update to isdn4bsd beta release 0.90

drivers which are likely to be ported to newbus are commented out for now

7 files changed, 142 insertions, 123 deletions

diff --git a/sys/conf/NOTES b/sys/conf/NOTES
index c98937f..afcfd8b 100644
--- a/sys/conf/NOTES
+++ b/sys/conf/NOTES
@@ -1951,13 +1951,17 @@ controller	pcf0	at isa? port 0x320 irq 5
 
 # ISDN4BSD section
 #
-# see /usr/share/examples/isdn/ROADMAP for an introduction to isdn4bsd.
+# See /usr/share/examples/isdn/ROADMAP for an introduction to isdn4bsd.
 #
 # i4b passive ISDN cards support (isic - I4b Siemens Isdn Chipset driver)
 # note that the ``options'' and ``device'' lines must BOTH be defined !
 #
-# Non-PnP Cards:
-# --------------
+# Driver entries marked "(not supported yet!)" are not working currently
+# due to not being converted to newbus. We hope to get them back to support
+# in the near future.
+#
+# ISA bus non-PnP Cards:
+# ----------------------
 #
 # Teles S0/8 or Niccy 1008
 options 	TEL_S0_8
@@ -1975,61 +1979,61 @@ options 	TEL_S0_16_3
 options 	AVM_A1
 #device		isic0	at isa? port 0x340 irq 5 flags 4
 #
-# USRobotics Sportster ISDN TA intern
-options 	USR_STI
+# USRobotics Sportster ISDN TA intern (not supported yet!)
+#options 	USR_STI
 #device		isic0	at isa? port 0x268 irq 5 flags 7
 #
-# ITK ix1 Micro ( < V.3, non-PnP version )
-options 	ITKIX1
+# ITK ix1 Micro ( < V.3, non-PnP version ) (not supported yet!)
+#options 	ITKIX1
 #device		isic0	at isa? port 0x398 irq 10 flags 18
 #
 # ELSA PCC-16
 options 	"ELSA_PCC16"
-#device		isic0	at isa? port 0x360 irq 10 flags 19
+#device		isic0	at isa? port 0x360 irq 10 flags 20
 #
-# PnP-Cards:
-# ----------
+# ISA bus PnP Cards:
+# ------------------
 #
 # Teles S0/16.3 PnP
 options 	TEL_S0_16_3_P
-#device		isic0	at isa? port ? irq ?
+#device		isic0
 #
 # Creatix ISDN-S0 P&P
 options 	CRTX_S0_P
-#device		isic0	at isa? port ? irq ?
+#device		isic0
 #
 # Dr. Neuhaus Niccy Go@
 options 	DRN_NGO
-#device		isic0	at isa? port ? irq ?
+#device		isic0
 #
 # Sedlbauer Win Speed
 options 	SEDLBAUER
-#device		isic0	at isa? port ? irq ?
+#device		isic0
 #
-# Dynalink IS64PH
-options 	DYNALINK
-#device		isic0	at isa? port ? irq ?
+# Dynalink IS64PH (not supported yet!)
+#options 	DYNALINK 
+#device		isic0
 #
 # ELSA QuickStep 1000pro ISA
 options 	ELSA_QS1ISA
-#device		isic0	at isa? port ? irq ?
+#device		isic0
 #
-# ITK ix1 Micro ( V.3, PnP version )
-options 	"ITKIX1"
-#device		isic0	at isa? port ? irq ?
+# ITK ix1 Micro ( V.3, PnP version ) (not supported yet!)
+#options 	"ITKIX1"
+#device		isic0
 #
-# AVM Fritz!Card PnP
-options 	"AVM_PNP"
-#device 		isic0	at isa? port ? irq ?
+# AVM Fritz!Card PnP (not supported yet!)
+#options 	"AVM_PNP"
+#device 	isic0
 #
 # Siemens I-Surf 2.0
 options 	"SIEMENS_ISURF2"
-#device		isic0	at isa? port ? irq ?
+#device		isic0
 #
-# PCI-Cards:
-# ----------
+# PCI bus Cards:
+# --------------
 #
-# ELSA QuickStep 1000pro PCI
+# ELSA MicroLink ISDN/PCI (same as ELSA QuickStep 1000pro PCI)
 options 	ELSA_QS1PCI
 #device		isic0
 #
@@ -2037,17 +2041,18 @@ options 	ELSA_QS1PCI
 options 	"AVM_A1_PCI"
 #device		isic0
 #
-# PCMCIA-Cards:
+# PCMCIA Cards:
 # -------------
 #
-# AVM PCMCIA Fritz!Card
-options 	AVM_A1_PCMCIA
-device		isic0	at isa? port 0x340 irq 5 flags 10
+# AVM PCMCIA Fritz!Card (not supported yet!)
