Remove these files. They have successors in tools/debugscripts.

5 files changed, 0 insertions, 972 deletions

diff --git a/sys/modules/vinum/.gdbinit.crash b/sys/modules/vinum/.gdbinit.crash
deleted file mode 100644
index f3e6436..0000000
--- a/sys/modules/vinum/.gdbinit.crash
+++ /dev/null
@@ -1,4 +0,0 @@
-source .gdbinit.kernel
-source .gdbinit.vinum.paths
-source .gdbinit.vinum
-asf
diff --git a/sys/modules/vinum/.gdbinit.kernel b/sys/modules/vinum/.gdbinit.kernel
deleted file mode 100644
index c814d7f..0000000
--- a/sys/modules/vinum/.gdbinit.kernel
+++ /dev/null
@@ -1,645 +0,0 @@
-set remotebaud 38400
-set remotetimeout 1
-set complaints 1
-set print pretty
-define xi
-x/10i $eip
-end
-define xs
-x/12x $esp
-end
-define xb
-x/12x $ebp
-end
-define z
-ni
-x/1i $eip
-end
-define zs
-si
-x/1i $eip
-end
-define xp
-printf "      esp: " 
-output/x $esp
-echo  (
-output (((int)$ebp)-(int)$esp)/4-4
-printf " words on stack)\n      ebp: " 
-output/x $ebp
-printf "\n      eip: " 
-x/1i $eip
-printf "Saved ebp: " 
-output/x *(int*)$ebp
-printf " (maximum of "  
-output ((*(int*)$ebp)-(int)$ebp)/4-4
-printf " parameters possible)\nSaved eip: " 
-x/1i *(int*)($ebp+4)
-printf "\nParm 1 at " 
-output/x (int) ($ebp+8)
-printf ":    " 
-output (char*) *(int*)($ebp+8)
-printf "\nParm 2 at " 
-output/x (int) ($ebp+12)
-printf ":    " 
-output (char*) *(int*)($ebp+12)
-printf "\nParm 3 at " 
-output/x (int) ($ebp+16)
-printf ":    " 
-output (char*) *(int*)($ebp+16)
-printf "\nParm 4 at " 
-output/x (int) ($ebp+20)
-printf ":    " 
-output (char*) *(int*)($ebp+20)
-echo \n
-end
-document xp
-Show the register contents and the first four parameter
-words of the current frame.
-end
-define xxp
-printf "      esp: " 
-output/x $esp
-printf "\n      ebp: " 
-output/x $ebp
-printf "\n      eip: " 
-x/1i $eip
-printf "Saved ebp: " 
-output/x *(int*)$ebp
-printf " (maximum of "  
-output ((*(int*)$ebp)-(int)$ebp)/4-4
-printf " parameters possible)\nSaved eip: " 
-x/1i *(int*)($ebp+4)
-printf "\nParm  1 at " 
-output/x (int) ($ebp+8)
-printf ":    " 
-output (char*) *(int*)($ebp+8)
-printf "\nParm  2 at " 
-output/x (int) ($ebp+12)
-printf ":    " 
-output (char*) *(int*)($ebp+12)
-printf "\nParm  3 at " 
-output/x (int) ($ebp+16)
-printf ":    " 
-output (char*) *(int*)($ebp+16)
-printf "\nParm  4 at " 
-output/x (int) ($ebp+20)
-printf ":    " 
-output (char*) *(int*)($ebp+20)
-printf "\nParm  5 at " 
-output/x (int) ($ebp+24)
-printf ":    " 
-output (char*) *(int*)($ebp+24)
-printf "\nParm  6 at " 
-output/x (int) ($ebp+28)
-printf ":    " 
-output (char*) *(int*)($ebp+28)
-printf "\nParm  7 at " 
-output/x (int) ($ebp+32)
-printf ":    " 
-output (char*) *(int*)($ebp+32)
-printf "\nParm  8 at " 
-output/x (int) ($ebp+36)
-printf ":    " 
-output (char*) *(int*)($ebp+36)
-printf "\nParm  9 at " 
-output/x (int) ($ebp+40)
-printf ":    " 
-output (char*) *(int*)($ebp+40)
-printf "\nParm 10 at " 
-output/x (int) ($ebp+44)
-printf ":    " 
-output (char*) *(int*)($ebp+44)
-echo \n
-end
-document xxp
-Show the register contents and the first ten parameter
-words of the current frame.
