Move usb to a graveyard location under sys/legacy/dev, it is intended that the

new USB2 stack will fully replace this for 8.0.

Remove kernel modules, a subsequent commit will update conf/files. Unhook
usbdevs from the build.

1 files changed, 1036 insertions, 0 deletions

diff --git a/sys/legacy/dev/usb/uchcom.c b/sys/legacy/dev/usb/uchcom.c
new file mode 100644
index 0000000..85b2629
--- /dev/null
+++ b/sys/legacy/dev/usb/uchcom.c
@@ -0,0 +1,1036 @@
+/*	$NetBSD: uchcom.c,v 1.1 2007/09/03 17:57:37 tshiozak Exp $	*/
+
+/*-
+ * Copyright (c) 2007, Takanori Watanabe
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/*
+ * Copyright (c) 2007 The NetBSD Foundation, Inc.
+ * All rights reserved.
+ *
+ * This code is derived from software contributed to The NetBSD Foundation
+ * by Takuya SHIOZAKI (tshiozak@netbsd.org).
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *        This product includes software developed by the NetBSD
+ *        Foundation, Inc. and its contributors.
+ * 4. Neither the name of The NetBSD Foundation nor the names of its
+ *    contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
+ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
+ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <sys/cdefs.h>
+__FBSDID("$FreeBSD$");
+
+/*
+ * driver for WinChipHead CH341/340, the worst USB-serial chip in the world.
+ */
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/kernel.h>
+#include <sys/malloc.h>
+#include <sys/module.h>
+#include <sys/conf.h>
+#include <sys/tty.h>
+#include <sys/file.h>
+#include <sys/select.h>
+#include <sys/proc.h>
+#include <sys/bus.h>
+#include <sys/poll.h>
+
+#include <dev/usb/usb.h>
+#include <dev/usb/usbcdc.h>
+
+#include <dev/usb/usbdi.h>
+#include <dev/usb/usbdi_util.h>
+#include <dev/usb/usb_quirks.h>
+
+#include <dev/usb/ucomvar.h>
+#include "usbdevs.h"
+
+#ifdef UCHCOM_DEBUG
+#define DPRINTFN(n, x)  if (uchcomdebug > (n)) logprintf x
+int	uchcomdebug = 0;
+#else
+#define DPRINTFN(n, x)
+#endif
+#define DPRINTF(x) DPRINTFN(0, x)
+
+#define	UCHCOM_IFACE_INDEX	0
+#define	UCHCOM_CONFIG_INDEX	0
+
+#define UCHCOM_REV_CH340	0x0250
+#define UCHCOM_INPUT_BUF_SIZE	8
+
+#define UCHCOM_REQ_GET_VERSION	0x5F
+#define UCHCOM_REQ_READ_REG	0x95
+#define UCHCOM_REQ_WRITE_REG	0x9A
+#define UCHCOM_REQ_RESET	0xA1
+#define UCHCOM_REQ_SET_DTRRTS	0xA4
+
+#define UCHCOM_REG_STAT1	0x06
+#define UCHCOM_REG_STAT2	0x07
+#define UCHCOM_REG_BPS_PRE	0x12
+#define UCHCOM_REG_BPS_DIV	0x13
+#define UCHCOM_REG_BPS_MOD	0x14
+#define UCHCOM_REG_BPS_PAD	0x0F
+#define UCHCOM_REG_BREAK1	0x05
+#define UCHCOM_REG_BREAK2	0x18
+#define UCHCOM_REG_LCR1		0x18
+#define UCHCOM_REG_LCR2		0x25
+
+#define UCHCOM_VER_20		0x20
+
+#define UCHCOM_BASE_UNKNOWN	0
+#define UCHCOM_BPS_MOD_BASE	20000000
+#define UCHCOM_BPS_MOD_BASE_OFS	1100
+
+#define UCHCOM_DTR_MASK		0x20
+#define UCHCOM_RTS_MASK		0x40
+
+#define UCHCOM_BRK1_MASK	0x01
+#define UCHCOM_BRK2_MASK	0x40
+
