Import kernel parts of the v0.0.5alpha Stallion driver(s).

This is now two seperate drivers that support (I think) all of Stallions's
range, including the high performance intelligent cards, and their older
cards.

Submitted by: Greg Ungerer (gerg@stallion.oz.au)

(User-mode parts and patches to follow)

1 files changed, 3876 insertions, 0 deletions

diff --git a/sys/i386/isa/istallion.c b/sys/i386/isa/istallion.c
new file mode 100644
index 0000000..6fef3b8
--- /dev/null
+++ b/sys/i386/isa/istallion.c
@@ -0,0 +1,3876 @@
+/*****************************************************************************/
+
+/*
+ * istallion.c  -- stallion intelligent multiport serial driver.
+ *
+ * Copyright (c) 1994-1996 Greg Ungerer (gerg@stallion.oz.au).
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. All advertising materials mentioning features or use of this software
+ *    must display the following acknowledgement:
+ *	This product includes software developed by Greg Ungerer.
+ * 4. Neither the name of the author nor the names of any co-contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ */
+
+/*****************************************************************************/
+
+#define	TTYDEFCHARS	1
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/kernel.h>
+#include <sys/malloc.h>
+#include <sys/ioctl.h>
+#include <sys/tty.h>
+#include <sys/proc.h>
+#include <sys/user.h>
+#include <sys/conf.h>
+#include <sys/file.h>
+#include <sys/uio.h>
+#include <sys/syslog.h>
+#include <sys/devconf.h>
+#include <machine/cpu.h>
+#include <machine/clock.h>
+#include <i386/isa/isa.h>
+#include <i386/isa/isa_device.h>
+#include <i386/isa/cdk.h>
+#include <i386/isa/comstats.h>
+
+/*****************************************************************************/
+
+/*
+ *	Define the version level of the kernel - so we can compile in the
+ *	appropriate bits of code. By default this will compile for a 2.1
+ *	level kernel.
+ */
+#define	VFREEBSD	210
+
+#if VFREEBSD >= 220
+#define	STATIC		static
+#else
+#define	STATIC
+#endif
+
+/*****************************************************************************/
+
+/*
+ *	Define different board types. Not all of the following board types
+ *	are supported by this driver. But I will use the standard "assigned"
+ *	board numbers. Currently supported boards are abbreviated as:
+ *	ECP = EasyConnection 8/64, ONB = ONboard, BBY = Brumby and
+ *	STAL = Stallion.
+ */
+#define	BRD_UNKNOWN	0
+#define	BRD_STALLION	1
+#define	BRD_BRUMBY4	2
+#define	BRD_ONBOARD2	3
+#define	BRD_ONBOARD	4
+#define	BRD_BRUMBY8	5
+#define	BRD_BRUMBY16	6
+#define	BRD_ONBOARDE	7
+#define	BRD_ONBOARD32	9
+#define	BRD_ONBOARD2_32	10
+#define	BRD_ONBOARDRS	11
+#define	BRD_EASYIO	20
+#define	BRD_ECH		21
+#define	BRD_ECHMC	22
+#define	BRD_ECP		23
+#define BRD_ECPE	24
+#define	BRD_ECPMC	25
+#define	BRD_ECHPCI	26
+
+#define	BRD_BRUMBY	BRD_BRUMBY4
+
+/*****************************************************************************/
+
+/*
+ *	Define important driver limitations.
+ */
+#define	STL_MAXBRDS		8
+#define	STL_MAXPANELS		4
+#define	STL_PORTSPERPANEL	16
+#define	STL_PORTSPERBRD		64
+
+#define	STL_MAXCHANS		STL_PORTSPERBRD
+
+
+/*
+ *	Define the important minor number break down bits. These have been
+ *	chosen to be "compatable" with the standard sio driver minor numbers.
+ *	Extra high bits are used to distinguish between boards and also for
+ *	really high port numbers (> 32).
+ */
+#define	STL_CALLOUTDEV	0x80
+#define	STL_CTRLLOCK	0x40
+#define	STL_CTRLINIT	0x20
+#define	STL_CTRLDEV	(STL_CTRLLOCK | STL_CTRLINIT)
+
+#define	STL_MEMDEV	0x07000000
+
+#define	STL_DEFSPEED	9600
+#define	STL_DEFCFLAG	(CS8 | CREAD | HUPCL)
+
+/*****************************************************************************/
+
+/*
+ *	Define our local driver identity first. Set up stuff to deal with
+ *	all the local structures required by a serial tty driver.
+ */
+static char	*stli_drvname = "stli";
+static char	*stli_longdrvname = "Stallion Multiport Serial Driver";
+static char	*stli_drvversion = "0.0.5";
+
+static int	stli_nrbrds = 0;
+static int	stli_doingtimeout = 0;
+
+static char	*__file__ = /*__FILE__*/ "istallion.c";
+
+/*
+ *	Define some macros to use to class define boards.
+ */
+#define	BRD_ISA		0x1
+#define	BRD_EISA	0x2
+#define	BRD_MCA		0x4
+#define	BRD_PCI		0x8
+
+static unsigned char	stli_stliprobed[STL_MAXBRDS];
+
+/*****************************************************************************/
+
+/*
+ *	Define a set of structures to hold all the board/panel/port info
+ *	for our ports. These will be dynamically allocated as required at
+ *	driver initialization time.
+ */
+
+/*
+ *	Port and board structures to hold status info about each object.
+ *	The board structure contains pointers to structures for each port
+ *	connected to it. Panels are not distinguished here, since
+ *	communication with the slave board will always be on a per port
+ *	basis.
+ */
+typedef struct {
+	struct tty	tty;
+	int		portnr;
+	int		panelnr;
+	int		brdnr;
+	int		ioaddr;
+	int		callout;
+	int		devnr;
+	int		dtrwait;
+	int		dotimestamp;
+	int		waitopens;
+	int		hotchar;
+	int		rc;
+	int		argsize;
+	void		*argp;
+	unsigned int	state;
+	unsigned int	sigs;
+	struct termios	initintios;
+	struct termios	initouttios;
+	struct termios	lockintios;
+	struct termios	lockouttios;
+	struct timeval	timestamp;
+	asysigs_t	asig;
+	unsigned long	addr;
+	unsigned long	rxlost;
+	unsigned long	rxoffset;
+	unsigned long	txoffset;
+	unsigned long	pflag;
+	unsigned int	rxsize;
+	unsigned int	txsize;
+	unsigned char	reqidx;
+	unsigned char	reqbit;
+	unsigned char	portidx;
+	unsigned char	portbit;
+} stliport_t;
+
+/*
+ *	Use a structure of function pointers to do board level operations.