-end
-define xp0
-x/12x *(int*)$esp
-p *(int*)$esp
-p (char*)*$esp
-end
-define xp1
-x/12x *(int*)($ebp+4)
-p *(int*)($ebp+4)
-p (char**)($ebp+4)
-end
-define xp2
-x/12x *(int*)($ebp+8)
-p *(int*)($ebp+8)
-p *(char**)($ebp+8)
-end
-define xp3
-x/12x *(int*)($ebp+12)
-p *(int*)($ebp+12)
-p (char**)($ebp+12)
-end
-define xp4
-x/12x *(int*)($ebp+16)
-p *(int*)($ebp+16)
-p (char**)($ebp+16)
-end
-document xp0
-Show the first parameter of current stack frame in various formats
-end
-document xp1
-Show the second parameter of current stack frame in various formats
-end
-document xp2
-Show the third parameter of current stack frame in various formats
-end
-document xp3
-Show the fourth parameter of current stack frame in various formats
-end
-document xp4
-Show the fifth parameter of current stack frame in various formats
-end
-define f0
-f 0
-xp
-end
-define f1
-f 1
-xp
-end
-define f2
-f 2
-xp
-end
-define f3
-f 3
-xp
-end
-define f4
-f 4
-xp
-end
-define f5
-f 5
-xp
-end
-document f0
-Select stack frame 0 and show assembler-level details
-end
-document f1
-Select stack frame 1 and show assembler-level details
-end
-document f2
-Select stack frame 2 and show assembler-level details
-end
-document f3
-Select stack frame 3 and show assembler-level details
-end
-document f4
-Select stack frame 4 and show assembler-level details
-end
-document f5
-Select stack frame 5 and show assembler-level details
-end
-document z
-Single step 1 instruction (over calls) and show next instruction.
-end
-document zs
-Single step 1 instruction (through calls) and show next instruction.
-end
-document xi
-List the next 10 instructions from the current IP value
-end
-document xs
-Show the last 12 words on stack in hex
-end
-document xb
-Show 12 words starting at current BP value in hex
-end
-define tr
-target remote /dev/cuaa1
-end
-document tr
-Attach to a remote kernel via /dev/cuaa0
-end
-set output-radix 16
-define pname
-p (char *)curproc->p_comm
-end 
-document pname
-Print the command name of the current process
-end
-define bpp
-set $bp = (struct buf *) $arg0
-    if $bp->b_dev
-      printf "  Buffer at 0x%x: dev 0x%x  data 0x%x  bcount 0x%x  blkno 0x%x resid 0x%x\n", \
-        $bp, \
-        $bp->b_dev->si_udev, \
-        $bp->b_data, \
-        $bp->b_bcount, \
-        $bp->b_blkno, \
-        $bp->b_resid
-    else
-      printf "  Buffer at 0x%x: dev (none) data 0x%x  bcount 0x%x  blkno 0x%x resid 0x%x\n", \
-        $bp, \
-        $bp->b_data, \
-        $bp->b_bcount, \
-        $bp->b_blkno, \
-        $bp->b_resid
-    end
-    printf "   flags 0x%x: ", $bp->b_flags
-      if $bp->b_flags & 0x10
-        printf "busy "
-      end
-      if $bp->b_flags & 0x40
-        printf "call "
-      end
-      if $bp->b_flags & 0x200
-        printf "done "
-      end
-      if $bp->b_flags & 0x800
-        printf "error "
-      end
-      if $bp->b_flags & 0x40000
-        printf "phys "
-      end
-      if $bp->b_flags & 0x100000
-        printf "read "
-      end
-    printf "\n"
-end
-define bpl
-set $bp = (struct buf *) $arg0
-printf "b_proc: "
-output $bp->b_proc
-printf "\nb_flags:      "
-output $bp->b_flags
-printf "\nb_qindex:     "
-output $bp->b_qindex
-printf "\nb_usecount:   "
-output $bp->b_usecount
-printf "\nb_error:      "
-output $bp->b_error
-printf "\nb_bufsize:    "
-output $bp->b_bufsize
-printf "\nb_bcount:     "
-output $bp->b_bcount
-printf "\nb_resid:      "
-output $bp->b_resid
-printf "\nb_dev:        "
-output $bp->b_dev
-printf "\nb_data:       "
-output $bp->b_data
-printf "\nb_kvasize:    "
-output $bp->b_kvasize
-printf "\nb_lblkno:     "
-output $bp->b_lblkno
-printf "\nb_blkno:      "
-output $bp->b_blkno
-printf "\nb_iodone:     "
-output $bp->b_iodone
-printf "\nb_vp: "
-output $bp->b_vp
-printf "\nb_dirtyoff:   "
-output $bp->b_dirtyoff
-printf "\nb_dirtyend:   "
-output $bp->b_dirtyend
-printf "\nb_generation: "
-output $bp->b_generation
-printf "\nb_rcred:      "
-output $bp->b_rcred
-printf "\nb_wcred:      "
-output $bp->b_wcred
-printf "\nb_validoff:   "
-output $bp->b_validoff
-printf "\nb_validend:   "
-output $bp->b_validend
-printf "\nb_pblkno:     "
-output $bp->b_pblkno
-printf "\nb_saveaddr:   "
-output $bp->b_saveaddr
-printf "\nb_savekva:    "
-output $bp->b_savekva
-printf "\nb_driver1:    "
-output $bp->b_driver1
-printf "\nb_driver2:    "
-output $bp->b_driver2
-printf "\nb_spc:        "
-output $bp->b_spc
-printf "\nb_npages:     "
-output $bp->b_npages
-printf "\n"
-end
-define bp
-bpp bp
-end
-define bpd
-    printf "Buffer data:\n%s", (char *) bp->b_data
-end
-document bpd
-Show the contents (char*) of bp->data in the current frame.
