Remove the old RocketPort driver which was left behind in favour

of the new driver.  The new driver works, the old one is 1+ year behind.

3 files changed, 0 insertions, 1990 deletions

diff --git a/sys/conf/files.i386 b/sys/conf/files.i386
index 5b9e1e1..819a881 100644
--- a/sys/conf/files.i386
+++ b/sys/conf/files.i386
@@ -273,7 +273,6 @@ i386/isa/pcvt/pcvt_vtf.c	optional	vt
 i386/isa/pmtimer.c		optional	pmtimer
 i386/isa/prof_machdep.c		optional	profiling-routine
 i386/isa/rc.c			count		rc
-#i386/isa/rp.c			optional	rp
 i386/isa/scd.c			count		scd
 i386/isa/spic.c			optional	spic
 i386/isa/spigot.c		count		spigot
diff --git a/sys/conf/files.pc98 b/sys/conf/files.pc98
index 3751430..ed4805a 100644
--- a/sys/conf/files.pc98
+++ b/sys/conf/files.pc98
@@ -259,7 +259,6 @@ i386/isa/pcvt/pcvt_vtf.c	optional	vt
 i386/isa/pmtimer.c		optional	pmtimer
 i386/isa/prof_machdep.c		optional	profiling-routine
 i386/isa/rc.c			count		rc
-#i386/isa/rp.c			optional	rp
 i386/isa/scd.c			count		scd
 i386/isa/spic.c			optional	spic
 i386/isa/spigot.c		count		spigot
diff --git a/sys/i386/isa/rp.c b/sys/i386/isa/rp.c
deleted file mode 100644
index b3e5477..0000000
--- a/sys/i386/isa/rp.c
+++ /dev/null
@@ -1,1988 +0,0 @@
-/* 
- * Copyright (c) Comtrol Corporation <support@comtrol.com>
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted prodived that the follwoing conditions
- * are met.
- * 1. Redistributions of source code must retain the above copyright 
- *    notive, this list of conditions and the following disclainer.
- * 2. Redistributions in binary form must reproduce the above copyright
- *    notice, this list of conditions and the following disclaimer in the
- *    documentation and/or other materials prodided with the distribution.
- * 3. All advertising materials mentioning features or use of this software
- *    must display the following acknowledgement:
- *       This product includes software developed by Comtrol Corporation.
- * 4. The name of Comtrol Corporation may not be used to endorse or 
- *    promote products derived from this software without specific 
- *    prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY COMTROL CORPORATION ``AS IS'' AND ANY
- * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
- * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
- * ARE DISCLAIMED.  IN NO EVENT SHALL COMTROL CORPORATION BE LIABLE FOR
- * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, LIFE OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
- * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
- * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
- * SUCH DAMAGE.
- *
- * $FreeBSD$
- */
-
-/* 
- * rp.c - for RocketPort FreeBSD
- */
-
-#include "opt_compat.h"
-
-#include <sys/param.h>
-#include <sys/systm.h>
-#include <sys/kernel.h>
-#include <sys/fcntl.h>
-#include <sys/malloc.h>
-#include <sys/tty.h>
-#include <sys/proc.h>
-#include <sys/conf.h>
-#include <sys/bus.h>
-
-#include <i386/isa/isa_device.h>
-
-#include <pci/pcivar.h>
-
-#define ROCKET_C
-#include <i386/isa/rpreg.h>
-#include <i386/isa/rpvar.h>
-
-#ifndef TRUE
-#define TRUE 1
-#endif
-
-#ifndef FALSE
-#define FALSE 0
-#endif
-
-static Byte_t RData[RDATASIZE] =
-{
-   0x00, 0x09, 0xf6, 0x82,
-   0x02, 0x09, 0x86, 0xfb,
-   0x04, 0x09, 0x00, 0x0a,
-   0x06, 0x09, 0x01, 0x0a,
-   0x08, 0x09, 0x8a, 0x13,
-   0x0a, 0x09, 0xc5, 0x11,
-   0x0c, 0x09, 0x86, 0x85,
-   0x0e, 0x09, 0x20, 0x0a,
-   0x10, 0x09, 0x21, 0x0a,
-   0x12, 0x09, 0x41, 0xff,
-   0x14, 0x09, 0x82, 0x00,
-   0x16, 0x09, 0x82, 0x7b,
-   0x18, 0x09, 0x8a, 0x7d,
-   0x1a, 0x09, 0x88, 0x81,
-   0x1c, 0x09, 0x86, 0x7a,
-   0x1e, 0x09, 0x84, 0x81,
-   0x20, 0x09, 0x82, 0x7c,
-   0x22, 0x09, 0x0a, 0x0a
-};
-
-static Byte_t RRegData[RREGDATASIZE]=
-{
-   0x00, 0x09, 0xf6, 0x82,	       /* 00: Stop Rx processor */
-   0x08, 0x09, 0x8a, 0x13,	       /* 04: Tx software flow control */
-   0x0a, 0x09, 0xc5, 0x11,	       /* 08: XON char */
-   0x0c, 0x09, 0x86, 0x85,	       /* 0c: XANY */
-   0x12, 0x09, 0x41, 0xff,	       /* 10: Rx mask char */
-   0x14, 0x09, 0x82, 0x00,	       /* 14: Compare/Ignore #0 */
-   0x16, 0x09, 0x82, 0x7b,	       /* 18: Compare #1 */
-   0x18, 0x09, 0x8a, 0x7d,	       /* 1c: Compare #2 */
-   0x1a, 0x09, 0x88, 0x81,	       /* 20: Interrupt #1 */
-   0x1c, 0x09, 0x86, 0x7a,	       /* 24: Ignore/Replace #1 */
-   0x1e, 0x09, 0x84, 0x81,	       /* 28: Interrupt #2 */
-   0x20, 0x09, 0x82, 0x7c,	       /* 2c: Ignore/Replace #2 */
-   0x22, 0x09, 0x0a, 0x0a	       /* 30: Rx FIFO Enable */
-};
-
-static CONTROLLER_T sController[CTL_SIZE] =
-{
-   {-1,-1,0,0,0,0,0,0,0,0,0,{0,0,0,0},{0,0,0,0},{-1,-1,-1,-1},{0,0,0,0}},
-   {-1,-1,0,0,0,0,0,0,0,0,0,{0,0,0,0},{0,0,0,0},{-1,-1,-1,-1},{0,0,0,0}},
-   {-1,-1,0,0,0,0,0,0,0,0,0,{0,0,0,0},{0,0,0,0},{-1,-1,-1,-1},{0,0,0,0}},
-   {-1,-1,0,0,0,0,0,0,0,0,0,{0,0,0,0},{0,0,0,0},{-1,-1,-1,-1},{0,0,0,0}}
-};
-
-#if 0
-/* IRQ number to MUDBAC register 2 mapping */
-Byte_t sIRQMap[16] =
-{
-   0,0,0,0x10,0x20,0x30,0,0,0,0x40,0x50,0x60,0x70,0,0,0x80
-};
-#endif
-
-static Byte_t sBitMapClrTbl[8] =
-{
-   0xfe,0xfd,0xfb,0xf7,0xef,0xdf,0xbf,0x7f
-};
-
-static Byte_t sBitMapSetTbl[8] =
-{
-   0x01,0x02,0x04,0x08,0x10,0x20,0x40,0x80
-};
-
-/***************************************************************************
-Function: sInitController
-Purpose:  Initialization of controller global registers and controller
-	  structure.
-Call:	  sInitController(CtlP,CtlNum,MudbacIO,AiopIOList,AiopIOListSize,
-			  IRQNum,Frequency,PeriodicOnly)
-	  CONTROLLER_T *CtlP; Ptr to controller structure
-	  int CtlNum; Controller number
-	  ByteIO_t MudbacIO; Mudbac base I/O address.
-	  ByteIO_t *AiopIOList; List of I/O addresses for each AIOP.
-	     This list must be in the order the AIOPs will be found on the
-	     controller.  Once an AIOP in the list is not found, it is
-	     assumed that there are no more AIOPs on the controller.
-	  int AiopIOListSize; Number of addresses in AiopIOList
-	  int IRQNum; Interrupt Request number.  Can be any of the following:
-			 0: Disable global interrupts
-			 3: IRQ 3
-			 4: IRQ 4
-			 5: IRQ 5
-			 9: IRQ 9
-			 10: IRQ 10
-			 11: IRQ 11
-			 12: IRQ 12
-			 15: IRQ 15
-	  Byte_t Frequency: A flag identifying the frequency
-		   of the periodic interrupt, can be any one of the following:
-		      FREQ_DIS - periodic interrupt disabled
-		      FREQ_137HZ - 137 Hertz
-		      FREQ_69HZ - 69 Hertz
-		      FREQ_34HZ - 34 Hertz
-		      FREQ_17HZ - 17 Hertz
-		      FREQ_9HZ - 9 Hertz
-		      FREQ_4HZ - 4 Hertz
-		   If IRQNum is set to 0 the Frequency parameter is
-		   overidden, it is forced to a value of FREQ_DIS.
-	  int PeriodicOnly: TRUE if all interrupts except the periodic
-			       interrupt are to be blocked.
-			    FALSE is both the periodic interrupt and
-			       other channel interrupts are allowed.
-			    If IRQNum is set to 0 the PeriodicOnly parameter is
-			       overidden, it is forced to a value of FALSE.
-Return:   int: Number of AIOPs on the controller, or CTLID_NULL if controller
-	       initialization failed.
-
-Comments:
-	  If periodic interrupts are to be disabled but AIOP interrupts
-	  are allowed, set Frequency to FREQ_DIS and PeriodicOnly to FALSE.
-
-	  If interrupts are to be completely disabled set IRQNum to 0.
-
-	  Setting Frequency to FREQ_DIS and PeriodicOnly to TRUE is an
-	  invalid combination.
-
-	  This function performs initialization of global interrupt modes,
-	  but it does not actually enable global interrupts.  To enable
-	  and disable global interrupts use functions sEnGlobalInt() and
-	  sDisGlobalInt().  Enabling of global interrupts is normally not
-	  done until all other initializations are complete.
-
-	  Even if interrupts are globally enabled, they must also be
-	  individually enabled for each channel that is to generate
-	  interrupts.
-
-Warnings: No range checking on any of the parameters is done.
-
-	  No context switches are allowed while executing this function.
