X\n",
+		  mc_addr[0], mc_addr[1], mc_addr[2],
+		  mc_addr[3], mc_addr[4], mc_addr[5]);
+
+	/*
+	 * Place this multicast address in the RAR if there is room,
+	 * else put it in the MTA
+	 */
+	if (hw->addr_ctrl.rar_used_count < rar_entries) {
+		ixgbe_set_rar(hw, hw->addr_ctrl.rar_used_count,
+			      mc_addr, 0, IXGBE_RAH_AV);
+		DEBUGOUT1("Added a multicast address to RAR[%d]\n",
+			  hw->addr_ctrl.rar_used_count);
+		hw->addr_ctrl.rar_used_count++;
+		hw->addr_ctrl.mc_addr_in_rar_count++;
+	} else {
+		ixgbe_set_mta(hw, mc_addr);
+	}
+
+	DEBUGOUT("ixgbe_add_mc_addr Complete\n");
+}
+
+/**
+ *  ixgbe_update_mc_addr_list_generic - Updates MAC list of multicast addresses
+ *  @hw: pointer to hardware structure
+ *  @mc_addr_list: the list of new multicast addresses
+ *  @mc_addr_count: number of addresses
+ *  @pad: number of bytes between addresses in the list
+ *
+ *  The given list replaces any existing list. Clears the MC addrs from receive
+ *  address registers and the multicast table. Uses unsed receive address
+ *  registers for the first multicast addresses, and hashes the rest into the
+ *  multicast table.
+ **/
+s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list,
+				      u32 mc_addr_count, u32 pad)
+{
+	u32 i;
+	u32 rar_entries = ixgbe_get_num_rx_addrs(hw);
+
+	/*
+	 * Set the new number of MC addresses that we are being requested to
+	 * use.
+	 */
+	hw->addr_ctrl.num_mc_addrs = mc_addr_count;
+	hw->addr_ctrl.rar_used_count -= hw->addr_ctrl.mc_addr_in_rar_count;
+	hw->addr_ctrl.mc_addr_in_rar_count = 0;
+	hw->addr_ctrl.mta_in_use = 0;
+
+	/* Zero out the other receive addresses. */
+	DEBUGOUT("Clearing RAR[1-15]\n");
+	for (i = hw->addr_ctrl.rar_used_count; i < rar_entries; i++) {
+		IXGBE_WRITE_REG(hw, IXGBE_RAL(i), 0);
+		IXGBE_WRITE_REG(hw, IXGBE_RAH(i), 0);
+	}
+
+	/* Clear the MTA */
+	DEBUGOUT(" Clearing MTA\n");
+	for (i = 0; i < IXGBE_MC_TBL_SIZE; i++)
+		IXGBE_WRITE_REG(hw, IXGBE_MTA(i), 0);
+
+	/* Add the new addresses */
+	for (i = 0; i < mc_addr_count; i++) {
+		DEBUGOUT(" Adding the multicast addresses:\n");
+		ixgbe_add_mc_addr(hw, mc_addr_list +
+				  (i * (IXGBE_ETH_LENGTH_OF_ADDRESS + pad)));
+	}
+
+	/* Enable mta */
+	if (hw->addr_ctrl.mta_in_use > 0)
+		IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL,
+				IXGBE_MCSTCTRL_MFE | hw->mac.mc_filter_type);
+
+	DEBUGOUT("ixgbe_update_mc_addr_list_generic Complete\n");
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_enable_mc_generic - Enable multicast address in RAR
+ *  @hw: pointer to hardware structure
+ *
+ *  Enables multicast address in RAR and the use of the multicast hash table.
+ **/
+s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw)
+{
+	u32 i;
+	struct ixgbe_addr_filter_info *a = &hw->addr_ctrl;
+
+	if (a->mc_addr_in_rar_count > 0)
+		for (i = (a->rar_used_count - a->mc_addr_in_rar_count);
+		     i < a->rar_used_count; i++)
+			ixgbe_enable_rar(hw, i);
+
+	if (a->mta_in_use > 0)
+		IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, IXGBE_MCSTCTRL_MFE |
+				hw->mac.mc_filter_type);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_disable_mc_generic - Disable mutlicast address in RAR
+ *  @hw: pointer to hardware structure
+ *
+ *  Disables multicast address in RAR and the use of the multicast hash table.
+ **/
+s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw)
+{
+	u32 i;
+	struct ixgbe_addr_filter_info *a = &hw->addr_ctrl;
+
+	if (a->mc_addr_in_rar_count > 0)
+		for (i = (a->rar_used_count - a->mc_addr_in_rar_count);
+		     i < a->rar_used_count; i++)
+			ixgbe_disable_rar(hw, i);
+
+	if (a->mta_in_use > 0)
+		IXGBE_WRITE_REG(hw, IXGBE_MCSTCTRL, hw->mac.mc_filter_type);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_clear_vfta_generic - Clear VLAN filter table
+ *  @hw: pointer to hardware structure
+ *
+ *  Clears the VLAN filer table, and the VMDq index associated with the filter
+ **/
+s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw)
+{
+	u32 offset;
+	u32 vlanbyte;
+
+	for (offset = 0; offset < IXGBE_VLAN_FILTER_TBL_SIZE; offset++)
+		IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0);
+
+	for (vlanbyte = 0; vlanbyte < 4; vlanbyte++)
+		for (offset = 0; offset < IXGBE_VLAN_FILTER_TBL_SIZE; offset++)
+			IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(vlanbyte, offset),
+					0);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_set_vfta_generic - Set VLAN filter table
+ *  @hw: pointer to hardware structure
+ *  @vlan: VLAN id to write to VLAN filter
+ *  @vind: VMDq output index that maps queue to VLAN id in VFTA
+ *  @vlan_on: boolean flag to turn on/off VLAN in VFTA
+ *
+ *  Turn on/off specified VLAN in the VLAN filter table.
+ **/
+s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan, u32 vind,
+			   bool vlan_on)
+{
+	u32 VftaIndex;
+	u32 BitOffset;
+	u32 VftaReg;
+	u32 VftaByte;
+
+	/* Determine 32-bit word position in array */
+	VftaIndex = (vlan >> 5) & 0x7F;   /* upper seven bits */
+
+	/* Determine the location of the (VMD) queue index */
+	VftaByte =  ((vlan >> 3) & 0x03); /* bits (4:3) indicating byte array */
+	BitOffset = (vlan & 0x7) << 2;    /* lower 3 bits indicate nibble */
+
+	/* Set the nibble for VMD queue index */
+	VftaReg = IXGBE_READ_REG(hw, IXGBE_VFTAVIND(VftaByte, VftaIndex));
+	VftaReg &= (~(0x0F << BitOffset));
+	VftaReg |= (vind << BitOffset);
+	IXGBE_WRITE_REG(hw, IXGBE_VFTAVIND(VftaByte, VftaIndex), VftaReg);
+
+	/* Determine the location of the bit for this VLAN id */
+	BitOffset = vlan & 0x1F;	   /* lower five bits */
+
+	VftaReg = IXGBE_READ_REG(hw, IXGBE_VFTA(VftaIndex));
+	if (vlan_on)
+		/* Turn on this VLAN id */
+		VftaReg |= (1 << BitOffset);
+	else
+		/* Turn off this VLAN id */
+		VftaReg &= ~(1 << BitOffset);
+	IXGBE_WRITE_REG(hw, IXGBE_VFTA(VftaIndex), VftaReg);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_setup_fc_generic - Configure flow control settings
+ *  @hw: pointer to hardware structure
+ *  @packetbuf_num: packet buffer number (0-7)
+ *
+ *  Configures the flow control settings based on SW configuration.
+ *  This function is used for 802.3x flow control configuration only.
+ **/
+s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw, s32 packetbuf_num)
+{
+	u32 frctl_reg;
+	u32 rmcs_reg;
+
+	if (packetbuf_num < 0 || packetbuf_num > 7) {
+		DEBUGOUT1("Invalid packet buffer number [%d], expected range is"
+			  " 0-7\n", packetbuf_num);
+		ASSERT(0);
+	}
+
+	frctl_reg = IXGBE_READ_REG(hw, IXGBE_FCTRL);
+	frctl_reg &= ~(IXGBE_FCTRL_RFCE | IXGBE_FCTRL_RPFCE);
+
+	rmcs_reg = IXGBE_READ_REG(hw, IXGBE_RMCS);
+	rmcs_reg &= ~(IXGBE_RMCS_TFCE_PRIORITY | IXGBE_RMCS_TFCE_802_3X);
+
+	/*
+	 * We want to save off the original Flow Control configuration just in
+	 * case we get disconnected and then reconnected into a different hub
+	 * or switch with different Flow Control capabilities.
+	 */
+	hw->fc.type = hw->fc.original_type;
+
+	/*
+	 * The possible values of the "flow_control" parameter are:
+	 * 0: Flow control is completely disabled
+	 * 1: Rx flow control is enabled (we can receive pause frames but not
+	 *    send pause frames).
+	 * 2: Tx flow control is enabled (we can send pause frames but we do not
+	 *    support receiving pause frames)
+	 * 3: Both Rx and TX flow control (symmetric) are enabled.
+	 * other: Invalid.
+	 */
+	switch (hw->fc.type) {
+	case ixgbe_fc_none:
+		break;
+	case ixgbe_fc_rx_pause:
+		/*
+		 * RX Flow control is enabled,
+		 * and TX Flow control is disabled.
+		 */
+		frctl_reg |= IXGBE_FCTRL_RFCE;
+		break;
+	case ixgbe_fc_tx_pause:
+		/*
+		 * TX Flow control is enabled, and RX Flow control is disabled,
+		 * by a software over-ride.
+		 */
+		rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
+		break;
+	case ixgbe_fc_full:
+		/*
+		 * Flow control (both RX and TX) is enabled by a software
+		 * over-ride.
+		 */
+		frctl_reg |= IXGBE_FCTRL_RFCE;
+		rmcs_reg |= IXGBE_RMCS_TFCE_802_3X;
+		break;
+	default:
+		/* We should never get here.  The value should be 0-3. */
+		DEBUGOUT("Flow control param set incorrectly\n");
+		ASSERT(0);
+		break;
+	}
+
+	/* Enable 802.3x based flow control settings. */
+	IXGBE_WRITE_REG(hw, IXGBE_FCTRL, frctl_reg);
+	IXGBE_WRITE_REG(hw, IXGBE_RMCS, rmcs_reg);
+
+	/*
+	 * We need to set up the Receive Threshold high and low water
+	 * marks as well as (optionally) enabling the transmission of
+	 * XON frames.
+	 */
+	if (hw->fc.type & ixgbe_fc_tx_pause) {
+		if (hw->fc.send_xon) {
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num),
+					(hw->fc.low_water | IXGBE_FCRTL_XONE));
+		} else {
+			IXGBE_WRITE_REG(hw, IXGBE_FCRTL(packetbuf_num),
+					hw->fc.low_water);
+		}
+		IXGBE_WRITE_REG(hw, IXGBE_FCRTH(packetbuf_num),
+				(hw->fc.high_water)|IXGBE_FCRTH_FCEN);
+	}
+
+	IXGBE_WRITE_REG(hw, IXGBE_FCTTV(0), hw->fc.pause_time);
+	IXGBE_WRITE_REG(hw, IXGBE_FCRTV, (hw->fc.pause_time >> 1));
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_disable_pcie_master - Disable PCI-express master access
+ *  @hw: pointer to hardware structure
+ *
+ *  Disables PCI-Express master access and verifies there are no pending
+ *  requests. IXGBE_ERR_MASTER_REQUESTS_PENDING is returned if master disable
+ *  bit hasn't caused the master requests to be disabled, else IXGBE_SUCCESS
+ *  is returned signifying master requests disabled.
+ **/
+s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw)
+{
+	u32 ctrl;
+	s32 i;
+	s32 status = IXGBE_ERR_MASTER_REQUESTS_PENDING;
+
+	ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL);
+	ctrl |= IXGBE_CTRL_GIO_DIS;
+	IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl);
+
+	for (i = 0; i < IXGBE_PCI_MASTER_DISABLE_TIMEOUT; i++) {
+		if (!(IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_GIO)) {
+			status = IXGBE_SUCCESS;
+			break;
+		}
+		usec_delay(100);
+	}
+
+	return status;
+}
+
+
+/**
+ *  ixgbe_acquire_swfw_sync - Aquire SWFW semaphore
+ *  @hw: pointer to hardware structure
+ *  @mask: Mask to specify wich semaphore to acquire
+ *
+ *  Aquires the SWFW semaphore throught the GSSR register for the specified
+ *  function (CSR, PHY0, PHY1, EEPROM, Flash)
+ **/
+s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask)
+{
+	u32 gssr;
+	u32 swmask = mask;
+	u32 fwmask = mask << 5;
+	s32 timeout = 200;
+
+	while (timeout) {
+		if (ixgbe_get_eeprom_semaphore(hw))
+			return -IXGBE_ERR_SWFW_SYNC;
+
+		gssr = IXGBE_READ_REG(hw, IXGBE_GSSR);
+		if (!(gssr & (fwmask | swmask)))
+			break;
+
+		/*
+		 * Firmware currently using resource (fwmask) or other software
+		 * thread currently using resource (swmask)
+		 */
+		ixgbe_release_eeprom_semaphore(hw);
+		msec_delay(5);
+		timeout--;
+	}
+
+	if (!timeout) {
+		DEBUGOUT("Driver can't access resource, GSSR timeout.\n");
+		return -IXGBE_ERR_SWFW_SYNC;
+	}
+
+	gssr |= swmask;
+	IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr);
+
+	ixgbe_release_eeprom_semaphore(hw);
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_release_swfw_sync - Release SWFW semaphore
+ *  @hw: pointer to hardware structure
+ *  @mask: Mask to specify wich semaphore to release
+ *
+ *  Releases the SWFW semaphore throught the GSSR register for the specified
+ *  function (CSR, PHY0, PHY1, EEPROM, Flash)
+ **/
+void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask)
+{
+	u32 gssr;
+	u32 swmask = mask;
+
+	ixgbe_get_eeprom_semaphore(hw);
+
+	gssr = IXGBE_READ_REG(hw, IXGBE_GSSR);
+	gssr &= ~swmask;
+	IXGBE_WRITE_REG(hw, IXGBE_GSSR, gssr);
+
+	ixgbe_release_eeprom_semaphore(hw);
+}
+
diff --git a/sys/dev/ixgbe/ixgbe_common.h b/sys/dev/ixgbe/ixgbe_common.h
new file mode 100644
index 0000000..236ce75
--- /dev/null
+++ b/sys/dev/ixgbe/ixgbe_common.h
@@ -0,0 +1,80 @@
+/*******************************************************************************
+
+  Copyright (c) 2001-2007, Intel Corporation 
+  All rights reserved.
+  
+  Redistribution and use in source and binary forms, with or without 
+  modification, are permitted provided that the following conditions are met:
+  
+   1. Redistributions of source code must retain the above copyright notice, 
+      this list of conditions and the following disclaimer.
+  
+   2. Redistributions in binary form must reproduce the above copyright 
+      notice, this list of conditions and the following disclaimer in the 
+      documentation and/or other materials provided with the distribution.
+  
+   3. Neither the name of the Intel Corporation nor the names of its 
+      contributors may be used to endorse or promote products derived from 
+      this software without specific prior written permission.
