diff options
author | sos <sos@FreeBSD.org> | 1997-07-29 12:57:25 +0000 |
---|---|---|
committer | sos <sos@FreeBSD.org> | 1997-07-29 12:57:25 +0000 |
commit | f827c62c9475af527049150cf7d9a49b7de4a320 (patch) | |
tree | 32e45cda9f89f75172ef5829d0b77d8a83696047 /sys/pci | |
parent | a1031fb59c2f70ad1ae5de85ca3c28fdd7b57ac5 (diff) | |
download | FreeBSD-src-f827c62c9475af527049150cf7d9a49b7de4a320.zip FreeBSD-src-f827c62c9475af527049150cf7d9a49b7de4a320.tar.gz |
Add support for busmaster DMA on some PCI IDE chipsets.
I changed a few bits here and there, mainly renaming wd82371.c
to ide_pci.c now that it's supposed to handle different chipsets.
It runs on my P6 natoma board with two Maxtor drives, and also
on a Fujitsu machine I have at work with an Opti chipset and
a Quantum drive.
Submitted by:cgull@smoke.marlboro.vt.us <John Hood>
Original readme:
*** WARNING ***
This code has so far been tested on exactly one motherboard with two
identical drives known for their good DMA support.
This code, in the right circumstances, could corrupt data subtly,
silently, and invisibly, in much the same way that older PCI IDE
controllers do. It's ALPHA-quality code; there's one or two major
gaps in my understanding of PCI IDE still. Don't use this code on any
system with data that you care about; it's only good for hack boxes.
Expect that any data may be silently and randomly corrupted at any
moment. It's a disk driver. It has bugs. Disk drivers with bugs
munch data. It's a fact of life.
I also *STRONGLY* recommend getting a copy of your chipset's manual
and the ATA-2 or ATA-3 spec and making sure that timing modes on your
disk drives and IDE controller are being setup correctly by the BIOS--
because the driver makes only the lamest of attempts to do this just
now.
*** END WARNING ***
that said, i happen to think the code is working pretty well...
WHAT IT DOES:
this code adds support to the wd driver for bus mastering PCI IDE
controllers that follow the SFF-8038 standard. (all the bus mastering
PCI IDE controllers i've seen so far do follow this standard.) it
should provide busmastering on nearly any current P5 or P6 chipset,
specifically including any Intel chipset using one of the PIIX south
bridges-- this includes the '430FX, '430VX, '430HX, '430TX, '440LX,
and (i think) the Orion '450GX chipsets. specific support is also
included for the VIA Apollo VP-1 chipset, as it appears in the
relabeled "HXPro" incarnation seen on cheap US$70 taiwanese
motherboards (that's what's in my development machine). it works out
of the box on controllers that do DMA mode2; if my understanding is
correct, it'll probably work on Ultra-DMA33 controllers as well.
it'll probably work on busmastering IDE controllers in PCI slots, too,
but this is an area i am less sure about.
it cuts CPU usage considerably and improves drive performance
slightly. usable numbers are difficult to come by with existing
benchmark tools, but experimentation on my K5-P90 system, with VIA
VP-1 chipset and Quantum Fireball 1080 drives, shows that disk i/o on
raw partitions imposes perhaps 5% cpu load. cpu load during
filesystem i/o drops a lot, from near 100% to anywhere between 30% and
70%. (the improvement may not be as large on an Intel chipset; from
what i can tell, the VIA VP-1 may not be very efficient with PCI I/O.)
disk performance improves by 5% or 10% with these drives.
real, visible, end-user performance improvement on a single user
machine is about nil. :) a kernel compile was sped up by a whole three
seconds. it *does* feel a bit better-behaved when the system is
swapping heavily, but a better disk driver is not the fix for *that*
problem.
THE CODE:
this code is a patch to wd.c and wd82371.c, and associated header
files. it should be considered alpha code; more work needs to be
done.
wd.c has fairly clean patches to add calls to busmaster code, as
implemented in wd82371.c and potentially elsewhere (one could imagine,
say, a Mac having a different DMA controller).
wd82371.c has been considerably reworked: the wddma interface that it
presents has been changed (expect more changes), many bugs have been
fixed, a new internal interface has been added for supporting
different chipsets, and the PCI probe has been considerably extended.
the interface between wd82371.c and wd.c is still fairly clean, but
i'm not sure it's in the right place. there's a mess of issues around
ATA/ATAPI that need to be sorted out, including ATAPI support, CD-ROM
support, tape support, LS-120/Zip support, SFF-8038i DMA, UltraDMA,
PCI IDE controllers, bus probes, buggy controllers, controller timing
setup, drive timing setup, world peace and kitchen sinks. whatever
happens with all this and however it gets partitioned, it is fairly
clear that wd.c needs some significant rework-- probably a complete
rewrite.
timing setup on disk controllers is something i've entirely punted on.
on my development machine, it appears that the BIOS does at least some
of the necessary timing setup. i chose to restrict operation to
drives that are already configured for Mode4 PIO and Mode2 multiword
DMA, since the timing is essentially the same and many if not most
chipsets use the same control registers for DMA and PIO timing.