-
-	  After this function all AIOPs on the controller are disabled,
-	  they can be enabled with sEnAiop().
-*/
-int sInitController(	CONTROLLER_T *CtlP,
-			int CtlNum,
-			ByteIO_t MudbacIO,
-			ByteIO_t *AiopIOList,
-			int AiopIOListSize,
-			int IRQNum,
-			Byte_t Frequency,
-			int PeriodicOnly)
-{
-	int		i;
-	ByteIO_t	io;
-
-   CtlP->CtlNum = CtlNum;
-   CtlP->BusType = isISA;
-   CtlP->CtlID = CTLID_0001;	    /* controller release 1 */
-
-   CtlP->MBaseIO = MudbacIO;
-   CtlP->MReg1IO = MudbacIO + 1;
-   CtlP->MReg2IO = MudbacIO + 2;
-   CtlP->MReg3IO = MudbacIO + 3;
-#if 1
-   CtlP->MReg2 = 0;		    /* interrupt disable */
-   CtlP->MReg3 = 0;		    /* no periodic interrupts */
-#else
-   if(sIRQMap[IRQNum] == 0)	       /* interrupts globally disabled */
-   {
-      CtlP->MReg2 = 0;		       /* interrupt disable */
-      CtlP->MReg3 = 0;		       /* no periodic interrupts */
-   }
-   else
-   {
-      CtlP->MReg2 = sIRQMap[IRQNum];   /* set IRQ number */
-      CtlP->MReg3 = Frequency;	       /* set frequency */
-      if(PeriodicOnly)		       /* periodic interrupt only */
-      {
-	 CtlP->MReg3 |= PERIODIC_ONLY;
-      }
-   }
-#endif
-   sOutB(CtlP->MReg2IO,CtlP->MReg2);
-   sOutB(CtlP->MReg3IO,CtlP->MReg3);
-   sControllerEOI(CtlP);	       /* clear EOI if warm init */
-
-   /* Init AIOPs */
-   CtlP->NumAiop = 0;
-   for(i=0; i < AiopIOListSize; i++)
-   {
-      io = AiopIOList[i];
-      CtlP->AiopIO[i] = (WordIO_t)io;
-      CtlP->AiopIntChanIO[i] = io + _INT_CHAN;
-      sOutB(CtlP->MReg2IO,CtlP->MReg2 | (i & 0x03)); /* AIOP index */
-      sOutB(MudbacIO,(Byte_t)(io >> 6));	/* set up AIOP I/O in MUDBAC */
-      sEnAiop(CtlP,i);			       /* enable the AIOP */
-
-      CtlP->AiopID[i] = sReadAiopID(io);       /* read AIOP ID */
-      if(CtlP->AiopID[i] == AIOPID_NULL)       /* if AIOP does not exist */
-      {
-	 sDisAiop(CtlP,i);		       /* disable AIOP */
-	 break; 			       /* done looking for AIOPs */
-      }
-
-      CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t)io); /* num channels in AIOP */
-      sOutW((WordIO_t)io + _INDX_ADDR,_CLK_PRE);      /* clock prescaler */
-      sOutB(io + _INDX_DATA,CLOCK_PRESC);
-      CtlP->NumAiop++;			       /* bump count of AIOPs */
-      sDisAiop(CtlP,i); 		       /* disable AIOP */
-   }
-
-   if(CtlP->NumAiop == 0)
-      return(-1);
-   else
-      return(CtlP->NumAiop);
-}
-
-int sPCIInitController( CONTROLLER_T *CtlP,
-			int CtlNum,
-			ByteIO_t *AiopIOList,
-			int AiopIOListSize,
-			int IRQNum,
-			Byte_t Frequency,
-			int PeriodicOnly)
-{
-	int		i;
-	ByteIO_t	io;
-
-   CtlP->CtlNum = CtlNum;
-   CtlP->BusType = isPCI;
-   CtlP->CtlID = CTLID_0001;	    /* controller release 1 */
-   CtlP->PCIIO = (WordIO_t)((ByteIO_t)AiopIOList[0] + _PCI_INT_FUNC);
-
-   sPCIControllerEOI(CtlP);
-
-   /* Init AIOPs */
-   CtlP->NumAiop = 0;
-   for(i=0; i < AiopIOListSize; i++)
-   {
-      io = AiopIOList[i];
-      CtlP->AiopIO[i] = (WordIO_t)io;
-      CtlP->AiopIntChanIO[i] = io + _INT_CHAN;
-
-      CtlP->AiopID[i] = sReadAiopID(io);       /* read AIOP ID */
-      if(CtlP->AiopID[i] == AIOPID_NULL)       /* if AIOP does not exist */
-      {
-	 break; 			       /* done looking for AIOPs */
-      }
-
-      CtlP->AiopNumChan[i] = sReadAiopNumChan((WordIO_t)io); /* num channels in AIOP */
-      sOutW((WordIO_t)io + _INDX_ADDR,_CLK_PRE);      /* clock prescaler */
-      sOutB(io + _INDX_DATA,CLOCK_PRESC);
-      CtlP->NumAiop++;			       /* bump count of AIOPs */
-   }
-
-   if(CtlP->NumAiop == 0)
-      return(-1);
-   else
-      return(CtlP->NumAiop);
-}
-
-/***************************************************************************
-Function: sReadAiopID
-Purpose:  Read the AIOP idenfication number directly from an AIOP.
-Call:	  sReadAiopID(io)
-	  ByteIO_t io: AIOP base I/O address
-Return:   int: Flag AIOPID_XXXX if a valid AIOP is found, where X
-		 is replace by an identifying number.
-	  Flag AIOPID_NULL if no valid AIOP is found
-Warnings: No context switches are allowed while executing this function.
-
-*/
-int sReadAiopID(ByteIO_t io)
-{
-   Byte_t AiopID;		/* ID byte from AIOP */
-
-   sOutB(io + _CMD_REG,RESET_ALL);     /* reset AIOP */
-   sOutB(io + _CMD_REG,0x0);
-   AiopID = sInB(io + _CHN_STAT0) & 0x07;
-   if(AiopID == 0x06)
-      return(1);
-   else 			       /* AIOP does not exist */
-      return(-1);
-}
-
-/***************************************************************************
-Function: sReadAiopNumChan
-Purpose:  Read the number of channels available in an AIOP directly from
-	  an AIOP.
-Call:	  sReadAiopNumChan(io)
-	  WordIO_t io: AIOP base I/O address
-Return:   int: The number of channels available
-Comments: The number of channels is determined by write/reads from identical
-	  offsets within the SRAM address spaces for channels 0 and 4.
-	  If the channel 4 space is mirrored to channel 0 it is a 4 channel
-	  AIOP, otherwise it is an 8 channel.
-Warnings: No context switches are allowed while executing this function.
-*/
-int sReadAiopNumChan(WordIO_t io)
-{
-   Word_t x;
-
-   sOutDW((DWordIO_t)io + _INDX_ADDR,0x12340000L); /* write to chan 0 SRAM */
-   sOutW(io + _INDX_ADDR,0);	   /* read from SRAM, chan 0 */
-   x = sInW(io + _INDX_DATA);
-   sOutW(io + _INDX_ADDR,0x4000);  /* read from SRAM, chan 4 */
-   if(x != sInW(io + _INDX_DATA))  /* if different must be 8 chan */
-      return(8);
-   else
-      return(4);
-}
-
-/***************************************************************************
-Function: sInitChan
-Purpose:  Initialization of a channel and channel structure
-Call:	  sInitChan(CtlP,ChP,AiopNum,ChanNum)
-	  CONTROLLER_T *CtlP; Ptr to controller structure
-	  CHANNEL_T *ChP; Ptr to channel structure
-	  int AiopNum; AIOP number within controller
-	  int ChanNum; Channel number within AIOP
-Return:   int: TRUE if initialization succeeded, FALSE if it fails because channel
-	       number exceeds number of channels available in AIOP.
-Comments: This function must be called before a channel can be used.
-Warnings: No range checking on any of the parameters is done.
-
-	  No context switches are allowed while executing this function.
