Remove the if_ze and if_zp drivers.

These drivers were cloned from the ed and ep drivers back in 1994
when PCMCIA cards were a very new thing and we had no other support
for such devices.  They treated the PCIC (the chip which controls the
PCCARD slot) as part of their device and generally hacked their way
to success.  They have significantly bit-rotted relative to their
ancestor drivers (ed & ep) and they were a dead-end on the evolution
path to proper PCCARD support in FreeBSD.

They have been terminally broken since August 18 where mdodd forgot
them and nobody seems to have missed them enough to fix them since.

I found no outstanding PRs against these drivers.

1 files changed, 0 insertions, 232 deletions

diff --git a/sys/i386/isa/pcicx.c b/sys/i386/isa/pcicx.c
deleted file mode 100644
index 07d950e..0000000
--- a/sys/i386/isa/pcicx.c
+++ /dev/null
@@ -1,232 +0,0 @@
-/*-
- * TODO:
- * [1] integrate into current if_ed.c
- * [2] parse tuples to find out where to map the shared memory buffer,
- *     and what to write into the configuration register
- * [3] move pcic-specific code into a separate module.
- *
- * Device driver for IBM PCMCIA Credit Card Adapter for Ethernet,
- * if_ze.c
- *
- * Based on the Device driver for National Semiconductor DS8390 ethernet
- * adapters by David Greenman.  Modifications for PCMCIA by Keith Moore.
- * Adapted for FreeBSD 1.1.5 by Jordan Hubbard.
- *
- * Currently supports only the IBM Credit Card Adapter for Ethernet, but
- * could probably work with other PCMCIA cards also, if it were modified
- * to get the locations of the PCMCIA configuration option register (COR)
- * by parsing the configuration tuples, rather than by hard-coding in
- * the value expected by IBM's card.
- *
- * Sources for data on the PCMCIA/IBM CCAE specific portions of the driver:
- *
- * [1] _Local Area Network Credit Card Adapters Technical Reference_,
- *     IBM Corp., SC30-3585-00, part # 33G9243.
- * [2] "pre-alpha" PCMCIA support code for Linux by Barry Jaspan.
- * [3] Intel 82536SL PC Card Interface Controller Data Sheet, Intel
- *     Order Number 290423-002
- * [4] National Semiconductor DP83902A ST-NIC (tm) Serial Network
- *     Interface Controller for Twisted Pair data sheet.
- *
- *
- * Copyright (C) 1993, David Greenman. This software may be used, modified,
- *   copied, distributed, and sold, in both source and binary form provided
- *   that the above copyright and these terms are retained. Under no
- *   circumstances is the author responsible for the proper functioning
- *   of this software, nor does the author assume any responsibility
- *   for damages incurred with its use.
- *
- * $FreeBSD$
- */
-#include <sys/param.h>
-#if defined(__FreeBSD__)
-#include <sys/systm.h>
-#include <machine/clock.h>
-#endif
-#include <i386/isa/pcic.h>
-
-/*
- * map a portion of the card's memory space into system memory
- * space.
- *
- * slot = # of the slot the card is plugged into
- * window = which pcic memory map registers to use (0..4)
- * sys_addr = base system PHYSICAL memory address where we want it.  must
- *	      be on an appropriate boundary (lower 12 bits are zero).
- * card_addr = the base address of the card's memory to correspond
- *             to sys_addr
- * length = length of the segment to map (may be rounded up as necessary)
- * type = which card memory space to map (attribute or shared)
- * width = 1 for byte-wide mapping; 2 for word (16-bit) mapping.
- */
-
-void
-pcic_map_memory (int slot, int window, unsigned long sys_addr,
-		 unsigned long card_addr, unsigned long length,
-		 enum memtype type, int width)
-{
-    unsigned short offset;
-    unsigned short mem_start_addr;
-    unsigned short mem_stop_addr;
-
-    sys_addr >>= 12;
-    card_addr >>= 12;
-    length >>= 12;
-    /*
-     * compute an offset for the chip such that
-     * (sys_addr + offset) = card_addr
-     * but the arithmetic is done modulo 2^14
-     */
-    offset = (card_addr - sys_addr) & 0x3FFF;
-    /*
-     * now OR in the bit for "attribute memory" if necessary
-     */
-    if (type == ATTRIBUTE) {
-	offset |= (PCIC_REG << 8);
-	/* REG == "region active" pin on card */
-    }