does anybody *know* whether BIOSes are required to do timing setup for
DMA modes on drives under their care?
error recovery is probably weak. early on in development, i was
getting drive errors induced by bugs in the driver; i used these to
flush out the worst of the bugs in the driver's error handling, but
problems may remain. i haven't got a drive with bad sectors i can
watch the driver flail on.
complaints about how wd82371.c has been reindented will be ignored
until the FreeBSD project has a real style policy, there is a
mechanism for individual authors to match it (indent flags or an emacs
c-mode or whatever), and it is enforced. if i'm going to use a source
style i don't like, it would help if i could figure out what it *is*
(style(9) is about half of a policy), and a way to reasonably
duplicate it. i ended up wasting a while trying to figure out what
the right thing to do was before deciding reformatting the whole thing
was the worst possible thing to do, except for all the other
possibilities.
i have maintained wd.c's indentation; that was not too hard,
fortunately.
TO INSTALL:
my dev box is freebsd 2.2.2 release. fortunately, wd.c is a living
fossil, and has diverged very little recently. included in this
tarball is a patch file, 'otherdiffs', for all files except wd82371.c,
my edited wd82371.c, a patch file, 'wd82371.c-diff-exact', against the
2.2.2 dist of 82371.c, and another patch file,
'wd82371.c-diff-whitespace', generated with diff -b (ignore
whitespace). most of you not using 2.2.2 will probably have to use
this last patchfile with 'patch --ignore-whitespace'. apply from the
kernel source tree root. as far as i can tell, this should apply
cleanly on anything from -current back to 2.2.2 and probably back to
2.2.0. you, the kernel hacker, can figure out what to do from here.
if you need more specific directions, you probably should not be
experimenting with this code yet.
to enable DMA support, set flag 0x2000 for that drive in your config
file or in userconfig, as you would the 32-bit-PIO flag. the driver
will then turn on DMA support if your drive and controller pass its
tests. it's a bit picky, probably. on discovering DMA mode failures
or disk errors or transfers that the DMA controller can't deal with,
the driver will fall back to PIO, so it is wise to setup the flags as
if PIO were still important.
'controller wdc0 at isa? port "IO_WD1" bio irq 14 flags 0xa0ffa0ff
vector wdintr' should work with nearly any PCI IDE controller.
i would *strongly* suggest booting single-user at first, and thrashing
the drive a bit while it's still mounted read-only. this should be
fairly safe, even if the driver goes completely out to lunch. it
might save you a reinstall.
one way to tell whether the driver is really using DMA is to check the
interrupt count during disk i/o with vmstat; DMA mode will add an
extremely low number of interrupts, as compared to even multi-sector
PIO.
boot -v will give you a copious register dump of timing-related info
on Intel and VIAtech chipsets, as well as PIO/DMA mode information on
all hard drives. refer to your ATA and chipset documentation to
interpret these.
WHAT I'D LIKE FROM YOU and THINGS TO TEST:
reports. success reports, failure reports, any kind of reports. :)
send them to cgull+ide@smoke.marlboro.vt.us.
i'd also like to see the kernel messages from various BIOSes (boot -v;
dmesg), along with info on the motherboard and BIOS on that machine.
i'm especially interested in reports on how this code works on the
various Intel chipsets, and whether the register dump works
correctly. i'm also interested in hearing about other chipsets.
i'm especially interested in hearing success/failure reports for PCI
IDE controllers on cards, such as CMD's or Promise's new busmastering
IDE controllers.
UltraDMA-33 reports.
interoperation with ATAPI peripherals-- FreeBSD doesn't work with my
old Hitachi IDE CDROM, so i can't tell if I've broken anything. :)
i'd especially like to hear how the drive copes in DMA operation on
drives with bad sectors. i haven't been able to find any such yet.
success/failure reports on older IDE drives with early support for DMA
modes-- those introduced between 1.5 and 3 years ago, typically
ranging from perhaps 400MB to 1.6GB.
failure reports on operation with more than one drive would be
appreciated. the driver was developed with two drives on one
controller, the worst-case situation, and has been tested with one
drive on each controller, but you never know...
any reports of messages from the driver during normal operation,
especially "reverting to PIO mode", or "dmaverify odd vaddr or length"
(the DMA controller is strongly halfword oriented, and i'm curious to
know if any FreeBSD usage actually needs misaligned transfers).
performance reports. beware that bonnie's CPU usage reporting is
useless for IDE drives; the best test i've found has been to run a
program that runs a spin loop at an idle priority and reports how many
iterations it manages, and even that sometimes produces numbers i
don't believe. performance reports of multi-drive operation are
especially interesting; my system cannot sustain full throughput on
two drives on separate controllers, but that may just be a lame
motherboard.
THINGS I'M STILL MISSING CLUE ON:
* who's responsible for configuring DMA timing modes on IDE drives?
the BIOS or the driver?
* is there a spec for dealing with Ultra-DMA extensions?
* are there any chipsets or with bugs relating to DMA transfer that
should be blacklisted?
* are there any ATA interfaces that use some other kind of DMA
controller in conjunction with standard ATA protocol?
FINAL NOTE:
after having looked at the ATA-3 spec, all i can say is, "it's ugly".