-end
-document bp
-Show information about the buffer header pointed to by the
-variable bp in the current frame.
-end
-document bpp
-Show summary information about the buffer header (struct bp) pointed
-at by the parameter.
-end
-document bpl
-Show detailled information about the buffer header (struct bp) pointed
-at by the parameter.
-end
-document bpl
-Show detailled information about the buffer header (struct bp) pointed
-at by the local variable bp.
-end
-define bx
-printf "\n b_vnbufs " 
-output/x bp->b_vnbufs
-printf "\n b_freelist " 
-output/x bp->b_freelist
-printf "\n b_act " 
-output/x bp->b_act
-printf "\n b_flags " 
-output/x bp->b_flags
-printf "\n b_qindex " 
-output/x bp->b_qindex
-printf "\n b_usecount " 
-output/x bp->b_usecount
-printf "\n b_error " 
-output/x bp->b_error
-printf "\n b_bufsize " 
-output/x bp->b_bufsize
-printf "\n b_bcount " 
-output/x bp->b_bcount
-printf "\n b_resid " 
-output/x bp->b_resid
-printf "\n b_dev " 
-output/x bp->b_dev
-printf "\n b_data " 
-output/x bp->b_data
-printf "\n b_kvasize " 
-output/x bp->b_kvasize
-printf "\n b_blkno " 
-output/x bp->b_blkno
-printf "\n b_iodone_chain " 
-output/x bp->b_iodone_chain
-printf "\n b_vp " 
-output/x bp->b_vp
-printf "\n b_dirtyoff " 
-output/x bp->b_dirtyoff
-printf "\n b_validoff " 
-output/x bp->b_validoff
-echo \n
-end
-define ddb
-set boothowto=0x80000000
-s
-end
-document ddb
-Switch back to ddb.
-end
-define ps
-    set $nproc = nprocs
-    set $aproc = allproc.lh_first
-    set $proc = allproc.lh_first
-    printf "  pid    proc    addr   uid  ppid  pgrp   flag stat comm         wchan\n"
-    while (--$nproc >= 0)
-        set $pptr = $proc.p_pptr
-        if ($pptr == 0)
-           set $pptr = $proc
-        end
-        if ($proc.p_stat)
-            printf "%5d %08x %08x %4d %5d %5d  %06x  %d  %-10s   ", \
-                   $proc.p_pid, $aproc, \
-                   $proc.p_addr, $proc.p_cred->p_ruid, $pptr->p_pid, \
-                   $proc.p_pgrp->pg_id, $proc.p_flag, $proc.p_stat, \
-                   &$proc.p_comm[0]
-            if ($proc.p_wchan)
-                if ($proc.p_wmesg)
-                    printf "%s ", $proc.p_wmesg
-                end
-                printf "%x", $proc.p_wchan
-            end
-            printf "\n"
-        end
-        set $aproc = $proc.p_list.le_next
-        if ($aproc == 0 && $nproc > 0)
-            set $aproc = zombproc
-        end
-        set $proc = $aproc
-    end
-end
-document ps
-"ps" -- when kernel debugging, type out a ps-like listing of active processes.