+ *	These include, enable/disable, paging shared memory, interrupting, etc.
+ */
+typedef struct stlibrd {
+	int		brdnr;
+	int		brdtype;
+	int		unitid;
+	int		state;
+	int		nrpanels;
+	int		nrports;
+	int		nrdevs;
+	unsigned int	iobase;
+	unsigned long	paddr;
+	void		*vaddr;
+	int		memsize;
+	int		pagesize;
+	int		hostoffset;
+	int		slaveoffset;
+	int		bitsize;
+	int		confbits;
+	void		(*init)(struct stlibrd *brdp);
+	void		(*enable)(struct stlibrd *brdp);
+	void		(*reenable)(struct stlibrd *brdp);
+	void		(*disable)(struct stlibrd *brdp);
+	void		(*intr)(struct stlibrd *brdp);
+	void		(*reset)(struct stlibrd *brdp);
+	char		*(*getmemptr)(struct stlibrd *brdp,
+				unsigned long offset, int line);
+	int		panels[STL_MAXPANELS];
+	int		panelids[STL_MAXPANELS];
+	stliport_t	*ports[STL_PORTSPERBRD];
+} stlibrd_t;
+
+static stlibrd_t	*stli_brds[STL_MAXBRDS];
+
+static int		stli_shared = 0;
+
+/*
+ *	Keep a local char buffer for processing chars into the LD. We
+ *	do this to avoid copying from the boards shared memory one char
+ *	at a time.
+ */
+static int		stli_rxtmplen;
+static stliport_t	*stli_rxtmpport;
+static char		stli_rxtmpbuf[TTYHOG];
+
+/*
+ *	Define global stats structures. Not used often, and can be re-used
+ *	for each stats call.
+ */
+static comstats_t	stli_comstats;
+static combrd_t		stli_brdstats;
+static asystats_t	stli_cdkstats;
+
+/*
+ *	Per board state flags. Used with the state field of the board struct.
+ *	Not really much here... All we need to do is keep track of whether
+ *	the board has been detected, and whether it is actully running a slave
+ *	or not.
+ */
+#define	BST_FOUND	0x1
+#define	BST_STARTED	0x2
+
+/*
+ *	Define the set of port state flags. These are marked for internal
+ *	state purposes only, usually to do with the state of communications
+ *	with the slave. They need to be updated atomically.
+ */
+#define	ST_INITIALIZING	0x1
+#define	ST_INITIALIZED	0x2
+#define	ST_OPENING	0x4
+#define	ST_CLOSING	0x8
+#define	ST_CMDING	0x10
+#define	ST_RXING	0x20
+#define	ST_TXBUSY	0x40
+#define	ST_DOFLUSHRX	0x80
+#define	ST_DOFLUSHTX	0x100
+#define	ST_DOSIGS	0x200
+#define	ST_GETSIGS	0x400
+#define	ST_DTRWAIT	0x800
+
+/*
+ *	Define an array of board names as printable strings. Handy for
+ *	referencing boards when printing trace and stuff.
+ */
+static char	*stli_brdnames[] = {
+	"Unknown",
+	"Stallion",
+	"Brumby",
+	"ONboard-MC",
+	"ONboard",
+	"Brumby",
+	"Brumby",
+	"ONboard-EI",
+	(char *) NULL,
+	"ONboard",
+	"ONboard-MC",
+	"ONboard-MC",
+	(char *) NULL,
+	(char *) NULL,
+	(char *) NULL,
+	(char *) NULL,
+	(char *) NULL,
+	(char *) NULL,
+	(char *) NULL,
+	(char *) NULL,
+	"EasyIO",
+	"EC8/32-AT",
+	"EC8/32-MC",
+	"EC8/64-AT",
+	"EC8/64-EI",
+	"EC8/64-MC",
+	"EC8/32-PCI",
+};
+
+/*****************************************************************************/
+
+/*
+ *	Hardware configuration info for ECP boards. These defines apply
+ *	to the directly accessable io ports of the ECP. There is a set of
+ *	defines for each ECP board type, ISA, EISA and MCA.
+ */
+#define	ECP_IOSIZE	4
+#define	ECP_MEMSIZE	(128 * 1024)
+#define	ECP_ATPAGESIZE	(4 * 1024)
+#define	ECP_EIPAGESIZE	(64 * 1024)
+#define	ECP_MCPAGESIZE	(4 * 1024)
+
+#define	STL_EISAID	0x8c4e
+
+/*
+ *	Important defines for the ISA class of ECP board.
+ */
+#define	ECP_ATIREG	0
+#define	ECP_ATCONFR	1
+#define	ECP_ATMEMAR	2
+#define	ECP_ATMEMPR	3
+#define	ECP_ATSTOP	0x1
+#define	ECP_ATINTENAB	0x10
+#define	ECP_ATENABLE	0x20
+#define	ECP_ATDISABLE	0x00
+#define	ECP_ATADDRMASK	0x3f000
+#define	ECP_ATADDRSHFT	12
+
+/*
+ *	Important defines for the EISA class of ECP board.
+ */
+#define	ECP_EIIREG	0
+#define	ECP_EIMEMARL	1
+#define	ECP_EICONFR	2
+#define	ECP_EIMEMARH	3
+#define	ECP_EIENABLE	0x1
+#define	ECP_EIDISABLE	0x0
+#define	ECP_EISTOP	0x4
+#define	ECP_EIEDGE	0x00
+#define	ECP_EILEVEL	0x80
+#define	ECP_EIADDRMASKL	0x00ff0000
+#define	ECP_EIADDRSHFTL	16
+#define	ECP_EIADDRMASKH	0xff000000
+#define	ECP_EIADDRSHFTH	24
+#define	ECP_EIBRDENAB	0xc84
+
+#define	ECP_EISAID	0x4
+
+/*
+ *	Important defines for the Micro-channel class of ECP board.
+ *	(It has a lot in common with the ISA boards.)
+ */
+#define	ECP_MCIREG	0
+#define	ECP_MCCONFR	1
+#define	ECP_MCSTOP	0x20
+#define	ECP_MCENABLE	0x80
+#define	ECP_MCDISABLE	0x00
+
+/*
+ *	Hardware configuration info for ONboard and Brumby boards. These
+ *	defines apply to the directly accessable io ports of these boards.
+ */
+#define	ONB_IOSIZE	16
+#define	ONB_MEMSIZE	(64 * 1024)
+#define	ONB_ATPAGESIZE	(64 * 1024)
+#define	ONB_MCPAGESIZE	(64 * 1024)
+#define	ONB_EIMEMSIZE	(128 * 1024)
+#define	ONB_EIPAGESIZE	(64 * 1024)
+
+/*
+ *	Important defines for the ISA class of ONboard board.