-*/
-int sInitChan(	CONTROLLER_T *CtlP,
-		CHANNEL_T *ChP,
-		int AiopNum,
-		int ChanNum)
-{
-   int i;
-   WordIO_t AiopIO;
-   WordIO_t ChIOOff;
-   Byte_t *ChR;
-   Word_t ChOff;
-   static Byte_t R[4];
-
-   if(ChanNum >= CtlP->AiopNumChan[AiopNum])
-      return(FALSE);		       /* exceeds num chans in AIOP */
-
-   /* Channel, AIOP, and controller identifiers */
-   ChP->CtlP = CtlP;
-   ChP->ChanID = CtlP->AiopID[AiopNum];
-   ChP->AiopNum = AiopNum;
-   ChP->ChanNum = ChanNum;
-
-   /* Global direct addresses */
-   AiopIO = CtlP->AiopIO[AiopNum];
-   ChP->Cmd = (ByteIO_t)AiopIO + _CMD_REG;
-   ChP->IntChan = (ByteIO_t)AiopIO + _INT_CHAN;
-   ChP->IntMask = (ByteIO_t)AiopIO + _INT_MASK;
-   ChP->IndexAddr = (DWordIO_t)AiopIO + _INDX_ADDR;
-   ChP->IndexData = AiopIO + _INDX_DATA;
-
-   /* Channel direct addresses */
-   ChIOOff = AiopIO + ChP->ChanNum * 2;
-   ChP->TxRxData = ChIOOff + _TD0;
-   ChP->ChanStat = ChIOOff + _CHN_STAT0;
-   ChP->TxRxCount = ChIOOff + _FIFO_CNT0;
-   ChP->IntID = (ByteIO_t)AiopIO + ChP->ChanNum + _INT_ID0;
-
-   /* Initialize the channel from the RData array */
-   for(i=0; i < RDATASIZE; i+=4)
-   {
-      R[0] = RData[i];
-      R[1] = RData[i+1] + 0x10 * ChanNum;
-      R[2] = RData[i+2];
-      R[3] = RData[i+3];
-      sOutDW(ChP->IndexAddr,*((DWord_t *)&R[0]));
-   }
-
-   ChR = ChP->R;
-   for(i=0; i < RREGDATASIZE; i+=4)
-   {
-      ChR[i] = RRegData[i];
-      ChR[i+1] = RRegData[i+1] + 0x10 * ChanNum;
-      ChR[i+2] = RRegData[i+2];
-      ChR[i+3] = RRegData[i+3];
-   }
-
-   /* Indexed registers */
-   ChOff = (Word_t)ChanNum * 0x1000;
-
-   ChP->BaudDiv[0] = (Byte_t)(ChOff + _BAUD);
-   ChP->BaudDiv[1] = (Byte_t)((ChOff + _BAUD) >> 8);
-   ChP->BaudDiv[2] = (Byte_t)BRD9600;
-   ChP->BaudDiv[3] = (Byte_t)(BRD9600 >> 8);
-   sOutDW(ChP->IndexAddr,*(DWord_t *)&ChP->BaudDiv[0]);
-
-   ChP->TxControl[0] = (Byte_t)(ChOff + _TX_CTRL);
-   ChP->TxControl[1] = (Byte_t)((ChOff + _TX_CTRL) >> 8);
-   ChP->TxControl[2] = 0;
-   ChP->TxControl[3] = 0;
-   sOutDW(ChP->IndexAddr,*(DWord_t *)&ChP->TxControl[0]);
-
-   ChP->RxControl[0] = (Byte_t)(ChOff + _RX_CTRL);
-   ChP->RxControl[1] = (Byte_t)((ChOff + _RX_CTRL) >> 8);
-   ChP->RxControl[2] = 0;
-   ChP->RxControl[3] = 0;
-   sOutDW(ChP->IndexAddr,*(DWord_t *)&ChP->RxControl[0]);
-
-   ChP->TxEnables[0] = (Byte_t)(ChOff + _TX_ENBLS);
-   ChP->TxEnables[1] = (Byte_t)((ChOff + _TX_ENBLS) >> 8);
-   ChP->TxEnables[2] = 0;
-   ChP->TxEnables[3] = 0;
-   sOutDW(ChP->IndexAddr,*(DWord_t *)&ChP->TxEnables[0]);
-
-   ChP->TxCompare[0] = (Byte_t)(ChOff + _TXCMP1);
-   ChP->TxCompare[1] = (Byte_t)((ChOff + _TXCMP1) >> 8);
-   ChP->TxCompare[2] = 0;
-   ChP->TxCompare[3] = 0;
-   sOutDW(ChP->IndexAddr,*(DWord_t *)&ChP->TxCompare[0]);
-
-   ChP->TxReplace1[0] = (Byte_t)(ChOff + _TXREP1B1);
-   ChP->TxReplace1[1] = (Byte_t)((ChOff + _TXREP1B1) >> 8);
-   ChP->TxReplace1[2] = 0;
-   ChP->TxReplace1[3] = 0;
-   sOutDW(ChP->IndexAddr,*(DWord_t *)&ChP->TxReplace1[0]);
-
-   ChP->TxReplace2[0] = (Byte_t)(ChOff + _TXREP2);
-   ChP->TxReplace2[1] = (Byte_t)((ChOff + _TXREP2) >> 8);
-   ChP->TxReplace2[2] = 0;
-   ChP->TxReplace2[3] = 0;
-   sOutDW(ChP->IndexAddr,*(DWord_t *)&ChP->TxReplace2[0]);
-
-   ChP->TxFIFOPtrs = ChOff + _TXF_OUTP;
-   ChP->TxFIFO = ChOff + _TX_FIFO;
-
-   sOutB(ChP->Cmd,(Byte_t)ChanNum | RESTXFCNT); /* apply reset Tx FIFO count */
-   sOutB(ChP->Cmd,(Byte_t)ChanNum);  /* remove reset Tx FIFO count */
-   sOutW((WordIO_t)ChP->IndexAddr,ChP->TxFIFOPtrs); /* clear Tx in/out ptrs */
-   sOutW(ChP->IndexData,0);
-   ChP->RxFIFOPtrs = ChOff + _RXF_OUTP;
-   ChP->RxFIFO = ChOff + _RX_FIFO;
-
-   sOutB(ChP->Cmd,(Byte_t)ChanNum | RESRXFCNT); /* apply reset Rx FIFO count */
-   sOutB(ChP->Cmd,(Byte_t)ChanNum);  /* remove reset Rx FIFO count */
-   sOutW((WordIO_t)ChP->IndexAddr,ChP->RxFIFOPtrs); /* clear Rx out ptr */
-   sOutW(ChP->IndexData,0);
-   sOutW((WordIO_t)ChP->IndexAddr,ChP->RxFIFOPtrs + 2); /* clear Rx in ptr */
-   sOutW(ChP->IndexData,0);
-   ChP->TxPrioCnt = ChOff + _TXP_CNT;
-   sOutW((WordIO_t)ChP->IndexAddr,ChP->TxPrioCnt);
-   sOutB(ChP->IndexData,0);
-   ChP->TxPrioPtr = ChOff + _TXP_PNTR;
-   sOutW((WordIO_t)ChP->IndexAddr,ChP->TxPrioPtr);
-   sOutB(ChP->IndexData,0);
-   ChP->TxPrioBuf = ChOff + _TXP_BUF;
-   sEnRxProcessor(ChP); 	       /* start the Rx processor */
-
-   return(TRUE);
-}
-
-/***************************************************************************
-Function: sStopRxProcessor
-Purpose:  Stop the receive processor from processing a channel.
-Call:	  sStopRxProcessor(ChP)
-	  CHANNEL_T *ChP; Ptr to channel structure
-
-Comments: The receive processor can be started again with sStartRxProcessor().
-	  This function causes the receive processor to skip over the
-	  stopped channel.  It does not stop it from processing other channels.
-
-Warnings: No context switches are allowed while executing this function.
-
-	  Do not leave the receive processor stopped for more than one
-	  character time.
-
-	  After calling this function a delay of 4 uS is required to ensure
-	  that the receive processor is no longer processing this channel.
-*/
-void sStopRxProcessor(CHANNEL_T *ChP)
-{
-   Byte_t R[4];
-
-   R[0] = ChP->R[0];
-   R[1] = ChP->R[1];
-   R[2] = 0x0a;
-   R[3] = ChP->R[3];
-   sOutDW(ChP->IndexAddr,*(DWord_t *)&R[0]);
-}
-
-/***************************************************************************
-Function: sFlushRxFIFO
-Purpose:  Flush the Rx FIFO
-Call:	  sFlushRxFIFO(ChP)
-	  CHANNEL_T *ChP; Ptr to channel structure
-Return:   void
-Comments: To prevent data from being enqueued or dequeued in the Tx FIFO
-	  while it is being flushed the receive processor is stopped
-	  and the transmitter is disabled.  After these operations a
-	  4 uS delay is done before clearing the pointers to allow
-	  the receive processor to stop.  These items are handled inside
-	  this function.
-Warnings: No context switches are allowed while executing this function.
-*/
-void sFlushRxFIFO(CHANNEL_T *ChP)
-{
-   int i;
-   Byte_t Ch;			/* channel number within AIOP */
-   int RxFIFOEnabled;		       /* TRUE if Rx FIFO enabled */
-
-   if(sGetRxCnt(ChP) == 0)	       /* Rx FIFO empty */
-      return;			       /* don't need to flush */
-
-   RxFIFOEnabled = FALSE;
-   if(ChP->R[0x32] == 0x08) /* Rx FIFO is enabled */
-   {
-      RxFIFOEnabled = TRUE;
-      sDisRxFIFO(ChP);		       /* disable it */
-      for(i=0; i < 2000/200; i++)	/* delay 2 uS to allow proc to disable FIFO*/
-	 sInB(ChP->IntChan);		/* depends on bus i/o timing */
-   }
-   sGetChanStatus(ChP); 	 /* clear any pending Rx errors in chan stat */
-   Ch = (Byte_t)sGetChanNum(ChP);
-   sOutB(ChP->Cmd,Ch | RESRXFCNT);     /* apply reset Rx FIFO count */
-   sOutB(ChP->Cmd,Ch);		       /* remove reset Rx FIFO count */
-   sOutW((WordIO_t)ChP->IndexAddr,ChP->RxFIFOPtrs); /* clear Rx out ptr */
-   sOutW(ChP->IndexData,0);
-   sOutW((WordIO_t)ChP->IndexAddr,ChP->RxFIFOPtrs + 2); /* clear Rx in ptr */
-   sOutW(ChP->IndexData,0);
-   if(RxFIFOEnabled)
-      sEnRxFIFO(ChP);		       /* enable Rx FIFO */
-}
-
-/***************************************************************************
-Function: sFlushTxFIFO
-Purpose:  Flush the Tx FIFO
-Call:	  sFlushTxFIFO(ChP)
-	  CHANNEL_T *ChP; Ptr to channel structure
-Return:   void
-Comments: To prevent data from being enqueued or dequeued in the Tx FIFO
-	  while it is being flushed the receive processor is stopped
-	  and the transmitter is disabled.  After these operations a
-	  4 uS delay is done before clearing the pointers to allow
-	  the receive processor to stop.  These items are handled inside
-	  this function.
-Warnings: No context switches are allowed while executing this function.
-*/
-void sFlushTxFIFO(CHANNEL_T *ChP)
-{
-   int i;
-   Byte_t Ch;			/* channel number within AIOP */
-   int TxEnabled;		       /* TRUE if transmitter enabled */
-
-   if(sGetTxCnt(ChP) == 0)	       /* Tx FIFO empty */
-      return;			       /* don't need to flush */
-
-   TxEnabled = FALSE;
-   if(ChP->TxControl[3] & TX_ENABLE)
-   {
-      TxEnabled = TRUE;
-      sDisTransmit(ChP);	       /* disable transmitter */
-   }
-   sStopRxProcessor(ChP);	       /* stop Rx processor */
-   for(i = 0; i < 4000/200; i++)	 /* delay 4 uS to allow proc to stop */
-      sInB(ChP->IntChan);	/* depends on bus i/o timing */
-   Ch = (Byte_t)sGetChanNum(ChP);
-   sOutB(ChP->Cmd,Ch | RESTXFCNT);     /* apply reset Tx FIFO count */
-   sOutB(ChP->Cmd,Ch);		       /* remove reset Tx FIFO count */
-   sOutW((WordIO_t)ChP->IndexAddr,ChP->TxFIFOPtrs); /* clear Tx in/out ptrs */
-   sOutW(ChP->IndexData,0);
-   if(TxEnabled)
-      sEnTransmit(ChP); 	       /* enable transmitter */
-   sStartRxProcessor(ChP);	       /* restart Rx processor */
-}
-
-/***************************************************************************
-Function: sWriteTxPrioByte
-Purpose:  Write a byte of priority transmit data to a channel
-Call:	  sWriteTxPrioByte(ChP,Data)
-	  CHANNEL_T *ChP; Ptr to channel structure
-	  Byte_t Data; The transmit data byte
-
-Return:   int: 1 if the bytes is successfully written, otherwise 0.
