- Add C-bus and ISA front-ends for le(4) so it can actually replace

  lnc(4) on PC98 and i386. The ISA front-end supports the same non-PNP
  network cards as lnc(4) did and additionally a couple of PNP ones.
  Like lnc(4), the C-bus front-end of le(4) only supports C-NET(98)S
  and is untested due to lack of such hardware, but given that's it's
  based on the respective lnc(4) and not too different from the ISA
  front-end it should be highly likely to work.
- Remove the descriptions of le(4), which where converted from lnc(4),
  from sys/i386/conf/NOTES and sys/pc98/conf/NOTES as there's a common
  one in sys/conf/NOTES.

1 files changed, 4 insertions, 2 deletions

diff --git a/sys/pc98/conf/NOTES b/sys/pc98/conf/NOTES
index 78dc841..b5c4d76 100644
--- a/sys/pc98/conf/NOTES
+++ b/sys/pc98/conf/NOTES
@@ -360,8 +360,6 @@ hint.mse.0.irq="13"
 #       (requires miibus)
 # ie:   AT&T StarLAN 10 and EN100; 3Com 3C507; unknown NI5210;
 #       Intel EtherExpress
-# le:   Lance/PCnet cards (Isolan, Novell NE2100, NE32-VL, AMD Am7990 and
-#       Am79C960)
 # oltr: Olicom ISA token-ring adapters OC-3115, OC-3117, OC-3118 and OC-3133.
 #       Olicom PCI token-ring adapters OC-3136, OC-3137, OC-3139, OC-3140,
 #       OC-3141, OC-3540 and OC-3250.
@@ -384,6 +382,10 @@ hint.ie.2.at="isa"
 hint.ie.2.port="0x300"
 hint.ie.2.irq="5"
 hint.ie.2.maddr="0xd0000"
+# Hint for the PC98-only C-NET(98)S C-bus front-end of le(4).
+hint.le.0.at="isa"
+hint.le.0.port="0x03d0"
+hint.le.0.irq="6"
 device		sbni
 hint.sbni.0.at="isa"
 hint.sbni.0.port="0x210"