+ */
+#define	ONB_ATIREG	0
+#define	ONB_ATMEMAR	1
+#define	ONB_ATCONFR	2
+#define	ONB_ATSTOP	0x4
+#define	ONB_ATENABLE	0x01
+#define	ONB_ATDISABLE	0x00
+#define	ONB_ATADDRMASK	0xff0000
+#define	ONB_ATADDRSHFT	16
+
+#define	ONB_HIMEMENAB	0x02
+
+/*
+ *	Important defines for the EISA class of ONboard board.
+ */
+#define	ONB_EIIREG	0
+#define	ONB_EIMEMARL	1
+#define	ONB_EICONFR	2
+#define	ONB_EIMEMARH	3
+#define	ONB_EIENABLE	0x1
+#define	ONB_EIDISABLE	0x0
+#define	ONB_EISTOP	0x4
+#define	ONB_EIEDGE	0x00
+#define	ONB_EILEVEL	0x80
+#define	ONB_EIADDRMASKL	0x00ff0000
+#define	ONB_EIADDRSHFTL	16
+#define	ONB_EIADDRMASKH	0xff000000
+#define	ONB_EIADDRSHFTH	24
+#define	ONB_EIBRDENAB	0xc84
+
+#define	ONB_EISAID	0x1
+
+/*
+ *	Important defines for the Brumby boards. They are pretty simple,
+ *	there is not much that is programmably configurable.
+ */
+#define	BBY_IOSIZE	16
+#define	BBY_MEMSIZE	(64 * 1024)
+#define	BBY_PAGESIZE	(16 * 1024)
+
+#define	BBY_ATIREG	0
+#define	BBY_ATCONFR	1
+#define	BBY_ATSTOP	0x4
+
+/*
+ *	Important defines for the Stallion boards. They are pretty simple,
+ *	there is not much that is programmably configurable.
+ */
+#define	STAL_IOSIZE	16
+#define	STAL_MEMSIZE	(64 * 1024)
+#define	STAL_PAGESIZE	(64 * 1024)
+
+/*
+ *	Define the set of status register values for EasyConnection panels.
+ *	The signature will return with the status value for each panel. From
+ *	this we can determine what is attached to the board - before we have
+ *	actually down loaded any code to it.
+ */
+#define	ECH_PNLSTATUS	2
+#define	ECH_PNL16PORT	0x20
+#define	ECH_PNLIDMASK	0x07
+#define	ECH_PNLINTRPEND	0x80
+
+/*
+ *	Define some macros to do things to the board. Even those these boards
+ *	are somewhat related there is often significantly different ways of
+ *	doing some operation on it (like enable, paging, reset, etc). So each
+ *	board class has a set of functions which do the commonly required
+ *	operations. The macros below basically just call these functions,
+ *	generally checking for a NULL function - which means that the board
+ *	needs nothing done to it to achieve this operation!
+ */
+#define	EBRDINIT(brdp)					\
+	if (brdp->init != NULL)				\
+		(* brdp->init)(brdp)
+
+#define	EBRDENABLE(brdp)				\
+	if (brdp->enable != NULL)			\
+		(* brdp->enable)(brdp);
+
+#define	EBRDDISABLE(brdp)				\
+	if (brdp->disable != NULL)			\
+		(* brdp->disable)(brdp);
+
+#define	EBRDINTR(brdp)					\
+	if (brdp->intr != NULL)				\
+		(* brdp->intr)(brdp);
+
+#define	EBRDRESET(brdp)					\
+	if (brdp->reset != NULL)			\
+		(* brdp->reset)(brdp);
+
+#define	EBRDGETMEMPTR(brdp,offset)			\
+	(* brdp->getmemptr)(brdp, offset, __LINE__)
+
+/*
+ *	Define the maximal baud rate.
+ */
+#define	STL_MAXBAUD	230400
+
+/*****************************************************************************/
+
+/*
+ *	Define macros to extract a brd and port number from a minor number.
+ *	This uses the extended minor number range in the upper 2 bytes of
+ *	the device number. This gives us plenty of minor numbers to play
+ *	with...
+ */
+#define	MKDEV2BRD(m)	(((m) & 0x00700000) >> 20)
+#define	MKDEV2PORT(m)	(((m) & 0x1f) | (((m) & 0x00010000) >> 11))
+
+/*
+ *	Define some handy local macros...
+ */
+#ifndef	MIN
+#define	MIN(a,b)	(((a) <= (b)) ? (a) : (b))
+#endif
+
+/*****************************************************************************/
+
+/*
+ *	Declare all those functions in this driver!  First up is the set of
+ *	externally visible functions.
+ */
+int	stliprobe(struct isa_device *idp);
+int	stliattach(struct isa_device *idp);
+
+STATIC	d_open_t	stliopen;
+STATIC	d_close_t	stliclose;
+STATIC	d_read_t	stliread;
+STATIC	d_write_t	stliwrite;
+STATIC	d_ioctl_t	stliioctl;
+STATIC	d_stop_t	stlistop;
+
+#if VFREEBSD >= 220
+STATIC	d_devtotty_t	stlidevtotty;
+#else
+struct tty		*stlidevtotty(dev_t dev);
+#endif
+
+/*
+ *	Internal function prototypes.