-    /*
-     * okay, set up the chip memory mapping registers, and turn
-     * on the enable bit for this window.
-     * if we are doing 16-bit wide accesses (width == 2),
-     * turn on the appropriate bit.
-     *
-     * XXX for now, we set all of the wait state bits to zero.
-     * Not really sure how they should be set.
-     */
-    mem_start_addr = sys_addr & 0xFFF;
-    if (width == 2)
-	mem_start_addr |= (PCIC_DATA16 << 8);
-    mem_stop_addr = (sys_addr + length) & 0xFFF;
-
-    pcic_putw (slot, MEM_START_ADDR(window), mem_start_addr);
-    pcic_putw (slot, MEM_STOP_ADDR(window), mem_stop_addr);
-    pcic_putw (slot, MEM_OFFSET(window), offset);
-    /*
-     * Assert the bit (PCIC_MEMCS16) that says to decode all of
-     * the address lines.
-     */
-    pcic_putb (slot, PCIC_ADDRWINE,
-	       pcic_getb (slot, PCIC_ADDRWINE) |
-	       MEM_ENABLE_BIT(window) | PCIC_MEMCS16);
-}
-
-void
-pcic_unmap_memory (int slot, int window)
-{
-    /*
-     * seems like we need to turn off the enable bit first, after which
-     * we can clear the registers out just to be sure.
-     */
-    pcic_putb (slot, PCIC_ADDRWINE,
-	       pcic_getb (slot, PCIC_ADDRWINE) & ~MEM_ENABLE_BIT(window));
-    pcic_putw (slot, MEM_START_ADDR(window), 0);
-    pcic_putw (slot, MEM_STOP_ADDR(window), 0);
-    pcic_putw (slot, MEM_OFFSET(window), 0);
-}
-
-/*
- * map a range of addresses into system i/o space
- * (no translation of i/o addresses is possible)
- *
- * 'width' is:
- * + 0 to tell the PCIC to generate the ISA IOCS16* signal from
- *   the PCMCIA IOIS16* signal.
- * + 1 to select 8-bit width
- * + 2 to select 16-bit width
- */
-
-void
-pcic_map_io (int slot, int window, unsigned short base, unsigned short length,
-	     unsigned short width)
-{
-    unsigned char x;
-
-    pcic_putw (slot, IO_START_ADDR(window), base);
-    pcic_putw (slot, IO_STOP_ADDR(window), base+length-1);
-    /*
-     * select the bits that determine whether
-     * an i/o operation is 8 or 16 bits wide
-     */
-    x = pcic_getb (slot, PCIC_IOCTL);
-    switch (width) {
-    case 0:			/* PCMCIA card decides */
-	if (window)
-	    x = (x & 0xf0) | PCIC_IO1_CS16;
-	else
-	    x = (x & 0x0f) | PCIC_IO0_CS16;
-	break;
-    case 1:			/* 8 bits wide */
-	break;
-    case 2:			/* 16 bits wide */
-	if (window)
-	    x = (x & 0xf0) | PCIC_IO1_16BIT;
-	else
-	    x = (x & 0x0f) | PCIC_IO0_16BIT;
-	break;
-    }
-    pcic_putb (slot, PCIC_IOCTL, x);
-    pcic_putb (slot, PCIC_ADDRWINE,
-	       pcic_getb (slot, PCIC_ADDRWINE) | IO_ENABLE_BIT(window));
-}
-
-#ifdef TEST
-void
-pcic_unmap_io (int slot, int window)
-{
-    pcic_putb (slot, PCIC_ADDRWINE,
-	       pcic_getb (slot, PCIC_ADDRWINE) & ~IO_ENABLE_BIT(window));
-    pcic_putw (slot, IO_START_ADDR(window), 0);
-    pcic_putw (slot, IO_STOP_ADDR(window), 0);
-}
-#endif /* TEST */
-
-/*
- * tell the PCIC which irq we want to use.  only the following are legal:
- * 3, 4, 5, 7, 9, 10, 11, 12, 14, 15
- *
- * NB: 'irq' is an interrupt NUMBER, not a MASK as in struct isa_device.
- */
-
-void
-pcic_map_irq (int slot, int irq)
-{
-    if (irq < 3 || irq == 6 || irq == 8 || irq == 13 || irq > 15) {
-	printf ("zp: pcic_map_irq (slot %d): illegal irq %d\n", slot, irq);
-	return;
-    }
-    pcic_putb (slot, PCIC_INT_GEN,
-	       pcic_getb (slot, PCIC_INT_GEN) | (irq & 0x0F));
-}
-
-void
-pcic_power_on (int slot)
-{
-    pcic_putb (slot, PCIC_STATUS,
-	       pcic_getb (slot, PCIC_STATUS) | PCIC_POW);
-    DELAY (100000);
-    pcic_putb (slot, PCIC_POWER,
-	       pcic_getb (slot, PCIC_POWER) | PCIC_DISRST | PCIC_PCPWRE);
-    DELAY (100000);
-    pcic_putb (slot, PCIC_POWER,
-	       pcic_getb (slot, PCIC_POWER) | PCIC_OUTENA);
-}
-
-void
-pcic_power_off (int slot)
-{
-    pcic_putb (slot, PCIC_POWER,
-	       pcic_getb (slot, PCIC_POWER) & ~(PCIC_OUTENA|PCIC_PCPWRE));
-}
-
-void
-pcic_reset (int slot)
-{
-    /* assert RESET (by clearing a bit!), wait a bit, and de-assert it */
-    pcic_putb (slot, PCIC_INT_GEN,
-	       pcic_getb (slot, PCIC_INT_GEN) & ~PCIC_CARDRESET);
-    DELAY (100000);
-    pcic_putb (slot, PCIC_INT_GEN,
-	       pcic_getb (slot, PCIC_INT_GEN) | PCIC_CARDRESET);
-}
-