+#options 	AVM_A1_PCMCIA
+#device		isic0	at isa? port 0x340 irq 5 flags 10
 #
 # Active Cards:
 # -------------
 #
-# Stollmann Tina-dd control device
+# Stollmann Tina-dd control device 
+# (driver under development, not fully functional!)
 device		tina0	at isa? port 0x260 irq 10
 #
 # ISDN Protocol Stack
@@ -2081,6 +2086,8 @@ pseudo-device	"i4btel"	2
 pseudo-device	"i4bipr"	4
 # enable VJ header compression detection for ipr i/f
 options 	IPR_VJ
+# enable logging of the first n IP packets to isdnd (n=32 here)
+#options	IPR_LOG=32
 #
 # network driver for sync PPP over ISDN
 pseudo-device	"i4bisppp"	4
diff --git a/sys/conf/files.i386 b/sys/conf/files.i386
index 4af0f61..a7433e3 100644
--- a/sys/conf/files.i386
+++ b/sys/conf/files.i386
@@ -375,22 +375,21 @@ i386/svr4/svr4_machdep.c	optional	compat_svr4
 i4b/layer1/i4b_asuscom_ipac.c	optional	isic
 i4b/layer1/i4b_avm_a1.c		optional	isic
 i4b/layer1/i4b_avm_fritz_pci.c	optional	isic
-i4b/layer1/i4b_avm_fritz_pcmcia.c optional	isic
-i4b/layer1/i4b_avm_fritz_pnp.c	optional	isic
+#i4b/layer1/i4b_avm_fritz_pcmcia.c optional	isic
+#i4b/layer1/i4b_avm_fritz_pnp.c	optional	isic
 i4b/layer1/i4b_bchan.c		optional	isic
 i4b/layer1/i4b_ctx_s0P.c	optional	isic
 i4b/layer1/i4b_drn_ngo.c	optional	isic
-i4b/layer1/i4b_dynalink.c	optional	isic
+#i4b/layer1/i4b_dynalink.c	optional	isic
 i4b/layer1/i4b_elsa_qs1i.c	optional	isic
 i4b/layer1/i4b_elsa_qs1p.c	optional	isic
 i4b/layer1/i4b_hscx.c		optional	isic
 i4b/layer1/i4b_isac.c		optional	isic
 i4b/layer1/i4b_isic.c		optional	isic
 i4b/layer1/i4b_isic_isa.c	optional	isic
-i4b/layer1/i4b_isic_pci.c	optional	isic
-i4b/layer1/i4b_isic_pcmcia.c	optional	isic
+#i4b/layer1/i4b_isic_pcmcia.c	optional	isic
 i4b/layer1/i4b_isic_pnp.c	optional	isic
-i4b/layer1/i4b_itk_ix1.c	optional	isic
+#i4b/layer1/i4b_itk_ix1.c	optional	isic
 i4b/layer1/i4b_l1.c		optional	isic
 i4b/layer1/i4b_l1fsm.c		optional	isic
 i4b/layer1/i4b_siemens_isurf.c	optional	isic
@@ -398,8 +397,7 @@ i4b/layer1/i4b_sws.c		optional	isic
 i4b/layer1/i4b_tel_s016.c	optional	isic
 i4b/layer1/i4b_tel_s0163.c	optional	isic
 i4b/layer1/i4b_tel_s08.c	optional	isic
-i4b/layer1/i4b_tel_s0P.c	optional	isic
-i4b/layer1/i4b_usr_sti.c	optional	isic
+#i4b/layer1/i4b_usr_sti.c	optional	isic
 isa/atkbd_isa.c			optional	atkbd
 isa/atkbdc_isa.c		optional	atkbdc
 isa/psm.c			optional	psm
diff --git a/sys/conf/options.i386 b/sys/conf/options.i386
index 376f048..fe38c4e 100644
--- a/sys/conf/options.i386
+++ b/sys/conf/options.i386
@@ -149,7 +149,7 @@ TEL_S0_16		opt_i4b.h
 TEL_S0_16_3		opt_i4b.h
 AVM_A1			opt_i4b.h
 USR_STI			opt_i4b.h
-ITKIX1			opt_i4b.h
+#ITKIX1			opt_i4b.h
 ELSA_PCC16		opt_i4b.h
 # -------------------------------
 # isdn4bsd: passive ISA PnP cards
@@ -158,10 +158,10 @@ CRTX_S0_P		opt_i4b.h