*especially* electrically. the IDE bus is best modeled as an
unterminated transmission line, these days.
for maximum reliability, keep your IDE cables as short as possible and
as few as possible. from what i can tell, most current chipsets have
both IDE ports wired into a single buss, to a greater or lesser
degree. using two cables means you double the length of this bus.
SCSI may have its warts, but at least the basic analog design of the
bus is still somewhat reasonable. IDE passed beyond the veil two
years ago.
--John Hood, cgull@smoke.marlboro.vt.us
Diffstat (limited to 'sys/pci')
-rw-r--r-- | sys/pci/ide_pci.c | 817 | ||||
-rw-r--r-- | sys/pci/ide_pcireg.h | 63 | ||||
-rw-r--r-- | sys/pci/pcisupport.c | 11 |
3 files changed, 890 insertions, 1 deletions
diff --git a/sys/pci/ide_pci.c b/sys/pci/ide_pci.c new file mode 100644 index 0000000..e8e13c7 --- /dev/null +++ b/sys/pci/ide_pci.c @@ -0,0 +1,817 @@ +/* + * Copyright 1996 Massachusetts Institute of Technology + * + * Permission to use, copy, modify, and distribute this software and + * its documentation for any purpose and without fee is hereby + * granted, provided that both the above copyright notice and this + * permission notice appear in all copies, that both the above + * copyright notice and this permission notice appear in all + * supporting documentation, and that the name of M.I.T. not be used + * in advertising or publicity pertaining to distribution of the + * software without specific, written prior permission. M.I.T. makes + * no representations about the suitability of this software for any + * purpose. It is provided "as is" without express or implied + * warranty. + * + * THIS SOFTWARE IS PROVIDED BY M.I.T. ``AS IS''. M.I.T. DISCLAIMS + * ALL EXPRESS OR IMPLIED WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT + * SHALL M.I.T. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * From: wd82371.c,v 1.5.2.1 1996/11/16 21:19:51 phk Exp $ + * $Id$ + */ + +#include "pci.h" +#if NPCI > 0 + +#include <sys/param.h> +#include <sys/systm.h> +#include <sys/queue.h> +#include <sys/proc.h> +#include <sys/buf.h> +#include <sys/malloc.h> +#include <sys/kernel.h> +#include <vm/vm.h> +#include <vm/pmap.h> + +#include <machine/pmap.h> /* for vtophys */ + +#include <i386/isa/wdreg.h> + +#include <pci/pcivar.h> +#include <pci/pcireg.h> +#include <pci/ide_pcireg.h> + +struct ide_pci_cookie; /* structs vendor_fns, ide_pci_cookie are recursive */ + +struct vendor_fns { + int (*vendor_dmainit) /* initialize DMA controller and drive */ + (struct ide_pci_cookie *cookie, + struct wdparams *wp, + int(*wdcmd)(int, void *), + void *); + + void (*vendor_status) /* prints off DMA timing info */ + (int iobase_wd, + int unit, + int iobase_bm, + pcici_t tag, + pcidi_t type); +}; + +/* + * XXX the fact that this list keeps all kinds of info on PCI controllers + * is pretty grotty-- much of this should be replaced by a proper integration + * of PCI probes into the wd driver. + * XXX if we're going to support native-PCI controllers, we also need to + * keep the address of the IDE control block register, which is something wd.c + * needs to know, which is why this info is in the wrong place. + */ + +struct ide_pci_cookie { + LIST_ENTRY(ide_pci_cookie) le; + int iobase_wd; + int unit; + int iobase_bm; /* SFF-8038 control registers */ + pcici_t tag; + pcidi_t type; + struct ide_pci_prd *prd; + struct vendor_fns vs; +}; + +struct ide_pci_softc { + LIST_HEAD(, ide_pci_cookie) cookies; +}; + +static int +generic_dmainit(struct ide_pci_cookie *cookie, + struct wdparams *wp, + int(*wdcmd)(int, void *), + void *wdinfo); +static void +generic_status(int iobase_wd, + int unit, + int iobase_bm, + pcici_t tag, + pcidi_t type); +static void +via_571_status(int iobase_wd, + int unit, + int iobase_bm, + pcici_t tag, + pcidi_t type); +static void +intel_piix_dump_drive(char *ctlr, + int sitre, + int word40, + int word44, + int drive); +static void +intel_piix_status(int iobase_wd, + int unit, + int iobase_bm, + pcici_t tag, + pcidi_t type); + +static struct ide_pci_cookie * +mkcookie(int iobase_wd, + int unit, + int iobase_bm, + pcici_t tag, + pcidi_t