+ */
+static stliport_t *stli_dev2port(dev_t dev);
+static int	stli_chksharemem(void);
+static int	stli_isaprobe(struct isa_device *idp);
+static int	stli_eisaprobe(struct isa_device *idp);
+static int	stli_mcaprobe(struct isa_device *idp);
+static int	stli_brdinit(stlibrd_t *brdp);
+static int	stli_brdattach(stlibrd_t *brdp);
+static int	stli_initecp(stlibrd_t *brdp);
+static int	stli_initonb(stlibrd_t *brdp);
+static int	stli_initports(stlibrd_t *brdp);
+static int	stli_startbrd(stlibrd_t *brdp);
+static void	stli_poll(void *arg);
+static void	stli_brdpoll(stlibrd_t *brdp, volatile cdkhdr_t *hdrp);
+static int	stli_hostcmd(stlibrd_t *brdp, stliport_t *portp);
+static void	stli_dodelaycmd(stliport_t *portp, volatile cdkctrl_t *cp);
+static void	stli_mkasysigs(asysigs_t *sp, int dtr, int rts);
+static long	stli_mktiocm(unsigned long sigvalue);
+static void	stli_rxprocess(stlibrd_t *brdp, stliport_t *portp);
+static void	stli_flush(stliport_t *portp, int flag);
+static void	stli_start(struct tty *tp);
+static int	stli_param(struct tty *tp, struct termios *tiosp);
+static void	stli_ttyoptim(stliport_t *portp, struct termios *tiosp);
+static void	stli_dtrwakeup(void *arg);
+static int	stli_initopen(stliport_t *portp);
+static int	stli_shutdownclose(stliport_t *portp);
+static int	stli_rawopen(stlibrd_t *brdp, stliport_t *portp,
+			unsigned long arg, int wait);
+static int	stli_rawclose(stlibrd_t *brdp, stliport_t *portp,
+			unsigned long arg, int wait);
+static int	stli_cmdwait(stlibrd_t *brdp, stliport_t *portp,
+			unsigned long cmd, void *arg, int size, int copyback);
+static void	stli_sendcmd(stlibrd_t *brdp, stliport_t *portp,
+			unsigned long cmd, void *arg, int size, int copyback);
+static void	stli_mkasyport(stliport_t *portp, asyport_t *pp,
+			struct termios *tiosp);
+static int	stli_memrw(dev_t dev, struct uio *uiop, int flag);
+static int	stli_memioctl(dev_t dev, int cmd, caddr_t data, int flag,
+			struct proc *p);
+static int	stli_getbrdstats(caddr_t data);
+static int	stli_getportstats(stliport_t *portp, caddr_t data);
+static int	stli_clrportstats(stliport_t *portp, caddr_t data);
+static stliport_t *stli_getport(int brdnr, int panelnr, int portnr);
+
+static void	stli_ecpinit(stlibrd_t *brdp);
+static void	stli_ecpenable(stlibrd_t *brdp);
+static void	stli_ecpdisable(stlibrd_t *brdp);
+static void	stli_ecpreset(stlibrd_t *brdp);
+static char	*stli_ecpgetmemptr(stlibrd_t *brdp, unsigned long offset,
+			int line);
+static void	stli_ecpintr(stlibrd_t *brdp);
+static void	stli_ecpeiinit(stlibrd_t *brdp);
+static void	stli_ecpeienable(stlibrd_t *brdp);
+static void	stli_ecpeidisable(stlibrd_t *brdp);
+static void	stli_ecpeireset(stlibrd_t *brdp);
+static char	*stli_ecpeigetmemptr(stlibrd_t *brdp, unsigned long offset,
+			int line);
+static void	stli_ecpmcenable(stlibrd_t *brdp);
+static void	stli_ecpmcdisable(stlibrd_t *brdp);
+static void	stli_ecpmcreset(stlibrd_t *brdp);
+static char	*stli_ecpmcgetmemptr(stlibrd_t *brdp, unsigned long offset,
+			int line);
+
+static void	stli_onbinit(stlibrd_t *brdp);
+static void	stli_onbenable(stlibrd_t *brdp);
+static void	stli_onbdisable(stlibrd_t *brdp);
+static void	stli_onbreset(stlibrd_t *brdp);
+static char	*stli_onbgetmemptr(stlibrd_t *brdp, unsigned long offset,
+			int line);
+static void	stli_onbeinit(stlibrd_t *brdp);
+static void	stli_onbeenable(stlibrd_t *brdp);
+static void	stli_onbedisable(stlibrd_t *brdp);
+static void	stli_onbereset(stlibrd_t *brdp);
+static char	*stli_onbegetmemptr(stlibrd_t *brdp, unsigned long offset,
+			int line);
+static void	stli_bbyinit(stlibrd_t *brdp);
+static void	stli_bbyreset(stlibrd_t *brdp);
+static char	*stli_bbygetmemptr(stlibrd_t *brdp, unsigned long offset,
+			int line);
+static void	stli_stalinit(stlibrd_t *brdp);
+static void	stli_stalreset(stlibrd_t *brdp);
+static char	*stli_stalgetmemptr(stlibrd_t *brdp, unsigned long offset,
+			int line);
+
+/*****************************************************************************/
+
+/*
+ *	Declare the driver isa structure.
+ */
+struct isa_driver	stlidriver = {
+	stliprobe, stliattach, "stli"
+};
+
+/*****************************************************************************/
+
+#if VFREEBSD >= 220
+
+/*
+ *	FreeBSD-2.2+ kernel linkage.
+ */
+
+#define	CDEV_MAJOR	72
+
+static struct cdevsw stli_cdevsw = 
+	{ stliopen,	stliclose,	stliread,	stliwrite,
+	  stliioctl,	stlistop,	noreset,	stlidevtotty,
+	  ttselect,	nommap,		NULL,		"stli",
+	  NULL,		-1 };
+
+static stli_devsw_installed = 0;
+
+static void stli_drvinit(void *unused)
+{
+	dev_t	dev;
+
+	if (! stli_devsw_installed ) {
+		dev = makedev(CDEV_MAJOR, 0);
+		cdevsw_add(&dev, &stli_cdevsw, NULL);
+		stli_devsw_installed = 1;
+    	}
+}
+
+SYSINIT(sidev,SI_SUB_DRIVERS,SI_ORDER_MIDDLE+CDEV_MAJOR,stli_drvinit,NULL)
+
+#endif
+
+/*****************************************************************************/
+
+static stlibrd_t *stli_brdalloc()
+{
+	stlibrd_t	*brdp;
+
+	brdp = (stlibrd_t *) malloc(sizeof(stlibrd_t), M_TTYS, M_NOWAIT);
+	if (brdp == (stlibrd_t *) NULL) {
+		printf("STALLION: failed to allocate memory (size=%d)\n",
+			sizeof(stlibrd_t));
+		return((stlibrd_t *) NULL);
+	}
+	bzero(brdp, sizeof(stlibrd_t));
+	return(brdp);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Find an available internal board number (unit number). The problem
+ *	is that the same unit numbers can be assigned to different class
+ *	boards - but we only want to maintain one setup board structures.
+ */
+
+static int stli_findfreeunit()
+{
+	int	i;
+
+	for (i = 0; (i < STL_MAXBRDS); i++)
+		if (stli_brds[i] == (stlibrd_t *) NULL)
+			break;
+	return((i >= STL_MAXBRDS) ? -1 : i);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Try and determine the ISA board type. Hopefully the board
+ *	configuration entry will help us out, using the flags field.
+ *	If not, we may ne be able to determine the board type...
+ */
+
+static int stli_isaprobe(struct isa_device *idp)
+{
+	int	btype;
+
+#if DEBUG
+	printf("stli_isaprobe(idp=%x): unit=%d iobase=%x flags=%x\n",
+		(int) idp, idp->id_unit, idp->id_iobase, idp->id_flags);
+#endif
+
+	switch (idp->id_flags) {
+	case BRD_STALLION:
+	case BRD_BRUMBY4:
+	case BRD_BRUMBY8:
+	case BRD_BRUMBY16:
+	case BRD_ONBOARD:
+	case BRD_ONBOARD32:
+	case BRD_ECP:
+		btype = idp->id_flags;
+		break;
+	default:
+		btype = 0;
+		break;
+	}
+	return(btype);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Probe for an EISA board type. We should be able to read the EISA ID,
+ *	that will tell us if a board is present or not...