 DRN_NGO                 opt_i4b.h
 TEL_S0_16_3_P		opt_i4b.h
 SEDLBAUER		opt_i4b.h
-DYNALINK		opt_i4b.h
+#DYNALINK		opt_i4b.h
 ASUSCOM_IPAC		opt_i4b.h
 ELSA_QS1ISA		opt_i4b.h
-AVM_PNP			opt_i4b.h
+#AVM_PNP		opt_i4b.h
 SIEMENS_ISURF2		opt_i4b.h
 # -------------------------------
 # isdn4bsd: passive PCI cards
@@ -171,7 +171,7 @@ AVM_A1_PCI		opt_i4b.h
 # -------------------------------
 # isdn4bsd: passive PCMCIA cards
 # -------------------------------
-AVM_A1_PCMCIA		opt_i4b.h
+#AVM_A1_PCMCIA		opt_i4b.h
 # -------------------------------
 # isdn4bsd: misc options
 # -------------------------------
@@ -179,6 +179,7 @@ AVM_A1_PCMCIA		opt_i4b.h
 I4B_SMP_WORKAROUND      opt_i4b.h
 # enable VJ compression code for ipr i/f
 IPR_VJ			opt_i4b.h
+IPR_LOG			opt_i4b.h
 
 # -------------------------------
 # oltr: build options
diff --git a/sys/i386/conf/LINT b/sys/i386/conf/LINT
index c98937f..afcfd8b 100644
--- a/sys/i386/conf/LINT
+++ b/sys/i386/conf/LINT
@@ -1951,13 +1951,17 @@ controller	pcf0	at isa? port 0x320 irq 5
 
 # ISDN4BSD section
 #
-# see /usr/share/examples/isdn/ROADMAP for an introduction to isdn4bsd.
+# See /usr/share/examples/isdn/ROADMAP for an introduction to isdn4bsd.
 #
 # i4b passive ISDN cards support (isic - I4b Siemens Isdn Chipset driver)
 # note that the ``options'' and ``device'' lines must BOTH be defined !
 #
-# Non-PnP Cards:
-# --------------
+# Driver entries marked "(not supported yet!)" are not working currently
+# due to not being converted to newbus. We hope to get them back to support
+# in the near future.
+#
+# ISA bus non-PnP Cards:
+# ----------------------
 #
 # Teles S0/8 or Niccy 1008
 options 	TEL_S0_8
@@ -1975,61 +1979,61 @@ options 	TEL_S0_16_3
 options 	AVM_A1
 #device		isic0	at isa? port 0x340 irq 5 flags 4
 #
-# USRobotics Sportster ISDN TA intern
-options 	USR_STI
+# USRobotics Sportster ISDN TA intern (not supported yet!)
+#options 	USR_STI
 #device		isic0	at isa? port 0x268 irq 5 flags 7
 #
-# ITK ix1 Micro ( < V.3, non-PnP version )
-options 	ITKIX1
+# ITK ix1 Micro ( < V.3, non-PnP version ) (not supported yet!)
+#options 	ITKIX1
 #device		isic0	at isa? port 0x398 irq 10 flags 18
 #
 # ELSA PCC-16
 options 	"ELSA_PCC16"
-#device		isic0	at isa? port 0x360 irq 10 flags 19
+#device		isic0	at isa? port 0x360 irq 10 flags 20
 #
-# PnP-Cards:
-# ----------
+# ISA bus PnP Cards:
+# ------------------
 #
 # Teles S0/16.3 PnP
 options 	TEL_S0_16_3_P
-#device		isic0	at isa? port ? irq ?
+#device		isic0
 #
 # Creatix ISDN-S0 P&P
 options 	CRTX_S0_P
-#device		isic0	at isa? port ? irq ?
+#device		isic0
 #
 # Dr. Neuhaus Niccy Go@
 options 	DRN_NGO
-#device		isic0	at isa? port ? irq ?
+#device		isic0
 #
 # Sedlbauer Win Speed
 options 	SEDLBAUER
-#device		isic0	at isa? port ? irq ?