type, + struct vendor_fns *vp); + + + +static void ide_pci_attach(pcici_t tag, int unit); +static void *ide_pci_candma(int, int); +static int ide_pci_dmainit(void *, + struct wdparams *, + int (*)(int, void *), + void *); +static int ide_pci_dmaverify(void *, char *, u_long, int); +static int ide_pci_dmasetup(void *, char *, u_long, int); +static void ide_pci_dmastart(void *); +static int ide_pci_dmadone(void *); +static int ide_pci_status(void *); +static int ide_pci_timing(void *, int); + +static struct ide_pci_softc softc; + +static int ide_pci_softc_cookies_initted = 0; + +/* + * PRD_ALLOC_SIZE should be something that will not be allocated across a 64k + * boundary. + * PRD_MAX_SEGS is defined to be the maximum number of segments required for + * a transfer on an IDE drive, for an xfer that is linear in virtual memory. + * PRD_BUF_SIZE is the size of the buffer needed for a PRD table. + */ +#define PRD_ALLOC_SIZE PAGE_SIZE +#define PRD_MAX_SEGS ((256 * 512 / PAGE_SIZE) + 1) +#define PRD_BUF_SIZE PRD_MAX_SEGS * 8 + +static void *prdbuf = 0; +static void *prdbuf_next = 0; + +/* + * Hardware specific IDE controller code. All vendor-specific code + * for handling IDE timing and other chipset peculiarities should be + * encapsulated here. + */ + +/* Generic busmastering PCI-IDE */ + +static int +generic_dmainit(struct ide_pci_cookie *cookie, + struct wdparams *wp, + int(*wdcmd)(int, void *), + void *wdinfo) +{ + int mode, r; + /* + * XXX punt on the whole timing issue by looking for either a + * drive programmed for both PIO4 and mDMA2 (which use similar + * timing) or a drive in an UltraDMA mode (hopefully all + * controllers have separate timing for UDMA). one hopes that if + * the drive's DMA mode has been configured by the BIOS, the + * controller's has also. this code may eventually be replaced + * by gunk in the hw-specific code to deal with specific + * controllers. + */ + /* XXX way too sick and twisted conditional */ + if (!((((wp->wdp_atavalid & 2) == 2) && + ((wp->wdp_dmamword & 0x404) == 0x404) && + ((wp->wdp_eidepiomodes & 2) == 2)) || + (((wp->wdp_atavalid & 4) == 4) && + (wp->wdp_udmamode == 4)))) + return 0; + +#if 0 + /* + * XXX flesh this out into real code that actually + * does something-- this was just testing gunk. + */ + if (((wp->wdp_atavalid & 0x4) == 0x4) && + (wp->wdp_udmamode == 4)) { + printf("UDMA mode\n"); + mode = 0x42; /* XXX where's the #defines... */ + } + else { + printf("MDMA mode\n"); + mode = 0x24; + } + + r = wdcmd(mode, wdinfo); + printf("dmainit out like we expect\n"); + if (!r) + return 0; +#endif + return 1; +} + +static void +generic_status(int iobase_wd, + int unit, + int iobase_bm, + pcici_t tag, + pcidi_t type) +{ + printf("generic_status: no PCI IDE timing info available\n"); +} + +static struct vendor_fns vs_generic = +{ + generic_dmainit, + generic_status +}; + +/* VIA Technologies "82C571" PCI-IDE controller core */ + +static void +via_571_status(int iobase_wd, + int unit, + int iobase_bm, + pcici_t tag, + pcidi_t type) +{ + unsigned int word40[5]; + int i; + + /* XXX how to handle four calls for one controller? */ + if (iobase_wd != 0x1f0 || unit != 0) + return; + + for (i=0; i<5; i++) { + word40[i] = pci_conf_read(tag, i * 4 + 0x40); + } + + printf("via_571_status: Primary IDE prefetch/postwrite %s/%s\n", + word40[0] & 0x8000 ? "enabled" : "disabled", + word40[0] & 0x4000 ? "enabled" : "disabled"); + printf("via_571_status: Secondary IDE prefetch/postwrite %s/%s\n", + word40[0] & 0x2000 ? "enabled" : "disabled", + word40[0] & 0x1000 ? "enabled" : "disabled"); + + printf("via_571_status: Master %d read/%d write IRDY# wait states\n", + (word40[1] & 0x40) >> 6, + (word40[1] & 0x20) >> 5); + printf("via_571_status: busmaster status read retry %s\n", + (word40[1] & 0x10) ? "enabled" : "disabled"); + + for (i=0; i<4; i++) + printf("via_571_status: %s drive %d setup=%d active=%d recovery=%d\n", + i < 2 ? "primary" : "secondary", + i & 1, + ((word40[3] >> ((3 - i) * 2)) & 3) + 1, + ((word40[2] >> (((3 - i) * 8) + 4)) & 0x0f) + 1, + ((word40[2] >> ((3 - i) * 8)) & 0x0f) + 1); + + + /* XXX could go on and do UDMA status