+  
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+  POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+/* $FreeBSD$ */
+
+#ifndef _IXGBE_COMMON_H_
+#define _IXGBE_COMMON_H_
+
+#include "ixgbe_type.h"
+
+s32 ixgbe_assign_func_pointers_generic(struct ixgbe_hw *hw);
+s32 ixgbe_init_hw_generic(struct ixgbe_hw *hw);
+s32 ixgbe_start_hw_generic(struct ixgbe_hw *hw);
+s32 ixgbe_clear_hw_cntrs_generic(struct ixgbe_hw *hw);
+s32 ixgbe_get_mac_addr_generic(struct ixgbe_hw *hw, u8 *mac_addr);
+s32 ixgbe_get_bus_info_generic(struct ixgbe_hw *hw);
+s32 ixgbe_stop_adapter_generic(struct ixgbe_hw *hw);
+
+s32 ixgbe_led_on_generic(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_led_off_generic(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_blink_led_start_generic(struct ixgbe_hw *hw, u32 index);
+s32 ixgbe_blink_led_stop_generic(struct ixgbe_hw *hw, u32 index);
+
+s32 ixgbe_init_eeprom_params_generic(struct ixgbe_hw *hw);
+s32 ixgbe_write_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 data);
+s32 ixgbe_read_eeprom_generic(struct ixgbe_hw *hw, u16 offset, u16 *data);
+s32 ixgbe_read_eeprom_bit_bang_generic(struct ixgbe_hw *hw, u16 offset,
+				       u16 *data);
+s32 ixgbe_validate_eeprom_checksum_generic(struct ixgbe_hw *hw,
+					   u16 *checksum_val);
+s32 ixgbe_update_eeprom_checksum_generic(struct ixgbe_hw *hw);
+
+s32 ixgbe_set_rar_generic(struct ixgbe_hw *hw, u32 index, u8 *addr,
+			  u32 vind, u32 enable_addr);
+s32 ixgbe_init_rx_addrs_generic(struct ixgbe_hw *hw);
+s32 ixgbe_update_mc_addr_list_generic(struct ixgbe_hw *hw, u8 *mc_addr_list,
+				      u32 mc_addr_count, u32 pad);
+s32 ixgbe_enable_mc_generic(struct ixgbe_hw *hw);
+s32 ixgbe_disable_mc_generic(struct ixgbe_hw *hw);
+s32 ixgbe_clear_vfta_generic(struct ixgbe_hw *hw);
+s32 ixgbe_set_vfta_generic(struct ixgbe_hw *hw, u32 vlan,
+			   u32 vind, bool vlan_on);
+
+s32 ixgbe_setup_fc_generic(struct ixgbe_hw *hw, s32 packtetbuf_num);
+
+s32 ixgbe_validate_mac_addr(u8 *mac_addr);
+s32 ixgbe_acquire_swfw_sync(struct ixgbe_hw *hw, u16 mask);
+void ixgbe_release_swfw_sync(struct ixgbe_hw *hw, u16 mask);
+s32 ixgbe_disable_pcie_master(struct ixgbe_hw *hw);
+
+#endif /* IXGBE_COMMON */
diff --git a/sys/dev/ixgbe/ixgbe_osdep.h b/sys/dev/ixgbe/ixgbe_osdep.h
new file mode 100644
index 0000000..a150908
--- /dev/null
+++ b/sys/dev/ixgbe/ixgbe_osdep.h
@@ -0,0 +1,130 @@
+/**************************************************************************
+
+Copyright (c) 2001-2007, Intel Corporation
+All rights reserved.
+
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ 1. Redistributions of source code must retain the above copyright notice,
+    this list of conditions and the following disclaimer.
+
+ 2. Redistributions in binary form must reproduce the above copyright
+    notice, this list of conditions and the following disclaimer in the
+    documentation and/or other materials provided with the distribution.
+
+ 3. Neither the name of the Intel Corporation nor the names of its
+    contributors may be used to endorse or promote products derived from
+    this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+
+***************************************************************************/
+/* $FreeBSD$ */
+
+#ifndef _IXGBE_OS_H_
+#define _IXGBE_OS_H_
+
+#include <sys/types.h>
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/mbuf.h>
+#include <sys/protosw.h>
+#include <sys/socket.h>
+#include <sys/malloc.h>
+#include <sys/kernel.h>
+#include <sys/bus.h>
+#include <machine/bus.h>
+#include <sys/rman.h>
+#include <machine/resource.h>
+#include <vm/vm.h>
+#include <vm/pmap.h>
+#include <machine/clock.h>
+#include <dev/pci/pcivar.h>
+#include <dev/pci/pcireg.h>
+
+#define ASSERT(x) if(!(x)) panic("IXGBE: x")
+
+/* The happy-fun DELAY macro is defined in /usr/src/sys/i386/include/clock.h */
+#define usec_delay(x) DELAY(x)
+#define msec_delay(x) DELAY(1000*(x))
+
+#define DBG 0 
+#define MSGOUT(S, A, B)     printf(S "\n", A, B)
+#define DEBUGFUNC(F)        DEBUGOUT(F);
+#if DBG
+	#define DEBUGOUT(S)         printf(S "\n")
+	#define DEBUGOUT1(S,A)      printf(S "\n",A)
+	#define DEBUGOUT2(S,A,B)    printf(S "\n",A,B)
+	#define DEBUGOUT3(S,A,B,C)  printf(S "\n",A,B,C)
+	#define DEBUGOUT7(S,A,B,C,D,E,F,G)  printf(S "\n",A,B,C,D,E,F,G)
+#else
+	#define DEBUGOUT(S)
+	#define DEBUGOUT1(S,A)
+	#define DEBUGOUT2(S,A,B)
+	#define DEBUGOUT3(S,A,B,C)
+	#define DEBUGOUT6(S,A,B,C,D,E,F)
+	#define DEBUGOUT7(S,A,B,C,D,E,F,G)
+#endif
+
+#define FALSE               0
+#define TRUE                1
+#define CMD_MEM_WRT_INVALIDATE          0x0010  /* BIT_4 */
+#define PCI_COMMAND_REGISTER            PCIR_COMMAND
+
+typedef uint8_t  u8;
+typedef uint16_t u16;
+typedef uint32_t u32;
+typedef int32_t	 s32;
+typedef uint64_t u64;
+typedef booleant bool;
+
+#define le16_to_cpu 
+
+struct ixgbe_osdep
+{
+	bus_space_tag_t    mem_bus_space_tag;
+	bus_space_handle_t mem_bus_space_handle;
+	struct device     *dev;
+};
+
+/* This is needed by the shared code */
+struct ixgbe_hw; 
+extern u16 ixgbe_read_pci_cfg(struct ixgbe_hw *, u32);
+#define IXGBE_READ_PCIE_WORD ixgbe_read_pci_cfg
+
+#define IXGBE_WRITE_FLUSH(a) IXGBE_READ_REG(a, IXGBE_STATUS)
+
+#define IXGBE_READ_REG(a, reg) (\
+   bus_space_read_4( ((struct ixgbe_osdep *)(a)->back)->mem_bus_space_tag, \
+                     ((struct ixgbe_osdep *)(a)->back)->mem_bus_space_handle, \
+                     reg))
+
+#define IXGBE_WRITE_REG(a, reg, value) (\
+   bus_space_write_4( ((struct ixgbe_osdep *)(a)->back)->mem_bus_space_tag, \
+                     ((struct ixgbe_osdep *)(a)->back)->mem_bus_space_handle, \
+                     reg, value))
+
+
+#define IXGBE_READ_REG_ARRAY(a, reg, offset) (\
+   bus_space_read_4( ((struct ixgbe_osdep *)(a)->back)->mem_bus_space_tag, \
+                     ((struct ixgbe_osdep *)(a)->back)->mem_bus_space_handle, \
+                     (reg + ((offset) << 2))))
+
+#define IXGBE_WRITE_REG_ARRAY(a, reg, offset, value) (\
+      bus_space_write_4( ((struct ixgbe_osdep *)(a)->back)->mem_bus_space_tag, \
+                      ((struct ixgbe_osdep *)(a)->back)->mem_bus_space_handle, \
+                      (reg + ((offset) << 2)), value))
+
+
+#endif /* _IXGBE_OS_H_ */
diff --git a/sys/dev/ixgbe/ixgbe_phy.c b/sys/dev/ixgbe/ixgbe_phy.c
new file mode 100644
index 0000000..5043109
--- /dev/null
+++ b/sys/dev/ixgbe/ixgbe_phy.c
@@ -0,0 +1,592 @@
+/*******************************************************************************
+
+  Copyright (c) 2001-2007, Intel Corporation 
+  All rights reserved.
+  
+  Redistribution and use in source and binary forms, with or without 
+  modification, are permitted provided that the following conditions are met:
+  
+   1. Redistributions of source code must retain the above copyright notice, 
+      this list of conditions and the following disclaimer.
+  
+   2. Redistributions in binary form must reproduce the above copyright 
+      notice, this list of conditions and the following disclaimer in the 
+      documentation and/or other materials provided with the distribution.
+  
+   3. Neither the name of the Intel Corporation nor the names of its 
+      contributors may be used to endorse or promote products derived from 
+      this software without specific prior written permission.
+  
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+  POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+/* $FreeBSD$ */
+
+#include "ixgbe_api.h"
+#include "ixgbe_common.h"
+#include "ixgbe_phy.h"
+
+/**
+ *  ixgbe_init_shared_code_phy - Initialize PHY shared code
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_init_shared_code_phy(struct ixgbe_hw *hw)
+{
+	/* Assign function pointers */
+	ixgbe_assign_func_pointers_phy(hw);
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_assign_func_pointers_phy -  Assigns PHY-specific function pointers
+ *  @hw: pointer to hardware structure
+ *
+ *  Note, generic function pointers have already been assigned, so the
+ *  function pointers set here are only for PHY-specific functions.
+ **/
+s32 ixgbe_assign_func_pointers_phy(struct ixgbe_hw *hw)
+{
+	hw->func.ixgbe_func_reset_phy =
+			    &ixgbe_reset_phy_generic;
+	hw->func.ixgbe_func_read_phy_reg =
+			    &ixgbe_read_phy_reg_generic;
+	hw->func.ixgbe_func_write_phy_reg =
+			    &ixgbe_write_phy_reg_generic;
+	hw->func.ixgbe_func_identify_phy =
+			    &ixgbe_identify_phy_generic;
+
+	if (ixgbe_get_media_type(hw) == ixgbe_media_type_copper) {
+		/* Call PHY identify routine to get the phy type */
+		ixgbe_identify_phy(hw);
+
+		switch (hw->phy.type) {
+		case ixgbe_phy_tn:
+			hw->func.ixgbe_func_setup_phy_link =
+					&ixgbe_setup_tnx_phy_link;
+			hw->func.ixgbe_func_check_phy_link =
+					&ixgbe_check_tnx_phy_link;
+			hw->func.ixgbe_func_setup_phy_link_speed =
+					&ixgbe_setup_tnx_phy_link_speed;
+			break;
+		default:
+			break;
+		}
+	}
+
+	return IXGBE_SUCCESS;
+}
+
+/**
+ *  ixgbe_identify_phy_generic - Get physical layer module
+ *  @hw: pointer to hardware structure
+ *
+ *  Determines the physical layer module found on the current adapter.
+ **/
+s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_ERR_PHY_ADDR_INVALID;
+	u32 phy_addr;
+
+	for (phy_addr = 0; phy_addr < IXGBE_MAX_PHY_ADDR; phy_addr++) {
+		if (ixgbe_validate_phy_addr(hw, phy_addr)) {
+			hw->phy.addr = phy_addr;
+			ixgbe_get_phy_id(hw);
+			hw->phy.type = ixgbe_get_phy_type_from_id(hw->phy.id);
+			status = IXGBE_SUCCESS;
+			break;
+		}
+	}
+	return status;
+}
+
+/**
+ *  ixgbe_validate_phy_addr - Determines phy address is valid
+ *  @hw: pointer to hardware structure
+ *
+ **/
+bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr)
+{
+	u16 phy_id = 0;
+	bool valid = FALSE;
+
+	hw->phy.addr = phy_addr;
+	ixgbe_read_phy_reg_generic(hw,
+				   IXGBE_MDIO_PHY_ID_HIGH,
+				   IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+				   &phy_id);
+
+	if (phy_id != 0xFFFF && phy_id != 0x0)
+		valid = TRUE;
+
+	return valid;
+}
+
+/**
+ *  ixgbe_get_phy_id - Get the phy type
+ *  @hw: pointer to hardware structure
+ *
+ **/
+s32 ixgbe_get_phy_id(struct ixgbe_hw *hw)
+{
+	u32 status;
+	u16 phy_id_high = 0;
+	u16 phy_id_low = 0;
+
+	status = ixgbe_read_phy_reg_generic(hw,
+				   IXGBE_MDIO_PHY_ID_HIGH,
+				   IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+				   &phy_id_high);
+
+	if (status == IXGBE_SUCCESS) {
+		hw->phy.id = (u32)(phy_id_high << 16);
+		status = ixgbe_read_phy_reg_generic(hw,
+					   IXGBE_MDIO_PHY_ID_LOW,
+					   IXGBE_MDIO_PMA_PMD_DEV_TYPE,
+					   &phy_id_low);
+		hw->phy.id |= (u32)(phy_id_low & IXGBE_PHY_REVISION_MASK);
+		hw->phy.revision = (u32)(phy_id_low & ~IXGBE_PHY_REVISION_MASK);
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_get_phy_type_from_id - Get the phy type
+ *  @hw: pointer to hardware structure
+ *
+ **/
+enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id)
+{
+	enum ixgbe_phy_type phy_type;
+
+	switch (phy_id) {
+	case TN1010_PHY_ID:
+		phy_type = ixgbe_phy_tn;
+		break;
+
+	case QT2022_PHY_ID:
+		phy_type = ixgbe_phy_qt;
+		break;
+
+	default:
+		phy_type = ixgbe_phy_unknown;
+		break;
+	}
+
+	return phy_type;
+}
+
+/**
+ *  ixgbe_reset_phy_generic - Performs a PHY reset
+ *  @hw: pointer to hardware structure
+ **/
+s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw)
+{
+	/*
+	 * Perform soft PHY reset to the PHY_XS.
+	 * This will cause a soft reset to the PHY
+	 */
+	return ixgbe_write_phy_reg(hw, IXGBE_MDIO_PHY_XS_CONTROL,
+				   IXGBE_MDIO_PHY_XS_DEV_TYPE,
+				   IXGBE_MDIO_PHY_XS_RESET);
+}
+
+/**
+ *  ixgbe_read_phy_reg_generic - Reads a value from a specified PHY register
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit address of PHY register to read
+ *  @phy_data: Pointer to read data from PHY register
+ **/
+s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+			       u32 device_type, u16 *phy_data)
+{
+	u32 command;
+	u32 i;
+	u32 timeout = 10;
+	u32 data;
+	s32 status = IXGBE_SUCCESS;
+	u16 gssr;
+
+	if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
+		gssr = IXGBE_GSSR_PHY1_SM;
+	else
+		gssr = IXGBE_GSSR_PHY0_SM;
+
+	if (ixgbe_acquire_swfw_sync(hw, gssr) != IXGBE_SUCCESS)
+		status = IXGBE_ERR_SWFW_SYNC;
+
+	if (status == IXGBE_SUCCESS) {
+		/* Setup and write the address cycle command */
+		command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
+			   (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+			   (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+			   (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
+
+		IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+		/*
+		 * Check every 10 usec to see if the address cycle completed.
+		 * The MDI Command bit will clear when the operation is
+		 * complete
+		 */
+		for (i = 0; i < timeout; i++) {
+			usec_delay(10);
+
+			command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+
+			if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) {
+				break;
+			}
+		}
+
+		if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+			DEBUGFUNC("PHY address command did not complete.\n");
+			status = IXGBE_ERR_PHY;
+		}
+
+		if (status == IXGBE_SUCCESS) {
+			/*
+			 * Address cycle complete, setup and write the read
+			 * command
+			 */
+			command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
+				   (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+				   (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+				   (IXGBE_MSCA_READ | IXGBE_MSCA_MDI_COMMAND));
+
+			IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+			/*
+			 * Check every 10 usec to see if the address cycle
+			 * completed. The MDI Command bit will clear when the
+			 * operation is complete
+			 */
+			for (i = 0; i < timeout; i++) {
+				usec_delay(10);
+
+				command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+
+				if ((command & IXGBE_MSCA_MDI_COMMAND) == 0)
+					break;
+			}
+
+			if ((command & IXGBE_MSCA_MDI_COMMAND) != 0) {
+				DEBUGFUNC("PHY read command didn't complete\n");
+				status = IXGBE_ERR_PHY;
+			} else {
+				/*
+				 * Read operation is complete.  Get the data
+				 * from MSRWD
+				 */
+				data = IXGBE_READ_REG(hw, IXGBE_MSRWD);
+				data >>= IXGBE_MSRWD_READ_DATA_SHIFT;
+				*phy_data = (u16)(data);
+			}
+		}
+
+		ixgbe_release_swfw_sync(hw, gssr);
+	}
+	return status;
+}
+
+/**
+ *  ixgbe_write_phy_reg_generic - Writes a value to specified PHY register
+ *  @hw: pointer to hardware structure
+ *  @reg_addr: 32 bit PHY register to write
+ *  @device_type: 5 bit device type
+ *  @phy_data: Data to write to the PHY register
+ **/
+s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+				u32 device_type, u16 phy_data)
+{
+	u32 command;
+	u32 i;
+	u32 timeout = 10;
+	s32 status = IXGBE_SUCCESS;
+	u16 gssr;
+
+	if (IXGBE_READ_REG(hw, IXGBE_STATUS) & IXGBE_STATUS_LAN_ID_1)
+		gssr = IXGBE_GSSR_PHY1_SM;
+	else
+		gssr = IXGBE_GSSR_PHY0_SM;
+
+	if (ixgbe_acquire_swfw_sync(hw, gssr) != IXGBE_SUCCESS)
+		status = IXGBE_ERR_SWFW_SYNC;
+
+	if (status == IXGBE_SUCCESS) {
+		/* Put the data in the MDI single read and write data register*/
+		IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data);
+
+		/* Setup and write the address cycle command */
+		command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
+			   (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+			   (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+			   (IXGBE_MSCA_ADDR_CYCLE | IXGBE_MSCA_MDI_COMMAND));
+
+		IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+		/*
+		 * Check every 10 usec to see if the address cycle completed.