+#define UCHCOM_LCR1_MASK	0xAF
+#define UCHCOM_LCR2_MASK	0x07
+#define UCHCOM_LCR1_PARENB	0x80
+#define UCHCOM_LCR2_PAREVEN	0x07
+#define UCHCOM_LCR2_PARODD	0x06
+#define UCHCOM_LCR2_PARMARK	0x05
+#define UCHCOM_LCR2_PARSPACE	0x04
+
+#define UCHCOM_INTR_STAT1	0x02
+#define UCHCOM_INTR_STAT2	0x03
+#define UCHCOM_INTR_LEAST	4
+
+#define UCHCOMIBUFSIZE 256
+#define UCHCOMOBUFSIZE 256
+
+struct uchcom_softc
+{
+	struct ucom_softc	sc_ucom;
+
+	/* */
+	int			sc_intr_endpoint;
+	int			sc_intr_size;
+	usbd_pipe_handle	sc_intr_pipe;
+	u_char			*sc_intr_buf;
+	/* */
+	uint8_t			sc_version;
+	int			sc_dtr;
+	int			sc_rts;
+	u_char			sc_lsr;
+	u_char			sc_msr;
+	int			sc_lcr1;
+	int			sc_lcr2;
+};
+
+struct uchcom_endpoints
+{
+	int		ep_bulkin;
+	int		ep_bulkout;
+	int		ep_intr;
+	int		ep_intr_size;
+};
+
+struct uchcom_divider
+{
+	uint8_t		dv_prescaler;
+	uint8_t		dv_div;
+	uint8_t		dv_mod;
+};
+
+struct uchcom_divider_record
+{
+	uint32_t		dvr_high;
+	uint32_t		dvr_low;
+	uint32_t		dvr_base_clock;
+	struct uchcom_divider	dvr_divider;
+};
+
+static const struct uchcom_divider_record dividers[] =
+{
+	{  307200, 307200, UCHCOM_BASE_UNKNOWN, { 7, 0xD9, 0 } },
+	{  921600, 921600, UCHCOM_BASE_UNKNOWN, { 7, 0xF3, 0 } },
+	{ 2999999,  23530,             6000000, { 3,    0, 0 } },
+	{   23529,   2942,              750000, { 2,    0, 0 } },
+	{    2941,    368,               93750, { 1,    0, 0 } },
+	{     367,      1,               11719, { 0,    0, 0 } },
+};
+#define NUM_DIVIDERS	(sizeof (dividers) / sizeof (dividers[0]))
+
+static const struct usb_devno uchcom_devs[] = {
+	{ USB_VENDOR_WCH, USB_PRODUCT_WCH_CH341SER },
+};
+#define uchcom_lookup(v, p)	usb_lookup(uchcom_devs, v, p)
+
+static void	uchcom_get_status(void *, int, u_char *, u_char *);
+static void	uchcom_set(void *, int, int, int);
+static int	uchcom_param(void *, int, struct termios *);
+static int	uchcom_open(void *, int);
+static void	uchcom_close(void *, int);
+static void	uchcom_intr(usbd_xfer_handle, usbd_private_handle,
+			    usbd_status);
+
+static int	set_config(device_t );
+static int	find_ifaces(struct uchcom_softc *, usbd_interface_handle *);
+static int	find_endpoints(struct uchcom_softc *,
+			       struct uchcom_endpoints *);
+static void	close_intr_pipe(struct uchcom_softc *);
+
+static int uchcom_match(device_t );
+static int uchcom_attach(device_t );
+static int uchcom_detach(device_t );
+
+struct	ucom_callback uchcom_callback = {
+	.ucom_get_status	= uchcom_get_status,
+	.ucom_set		= uchcom_set,
+	.ucom_param		= uchcom_param,
+	.ucom_ioctl		= NULL,
+	.ucom_open		= uchcom_open,
+	.ucom_close		= uchcom_close,
+	.ucom_read		= NULL,
+	.ucom_write		= NULL,
+};
+
+
+
+
+/* ----------------------------------------------------------------------
+ * driver entry points
+ */
+
+static int uchcom_match(device_t self)
+{
+	struct usb_attach_arg *uaa = device_get_ivars(self);
+
+	return (uchcom_lookup(uaa->vendor, uaa->product) != NULL ?