for '586B */ +} + +static struct vendor_fns vs_via_571 = +{ + generic_dmainit, + via_571_status +}; + +/* Intel PIIX, PIIX3, and PIIX4 IDE controller subfunctions */ + +static void +intel_piix_dump_drive(char *ctlr, + int sitre, + int word40, + int word44, + int drive) +{ + char *ms; + + if (!sitre) + ms = "master/slave"; + else if (drive == 0) + ms = "master"; + else + ms = "slave"; + + if (sitre || drive == 0) + printf("intel_piix_status: %s %s sample = %d, %s recovery = %d\n", + ctlr, + ms, + 5 - ((sitre && drive) ? + ((word44 >> 2) & 3) : + ((word40 >> 12) & 3)), + ms, + 4 - ((sitre && drive) ? + ((word44 >> 0) & 3) : + ((word40 >> 8) & 3))); + + word40 >>= (drive * 4); + printf("\ +intel_piix_status: %s %s fastDMAonly %s, pre/post %s,\n\ +intel_piix_status: IORDY sampling %s,\n\ +intel_piix_status: fast PIO %s%s\n", + ctlr, + (drive == 0) ? "master" : "slave", + (word40 & 8) ? "enabled" : "disabled", + (word40 & 4) ? "enabled" : "disabled", + (word40 & 2) ? "enabled" : "disabled", + (word40 & 1) ? "enabled" : "disabled", + ((word40 & 9) == 9) ? " (overridden by fastDMAonly)" : "" ); + + /* XXX extend to dump 82371AB's UltraDMA modes */ +} + +static void +intel_piix_status(int iobase_wd, + int unit, + int iobase_bm, + pcici_t tag, + pcidi_t type) +{ + unsigned int word40, word44; + int sitre; + + /* XXX how to handle four calls for one controller? */ + if (iobase_wd != 0x1f0 || unit != 0) + return; + + word40 = pci_conf_read(tag, 0x40); + word44 = pci_conf_read(tag, 0x44); + + sitre = word40 & 0x4000; + + intel_piix_dump_drive("primary", sitre, word40 & 0xffff, word44 & 0x0f, 0); + intel_piix_dump_drive("primary", sitre, word40 & 0xffff, word44 & 0x0f, 1); + intel_piix_dump_drive("secondary", + sitre, + (word40 >> 16) & 0xffff, + (word44 >> 4) & 0x0f,0); + intel_piix_dump_drive("secondary", + sitre, + (word40 >> 16) & 0xffff, + (word44 >> 4) & 0x0f,1); +} + +static struct vendor_fns vs_intel_piix = +{ + generic_dmainit, + intel_piix_status +}; + +/* Generic SFF-8038i code-- all code below here, except for PCI probes, + * more or less conforms to the SFF-8038i spec as extended for PCI. + * There should be no code that goes beyond that feature set below. + */ + +/* XXX mkcookie is overloaded with too many parameters */ + +static struct ide_pci_cookie * +mkcookie(int iobase_wd, + int unit, + int iobase_bm, + pcici_t tag, + pcidi_t type, + struct vendor_fns *vp) +{ + struct ide_pci_cookie *cp; + + cp = malloc(sizeof *cp, M_DEVBUF, M_NOWAIT); + if (!cp) return cp; + + cp->iobase_wd = iobase_wd; + cp->unit = unit; + cp->tag = tag; + cp->type = type; + cp->iobase_bm = iobase_bm; + bcopy(vp, &cp->vs, sizeof(struct vendor_fns)); + + if (!prdbuf) { + prdbuf = malloc(PRD_ALLOC_SIZE, M_DEVBUF, M_NOWAIT); + if (!prdbuf) { + FREE(cp, M_DEVBUF); + return 0; + } + if (((int)prdbuf >> PAGE_SHIFT) ^ + (((int)prdbuf + PRD_ALLOC_SIZE - 1) >> PAGE_SHIFT)) { + printf("ide_pci: prdbuf straddles page boundary, no DMA"); + FREE(cp, M_DEVBUF); + FREE(prdbuf, M_DEVBUF); + return 0; + } + + prdbuf_next = prdbuf; + } + cp->prd = prdbuf_next; + (char *)prdbuf_next += PRD_BUF_SIZE; + + if ((char *)prdbuf_next > ((char *)prdbuf + PRD_ALLOC_SIZE)) + panic("ide_pci: too many prdbufs allocated"); + + if (bootverbose) + printf("ide_pci: mkcookie %04x:%d: PRD vstart = %08x vend = %08x\n", + iobase_wd, unit, (int)cp->prd, ((int)cp->prd)+PRD_BUF_SIZE); + LIST_INSERT_HEAD(&softc.cookies, cp, le); + return cp; +} + +static char * +ide_pci_probe(pcici_t tag, pcidi_t type) +{ + int data = pci_conf_read(tag, PCI_CLASS_REG); + + switch (data & PCI_CLASS_MASK) { + + case PCI_CLASS_MASS_STORAGE: + if ((data & PCI_SUBCLASS_MASK) == 0x00010000) { + if (type == 0x71118086) + return ("Intel PIIX4 Bus-master IDE controller"); + if (type == 0x70108086) + return ("Intel PIIX3 Bus-master IDE controller"); + if (type == 0x12308086) + return ("Intel PIIX Bus-master IDE controller"); + if (type == 0x05711106) + return ("VIA 82C586x (Apollo) Bus-master IDE controller"); + if (data & 0x8000) + return ("PCI IDE controller (busmaster capable)"); +/* + * XXX leave this out for now, to allow CMD640B hack to work. said + * hack should be better integrated, or something. + */ +#if 0 + else + return ("PCI IDE controller (not busmaster capable)"); +#endif + } + }; + return ((char*)0); +} + +static void +ide_pci_attach(pcici_t tag, int unit) +{ + u_long idetm; + int class; + int bmista; + int iobase_wd, iobase_bm; + int cmd; + struct vendor_fns *vp; + pcidi_t type; + + if (unit) return; + + /* is it busmaster capable? bail if not */ + class = pci_conf_read(tag, PCI_CLASS_REG); + if (!