+		 * The MDI Command bit will clear when the operation is
+		 * complete
+		 */
+		for (i = 0; i < timeout; i++) {
+			usec_delay(10);
+
+			command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+
+			if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) {
+				DEBUGFUNC("PHY address cmd didn't complete\n");
+				break;
+			}
+		}
+
+		if ((command & IXGBE_MSCA_MDI_COMMAND) != 0)
+			status = IXGBE_ERR_PHY;
+
+		if (status == IXGBE_SUCCESS) {
+			/*
+			 * Address cycle complete, setup and write the write
+			 * command
+			 */
+			command = ((reg_addr << IXGBE_MSCA_NP_ADDR_SHIFT)  |
+				   (device_type << IXGBE_MSCA_DEV_TYPE_SHIFT) |
+				   (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) |
+				   (IXGBE_MSCA_WRITE | IXGBE_MSCA_MDI_COMMAND));
+
+			IXGBE_WRITE_REG(hw, IXGBE_MSCA, command);
+
+			/*
+			 * Check every 10 usec to see if the address cycle
+			 * completed. The MDI Command bit will clear when the
+			 * operation is complete
+			 */
+			for (i = 0; i < timeout; i++) {
+				usec_delay(10);
+
+				command = IXGBE_READ_REG(hw, IXGBE_MSCA);
+
+				if ((command & IXGBE_MSCA_MDI_COMMAND) == 0) {
+					DEBUGFUNC("PHY write command did not "
+						  "complete.\n");
+					break;
+				}
+			}
+
+			if ((command & IXGBE_MSCA_MDI_COMMAND) != 0)
+				status = IXGBE_ERR_PHY;
+		}
+
+		ixgbe_release_swfw_sync(hw, gssr);
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_setup_phy_link - Restart PHY autoneg
+ *  @hw: pointer to hardware structure
+ *
+ *  Restart autonegotiation and PHY and waits for completion.
+ **/
+s32 ixgbe_setup_phy_link(struct ixgbe_hw *hw)
+{
+	return ixgbe_call_func(hw, ixgbe_func_setup_phy_link, (hw),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_check_phy_link - Determine link and speed status
+ *  @hw: pointer to hardware structure
+ *
+ *  Reads a PHY register to determine if link is up and the current speed for
+ *  the PHY.
+ **/
+s32 ixgbe_check_phy_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+			 bool *link_up)
+{
+	return ixgbe_call_func(hw, ixgbe_func_check_phy_link, (hw, speed,
+			       link_up), IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_setup_phy_link_speed - Set auto advertise
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg: TRUE if autonegotiation enabled
+ *
+ *  Sets the auto advertised capabilities
+ **/
+s32 ixgbe_setup_phy_link_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+			       bool autoneg,
+			       bool autoneg_wait_to_complete)
+{
+	return ixgbe_call_func(hw, ixgbe_func_setup_phy_link_speed, (hw, speed,
+			       autoneg, autoneg_wait_to_complete),
+			       IXGBE_NOT_IMPLEMENTED);
+}
+
+/**
+ *  ixgbe_setup_tnx_phy_link - Set and restart autoneg
+ *  @hw: pointer to hardware structure
+ *
+ *  Restart autonegotiation and PHY and waits for completion.
+ **/
+s32 ixgbe_setup_tnx_phy_link(struct ixgbe_hw *hw)
+{
+	s32 status = IXGBE_NOT_IMPLEMENTED;
+	u32 time_out;
+	u32 max_time_out = 10;
+	u16 autoneg_speed_selection_register = 0x10;
+	u16 autoneg_restart_mask = 0x0200;
+	u16 autoneg_complete_mask = 0x0020;
+	u16 autoneg_reg = 0;
+
+	/*
+	 * Set advertisement settings in PHY based on autoneg_advertised
+	 * settings. If autoneg_advertised = 0, then advertise default values
+	 * txn devices cannot be "forced" to a autoneg 10G and fail.  But can
+	 * for a 1G.
+	 */
+	ixgbe_read_phy_reg(hw,
+		  autoneg_speed_selection_register,
+		  IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+		  &autoneg_reg);
+
+	if (hw->phy.autoneg_advertised == IXGBE_LINK_SPEED_1GB_FULL)
+		autoneg_reg &= 0xEFFF; /* 0 in bit 12 is 1G operation */
+	else
+		autoneg_reg |= 0x1000; /* 1 in bit 12 is 10G/1G operation */
+
+	ixgbe_write_phy_reg(hw,
+		  autoneg_speed_selection_register,
+		  IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+		  autoneg_reg);
+
+
+	/* Restart PHY autonegotiation and wait for completion */
+	ixgbe_read_phy_reg(hw,
+		  IXGBE_MDIO_AUTO_NEG_CONTROL,
+		  IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+		  &autoneg_reg);
+
+	autoneg_reg |= autoneg_restart_mask;
+
+	ixgbe_write_phy_reg(hw,
+		  IXGBE_MDIO_AUTO_NEG_CONTROL,
+		  IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+		  autoneg_reg);
+
+	/* Wait for autonegotiation to finish */
+	for (time_out = 0; time_out < max_time_out; time_out++) {
+		usec_delay(10);
+		/* Restart PHY autonegotiation and wait for completion */
+		status = ixgbe_read_phy_reg(hw,
+					    IXGBE_MDIO_AUTO_NEG_STATUS,
+					    IXGBE_MDIO_AUTO_NEG_DEV_TYPE,
+					    &autoneg_reg);
+
+		autoneg_reg &= autoneg_complete_mask;
+		if (autoneg_reg == autoneg_complete_mask) {
+			status = IXGBE_SUCCESS;
+			break;
+		}
+	}
+
+	if (time_out == max_time_out)
+		status = IXGBE_ERR_LINK_SETUP;
+
+	return status;
+}
+
+/**
+ *  ixgbe_check_tnx_phy_link - Determine link and speed status
+ *  @hw: pointer to hardware structure
+ *
+ *  Reads the VS1 register to determine if link is up and the current speed for
+ *  the PHY.
+ **/
+s32 ixgbe_check_tnx_phy_link(struct ixgbe_hw *hw, ixgbe_link_speed *speed,
+			     bool *link_up)
+{
+	s32 status = IXGBE_SUCCESS;
+	u32 time_out;
+	u32 max_time_out = 10;
+	u16 phy_link = 0;
+	u16 phy_speed = 0;
+	u16 phy_data = 0;
+
+	/* Initialize speed and link to default case */
+	*link_up = FALSE;
+	*speed = IXGBE_LINK_SPEED_10GB_FULL;
+
+	/*
+	 * Check current speed and link status of the PHY register.
+	 * This is a vendor specific register and may have to
+	 * be changed for other copper PHYs.
+	 */
+	for (time_out = 0; time_out < max_time_out; time_out++) {
+		usec_delay(10);
+		if (phy_link == IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS) {
+			*link_up = TRUE;
+			if (phy_speed ==
+			    IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS)
+				*speed = IXGBE_LINK_SPEED_1GB_FULL;
+			break;
+		} else {
+			status = ixgbe_read_phy_reg(hw,
+				     IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS,
+				     IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE,
+				     &phy_data);
+			phy_link = phy_data &
+				IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS;
+			phy_speed = phy_data &
+				IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS;
+		}
+	}
+
+	return status;
+}
+
+/**
+ *  ixgbe_setup_tnx_phy_link_speed - Sets the auto advertised capabilities
+ *  @hw: pointer to hardware structure
+ *  @speed: new link speed
+ *  @autoneg: TRUE if autonegotiation enabled
+ **/
+s32 ixgbe_setup_tnx_phy_link_speed(struct ixgbe_hw *hw, ixgbe_link_speed speed,
+				   bool autoneg,
+				   bool autoneg_wait_to_complete)
+{
+	UNREFERENCED_PARAMETER(autoneg);
+	UNREFERENCED_PARAMETER(autoneg_wait_to_complete);
+
+	/*
+	 * Clear autoneg_advertised and set new values based on input link
+	 * speed.
+	 */
+	hw->phy.autoneg_advertised = 0;
+
+	if (speed & IXGBE_LINK_SPEED_10GB_FULL) {
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_10GB_FULL;
+	}
+	if (speed & IXGBE_LINK_SPEED_1GB_FULL) {
+		hw->phy.autoneg_advertised |= IXGBE_LINK_SPEED_1GB_FULL;
+	}
+
+	/* Setup link based on the new speed settings */
+	ixgbe_setup_tnx_phy_link(hw);
+
+	return IXGBE_SUCCESS;
+}
diff --git a/sys/dev/ixgbe/ixgbe_phy.h b/sys/dev/ixgbe/ixgbe_phy.h
new file mode 100644
index 0000000..9f04732
--- /dev/null
+++ b/sys/dev/ixgbe/ixgbe_phy.h
@@ -0,0 +1,70 @@
+/*******************************************************************************
+
+  Copyright (c) 2001-2007, Intel Corporation 
+  All rights reserved.
+  
+  Redistribution and use in source and binary forms, with or without 
+  modification, are permitted provided that the following conditions are met:
+  
+   1. Redistributions of source code must retain the above copyright notice, 
+      this list of conditions and the following disclaimer.
+  
+   2. Redistributions in binary form must reproduce the above copyright 
+      notice, this list of conditions and the following disclaimer in the 
+      documentation and/or other materials provided with the distribution.
+  
+   3. Neither the name of the Intel Corporation nor the names of its 
+      contributors may be used to endorse or promote products derived from 
+      this software without specific prior written permission.
+  
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+  POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+/* $FreeBSD$ */
+
+#ifndef _IXGBE_PHY_H_
+#define _IXGBE_PHY_H_
+
+#include "ixgbe_type.h"
+
+s32 ixgbe_init_shared_code_phy(struct ixgbe_hw *hw);
+s32 ixgbe_assign_func_pointers_phy(struct ixgbe_hw *hw);
+s32 ixgbe_setup_phy_link(struct ixgbe_hw *hw);
+s32 ixgbe_check_phy_link(struct ixgbe_hw *hw,
+			 ixgbe_link_speed *speed,
+			 bool *link_up);
+s32 ixgbe_setup_phy_link_speed(struct ixgbe_hw *hw,
+			       ixgbe_link_speed speed,
+			       bool autoneg,
+			       bool autoneg_wait_to_complete);
+bool ixgbe_validate_phy_addr(struct ixgbe_hw *hw, u32 phy_addr);
+enum ixgbe_phy_type ixgbe_get_phy_type_from_id(u32 phy_id);
+s32 ixgbe_get_phy_id(struct ixgbe_hw *hw);
+s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw);
+s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw);
+s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+			       u32 device_type, u16 *phy_data);
+s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
+				u32 device_type, u16 phy_data);
+
+/* PHY specific */
+s32 ixgbe_setup_tnx_phy_link(struct ixgbe_hw *hw);
+s32 ixgbe_check_tnx_phy_link(struct ixgbe_hw *hw,
+			     ixgbe_link_speed *speed,
+			     bool *link_up);
+s32 ixgbe_setup_tnx_phy_link_speed(struct ixgbe_hw *hw,
+				  ixgbe_link_speed speed,
+				  bool autoneg,
+				  bool autoneg_wait_to_complete);
+
+#endif /* _IXGBE_PHY_H_ */
diff --git a/sys/dev/ixgbe/ixgbe_type.h b/sys/dev/ixgbe/ixgbe_type.h
new file mode 100644
index 0000000..3168c3e
--- /dev/null
+++ b/sys/dev/ixgbe/ixgbe_type.h
@@ -0,0 +1,1412 @@
+/*******************************************************************************
+
+  Copyright (c) 2001-2007, Intel Corporation 
+  All rights reserved.
+  
+  Redistribution and use in source and binary forms, with or without 
+  modification, are permitted provided that the following conditions are met:
+  
+   1. Redistributions of source code must retain the above copyright notice, 
+      this list of conditions and the following disclaimer.
+  
+   2. Redistributions in binary form must reproduce the above copyright 
+      notice, this list of conditions and the following disclaimer in the 
+      documentation and/or other materials provided with the distribution.
+  
+   3. Neither the name of the Intel Corporation nor the names of its 
+      contributors may be used to endorse or promote products derived from 
+      this software without specific prior written permission.
+  
+  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+  AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
+  IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
+  ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 
+  LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 
+  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
+  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
+  INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
+  CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
+  ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+  POSSIBILITY OF SUCH DAMAGE.