-
-Comments: The priority byte is transmitted before any data in the Tx FIFO.
-
-Warnings: No context switches are allowed while executing this function.
-*/
-int sWriteTxPrioByte(CHANNEL_T *ChP, Byte_t Data)
-{
-   Byte_t DWBuf[4];		/* buffer for double word writes */
-   Word_t *WordPtr;	     /* must be far because Win SS != DS */
-   register DWordIO_t IndexAddr;
-
-   if(sGetTxCnt(ChP) > 1)	       /* write it to Tx priority buffer */
-   {
-      IndexAddr = ChP->IndexAddr;
-      sOutW((WordIO_t)IndexAddr,ChP->TxPrioCnt); /* get priority buffer status */
-      if(sInB((ByteIO_t)ChP->IndexData) & PRI_PEND) /* priority buffer busy */
-	 return(0);		       /* nothing sent */
-
-      WordPtr = (Word_t *)(&DWBuf[0]);
-      *WordPtr = ChP->TxPrioBuf;       /* data byte address */
-
-      DWBuf[2] = Data;		       /* data byte value */
-      sOutDW(IndexAddr,*((DWord_t *)(&DWBuf[0]))); /* write it out */
-
-      *WordPtr = ChP->TxPrioCnt;       /* Tx priority count address */
-
-      DWBuf[2] = PRI_PEND + 1;	       /* indicate 1 byte pending */
-      DWBuf[3] = 0;		       /* priority buffer pointer */
-      sOutDW(IndexAddr,*((DWord_t *)(&DWBuf[0]))); /* write it out */
-   }
-   else 			       /* write it to Tx FIFO */
-   {
-      sWriteTxByte(sGetTxRxDataIO(ChP),Data);
-   }
-   return(1);			       /* 1 byte sent */
-}
-
-/***************************************************************************
-Function: sEnInterrupts
-Purpose:  Enable one or more interrupts for a channel
-Call:	  sEnInterrupts(ChP,Flags)
-	  CHANNEL_T *ChP; Ptr to channel structure
-	  Word_t Flags: Interrupt enable flags, can be any combination
-	     of the following flags:
-		TXINT_EN:   Interrupt on Tx FIFO empty
-		RXINT_EN:   Interrupt on Rx FIFO at trigger level (see
-			    sSetRxTrigger())
-		SRCINT_EN:  Interrupt on SRC (Special Rx Condition)
-		MCINT_EN:   Interrupt on modem input change
-		CHANINT_EN: Allow channel interrupt signal to the AIOP's
-			    Interrupt Channel Register.
-Return:   void
-Comments: If an interrupt enable flag is set in Flags, that interrupt will be
-	  enabled.  If an interrupt enable flag is not set in Flags, that
-	  interrupt will not be changed.  Interrupts can be disabled with
-	  function sDisInterrupts().
-
-	  This function sets the appropriate bit for the channel in the AIOP's
-	  Interrupt Mask Register if the CHANINT_EN flag is set.  This allows
-	  this channel's bit to be set in the AIOP's Interrupt Channel Register.
-
-	  Interrupts must also be globally enabled before channel interrupts
-	  will be passed on to the host.  This is done with function
-	  sEnGlobalInt().
-
-	  In some cases it may be desirable to disable interrupts globally but
-	  enable channel interrupts.  This would allow the global interrupt
-	  status register to be used to determine which AIOPs need service.
-*/
-void sEnInterrupts(CHANNEL_T *ChP,Word_t Flags)
-{
-   Byte_t Mask; 		/* Interrupt Mask Register */
-
-   ChP->RxControl[2] |=
-      ((Byte_t)Flags & (RXINT_EN | SRCINT_EN | MCINT_EN));
-
-   sOutDW(ChP->IndexAddr,*(DWord_t *)&ChP->RxControl[0]);
-
-   ChP->TxControl[2] |= ((Byte_t)Flags & TXINT_EN);
-
-   sOutDW(ChP->IndexAddr,*(DWord_t *)&ChP->TxControl[0]);
-
-   if(Flags & CHANINT_EN)
-   {
-      Mask = sInB(ChP->IntMask) | sBitMapSetTbl[ChP->ChanNum];
-      sOutB(ChP->IntMask,Mask);
-   }
-}
-
-/***************************************************************************
-Function: sDisInterrupts
-Purpose:  Disable one or more interrupts for a channel
-Call:	  sDisInterrupts(ChP,Flags)
-	  CHANNEL_T *ChP; Ptr to channel structure
-	  Word_t Flags: Interrupt flags, can be any combination
-	     of the following flags:
-		TXINT_EN:   Interrupt on Tx FIFO empty
-		RXINT_EN:   Interrupt on Rx FIFO at trigger level (see
-			    sSetRxTrigger())
-		SRCINT_EN:  Interrupt on SRC (Special Rx Condition)
-		MCINT_EN:   Interrupt on modem input change
-		CHANINT_EN: Disable channel interrupt signal to the
-			    AIOP's Interrupt Channel Register.
-Return:   void
-Comments: If an interrupt flag is set in Flags, that interrupt will be
-	  disabled.  If an interrupt flag is not set in Flags, that
-	  interrupt will not be changed.  Interrupts can be enabled with
-	  function sEnInterrupts().
-
-	  This function clears the appropriate bit for the channel in the AIOP's
-	  Interrupt Mask Register if the CHANINT_EN flag is set.  This blocks
-	  this channel's bit from being set in the AIOP's Interrupt Channel
-	  Register.
-*/
-void sDisInterrupts(CHANNEL_T *ChP,Word_t Flags)
-{
-   Byte_t Mask; 		/* Interrupt Mask Register */
-
-   ChP->RxControl[2] &=
-	 ~((Byte_t)Flags & (RXINT_EN | SRCINT_EN | MCINT_EN));
-   sOutDW(ChP->IndexAddr,*(DWord_t *)&ChP->RxControl[0]);
-   ChP->TxControl[2] &= ~((Byte_t)Flags & TXINT_EN);
-   sOutDW(ChP->IndexAddr,*(DWord_t *)&ChP->TxControl[0]);
-
-   if(Flags & CHANINT_EN)
-   {
-      Mask = sInB(ChP->IntMask) & sBitMapClrTbl[ChP->ChanNum];
-      sOutB(ChP->IntMask,Mask);
-   }
-}
-
-/*********************************************************************
-  Begin FreeBsd-specific driver code
-**********************************************************************/
-
-static int rpprobe __P((struct isa_device *));
-static int rpattach __P((struct isa_device *));
-
-static const char* rp_pciprobe(pcici_t tag, pcidi_t type);
-static void rp_pciattach(pcici_t tag, int unit);
-static u_long	rp_pcicount;
-
-static struct pci_device rp_pcidevice = {
-	"rp",
-	rp_pciprobe,
-	rp_pciattach,
-	&rp_pcicount,
-	NULL
-};
-
-COMPAT_PCI_DRIVER (rp_pci, rp_pcidevice);
-
-static timeout_t rpdtrwakeup;
-
-struct isa_driver rpdriver = {
-	INTR_TYPE_TTY,
-	rpprobe,
-	rpattach,
-	"rp"
-};
-COMPAT_ISA_DRIVER(rp, rpdriver);
-
-static	char	driver_name[] = "rp";
-
-static	d_open_t	rpopen;
-static	d_close_t	rpclose;
-static	d_write_t	rpwrite;
-static	d_ioctl_t	rpioctl;
-
-#define	CDEV_MAJOR	81
-static struct cdevsw rp_cdevsw = {
-	/* open */	rpopen,
-	/* close */	rpclose,
-	/* read */	ttyread,
-	/* write */	rpwrite,
-	/* ioctl */	rpioctl,
-	/* poll */	ttypoll,
-	/* mmap */	nommap,
-	/* strategy */	nostrategy,
-	/* name */	driver_name,
-	/* maj */	CDEV_MAJOR,
-	/* dump */	nodump,
-	/* psize */	nopsize,
-	/* flags */	D_TTY | D_KQFILTER,
-	/* kqfilter */	ttykqfilter,
-};
-
-static int rp_controller_port = 0;
-static int rp_num_ports_open = 0;
-static int	ndevs = 0;
-static int	minor_to_unit[128];
-#if 0
-static	struct	tty	rp_tty[128];
-#endif
-
-static int rp_num_ports[4];	/* Number of ports on each controller */
-
-#define _INLINE_ __inline
-#define POLL_INTERVAL 1
-
-#define CALLOUT_MASK		0x80
-#define CONTROL_MASK		0x60
-#define CONTROL_INIT_STATE	0x20
-#define CONTROL_LOCK_STATE	0x40
-#define DEV_UNIT(dev)	(MINOR_TO_UNIT(minor(dev))
-#define MINOR_MAGIC_MASK	(CALLOUT_MASK | CONTROL_MASK)
-#define MINOR_MAGIC(dev)	((minor(dev)) & ~MINOR_MAGIC_MASK)
-#define IS_CALLOUT(dev) 	(minor(dev) & CALLOUT_MASK)
-#define IS_CONTROL(dev) 	(minor(dev) & CONTROL_MASK)
-
-#define RP_ISMULTIPORT(dev)	((dev)->id_flags & 0x1)
-#define RP_MPMASTER(dev)	(((dev)->id_flags >> 8) & 0xff)
-#define RP_NOTAST4(dev) 	((dev)->id_flags & 0x04)
-
-static	struct	rp_port *p_rp_addr[4];
-static	struct	rp_port *p_rp_table[MAX_RP_PORTS];
-#define rp_addr(unit)	(p_rp_addr[unit])
-#define rp_table(port)	(p_rp_table[port])
-
-/*
- * The top-level routines begin here
- */
-
-static	int	rpparam __P((struct tty *, struct termios *));
-static	void	rpstart __P((struct tty *));
-static	void	rpstop __P((struct tty *, int));
-static	void	rphardclose	__P((struct rp_port *));
-static	void	rp_disc_optim	__P((struct tty *tp, struct termios *t,
-						struct rp_port	*rp));
-
-static _INLINE_ void rp_do_receive(struct rp_port *rp, struct tty *tp,
-			CHANNEL_t *cp, unsigned int ChanStatus)
-{
-	int	spl;
-	unsigned	int	CharNStat;
-	int	ToRecv, ch;
-
-	ToRecv = sGetRxCnt(cp);
-	if(ToRecv == 0)
-		return;
-
-/*	If status indicates there are errored characters in the
-	FIFO, then enter status mode (a word in FIFO holds
-	characters and status)
-*/
-
-	if(ChanStatus & (RXFOVERFL | RXBREAK | RXFRAME | RXPARITY)) {
-		if(!(ChanStatus & STATMODE)) {
-			ChanStatus |= STATMODE;
-			sEnRxStatusMode(cp);
-		}
-	}
-/*
-	if we previously entered status mode then read down the
-	FIFO one word at a time, pulling apart the character and
-	the status. Update error counters depending on status.