(class & 0x8000)) return; + + /* is it enabled and is busmastering turned on? */ + cmd = pci_conf_read(tag, PCI_COMMAND_STATUS_REG); + if ((cmd & 5) != 5) return; + + /* set up vendor-specific stuff */ + type = pci_conf_read(tag, PCI_ID_REG); + + switch (type) { + case 0x71118086: + case 0x70108086: + case 0x12308086: + /* Intel PIIX, PIIX3, PIIX4 */ + vp = &vs_intel_piix; + break; + + case 0x5711106: + /* VIA Apollo chipset family */ + vp = &vs_via_571; + break; + + default: + /* everybody else */ + vp = &vs_generic; + break; + } + + iobase_wd = (class & 0x100) ? + (pci_conf_read(tag, 0x10) & 0xfffc) : + 0x1f0; + iobase_bm = pci_conf_read(tag, 0x20) & 0xfffc; + + if (!ide_pci_softc_cookies_initted) { + LIST_INIT(&softc.cookies); + ide_pci_softc_cookies_initted = 1; + } + + bmista = inb(iobase_bm + BMISTA_PORT); + + if (bootverbose) + printf("ide_pci: busmaster 0 status: %02x from port: %08x\n", + bmista, iobase_bm+BMISTA_PORT); + + if (!(bmista & BMISTA_DMA0CAP)) + printf("ide_pci: warning, ide0:0 not configured for DMA?\n"); + mkcookie(iobase_wd, 0, iobase_bm, tag, type, vp); + if (bootverbose) + vp->vendor_status(iobase_wd, 0, iobase_bm, tag, type); + + if (!(bmista & BMISTA_DMA1CAP)) + printf("ide_pci: warning, ide0:1 not configured for DMA?\n"); + mkcookie(iobase_wd, 1, iobase_bm, tag, type, vp); + if (bootverbose) + vp->vendor_status(iobase_wd, 1, iobase_bm, tag, type); + + if (bmista & BMISTA_SIMPLEX) { + printf("ide_pci: primary is simplex-only, no DMA on secondary\n"); + } else { + iobase_wd = (class & 0x400) ? + (pci_conf_read(tag, 0x10) & 0xfffc) : + 0x170; + iobase_bm += SFF8038_CTLR_1; + bmista = inb(iobase_bm + BMISTA_PORT); + + if (bootverbose) + printf("ide_pci: busmaster 1 status: %02x from port: %08x\n", + bmista, iobase_bm+BMISTA_PORT); + + if (bmista & BMISTA_SIMPLEX) { + printf("ide_pci: secondary is simplex-only, no DMA on secondary\n"); + } else { + if (!(bmista & BMISTA_DMA0CAP)) + printf("ide_pci: warning, ide1:0 not configured for DMA?\n"); + mkcookie(iobase_wd, 0, iobase_bm, tag, type, vp); + if (bootverbose) + vp->vendor_status(iobase_wd, 0, iobase_bm, tag, type); + if (!(bmista & BMISTA_DMA1CAP)) + printf("ide_pci: warning, ide1:1 not configured for DMA?\n"); + mkcookie(iobase_wd, 1, iobase_bm, tag, type, vp); + if (bootverbose) + vp->vendor_status(iobase_wd, 1, iobase_bm, tag, type); + } + } + + wddma.wdd_candma = ide_pci_candma; + wddma.wdd_dmainit = ide_pci_dmainit; + wddma.wdd_dmaverify = ide_pci_dmaverify; + wddma.wdd_dmaprep = ide_pci_dmasetup; + wddma.wdd_dmastart = ide_pci_dmastart; + wddma.wdd_dmadone = ide_pci_dmadone; + wddma.wdd_dmastatus = ide_pci_status; +} + +static u_long ide_pci_count; + +static struct pci_device ide_pci_device = { + "ide_pci", + ide_pci_probe, + ide_pci_attach, + &ide_pci_count, + 0 +}; + +DATA_SET(pcidevice_set, ide_pci_device); + +/* + * Return a cookie if we can do DMA on the specified (iobase_wd, unit). + */ +static void * +ide_pci_candma(int iobase_wd, int unit) +{ + struct ide_pci_cookie *cp; + + cp = softc.cookies.lh_first; + while(cp) { + if (cp->unit == unit && cp->iobase_wd == iobase_wd) + break; + cp = cp->le.le_next; + } + + return cp; +} + +/* + * Initialize controller and drive for DMA operation, including timing modes. + * Uses data passed from the wd driver and a callback function to initialize + * timing modes on the drive. + */ +static int +ide_pci_dmainit(void *cookie, + struct wdparams *wp, + int(*wdcmd)(int, void *), + void *wdinfo) +{ + struct ide_pci_cookie *cp = cookie; + + return(cp->vs.vendor_dmainit(cp, wp, wdcmd, wdinfo)); +} +/* + * Verify that controller can handle a dma request for cp. Should + * not affect any hardware or driver