+
+*******************************************************************************/
+/* $FreeBSD$ */
+
+#ifndef _IXGBE_TYPE_H_
+#define _IXGBE_TYPE_H_
+
+#include "ixgbe_osdep.h"
+
+/* Vendor ID */
+#define IXGBE_INTEL_VENDOR_ID   0x8086
+
+/* Device IDs */
+#define IXGBE_DEV_ID_82598               0x10B6
+#define IXGBE_DEV_ID_82598_FPGA          0xF0C0
+#define IXGBE_DEV_ID_82598AF_DUAL_PORT   0x10C6
+#define IXGBE_DEV_ID_82598AF_SINGLE_PORT 0x10C7
+#define IXGBE_DEV_ID_82598AT_DUAL_PORT   0x10C8
+
+/* General Registers */
+#define IXGBE_CTRL      0x00000
+#define IXGBE_STATUS    0x00008
+#define IXGBE_CTRL_EXT  0x00018
+#define IXGBE_ESDP      0x00020
+#define IXGBE_EODSDP    0x00028
+#define IXGBE_LEDCTL    0x00200
+#define IXGBE_FRTIMER   0x00048
+#define IXGBE_TCPTIMER  0x0004C
+
+/* NVM Registers */
+#define IXGBE_EEC       0x10010
+#define IXGBE_EERD      0x10014
+#define IXGBE_FLA       0x1001C
+#define IXGBE_EEMNGCTL  0x10110
+#define IXGBE_EEMNGDATA 0x10114
+#define IXGBE_FLMNGCTL  0x10118
+#define IXGBE_FLMNGDATA 0x1011C
+#define IXGBE_FLMNGCNT  0x10120
+#define IXGBE_FLOP      0x1013C
+#define IXGBE_GRC       0x10200
+
+/* Interrupt Registers */
+#define IXGBE_EICR      0x00800
+#define IXGBE_EICS      0x00808
+#define IXGBE_EIMS      0x00880
+#define IXGBE_EIMC      0x00888
+#define IXGBE_EIAC      0x00810
+#define IXGBE_EIAM      0x00890
+#define IXGBE_EITR(_i) (0x00820 + ((_i) * 4)) /* 0x820-0x86c */
+#define IXGBE_IVAR(_i) (0x00900 + ((_i) * 4)) /* 24 at 0x900-0x960 */
+#define IXGBE_MSIXT     0x00000 /* MSI-X Table. 0x0000 - 0x01C */
+#define IXGBE_MSIXPBA   0x02000 /* MSI-X Pending bit array */
+#define IXGBE_PBACL     0x11068
+#define IXGBE_GPIE      0x00898
+
+/* Flow Control Registers */
+#define IXGBE_PFCTOP    0x03008
+#define IXGBE_FCTTV(_i) (0x03200 + ((_i) * 4)) /* 4 of these (0-3) */
+#define IXGBE_FCRTL(_i) (0x03220 + ((_i) * 8)) /* 8 of these (0-7) */
+#define IXGBE_FCRTH(_i) (0x03260 + ((_i) * 8)) /* 8 of these (0-7) */
+#define IXGBE_FCRTV     0x032A0
+#define IXGBE_TFCS      0x0CE00
+
+/* Receive DMA Registers */
+#define IXGBE_RDBAL(_i) (0x01000 + ((_i) * 0x40)) /* 64 of each (0-63)*/
+#define IXGBE_RDBAH(_i) (0x01004 + ((_i) * 0x40))
+#define IXGBE_RDLEN(_i) (0x01008 + ((_i) * 0x40))
+#define IXGBE_RDH(_i)   (0x01010 + ((_i) * 0x40))
+#define IXGBE_RDT(_i)   (0x01018 + ((_i) * 0x40))
+#define IXGBE_RXDCTL(_i) (0x01028 + ((_i) * 0x40))
+#define IXGBE_SRRCTL(_i) (0x02100 + ((_i) * 4))
+					     /* array of 16 (0x02100-0x0213C) */
+#define IXGBE_DCA_RXCTRL(_i)    (0x02200 + ((_i) * 4))
+					     /* array of 16 (0x02200-0x0223C) */
+#define IXGBE_RDRXCTL    0x02F00
+#define IXGBE_RXPBSIZE(_i)      (0x03C00 + ((_i) * 4))
+					     /* 8 of these 0x03C00 - 0x03C1C */
+#define IXGBE_RXCTRL    0x03000
+#define IXGBE_DROPEN    0x03D04
+#define IXGBE_RXPBSIZE_SHIFT 10
+
+/* Receive Registers */
+#define IXGBE_RXCSUM    0x05000
+#define IXGBE_RFCTL     0x05008
+#define IXGBE_MTA(_i)   (0x05200 + ((_i) * 4))
+				   /* Multicast Table Array - 128 entries */
+#define IXGBE_RAL(_i)   (0x05400 + ((_i) * 8)) /* 16 of these (0-15) */
+#define IXGBE_RAH(_i)   (0x05404 + ((_i) * 8)) /* 16 of these (0-15) */
+#define IXGBE_PSRTYPE   0x05480
+				   /* 0x5480-0x54BC Packet split receive type */
+#define IXGBE_VFTA(_i)  (0x0A000 + ((_i) * 4))
+					 /* array of 4096 1-bit vlan filters */
+#define IXGBE_VFTAVIND(_j, _i)  (0x0A200 + ((_j) * 0x200) + ((_i) * 4))
+				     /*array of 4096 4-bit vlan vmdq indicies */
+#define IXGBE_FCTRL     0x05080
+#define IXGBE_VLNCTRL   0x05088
+#define IXGBE_MCSTCTRL  0x05090
+#define IXGBE_MRQC      0x05818
+#define IXGBE_VMD_CTL   0x0581C
+#define IXGBE_IMIR(_i)  (0x05A80 + ((_i) * 4))  /* 8 of these (0-7) */
+#define IXGBE_IMIREXT(_i)       (0x05AA0 + ((_i) * 4))  /* 8 of these (0-7) */
+#define IXGBE_IMIRVP    0x05AC0
+#define IXGBE_RETA(_i)  (0x05C00 + ((_i) * 4))  /* 32 of these (0-31) */
+#define IXGBE_RSSRK(_i) (0x05C80 + ((_i) * 4))  /* 10 of these (0-9) */
+
+/* Transmit DMA registers */
+#define IXGBE_TDBAL(_i) (0x06000 + ((_i) * 0x40))/* 32 of these (0-31)*/
+#define IXGBE_TDBAH(_i) (0x06004 + ((_i) * 0x40))
+#define IXGBE_TDLEN(_i) (0x06008 + ((_i) * 0x40))
+#define IXGBE_TDH(_i)   (0x06010 + ((_i) * 0x40))
+#define IXGBE_TDT(_i)   (0x06018 + ((_i) * 0x40))
+#define IXGBE_TXDCTL(_i) (0x06028 + ((_i) * 0x40))
+#define IXGBE_TDWBAL(_i) (0x06038 + ((_i) * 0x40))
+#define IXGBE_TDWBAH(_i) (0x0603C + ((_i) * 0x40))
+#define IXGBE_DTXCTL    0x07E00
+#define IXGBE_DCA_TXCTRL(_i)    (0x07200 + ((_i) * 4))
+					      /* there are 16 of these (0-15) */
+#define IXGBE_TIPG      0x0CB00
+#define IXGBE_TXPBSIZE(_i)      (0x0CC00 + ((_i) *0x04))
+						      /* there are 8 of these */
+#define IXGBE_MNGTXMAP  0x0CD10
+#define IXGBE_TIPG_FIBER_DEFAULT 3
+#define IXGBE_TXPBSIZE_SHIFT    10
+
+/* Wake up registers */
+#define IXGBE_WUC       0x05800
+#define IXGBE_WUFC      0x05808
+#define IXGBE_WUS       0x05810
+#define IXGBE_IPAV      0x05838
+#define IXGBE_IP4AT     0x05840 /* IPv4 table 0x5840-0x5858 */
+#define IXGBE_IP6AT     0x05880 /* IPv6 table 0x5880-0x588F */
+#define IXGBE_WUPL      0x05900
+#define IXGBE_WUPM      0x05A00 /* wake up pkt memory 0x5A00-0x5A7C */
+#define IXGBE_FHFT      0x09000 /* Flex host filter table 9000-93FC */
+
+/* Music registers */
+#define IXGBE_RMCS      0x03D00
+#define IXGBE_DPMCS     0x07F40
+#define IXGBE_PDPMCS    0x0CD00
+#define IXGBE_RUPPBMR   0x050A0
+#define IXGBE_RT2CR(_i) (0x03C20 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_RT2SR(_i) (0x03C40 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_TDTQ2TCCR(_i)     (0x0602C + ((_i) * 0x40)) /* 8 of these (0-7) */
+#define IXGBE_TDTQ2TCSR(_i)     (0x0622C + ((_i) * 0x40)) /* 8 of these (0-7) */
+#define IXGBE_TDPT2TCCR(_i)     (0x0CD20 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_TDPT2TCSR(_i)     (0x0CD40 + ((_i) * 4)) /* 8 of these (0-7) */
+
+/* Stats registers */
+#define IXGBE_CRCERRS   0x04000
+#define IXGBE_ILLERRC   0x04004
+#define IXGBE_ERRBC     0x04008
+#define IXGBE_MSPDC     0x04010
+#define IXGBE_MPC(_i)   (0x03FA0 + ((_i) * 4)) /* 8 of these 3FA0-3FBC*/
+#define IXGBE_MLFC      0x04034
+#define IXGBE_MRFC      0x04038
+#define IXGBE_RLEC      0x04040
+#define IXGBE_LXONTXC   0x03F60
+#define IXGBE_LXONRXC   0x0CF60
+#define IXGBE_LXOFFTXC  0x03F68
+#define IXGBE_LXOFFRXC  0x0CF68
+#define IXGBE_PXONTXC(_i)       (0x03F00 + ((_i) * 4)) /* 8 of these 3F00-3F1C*/
+#define IXGBE_PXONRXC(_i)       (0x0CF00 + ((_i) * 4)) /* 8 of these CF00-CF1C*/
+#define IXGBE_PXOFFTXC(_i)      (0x03F20 + ((_i) * 4)) /* 8 of these 3F20-3F3C*/
+#define IXGBE_PXOFFRXC(_i)      (0x0CF20 + ((_i) * 4)) /* 8 of these CF20-CF3C*/
+#define IXGBE_PRC64     0x0405C
+#define IXGBE_PRC127    0x04060
+#define IXGBE_PRC255    0x04064
+#define IXGBE_PRC511    0x04068
+#define IXGBE_PRC1023   0x0406C
+#define IXGBE_PRC1522   0x04070
+#define IXGBE_GPRC      0x04074
+#define IXGBE_BPRC      0x04078
+#define IXGBE_MPRC      0x0407C
+#define IXGBE_GPTC      0x04080
+#define IXGBE_GORCL     0x04088
+#define IXGBE_GORCH     0x0408C
+#define IXGBE_GOTCL     0x04090
+#define IXGBE_GOTCH     0x04094
+#define IXGBE_RNBC(_i)  (0x03FC0 + ((_i) * 4)) /* 8 of these 3FC0-3FDC*/
+#define IXGBE_RUC       0x040A4
+#define IXGBE_RFC       0x040A8
+#define IXGBE_ROC       0x040AC
+#define IXGBE_RJC       0x040B0
+#define IXGBE_MNGPRC    0x040B4
+#define IXGBE_MNGPDC    0x040B8
+#define IXGBE_MNGPTC    0x0CF90
+#define IXGBE_TORL      0x040C0
+#define IXGBE_TORH      0x040C4
+#define IXGBE_TPR       0x040D0
+#define IXGBE_TPT       0x040D4
+#define IXGBE_PTC64     0x040D8
+#define IXGBE_PTC127    0x040DC
+#define IXGBE_PTC255    0x040E0
+#define IXGBE_PTC511    0x040E4
+#define IXGBE_PTC1023   0x040E8
+#define IXGBE_PTC1522   0x040EC
+#define IXGBE_MPTC      0x040F0
+#define IXGBE_BPTC      0x040F4
+#define IXGBE_XEC       0x04120
+
+#define IXGBE_RQSMR(_i) (0x02300 + ((_i) * 4)) /* 16 of these */
+#define IXGBE_TQSMR(_i) (0x07300 + ((_i) * 4)) /* 8 of these */
+
+#define IXGBE_QPRC(_i) (0x01030 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QPTC(_i) (0x06030 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QBRC(_i) (0x01034 + ((_i) * 0x40)) /* 16 of these */
+#define IXGBE_QBTC(_i) (0x06034 + ((_i) * 0x40)) /* 16 of these */
+
+/* Management */
+#define IXGBE_MAVTV(_i) (0x05010 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_MFUTP(_i) (0x05030 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_MANC      0x05820
+#define IXGBE_MFVAL     0x05824
+#define IXGBE_MANC2H    0x05860
+#define IXGBE_MDEF(_i)  (0x05890 + ((_i) * 4)) /* 8 of these (0-7) */
+#define IXGBE_MIPAF     0x058B0
+#define IXGBE_MMAL(_i)  (0x05910 + ((_i) * 8)) /* 4 of these (0-3) */
+#define IXGBE_MMAH(_i)  (0x05914 + ((_i) * 8)) /* 4 of these (0-3) */
+#define IXGBE_FTFT      0x09400 /* 0x9400-0x97FC */
+
+/* ARC Subsystem registers */
+#define IXGBE_HICR      0x15F00
+#define IXGBE_FWSTS     0x15F0C
+#define IXGBE_HSMC0R    0x15F04
+#define IXGBE_HSMC1R    0x15F08
+#define IXGBE_SWSR      0x15F10
+#define IXGBE_HFDR      0x15FE8
+#define IXGBE_FLEX_MNG  0x15800 /* 0x15800 - 0x15EFC */
+
+/* PCI-E registers */
+#define IXGBE_GCR       0x11000
+#define IXGBE_GTV       0x11004
+#define IXGBE_FUNCTAG   0x11008
+#define IXGBE_GLT       0x1100C
+#define IXGBE_GSCL_1    0x11010
+#define IXGBE_GSCL_2    0x11014
+#define IXGBE_GSCL_3    0x11018
+#define IXGBE_GSCL_4    0x1101C
+#define IXGBE_GSCN_0    0x11020
+#define IXGBE_GSCN_1    0x11024
+#define IXGBE_GSCN_2    0x11028
+#define IXGBE_GSCN_3    0x1102C
+#define IXGBE_FACTPS    0x10150
+#define IXGBE_PCIEANACTL  0x11040
+#define IXGBE_SWSM      0x10140
+#define IXGBE_FWSM      0x10148
+#define IXGBE_GSSR      0x10160
+#define IXGBE_MREVID    0x11064
+#define IXGBE_DCA_ID    0x11070
+#define IXGBE_DCA_CTRL  0x11074
+
+/* Diagnostic Registers */
+#define IXGBE_RDSTATCTL 0x02C20
+#define IXGBE_RDSTAT(_i) (0x02C00 + ((_i) * 4)) /* 0x02C00-0x02C1C */
+#define IXGBE_RDHMPN    0x02F08
+#define IXGBE_RIC_DW0   0x02F10
+#define IXGBE_RIC_DW1   0x02F14
+#define IXGBE_RIC_DW2   0x02F18
+#define IXGBE_RIC_DW3   0x02F1C
+#define IXGBE_RDPROBE   0x02F20
+#define IXGBE_TDSTATCTL 0x07C20
+#define IXGBE_TDSTAT(_i) (0x07C00 + ((_i) * 4)) /* 0x07C00 - 0x07C1C */
+#define IXGBE_TDHMPN    0x07F08
+#define IXGBE_TIC_DW0   0x07F10
+#define IXGBE_TIC_DW1   0x07F14
+#define IXGBE_TIC_DW2   0x07F18
+#define IXGBE_TIC_DW3   0x07F1C
+#define IXGBE_TDPROBE   0x07F20
+#define IXGBE_TXBUFCTRL 0x0C600
+#define IXGBE_TXBUFDATA0  0x0C610
+#define IXGBE_TXBUFDATA1  0x0C614
+#define IXGBE_TXBUFDATA2  0x0C618
+#define IXGBE_TXBUFDATA3  0x0C61C
+#define IXGBE_RXBUFCTRL   0x03600
+#define IXGBE_RXBUFDATA0  0x03610
+#define IXGBE_RXBUFDATA1  0x03614
+#define IXGBE_RXBUFDATA2  0x03618
+#define IXGBE_RXBUFDATA3  0x0361C
+#define IXGBE_PCIE_DIAG(_i)     (0x11090 + ((_i) * 4)) /* 8 of these */
+#define IXGBE_RFVAL     0x050A4
+#define IXGBE_MDFTC1    0x042B8
+#define IXGBE_MDFTC2    0x042C0
+#define IXGBE_MDFTFIFO1 0x042C4
+#define IXGBE_MDFTFIFO2 0x042C8
+#define IXGBE_MDFTS     0x042CC
+#define IXGBE_RXDATAWRPTR(_i)   (0x03700 + ((_i) * 4)) /* 8 of these 3700-370C*/