-end
-define pcb
-    set $nproc = nprocs
-    set $aproc = allproc.lh_first
-    set $proc = allproc.lh_first
-    while (--$nproc >= 0)
-        set $pptr = $proc.p_pptr
-        if ($proc->p_pid == $arg0)
-	   set $pcba = $pptr->p_addr->u_pcb
-	   printf "ip: %08x sp: %08x bp: %08x bx: %08x\n", $pcba->pcb_eip, $pcba->pcb_esp, $pcba->pcb_ebp, $pcba->pcb_ebx
-	   x/1i $pcba->pcb_eip
-	   set $nproc = 0
-        end
-        set $aproc = $proc.p_list.le_next
-        if ($aproc == 0 && $nproc > 0)
-            set $aproc = zombproc
-        end
-        set $proc = $aproc
-    end
-end
-document pcb
-Show some pcb contents of process whose pid is specified.
-end
-define btr
-set $frame = $arg0
-set $fno = 0
-while (*(int *) $frame > 0xc0000000)
-  set $myebp = *(int *) $frame
-  set $myeip = *(int *) ($frame + 4)
-  printf " frame %d at %p: ebp %8x, eip ", $fno, $frame, $myebp
-  x/1i $myeip
-  set $frame = $myebp
-  set $fno = $fno + 1
-end
-end
-document btr
-Show a backtrace from the ebp address specified.  This can be used to
-get a backtrace from any stack resident in memory.
-end
-define btp
-    set $nproc = nprocs
-    set $aproc = allproc.lh_first
-    set $proc = allproc.lh_first
-    while (--$nproc >= 0)
-        if ($proc->p_pid == $arg0)
-	   btr $proc->p_addr->u_pcb->pcb_ebp
-	   set $nproc = 0
-	else
-           set $aproc = $proc.p_list.le_next
-           if ($aproc == 0 && $nproc > 0)
-              set $aproc = zombproc
-           end
-           set $proc = $aproc
-        end
-   end
-end
-document btp
-Show a backtrace for the process whose pid is specified as a parameter.
-end
-define btpa
-    set $nproc = nprocs
-    set $aproc = allproc.lh_first
-    set $proc = allproc.lh_first
-    printf "  pid    proc    addr   uid  ppid  pgrp   flag stat comm         wchan\n"
-    while (--$nproc >= 0)
-        set $pptr = $proc.p_pptr
-        if ($pptr == 0)
-           set $pptr = $proc
-        end
-        if ($proc.p_stat)
-            printf "%5d %08x %08x %4d %5d %5d  %06x %d  %-10s   ", \
-                   $proc.p_pid, $aproc, \
-                   $proc.p_addr, $proc.p_cred->p_ruid, $pptr->p_pid, \
-                   $proc.p_pgrp->pg_id, $proc.p_flag, $proc.p_stat, \
-                   &$proc.p_comm[0]
-            if ($proc.p_wchan)
-                if ($proc.p_wmesg)
-                    printf "%s ", $proc.p_wmesg
-                end
-                printf "%x", $proc.p_wchan
-            end
-            printf "\n"
-	   if ($proc->p_flag & 4)
-	      btr $proc->p_addr->u_pcb->pcb_ebp
-	   else
-              echo (not loaded)\n
-	   end
-        end
-        set $aproc = $proc.p_list.le_next
-        if ($aproc == 0 && $nproc > 0)
-            set $aproc = zombproc
-        end
-        set $proc = $aproc
-    end
-end
-document btpa
-Show backtraces for all processes in the system.
-end
-define btpp
-  if ($myvectorproc->p_flag & 4)
-    btr $myvectorproc->p_addr->u_pcb->pcb_ebp
-  else
-    echo (not loaded)\n
-  end
-end
-document btpp
-Show a backtrace for the process previously selected with 'defproc'.
-end
-define defproc
-    set $nproc = nprocs
-    set $aproc = allproc.lh_first
-    set $proc = allproc.lh_first
-    while (--$nproc >= 0)
-        if ($proc->p_pid == $arg0)
-	   set $pptr = $proc.p_pptr
-           if ($pptr == 0)
-              set $pptr = $proc
-           end
-	   set $myvectorproc = $proc
-           if ($proc.p_stat)
-               printf "%5d %08x %08x %4d %5d %5d  %06x %d  %-10s   ", \
-                      $proc.p_pid, $aproc, \
-                      $proc.p_addr, $proc.p_cred->p_ruid, $pptr->p_pid, \
-                     $proc.p_pgrp->pg_id, $proc.p_flag, $proc.p_stat, \
-                     &$proc.p_comm[0]
-               if ($proc.p_wchan)
-                   if ($proc.p_wmesg)
-                       printf "%s ", $proc.p_wmesg
-                  end
-                  printf "%x", $proc.p_wchan
-               end
-               printf "\n"
-	      end
-	   btpp
-	   set $nproc = 0
-	else
-           set $proc = $proc.p_list.le_next
-        end
-   end
-end
-document defproc
-Specify a process for btpp and fr commands.