+		UMATCH_VENDOR_PRODUCT : UMATCH_NONE);
+}
+
+static int uchcom_attach(device_t self)
+{
+	struct uchcom_softc *sc = device_get_softc(self);
+	struct usb_attach_arg *uaa = device_get_ivars(self);
+	usbd_device_handle dev = uaa->device;
+
+	struct uchcom_endpoints endpoints;
+	struct ucom_softc *ucom = &sc->sc_ucom;
+
+	ucom->sc_dev = self;
+	ucom->sc_udev = dev;
+
+	ucom->sc_dying = 0;
+	sc->sc_dtr = sc->sc_rts = -1;
+	sc->sc_lsr = sc->sc_msr = 0;
+
+	DPRINTF(("\n\nuchcom attach: sc=%p\n", sc));
+
+	if (set_config(self))
+		goto failed;
+
+	switch (uaa->release) {
+	case UCHCOM_REV_CH340:
+		device_printf(self, "CH340 detected\n");
+		break;
+	default:
+		device_printf(self, "CH341 detected\n");
+		break;
+	}
+
+	if (find_ifaces(sc, &ucom->sc_iface))
+		goto failed;
+
+	if (find_endpoints(sc, &endpoints))
+		goto failed;
+
+	sc->sc_intr_endpoint = endpoints.ep_intr;
+	sc->sc_intr_size = endpoints.ep_intr_size;
+
+	/* setup ucom layer */
+	ucom->sc_portno = UCOM_UNK_PORTNO;
+	ucom->sc_bulkin_no = endpoints.ep_bulkin;
+	ucom->sc_bulkout_no = endpoints.ep_bulkout;
+	ucom->sc_ibufsize = UCHCOMIBUFSIZE;
+	ucom->sc_obufsize = UCHCOMOBUFSIZE;
+	ucom->sc_ibufsizepad = UCHCOMIBUFSIZE;
+	ucom->sc_opkthdrlen = 0;
+	ucom->sc_parent = sc;
+
+	ucom->sc_callback = &uchcom_callback;
+
+	ucom_attach(&sc->sc_ucom);
+	
+	return 0;
+
+failed:
+	ucom->sc_dying = 1;
+	return ENXIO;
+}
+
+static int uchcom_detach(device_t self)
+{
+	struct uchcom_softc *sc = device_get_softc(self);
+	struct ucom_softc *ucom = &sc->sc_ucom ;
+	int rv = 0;
+
+	DPRINTF(("uchcom_detach: sc=%p flags=%d\n", sc, flags));
+
+	close_intr_pipe(sc);
+
+	ucom->sc_dying = 1;
+
+	rv = ucom_detach(ucom);
+
+	return rv;
+}
+static int
+set_config(device_t dev)
+{
+	struct uchcom_softc *sc = device_get_softc(dev);
+	struct ucom_softc *ucom = &sc->sc_ucom;
+	usbd_status err;
+	
+	err = usbd_set_config_index(ucom->sc_udev, UCHCOM_CONFIG_INDEX, 1);
+	if (err) {
+		device_printf(dev, "failed to set configuration: %s\n",
+			      usbd_errstr(err));
+		return -1;
+	}
+
+	return 0;
+}
+
+static int
+find_ifaces(struct uchcom_softc *sc, usbd_interface_handle *riface)
+{
+	usbd_status err;
+	struct ucom_softc *ucom = &sc->sc_ucom;
+
+	err = usbd_device2interface_handle(ucom->sc_udev, UCHCOM_IFACE_INDEX,
+					   riface);
+	if (err) {
+		device_printf(ucom->sc_dev, "failed to get interface: %s\n",
+			      usbd_errstr(err));
+		return -1;
+	}
+
+	return 0;
+}
+
+static int
+find_endpoints(struct uchcom_softc *sc, struct uchcom_endpoints *endpoints)
+{
+	struct ucom_softc *ucom= &sc->sc_ucom;
+	int i, bin=-1, bout=-1, intr=-1, isize=0;
+	usb_interface_descriptor_t *id;
+	usb_endpoint_descriptor_t *ed;
+
+	id = usbd_get_interface_descriptor(ucom->sc_iface);
+
+	for (i = 0; i < id->bNumEndpoints; i++) {
+		ed = usbd_interface2endpoint_descriptor(ucom->sc_iface, i);
+		if (ed == NULL) {
+			device_printf(ucom->sc_dev, "no endpoint descriptor for %d\n", i);