+#define IXGBE_RXDESCWRPTR(_i)   (0x03710 + ((_i) * 4)) /* 8 of these 3710-371C*/
+#define IXGBE_RXDATARDPTR(_i)   (0x03720 + ((_i) * 4)) /* 8 of these 3720-372C*/
+#define IXGBE_RXDESCRDPTR(_i)   (0x03730 + ((_i) * 4)) /* 8 of these 3730-373C*/
+#define IXGBE_TXDATAWRPTR(_i)   (0x0C700 + ((_i) * 4)) /* 8 of these C700-C70C*/
+#define IXGBE_TXDESCWRPTR(_i)   (0x0C710 + ((_i) * 4)) /* 8 of these C710-C71C*/
+#define IXGBE_TXDATARDPTR(_i)   (0x0C720 + ((_i) * 4)) /* 8 of these C720-C72C*/
+#define IXGBE_TXDESCRDPTR(_i)   (0x0C730 + ((_i) * 4)) /* 8 of these C730-C73C*/
+#define IXGBE_PCIEECCCTL 0x1106C
+#define IXGBE_PBTXECC   0x0C300
+#define IXGBE_PBRXECC   0x03300
+#define IXGBE_GHECCR    0x110B0
+
+/* MAC Registers */
+#define IXGBE_PCS1GCFIG 0x04200
+#define IXGBE_PCS1GLCTL 0x04208
+#define IXGBE_PCS1GLSTA 0x0420C
+#define IXGBE_PCS1GDBG0 0x04210
+#define IXGBE_PCS1GDBG1 0x04214
+#define IXGBE_PCS1GANA  0x04218
+#define IXGBE_PCS1GANLP 0x0421C
+#define IXGBE_PCS1GANNP 0x04220
+#define IXGBE_PCS1GANLPNP 0x04224
+#define IXGBE_HLREG0    0x04240
+#define IXGBE_HLREG1    0x04244
+#define IXGBE_PAP       0x04248
+#define IXGBE_MACA      0x0424C
+#define IXGBE_APAE      0x04250
+#define IXGBE_ARD       0x04254
+#define IXGBE_AIS       0x04258
+#define IXGBE_MSCA      0x0425C
+#define IXGBE_MSRWD     0x04260
+#define IXGBE_MLADD     0x04264
+#define IXGBE_MHADD     0x04268
+#define IXGBE_TREG      0x0426C
+#define IXGBE_PCSS1     0x04288
+#define IXGBE_PCSS2     0x0428C
+#define IXGBE_XPCSS     0x04290
+#define IXGBE_SERDESC   0x04298
+#define IXGBE_MACS      0x0429C
+#define IXGBE_AUTOC     0x042A0
+#define IXGBE_LINKS     0x042A4
+#define IXGBE_AUTOC2    0x042A8
+#define IXGBE_AUTOC3    0x042AC
+#define IXGBE_ANLP1     0x042B0
+#define IXGBE_ANLP2     0x042B4
+#define IXGBE_ATLASCTL  0x04800
+
+
+/* CTRL Bit Masks */
+#define IXGBE_CTRL_GIO_DIS      0x00000004 /* Global IO Master Disable bit */
+#define IXGBE_CTRL_LNK_RST      0x00000008 /* Link Reset. Resets everything. */
+#define IXGBE_CTRL_RST          0x04000000 /* Reset (SW) */
+
+/* FACTPS */
+#define IXGBE_FACTPS_LFS        0x40000000 /* LAN Function Select */
+
+/* MHADD Bit Masks */
+#define IXGBE_MHADD_MFS_MASK    0xFFFF0000
+#define IXGBE_MHADD_MFS_SHIFT   16
+
+/* Extended Device Control */
+#define IXGBE_CTRL_EXT_NS_DIS   0x00010000 /* No Snoop disable */
+#define IXGBE_CTRL_EXT_RO_DIS   0x00020000 /* Relaxed Ordering disable */
+#define IXGBE_CTRL_EXT_DRV_LOAD 0x10000000 /* Driver loaded bit for FW */
+
+/* Direct Cache Access (DCA) definitions */
+#define IXGBE_DCA_CTRL_DCA_ENABLE  0x00000000 /* DCA Enable */
+#define IXGBE_DCA_CTRL_DCA_DISABLE 0x00000001 /* DCA Disable */
+
+#define IXGBE_DCA_CTRL_DCA_MODE_CB1 0x00 /* DCA Mode CB1 */
+#define IXGBE_DCA_CTRL_DCA_MODE_CB2 0x02 /* DCA Mode CB2 */
+
+#define IXGBE_DCA_RXCTRL_CPUID_MASK 0x0000001F /* Rx CPUID Mask */
+#define IXGBE_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */
+#define IXGBE_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header enable */
+#define IXGBE_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload enable */
+
+#define IXGBE_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */
+#define IXGBE_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */
+
+/* MSCA Bit Masks */
+#define IXGBE_MSCA_NP_ADDR_MASK      0x0000FFFF /* MDI Address (new protocol) */
+#define IXGBE_MSCA_NP_ADDR_SHIFT     0
+#define IXGBE_MSCA_DEV_TYPE_MASK     0x001F0000 /* Device Type (new protocol) */
+#define IXGBE_MSCA_DEV_TYPE_SHIFT    16 /* Register Address (old protocol */
+#define IXGBE_MSCA_PHY_ADDR_MASK     0x03E00000 /* PHY Address mask */
+#define IXGBE_MSCA_PHY_ADDR_SHIFT    21 /* PHY Address shift*/
+#define IXGBE_MSCA_OP_CODE_MASK      0x0C000000 /* OP CODE mask */
+#define IXGBE_MSCA_OP_CODE_SHIFT     26 /* OP CODE shift */
+#define IXGBE_MSCA_ADDR_CYCLE        0x00000000 /* OP CODE 00 (addr cycle) */
+#define IXGBE_MSCA_WRITE             0x04000000 /* OP CODE 01 (write) */
+#define IXGBE_MSCA_READ              0x08000000 /* OP CODE 10 (read) */
+#define IXGBE_MSCA_READ_AUTOINC      0x0C000000 /* OP CODE 11 (read, auto inc)*/
+#define IXGBE_MSCA_ST_CODE_MASK      0x30000000 /* ST Code mask */
+#define IXGBE_MSCA_ST_CODE_SHIFT     28 /* ST Code shift */
+#define IXGBE_MSCA_NEW_PROTOCOL      0x00000000 /* ST CODE 00 (new protocol) */
+#define IXGBE_MSCA_OLD_PROTOCOL      0x10000000 /* ST CODE 01 (old protocol) */
+#define IXGBE_MSCA_MDI_COMMAND       0x40000000 /* Initiate MDI command */
+#define IXGBE_MSCA_MDI_IN_PROG_EN    0x80000000 /* MDI in progress enable */
+
+/* MSRWD bit masks */
+#define IXGBE_MSRWD_WRITE_DATA_MASK  0x0000FFFF
+#define IXGBE_MSRWD_WRITE_DATA_SHIFT 0
+#define IXGBE_MSRWD_READ_DATA_MASK   0xFFFF0000
+#define IXGBE_MSRWD_READ_DATA_SHIFT  16
+
+/* Device Type definitions for new protocol MDIO commands */
+#define IXGBE_MDIO_PMA_PMD_DEV_TYPE               0x1
+#define IXGBE_MDIO_PCS_DEV_TYPE                   0x3
+#define IXGBE_MDIO_PHY_XS_DEV_TYPE                0x4
+#define IXGBE_MDIO_AUTO_NEG_DEV_TYPE              0x7
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE     0x1E   /* Device 30 */
+
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_CONTROL      0x0    /* VS1 Control Reg */
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_STATUS       0x1    /* VS1 Status Reg */
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_LINK_STATUS  0x0008 /* 1 = Link Up */
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_SPEED_STATUS 0x0010 /* 0 - 10G, 1 - 1G */
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_10G_SPEED    0x0018
+#define IXGBE_MDIO_VENDOR_SPECIFIC_1_1G_SPEED     0x0010
+
+#define IXGBE_MDIO_AUTO_NEG_CONTROL    0x0 /* AUTO_NEG Control Reg */
+#define IXGBE_MDIO_AUTO_NEG_STATUS     0x1 /* AUTO_NEG Status Reg */
+#define IXGBE_MDIO_PHY_XS_CONTROL      0x0 /* PHY_XS Control Reg */
+#define IXGBE_MDIO_PHY_XS_RESET        0x8000 /* PHY_XS Reset */
+#define IXGBE_MDIO_PHY_ID_HIGH         0x2 /* PHY ID High Reg*/
+#define IXGBE_MDIO_PHY_ID_LOW          0x3 /* PHY ID Low Reg*/
+#define IXGBE_MDIO_PHY_SPEED_ABILITY   0x4 /* Speed Abilty Reg */
+#define IXGBE_MDIO_PHY_SPEED_10G       0x0001 /* 10G capable */
+#define IXGBE_MDIO_PHY_SPEED_1G        0x0010 /* 1G capable */
+
+#define IXGBE_PHY_REVISION_MASK        0xFFFFFFF0
+#define IXGBE_MAX_PHY_ADDR             32
+
+/* PHY IDs*/
+#define TN1010_PHY_ID    0x00A19410
+#define QT2022_PHY_ID    0x0043A400
+
+/* General purpose Interrupt Enable */
+#define IXGBE_GPIE_MSIX_MODE      0x00000010 /* MSI-X mode */
+#define IXGBE_GPIE_OCD            0x00000020 /* Other Clear Disable */
+#define IXGBE_GPIE_EIMEN          0x00000040 /* Immediate Interrupt Enable */
+#define IXGBE_GPIE_EIAME          0x40000000
+#define IXGBE_GPIE_PBA_SUPPORT    0x80000000
+
+/* Transmit Flow Control status */
+#define IXGBE_TFCS_TXOFF         0x00000001
+#define IXGBE_TFCS_TXOFF0        0x00000100
+#define IXGBE_TFCS_TXOFF1        0x00000200
+#define IXGBE_TFCS_TXOFF2        0x00000400
+#define IXGBE_TFCS_TXOFF3        0x00000800
+#define IXGBE_TFCS_TXOFF4        0x00001000
+#define IXGBE_TFCS_TXOFF5        0x00002000
+#define IXGBE_TFCS_TXOFF6        0x00004000
+#define IXGBE_TFCS_TXOFF7        0x00008000
+
+/* TCP Timer */
+#define IXGBE_TCPTIMER_KS            0x00000100
+#define IXGBE_TCPTIMER_COUNT_ENABLE  0x00000200
+#define IXGBE_TCPTIMER_COUNT_FINISH  0x00000400
+#define IXGBE_TCPTIMER_LOOP          0x00000800
+#define IXGBE_TCPTIMER_DURATION_MASK 0x000000FF
+
+/* HLREG0 Bit Masks */
+#define IXGBE_HLREG0_TXCRCEN      0x00000001   /* bit  0 */
+#define IXGBE_HLREG0_RXCRCSTRP    0x00000002   /* bit  1 */
+#define IXGBE_HLREG0_JUMBOEN      0x00000004   /* bit  2 */
+#define IXGBE_HLREG0_TXPADEN      0x00000400   /* bit 10 */
+#define IXGBE_HLREG0_TXPAUSEEN    0x00001000   /* bit 12 */
+#define IXGBE_HLREG0_RXPAUSEEN    0x00004000   /* bit 14 */
+#define IXGBE_HLREG0_LPBK         0x00008000   /* bit 15 */
+#define IXGBE_HLREG0_MDCSPD       0x00010000   /* bit 16 */
+#define IXGBE_HLREG0_CONTMDC      0x00020000   /* bit 17 */
+#define IXGBE_HLREG0_CTRLFLTR     0x00040000   /* bit 18 */
+#define IXGBE_HLREG0_PREPEND      0x00F00000   /* bits 20-23 */
+#define IXGBE_HLREG0_PRIPAUSEEN   0x01000000   /* bit 24 */
+#define IXGBE_HLREG0_RXPAUSERECDA 0x06000000   /* bits 25-26 */
+#define IXGBE_HLREG0_RXLNGTHERREN 0x08000000   /* bit 27 */
+#define IXGBE_HLREG0_RXPADSTRIPEN 0x10000000   /* bit 28 */
+
+/* VMD_CTL bitmasks */
+#define IXGBE_VMD_CTL_VMDQ_EN     0x00000001
+#define IXGBE_VMD_CTL_VMDQ_FILTER 0x00000002
+
+/* RDHMPN and TDHMPN bitmasks */
+#define IXGBE_RDHMPN_RDICADDR       0x007FF800
+#define IXGBE_RDHMPN_RDICRDREQ      0x00800000
+#define IXGBE_RDHMPN_RDICADDR_SHIFT 11
+#define IXGBE_TDHMPN_TDICADDR       0x003FF800
+#define IXGBE_TDHMPN_TDICRDREQ      0x00800000
+#define IXGBE_TDHMPN_TDICADDR_SHIFT 11
+
+/* Receive Checksum Control */
+#define IXGBE_RXCSUM_IPPCSE     0x00001000   /* IP payload checksum enable */
+#define IXGBE_RXCSUM_PCSD       0x00002000   /* packet checksum disabled */
+
+/* FCRTL Bit Masks */
+#define IXGBE_FCRTL_XONE        0x80000000  /* bit 31, XON enable */
+#define IXGBE_FCRTH_FCEN        0x80000000  /* Rx Flow control enable */
+
+/* PAP bit masks*/
+#define IXGBE_PAP_TXPAUSECNT_MASK   0x0000FFFF /* Pause counter mask */
+
+/* RMCS Bit Masks */
+#define IXGBE_RMCS_RRM          0x00000002 /* Receive Recylce Mode enable */
+/* Receive Arbitration Control: 0 Round Robin, 1 DFP */
+#define IXGBE_RMCS_RAC          0x00000004
+#define IXGBE_RMCS_DFP          IXGBE_RMCS_RAC /* Deficit Fixed Priority ena */
+#define IXGBE_RMCS_TFCE_802_3X  0x00000008 /* Tx Priority flow control ena */
+#define IXGBE_RMCS_TFCE_PRIORITY 0x00000010 /* Tx Priority flow control ena */
+#define IXGBE_RMCS_ARBDIS       0x00000040 /* Arbitration disable bit */
+
+/* Interrupt register bitmasks */
+
+/* Extended Interrupt Cause Read */
+#define IXGBE_EICR_RTX_QUEUE    0x0000FFFF /* RTx Queue Interrupt */
+#define IXGBE_EICR_LSC          0x00100000 /* Link Status Change */
+#define IXGBE_EICR_MNG          0x00400000 /* Managability Event Interrupt */
+#define IXGBE_EICR_PBUR         0x10000000 /* Packet Buffer Handler Error */
+#define IXGBE_EICR_DHER         0x20000000 /* Descriptor Handler Error */
+#define IXGBE_EICR_TCP_TIMER    0x40000000 /* TCP Timer */
+#define IXGBE_EICR_OTHER        0x80000000 /* Interrupt Cause Active */
+
+/* Extended Interrupt Cause Set */
+#define IXGBE_EICS_RTX_QUEUE    IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
+#define IXGBE_EICS_LSC          IXGBE_EICR_LSC /* Link Status Change */
+#define IXGBE_EICR_GPI_SDP0     0x01000000 /* Gen Purpose Interrupt on SDP0 */
+#define IXGBE_EICS_MNG          IXGBE_EICR_MNG /* MNG Event Interrupt */
+#define IXGBE_EICS_PBUR         IXGBE_EICR_PBUR /* Pkt Buf Handler Error */
+#define IXGBE_EICS_DHER         IXGBE_EICR_DHER /* Desc Handler Error */
+#define IXGBE_EICS_TCP_TIMER    IXGBE_EICR_TCP_TIMER /* TCP Timer */
+#define IXGBE_EICS_OTHER        IXGBE_EICR_OTHER     /* INT Cause Active */
+
+/* Extended Interrupt Mask Set */
+#define IXGBE_EIMS_RTX_QUEUE    IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