-end
-define fr
-set $fno = 0
-set $searching = 1
-if ($myvectorproc->p_flag & 4)
-  set $frame = $myvectorproc->p_addr->u_pcb->pcb_ebp
-  while (($searching == 1) && (*(int *) $frame > 0xc0000000))
-    set $myebp = *(int *) $frame
-    set $myeip = *(int *) ($frame + 4)
-    if ($fno == $arg0)
-      printf " frame %d at %p: ebp %8x, eip ", $fno, $frame, $myebp
-      x/1i $myeip
-      printf "Called from %8x, stack frame at %8x\n", *(int *) ($myebp+4), *(int *) $myebp
-      printf "last 20 local variables:\n"
-      x/20x ($myebp-80)
-      printf "call parameters:\n"
-      x/8x ($myebp+8)
-      set $searching = 0
-    else
-      set $frame = $myebp
-      set $fno = $fno + 1
-    end
-  end
-  if ($searching == 1)
-    echo frame not found\n
-  end
-else
-  printf "process %d is not loaded in memory\n", $myvectorproc->p_pid
-end
-end
-document fr
-Show the frame of the stack of the process previously selected with 'defproc'.
-end
-set height 70
-set width 120
-define vdev
-if (vp->v_type == VBLK)
-  p *vp->v_un.vu_spec.vu_specinfo
-  printf "numoutput: %d\n", vp->v_numoutput
-else
-  echo "Not a block device"
-end
-end
-document vdev
-Show some information of the vnode pointed to by the local variable vp.
-end
-define y
-echo Check your .gdbinit, it contains a y command\n
-end
-define kldstat
-   set $file = files.tqh_first
-   printf "Id Refs Address    Size     Name\n"
-   while ($file != 0)
-     printf "%2d %4d 0x%8x %8x %s\n",   \
-	$file->id, 			\
-	$file->refs,			\
-	$file->address,			\
-	$file->size,			\
-	$file->filename
-     set $file = $file->link.tqe_next
-   end
-end
-document kldstat
-Equivalent of the kldstat(9) command, without options.
-end
-define msgbuf
-printf "%s", msgbufp->msg_ptr
-end
-document msgbuf
-Print the system message buffer (dmesg).  This can take a long time due to the time it takes to transmit the data across a serial line.
-end
diff --git a/sys/modules/vinum/.gdbinit.serial b/sys/modules/vinum/.gdbinit.serial
deleted file mode 100644
index d302f8a..0000000
--- a/sys/modules/vinum/.gdbinit.serial
+++ /dev/null
@@ -1,5 +0,0 @@
-source .gdbinit.kernel
-source .gdbinit.vinum.paths
-source .gdbinit.vinum
-tr
-asf
diff --git a/sys/modules/vinum/.gdbinit.vinum b/sys/modules/vinum/.gdbinit.vinum
deleted file mode 100644
index d494be3..0000000
--- a/sys/modules/vinum/.gdbinit.vinum
+++ /dev/null
@@ -1,299 +0,0 @@
-define rq
-rqq rq
-end
-document rq
-Show information about the request pointed to by the variable rq in the current frame.
-end
-define rqq
-set $rq = (struct request *) $arg0
-printf "Request: \n" 
-output/x *$rq
-printf "\n"
-bpp $rq->bp
-set $rqg = $rq->rqg
-while ($rqg != 0)
-  printf "\nRequest group at %x:\n", $rqg
-  output/x *$rqg
-  printf "\n"
-  set $rqno = 0
-  while ($rqno < $rqg->count)
-    printf "rqg->rqe [%d]: ", $rqno
-    rrqe &$rqg->rqe[$rqno]
-    set $rqno = $rqno + 1
-    end
-  set $rqg = $rqg->next
-  end
-end
-document rqq
-Show information about the request (struct rq) pointed at by the parameter
-end
-define rqe
-rrqe rqe
-end
-define rrqe
-set $rqe = (struct rqelement *) $arg0
-    printf "sdoffset 0x%x, useroffset 0x%x, dataoffset 0x%x, datalen 0x%x, groupoffset 0x%x, grouplen 0x%x, buflen 0x%x\n", \
-      $rqe->sdoffset, \
-      $rqe->useroffset, \
-      $rqe->dataoffset, \
-      $rqe->datalen, \
-      $rqe->groupoffset, \
-      $rqe->grouplen, \
-      $rqe->buflen
-    printf "  Flags 0x%x,  Subdisk %d  Drive %d\n", \
-      $rqe->flags, \
-      $rqe->sdno, \
-      $rqe->driveno
-    bpp &$rqe->b
-end
-document rqe
-Show information about the request element pointed to by the variable rqe in the current frame.