state. + */ +static int +ide_pci_dmaverify(void *xcp, char *vaddr, u_long count, int dir) +{ + int badfu; + + /* + * check for nonaligned or odd-length Stuff + */ + badfu = ((unsigned int)vaddr & 1) || (count & 1); +#if 1 + if (badfu) { + printf("ide_pci: dmaverify odd vaddr or length, "); + printf("vaddr = %08x length = %08x\n", (int)vaddr, count); + } +#endif + /* + * XXX should perhaps be checking that length of generated table + * does not exceed space available, but that Would Be Hairy + */ + return (!badfu); +} + +/* + * Set up DMA for cp. It is the responsibility of the caller + * to ensure that the controller is idle before this routine + * is called. + */ +static int +ide_pci_dmasetup(void *xcp, char *vaddr, u_long count, int dir) +{ + struct ide_pci_cookie *cp = xcp; + struct ide_pci_prd *prd; + int i; + u_long pgresid; + int iobase_bm; + static int trashmore; + static int *trashmore_p = 0; + + + prd = cp->prd; + i = 0; + + iobase_bm = cp->iobase_bm; + /* + * ensure that 0-length transfers get a PRD that won't smash much + */ + if (!trashmore_p) + trashmore_p = (void *)vtophys(&trashmore); + + prd[0].prd_base = (unsigned int)trashmore_p; + prd[0].prd_count = 0x80000002; + + if (count == 0) { + printf("ide_pci: dmasetup 0-length transfer, "); + printf("vaddr = %08x length = %08x\n", (int)vaddr, count); + } + + /* + * XXX the PRD generation code is somewhat ugly and will not + * port easily to big endian systems. + * + * but it works. + */ + + /* + * Deal with transfers that don't start on a page + * boundary. + */ + pgresid = (u_long)vaddr % PAGE_SIZE; + if (pgresid) { + prd[i].prd_base = vtophys(vaddr); + if (count >= (PAGE_SIZE - pgresid)) + prd[i].prd_count = PAGE_SIZE - pgresid; + else + prd[i].prd_count = count; + vaddr += prd[i].prd_count; + count -= prd[i].prd_count; + i++; + } + + /* + * We have now ensured that vaddr is page-aligned, so just + * step through the pages adding each one onto the list. + */ + while(count) { + u_long phys, n; + + phys = vtophys(vaddr); + n = ((count > PAGE_SIZE) ? PAGE_SIZE : count); + /* + * If the current page is physically contiguous with + * whatever we have in the previous PRD, just tack it + * onto the end. + * CAVEAT: due to a hardware deficiency, PRDs + * cannot cross a 64K boundary. + * XXX should we bother with this collapsing? scattered + * pages appear to be the common case anyway. + */ + if (i > 0 + && (phys == prd[i - 1].prd_base + prd[i - 1].prd_count) + && ((prd[i - 1].prd_base & 0xffff) + + prd[i - 1].prd_count + n) <= 65535) { + + prd[i - 1].prd_count += n; + } else { + prd[i].prd_base = phys; + prd[i].prd_count = n; + i++; + if (i >= PRD_MAX_SEGS) + panic("wd82371: too many segments\n"); + } + count -= n; + vaddr += n; + } + + /* put a sign at the edge of the cliff... */ + prd[(i>0) ? (i-1) : 0].prd_count |= PRD_EOT_BIT; + + if (i == 0) + printf("ide_pci: dmasetup 0-length PRD???\n"); + + /* Set up PRD base register */ + outl(iobase_bm + BMIDTP_PORT, vtophys(prd)); + + /* Set direction of transfer */ + if (dir == B_READ) { + outb(iobase_bm + BMICOM_PORT, BMICOM_READ_WRITE); + } else { + outb(iobase_bm + BMICOM_PORT, 0); + } + + /* Clear interrupt and error bits */ + outb(iobase_bm + BMISTA_PORT, + (inb(iobase_bm + BMISTA_PORT) + | (BMISTA_INTERRUPT | BMISTA_DMA_ERROR))); + + /* printf("dma enable: iobase_bm = %08x command/status = %08x pointer = %08x\n", iobase_bm, inl(iobase_bm + BMICOM_PORT), inl(iobase_bm + BMIDTP_PORT)); */ + + /* printf("P"); */ + + return 0; +} + +static void +ide_pci_dmastart(void *xcp) +{ + struct ide_pci_cookie *cp = xcp; + int iobase_bm; + + iobase_bm = cp->iobase_bm; + + outb(iobase_bm + BMICOM_PORT, + inb(iobase_bm + BMICOM_PORT) | BMICOM_STOP_START); + + /* printf("["); */ +} + +static int +ide_pci_dmadone(void *xcp) +{ + struct ide_pci_cookie *cp = xcp; + int iobase_bm, status; + + status = ide_pci_status(xcp); + iobase_bm = cp->iobase_bm; + + outb(iobase_bm + BMICOM_PORT, + inb(iobase_bm + BMICOM_PORT) & ~BMICOM_STOP_START); + + /* printf("]"); */ + + return status; +} + +static int +ide_pci_status(void *xcp) +{ + struct ide_pci_cookie *cp = xcp; + int iobase_bm, status, bmista; + + status = 0; + iobase_bm = cp->iobase_bm; + + bmista = inb(iobase_bm + BMISTA_PORT); + + /* printf("dmastatus: iobase_bm = %08x status = %02x command/status = %08x pointer = %08x\n", iobase_bm, bmista, inl(iobase_bm + BMICOM_PORT), inl(iobase_bm + BMIDTP_PORT)); */ + + if (bmista & BMISTA_INTERRUPT) + status |= WDDS_INTERRUPT; + if (bmista & BMISTA_DMA_ERROR) + status |= WDDS_ERROR; + if (bmista & BMISTA_DMA_ACTIVE) + status |= WDDS_ACTIVE; + + /* printf( (bmista == BMISTA_INTERRUPT)? "?":"!"); */ + + return status; +} + +#endif /* NPCI > 0 */ diff --git a/sys/pci/ide_pcireg.h b/sys/pci/ide_pcireg.h new file mode 100644 index 0000000..769645f --- /dev/null +++ b/sys/pci/ide_pcireg.h @@ -0,0 +1,63 @@ +/* + * Copyright 1996 Massachusetts Institute of Technology + * + * Permission to use, copy, modify, and distribute this software and + * its documentation for any purpose and without fee is hereby + * granted, provided that both the above copyright notice and this + * permission notice appear in all copies, that both the above + * copyright notice and this permission notice appear in all + * supporting documentation, and that the name of M.I.T. not be used + * in advertising or publicity pertaining to distribution of the + * software without specific, written prior permission. M.I.T. makes + * no representations about the suitability of this software for any + * purpose. It is provided "as is" without express or implied + * warranty. + * + * THIS SOFTWARE IS PROVIDED BY M.I.T. ``AS IS''. M.I.T. DISCLAIMS + * ALL EXPRESS OR IMPLIED WARRANTIES WITH REGARD TO THIS SOFTWARE, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT + * SHALL M.I.T. BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND + * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, + * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT + * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * From: wd82371reg.h,v 1.3 1997/02/22 09:44:15 peter Exp $ + * $Id$ + */ + +#ifndef _PCI_IDEPCIREG_H_ +#define _PCI_IDEPCIREG_H_ 1 + +/* Ports are for controller 0. Add SFF8038_CTLR_1 for controller 1. */ +#define SFF8038_CTLR_1 8 + +/* Contents of BMICOM register */ +#define BMICOM_PORT 0 +#define BMICOM_READ_WRITE 0x0008 /* false = read, true = write */ +#define BMICOM_STOP_START 0x0001 /* false = stop, true = start */ + +/* Contents of BMISTA register */ +#define BMISTA_PORT 2 +#define BMISTA_SIMPLEX 0x0080 /* 1 = controller cannot DMA on both + channels simultaneously */ +#define BMISTA_DMA1CAP 0x0040 /* true = drive 1 can DMA */ +#define BMISTA_DMA0CAP 0x0020 /* true = drive 0 can DMA */ +#define BMISTA_INTERRUPT 0x0004 +#define BMISTA_DMA_ERROR 0x0002 +#define BMISTA_DMA_ACTIVE 0x0001 + +#define BMIDTP_PORT 4 /* use outl */ + +struct ide_pci_prd { + u_int32_t prd_base; + u_int32_t prd_count; +}; + +#define PRD_EOT_BIT 0x80000000 + +#endif /* _PCI_IDEPCIREG_H_ */ diff --git a/sys/pci/pcisupport.c b/sys/pci/pcisupport.c index 1108d30..ac78356 100644 --- a/sys/pci/pcisupport.c +++ b/sys/pci/pcisupport.c @@ -1,6 +1,6 @@ /************************************************************************** ** -** $Id: pcisupport.c,v 1.47 1997/05/30 21:01:47 se Exp $ +** $Id: pcisupport.c,v 1.48 1997/07/18 19:47:23 se Exp $ ** ** Device driver for DEC/INTEL PCI chipsets. ** @@ -167,8 +167,11 @@ chipset_probe (pcici_t tag, pcidi_t type) return ("Intel 82437FX PCI cache memory controller"); case 0x122e8086: return ("Intel 82371FB PCI to ISA bridge"); +#if 0 + /* ide_pci takes care of this now */ case 0x12308086: return ("Intel 82371FB IDE interface"); +#endif case 0x12508086: return ("Intel 82439"); case 0x04061039: @@ -179,12 +182,18 @@ chipset_probe (pcici_t tag, pcidi_t type) return ("SiS 85c601"); case 0x70008086: return ("Intel 82371SB PCI to ISA bridge"); +#if 0 + /* ide_pci takes care of this now */ case 0x70108086: return ("Intel 82371SB IDE interface"); +#endif case 0x71108086: return ("Intel 82371AB PCI to ISA bridge"); +#if 0 + /* ide_pci takes care of this now */ case 0x71118086: return ("Intel 82371AB IDE interface"); +#endif case 0x71128086: return ("Intel 82371AB USB host controller"); case 0x71138086: |