+ */
+
+static int stli_eisaprobe(struct isa_device *idp)
+{
+	int	btype, eid;
+
+#if DEBUG
+	printf("stli_eisaprobe(idp=%x): unit=%d iobase=%x flags=%x\n",
+		(int) idp, idp->id_unit, idp->id_iobase, idp->id_flags);
+#endif
+
+/*
+ *	Firstly check if this is an EISA system. Do this by probing for
+ *	the system board EISA ID. If this is not an EISA system then
+ *	don't bother going any further!
+ */
+	outb(0xc80, 0xff);
+	if (inb(0xc80) == 0xff)
+		return(0);
+
+/*
+ *	Try and read the EISA ID from the board at specified address.
+ *	If one is present it will tell us the board type as well.
+ */
+	outb((idp->id_iobase + 0xc80), 0xff);
+	eid = inb(idp->id_iobase + 0xc80);
+	eid |= inb(idp->id_iobase + 0xc81) << 8;
+	if (eid != STL_EISAID)
+		return(0);
+
+	btype = 0;
+	eid = inb(idp->id_iobase + 0xc82);
+	if (eid == ECP_EISAID)
+		btype = BRD_ECPE;
+	else if (eid == ONB_EISAID)
+		btype = BRD_ONBOARDE;
+
+	outb((idp->id_iobase + 0xc84), 0x1);
+	return(btype);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Probe for an MCA board type. Not really sure how to do this yet,
+ *	so for now just use the supplied flag specifier as board type...
+ */
+
+static int stli_mcaprobe(struct isa_device *idp)
+{
+	int	btype;
+
+#if DEBUG
+	printf("stli_mcaprobe(idp=%x): unit=%d iobase=%x flags=%x\n",
+		(int) idp, idp->id_unit, idp->id_iobase, idp->id_flags);
+#endif
+
+	switch (idp->id_flags) {
+	case BRD_ONBOARD2:
+	case BRD_ONBOARD2_32:
+	case BRD_ONBOARDRS:
+	case BRD_ECHMC:
+	case BRD_ECPMC:
+		btype = idp->id_flags;
+		break;
+	default:
+		btype = 0;
+		break;
+	}
+	return(0);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Probe for a board. This is involved, since we need to enable the
+ *	shared memory region to see if the board is really there or not...
+ */
+
+int stliprobe(struct isa_device *idp)
+{
+	stlibrd_t	*brdp;
+	int		btype, bclass;
+
+#if DEBUG
+	printf("stliprobe(idp=%x): unit=%d iobase=%x flags=%x\n", (int) idp,
+		idp->id_unit, idp->id_iobase, idp->id_flags);
+#endif
+
+	if (idp->id_unit > STL_MAXBRDS)
+		return(0);
+
+/*
+ *	First up determine what bus type of board we might be dealing
+ *	with. It is easy to separate out the ISA from the EISA and MCA
+ *	boards, based on their IO addresses. We may not be able to tell
+ *	the EISA and MCA apart on IO address alone...
+ */
+	bclass = 0;
+	if ((idp->id_iobase > 0) && (idp->id_iobase < 0x400)) {
+		bclass |= BRD_ISA;
+	} else {
+		/* ONboard2 range */
+		if ((idp->id_iobase >= 0x700) && (idp->id_iobase < 0x900))
+			bclass |= BRD_MCA;
+		/* EC-MCA ranges */
+		if ((idp->id_iobase >= 0x7000) && (idp->id_iobase < 0x7400))
+			bclass |= BRD_MCA;
+		if ((idp->id_iobase >= 0x8000) && (idp->id_iobase < 0xc000))
+			bclass |= BRD_MCA;
+		/* EISA board range */
+		if ((idp->id_iobase & ~0xf000) == 0)
+			bclass |= BRD_EISA;
+	}
+
+	if ((bclass == 0) || (idp->id_iobase == 0))
+		return(0);
+
+/*
+ *	Based on the board bus type, try and figure out what it might be...
+ */
+	btype = 0;
+	if (bclass & BRD_ISA)
+		btype = stli_isaprobe(idp);
+	if ((btype == 0) && (bclass & BRD_EISA))
+		btype = stli_eisaprobe(idp);
+	if ((btype == 0) && (bclass & BRD_MCA))
+		btype = stli_mcaprobe(idp);
+	if (btype == 0)
+		return(0);
+
+/*
+ *	Go ahead and try probing for the shared memory region now.
+ *	This way we will really know if the board is here...
+ */
+	if ((brdp = stli_brdalloc()) == (stlibrd_t *) NULL)
+		return(0);
+
+	brdp->brdnr = stli_findfreeunit();
+	brdp->brdtype = btype;
+	brdp->unitid = idp->id_unit;
+	brdp->iobase = idp->id_iobase;
+	brdp->vaddr = idp->id_maddr;
+	brdp->paddr = vtophys(idp->id_maddr);
+
+#if DEBUG
+	printf("%s(%d): btype=%x unit=%d brd=%d io=%x mem=%x(%x)\n",
+		__file__, __LINE__, btype, brdp->unitid, brdp->brdnr,
+		brdp->iobase, brdp->paddr, brdp->vaddr);
+#endif
+
+	stli_stliprobed[idp->id_unit] = brdp->brdnr;
+	stli_brdinit(brdp);
+	if ((brdp->state & BST_FOUND) == 0) {
+		stli_brds[brdp->brdnr] = (stlibrd_t *) NULL;
+		return(0);
+	}
+	stli_nrbrds++;
+	return(1);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Allocate resources for and initialize a board.
+ */
+
+int stliattach(struct isa_device *idp)
+{
+	stlibrd_t	*brdp;
+	int		brdnr;
+
+#if DEBUG
+	printf("stliattach(idp=%x): unit=%d iobase=%x\n", idp,
+		idp->id_unit, idp->id_iobase);
+#endif
+
+	brdnr = stli_stliprobed[idp->id_unit];
+	brdp = stli_brds[brdnr];
+	if (brdp == (stlibrd_t *) NULL)
+		return(0);
+	if (brdp->state & BST_FOUND)
+		stli_brdattach(brdp);
+	return(1);
+}
+
+
+/*****************************************************************************/
+
+STATIC int stliopen(dev_t dev, int flag, int mode, struct proc *p)
+{
+	struct tty	*tp;
+	stlibrd_t	*brdp;
+	stliport_t	*portp;
+	int		error, callout, x;
+
+#if DEBUG
+	printf("stliopen(dev=%x,flag=%x,mode=%x,p=%x)\n", (int) dev, flag,
+		mode, (int) p);
+#endif
+
+/*
+ *	Firstly check if the supplied device number is a valid device.