-end
-document rrqe
-Show information about the request element (struct rqe) pointed at by the parameter.
-end
-define rqq0
-printf "rq->prq [0].rqe[0].sdno: " 
-output/x rq->prq[0].rqe[0].sdno
-printf "\nBuffer: device: " 
-output/x rq->prq[0].rqe[0].b.b_dev
-printf " data: " 
-output/x rq->prq[0].rqe[0].b.b_data
-printf " length: " 
-output/x rq->prq[0].rqe[0].b.b_bcount
-printf " drive offset: " 
-output/x rq->prq[0].rqe[0].b.b_blkno
-printf " subdisk offset: " 
-output/x rq->prq[0].rqe[0].sdoffset
-printf "\nFlags: " 
-if (rq->prq[0].rqe[0].b.b_flags & 0x10)
-printf "busy "
-end
-if (rq->prq[0].rqe[0].b.b_flags & 0x200)
-printf "done "
-end
-if (rq->prq[0].rqe[0].b.b_flags & 0x800)
-printf "error "
-end
-if (rq->prq[0].rqe[0].b.b_flags & 0x100000)
-printf "read "
-end
-output/x rq->prq[0].rqe[0].b.b_flags
-printf "\nrq->prq [0].rqe[1].sdno: " 
-output/x rq->prq[0].rqe[1].sdno
-printf "\nBuffer: device: " 
-output/x rq->prq[0].rqe[1].b.b_dev
-printf " data: " 
-output/x rq->prq[0].rqe[1].b.b_data
-printf " length: " 
-output/x rq->prq[0].rqe[1].b.b_bcount
-printf " drive offset: " 
-output/x rq->prq[0].rqe[1].b.b_blkno
-printf " subdisk offset: " 
-output/x rq->prq[0].rqe[1].sdoffset
-printf "\nFlags: " 
-output/x rq->prq[0].rqe[1].b.b_flags
-echo \n
-end
-define rqq1
-printf "\nrq->prq [1].rqe[0].sdno: " 
-output/x rq->prq[1].rqe[0].sdno
-printf "\nBuffer: device: " 
-output/x rq->prq[1].rqe[0].b.b_dev
-printf " data: " 
-output/x rq->prq[1].rqe[0].b.b_data
-printf " length: " 
-output/x rq->prq[1].rqe[0].b.b_bcount
-printf " drive offset: " 
-output/x rq->prq[1].rqe[0].b.b_blkno
-printf " subdisk offset: " 
-output/x rq->prq[1].rqe[0].sdoffset
-printf "\nFlags: " 
-output/x rq->prq[1].rqe[0].b.b_flags
-printf "\nrq->prq [1].rqe[1].sdno: " 
-output/x rq->prq[1].rqe[1].sdno
-printf "\nBuffer: device: " 
-output/x rq->prq[1].rqe[1].b.b_dev
-printf " data: 0x%x  length 0x%x  drive offset 0x%x  sd offset 0x%x\n" rq->prq[1].rqe[1].b.b_data,
- rq->prq[1].rqe[1].b.b_bcount,
- rq->prq[1].rqe[1].b.b_blkno,
- rq->prq[1].rqe[1].sdoffset
-printf "\nFlags: " 
-output/x rq->prq[1].rqe[1].b.b_flags
-echo \n
-end
-define xy
-bpp
-echo stripeoffset
-p stripeoffset
-echo stripebase
-p stripebase
-echo sdno
-p sdno
-echo sdoffset
-p sdoffset
-echo rqe->sectors
-p rqe->sectors
-echo rqe->sdoffset
-p rqe->sdoffset
-end
-# kernel equivalent of 'info -V'
-define rqi
-   set $rqipe = rqip
-   set $rqip = $rqipe + 1
-   set $rqend  = rqinfo + 128
-   if ($rqip == $rqend)
-      set $rqip = rqinfo
-   end
-   set $done = 0
-   while ($done == 0)
-     if ($rqip->bp != 0)
-        printf "%X:\t%d.%06d\tUBP: %x\t", $rqip, $rqip->timestamp.tv_sec, $rqip->timestamp.tv_usec, $rqip->bp
-        p $rqip->type
-	printf " user  "
-        bpp $rqip->bp
-        if ($rqip->type < loginfo_rqe)
-	   printf " copied"
-           bpp &$rqip->info