+#define IXGBE_EIMS_LSC          IXGBE_EICR_LSC       /* Link Status Change */
+#define IXGBE_EIMS_MNG          IXGBE_EICR_MNG       /* MNG Event Interrupt */
+#define IXGBE_EIMS_PBUR         IXGBE_EICR_PBUR      /* Pkt Buf Handler Error */
+#define IXGBE_EIMS_DHER         IXGBE_EICR_DHER      /* Descr Handler Error */
+#define IXGBE_EIMS_TCP_TIMER    IXGBE_EICR_TCP_TIMER /* TCP Timer */
+#define IXGBE_EIMS_OTHER        IXGBE_EICR_OTHER     /* INT Cause Active */
+
+/* Extended Interrupt Mask Clear */
+#define IXGBE_EIMC_RTX_QUEUE    IXGBE_EICR_RTX_QUEUE /* RTx Queue Interrupt */
+#define IXGBE_EIMC_LSC          IXGBE_EICR_LSC       /* Link Status Change */
+#define IXGBE_EIMC_MNG          IXGBE_EICR_MNG       /* MNG Event Interrupt */
+#define IXGBE_EIMC_PBUR         IXGBE_EICR_PBUR      /* Pkt Buf Handler Error */
+#define IXGBE_EIMC_DHER         IXGBE_EICR_DHER      /* Desc Handler Error */
+#define IXGBE_EIMC_TCP_TIMER    IXGBE_EICR_TCP_TIMER /* TCP Timer */
+#define IXGBE_EIMC_OTHER        IXGBE_EICR_OTHER     /* INT Cause Active */
+
+#define IXGBE_EIMS_ENABLE_MASK ( \
+				IXGBE_EIMS_RTX_QUEUE       | \
+				IXGBE_EIMS_LSC             | \
+				IXGBE_EIMS_TCP_TIMER       | \
+				IXGBE_EIMS_OTHER)
+
+/* Immediate Interrupt RX (A.K.A. Low Latency Interrupt) */
+#define IXGBE_IMIR_PORT_IM_EN     0x00010000  /* TCP port enable */
+#define IXGBE_IMIR_PORT_BP        0x00020000  /* TCP port check bypass */
+#define IXGBE_IMIREXT_SIZE_BP     0x00001000  /* Packet size bypass */
+#define IXGBE_IMIREXT_CTRL_URG    0x00002000  /* Check URG bit in header */
+#define IXGBE_IMIREXT_CTRL_ACK    0x00004000  /* Check ACK bit in header */
+#define IXGBE_IMIREXT_CTRL_PSH    0x00008000  /* Check PSH bit in header */
+#define IXGBE_IMIREXT_CTRL_RST    0x00010000  /* Check RST bit in header */
+#define IXGBE_IMIREXT_CTRL_SYN    0x00020000  /* Check SYN bit in header */
+#define IXGBE_IMIREXT_CTRL_FIN    0x00040000  /* Check FIN bit in header */
+#define IXGBE_IMIREXT_CTRL_BP     0x00080000  /* Bypass check of control bits */
+
+/* Interrupt clear mask */
+#define IXGBE_IRQ_CLEAR_MASK    0xFFFFFFFF
+
+/* Interrupt Vector Allocation Registers */
+#define IXGBE_IVAR_REG_NUM      25
+#define IXGBE_IVAR_TXRX_ENTRY   96
+#define IXGBE_IVAR_RX_ENTRY     64
+#define IXGBE_IVAR_RX_QUEUE(_i)    (0 + (_i))
+#define IXGBE_IVAR_TX_QUEUE(_i)    (64 + (_i))
+#define IXGBE_IVAR_TX_ENTRY     32
+
+#define IXGBE_IVAR_TCP_TIMER_INDEX       96 /* 0 based index */
+#define IXGBE_IVAR_OTHER_CAUSES_INDEX    97 /* 0 based index */
+
+#define IXGBE_MSIX_VECTOR(_i)   (0 + (_i))
+
+#define IXGBE_IVAR_ALLOC_VAL    0x80 /* Interrupt Allocation valid */
+
+/* VLAN Control Bit Masks */
+#define IXGBE_VLNCTRL_VET       0x0000FFFF  /* bits 0-15 */
+#define IXGBE_VLNCTRL_CFI       0x10000000  /* bit 28 */
+#define IXGBE_VLNCTRL_CFIEN     0x20000000  /* bit 29 */
+#define IXGBE_VLNCTRL_VFE       0x40000000  /* bit 30 */
+#define IXGBE_VLNCTRL_VME       0x80000000  /* bit 31 */
+
+#define IXGBE_ETHERNET_IEEE_VLAN_TYPE 0x8100  /* 802.1q protocol */
+
+/* STATUS Bit Masks */
+#define IXGBE_STATUS_LAN_ID     0x0000000C /* LAN ID */
+#define IXGBE_STATUS_GIO        0x00080000 /* GIO Master Enable Status */
+
+#define IXGBE_STATUS_LAN_ID_0   0x00000000 /* LAN ID 0 */
+#define IXGBE_STATUS_LAN_ID_1   0x00000004 /* LAN ID 1 */
+
+/* ESDP Bit Masks */
+#define IXGBE_ESDP_SDP4 0x00000001 /* SDP4 Data Value */
+#define IXGBE_ESDP_SDP5 0x00000002 /* SDP5 Data Value */
+#define IXGBE_ESDP_SDP4_DIR     0x00000004 /* SDP4 IO direction */
+#define IXGBE_ESDP_SDP5_DIR     0x00000008 /* SDP5 IO direction */
+
+/* LEDCTL Bit Masks */
+#define IXGBE_LED_IVRT_BASE      0x00000040
+#define IXGBE_LED_BLINK_BASE     0x00000080
+#define IXGBE_LED_MODE_MASK_BASE 0x0000000F
+#define IXGBE_LED_OFFSET(_base, _i) (_base << (8 * (_i)))
+#define IXGBE_LED_MODE_SHIFT(_i) (8*(_i))
+#define IXGBE_LED_IVRT(_i)       IXGBE_LED_OFFSET(IXGBE_LED_IVRT_BASE, _i)
+#define IXGBE_LED_BLINK(_i)      IXGBE_LED_OFFSET(IXGBE_LED_BLINK_BASE, _i)
+#define IXGBE_LED_MODE_MASK(_i)  IXGBE_LED_OFFSET(IXGBE_LED_MODE_MASK_BASE, _i)
+
+/* LED modes */
+#define IXGBE_LED_LINK_UP       0x0
+#define IXGBE_LED_LINK_10G      0x1
+#define IXGBE_LED_MAC           0x2
+#define IXGBE_LED_FILTER        0x3
+#define IXGBE_LED_LINK_ACTIVE   0x4
+#define IXGBE_LED_LINK_1G       0x5
+#define IXGBE_LED_ON            0xE
+#define IXGBE_LED_OFF           0xF
+
+/* AUTOC Bit Masks */
+#define IXGBE_AUTOC_KX4_SUPP    0x80000000
+#define IXGBE_AUTOC_KX_SUPP     0x40000000
+#define IXGBE_AUTOC_PAUSE       0x30000000
+#define IXGBE_AUTOC_RF          0x08000000
+#define IXGBE_AUTOC_PD_TMR      0x06000000
+#define IXGBE_AUTOC_AN_RX_LOOSE 0x01000000
+#define IXGBE_AUTOC_AN_RX_DRIFT 0x00800000
+#define IXGBE_AUTOC_AN_RX_ALIGN 0x007C0000
+#define IXGBE_AUTOC_AN_RESTART  0x00001000
+#define IXGBE_AUTOC_FLU         0x00000001
+#define IXGBE_AUTOC_LMS_SHIFT   13
+#define IXGBE_AUTOC_LMS_MASK   (0x7 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_1G_LINK_NO_AN  (0x0 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_10G_LINK_NO_AN (0x1 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_1G_AN  (0x2 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_KX4_AN (0x4 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_KX4_AN_1G_AN   (0x6 << IXGBE_AUTOC_LMS_SHIFT)
+#define IXGBE_AUTOC_LMS_ATTACH_TYPE    (0x7 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
+
+#define IXGBE_AUTOC_1G_PMA_PMD      0x00000200
+#define IXGBE_AUTOC_10G_PMA_PMD     0x00000180
+#define IXGBE_AUTOC_10G_PMA_PMD_SHIFT 7
+#define IXGBE_AUTOC_1G_PMA_PMD_SHIFT 9
+#define IXGBE_AUTOC_10G_XAUI   (0x0 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_10G_KX4    (0x1 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_10G_CX4    (0x2 << IXGBE_AUTOC_10G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_1G_BX      (0x0 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT)
+#define IXGBE_AUTOC_1G_KX      (0x1 << IXGBE_AUTOC_1G_PMA_PMD_SHIFT)
+
+/* LINKS Bit Masks */
+#define IXGBE_LINKS_KX_AN_COMP  0x80000000
+#define IXGBE_LINKS_UP          0x40000000
+#define IXGBE_LINKS_SPEED       0x20000000
+#define IXGBE_LINKS_MODE        0x18000000
+#define IXGBE_LINKS_RX_MODE     0x06000000
+#define IXGBE_LINKS_TX_MODE     0x01800000
+#define IXGBE_LINKS_XGXS_EN     0x00400000
+#define IXGBE_LINKS_PCS_1G_EN   0x00200000
+#define IXGBE_LINKS_1G_AN_EN    0x00100000
+#define IXGBE_LINKS_KX_AN_IDLE  0x00080000
+#define IXGBE_LINKS_1G_SYNC     0x00040000
+#define IXGBE_LINKS_10G_ALIGN   0x00020000
+#define IXGBE_LINKS_10G_LANE_SYNC 0x00017000
+#define IXGBE_LINKS_TL_FAULT    0x00001000
+#define IXGBE_LINKS_SIGNAL      0x00000F00
+
+#define IXGBE_AUTO_NEG_TIME     45  /* 4.5 Seconds */
+
+/* SW Semaphore Register bitmasks */
+#define IXGBE_SWSM_SMBI 0x00000001 /* Driver Semaphore bit */
+#define IXGBE_SWSM_SWESMBI 0x00000002 /* FW Semaphore bit */
+#define IXGBE_SWSM_WMNG 0x00000004 /* Wake MNG Clock */
+
+/* GSSR definitions */
+#define IXGBE_GSSR_EEP_SM     0x0001
+#define IXGBE_GSSR_PHY0_SM    0x0002
+#define IXGBE_GSSR_PHY1_SM    0x0004
+#define IXGBE_GSSR_MAC_CSR_SM 0x0008
+#define IXGBE_GSSR_FLASH_SM   0x0010
+
+/* EEC Register */
+#define IXGBE_EEC_SK        0x00000001 /* EEPROM Clock */
+#define IXGBE_EEC_CS        0x00000002 /* EEPROM Chip Select */
+#define IXGBE_EEC_DI        0x00000004 /* EEPROM Data In */
+#define IXGBE_EEC_DO        0x00000008 /* EEPROM Data Out */
+#define IXGBE_EEC_FWE_MASK  0x00000030 /* FLASH Write Enable */
+#define IXGBE_EEC_FWE_DIS   0x00000010 /* Disable FLASH writes */
+#define IXGBE_EEC_FWE_EN    0x00000020 /* Enable FLASH writes */
+#define IXGBE_EEC_FWE_SHIFT 4
+#define IXGBE_EEC_REQ       0x00000040 /* EEPROM Access Request */
+#define IXGBE_EEC_GNT       0x00000080 /* EEPROM Access Grant */
+#define IXGBE_EEC_PRES      0x00000100 /* EEPROM Present */
+#define IXGBE_EEC_ARD       0x00000200 /* EEPROM Auto Read Done */
+/* EEPROM Addressing bits based on type (0-small, 1-large) */
+#define IXGBE_EEC_ADDR_SIZE 0x00000400
+#define IXGBE_EEC_SIZE      0x00007800 /* EEPROM Size */
+
+#define IXGBE_EEC_SIZE_SHIFT          11
+#define IXGBE_EEPROM_WORD_SIZE_SHIFT  6
+#define IXGBE_EEPROM_OPCODE_BITS      8
+
+/* Checksum and EEPROM pointers */
+#define IXGBE_EEPROM_CHECKSUM   0x3F
+#define IXGBE_EEPROM_SUM        0xBABA
+#define IXGBE_PCIE_ANALOG_PTR   0x03
+#define IXGBE_ATLAS0_CONFIG_PTR 0x04
+#define IXGBE_ATLAS1_CONFIG_PTR 0x05
+#define IXGBE_PCIE_GENERAL_PTR  0x06
+#define IXGBE_PCIE_CONFIG0_PTR  0x07
+#define IXGBE_PCIE_CONFIG1_PTR  0x08
+#define IXGBE_CORE0_PTR         0x09
+#define IXGBE_CORE1_PTR         0x0A
+#define IXGBE_MAC0_PTR          0x0B
+#define IXGBE_MAC1_PTR          0x0C
+#define IXGBE_CSR0_CONFIG_PTR   0x0D
+#define IXGBE_CSR1_CONFIG_PTR   0x0E
+#define IXGBE_FW_PTR            0x0F
+
+/* EEPROM Commands - SPI */
+#define IXGBE_EEPROM_MAX_RETRY_SPI      5000 /* Max wait 5ms for RDY signal */
+#define IXGBE_EEPROM_STATUS_RDY_SPI     0x01
+#define IXGBE_EEPROM_READ_OPCODE_SPI    0x03  /* EEPROM read opcode */
+#define IXGBE_EEPROM_WRITE_OPCODE_SPI   0x02  /* EEPROM write opcode */
+#define IXGBE_EEPROM_A8_OPCODE_SPI      0x08  /* opcode bit-3 = addr bit-8 */
+#define IXGBE_EEPROM_WREN_OPCODE_SPI    0x06  /* EEPROM set Write Ena latch */
+/* EEPROM reset Write Enbale latch */
+#define IXGBE_EEPROM_WRDI_OPCODE_SPI    0x04
+#define IXGBE_EEPROM_RDSR_OPCODE_SPI    0x05  /* EEPROM read Status reg */
+#define IXGBE_EEPROM_WRSR_OPCODE_SPI    0x01  /* EEPROM write Status reg */
+#define IXGBE_EEPROM_ERASE4K_OPCODE_SPI 0x20  /* EEPROM ERASE 4KB */
+#define IXGBE_EEPROM_ERASE64K_OPCODE_SPI  0xD8  /* EEPROM ERASE 64KB */
+#define IXGBE_EEPROM_ERASE256_OPCODE_SPI  0xDB  /* EEPROM ERASE 256B */
+
+/* EEPROM Read Register */
+#define IXGBE_EEPROM_READ_REG_DATA   16   /* data offset in EEPROM read reg */
+#define IXGBE_EEPROM_READ_REG_DONE   2    /* Offset to READ done bit */
+#define IXGBE_EEPROM_READ_REG_START  1    /* First bit to start operation */
+#define IXGBE_EEPROM_READ_ADDR_SHIFT 2    /* Shift to the address bits */
+
+#define IXGBE_ETH_LENGTH_OF_ADDRESS   6
+
+#ifndef IXGBE_EEPROM_GRANT_ATTEMPTS
+#define IXGBE_EEPROM_GRANT_ATTEMPTS 1000 /* EEPROM # attempts to gain grant */
+#endif
+
+#ifndef IXGBE_EERD_ATTEMPTS
+/* Number of 5 microseconds we wait for EERD read to complete */
+#define IXGBE_EERD_ATTEMPTS 100000
+#endif
+
+/* PCI Bus Info */
+#define IXGBE_PCI_LINK_STATUS     0xB2
+#define IXGBE_PCI_LINK_WIDTH      0x3F0
+#define IXGBE_PCI_LINK_WIDTH_1    0x10
+#define IXGBE_PCI_LINK_WIDTH_2    0x20
+#define IXGBE_PCI_LINK_WIDTH_4    0x40
+#define IXGBE_PCI_LINK_WIDTH_8    0x80
+#define IXGBE_PCI_LINK_SPEED      0xF
+#define IXGBE_PCI_LINK_SPEED_2500 0x1
+#define IXGBE_PCI_LINK_SPEED_5000 0x2
+
+/* Number of 100 microseconds we wait for PCI Express master disable */
+#define IXGBE_PCI_MASTER_DISABLE_TIMEOUT 800
+
+/* PHY Types */
+#define IXGBE_M88E1145_E_PHY_ID  0x01410CD0
+
+/* Check whether address is multicast.  This is little-endian specific check.*/
+#define IXGBE_IS_MULTICAST(Address) \
+		(bool)(((u8 *)(Address))[0] & ((u8)0x01))
+
+/* Check whether an address is broadcast. */
+#define IXGBE_IS_BROADCAST(Address)                      \