+ */
+	if (dev & STL_MEMDEV)
+		return(0);
+
+	portp = stli_dev2port(dev);
+	if (portp == (stliport_t *) NULL)
+		return(ENXIO);
+	tp = &portp->tty;
+	callout = minor(dev) & STL_CALLOUTDEV;
+	error = 0;
+
+	x = spltty();
+
+stliopen_restart:
+/*
+ *	Wait here for the DTR drop timeout period to expire.
+ */
+	while (portp->state & ST_DTRWAIT) {
+		error = tsleep(&portp->dtrwait, (TTIPRI | PCATCH),
+			"stlidtr", 0);
+		if (error)
+			goto stliopen_end;
+	}
+
+/*
+ *	If the port is in its raw hardware initialization phase, then
+ *	hold up here 'till it is done.
+ */
+	while (portp->state & (ST_INITIALIZING | ST_CLOSING)) {
+		error = tsleep(&portp->state, (TTIPRI | PCATCH),
+			"stliraw", 0);
+		if (error)
+			goto stliopen_end;
+	}
+
+/*
+ *	We have a valid device, so now we check if it is already open.
+ *	If not then initialize the port hardware and set up the tty
+ *	struct as required.
+ */
+	if ((tp->t_state & TS_ISOPEN) == 0) {
+		tp->t_oproc = stli_start;
+		tp->t_param = stli_param;
+		tp->t_dev = dev;
+		tp->t_termios = callout ? portp->initouttios :
+			portp->initintios;
+		stli_initopen(portp);
+		wakeup(&portp->state);
+		ttsetwater(tp);
+		if ((portp->sigs & TIOCM_CD) || callout)
+			(*linesw[tp->t_line].l_modem)(tp, 1);
+	} else {
+		if (callout) {
+			if (portp->callout == 0) {
+				error = EBUSY;
+				goto stliopen_end;
+			}
+		} else {
+			if (portp->callout != 0) {
+				if (flag & O_NONBLOCK) {
+					error = EBUSY;
+					goto stliopen_end;
+				}
+				error = tsleep(&portp->callout,
+					(TTIPRI | PCATCH), "stlicall", 0);
+				if (error)
+					goto stliopen_end;
+				goto stliopen_restart;
+			}
+		}
+		if ((tp->t_state & TS_XCLUDE) && (p->p_ucred->cr_uid != 0)) {
+			error = EBUSY;
+			goto stliopen_end;
+		}
+	}
+
+/*
+ *	If this port is not the callout device and we do not have carrier
+ *	then we need to sleep, waiting for it to be asserted.
+ */
+	if (((tp->t_state & TS_CARR_ON) == 0) && !callout &&
+			((tp->t_cflag & CLOCAL) == 0) &&
+			((flag & O_NONBLOCK) == 0)) {
+		portp->waitopens++;
+		error = tsleep(TSA_CARR_ON(tp), (TTIPRI | PCATCH), "stlidcd",0);
+		portp->waitopens--;
+		if (error)
+			goto stliopen_end;
+		goto stliopen_restart;
+	}
+
+/*
+ *	Open the line discipline.
+ */
+	error = (*linesw[tp->t_line].l_open)(dev, tp);
+	stli_ttyoptim(portp, &tp->t_termios);
+	if ((tp->t_state & TS_ISOPEN) && callout)
+		portp->callout = 1;
+
+/*
+ *	If for any reason we get to here and the port is not actually
+ *	open then close of the physical hardware - no point leaving it
+ *	active when the open failed...
+ */
+stliopen_end:
+	splx(x);
+	if (((tp->t_state & TS_ISOPEN) == 0) && (portp->waitopens == 0))
+		stli_shutdownclose(portp);
+
+	return(error);
+}
+
+/*****************************************************************************/
+
+STATIC int stliclose(dev_t dev, int flag, int mode, struct proc *p)
+{
+	struct tty	*tp;
+	stliport_t	*portp;
+	int		x;
+
+#if DEBUG
+	printf("stliclose(dev=%x,flag=%x,mode=%x,p=%x)\n", dev, flag, mode, p);
+#endif
+
+	if (dev & STL_MEMDEV)
+		return(0);
+
+	portp = stli_dev2port(dev);
+	if (portp == (stliport_t *) NULL)
+		return(ENXIO);
+	tp = &portp->tty;
+
+	x = spltty();
+	(*linesw[tp->t_line].l_close)(tp, flag);
+	stli_ttyoptim(portp, &tp->t_termios);
+	stli_shutdownclose(portp);
+	ttyclose(tp);
+	splx(x);
+	return(0);
+}
+
+/*****************************************************************************/
+
+STATIC int stliread(dev_t dev, struct uio *uiop, int flag)
+{
+	stliport_t	*portp;
+
+#if DEBUG
+	printf("stliread(dev=%x,uiop=%x,flag=%x)\n", dev, uiop, flag);
+#endif
+
+	if (dev & STL_MEMDEV)
+		return(stli_memrw(dev, uiop, flag));
+
+	portp = stli_dev2port(dev);
+	if (portp == (stliport_t *) NULL)
+		return(ENODEV);
+	return((*linesw[portp->tty.t_line].l_read)(&portp->tty, uiop, flag));
+}
+
+/*****************************************************************************/
+
+#if VFREEBSD >= 220
+
+STATIC void stlistop(struct tty *tp, int rw)
+{
+#if DEBUG
+	printf("stlistop(tp=%x,rw=%x)\n", (int) tp, rw);
+#endif
+
+	stli_flush((stliport_t *) tp, rw);
+}
+
+#else
+
+STATIC int stlistop(struct tty *tp, int rw)
+{
+#if DEBUG
+	printf("stlistop(tp=%x,rw=%x)\n", (int) tp, rw);
+#endif
+
+	stli_flush((stliport_t *) tp, rw);
+	return(0);
+}
+
+#endif
+
+/*****************************************************************************/
+
+STATIC struct tty *stlidevtotty(dev_t dev)
+{
+#if DEBUG
+	printf("stlidevtotty(dev=%x)\n", dev);
+#endif
+	return((struct tty *) stli_dev2port(dev));
+}
+
+/*****************************************************************************/
+
+STATIC int stliwrite(dev_t dev, struct uio *uiop, int flag)
+{
+	stliport_t	*portp;
+
+#if DEBUG
+	printf("stliwrite(dev=%x,uiop=%x,flag=%x)\n", dev, uiop, flag);
+#endif
+
+	if (dev & STL_MEMDEV)
+		return(stli_memrw(dev, uiop, flag));
+
+	portp = stli_dev2port(dev);
+	if (portp == (stliport_t *) NULL)
+		return(ENODEV);
+	return((*linesw[portp->tty.t_line].l_write)(&portp->tty, uiop, flag));
+}
+
+/*****************************************************************************/
+
+STATIC int stliioctl(dev_t dev, int cmd, caddr_t data, int flag, struct proc *p)
+{
+	struct termios	*newtios, *localtios;
+	struct tty	*tp;
+	stlibrd_t	*brdp;
+	stliport_t	*portp;
+	long		arg;
+	int		error, i, x;
+
+#if DEBUG
+	printf("stliioctl(dev=%x,cmd=%x,data=%x,flag=%x,p=%x)\n", dev, cmd,
+		data, flag, p);
+#endif
+
+	dev = minor(dev);
+	if (dev & STL_MEMDEV)
+		return(stli_memioctl(dev, cmd, data, flag, p));
+
+	portp = stli_dev2port(dev);
+	if (portp == (stliport_t *) NULL)
+		return(ENODEV);
+	if ((brdp = stli_brds[portp->brdnr]) == (stlibrd_t *) NULL)
+		return(ENODEV);
+	tp = &portp->tty;
+	error = 0;
+	
+/*
+ *	First up handle ioctls on the control devices.