-        else 
-           rrqe &$rqip->info
-        end
-      end
-      set $rqip = $rqip + 1
-      if ($rqip == $rqipe)
-         set $done = 1
-      end
-      if ($rqip == $rqend)
-         set $rqip = rqinfo
-      end
-   end
-end
-define rqinfo
-   set $rqipe = rqip
-   set $rqip = $rqipe + 1
-   set $rqend  = rqinfo + 128
-   if ($rqip == $rqend)
-      set $rqip = rqinfo
-   end
-   set $done = 0
-   printf "\nTime\t\t\t Event\t\t     Buf\tDev\t  Offset\tBytes\tSD\tSDoff\tDoffset\tGoffset\n\n"
-   while ($done == 0)
-     if ($rqip->bp != 0)
-        printf "%d.%06d\t", $rqip->timestamp.tv_sec, $rqip->timestamp.tv_usec
-	if ($rqip->type ==  loginfo_user_bp)
-	  if ($rqip->info.b.b_flags & 0x00100000)
-	    printf "1VS Read"
-	  else
-	    printf "1VS Write"
-	  end
-	printf "\t%p\t%d.%d\t0x%-9x\t%ld\n", $rqip->bp, $rqip->devmajor, $rqip->devminor & 0xff, $rqip->info.b.b_blkno, $rqip->info.b.b_bcount
-	end
-	
-      if ($rqip->type == loginfo_user_bpl)
-	  if ($rqip->info.b.b_flags & 0x00100000)
-	    printf "2LR Read"
-	  else
-	    printf "2LR Write"
-	  end
-	printf "\t%p\t%d.%d\t0x%-9x\t%ld\n", $rqip->bp, $rqip->devmajor, $rqip->devminor & 0xff, $rqip->info.b.b_blkno, $rqip->info.b.b_bcount
-	end
-	 
-      if ($rqip->type == loginfo_rqe)
-	  if ($rqip->info.b.b_flags & 0x00100000)
-	    printf "3RQ Read"
-	  else
-	    printf "3RQ Write"
-	  end
-	printf "\t%p\t%d.%d\t0x%-9x\t%ld\t%d\t%x\t%x\t%x\n", $rqip->bp, $rqip->devmajor, $rqip->devminor & 0xff, $rqip->info.rqe.b.b_blkno, $rqip->info.rqe.b.b_bcount, $rqip->info.rqe.sdno, $rqip->info.rqe.sdoffset, $rqip->info.rqe.dataoffset, $rqip->info.rqe.groupoffset
-	end
-	
-      if ($rqip->type == loginfo_iodone)
-	  if ($rqip->info.b.b_flags & 0x00100000)
-	    printf "4DN Read"
-	  else
-	    printf "4DN Write"
-	  end
-	printf "\t%p\t%d.%d\t0x%-9x\t%ld\t%d\t%x\t%x\t%x\n", $rqip->bp, $rqip->devmajor, $rqip->devminor & 0xff, $rqip->info.rqe.b.b_blkno, $rqip->info.rqe.b.b_bcount, $rqip->info.rqe.sdno, $rqip->info.rqe.sdoffset, $rqip->info.rqe.dataoffset, $rqip->info.rqe.groupoffset
-	end
-	
-      if ($rqip->type == loginfo_raid5_data)
-	  if ($rqip->info.b.b_flags & 0x00100000)
-	    printf "5RD Read"
-	  else
-	    printf "5RD Write"
-	  end
-	printf "\t%p\t%d.%d\t0x%-9x\t%ld\t%d\t%x\t%x\t%x\n", $rqip->bp, $rqip->devmajor, $rqip->devminor & 0xff, $rqip->info.rqe.b.b_blkno, $rqip->info.rqe.b.b_bcount, $rqip->info.rqe.sdno, $rqip->info.rqe.sdoffset, $rqip->info.rqe.dataoffset, $rqip->info.rqe.groupoffset
-	end
-	
-      if ($rqip->type == loginfo_raid5_parity)
-	  if ($rqip->info.b.b_flags & 0x00100000)
-	    printf "6RP Read"
-	  else
-	    printf "6RP Write"
-	  end
-	printf "\t%p\t%d.%d\t0x%-9x\t%ld\t%d\t%x\t%x\t%x\n", $rqip->bp, $rqip->devmajor, $rqip->devminor & 0xff, $rqip->info.rqe.b.b_blkno, $rqip->info.rqe.b.b_bcount, $rqip->info.rqe.sdno, $rqip->info.rqe.sdoffset, $rqip->info.rqe.dataoffset, $rqip->info.rqe.groupoffset