+#device		isic0
 #
-# Dynalink IS64PH
-options 	DYNALINK
-#device		isic0	at isa? port ? irq ?
+# Dynalink IS64PH (not supported yet!)
+#options 	DYNALINK 
+#device		isic0
 #
 # ELSA QuickStep 1000pro ISA
 options 	ELSA_QS1ISA
-#device		isic0	at isa? port ? irq ?
+#device		isic0
 #
-# ITK ix1 Micro ( V.3, PnP version )
-options 	"ITKIX1"
-#device		isic0	at isa? port ? irq ?
+# ITK ix1 Micro ( V.3, PnP version ) (not supported yet!)
+#options 	"ITKIX1"
+#device		isic0
 #
-# AVM Fritz!Card PnP
-options 	"AVM_PNP"
-#device 		isic0	at isa? port ? irq ?
+# AVM Fritz!Card PnP (not supported yet!)
+#options 	"AVM_PNP"
+#device 	isic0
 #
 # Siemens I-Surf 2.0
 options 	"SIEMENS_ISURF2"
-#device		isic0	at isa? port ? irq ?
+#device		isic0
 #
-# PCI-Cards:
-# ----------
+# PCI bus Cards:
+# --------------
 #
-# ELSA QuickStep 1000pro PCI
+# ELSA MicroLink ISDN/PCI (same as ELSA QuickStep 1000pro PCI)
 options 	ELSA_QS1PCI
 #device		isic0
 #
@@ -2037,17 +2041,18 @@ options 	ELSA_QS1PCI
 options 	"AVM_A1_PCI"
 #device		isic0
 #
-# PCMCIA-Cards:
+# PCMCIA Cards:
 # -------------
 #
-# AVM PCMCIA Fritz!Card
-options 	AVM_A1_PCMCIA
-device		isic0	at isa? port 0x340 irq 5 flags 10
+# AVM PCMCIA Fritz!Card (not supported yet!)
+#options 	AVM_A1_PCMCIA
+#device		isic0	at isa? port 0x340 irq 5 flags 10
 #
 # Active Cards:
 # -------------
 #
-# Stollmann Tina-dd control device
+# Stollmann Tina-dd control device 
+# (driver under development, not fully functional!)
 device		tina0	at isa? port 0x260 irq 10
 #
 # ISDN Protocol Stack
@@ -2081,6 +2086,8 @@ pseudo-device	"i4btel"	2
 pseudo-device	"i4bipr"	4
 # enable VJ header compression detection for ipr i/f
 options 	IPR_VJ
+# enable logging of the first n IP packets to isdnd (n=32 here)
+#options	IPR_LOG=32
 #
 # network driver for sync PPP over ISDN
 pseudo-device	"i4bisppp"	4
diff --git a/sys/i386/conf/NOTES b/sys/i386/conf/NOTES
index c98937f..afcfd8b 100644
--- a/sys/i386/conf/NOTES
+++ b/sys/i386/conf/NOTES
@@ -1951,13 +1951,17 @@ controller	pcf0	at isa? port 0x320 irq 5
 
 # ISDN4BSD section
 #
-# see /usr/share/examples/isdn/ROADMAP for an introduction to isdn4bsd.
+# See /usr/share/examples/isdn/ROADMAP for an introduction to isdn4bsd.
 #
 # i4b passive ISDN cards support (isic - I4b Siemens Isdn Chipset driver)
 # note that the ``options'' and ``device'' lines must BOTH be defined !
 #
-# Non-PnP Cards:
-# --------------
+# Driver entries marked "(not supported yet!)" are not working currently
+# due to not being converted to newbus. We hope to get them back to support
+# in the near future.
+#
+# ISA bus non-PnP Cards:
+# ----------------------
 #
 # Teles S0/8 or Niccy 1008
 options 	TEL_S0_8
@@ -1975,61 +1979,61 @@ options 	TEL_S0_16_3
 options 	AVM_A1
 #device		isic0	at isa? port 0x340 irq 5 flags 4
 #
-# USRobotics Sportster ISDN TA intern
-options 	USR_STI
+# USRobotics Sportster ISDN TA intern (not supported yet!)
+#options 	USR_STI
 #device		isic0	at isa? port 0x268 irq 5 flags 7
 #
-# ITK ix1 Micro ( < V.3, non-PnP version )
-options 	ITKIX1
+# ITK ix1 Micro ( < V.3, non-PnP version ) (not supported yet!)