+		((((u8 *)(Address))[0] == ((u8)0xff)) && \
+		(((u8 *)(Address))[1] == ((u8)0xff)))
+
+/* RAH */
+#define IXGBE_RAH_VIND_MASK     0x003C0000
+#define IXGBE_RAH_VIND_SHIFT    18
+#define IXGBE_RAH_AV            0x80000000
+
+/* Filters */
+#define IXGBE_MC_TBL_SIZE       128  /* Multicast Filter Table (4096 bits) */
+#define IXGBE_VLAN_FILTER_TBL_SIZE 128  /* VLAN Filter Table (4096 bits) */
+
+/* Header split receive */
+#define IXGBE_RFCTL_ISCSI_DIS       0x00000001
+#define IXGBE_RFCTL_ISCSI_DWC_MASK  0x0000003E
+#define IXGBE_RFCTL_ISCSI_DWC_SHIFT 1
+#define IXGBE_RFCTL_NFSW_DIS        0x00000040
+#define IXGBE_RFCTL_NFSR_DIS        0x00000080
+#define IXGBE_RFCTL_NFS_VER_MASK    0x00000300
+#define IXGBE_RFCTL_NFS_VER_SHIFT   8
+#define IXGBE_RFCTL_NFS_VER_2       0
+#define IXGBE_RFCTL_NFS_VER_3       1
+#define IXGBE_RFCTL_NFS_VER_4       2
+#define IXGBE_RFCTL_IPV6_DIS        0x00000400
+#define IXGBE_RFCTL_IPV6_XSUM_DIS   0x00000800
+#define IXGBE_RFCTL_IPFRSP_DIS      0x00004000
+#define IXGBE_RFCTL_IPV6_EX_DIS     0x00010000
+#define IXGBE_RFCTL_NEW_IPV6_EXT_DIS 0x00020000
+
+/* Transmit Config masks */
+#define IXGBE_TXDCTL_ENABLE     0x02000000 /* Enable specific Tx Queue */
+#define IXGBE_TXDCTL_SWFLSH     0x04000000 /* Tx Desc. write-back flushing */
+/* Enable short packet padding to 64 bytes */
+#define IXGBE_TX_PAD_ENABLE     0x00000400
+#define IXGBE_JUMBO_FRAME_ENABLE 0x00000004  /* Allow jumbo frames */
+/* This allows for 16K packets + 4k for vlan */
+#define IXGBE_MAX_FRAME_SZ      0x40040000
+
+#define IXGBE_TDWBAL_HEAD_WB_ENABLE   0x1      /* Tx head write-back enable */
+#define IXGBE_TDWBAL_SEQNUM_WB_ENABLE 0x2      /* Tx seq. # write-back enable */
+
+/* Receive Config masks */
+#define IXGBE_RXCTRL_RXEN       0x00000001  /* Enable Receiver */
+#define IXGBE_RXCTRL_DMBYPS     0x00000002  /* Descriptor Monitor Bypass */
+#define IXGBE_RXDCTL_ENABLE     0x02000000  /* Enable specific Rx Queue */
+
+#define IXGBE_FCTRL_SBP 0x00000002 /* Store Bad Packet */
+#define IXGBE_FCTRL_MPE 0x00000100 /* Multicast Promiscuous Ena*/
+#define IXGBE_FCTRL_UPE 0x00000200 /* Unicast Promiscuous Ena */
+#define IXGBE_FCTRL_BAM 0x00000400 /* Broadcast Accept Mode */
+#define IXGBE_FCTRL_PMCF 0x00001000 /* Pass MAC Control Frames */
+#define IXGBE_FCTRL_DPF 0x00002000 /* Discard Pause Frame */
+/* Receive Priority Flow Control Enbale */
+#define IXGBE_FCTRL_RPFCE 0x00004000
+#define IXGBE_FCTRL_RFCE 0x00008000 /* Receive Flow Control Ena */
+
+/* Multiple Receive Queue Control */
+#define IXGBE_MRQC_RSSEN                 0x00000001  /* RSS Enable */
+#define IXGBE_MRQC_RSS_FIELD_MASK        0xFFFF0000
+#define IXGBE_MRQC_RSS_FIELD_IPV4_TCP    0x00010000
+#define IXGBE_MRQC_RSS_FIELD_IPV4        0x00020000
+#define IXGBE_MRQC_RSS_FIELD_IPV6_EX_TCP 0x00040000
+#define IXGBE_MRQC_RSS_FIELD_IPV6_EX     0x00080000
+#define IXGBE_MRQC_RSS_FIELD_IPV6        0x00100000
+#define IXGBE_MRQC_RSS_FIELD_IPV6_TCP    0x00200000
+#define IXGBE_MRQC_RSS_FIELD_IPV4_UDP    0x00400000
+#define IXGBE_MRQC_RSS_FIELD_IPV6_UDP    0x00800000
+#define IXGBE_MRQC_RSS_FIELD_IPV6_EX_UDP 0x01000000
+
+#define IXGBE_TXD_POPTS_IXSM 0x01       /* Insert IP checksum */
+#define IXGBE_TXD_POPTS_TXSM 0x02       /* Insert TCP/UDP checksum */
+#define IXGBE_TXD_CMD_EOP    0x01000000 /* End of Packet */
+#define IXGBE_TXD_CMD_IFCS   0x02000000 /* Insert FCS (Ethernet CRC) */
+#define IXGBE_TXD_CMD_IC     0x04000000 /* Insert Checksum */
+#define IXGBE_TXD_CMD_RS     0x08000000 /* Report Status */
+#define IXGBE_TXD_CMD_DEXT   0x20000000 /* Descriptor extension (0 = legacy) */
+#define IXGBE_TXD_CMD_VLE    0x40000000 /* Add VLAN tag */
+#define IXGBE_TXD_STAT_DD    0x00000001 /* Descriptor Done */
+
+/* Receive Descriptor bit definitions */
+#define IXGBE_RXD_STAT_DD       0x01    /* Descriptor Done */
+#define IXGBE_RXD_STAT_EOP      0x02    /* End of Packet */
+#define IXGBE_RXD_STAT_IXSM     0x04    /* Ignore checksum */
+#define IXGBE_RXD_STAT_VP       0x08    /* IEEE VLAN Packet */
+#define IXGBE_RXD_STAT_UDPCS    0x10    /* UDP xsum caculated */
+#define IXGBE_RXD_STAT_L4CS     0x20    /* L4 xsum calculated */
+#define IXGBE_RXD_STAT_IPCS     0x40    /* IP xsum calculated */
+#define IXGBE_RXD_STAT_PIF      0x80    /* passed in-exact filter */
+#define IXGBE_RXD_STAT_CRCV     0x100   /* Speculative CRC Valid */
+#define IXGBE_RXD_STAT_VEXT     0x200   /* 1st VLAN found */
+#define IXGBE_RXD_STAT_UDPV     0x400   /* Valid UDP checksum */
+#define IXGBE_RXD_STAT_DYNINT   0x800   /* Pkt caused INT via DYNINT */
+#define IXGBE_RXD_STAT_ACK      0x8000  /* ACK Packet indication */
+#define IXGBE_RXD_ERR_CE        0x01    /* CRC Error */
+#define IXGBE_RXD_ERR_LE        0x02    /* Length Error */
+#define IXGBE_RXD_ERR_PE        0x08    /* Packet Error */
+#define IXGBE_RXD_ERR_OSE       0x10    /* Oversize Error */
+#define IXGBE_RXD_ERR_USE       0x20    /* Undersize Error */
+#define IXGBE_RXD_ERR_TCPE      0x40    /* TCP/UDP Checksum Error */
+#define IXGBE_RXD_ERR_IPE       0x80    /* IP Checksum Error */
+#define IXGBE_RXDADV_HBO        0x00800000
+#define IXGBE_RXDADV_ERR_CE     0x01000000 /* CRC Error */
+#define IXGBE_RXDADV_ERR_LE     0x02000000 /* Length Error */
+#define IXGBE_RXDADV_ERR_PE     0x08000000 /* Packet Error */
+#define IXGBE_RXDADV_ERR_OSE    0x10000000 /* Oversize Error */
+#define IXGBE_RXDADV_ERR_USE    0x20000000 /* Undersize Error */
+#define IXGBE_RXDADV_ERR_TCPE   0x40000000 /* TCP/UDP Checksum Error */
+#define IXGBE_RXDADV_ERR_IPE    0x80000000 /* IP Checksum Error */
+#define IXGBE_RXD_VLAN_ID_MASK  0x0FFF  /* VLAN ID is in lower 12 bits */
+#define IXGBE_RXD_PRI_MASK      0xE000  /* Priority is in upper 3 bits */
+#define IXGBE_RXD_PRI_SHIFT     13
+#define IXGBE_RXD_CFI_MASK      0x1000  /* CFI is bit 12 */
+#define IXGBE_RXD_CFI_SHIFT     12
+
+/* SRRCTL bit definitions */
+#define IXGBE_SRRCTL_BSIZEPKT_SHIFT 10     /* so many KBs */
+#define IXGBE_SRRCTL_BSIZEPKT_MASK  0x0000007F
+#define IXGBE_SRRCTL_BSIZEHDR_MASK  0x00003F00
+#define IXGBE_SRRCTL_DESCTYPE_LEGACY 0x00000000
+#define IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF 0x02000000
+#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT  0x04000000
+#define IXGBE_SRRCTL_DESCTYPE_HDR_REPLICATION_LARGE_PKT 0x08000000
+#define IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS 0x0A000000
+
+#define IXGBE_RXDPS_HDRSTAT_HDRSP       0x00008000
+#define IXGBE_RXDPS_HDRSTAT_HDRLEN_MASK 0x000003FF
+
+#define IXGBE_RXDADV_RSSTYPE_MASK       0x0000000F
+#define IXGBE_RXDADV_PKTTYPE_MASK       0x0000FFF0
+#define IXGBE_RXDADV_HDRBUFLEN_MASK     0x00007FE0
+#define IXGBE_RXDADV_HDRBUFLEN_SHIFT    5
+#define IXGBE_RXDADV_SPLITHEADER_EN     0x00001000
+#define IXGBE_RXDADV_SPH                0x8000
+
+/* RSS Hash results */
+#define IXGBE_RXDADV_RSSTYPE_NONE       0x00000000
+#define IXGBE_RXDADV_RSSTYPE_IPV4_TCP   0x00000001
+#define IXGBE_RXDADV_RSSTYPE_IPV4       0x00000002
+#define IXGBE_RXDADV_RSSTYPE_IPV6_TCP   0x00000003
+#define IXGBE_RXDADV_RSSTYPE_IPV6_EX    0x00000004
+#define IXGBE_RXDADV_RSSTYPE_IPV6       0x00000005
+#define IXGBE_RXDADV_RSSTYPE_IPV6_TCP_EX 0x00000006
+#define IXGBE_RXDADV_RSSTYPE_IPV4_UDP   0x00000007
+#define IXGBE_RXDADV_RSSTYPE_IPV6_UDP   0x00000008
+#define IXGBE_RXDADV_RSSTYPE_IPV6_UDP_EX 0x00000009
+
+/* RSS Packet Types as indicated in the receive descriptor. */
+#define IXGBE_RXDADV_PKTTYPE_NONE       0x00000000
+#define IXGBE_RXDADV_PKTTYPE_IPV4       0x00000010 /* IPv4 hdr present */
+#define IXGBE_RXDADV_PKTTYPE_IPV4_EX    0x00000020 /* IPv4 hdr + extensions */
+#define IXGBE_RXDADV_PKTTYPE_IPV6       0x00000040 /* IPv6 hdr present */
+#define IXGBE_RXDADV_PKTTYPE_IPV6_EX    0x00000080 /* IPv6 hdr + extensions */
+#define IXGBE_RXDADV_PKTTYPE_TCP        0x00000100 /* TCP hdr present */
+#define IXGBE_RXDADV_PKTTYPE_UDP        0x00000200 /* UDP hdr present */
+#define IXGBE_RXDADV_PKTTYPE_SCTP       0x00000400 /* SCTP hdr present */
+#define IXGBE_RXDADV_PKTTYPE_NFS        0x00000800 /* NFS hdr present */
+
+/* Masks to determine if packets should be dropped due to frame errors */
+#define IXGBE_RXD_ERR_FRAME_ERR_MASK ( \
+				      IXGBE_RXD_ERR_CE | \
+				      IXGBE_RXD_ERR_LE | \
+				      IXGBE_RXD_ERR_PE | \
+				      IXGBE_RXD_ERR_OSE | \
+				      IXGBE_RXD_ERR_USE)
+
+#define IXGBE_RXDADV_ERR_FRAME_ERR_MASK ( \
+				      IXGBE_RXDADV_ERR_CE | \
+				      IXGBE_RXDADV_ERR_LE | \
+				      IXGBE_RXDADV_ERR_PE | \
+				      IXGBE_RXDADV_ERR_OSE | \
+				      IXGBE_RXDADV_ERR_USE)
+
+/* Multicast bit mask */
+#define IXGBE_MCSTCTRL_MFE      0x4
+
+/* Number of Transmit and Receive Descriptors must be a multiple of 8 */
+#define IXGBE_REQ_TX_DESCRIPTOR_MULTIPLE  8
+#define IXGBE_REQ_RX_DESCRIPTOR_MULTIPLE  8
+#define IXGBE_REQ_TX_BUFFER_GRANULARITY   1024
+
+/* Vlan-specific macros */
+#define IXGBE_RX_DESC_SPECIAL_VLAN_MASK  0x0FFF /* VLAN ID in lower 12 bits */
+#define IXGBE_RX_DESC_SPECIAL_PRI_MASK   0xE000 /* Priority in upper 3 bits */
+#define IXGBE_RX_DESC_SPECIAL_PRI_SHIFT  0x000D /* Priority in upper 3 of 16 */
+#define IXGBE_TX_DESC_SPECIAL_PRI_SHIFT  IXGBE_RX_DESC_SPECIAL_PRI_SHIFT
+
+/* Transmit Descriptor - Legacy */
+struct ixgbe_legacy_tx_desc {
+	u64 buffer_addr;       /* Address of the descriptor's data buffer */
+	union {
+		u32 data;
+		struct {
+			u16 length;    /* Data buffer length */
+			u8 cso; /* Checksum offset */
+			u8 cmd; /* Descriptor control */
+		} flags;
+	} lower;
+	union {
+		u32 data;
+		struct {
+			u8 status;     /* Descriptor status */
+			u8 css; /* Checksum start */
+			u16 vlan;
+		} fields;
+	} upper;
+};
+
+/* Transmit Descriptor - Advanced */
+union ixgbe_adv_tx_desc {
+	struct {
+		u64 buffer_addr;       /* Address of descriptor's data buf */
+		u32 cmd_type_len;
+		u32 olinfo_status;
+	} read;
+	struct {
+		u64 rsvd;       /* Reserved */
+		u32 nxtseq_seed;
+		u32 status;
+	} wb;
+};
+
+/* Receive Descriptor - Legacy */
+struct ixgbe_legacy_rx_desc {
+	u64 buffer_addr; /* Address of the descriptor's data buffer */
+	u16 length;      /* Length of data DMAed into data buffer */
+	u16 csum;        /* Packet checksum */
+	u8 status;       /* Descriptor status */
+	u8 errors;       /* Descriptor Errors */
+	u16 vlan;
+};
+
+/* Receive Descriptor - Advanced */
+union ixgbe_adv_rx_desc {
+	struct {
+		u64 pkt_addr; /* Packet buffer address */
+		u64 hdr_addr; /* Header buffer address */
+	} read;
+	struct {
+		struct {
+			struct {
+				u16 pkt_info; /* RSS type, Packet type */
+				u16 hdr_info; /* Split Header, header len */
+			} lo_dword;
+			union {
+				u32 rss; /* RSS Hash */
+				struct {
+					u16 ip_id; /* IP id */
+					u16 csum; /* Packet Checksum */
+				} csum_ip;
+			} hi_dword;
+		} lower;
+		struct {
+			u32 status_error; /* ext status/error */
+			u16 length; /* Packet length */
+			u16 vlan; /* VLAN tag */
+		} upper;
+	} wb;  /* writeback */
+};
+
+/* Context descriptors */
+struct ixgbe_adv_tx_context_desc {
+	u32 vlan_macip_lens;
+	u32 seqnum_seed;
+	u32 type_tucmd_mlhl;
+	u32 mss_l4len_idx;
+};
+
+/* Adv Transmit Descriptor Config Masks */
