diff options
author | sos <sos@FreeBSD.org> | 1998-12-27 14:21:37 +0000 |
---|---|---|
committer | sos <sos@FreeBSD.org> | 1998-12-27 14:21:37 +0000 |
commit | 3ea5a3c11d9de75d335ebfbfd17a2eedaa15a8d8 (patch) | |
tree | 05ebe7b416c792cb29dd64c665bfc9e8d1743080 /sys/i386/isa/sound/Readme.modules | |
parent | 6e00996c0599fe131e89c9b8095eef18f39f7560 (diff) | |
download | FreeBSD-src-3ea5a3c11d9de75d335ebfbfd17a2eedaa15a8d8.zip FreeBSD-src-3ea5a3c11d9de75d335ebfbfd17a2eedaa15a8d8.tar.gz |
Pre 3.0 branch cleanup sos#2: sound
Superceded by the snd driver...
Diffstat (limited to 'sys/i386/isa/sound/Readme.modules')
-rw-r--r-- | sys/i386/isa/sound/Readme.modules | 99 |
1 files changed, 0 insertions, 99 deletions
diff --git a/sys/i386/isa/sound/Readme.modules b/sys/i386/isa/sound/Readme.modules deleted file mode 100644 index 2dab125..0000000 --- a/sys/i386/isa/sound/Readme.modules +++ /dev/null @@ -1,99 +0,0 @@ -Building a loadable sound driver -================================ - -Loadable module support in version 3.5 of VoxWare is mostly rewritten since -the previous version (3.0.1). This means that some things have changed. - -To compile the sound driver as a loadable module you have to perform -the following steps: - -1) Install modules-1.2.8.tar.gz package (or later if available). -2a) Check that symbol remap_page_range is defined in linux/init/ksyms.c. -Insert a line containing "X(remap_page_range)," if required. The driver will -not load if this line is missing. -2b) Recompile kernel with soundcard support disabled. -3) Boot the new kernel. -4) cd to the sound driver source directory (this directory). It's no -longer required that the sound driver sources are installed in the -kernel source tree (linux/drivers/sound). When installing a separately -distributed sound driver you may install the sources for example to -/usr/src/sound. -5) Execute make in the sound driver source directory. Enter -configuration parameters as described in Readme.cards. Then just wait until -the driver is compiled OK. -6) Copy sound.o to the directory where insmod expects to find it. -("make install" copies it to /lib/modules/misc). -7) Use command "insmod sound" to load the driver. - -8) The sound driver can be removed using command "rmmod sound". - - -Parameters accepted by the loadable sound driver -================================================ - -Setting DMA buffer size ------------------------ - -The driver allocates a DMA buffer (or two for full duplex devices) -every time the audio device (/dev/dsp or /dev/audio) is opened -and frees it when the device is closed. Size of this buffer is defined -when the driver is configured (the last question). The buffer size -can be redefined when loading the driver if required (note that this is -an optional feature which is not normally required). The buffer size -is redefined by adding dma_pagesize= parameter to the insmod command line. -For example: - - insmod sound dma_buffsize=32768 - -Minimum buffer size is 4096 and the maximum depends on the DMA channe. -For 8 bit channels (0 to 3) the limit is 64k and for 16 bit ones (5 to 7) -it's 128k. Driver selects a suitable buffer size automaticly in case -you try to spesify an invalid size. - -Q: What is the right DMA buffer size? - -A: It depends on the sampling rate, machine speed and the load of the system. -Large buffers are required on slow machines, when recording/playing CD-quality -audio or when there are other processes running on the same system. Also -recording to hard disk is likely to require large buffers. - -Very small buffers are sufficient when you are just playing 8kHz audio files -on an empty P133 system. Using a 128k byffer just wastes 120k (or 250k) -of valuable physical RAM memory. - -The right buffer sice can be easily found by making some experiments -with the dma_buffsize= parameter. I use usually 16k buffers on a DX4/100 system -and 64k on an old 386 system. - -NOTE! DMA buffers are used only by /dev/audio# and /dev/dsp# devices. - Other device files don't use them but there are two exceptions: - GUS driver uses DMA buffers when loading samples to the card. - Ensoniq SoundScape driver uses them when doanloading the microcode - file (sndscape.co[012]) to the card. Using large buffers doesn't - increase performance in these cases. - -Configuring device parameters when loading the driver ------------------------------------------------------ - -The loadable version of the sound driver accepts now the same -sound= parameter that has been available in the LILO command line. -In this way it's possible to change I/O port, IRQ and DMA addresses -and to enable/disable various cards at load time. Normally -the driver uses the configuration parameters entered when compiling -and configuring the driver. -Look at Readme.linux for more info. - -NOTE! This method is not normally required. You should use it only when - you have to use different configuration than normally. The sound= - command line parameter is error phrone and not recommended. - -Debugging and tracing ---------------------- - -Modularized sound driver doesn't display messages during initialization as -the kernel compiled one does. This feature can be turned on by adding -init_trace=1 to the insmod command line. - -For example: - - insmod sound init_trace=1 |