Remove ISDN4BSD (I4B) from HEAD as it is not MPSAFE and

parts relied on the now removed NET_NEEDS_GIANT.
Most of I4B has been disconnected from the build
since July 2007 in HEAD/RELENG_7.

This is what was removed:
- configuration in /etc/isdn
- examples
- man pages
- kernel configuration
- sys/i4b (drivers, layers, include files)
- user space tools
- i4b support from ppp
- further documentation

Discussed with: rwatson, re

1 files changed, 0 insertions, 138 deletions

diff --git a/sys/pc98/conf/NOTES b/sys/pc98/conf/NOTES
index 6f50f50..cc7a4c7 100644
--- a/sys/pc98/conf/NOTES
+++ b/sys/pc98/conf/NOTES
@@ -500,143 +500,6 @@ device		pmtimer			# Adjust system timer at wakeup time
 
 options 	POWERFAIL_NMI	# make it beep instead of panicing
 
-#---------------------------------------------------------------------------
-# ISDN4BSD
-#
-# See /usr/share/examples/isdn/ROADMAP for an introduction to isdn4bsd.
-#
-# i4b passive ISDN cards support contains the following hardware drivers:
-#
-#	isic  - Siemens/Infineon ISDN ISAC/HSCX/IPAC chipset driver
-#	iwic  - Winbond W6692 PCI bus ISDN S/T interface controller
-#	ifpi  - AVM Fritz!Card PCI driver
-#	ifpi2  - AVM Fritz!Card PCI version 2 driver
-#	ihfc  - Cologne Chip HFC ISA/ISA-PnP chipset driver
-#	ifpnp - AVM Fritz!Card PnP driver
-#	itjc  - Siemens ISAC / TJNet Tiger300/320 chipset
-#
-# i4b active ISDN cards support contains the following hardware drivers:
-#
-#	iavc  - AVM B1 PCI, AVM B1 ISA, AVM T1
-#
-# Note that the ``options'' (if given) and ``device'' lines must BOTH
-# be uncommented to enable support for a given card !
-#
-# In addition to a hardware driver (and probably an option) the mandatory
-# ISDN protocol stack devices and the mandatory support device must be
-# enabled as well as one or more devices from the optional devices section.
-#
-#---------------------------------------------------------------------------
-#	isic driver (Siemens/Infineon chipsets)
-#
-device	isic
-#
-# PCI bus Cards:
-# --------------
-#
-# ELSA MicroLink ISDN/PCI (same as ELSA QuickStep 1000pro PCI)
-options 	ELSA_QS1PCI
-#
-#---------------------------------------------------------------------------
-#	ifpnp driver for AVM Fritz!Card PnP
-#
-# AVM Fritz!Card PnP
-device		ifpnp
-#
-#---------------------------------------------------------------------------
-#	ihfc driver for Cologne Chip ISA chipsets (experimental!)
-#
-# Teles 16.3c ISA PnP
-# AcerISDN P10 ISA PnP
-# TELEINT ISDN SPEED No.1
-device		ihfc
-#
-#---------------------------------------------------------------------------
-#	ifpi driver for AVM Fritz!Card PCI
-#
-# AVM Fritz!Card PCI
-device		ifpi
-#
-#---------------------------------------------------------------------------
-#	ifpi2 driver for AVM Fritz!Card PCI version 2
-#
-# AVM Fritz!Card PCI version 2
-device		ifpi2
-#
-#---------------------------------------------------------------------------
-#	iwic driver for Winbond W6692 chipset
-#
-# ASUSCOM P-IN100-ST-D (and other Winbond W6692 based cards)
-device		iwic
-#
-#---------------------------------------------------------------------------
-#	itjc driver for Siemens ISAC / TJNet Tiger300/320 chipset
-#
-# Traverse Technologies NETjet-S
-# Teles PCI-TJ
-device		itjc
-#
-#---------------------------------------------------------------------------
-#	iavc driver (AVM active cards, needs i4bcapi driver!)
-#
-device		iavc
-#
-#---------------------------------------------------------------------------
-#	ISDN Protocol Stack - mandatory for all hardware drivers
-#
-# Q.921 / layer 2 - i4b passive cards D channel handling
-device		i4bq921
-#
-# Q.931 / layer 3 - i4b passive cards D channel handling
-device		i4bq931
-#
-# layer 4 - i4b common passive and active card handling
-device		i4b
-#
-#---------------------------------------------------------------------------
-#	ISDN devices - mandatory for all hardware drivers
-#
-# userland driver to do ISDN tracing (for passive cards only)
-device		i4btrc
-options 	NI4BTRC=4
-#
-# userland driver to control the whole thing
-device		i4bctl
-#
-#---------------------------------------------------------------------------
-#	ISDN devices - optional
-#
-# userland driver for access to raw B channel
-device		i4brbch
-options 	NI4BRBCH=4
-#
-# userland driver for telephony
-device		i4btel
-options 	NI4BTEL=2
-#
-#XXXBZ# IPR and ISPPP are not usable until I4B is locked.
-# network driver for IP over raw HDLC ISDN
-#XXXBZ#device		i4bipr
-#XXXBZ#options 	NI4BIPR=4
-# enable VJ header compression detection for ipr i/f
-#XXXBZ#options 	IPR_VJ
-# enable logging of the first n IP packets to isdnd (n=32 here)
-#XXXBZ#options 	IPR_LOG=32
-#
-# network driver for sync PPP over ISDN; requires an equivalent
-# number of sppp device to be configured
-#XXXBZ#device		i4bisppp
-#XXXBZ#options 	NI4BISPPP=4
-#
-# B-channel interface to the netgraph subsystem
-#XXXBZ#device		i4bing
-#XXXBZ#options 	NI4BING=2
-#
-# CAPI driver needed for active ISDN cards (see iavc driver above)
-device		i4bcapi
-#
-#---------------------------------------------------------------------------
-
 #
 # Set the number of PV entries per process.  Increasing this can
 # stop panics related to heavy use of shared memory.  However, that can
@@ -739,7 +602,6 @@ options 	FB_INSTALL_CDEV		# install a CDEV entry in /dev
 options 	PECOFF_SUPPORT
 options 	PECOFF_DEBUG
 
-options 	I4B_SMP_WORKAROUND
 options 	I586_PMC_GUPROF=0x70000
 options 	KBDIO_DEBUG=2
 options 	KBD_MAXRETRY=4