+			return -1;
+		}
+
+		if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
+		    UE_GET_XFERTYPE(ed->bmAttributes) == UE_INTERRUPT) {
+			intr = ed->bEndpointAddress;
+			isize = UGETW(ed->wMaxPacketSize);
+		} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_IN &&
+			   UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
+			bin = ed->bEndpointAddress;
+		} else if (UE_GET_DIR(ed->bEndpointAddress) == UE_DIR_OUT &&
+			   UE_GET_XFERTYPE(ed->bmAttributes) == UE_BULK) {
+			bout = ed->bEndpointAddress;
+		}
+	}
+
+	if (intr == -1 || bin == -1 || bout == -1) {
+		if (intr == -1) {
+			device_printf(ucom->sc_dev, "no interrupt end point\n");
+		}
+		if (bin == -1) {
+			device_printf(ucom->sc_dev, "no data bulk in end point\n");
+
+		}
+		if (bout == -1) {
+			device_printf(ucom->sc_dev, "no data bulk out end point\n");
+		}
+		return -1;
+	}
+	if (isize < UCHCOM_INTR_LEAST) {
+		device_printf(ucom->sc_dev, "intr pipe is too short");
+		return -1;
+	}
+
+	DPRINTF(("%s: bulkin=%d, bulkout=%d, intr=%d, isize=%d\n",
+		 USBDEVNAME(sc->sc_dev), bin, bout, intr, isize));
+
+	endpoints->ep_intr = intr;
+	endpoints->ep_intr_size = isize;
+	endpoints->ep_bulkin = bin;
+	endpoints->ep_bulkout = bout;
+
+	return 0;
+}
+
+
+/* ----------------------------------------------------------------------
+ * low level i/o
+ */
+
+static __inline usbd_status
+generic_control_out(struct uchcom_softc *sc, uint8_t reqno,
+		    uint16_t value, uint16_t index)
+{
+	usb_device_request_t req;
+
+	req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
+	req.bRequest = reqno;
+	USETW(req.wValue, value);
+	USETW(req.wIndex, index);
+	USETW(req.wLength, 0);
+
+	return usbd_do_request(sc->sc_ucom.sc_udev, &req, 0);
+}
+
+static __inline usbd_status
+generic_control_in(struct uchcom_softc *sc, uint8_t reqno,
+		   uint16_t value, uint16_t index, void *buf, int buflen,
+		   int *actlen)
+{
+	usb_device_request_t req;
+
+	req.bmRequestType = UT_READ_VENDOR_DEVICE;
+	req.bRequest = reqno;
+	USETW(req.wValue, value);
+	USETW(req.wIndex, index);
+	USETW(req.wLength, (uint16_t)buflen);
+
+	return usbd_do_request_flags(sc->sc_ucom.sc_udev, &req, buf,
+				     USBD_SHORT_XFER_OK, actlen,
+				     USBD_DEFAULT_TIMEOUT);
+}
+
+static __inline usbd_status
+write_reg(struct uchcom_softc *sc,
+	  uint8_t reg1, uint8_t val1, uint8_t reg2, uint8_t val2)
+{
+	DPRINTF(("uchcom: write reg 0x%02X<-0x%02X, 0x%02X<-0x%02X\n",
+		 (unsigned)reg1, (unsigned)val1,
+		 (unsigned)reg2, (unsigned)val2));
+	return generic_control_out(
+		sc, UCHCOM_REQ_WRITE_REG,
+		reg1|((uint16_t)reg2<<8), val1|((uint16_t)val2<<8));
+}
+
+static __inline usbd_status
+read_reg(struct uchcom_softc *sc,
+	 uint8_t reg1, uint8_t *rval1, uint8_t reg2, uint8_t *rval2)
+{
+	uint8_t buf[UCHCOM_INPUT_BUF_SIZE];
+	usbd_status err;
+	int actin;
+
+	err = generic_control_in(
+		sc, UCHCOM_REQ_READ_REG,
