diff options
author | rgrimes <rgrimes@FreeBSD.org> | 1995-05-28 13:24:16 +0000 |
---|---|---|
committer | rgrimes <rgrimes@FreeBSD.org> | 1995-05-28 13:24:16 +0000 |
commit | 7d26ac765ae02dcf0c5b23f359aa42d527b4fe01 (patch) | |
tree | a6be015edb556fcd724838e6481dae0f621b6a3f /sys/i386 | |
parent | a18e016a4c13b75dff3e2ebc879df094ed096282 (diff) | |
download | FreeBSD-src-7d26ac765ae02dcf0c5b23f359aa42d527b4fe01.zip FreeBSD-src-7d26ac765ae02dcf0c5b23f359aa42d527b4fe01.tar.gz |
Submitted by: dufault
LINT talks about about 2.1. I changed that to 2.0.5,
and clarified why certain devices need "at scbus?".
There is still a crazy "PCVT=210" which shouldn't be there,
but corrected comment as it is needed for 2.0.5.
Diffstat (limited to 'sys/i386')
-rw-r--r-- | sys/i386/conf/LINT | 15 | ||||
-rw-r--r-- | sys/i386/conf/NOTES | 15 |
2 files changed, 20 insertions, 10 deletions
diff --git a/sys/i386/conf/LINT b/sys/i386/conf/LINT index 8ec2d28..b233893 100644 --- a/sys/i386/conf/LINT +++ b/sys/i386/conf/LINT @@ -2,7 +2,7 @@ # LINT -- config file for checking all the sources, tries to pull in # as much of the source tree as it can. # -# $Id: LINT,v 1.182 1995/05/18 09:16:53 davidg Exp $ +# $Id: LINT,v 1.183 1995/05/27 04:32:12 davidg Exp $ # # NB: You probably don't want to try running a kernel built from this # file. Instead, you should start from GENERIC, and add options from @@ -264,7 +264,7 @@ options QUOTA #enable disk quotas # device drivers. The host adapters are listed in the ISA and PCI # device configuration sections below. # -# Beginning with FreeBSD 2.1 you can wire down your SCSI devices so +# Beginning with FreeBSD 2.0.5 you can wire down your SCSI devices so # that a given bus, target, and LUN always come on line as the same # device unit. In earlier versions the unit numbers were assigned # in the order that the devices were probed on the SCSI bus. This @@ -291,7 +291,7 @@ options QUOTA #enable disk quotas # All SCSI devices allocate as many units as are required. -# The "unknown" device (uk? in pre-2.1) is now part of the base SCSI +# The "unknown" device (uk? in pre-2.0.5) is now part of the base SCSI # configuration and doesn't have to be explicitly configured. controller scbus0 #base SCSI code @@ -300,6 +300,11 @@ device sd0 #SCSI disks device st0 #SCSI tapes device cd0 #SCSI CD-ROMs +# The previous devices (ch, sd, st, cd) are recognized by config. +# config doesn't (and shouldn't) know about these newer ones, +# so we have to specify that they are on a SCSI bus with the "at scbus?" +# clause. + device worm0 at scbus? # SCSI worm device pt0 at scbus? # SCSI processor type device sctarg0 at scbus? # SCSI target @@ -309,7 +314,7 @@ device sctarg0 at scbus? # SCSI target # SCSIDEBUG: When defined enables debugging macros # NO_SCSI_SENSE: When defined disables sense descriptions (about 4k) # SCSI_REPORT_GEOMETRY: Always report disk geometry at boot up instead -# only when booting verbosely. +# of only when booting verbosely. options SCSIDEBUG #options NO_SCSI_SENSE options SCSI_REPORT_GEOMETRY @@ -388,7 +393,7 @@ options BOUNCE_BUFFERS # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint -#options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1 +#options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.0.5 #options XSERVER # include code for XFree86 #options FAT_CURSOR # start with block cursor diff --git a/sys/i386/conf/NOTES b/sys/i386/conf/NOTES index 8ec2d28..b233893 100644 --- a/sys/i386/conf/NOTES +++ b/sys/i386/conf/NOTES @@ -2,7 +2,7 @@ # LINT -- config file for checking all the sources, tries to pull in # as much of the source tree as it can. # -# $Id: LINT,v 1.182 1995/05/18 09:16:53 davidg Exp $ +# $Id: LINT,v 1.183 1995/05/27 04:32:12 davidg Exp $ # # NB: You probably don't want to try running a kernel built from this # file. Instead, you should start from GENERIC, and add options from @@ -264,7 +264,7 @@ options QUOTA #enable disk quotas # device drivers. The host adapters are listed in the ISA and PCI # device configuration sections below. # -# Beginning with FreeBSD 2.1 you can wire down your SCSI devices so +# Beginning with FreeBSD 2.0.5 you can wire down your SCSI devices so # that a given bus, target, and LUN always come on line as the same # device unit. In earlier versions the unit numbers were assigned # in the order that the devices were probed on the SCSI bus. This @@ -291,7 +291,7 @@ options QUOTA #enable disk quotas # All SCSI devices allocate as many units as are required. -# The "unknown" device (uk? in pre-2.1) is now part of the base SCSI +# The "unknown" device (uk? in pre-2.0.5) is now part of the base SCSI # configuration and doesn't have to be explicitly configured. controller scbus0 #base SCSI code @@ -300,6 +300,11 @@ device sd0 #SCSI disks device st0 #SCSI tapes device cd0 #SCSI CD-ROMs +# The previous devices (ch, sd, st, cd) are recognized by config. +# config doesn't (and shouldn't) know about these newer ones, +# so we have to specify that they are on a SCSI bus with the "at scbus?" +# clause. + device worm0 at scbus? # SCSI worm device pt0 at scbus? # SCSI processor type device sctarg0 at scbus? # SCSI target @@ -309,7 +314,7 @@ device sctarg0 at scbus? # SCSI target # SCSIDEBUG: When defined enables debugging macros # NO_SCSI_SENSE: When defined disables sense descriptions (about 4k) # SCSI_REPORT_GEOMETRY: Always report disk geometry at boot up instead -# only when booting verbosely. +# of only when booting verbosely. options SCSIDEBUG #options NO_SCSI_SENSE options SCSI_REPORT_GEOMETRY @@ -388,7 +393,7 @@ options BOUNCE_BUFFERS # Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver #device vt0 at isa? port "IO_KBD" tty irq 1 vector pcrint -#options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.1 +#options "PCVT_FREEBSD=210" # pcvt running on FreeBSD 2.0.5 #options XSERVER # include code for XFree86 #options FAT_CURSOR # start with block cursor |