-*/
-	if(ChanStatus & STATMODE) {
-		while(ToRecv) {
-			if(tp->t_state & TS_TBLOCK) {
-				break;
-			}
-			CharNStat = sInW(sGetTxRxDataIO(cp));
-			ch = CharNStat & 0xff;
-
-			if((CharNStat & STMBREAK) || (CharNStat & STMFRAMEH))
-				ch |= TTY_FE;
-			else if (CharNStat & STMPARITYH)
-				ch |= TTY_PE;
-			else if (CharNStat & STMRCVROVRH)
-				rp->rp_overflows++;
-
-			(*linesw[tp->t_line].l_rint)(ch, tp);
-			ToRecv--;
-		}
-/*
-	After emtying FIFO in status mode, turn off status mode
-*/
-
-	if(sGetRxCnt(cp) == 0)
-		sDisRxStatusMode(cp);
-	}
-	else {
-		while (ToRecv) {
-			if(tp->t_state & TS_TBLOCK) {
-				break;
-			}
-			ch = (u_char) sInB(sGetTxRxDataIO(cp));
-			spl = spltty();
-			(*linesw[tp->t_line].l_rint)(ch, tp);
-			splx(spl);
-			ToRecv--;
-		}
-	}
-}
-
-static _INLINE_ void rp_handle_port(struct rp_port *rp)
-{
-	CHANNEL_t	*cp;
-	struct	tty	*tp;
-	unsigned	int	IntMask, ChanStatus;
-     /*	int	oldcts; */
-
-	if(!rp)
-		return;
-
-	cp = &rp->rp_channel;
-	tp = rp->rp_tty;
-	IntMask = sGetChanIntID(cp);
-	IntMask = IntMask & rp->rp_intmask;
-	ChanStatus = sGetChanStatus(cp);
-	if(IntMask & RXF_TRIG)
-		if(!(tp->t_state & TS_TBLOCK) && (tp->t_state & TS_CARR_ON) && (tp->t_state & TS_ISOPEN)) {
-			rp_do_receive(rp, tp, cp, ChanStatus);
-		}
-	if(IntMask & DELTA_CD) {
-		if(ChanStatus & CD_ACT) {
-			if(!(tp->t_state & TS_CARR_ON) ) {
-				(void)(*linesw[tp->t_line].l_modem)(tp, 1);
-			}
-		} else {
-			if((tp->t_state & TS_CARR_ON)) {
-				(void)(*linesw[tp->t_line].l_modem)(tp, 0);
-				if((*linesw[tp->t_line].l_modem)(tp, 0) == 0) {
-					rphardclose(rp);
-				}
-			}
-		}
-	}
-/*	oldcts = rp->rp_cts;
-	rp->rp_cts = ((ChanStatus & CTS_ACT) != 0);
-	if(oldcts != rp->rp_cts) {
-		printf("CTS change (now %s)... on port %d\n", rp->rp_cts ? "on" : "off", rp->rp_port);
-	}
-*/
-}
-
-static void rp_do_poll(void *not_used)
-{
-	CONTROLLER_t	*ctl;
-	struct rp_port	*rp;
-	struct tty	*tp;
-	int	unit, aiop, ch, line, count;
-	unsigned char	CtlMask, AiopMask;
-
-	for(unit = 0; unit <= ndevs; unit++) {
-	rp = rp_addr(unit);
-	ctl = rp->rp_ctlp;
-	if(ctl->BusType == isPCI)
-		CtlMask = sPCIGetControllerIntStatus(ctl);
-	else
-		CtlMask = sGetControllerIntStatus(ctl);
-	for(aiop=0; CtlMask; CtlMask >>=1, aiop++) {
-		if(CtlMask & 1) {
-			AiopMask = sGetAiopIntStatus(ctl, aiop);
-			for(ch = 0; AiopMask; AiopMask >>=1, ch++) {
-				if(AiopMask & 1) {
-					line = (unit << 5) | (aiop << 3) | ch;
-					rp = rp_table(line);
-					rp_handle_port(rp);
-				}
-			}
-		}
-	}
-
-	for(line = 0, rp = rp_addr(unit); line < rp_num_ports[unit];
-			line++, rp++) {
-		tp = rp->rp_tty;
-		if((tp->t_state & TS_BUSY) && (tp->t_state & TS_ISOPEN)) {
-			count = sGetTxCnt(&rp->rp_channel);
-			if(count == 0)
-				tp->t_state &= ~(TS_BUSY);
-			if(!(tp->t_state & TS_TTSTOP) &&
-				(count <= rp->rp_restart)) {
-				(*linesw[tp->t_line].l_start)(tp);
-			}
-		}
-	}
-	}
-	if(rp_num_ports_open)
-		timeout(rp_do_poll, (void *)NULL, POLL_INTERVAL);
-}
-
-static const char*
-rp_pciprobe(pcici_t tag, pcidi_t type)
-{
-	int	vendor_id;
-
-	vendor_id = type & 0xffff;
-	switch(vendor_id)
-	case 0x11fe:
-		return("rp");
-	return(NULL);
-}
-
-static
-int
-rpprobe(dev)
-struct isa_device *dev;
-{
-	int controller, unit;
-	int aiop, num_aiops;
-	unsigned int aiopio[MAX_AIOPS_PER_BOARD];
-	CONTROLLER_t *ctlp;
-
-	unit = dev->id_unit;
-	if (dev->id_unit >= 4) {
-		printf("rpprobe: unit number %d invalid.\n", dev->id_unit);
-		return 1;
-	}
-	printf("probing for RocketPort(ISA) unit %d\n", unit);
-	if (rp_controller_port)
-		controller = rp_controller_port;
-	else {
-		controller = dev->id_iobase + 0x40;
-	}
-
-	for (aiop=0; aiop<MAX_AIOPS_PER_BOARD; aiop++)
-		aiopio[aiop]= dev->id_iobase + (aiop * 0x400);
-
-	ctlp = sCtlNumToCtlPtr(dev->id_unit);
-	num_aiops = sInitController(ctlp, dev->id_unit,
-				controller + ((unit-rp_pcicount)*0x400),
-				aiopio, MAX_AIOPS_PER_BOARD, 0,
-				FREQ_DIS, 0);
-	if (num_aiops <= 0) {
-		printf("board%d init failed\n", unit);
-		return 0;
-	}
-
-	if (rp_controller_port) {
-		dev->id_msize = 64;
-	} else {
-		dev->id_msize = 68;
-		rp_controller_port = controller;
-	}
-
-	dev->id_irq = 0;
-
-	return 1;
-}
-
-static void
-rp_pciattach(pcici_t tag, int unit)
-{
-	int	success, oldspl;
-	u_short iobase;
-	int	num_ports, num_chan, num_aiops;
-	int	aiop, chan, port;
-	int	ChanStatus, line, i, count;
-	unsigned int	aiopio[MAX_AIOPS_PER_BOARD];
-	struct	rp_port *rp;
-	struct	tty	*tty;
-	CONTROLLER_t	*ctlp;
-
-	success = pci_map_port(tag, 0x10, &iobase);
-	if(!success)
-		printf("ioaddr mapping failed for RocketPort(PCI)\n");
-
-	for(aiop=0; aiop < MAX_AIOPS_PER_BOARD; aiop++)
-		aiopio[aiop] = iobase + (aiop * 0x40);
-
-	ctlp = sCtlNumToCtlPtr(unit);
-	num_aiops = sPCIInitController(ctlp, unit,
-				aiopio, MAX_AIOPS_PER_BOARD, 0,
-				FREQ_DIS, 0);
-
-	num_ports = 0;
-	for(aiop=0; aiop < num_aiops; aiop++) {
-		sResetAiopByNum(ctlp, aiop);
-		num_ports += sGetAiopNumChan(ctlp, aiop);
-	}
-	printf("RocketPort%d = %d ports\n", unit, num_ports);
-	rp_num_ports[unit] = num_ports;
-
-	rp = (struct rp_port *)
-	    malloc(sizeof(struct rp_port) * num_ports, M_TTYS, M_NOWAIT|M_ZERO);
-	if(rp == 0) {
-		printf("rp_attach: Could not malloc rp_ports structures\n");
-		return;
-	}
-
-	count = unit * 32;      /* board times max ports per card SG */
-	for(i=count;i < (count + rp_num_ports[unit]);i++)
-		minor_to_unit[i] = unit;
-
-	tty = (struct tty *)
-	    malloc(sizeof(struct tty) * num_ports, M_TTYS, M_NOWAIT|M_ZERO);
-	if(tty == 0) {
-		printf("rp_attach: Could not malloc tty structures\n");
-		return;
-	}
-
-	oldspl = spltty();
-	rp_addr(unit) = rp;
-	splx(oldspl);
-
-	cdevsw_add(&rp_cdevsw);
-
-	port = 0;
-	for(aiop=0; aiop < num_aiops; aiop++) {
-		num_chan = sGetAiopNumChan(ctlp, aiop);
-		for(chan=0; chan < num_chan; chan++, port++, rp++, tty++) {
-			rp->rp_tty = tty;
-			rp->rp_port = port;
-			rp->rp_ctlp = ctlp;
-			rp->rp_unit = unit;
-			rp->rp_chan = chan;
-			rp->rp_aiop = aiop;
-
-			tty->t_line = 0;
-	/*		tty->t_termios = deftermios;
-	*/
-			rp->dtr_wait = 3 * hz;
-			rp->it_in.c_iflag = 0;
-			rp->it_in.c_oflag = 0;
-			rp->it_in.c_cflag = TTYDEF_CFLAG;
-			rp->it_in.c_lflag = 0;
-			termioschars(&rp->it_in);
-	/*		termioschars(&tty->t_termios);
-	*/
-			rp->it_in.c_ispeed = rp->it_in.c_ospeed = TTYDEF_SPEED;
-			rp->it_out = rp->it_in;
-
