Mitsumi cd rom driver from Holger Viet as fixed up by Gary Clark II.

Still a little rought, but it seems to be working.

1 files changed, 150 insertions, 0 deletions

diff --git a/sys/i386/isa/mcdreg.h b/sys/i386/isa/mcdreg.h
new file mode 100644
index 0000000..83664a7
--- /dev/null
+++ b/sys/i386/isa/mcdreg.h
@@ -0,0 +1,150 @@
+/*
+ * Copyright 1993 by Holger Veit (data part)
+ * Copyright 1993 by Brian Moore (audio part)
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *	This software was developed by Holger Veit and Brian Moore
+ *      for use with "386BSD" and similar operating systems.
+ *    "Similar operating systems" includes mainly non-profit oriented
+ *    systems for research and education, including but not restricted to
+ *    "NetBSD", "FreeBSD", "Mach" (by CMU).
+ * 4. Neither the name of the developer(s) nor the name "386BSD"
+ *    may be used to endorse or promote products derived from this
+ *    software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE DEVELOPER(S) ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
+ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE DEVELOPER(S) BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
+ * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT
+ * OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+ * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * This file contains definitions for some cdrom control commands
+ * and status codes. This info was "inherited" from the DOS MTMCDE.SYS
+ * driver, and is thus not complete (and may even be wrong). Some day
+ * the manufacturer or anyone else might provide better documentation,
+ * so this file (and the driver) will then have a better quality.
+ *
+ *	$Id$
+ */
+
+#ifndef MCD_H
+#define	MCD_H
+
+#ifdef __GNUC__
+#if __GNUC__ >= 2
+#pragma pack(1)
+#endif
+#endif
+
+typedef unsigned char	bcd_t;
+#define	M_msf(msf)	msf[0]
+#define	S_msf(msf)	msf[1]
+#define	F_msf(msf)	msf[2]
+
+/* io lines used */
+#define	MCD_IO_BASE	0x300
+
+#define	mcd_command	0
+#define	mcd_status	0
+#define	mcd_rdata	0
+
+#define	mcd_reset	1
+#define	mcd_xfer	1
+#define	mcd_ctl2	2 /* XXX Is this right? */
+
+#define	mcd_config	3
+#define	MCD_MASK_DMA	0x07	/* bits 2-0 = DMA channel */
+#define	MCD_MASK_IRQ	0x70	/* bits 6-4 = INT number */
+				/* 001 = int 2,9 */
+				/* 010 = int 3 */
+				/* 011 = int 5 */
+				/* 100 = int 10 */
+				/* 101 = int 11 */
+/* flags */
+#define	STATUS_AVAIL	0xb
+#define	DATA_AVAIL	0xf
+
+/* ports */
+#define	MCD_DATA	0
+#define	MCD_FLAGS	1
+#define	MCD_DONT_KNOW	2	/* What are these two ports for??? */
+#define	CHANNEL		3
+
+/* Status bits */
+#define	MCD_ST_DOOROPEN		0x80
+#define	MCD_ST_DSKIN		0x40
+#define	MCD_ST_DSKCHNG		0x20
+#define	MCD_ST_BUSY		0x04
+#define	MCD_ST_AUDIOBSY		0x02
+
+/* commands known by the controller */
+#define	MCD_CMDRESET		0x00
+#define	MCD_CMDGETVOLINFO	0x10	/* gets mcd_volinfo */
+#define	MCD_CMDGETQCHN		0x20	/* gets mcd_qchninfo */
+#define	MCD_CMDGETSTAT		0x40	/* gets a byte of status */
+#define	MCD_CMDSETMODE		0x50	/* set transmission mode, needs byte */
+#define	MCD_MD_RAW		0x60
+#define	MCD_MD_COOKED		0x01
+#define	MCD_MD_TOC		0x05
+#define	MCD_CMDSTOPAUDIO	0x70
+#define	MCD_CMDGETVOLUME	0x8E	/* gets mcd_volume */
+#define	MCD_CMDSETVOLUME	0xAE	/* sets mcd_volume */
+#define	MCD_CMDREAD1		0xB0	/* read n sectors */
+#define	MCD_CMDREAD2		0xC0	/* read from-to */
+#define	MCD_CMDCONTINFO		0xDC	/* Get controller info */
+#define	MCD_CMDEJECTDISK	0xF6
+#define	MCD_CMDCLOSETRAY	0xF8
+#define	MCD_CMDLOCKDRV		0xFE	/* needs byte */
+#define	MCD_LK_UNLOCK	0x00
+#define	MCD_LK_LOCK	0x01
+#define	MCD_LK_TEST	0x02
+
+struct mcd_volinfo {
+	bcd_t	trk_low;
+	bcd_t	trk_high;
+	bcd_t	vol_msf[3];
+	bcd_t	trk1_msf[3];
+};
+
+struct mcd_qchninfo {
+	u_char	ctrl_adr;
+	u_char	trk_no;
+	u_char	idx_no;
+	bcd_t	trk_size_msf[3];
+	u_char	:8;
+	bcd_t	hd_pos_msf[3];
+};
+
+struct mcd_volume {
+	u_char	v0l;
+	u_char	v0rs;
+	u_char	v0r;
+	u_char	v0ls;
+};
+
+struct mcd_read1 {
+	bcd_t	start_msf[3];
+	u_char	nsec[3];
+};
+
+struct mcd_read2 {
+	bcd_t	start_msf[3];
+	bcd_t	end_msf[3];
+};
+#endif /* MCD_H */