+#options 	ITKIX1
 #device		isic0	at isa? port 0x398 irq 10 flags 18
 #
 # ELSA PCC-16
 options 	"ELSA_PCC16"
-#device		isic0	at isa? port 0x360 irq 10 flags 19
+#device		isic0	at isa? port 0x360 irq 10 flags 20
 #
-# PnP-Cards:
-# ----------
+# ISA bus PnP Cards:
+# ------------------
 #
 # Teles S0/16.3 PnP
 options 	TEL_S0_16_3_P
-#device		isic0	at isa? port ? irq ?
+#device		isic0
 #
 # Creatix ISDN-S0 P&P
 options 	CRTX_S0_P
-#device		isic0	at isa? port ? irq ?
+#device		isic0
 #
 # Dr. Neuhaus Niccy Go@
 options 	DRN_NGO
-#device		isic0	at isa? port ? irq ?
+#device		isic0
 #
 # Sedlbauer Win Speed
 options 	SEDLBAUER
-#device		isic0	at isa? port ? irq ?
+#device		isic0
 #
-# Dynalink IS64PH
-options 	DYNALINK
-#device		isic0	at isa? port ? irq ?
+# Dynalink IS64PH (not supported yet!)
+#options 	DYNALINK 
+#device		isic0
 #
 # ELSA QuickStep 1000pro ISA
 options 	ELSA_QS1ISA
-#device		isic0	at isa? port ? irq ?
+#device		isic0
 #
-# ITK ix1 Micro ( V.3, PnP version )
-options 	"ITKIX1"
-#device		isic0	at isa? port ? irq ?
+# ITK ix1 Micro ( V.3, PnP version ) (not supported yet!)
+#options 	"ITKIX1"
+#device		isic0
 #
-# AVM Fritz!Card PnP
-options 	"AVM_PNP"
-#device 		isic0	at isa? port ? irq ?
+# AVM Fritz!Card PnP (not supported yet!)
+#options 	"AVM_PNP"
+#device 	isic0
 #
 # Siemens I-Surf 2.0
 options 	"SIEMENS_ISURF2"
-#device		isic0	at isa? port ? irq ?
+#device		isic0
 #
-# PCI-Cards:
-# ----------
+# PCI bus Cards:
+# --------------
 #
-# ELSA QuickStep 1000pro PCI
+# ELSA MicroLink ISDN/PCI (same as ELSA QuickStep 1000pro PCI)
 options 	ELSA_QS1PCI
 #device		isic0
 #
@@ -2037,17 +2041,18 @@ options 	ELSA_QS1PCI
 options 	"AVM_A1_PCI"
 #device		isic0
 #
-# PCMCIA-Cards:
+# PCMCIA Cards:
 # -------------
 #
-# AVM PCMCIA Fritz!Card
-options 	AVM_A1_PCMCIA
-device		isic0	at isa? port 0x340 irq 5 flags 10
+# AVM PCMCIA Fritz!Card (not supported yet!)
+#options 	AVM_A1_PCMCIA
+#device		isic0	at isa? port 0x340 irq 5 flags 10
 #
 # Active Cards:
 # -------------
 #
-# Stollmann Tina-dd control device
+# Stollmann Tina-dd control device 
+# (driver under development, not fully functional!)