+ */
+	if (dev & STL_CTRLDEV) {
+		if ((dev & STL_CTRLDEV) == STL_CTRLINIT)
+			localtios = (dev & STL_CALLOUTDEV) ?
+				&portp->initouttios : &portp->initintios;
+		else if ((dev & STL_CTRLDEV) == STL_CTRLLOCK)
+			localtios = (dev & STL_CALLOUTDEV) ?
+				&portp->lockouttios : &portp->lockintios;
+		else
+			return(ENODEV);
+
+		switch (cmd) {
+		case TIOCSETA:
+			if ((error = suser(p->p_ucred, &p->p_acflag)) == 0)
+				*localtios = *((struct termios *) data);
+			break;
+		case TIOCGETA:
+			*((struct termios *) data) = *localtios;
+			break;
+		case TIOCGETD:
+			*((int *) data) = TTYDISC;
+			break;
+		case TIOCGWINSZ:
+			bzero(data, sizeof(struct winsize));
+			break;
+		default:
+			error = ENOTTY;
+			break;
+		}
+		return(error);
+	}
+
+/*
+ *	Deal with 4.3 compatability issues if we have too...
+ */
+#if defined(COMPAT_43) || defined(COMPAT_SUNOS)
+	if (1) {
+		struct termios	tios;
+		int		oldcmd;
+
+		tios = tp->t_termios;
+		oldcmd = cmd;
+		if ((error = ttsetcompat(tp, &cmd, data, &tios)))
+			return(error);
+		if (cmd != oldcmd)
+			data = (caddr_t) &tios;
+	}
+#endif
+
+/*
+ *	Carry out some pre-cmd processing work first...
+ *	Hmmm, not so sure we want this, disable for now...
+ */
+	if ((cmd == TIOCSETA) || (cmd == TIOCSETAW) || (cmd == TIOCSETAF)) {
+		newtios = (struct termios *) data;
+		localtios = (dev & STL_CALLOUTDEV) ? &portp->lockouttios :
+			 &portp->lockintios;
+
+		newtios->c_iflag = (tp->t_iflag & localtios->c_iflag) |
+			(newtios->c_iflag & ~localtios->c_iflag);
+		newtios->c_oflag = (tp->t_oflag & localtios->c_oflag) |
+			(newtios->c_oflag & ~localtios->c_oflag);
+		newtios->c_cflag = (tp->t_cflag & localtios->c_cflag) |
+			(newtios->c_cflag & ~localtios->c_cflag);
+		newtios->c_lflag = (tp->t_lflag & localtios->c_lflag) |
+			(newtios->c_lflag & ~localtios->c_lflag);
+		for (i = 0; (i < NCCS); i++) {
+			if (localtios->c_cc[i] != 0)
+				newtios->c_cc[i] = tp->t_cc[i];
+		}
+		if (localtios->c_ispeed != 0)
+			newtios->c_ispeed = tp->t_ispeed;
+		if (localtios->c_ospeed != 0)
+			newtios->c_ospeed = tp->t_ospeed;
+	}
+
+/*
+ *	Call the line discipline and the common command processing to
+ *	process this command (if they can).
+ */
+	error = (*linesw[tp->t_line].l_ioctl)(tp, cmd, data, flag, p);
+	if (error >= 0)
+		return(error);
+
+	x = spltty();
+	error = ttioctl(tp, cmd, data, flag);
+	stli_ttyoptim(portp, &tp->t_termios);
+	if (error >= 0) {
+		splx(x);
+		return(error);
+	}
+
+	error = 0;
+
+/*
+ *	Process local commands here. These are all commands that only we
+ *	can take care of (they all rely on actually doing something special
+ *	to the actual hardware).
+ */
+	switch (cmd) {
+	case TIOCSBRK:
+		arg = BREAKON;
+		error = stli_cmdwait(brdp, portp, A_BREAK, &arg,
+			sizeof(unsigned long), 0);
+		break;
+	case TIOCCBRK:
+		arg = BREAKOFF;
+		error = stli_cmdwait(brdp, portp, A_BREAK, &arg,
+			sizeof(unsigned long), 0);
+		break;
+	case TIOCSDTR:
+		stli_mkasysigs(&portp->asig, 1, -1);
+		error = stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig,
+			sizeof(asysigs_t), 0);
+		break;
+	case TIOCCDTR:
+		stli_mkasysigs(&portp->asig, 0, -1);
+		error = stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig,
+			sizeof(asysigs_t), 0);
+		break;
+	case TIOCMSET:
+		i = *((int *) data);
+		stli_mkasysigs(&portp->asig, ((i & TIOCM_DTR) ? 1 : 0),
+			((i & TIOCM_RTS) ? 1 : 0));
+		error = stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig,
+			sizeof(asysigs_t), 0);
+		break;
+	case TIOCMBIS:
+		i = *((int *) data);
+		stli_mkasysigs(&portp->asig, ((i & TIOCM_DTR) ? 1 : -1),
+			((i & TIOCM_RTS) ? 1 : -1));
+		error = stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig,
+			sizeof(asysigs_t), 0);
+		break;
+	case TIOCMBIC:
+		i = *((int *) data);
+		stli_mkasysigs(&portp->asig, ((i & TIOCM_DTR) ? 0 : -1),
+			((i & TIOCM_RTS) ? 0 : -1));
+		error = stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig,
+			sizeof(asysigs_t), 0);
+		break;
+	case TIOCMGET:
+		if ((error = stli_cmdwait(brdp, portp, A_GETSIGNALS,
+				&portp->asig, sizeof(asysigs_t), 1)) < 0)
+			break;
+		portp->sigs = stli_mktiocm(portp->asig.sigvalue);
+		*((int *) data) = (portp->sigs | TIOCM_LE);
+		break;
+	case TIOCMSDTRWAIT:
+		if ((error = suser(p->p_ucred, &p->p_acflag)) == 0)
+			portp->dtrwait = *((int *) data) * hz / 100;
+		break;
+	case TIOCMGDTRWAIT:
+		*((int *) data) = portp->dtrwait * 100 / hz;
+		break;
+	case TIOCTIMESTAMP:
+		portp->dotimestamp = 1;
+		*((struct timeval *) data) = portp->timestamp;
+		break;
+	default:
+		error = ENOTTY;
+		break;
+	}
+	splx(x);
+
+	return(error);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Convert the specified minor device number into a port struct
+ *	pointer. Return NULL if the device number is not a valid port.