-			rp->rp_intmask = RXF_TRIG | TXFIFO_MT | SRC_INT |
-				DELTA_CD | DELTA_CTS | DELTA_DSR;
-			ChanStatus = sGetChanStatus(&rp->rp_channel);
-			if(sInitChan(ctlp, &rp->rp_channel, aiop, chan) == 0) {
-				printf("RocketPort sInitChan(%d, %d, %d) failed
-					\n", unit, aiop, chan);
-				return;
-			}
-			ChanStatus = sGetChanStatus(&rp->rp_channel);
-			rp->rp_cts = (ChanStatus & CTS_ACT) != 0;
-			line = (unit << 5) | (aiop << 3) | chan;
-			rp_table(line) = rp;
-		}
-	}
-}
-
-static
-int
-rpattach(dev)
-struct	isa_device	*dev;
-{
-	int	iobase, unit, /*rpmajor,*/ oldspl;
-	int	num_ports, num_chan, num_aiops;
-	int	aiop, chan, port;
-	int	ChanStatus, line, i, count;
-	unsigned int	aiopio[MAX_AIOPS_PER_BOARD];
-	struct	rp_port *rp;
-	struct	tty	*tty;
-	CONTROLLER_t	*ctlp;
-
-	iobase = dev->id_iobase;
-	unit = dev->id_unit;
-	ndevs = unit;
-
-	for(aiop=0; aiop < MAX_AIOPS_PER_BOARD; aiop++)
-		aiopio[aiop] = iobase + (aiop * 0x400);
-
-	ctlp = sCtlNumToCtlPtr(unit);
-	num_aiops = sInitController(ctlp, unit,
-				rp_controller_port + ((unit-rp_pcicount) * 0x400),
-				aiopio, MAX_AIOPS_PER_BOARD, 0,
-				FREQ_DIS, 0);
-
-	num_ports = 0;
-	for(aiop=0; aiop < num_aiops; aiop++) {
-		sResetAiopByNum(ctlp, aiop);
-		sEnAiop(ctlp, aiop);
-		num_ports += sGetAiopNumChan(ctlp, aiop);
-	}
-	printf("RocketPort%d = %d ports\n", unit, num_ports);
-	rp_num_ports[unit] = num_ports;
-
-	rp = (struct rp_port *)
-	    malloc(sizeof(struct rp_port) * num_ports, M_TTYS, M_NOWAIT|M_ZERO);
-	if(rp == 0) {
-		printf("rp_attach: Could not malloc rp_ports structures\n");
-		return(0);
-	}
-
-	count = unit * 32;    /* board # times max ports per card  SG */
-	for(i=count;i < (count + rp_num_ports[unit]);i++)
-		minor_to_unit[i] = unit;
-
-	tty = (struct tty *)
-	    malloc(sizeof(struct tty) * num_ports, M_TTYS, M_NOWAIT|M_ZERO);
-	if(tty == 0) {
-		printf("rp_attach: Could not malloc tty structures\n");
-		return(0);
-	}
-
-	oldspl = spltty();
-	rp_addr(unit) = rp;
-	splx(oldspl);
-
-	cdevsw_add(&rp_cdevsw);
-
-	port = 0;
-	for(aiop=0; aiop < num_aiops; aiop++) {
-		num_chan = sGetAiopNumChan(ctlp, aiop);
-		for(chan=0; chan < num_chan; chan++, port++, rp++, tty++) {
-			rp->rp_tty = tty;
-			rp->rp_port = port;
-			rp->rp_ctlp = ctlp;
-			rp->rp_unit = unit;
-			rp->rp_chan = chan;
-			rp->rp_aiop = aiop;
-
-			tty->t_line = 0;
-	/*		tty->t_termios = deftermios;
-	*/
-			rp->dtr_wait = 3 * hz;
-			rp->it_in.c_iflag = 0;
-			rp->it_in.c_oflag = 0;
-			rp->it_in.c_cflag = TTYDEF_CFLAG;
-			rp->it_in.c_lflag = 0;
-			termioschars(&rp->it_in);
-	/*		termioschars(&tty->t_termios);
-	*/
-			rp->it_in.c_ispeed = rp->it_in.c_ospeed = TTYDEF_SPEED;
-			rp->it_out = rp->it_in;
-
-			rp->rp_intmask = RXF_TRIG | TXFIFO_MT | SRC_INT |
-				DELTA_CD | DELTA_CTS | DELTA_DSR;
-			ChanStatus = sGetChanStatus(&rp->rp_channel);
-			if(sInitChan(ctlp, &rp->rp_channel, aiop, chan) == 0) {
-				printf("RocketPort sInitChan(%d, %d, %d) failed
-					\n", unit, aiop, chan);
-				return(0);
-			}
-			ChanStatus = sGetChanStatus(&rp->rp_channel);
-			rp->rp_cts = (ChanStatus & CTS_ACT) != 0;
-			line = (unit << 5) | (aiop << 3) | chan;
-			rp_table(line) = rp;
-		}
-	}
-
-	return(1);
-}
-
-int
-rpopen(dev, flag, mode, p)
-	dev_t	dev;
-	int	flag, mode;
-	struct	proc	*p;
-{
-	struct	rp_port *rp;
-	int	unit, port, mynor, umynor, flags;  /* SG */
-	struct	tty	*tp;
-	int	oldspl, error;
-	unsigned int	IntMask, ChanStatus;
-
-
-   umynor = (((minor(dev) >> 16) -1) * 32);    /* SG */
-	port  = (minor(dev) & 0x1f);                /* SG */
-	mynor = (port + umynor);                    /* SG */
-	unit = minor_to_unit[mynor];
-	if (rp_addr(unit) == NULL)
-		return (ENXIO);
-	if(IS_CONTROL(dev))
-		return(0);
-	rp = rp_addr(unit) + port;
-/*	rp->rp_tty = &rp_tty[rp->rp_port];
-*/
-	tp = rp->rp_tty;
-	dev->si_tty = tp;
-
-	oldspl = spltty();
-
-open_top:
-	while(rp->state & ~SET_DTR) {
-		error = tsleep(&rp->dtr_wait, TTIPRI | PCATCH, "rpdtr", 0);
-		if(error != 0)
-			goto out;
-	}
-
-	if(tp->t_state & TS_ISOPEN) {
-		if(IS_CALLOUT(dev)) {
-			if(!rp->active_out) {
-				error = EBUSY;
-				goto out;
-			}
-		} else {
-			if(rp->active_out) {
-				if(flag & O_NONBLOCK) {
-					error = EBUSY;
-					goto out;
-				}
-				error = tsleep(&rp->active_out,
-					TTIPRI | PCATCH, "rpbi", 0);
-				if(error != 0)
-					goto out;
-				goto open_top;
-			}
-		}
-		if(tp->t_state & TS_XCLUDE &&
-		    suser(p)) {
-			splx(oldspl);
-			return(EBUSY);
-		}
-	}
-	else {
-		tp->t_dev = dev;
-		tp->t_param = rpparam;
-		tp->t_oproc = rpstart;
-		tp->t_stop = rpstop;
-		tp->t_line = 0;
-		tp->t_termios = IS_CALLOUT(dev) ? rp->it_out : rp->it_in;
-		flags = 0;
-		flags |= SET_RTS;
-		flags |= SET_DTR;
-		rp->rp_channel.TxControl[3] =
-			((rp->rp_channel.TxControl[3]
-			& ~(SET_RTS | SET_DTR)) | flags);
-		sOutDW(rp->rp_channel.IndexAddr,
-			*(DWord_t *) &(rp->rp_channel.TxControl[0]));
-		sSetRxTrigger(&rp->rp_channel, TRIG_1);
-		sDisRxStatusMode(&rp->rp_channel);
-		sFlushRxFIFO(&rp->rp_channel);
-		sFlushTxFIFO(&rp->rp_channel);
-
-		sEnInterrupts(&rp->rp_channel,
-			(TXINT_EN|MCINT_EN|RXINT_EN|SRCINT_EN|CHANINT_EN));
-		sSetRxTrigger(&rp->rp_channel, TRIG_1);
-
-		sDisRxStatusMode(&rp->rp_channel);
-		sClrTxXOFF(&rp->rp_channel);
-
-/*		sDisRTSFlowCtl(&rp->rp_channel);
-		sDisCTSFlowCtl(&rp->rp_channel);
-*/
-		sDisTxSoftFlowCtl(&rp->rp_channel);
-
-		sStartRxProcessor(&rp->rp_channel);
-
-		sEnRxFIFO(&rp->rp_channel);
-		sEnTransmit(&rp->rp_channel);
-
-/*		sSetDTR(&rp->rp_channel);
-		sSetRTS(&rp->rp_channel);
-*/
-
-		++rp->wopeners;
-		error = rpparam(tp, &tp->t_termios);
-		--rp->wopeners;
-		if(error != 0) {
-			splx(oldspl);
-			return(error);
-		}
-
-		rp_num_ports_open++;
-
-		IntMask = sGetChanIntID(&rp->rp_channel);
-		IntMask = IntMask & rp->rp_intmask;
-		ChanStatus = sGetChanStatus(&rp->rp_channel);
-		if((IntMask & DELTA_CD) || IS_CALLOUT(dev)) {
-			if((ChanStatus & CD_ACT) || IS_CALLOUT(dev)) {
-					(void)(*linesw[tp->t_line].l_modem)(tp, 1);
-			}
-		}
-
-	if(rp_num_ports_open == 1)
-		timeout(rp_do_poll, (void *)NULL, POLL_INTERVAL);
-
-	}
-
-	if(!(flag&O_NONBLOCK) && !(tp->t_cflag&CLOCAL) &&
-		!(tp->t_state & TS_CARR_ON) && !(IS_CALLOUT(dev))) {
-		++rp->wopeners;
-		error = tsleep(TSA_CARR_ON(tp), TTIPRI | PCATCH,
-				"rpdcd", 0);
-		--rp->wopeners;
-		if(error != 0)
-			goto out;
-		goto open_top;
-	}