+		reg1|((uint16_t)reg2<<8), 0, buf, sizeof buf, &actin);
+	if (err)
+		return err;
+
+	DPRINTF(("uchcom: read reg 0x%02X->0x%02X, 0x%02X->0x%02X\n",
+		 (unsigned)reg1, (unsigned)buf[0],
+		 (unsigned)reg2, (unsigned)buf[1]));
+
+	if (rval1) *rval1 = buf[0];
+	if (rval2) *rval2 = buf[1];
+
+	return USBD_NORMAL_COMPLETION;
+}
+
+static __inline usbd_status
+get_version(struct uchcom_softc *sc, uint8_t *rver)
+{
+	uint8_t buf[UCHCOM_INPUT_BUF_SIZE];
+	usbd_status err;
+	int actin;
+
+	err = generic_control_in(
+		sc, UCHCOM_REQ_GET_VERSION, 0, 0, buf, sizeof buf, &actin);
+	if (err)
+		return err;
+
+	if (rver) *rver = buf[0];
+
+	return USBD_NORMAL_COMPLETION;
+}
+
+static __inline usbd_status
+get_status(struct uchcom_softc *sc, uint8_t *rval)
+{
+	return read_reg(sc, UCHCOM_REG_STAT1, rval, UCHCOM_REG_STAT2, NULL);
+}
+
+static __inline usbd_status
+set_dtrrts_10(struct uchcom_softc *sc, uint8_t val)
+{
+	return write_reg(sc, UCHCOM_REG_STAT1, val, UCHCOM_REG_STAT1, val);
+}
+
+static __inline usbd_status
+set_dtrrts_20(struct uchcom_softc *sc, uint8_t val)
+{
+	return generic_control_out(sc, UCHCOM_REQ_SET_DTRRTS, val, 0);
+}
+
+
+/* ----------------------------------------------------------------------
+ * middle layer
+ */
+
+static int
+update_version(struct uchcom_softc *sc)
+{
+	usbd_status err;
+
+	err = get_version(sc, &sc->sc_version);
+	if (err) {
+		device_printf(sc->sc_ucom.sc_dev, "cannot get version: %s\n",
+			      usbd_errstr(err));
+		return EIO;
+	}
+
+	return 0;
+}
+
+static void
+convert_status(struct uchcom_softc *sc, uint8_t cur)
+{
+	sc->sc_dtr = !(cur & UCHCOM_DTR_MASK);
+	sc->sc_rts = !(cur & UCHCOM_RTS_MASK);
+
+	cur = ~cur & 0x0F;
+	sc->sc_msr = (cur << 4) | ((sc->sc_msr >> 4) ^ cur);
+}
+
+static int
+update_status(struct uchcom_softc *sc)
+{
+	usbd_status err;
+	uint8_t cur;
+
+	err = get_status(sc, &cur);
+	if (err) {
+		device_printf(sc->sc_ucom.sc_dev, 
+			      "cannot update status: %s\n",
+			      usbd_errstr(err));
+		return EIO;
+	}
+	convert_status(sc, cur);
+
+	return 0;
+}
+
+
+static int
+set_dtrrts(struct uchcom_softc *sc, int dtr, int rts)
+{
+	usbd_status err;
+	uint8_t val = 0;
+
+	if (dtr) val |= UCHCOM_DTR_MASK;
+	if (rts) val |= UCHCOM_RTS_MASK;
+
+	if (sc->sc_version < UCHCOM_VER_20)
+		err = set_dtrrts_10(sc, ~val);
+	else
+		err = set_dtrrts_20(sc, ~val);
+
+	if (err) {
+		device_printf(sc->sc_ucom.sc_dev, "cannot set DTR/RTS: %s\n",
+			      usbd_errstr(err));
+		return EIO;
+	}
+
+	return 0;
+}
+
+static int
+set_break(struct uchcom_softc *sc, int onoff)
+{
+	usbd_status err;
+	uint8_t brk1, brk2;
+
+	err = read_reg(sc, UCHCOM_REG_BREAK1, &brk1, UCHCOM_REG_BREAK2, &brk2);
+	if (err)
+		return EIO;
+	if (onoff) {
+		/* on - clear bits */
+		brk1 &= ~UCHCOM_BRK1_MASK;
+		brk2 &= ~UCHCOM_BRK2_MASK;
+	} else {
+		/* off - set bits */
+		brk1 |= UCHCOM_BRK1_MASK;
+		brk2 |= UCHCOM_BRK2_MASK;
+	}