-	end
-
-      if ($rqip->type == loginfo_sdio)
-	  if ($rqip->info.b.b_flags & 0x00100000)
-	    printf "7VS Read"
-	  else
-	    printf "7VS Write"
-	  end
-	printf "\t%p\t\t  0x%-9x\t%ld\t%d\n", $rqip->bp, $rqip->info.b.b_blkno, $rqip->info.b.b_bcount, $rqip->devminor & 0xff
-	end
-
-      if ($rqip->type == loginfo_sdiol)
-	  if ($rqip->info.b.b_flags & 0x00100000)
-	    printf "8LR Read"
-	  else
-	    printf "8LR Write"
-	  end
-	printf "\t%p\t%d.%d\t0x%-9x\t%ld\n", $rqip->bp, $rqip->devmajor, $rqip->devminor & 0xff, $rqip->info.b.b_blkno, $rqip->info.b.b_bcount
-	end
-	 
-      if ($rqip->type == loginfo_lockwait)
-	printf "Lockwait  %p\t%d\t  0x%x\n", $rqip->bp, $rqip->info.lockinfo.plexno, $rqip->info.lockinfo.stripe
-	end
-
-      if ($rqip->type == loginfo_lock)
-	printf "Lock      \t%p\t%d\t  0x%x\n", $rqip->bp, $rqip->info.lockinfo.plexno, $rqip->info.lockinfo.stripe
-	end
-
-      if ($rqip->type == loginfo_unlock)
-	printf "Unlock    \t%p\t%d\t  0x%x\n", $rqip->bp, $rqip->info.lockinfo.plexno, $rqip->info.lockinfo.stripe
-	end
-
-	if ($rqip->type == loginfo_sdiodone)
-	  if ($rqip->info.b.b_flags & 0x00100000)
-	    printf "9DN Read"
-	  else
-	    printf "9DN Write"
-	  end
-	printf "\t%p\t\t  0x%-9x\t%ld\t%d\n", $rqip->bp, $rqip->info.b.b_blkno, $rqip->info.b.b_bcount, $rqip->devminor
-	end
-
-	end
-      set $rqip = $rqip + 1
-      if ($rqip == $rqipe)
-         set $done = 1
-      end
-      if ($rqip == $rqend)
-         set $rqip = rqinfo
-      end
-   end
-end 
-document rqinfo
-Show the Vinum request log buffer, like 'vinum info -V'
-end
-define meminfo
-printf "Block\tSequence\t  size\t  address\t  line\t\tfile\n"
-set $i = 0
-while $i < malloccount
-  printf "%6d\t%6d\t\t%6d\t0x%08x\t%6d\t\t%s\n", $i, malloced [$i].seq, malloced[$i].size, malloced[$i].address, malloced[$i].line, &malloced[$i].file
-  set $i = $i + 1
-end
-end
-document meminfo
-Equivalent of 'vinum info -v' command
-end
diff --git a/sys/modules/vinum/.gdbinit.vinum.paths b/sys/modules/vinum/.gdbinit.vinum.paths
deleted file mode 100644
index 104ffec..0000000
--- a/sys/modules/vinum/.gdbinit.vinum.paths
+++ /dev/null
@@ -1,19 +0,0 @@
-dir /usr/src/sys/modules/vinum
-dir /usr/src/sys/i386/conf
-dir /usr/src/sys
-define asf
-   set $file = linker_files.tqh_first
-   set $found = 0
-   while ($found == 0)
-     if (*$file->filename == 'v')
-	set $found = 1
-     else
-       set $file = $file->link.tqe_next
-     end
-   end
-   shell /usr/bin/objdump --section-headers /modules/vinum.ko | grep ' .text' | awk '{print "add-symbol-file /modules/vinum.ko \$file->address+0x" $4}' > .asf
-   source .asf
-end
-document asf
-Find the load address of Vinum in the kernel and add the symbols at this address
-end