-	error = (*linesw[tp->t_line].l_open)(dev, tp);
-
-	rp_disc_optim(tp, &tp->t_termios, rp);
-	if(tp->t_state & TS_ISOPEN && IS_CALLOUT(dev))
-		rp->active_out = TRUE;
-
-/*	if(rp_num_ports_open == 1)
-		timeout(rp_do_poll, (void *)NULL, POLL_INTERVAL);
-*/
-out:
-	splx(oldspl);
-	if(!(tp->t_state & TS_ISOPEN) && rp->wopeners == 0) {
-		rphardclose(rp);
-	}
-	return(error);
-}
-
-int
-rpclose(dev, flag, mode, p)
-	dev_t	dev;
-	int	flag, mode;
-	struct	proc	*p;
-{
-	int	oldspl, unit, mynor, umynor, port; /* SG */
-	struct	rp_port *rp;
-	struct	tty	*tp;
-	CHANNEL_t	*cp;
-
-   umynor = (((minor(dev) >> 16) -1) * 32);    /* SG */
-	port  = (minor(dev) & 0x1f);                /* SG */
-	mynor = (port + umynor);                    /* SG */
-   unit = minor_to_unit[mynor];                /* SG */
-
-	if(IS_CONTROL(dev))
-		return(0);
-	rp = rp_addr(unit) + port;
-	cp = &rp->rp_channel;
-	tp = rp->rp_tty;
-
-	oldspl = spltty();
-	(*linesw[tp->t_line].l_close)(tp, flag);
-	rp_disc_optim(tp, &tp->t_termios, rp);
-	rpstop(tp, FREAD | FWRITE);
-	rphardclose(rp);
-
-	tp->t_state &= ~TS_BUSY;
-	ttyclose(tp);
-
-	splx(oldspl);
-
-	return(0);
-}
-
-static void
-rphardclose(struct rp_port *rp)
-{
-	int	mynor;
-	struct	tty	*tp;
-	CHANNEL_t	*cp;
-
-	cp = &rp->rp_channel;
-	tp = rp->rp_tty;
-	mynor = MINOR_MAGIC(tp->t_dev);
-
-	sFlushRxFIFO(cp);
-	sFlushTxFIFO(cp);
-	sDisTransmit(cp);
-	sDisInterrupts(cp, TXINT_EN|MCINT_EN|RXINT_EN|SRCINT_EN|CHANINT_EN);
-	sDisRTSFlowCtl(cp);
-	sDisCTSFlowCtl(cp);
-	sDisTxSoftFlowCtl(cp);
-	sClrTxXOFF(cp);
-
-	if(tp->t_cflag&HUPCL || !(tp->t_state&TS_ISOPEN) || !rp->active_out) {
-		sClrDTR(cp);
-	}
-	if(IS_CALLOUT(tp->t_dev)) {
-		sClrDTR(cp);
-	}
-	if(rp->dtr_wait != 0) {
-		timeout(rpdtrwakeup, rp, rp->dtr_wait);
-		rp->state |= ~SET_DTR;
-	}
-
-	rp->active_out = FALSE;
-	wakeup(&rp->active_out);
-	wakeup(TSA_CARR_ON(tp));
-}
-
-static
-int
-rpwrite(dev, uio, flag)
-	dev_t	dev;
-	struct	uio	*uio;
-	int	flag;
-{
-	struct	rp_port *rp;
-	struct	tty	*tp;
-	int	unit, mynor, port, umynor, error = 0; /* SG */
-
-   umynor = (((minor(dev) >> 16) -1) * 32);    /* SG */
-	port  = (minor(dev) & 0x1f);                /* SG */
-	mynor = (port + umynor);                    /* SG */
-   unit = minor_to_unit[mynor];                /* SG */
-
-	if(IS_CONTROL(dev))
-		return(ENODEV);
-	rp = rp_addr(unit) + port;
-	tp = rp->rp_tty;
-	while(rp->rp_disable_writes) {
-		rp->rp_waiting = 1;
-		error = ttysleep(tp, (caddr_t)rp, TTOPRI|PCATCH, "rp_write", 0);
-		if (error)
-			return(error);
-	}
-
-	error = (*linesw[tp->t_line].l_write)(tp, uio, flag);
-	return error;
-}
-
-static void
-rpdtrwakeup(void *chan)
-{
-	struct	rp_port *rp;
-
-	rp = (struct rp_port *)chan;
-	rp->state &= SET_DTR;
-	wakeup(&rp->dtr_wait);
-}
-
-int
-rpioctl(dev, cmd, data, flag, p)
-	dev_t	dev;
-	u_long	cmd;
-	caddr_t data;
-	int	flag;
-	struct	proc	*p;
-{
-	struct rp_port	*rp;
-	CHANNEL_t	*cp;
-	struct tty	*tp;
-	int	unit, mynor, port, umynor;            /* SG */
-	int	oldspl;
-	int	error = 0;
-	int	arg, flags, result, ChanStatus;
-	int	oldcmd;
-	struct	termios term, *t;
-
-   umynor = (((minor(dev) >> 16) -1) * 32);    /* SG */
-	port  = (minor(dev) & 0x1f);                /* SG */
-	mynor = (port + umynor);                    /* SG */
-	unit = minor_to_unit[mynor];
-	rp = rp_addr(unit) + port;
-
-	if(IS_CONTROL(dev)) {
-		struct	termios *ct;
-
-		switch (IS_CONTROL(dev)) {
-		case CONTROL_INIT_STATE:
-			ct =  IS_CALLOUT(dev) ? &rp->it_out : &rp->it_in;
-			break;
-		case CONTROL_LOCK_STATE:
-			ct =  IS_CALLOUT(dev) ? &rp->lt_out : &rp->lt_in;
-			break;
-		default:
-			return(ENODEV); 	/* /dev/nodev */
-		}
-		switch (cmd) {
-		case TIOCSETA:
-			error = suser(p);
-			if(error != 0)
-				return(error);
-			*ct = *(struct termios *)data;
-			return(0);
-		case TIOCGETA:
-			*(struct termios *)data = *ct;
-			return(0);
-		case TIOCGETD:
-			*(int *)data = TTYDISC;
-			return(0);
-		case TIOCGWINSZ:
-			bzero(data, sizeof(struct winsize));
-			return(0);
-		default:
-			return(ENOTTY);
-		}
-	}
-
-	tp = rp->rp_tty;
-	cp = &rp->rp_channel;
-
-#if defined(COMPAT_43) || defined(COMPAT_SUNOS)
-	term = tp->t_termios;
-	oldcmd = cmd;
-	error = ttsetcompat(tp, &cmd, data, &term);
-	if(error != 0)
-		return(error);
-	if(cmd != oldcmd) {
-		data = (caddr_t)&term;
-	}
-#endif
-	if((cmd == TIOCSETA) || (cmd == TIOCSETAW) || (cmd == TIOCSETAF)) {
-		int	cc;
-		struct	termios *dt = (struct termios *)data;
-		struct	termios *lt = IS_CALLOUT(dev)
-					? &rp->lt_out : &rp->lt_in;
-
-		dt->c_iflag = (tp->t_iflag & lt->c_iflag)
-				| (dt->c_iflag & ~lt->c_iflag);
-		dt->c_oflag = (tp->t_oflag & lt->c_oflag)
-				| (dt->c_oflag & ~lt->c_oflag);
-		dt->c_cflag = (tp->t_cflag & lt->c_cflag)
-				| (dt->c_cflag & ~lt->c_cflag);
-		dt->c_lflag = (tp->t_lflag & lt->c_lflag)
-				| (dt->c_lflag & ~lt->c_lflag);
-		for(cc = 0; cc < NCCS; ++cc)
-			if(lt->c_cc[cc] != 0)
-				dt->c_cc[cc] = tp->t_cc[cc];
-		if(lt->c_ispeed != 0)
-			dt->c_ispeed = tp->t_ispeed;
-		if(lt->c_ospeed != 0)
-			dt->c_ospeed = tp->t_ospeed;
-	}
-
-	t = &tp->t_termios;
-
-	error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p);
-	if(error != ENOIOCTL) {
-		return(error);
-	}
-	oldspl = spltty();
-
-	flags = rp->rp_channel.TxControl[3];
-
-	error = ttioctl(tp, cmd, data, flag);
-	flags = rp->rp_channel.TxControl[3];
-	rp_disc_optim(tp, &tp->t_termios, rp);
-	if(error != ENOIOCTL) {
-		splx(oldspl);
-		return(error);
-	}
-	switch(cmd) {
-	case TIOCSBRK:
-		sSendBreak(&rp->rp_channel);
-		break;
-
-	case TIOCCBRK:
-		sClrBreak(&rp->rp_channel);
-		break;
-
-	case TIOCSDTR:
-		sSetDTR(&rp->rp_channel);
-		sSetRTS(&rp->rp_channel);
-		break;
-
-	case TIOCCDTR:
-		sClrDTR(&rp->rp_channel);
-		break;
-
-	case TIOCMSET:
-		arg = *(int *) data;
-		flags = 0;
-		if(arg & TIOCM_RTS)
-			flags |= SET_RTS;
-		if(arg & TIOCM_DTR)
-			flags |= SET_DTR;
-		rp->rp_channel.TxControl[3] =
-			((rp->rp_channel.TxControl[3]
-			& ~(SET_RTS | SET_DTR)) | flags);
-		sOutDW(rp->rp_channel.IndexAddr,
-			*(DWord_t *) &(rp->rp_channel.TxControl[0]));
-		break;
-	case TIOCMBIS:
-		arg = *(int *) data;
-		flags = 0;
-		if(arg & TIOCM_RTS)
-			flags |= SET_RTS;
-		if(arg & TIOCM_DTR)
-			flags |= SET_DTR;
-			rp->rp_channel.TxControl[3] |= flags;
-		sOutDW(rp->rp_channel.IndexAddr,
-			*(DWord_t *) &(rp->rp_channel.TxControl[0]));
-		break;
-	case TIOCMBIC:
-		arg = *(int *) data;
-		flags = 0;
-		if(arg & TIOCM_RTS)
-			flags |= SET_RTS;
-		if(arg & TIOCM_DTR)
-			flags |= SET_DTR;
-		rp->rp_channel.TxControl[3] &= ~flags;
-		sOutDW(rp->rp_channel.IndexAddr,
-			*(DWord_t *) &(rp->rp_channel.TxControl[0]));
-		break;
-
-
-	case TIOCMGET:
-		ChanStatus = sGetChanStatusLo(&rp->rp_channel);
-		flags = rp->rp_channel.TxControl[3];
-		result = TIOCM_LE; /* always on while open for some reason */
-		result |= (((flags & SET_DTR) ? TIOCM_DTR : 0)
-			| ((flags & SET_RTS) ? TIOCM_RTS : 0)
-			| ((ChanStatus & CD_ACT) ? TIOCM_CAR : 0)
-			| ((ChanStatus & DSR_ACT) ? TIOCM_DSR : 0)
-			| ((ChanStatus & CTS_ACT) ? TIOCM_CTS : 0));
-
-		if(rp->rp_channel.RxControl[2] & RTSFC_EN)
-		{
-			result |= TIOCM_RTS;
-		}
-
-		*(int *)data = result;
-		break;
-	case TIOCMSDTRWAIT:
-		error = suser(p);
-		if(error != 0) {
-			splx(oldspl);
-			return(error);
-		}
-		rp->dtr_wait = *(int *)data * hz/100;
-		break;
-	case TIOCMGDTRWAIT:
-		*(int *)data = rp->dtr_wait * 100/hz;
-		break;
-	default:
-		splx(oldspl);
-		return ENOTTY;
-	}
-	splx(oldspl);
-	return(0);
-}
-
-static struct speedtab baud_table[] = {
-	{B0,	0},		{B50,	BRD50},		{B75,	BRD75},
-	{B110,	BRD110}, 	{B134,	BRD134}, 	{B150,	BRD150},
-	{B200,	BRD200}, 	{B300,	BRD300}, 	{B600,	BRD600},
-	{B1200,	BRD1200},	{B1800,	BRD1800},	{B2400,	BRD2400},
-	{B4800,	BRD4800},	{B9600,	BRD9600},	{B19200, BRD19200},
-	{B38400, BRD38400},	{B7200,	BRD7200},	{B14400, BRD14400},
-				{B57600, BRD57600},	{B76800, BRD76800},
-	{B115200, BRD115200},	{B230400, BRD230400},
-	-1,	-1
-};
-
-static int
-rpparam(tp, t)
-	struct tty *tp;
-	struct termios *t;
-{
-	struct rp_port	*rp;
-	CHANNEL_t	*cp;
-	int	unit, mynor, port, umynor;               /* SG */
-	int	oldspl, cflag, iflag, oflag, lflag;
-	int	ospeed;
-
-
-   umynor = (((minor(tp->t_dev) >> 16) -1) * 32);    /* SG */
-	port  = (minor(tp->t_dev) & 0x1f);                /* SG */
-	mynor = (port + umynor);                          /* SG */
-
-	unit = minor_to_unit[mynor];
-	rp = rp_addr(unit) + port;
-	cp = &rp->rp_channel;
-	oldspl = spltty();
-
-	cflag = t->c_cflag;
-	iflag = t->c_iflag;
-	oflag = t->c_oflag;
-	lflag = t->c_lflag;
-
-	ospeed = ttspeedtab(t->c_ispeed, baud_table);
-	if(ospeed < 0 || t->c_ispeed != t->c_ospeed)
-		return(EINVAL);
-
-	tp->t_ispeed = t->c_ispeed;
-	tp->t_ospeed = t->c_ospeed;
-	tp->t_cflag = cflag;
-	tp->t_iflag = iflag;
-	tp->t_oflag = oflag;
-	tp->t_lflag = lflag;
-
-	if(t->c_ospeed == 0) {
-		sClrDTR(cp);
-		return(0);
-	}
-	rp->rp_fifo_lw = ((t->c_ospeed*2) / 1000) +1;
-
-	/* Set baud rate ----- we only pay attention to ispeed */
-	sSetDTR(cp);
-	sSetRTS(cp);
-	sSetBaud(cp, ospeed);
-
-	if(cflag & CSTOPB) {
-		sSetStop2(cp);
-	} else {
-		sSetStop1(cp);
-	}
-
-	if(cflag & PARENB) {
-		sEnParity(cp);
-		if(cflag & PARODD) {
-			sSetOddParity(cp);
-		} else {
-			sSetEvenParity(cp);
-		}
-	}
-	else {
-		sDisParity(cp);
-	}
-	if((cflag & CSIZE) == CS8) {
-		sSetData8(cp);
-		rp->rp_imask = 0xFF;
-	} else {
-		sSetData7(cp);
-		rp->rp_imask = 0x7F;
-	}
-
-	if(iflag & ISTRIP) {
-		rp->rp_imask &= 0x7F;
-	}
-
-	if(cflag & CLOCAL) {
-		rp->rp_intmask &= ~DELTA_CD;
-	} else {
-		rp->rp_intmask |= DELTA_CD;
-	}
-
-	/* Put flow control stuff here */
-
-	if(cflag & CCTS_OFLOW) {
-		sEnCTSFlowCtl(cp);
-	} else {
-		sDisCTSFlowCtl(cp);
-	}
-
-	if(cflag & CRTS_IFLOW) {
-		rp->rp_rts_iflow = 1;
-	} else {
-		rp->rp_rts_iflow = 0;
-	}
-
-	if(cflag & CRTS_IFLOW) {
-		sEnRTSFlowCtl(cp);
-	} else {
-		sDisRTSFlowCtl(cp);
-	}
-	rp_disc_optim(tp, t, rp);
-
-	if((cflag & CLOCAL) || (sGetChanStatusLo(cp) & CD_ACT)) {
-		tp->t_state |= TS_CARR_ON;
-		wakeup(TSA_CARR_ON(tp));
-	}
-
-/*	tp->t_state |= TS_CAN_BYPASS_L_RINT;
-	flags = rp->rp_channel.TxControl[3];
-	if(flags & SET_DTR)
-	else
-	if(flags & SET_RTS)
-	else
-*/
-	splx(oldspl);
-
-	return(0);
-}
-
-static void
-rp_disc_optim(tp, t, rp)
-struct	tty	*tp;
-struct	termios *t;
-struct	rp_port *rp;
-{
-	if(!(t->c_iflag & (ICRNL | IGNCR | IMAXBEL | INLCR | ISTRIP | IXON))
-		&&(!(t->c_iflag & BRKINT) || (t->c_iflag & IGNBRK))
-		&&(!(t->c_iflag & PARMRK)
-		  ||(t->c_iflag & (IGNPAR | IGNBRK)) == (IGNPAR | IGNBRK))
-		&& !(t->c_lflag & (ECHO | ICANON | IEXTEN | ISIG | PENDIN))
-		&& linesw[tp->t_line].l_rint == ttyinput)
-		tp->t_state |= TS_CAN_BYPASS_L_RINT;
-	else
-		tp->t_state &= ~TS_CAN_BYPASS_L_RINT;
-}
-
-static void
-rpstart(tp)
-	struct tty *tp;
-{
-	struct rp_port	*rp;
-	CHANNEL_t	*cp;
-	struct	clist	*qp;
-	int	unit, mynor, port, umynor;               /* SG */
-	char	ch, flags;
-	int	spl, xmit_fifo_room;
-	int	count;
-
-
-   umynor = (((minor(tp->t_dev) >> 16) -1) * 32);    /* SG */
-	port  = (minor(tp->t_dev) & 0x1f);                /* SG */
-	mynor = (port + umynor);                          /* SG */
-	unit = minor_to_unit[mynor];
-	rp = rp_addr(unit) + port;
-	cp = &rp->rp_channel;
-	flags = rp->rp_channel.TxControl[3];
-	spl = spltty();
-
-	if(tp->t_state & (TS_TIMEOUT | TS_TTSTOP)) {
-		ttwwakeup(tp);
-		splx(spl);
-		return;
-	}
-	if(rp->rp_xmit_stopped) {
-		sEnTransmit(cp);
-		rp->rp_xmit_stopped = 0;
-	}
-	count = sGetTxCnt(cp);
-
-	if(tp->t_outq.c_cc == 0) {
-		if((tp->t_state & TS_BUSY) && (count == 0)) {
-			tp->t_state &= ~TS_BUSY;
-		}
-		ttwwakeup(tp);
-		splx(spl);
-		return;
-	}
-	xmit_fifo_room = TXFIFO_SIZE - sGetTxCnt(cp);
-	qp = &tp->t_outq;
-	count = 0;
-	if(xmit_fifo_room > 0 && qp->c_cc > 0) {
-		tp->t_state |= TS_BUSY;
-	}
-	while(xmit_fifo_room > 0 && qp->c_cc > 0) {
-		ch = getc(qp);
-		sOutB(sGetTxRxDataIO(cp), ch);
-		xmit_fifo_room--;
-		count++;
-	}
-	rp->rp_restart = (qp->c_cc > 0) ? rp->rp_fifo_lw : 0;
-
-	ttwwakeup(tp);
-	splx(spl);
-}
-
-static
-void
-rpstop(tp, flag)
-	register struct tty *tp;
-	int	flag;
-{
-	struct rp_port	*rp;
-	CHANNEL_t	*cp;
-	int	unit, mynor, port, umynor;                  /* SG */
-	int	spl;
-
-   umynor = (((minor(tp->t_dev) >> 16) -1) * 32);    /* SG */
-	port  = (minor(tp->t_dev) & 0x1f);                /* SG */
-	mynor = (port + umynor);                          /* SG */
-	unit = minor_to_unit[mynor];
-	rp = rp_addr(unit) + port;
-	cp = &rp->rp_channel;
-
-	spl = spltty();
-
-	if(tp->t_state & TS_BUSY) {
-		if((tp->t_state&TS_TTSTOP) == 0) {
-			sFlushTxFIFO(cp);
-		} else {
-			if(rp->rp_xmit_stopped == 0) {
-				sDisTransmit(cp);
-				rp->rp_xmit_stopped = 1;
-			}
-		}
-	}
-	splx(spl);
-	rpstart(tp);
-}