+	err = write_reg(sc, UCHCOM_REG_BREAK1, brk1, UCHCOM_REG_BREAK2, brk2);
+	if (err)
+		return EIO;
+
+	return 0;
+}
+
+static int
+calc_divider_settings(struct uchcom_divider *dp, uint32_t rate)
+{
+	int i;
+	const struct uchcom_divider_record *rp;
+	uint32_t div, rem, mod;
+
+	/* find record */
+	for (i=0; i<NUM_DIVIDERS; i++) {
+		if (dividers[i].dvr_high >= rate &&
+		    dividers[i].dvr_low <= rate) {
+			rp = &dividers[i];
+			goto found;
+		}
+	}
+	return -1;
+
+found:
+	dp->dv_prescaler = rp->dvr_divider.dv_prescaler;
+	if (rp->dvr_base_clock == UCHCOM_BASE_UNKNOWN)
+		dp->dv_div = rp->dvr_divider.dv_div;
+	else {
+		div = rp->dvr_base_clock / rate;
+		rem = rp->dvr_base_clock % rate;
+		if (div==0 || div>=0xFF)
+			return -1;
+		if ((rem<<1) >= rate)
+			div += 1;
+		dp->dv_div = (uint8_t)-div;
+	}
+
+	mod = UCHCOM_BPS_MOD_BASE/rate + UCHCOM_BPS_MOD_BASE_OFS;
+	mod = mod + mod/2;
+
+	dp->dv_mod = mod / 0x100;
+
+	return 0;
+}
+
+static int
+set_dte_rate(struct uchcom_softc *sc, uint32_t rate)
+{
+	usbd_status err;
+	struct uchcom_divider dv;
+
+	if (calc_divider_settings(&dv, rate))
+		return EINVAL;
+
+	if ((err = write_reg(sc,
+			     UCHCOM_REG_BPS_PRE, dv.dv_prescaler,
+			     UCHCOM_REG_BPS_DIV, dv.dv_div)) ||
+	    (err = write_reg(sc,
+			     UCHCOM_REG_BPS_MOD, dv.dv_mod,
+			     UCHCOM_REG_BPS_PAD, 0))) {
+		device_printf(sc->sc_ucom.sc_dev, " cannot set DTE rate: %s\n",
+			      usbd_errstr(err));
+		return EIO;
+	}
+
+	return 0;
+}
+
+static int
+set_line_control(struct uchcom_softc *sc, tcflag_t cflag)
+{
+	usbd_status err;
+	uint8_t lcr1 = 0, lcr2 = 0;
+
+	err = read_reg(sc, UCHCOM_REG_LCR1, &lcr1, UCHCOM_REG_LCR2, &lcr2);
+	if (err) {
+		device_printf(sc->sc_ucom.sc_dev, " cannot get LCR: %s\n",
+		        usbd_errstr(err));
+		return EIO;
+	}
+
+	lcr1 &= ~UCHCOM_LCR1_MASK;
+	lcr2 &= ~UCHCOM_LCR2_MASK;
+
+	/*
+	 * XXX: it is difficult to handle the line control appropriately:
+	 *   - CS8, !CSTOPB and any parity mode seems ok, but
+	 *   - the chip doesn't have the function to calculate parity
+	 *     in !CS8 mode.
+	 *   - it is unclear that the chip supports CS5,6 mode.
+	 *   - it is unclear how to handle stop bits.
+	 */
+
+	switch (ISSET(cflag, CSIZE)) {
+	case CS5:
+	case CS6:
+	case CS7:
+		return EINVAL;
+	case CS8:
+		break;
+	}
+
+	if (ISSET(cflag, PARENB)) {
+		lcr1 |= UCHCOM_LCR1_PARENB;
+		if (ISSET(cflag, PARODD))
+			lcr2 |= UCHCOM_LCR2_PARODD;
+		else
+			lcr2 |= UCHCOM_LCR2_PAREVEN;
+	}
+
+	err = write_reg(sc, UCHCOM_REG_LCR1, lcr1, UCHCOM_REG_LCR2, lcr2);
+	if (err) {
+		device_printf(sc->sc_ucom.sc_dev, "cannot set LCR: %s\n",
+			      usbd_errstr(err));
+		return EIO;
+	}
+
+	return 0;
+}
+
+static int
+clear_chip(struct uchcom_softc *sc)
+{
+	usbd_status err;
+
+	DPRINTF(("%s: clear\n", USBDEVNAME(sc->sc_dev)));
+	err = generic_control_out(sc, UCHCOM_REQ_RESET, 0, 0);
+	if (err) {
+		device_printf(sc->sc_ucom.sc_dev, "cannot clear: %s\n",