+#define IXGBE_ADVTXD_DTALEN_MASK      0x0000FFFF /* Data buffer length(bytes) */
+#define IXGBE_ADVTXD_DTYP_MASK  0x00F00000 /* DTYP mask */
+#define IXGBE_ADVTXD_DTYP_CTXT  0x00200000 /* Advanced Context Desc */
+#define IXGBE_ADVTXD_DTYP_DATA  0x00300000 /* Advanced Data Descriptor */
+#define IXGBE_ADVTXD_DCMD_EOP   IXGBE_TXD_CMD_EOP  /* End of Packet */
+#define IXGBE_ADVTXD_DCMD_IFCS  IXGBE_TXD_CMD_IFCS /* Insert FCS */
+#define IXGBE_ADVTXD_DCMD_RDMA  0x04000000 /* RDMA */
+#define IXGBE_ADVTXD_DCMD_RS    IXGBE_TXD_CMD_RS   /* Report Status */
+#define IXGBE_ADVTXD_DCMD_DDTYP_ISCSI 0x10000000     /* DDP hdr type or iSCSI */
+#define IXGBE_ADVTXD_DCMD_DEXT  IXGBE_TXD_CMD_DEXT /* Desc ext (1=Adv) */
+#define IXGBE_ADVTXD_DCMD_VLE   IXGBE_TXD_CMD_VLE  /* VLAN pkt enable */
+#define IXGBE_ADVTXD_DCMD_TSE   0x80000000 /* TCP Seg enable */
+#define IXGBE_ADVTXD_STAT_DD    IXGBE_TXD_STAT_DD  /* Descriptor Done */
+#define IXGBE_ADVTXD_STAT_SN_CRC      0x00000002 /* NXTSEQ/SEED present in WB */
+#define IXGBE_ADVTXD_STAT_RSV   0x0000000C /* STA Reserved */
+#define IXGBE_ADVTXD_IDX_SHIFT  4 /* Adv desc Index shift */
+#define IXGBE_ADVTXD_POPTS_SHIFT      8  /* Adv desc POPTS shift */
+#define IXGBE_ADVTXD_POPTS_IXSM (IXGBE_TXD_POPTS_IXSM << \
+				IXGBE_ADVTXD_POPTS_SHIFT)
+#define IXGBE_ADVTXD_POPTS_TXSM (IXGBE_TXD_POPTS_TXSM << \
+				IXGBE_ADVTXD_POPTS_SHIFT)
+#define IXGBE_ADVTXD_POPTS_EOM  0x00000400 /* Enable L bit-RDMA DDP hdr */
+#define IXGBE_ADVTXD_POPTS_ISCO_1ST   0x00000000 /* 1st TSO of iSCSI PDU */
+#define IXGBE_ADVTXD_POPTS_ISCO_MDL   0x00000800 /* Middle TSO of iSCSI PDU */
+#define IXGBE_ADVTXD_POPTS_ISCO_LAST  0x00001000 /* Last TSO of iSCSI PDU */
+#define IXGBE_ADVTXD_POPTS_ISCO_FULL 0x00001800 /* 1st&Last TSO-full iSCSI PDU*/
+#define IXGBE_ADVTXD_POPTS_RSV  0x00002000 /* POPTS Reserved */
+#define IXGBE_ADVTXD_PAYLEN_SHIFT  14 /* Adv desc PAYLEN shift */
+#define IXGBE_ADVTXD_MACLEN_SHIFT  9  /* Adv ctxt desc mac len shift */
+#define IXGBE_ADVTXD_VLAN_SHIFT    16  /* Adv ctxt vlan tag shift */
+#define IXGBE_ADVTXD_TUCMD_IPV4    0x00000400  /* IP Packet Type: 1=IPv4 */
+#define IXGBE_ADVTXD_TUCMD_IPV6    0x00000000  /* IP Packet Type: 0=IPv6 */
+#define IXGBE_ADVTXD_TUCMD_L4T_UDP 0x00000000  /* L4 Packet TYPE of UDP */
+#define IXGBE_ADVTXD_TUCMD_L4T_TCP 0x00000800  /* L4 Packet TYPE of TCP */
+#define IXGBE_ADVTXD_TUCMD_MKRREQ  0x00002000 /* Req requires Markers and CRC */
+#define IXGBE_ADVTXD_L4LEN_SHIFT   8  /* Adv ctxt L4LEN shift */
+#define IXGBE_ADVTXD_MSS_SHIFT     16  /* Adv ctxt MSS shift */
+
+/* Autonegotiation advertised speeds */
+typedef u32 ixgbe_autoneg_advertised;
+/* Link speed */
+typedef u32 ixgbe_link_speed;
+#define IXGBE_LINK_SPEED_UNKNOWN   0
+#define IXGBE_LINK_SPEED_1GB_FULL  0x0020
+#define IXGBE_LINK_SPEED_10GB_FULL 0x0080
+
+
+enum ixgbe_eeprom_type {
+	ixgbe_eeprom_uninitialized = 0,
+	ixgbe_eeprom_spi,
+	ixgbe_eeprom_none /* No NVM support */
+};
+
+enum ixgbe_mac_type {
+	ixgbe_mac_unknown = 0,
+	ixgbe_mac_82598EB,
+	ixgbe_num_macs
+};
+
+enum ixgbe_phy_type {
+	ixgbe_phy_unknown = 0,
+	ixgbe_phy_tn,
+	ixgbe_phy_qt,
+	ixgbe_phy_xaui
+};
+
+enum ixgbe_media_type {
+	ixgbe_media_type_unknown = 0,
+	ixgbe_media_type_fiber,
+	ixgbe_media_type_copper,
+	ixgbe_media_type_backplane
+};
+
+/* Flow Control Settings */
+enum ixgbe_fc_type {
+	ixgbe_fc_none = 0,
+	ixgbe_fc_rx_pause,
+	ixgbe_fc_tx_pause,
+	ixgbe_fc_full,
+	ixgbe_fc_default
+};
+
+/* PCI bus types */
+enum ixgbe_bus_type {
+	ixgbe_bus_type_unknown = 0,
+	ixgbe_bus_type_pci,
+	ixgbe_bus_type_pcix,
+	ixgbe_bus_type_pci_express,
+	ixgbe_bus_type_reserved
+};
+
+/* PCI bus speeds */
+enum ixgbe_bus_speed {
+	ixgbe_bus_speed_unknown = 0,
+	ixgbe_bus_speed_33,
+	ixgbe_bus_speed_66,
+	ixgbe_bus_speed_100,
+	ixgbe_bus_speed_120,
+	ixgbe_bus_speed_133,
+	ixgbe_bus_speed_2500,
+	ixgbe_bus_speed_5000,
+	ixgbe_bus_speed_reserved
+};
+
+/* PCI bus widths */
+enum ixgbe_bus_width {
+	ixgbe_bus_width_unknown = 0,
+	ixgbe_bus_width_pcie_x1,
+	ixgbe_bus_width_pcie_x2,
+	ixgbe_bus_width_pcie_x4,
+	ixgbe_bus_width_pcie_x8,
+	ixgbe_bus_width_32,
+	ixgbe_bus_width_64,
+	ixgbe_bus_width_reserved
+};
+
+struct ixgbe_eeprom_info {
+	enum ixgbe_eeprom_type type;
+	u16 word_size;
+	u16 address_bits;
+};
+
+struct ixgbe_addr_filter_info {
+	u32 num_mc_addrs;
+	u32 rar_used_count;
+	u32 mc_addr_in_rar_count;
+	u32 mta_in_use;
+};
+
+/* Bus parameters */
+struct ixgbe_bus_info {
+	enum ixgbe_bus_speed speed;
+	enum ixgbe_bus_width width;
+	enum ixgbe_bus_type type;
+};
+
+/* Flow control parameters */
+struct ixgbe_fc_info {
+	u32 high_water; /* Flow Control High-water */
+	u32 low_water; /* Flow Control Low-water */
+	u16 pause_time; /* Flow Control Pause timer */
+	bool send_xon; /* Flow control send XON */
+	bool strict_ieee; /* Strict IEEE mode */
+	enum ixgbe_fc_type type; /* Type of flow control */
+	enum ixgbe_fc_type original_type;
+};
+
+/* Statistics counters collected by the MAC */
+struct ixgbe_hw_stats {
+	u64 crcerrs;
+	u64 illerrc;
+	u64 errbc;
+	u64 mspdc;
+	u64 mpctotal;
+	u64 mpc[8];
+	u64 mlfc;
+	u64 mrfc;
+	u64 rlec;
+	u64 lxontxc;
+	u64 lxonrxc;
+	u64 lxofftxc;
+	u64 lxoffrxc;
+	u64 pxontxc[8];
+	u64 pxonrxc[8];
+	u64 pxofftxc[8];
+	u64 pxoffrxc[8];
+	u64 prc64;
+	u64 prc127;
+	u64 prc255;
+	u64 prc511;
+	u64 prc1023;
+	u64 prc1522;
+	u64 gprc;
+	u64 bprc;
+	u64 mprc;
+	u64 gptc;
+	u64 gorc;
+	u64 gotc;
+	u64 rnbc[8];
+	u64 ruc;
+	u64 rfc;
+	u64 roc;
+	u64 rjc;
+	u64 mngprc;
+	u64 mngpdc;
+	u64 mngptc;
+	u64 tor;
+	u64 tpr;
+	u64 tpt;
+	u64 ptc64;
+	u64 ptc127;
+	u64 ptc255;
+	u64 ptc511;
+	u64 ptc1023;
+	u64 ptc1522;
+	u64 mptc;
+	u64 bptc;
+	u64 xec;
+	u64 rqsmr[16];
+	u64 tqsmr[8];
+	u64 qprc[16];
+	u64 qptc[16];
+	u64 qbrc[16];
+	u64 qbtc[16];
+};
+
+
+/* forward declaration */
+struct ixgbe_hw;
+
+/* Function pointer table */
+struct ixgbe_functions
+{
+	s32 (*ixgbe_func_init_hw)(struct ixgbe_hw *);
+	s32 (*ixgbe_func_reset_hw)(struct ixgbe_hw *);
+	s32 (*ixgbe_func_start_hw)(struct ixgbe_hw *);
+	s32 (*ixgbe_func_clear_hw_cntrs)(struct ixgbe_hw *);
+	enum ixgbe_media_type (*ixgbe_func_get_media_type)(struct ixgbe_hw *);
+	s32 (*ixgbe_func_get_mac_addr)(struct ixgbe_hw *, u8 *);
+	u32 (*ixgbe_func_get_num_of_tx_queues)(struct ixgbe_hw *);
+	u32 (*ixgbe_func_get_num_of_rx_queues)(struct ixgbe_hw *);
+	s32 (*ixgbe_func_stop_adapter)(struct ixgbe_hw *);
+	s32 (*ixgbe_func_get_bus_info)(struct ixgbe_hw *);
+
+
+	/* PHY */
+	s32 (*ixgbe_func_identify_phy)(struct ixgbe_hw *);
+	s32 (*ixgbe_func_reset_phy)(struct ixgbe_hw *);
+	s32 (*ixgbe_func_read_phy_reg)(struct ixgbe_hw *, u32, u32, u16 *);
+	s32 (*ixgbe_func_write_phy_reg)(struct ixgbe_hw *, u32, u32, u16);
+	s32 (*ixgbe_func_setup_phy_link)(struct ixgbe_hw *);
+	s32 (*ixgbe_func_setup_phy_link_speed)(struct ixgbe_hw *,
+					       ixgbe_link_speed,
+					       bool, bool);
+	s32 (*ixgbe_func_check_phy_link)(struct ixgbe_hw *, ixgbe_link_speed *,
+					 bool *);
+
+	/* Link */
+	s32 (*ixgbe_func_setup_link)(struct ixgbe_hw *);
+	s32 (*ixgbe_func_setup_link_speed)(struct ixgbe_hw *, ixgbe_link_speed,
+					   bool, bool);
+	s32 (*ixgbe_func_check_link)(struct ixgbe_hw *, ixgbe_link_speed *,
+				     bool *);
+	s32 (*ixgbe_func_get_link_settings)(struct ixgbe_hw *,
+					    ixgbe_link_speed *,
+					    bool *);
+
+	/* LED */
+	s32 (*ixgbe_func_led_on)(struct ixgbe_hw *, u32);
+	s32 (*ixgbe_func_led_off)(struct ixgbe_hw *, u32);
+	s32 (*ixgbe_func_blink_led_start)(struct ixgbe_hw *, u32);
+	s32 (*ixgbe_func_blink_led_stop)(struct ixgbe_hw *, u32);
+
+	/* EEPROM */
+	s32 (*ixgbe_func_init_eeprom_params)(struct ixgbe_hw *);
+	s32 (*ixgbe_func_read_eeprom)(struct ixgbe_hw *, u16, u16 *);
+	s32 (*ixgbe_func_write_eeprom)(struct ixgbe_hw *, u16, u16);
+	s32 (*ixgbe_func_validate_eeprom_checksum)(struct ixgbe_hw *, u16 *);
+	s32 (*ixgbe_func_update_eeprom_checksum)(struct ixgbe_hw *);
+
+	/* RAR, Multicast, VLAN */
+	s32 (*ixgbe_func_set_rar)(struct ixgbe_hw *, u32, u8 *, u32 , u32);
+	s32 (*ixgbe_func_init_rx_addrs)(struct ixgbe_hw *);
+	u32 (*ixgbe_func_get_num_rx_addrs)(struct ixgbe_hw *);
+	s32 (*ixgbe_func_update_mc_addr_list)(struct ixgbe_hw *, u8 *, u32,
+					      u32);
+	s32 (*ixgbe_func_enable_mc)(struct ixgbe_hw *);
+	s32 (*ixgbe_func_disable_mc)(struct ixgbe_hw *);
+	s32 (*ixgbe_func_clear_vfta)(struct ixgbe_hw *);
+	s32 (*ixgbe_func_set_vfta)(struct ixgbe_hw *, u32, u32, bool);
+
+	/* Flow Control */
+	s32 (*ixgbe_func_setup_fc)(struct ixgbe_hw *, s32);
+};
+
+struct ixgbe_mac_info {
+	enum ixgbe_mac_type type;
+	u8                  addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
+	u8                  perm_addr[IXGBE_ETH_LENGTH_OF_ADDRESS];
+	s32                 mc_filter_type;
+	u32                 link_attach_type;
+	u32                 link_mode_select;
+	bool                link_settings_loaded;
+};
+
+struct ixgbe_phy_info {
+	enum ixgbe_phy_type             type;
+	u32                             addr;
+	u32                             id;
+	u32                             revision;
+	enum ixgbe_media_type           media_type;
+	ixgbe_autoneg_advertised        autoneg_advertised;
+	bool                            autoneg_wait_to_complete;
+};
+
+struct ixgbe_hw {
+	u8                              *hw_addr;
+	void                            *back;
+	struct ixgbe_functions          func;
+	struct ixgbe_mac_info           mac;
+	struct ixgbe_addr_filter_info   addr_ctrl;
+	struct ixgbe_fc_info            fc;
+	struct ixgbe_phy_info           phy;
+	struct ixgbe_eeprom_info        eeprom;
+	struct ixgbe_bus_info           bus;
+	u16                             device_id;
+	u16                             vendor_id;
+	u16                             subsystem_device_id;
+	u16                             subsystem_vendor_id;
+	u8                              revision_id;
+	bool                            adapter_stopped;
+};
+
+
+#define ixgbe_func_from_hw_struct(hw, _func) hw->func._func
+
+#define ixgbe_call_func(hw, func, params, error) \
+		(ixgbe_func_from_hw_struct(hw, func) != NULL) ? \
+		ixgbe_func_from_hw_struct(hw, func) params: error
+
+/* Error Codes */
+#define IXGBE_SUCCESS                           0
+#define IXGBE_ERR_EEPROM                        -1
+#define IXGBE_ERR_EEPROM_CHECKSUM               -2
+#define IXGBE_ERR_PHY                           -3
+#define IXGBE_ERR_CONFIG                        -4
+#define IXGBE_ERR_PARAM                         -5
+#define IXGBE_ERR_MAC_TYPE                      -6
+#define IXGBE_ERR_UNKNOWN_PHY                   -7
+#define IXGBE_ERR_LINK_SETUP                    -8
+#define IXGBE_ERR_ADAPTER_STOPPED               -9
+#define IXGBE_ERR_INVALID_MAC_ADDR              -10
+#define IXGBE_ERR_DEVICE_NOT_SUPPORTED          -11
+#define IXGBE_ERR_MASTER_REQUESTS_PENDING       -12
+#define IXGBE_ERR_INVALID_LINK_SETTINGS         -13
+#define IXGBE_ERR_AUTONEG_NOT_COMPLETE          -14
+#define IXGBE_ERR_RESET_FAILED                  -15
+#define IXGBE_ERR_SWFW_SYNC                     -16
+#define IXGBE_ERR_PHY_ADDR_INVALID              -17
+#define IXGBE_NOT_IMPLEMENTED                   0x7FFFFFFF
+
+#ifndef UNREFERENCED_PARAMETER
+#define UNREFERENCED_PARAMETER(_p)
+#endif
+
+#endif /* _IXGBE_TYPE_H_ */