Removed all `vector xxxintr' specifications. Interrupt handlers are now

configured in drivers.

2 files changed, 10 insertions, 10 deletions

diff --git a/sys/i386/isa/sound/README.FREEBSD b/sys/i386/isa/sound/README.FREEBSD
index 3603bfe..9979d12 100644
--- a/sys/i386/isa/sound/README.FREEBSD
+++ b/sys/i386/isa/sound/README.FREEBSD
@@ -90,7 +90,7 @@ Lugi also has  Sujal's PnP driver .
 This is my kernel configuration for my SB16 PnP:
 
 controller      snd0
-device sb0      at isa? port 0x220 irq 10 conflicts drq 3 vector sbintr
+device sb0      at isa? port 0x220 irq 10 conflicts drq 3
 device sbxvi0   at isa? port? irq? drq 5 conflicts
 device opl0     at isa? port 0x388 conflicts
 device sbmidi0  at isa? port 0x300 irq? conflicts
@@ -123,13 +123,13 @@ To configure your guspnp PRO if you have a motherboard which supports
 PnP:
 
 	controller snd0
-	device gus0 at isa?  vector gusintr
+	device gus0 at isa?
 
 NONPNP CONFIGURATION
 To configure your guspnp PRO if your motherboard does NOT support
 PnP:
 
-device gus0 at isa? port  0x220 irq 11 drq 1 flags 0x3 vector gusintr
+device gus0 at isa? port  0x220 irq 11 drq 1 flags 0x3
 
 
 the gus pnp is fully software configurable and the above configuration
diff --git a/sys/i386/isa/sound/sound.doc b/sys/i386/isa/sound/sound.doc
index 0b43822..b91901e 100644
--- a/sys/i386/isa/sound/sound.doc
+++ b/sys/i386/isa/sound/sound.doc
@@ -1,4 +1,4 @@
-$Id$
+$Id: sound.doc,v 1.8 1997/02/22 09:38:15 peter Exp $
 
 Instructions on using audio on a FreeBSD 2.1 (or 2.0-current) system.
 See also /sys/i386/conf/LINT.
@@ -14,10 +14,10 @@ Uncomment one or more of these device entries, depending on what type of
 sound card you have:
 
 # ProAudioSpectrum PCM and Midi - for PAS
-#device pas0     at isa? port 0x388 irq 10 drq 6 vector pasintr
+#device pas0     at isa? port 0x388 irq 10 drq 6
 
 # SoundBlaster DSP driver - for SB, SB Pro, SB16, PAS(emulating SB)
-#device sb0      at isa? port 0x220 irq 7 drq 1 vector sbintr
+#device sb0      at isa? port 0x220 irq 7 drq 1
 
 # SoundBlaster 16 DSP driver - for SB16 - requires sb0 device
 #device sbxvi0   at isa? drq 5
@@ -28,13 +28,13 @@ sound card you have:
 # Gravis UltraSound - for GUS, GUS16, GUSMAX
 # For cards that use 2 DMA Channels:
 #     drq = Write DMA Channel, flags = Read DMA Channel
-#device gus0 at isa? port 0x220 irq 11 drq 1 flags 0x3 vector gusintr
+#device gus0 at isa? port 0x220 irq 11 drq 1 flags 0x3
 
 # Gravis UltraSound 16 bit option - for GUS16 - requires gus0
-#device gusxvi0 at isa? port 0x530 irq 7 drq 3 vector adintr
+#device gusxvi0 at isa? port 0x530 irq 7 drq 3
 
 # MS Sound System (AD1848 Based Boards)
-#device mss0 at isa? port 0x530 irq 10 drq 1 vector adintr
+#device mss0 at isa? port 0x530 irq 10 drq 1
 
 # Yamaha OPL-2/OPL-3 FM - for SB, SB Pro, SB16, PAS
 #device opl0     at isa? port 0x388
@@ -43,7 +43,7 @@ sound card you have:
 #device mpu0     at isa? port 0x330 irq 6 drq 0
 
 # 6850 UART Midi
-#device uart0 at isa? port 0x330 irq 5 vector "m6850intr"
+#device uart0 at isa? port 0x330 irq 5
 
 You may add one or more of the following depending on what you do and don't
 want compiled into your kernel.  Note:  Excluding things with EXCLUDE_...