+			      usbd_errstr(err));
+		return EIO;
+	}
+
+	return 0;
+}
+
+static int
+reset_chip(struct uchcom_softc *sc)
+{
+	usbd_status err;
+	uint8_t lcr1, lcr2, pre, div, mod;
+	uint16_t val=0, idx=0;
+
+	err = read_reg(sc, UCHCOM_REG_LCR1, &lcr1, UCHCOM_REG_LCR2, &lcr2);
+	if (err)
+		goto failed;
+
+	err = read_reg(sc, UCHCOM_REG_BPS_PRE, &pre, UCHCOM_REG_BPS_DIV, &div);
+	if (err)
+		goto failed;
+
+	err = read_reg(sc, UCHCOM_REG_BPS_MOD, &mod, UCHCOM_REG_BPS_PAD, NULL);
+	if (err)
+		goto failed;
+
+	val |= (uint16_t)(lcr1&0xF0) << 8;
+	val |= 0x01;
+	val |= (uint16_t)(lcr2&0x0F) << 8;
+	val |= 0x02;
+	idx |= pre & 0x07;
+	val |= 0x04;
+	idx |= (uint16_t)div << 8;
+	val |= 0x08;
+	idx |= mod & 0xF8;
+	val |= 0x10;
+
+	DPRINTF(("%s: reset v=0x%04X, i=0x%04X\n",
+		 USBDEVNAME(sc->sc_dev), val, idx));
+
+	err = generic_control_out(sc, UCHCOM_REQ_RESET, val, idx);
+	if (err)
+		goto failed;
+
+	return 0;
+
+failed:
+	device_printf(sc->sc_ucom.sc_dev, "cannot reset: %s\n",
+		      usbd_errstr(err));
+	return EIO;
+}
+
+static int
+setup_comm(struct uchcom_softc *sc)
+{
+	int ret;
+
+	ret = update_version(sc);
+	if (ret)
+		return ret;
+
+	ret = clear_chip(sc);
+	if (ret)
+		return ret;
+
+	ret = set_dte_rate(sc, TTYDEF_SPEED);
+	if (ret)
+		return ret;
+
+	ret = set_line_control(sc, CS8);
+	if (ret)
+		return ret;
+
+	ret = update_status(sc);
+	if (ret)
+		return ret;
+
+	ret = reset_chip(sc);
+	if (ret)
+		return ret;
+
+	ret = set_dte_rate(sc, TTYDEF_SPEED); /* XXX */
+	if (ret)
+		return ret;
+
+	sc->sc_dtr = sc->sc_rts = 1;
+	ret = set_dtrrts(sc, sc->sc_dtr, sc->sc_rts);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static int
+setup_intr_pipe(struct uchcom_softc *sc)
+{
+	usbd_status err;
+	struct ucom_softc *ucom = &sc->sc_ucom;
+	if (sc->sc_intr_endpoint != -1 && sc->sc_intr_pipe == NULL) {
+		sc->sc_intr_buf = malloc(sc->sc_intr_size, M_USBDEV, M_WAITOK);
+		err = usbd_open_pipe_intr(ucom->sc_iface,
+					  sc->sc_intr_endpoint,
+					  USBD_SHORT_XFER_OK,
+					  &sc->sc_intr_pipe, sc,
+					  sc->sc_intr_buf,
+					  sc->sc_intr_size,
+					  uchcom_intr, USBD_DEFAULT_INTERVAL);
+		if (err) {
+			device_printf(ucom->sc_dev, 
+				      "cannot open interrupt pipe: %s\n",
+				      usbd_errstr(err));
+			return EIO;
+		}
+	}
+	return 0;
+}
+
+static void
+close_intr_pipe(struct uchcom_softc *sc)
+{
+	usbd_status err;
+	struct ucom_softc *ucom = &sc->sc_ucom;
+	if (ucom->sc_dying)
+		return;
+
+	if (sc->sc_intr_pipe != NULL) {
+		err = usbd_abort_pipe(sc->sc_intr_pipe);
+		if (err)
+			device_printf(ucom->sc_dev, 
+				      "abort interrupt pipe failed: %s\n",
+				      usbd_errstr(err));
+		err = usbd_close_pipe(sc->sc_intr_pipe);
+		if (err)
+			device_printf(ucom->sc_dev,
+				      " close interrupt pipe failed: %s\n",
+				      usbd_errstr(err));
+		free(sc->sc_intr_buf, M_USBDEV);
+		sc->sc_intr_pipe = NULL;
+	}
+}
+
+