 device		tina0	at isa? port 0x260 irq 10
 #
 # ISDN Protocol Stack
@@ -2081,6 +2086,8 @@ pseudo-device	"i4btel"	2
 pseudo-device	"i4bipr"	4
 # enable VJ header compression detection for ipr i/f
 options 	IPR_VJ
+# enable logging of the first n IP packets to isdnd (n=32 here)
+#options	IPR_LOG=32
 #
 # network driver for sync PPP over ISDN
 pseudo-device	"i4bisppp"	4
diff --git a/sys/i386/conf/files.i386 b/sys/i386/conf/files.i386
index 4af0f61..a7433e3 100644
--- a/sys/i386/conf/files.i386
+++ b/sys/i386/conf/files.i386
@@ -375,22 +375,21 @@ i386/svr4/svr4_machdep.c	optional	compat_svr4
 i4b/layer1/i4b_asuscom_ipac.c	optional	isic
 i4b/layer1/i4b_avm_a1.c		optional	isic
 i4b/layer1/i4b_avm_fritz_pci.c	optional	isic
-i4b/layer1/i4b_avm_fritz_pcmcia.c optional	isic
-i4b/layer1/i4b_avm_fritz_pnp.c	optional	isic
+#i4b/layer1/i4b_avm_fritz_pcmcia.c optional	isic
+#i4b/layer1/i4b_avm_fritz_pnp.c	optional	isic
 i4b/layer1/i4b_bchan.c		optional	isic
 i4b/layer1/i4b_ctx_s0P.c	optional	isic
 i4b/layer1/i4b_drn_ngo.c	optional	isic
-i4b/layer1/i4b_dynalink.c	optional	isic
+#i4b/layer1/i4b_dynalink.c	optional	isic
 i4b/layer1/i4b_elsa_qs1i.c	optional	isic
 i4b/layer1/i4b_elsa_qs1p.c	optional	isic
 i4b/layer1/i4b_hscx.c		optional	isic
 i4b/layer1/i4b_isac.c		optional	isic
 i4b/layer1/i4b_isic.c		optional	isic
 i4b/layer1/i4b_isic_isa.c	optional	isic
-i4b/layer1/i4b_isic_pci.c	optional	isic
-i4b/layer1/i4b_isic_pcmcia.c	optional	isic
+#i4b/layer1/i4b_isic_pcmcia.c	optional	isic
 i4b/layer1/i4b_isic_pnp.c	optional	isic
-i4b/layer1/i4b_itk_ix1.c	optional	isic
+#i4b/layer1/i4b_itk_ix1.c	optional	isic
 i4b/layer1/i4b_l1.c		optional	isic
 i4b/layer1/i4b_l1fsm.c		optional	isic
 i4b/layer1/i4b_siemens_isurf.c	optional	isic
@@ -398,8 +397,7 @@ i4b/layer1/i4b_sws.c		optional	isic
 i4b/layer1/i4b_tel_s016.c	optional	isic
 i4b/layer1/i4b_tel_s0163.c	optional	isic
 i4b/layer1/i4b_tel_s08.c	optional	isic
-i4b/layer1/i4b_tel_s0P.c	optional	isic
-i4b/layer1/i4b_usr_sti.c	optional	isic
+#i4b/layer1/i4b_usr_sti.c	optional	isic
 isa/atkbd_isa.c			optional	atkbd
 isa/atkbdc_isa.c		optional	atkbdc
 isa/psm.c			optional	psm
diff --git a/sys/i386/conf/options.i386 b/sys/i386/conf/options.i386
index 376f048..fe38c4e 100644
--- a/sys/i386/conf/options.i386
+++ b/sys/i386/conf/options.i386
@@ -149,7 +149,7 @@ TEL_S0_16		opt_i4b.h
 TEL_S0_16_3		opt_i4b.h
 AVM_A1			opt_i4b.h
 USR_STI			opt_i4b.h
-ITKIX1			opt_i4b.h
+#ITKIX1			opt_i4b.h
 ELSA_PCC16		opt_i4b.h
 # -------------------------------
 # isdn4bsd: passive ISA PnP cards
@@ -158,10 +158,10 @@ CRTX_S0_P		opt_i4b.h
 DRN_NGO                 opt_i4b.h
 TEL_S0_16_3_P		opt_i4b.h
 SEDLBAUER		opt_i4b.h
-DYNALINK		opt_i4b.h
+#DYNALINK		opt_i4b.h
 ASUSCOM_IPAC		opt_i4b.h
 ELSA_QS1ISA		opt_i4b.h
-AVM_PNP			opt_i4b.h
+#AVM_PNP		opt_i4b.h
 SIEMENS_ISURF2		opt_i4b.h
 # -------------------------------
 # isdn4bsd: passive PCI cards
@@ -171,7 +171,7 @@ AVM_A1_PCI		opt_i4b.h
 # -------------------------------
 # isdn4bsd: passive PCMCIA cards
 # -------------------------------
-AVM_A1_PCMCIA		opt_i4b.h
+#AVM_A1_PCMCIA		opt_i4b.h
 # -------------------------------
 # isdn4bsd: misc options
 # -------------------------------
@@ -179,6 +179,7 @@ AVM_A1_PCMCIA		opt_i4b.h
 I4B_SMP_WORKAROUND      opt_i4b.h
 # enable VJ compression code for ipr i/f
 IPR_VJ			opt_i4b.h
+IPR_LOG			opt_i4b.h
 
 # -------------------------------
 # oltr: build options