+/* ----------------------------------------------------------------------
+ * methods for ucom
+ */
+void
+uchcom_get_status(void *arg, int portno, u_char *rlsr, u_char *rmsr)
+{
+	struct uchcom_softc *sc = arg;
+
+	if (sc->sc_ucom.sc_dying)
+		return;
+
+	*rlsr = sc->sc_lsr;
+	*rmsr = sc->sc_msr;
+}
+
+void
+uchcom_set(void *arg, int portno, int reg, int onoff)
+{
+	struct uchcom_softc *sc = arg;
+	
+	if (sc->sc_ucom.sc_dying)
+		return;
+
+	switch (reg) {
+	case UCOM_SET_DTR:
+		sc->sc_dtr = !!onoff;
+		set_dtrrts(sc, sc->sc_dtr, sc->sc_rts);
+		break;
+	case UCOM_SET_RTS:
+		sc->sc_rts = !!onoff;
+		set_dtrrts(sc, sc->sc_dtr, sc->sc_rts);
+		break;
+	case UCOM_SET_BREAK:
+		set_break(sc, onoff);
+		break;
+	}
+}
+
+int
+uchcom_param(void *arg, int portno, struct termios *t)
+{
+	struct uchcom_softc *sc = arg;
+	int ret;
+
+	if (sc->sc_ucom.sc_dying)
+		return 0;
+
+	ret = set_line_control(sc, t->c_cflag);
+	if (ret)
+		return ret;
+
+	ret = set_dte_rate(sc, t->c_ospeed);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+int
+uchcom_open(void *arg, int portno)
+{
+	int ret;
+	struct uchcom_softc *sc = arg;
+
+	if (sc->sc_ucom.sc_dying)
+		return EIO;
+
+	ret = setup_intr_pipe(sc);
+	if (ret)
+		return ret;
+
+	ret = setup_comm(sc);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+void
+uchcom_close(void *arg, int portno)
+{
+	struct uchcom_softc *sc = arg;
+
+	if (sc->sc_ucom.sc_dying)
+		return;
+
+	close_intr_pipe(sc);
+}
+
+
+/* ----------------------------------------------------------------------
+ * callback when the modem status is changed.
+ */
+void
+uchcom_intr(usbd_xfer_handle xfer, usbd_private_handle priv,
+	    usbd_status status)
+{
+	struct uchcom_softc *sc = priv;
+	u_char *buf = sc->sc_intr_buf;
+
+	if (sc->sc_ucom.sc_dying)
+		return;
+
+	if (status != USBD_NORMAL_COMPLETION) {
+		if (status == USBD_NOT_STARTED || status == USBD_CANCELLED)
+			return;
+
+		DPRINTF(("%s: abnormal status: %s\n",
+			 USBDEVNAME(sc->sc_dev), usbd_errstr(status)));
+		usbd_clear_endpoint_stall_async(sc->sc_intr_pipe);
+		return;
+	}
+	DPRINTF(("%s: intr: 0x%02X 0x%02X 0x%02X 0x%02X "
+		 "0x%02X 0x%02X 0x%02X 0x%02X\n",
+		 USBDEVNAME(sc->sc_dev),
+		 (unsigned)buf[0], (unsigned)buf[1],
+		 (unsigned)buf[2], (unsigned)buf[3],
+		 (unsigned)buf[4], (unsigned)buf[5],
+		 (unsigned)buf[6], (unsigned)buf[7]));
+
+	convert_status(sc, buf[UCHCOM_INTR_STAT1]);
+	ucom_status_change(&sc->sc_ucom);
+}
+
+static device_method_t uchcom_methods[] = {
+	/* Device interface */
+	DEVMETHOD(device_probe, uchcom_match),
+	DEVMETHOD(device_attach, uchcom_attach),
+	DEVMETHOD(device_detach, uchcom_detach),
+
+	{ 0, 0 }
+};
+
+static driver_t uchcom_driver = {
+	"ucom",
+	uchcom_methods,
+	sizeof (struct uchcom_softc)
+};
+
+DRIVER_MODULE(uchcom, uhub, uchcom_driver, ucom_devclass, usbd_driver_load, 0);
+MODULE_DEPEND(uchcom, usb, 1, 1, 1);
+MODULE_DEPEND(uchcom, ucom, UCOM_MINVER, UCOM_PREFVER, UCOM_MAXVER);