+ */
+
+STATIC stliport_t *stli_dev2port(dev_t dev)
+{
+	stlibrd_t	*brdp;
+
+	brdp = stli_brds[MKDEV2BRD(dev)];
+	if (brdp == (stlibrd_t *) NULL)
+		return((stliport_t *) NULL);
+	if ((brdp->state & BST_STARTED) == 0)
+		return((stliport_t *) NULL);
+	return(brdp->ports[MKDEV2PORT(dev)]);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Carry out first open operations on a port. This involves a number of
+ *	commands to be sent to the slave. We need to open the port, set the
+ *	notification events, set the initial port settings, get and set the
+ *	initial signal values. We sleep and wait in between each one. But
+ *	this still all happens pretty quickly.
+ */
+
+static int stli_initopen(stliport_t *portp)
+{
+	stlibrd_t	*brdp;
+	asynotify_t	nt;
+	asyport_t	aport;
+	int		rc;
+
+#if DEBUG
+	printf("stli_initopen(portp=%x)\n", (int) portp);
+#endif
+
+	if ((brdp = stli_brds[portp->brdnr]) == (stlibrd_t *) NULL)
+		return(ENXIO);
+	if (portp->state & ST_INITIALIZED)
+		return(0);
+	portp->state |= ST_INITIALIZED;
+
+	if ((rc = stli_rawopen(brdp, portp, 0, 1)) < 0)
+		return(rc);
+
+	bzero(&nt, sizeof(asynotify_t));
+	nt.data = (DT_TXLOW | DT_TXEMPTY | DT_RXBUSY | DT_RXBREAK);
+	nt.signal = SG_DCD;
+	if ((rc = stli_cmdwait(brdp, portp, A_SETNOTIFY, &nt,
+	    sizeof(asynotify_t), 0)) < 0)
+		return(rc);
+
+	stli_mkasyport(portp, &aport, &portp->tty.t_termios);
+	if ((rc = stli_cmdwait(brdp, portp, A_SETPORT, &aport,
+	    sizeof(asyport_t), 0)) < 0)
+		return(rc);
+
+	portp->state |= ST_GETSIGS;
+	if ((rc = stli_cmdwait(brdp, portp, A_GETSIGNALS, &portp->asig,
+	    sizeof(asysigs_t), 1)) < 0)
+		return(rc);
+	if (portp->state & ST_GETSIGS) {
+		portp->sigs = stli_mktiocm(portp->asig.sigvalue);
+		portp->state &= ~ST_GETSIGS;
+	}
+
+	stli_mkasysigs(&portp->asig, 1, 1);
+	if ((rc = stli_cmdwait(brdp, portp, A_SETSIGNALS, &portp->asig,
+	    sizeof(asysigs_t), 0)) < 0)
+		return(rc);
+
+	return(0);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Shutdown the hardware of a port.
+ */
+
+static int stli_shutdownclose(stliport_t *portp)
+{
+	stlibrd_t	*brdp;
+	struct tty	*tp;
+
+#if DEBUG
+	printf("stli_shutdownclose(portp=%x): brdnr=%d panelnr=%d portnr=%d\n",
+		portp, portp->brdnr, portp->panelnr, portp->portnr);
+#endif
+
+	if ((brdp = stli_brds[portp->brdnr]) == (stlibrd_t *) NULL)
+		return(ENXIO);
+
+	tp = &portp->tty;
+	stli_rawclose(brdp, portp, 0, 0);
+	stli_flush(portp, (FWRITE | FREAD));
+	if (tp->t_cflag & HUPCL) {
+		disable_intr();
+		stli_mkasysigs(&portp->asig, 0, 0);
+		if (portp->state & ST_CMDING) {
+			portp->state |= ST_DOSIGS;
+		} else {
+			stli_sendcmd(brdp, portp, A_SETSIGNALS,
+				&portp->asig, sizeof(asysigs_t), 0);
+		}
+		enable_intr();
+		if (portp->dtrwait != 0) {
+			portp->state |= ST_DTRWAIT;
+			timeout(stli_dtrwakeup, portp, portp->dtrwait);
+		}
+	}
+	portp->callout = 0;
+	portp->state &= ~ST_INITIALIZED;
+	wakeup(&portp->callout);
+	wakeup(TSA_CARR_ON(tp));
+	return(0);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Clear the DTR waiting flag, and wake up any sleepers waiting for
+ *	DTR wait period to finish.
+ */
+
+static void stli_dtrwakeup(void *arg)
+{
+	stliport_t	*portp;
+
+	portp = (stliport_t *) arg;
+	portp->state &= ~ST_DTRWAIT;
+	wakeup(&portp->dtrwait);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Send an open message to the slave. This will sleep waiting for the
+ *	acknowledgement, so must have user context. We need to co-ordinate
+ *	with close events here, since we don't want open and close events
+ *	to overlap.
+ */
+
+static int stli_rawopen(stlibrd_t *brdp, stliport_t *portp, unsigned long arg, int wait)
+{
+	volatile cdkhdr_t	*hdrp;
+	volatile cdkctrl_t	*cp;
+	volatile unsigned char	*bits;
+	int			rc;
+
+#if DEBUG
+	printf("stli_rawopen(brdp=%x,portp=%x,arg=%x,wait=%d)\n", (int) brdp,
+		(int) portp, (int) arg, wait);
+#endif
+
+	disable_intr();
+
+/*
+ *	Slave is already closing this port. This can happen if a hangup
+ *	occurs on this port. So we must wait until it is complete. The
+ *	order of opens and closes may not be preserved across shared
+ *	memory, so we must wait until it is complete.
+ */
+	while (portp->state & ST_CLOSING) {
+		rc = tsleep(&portp->state, (TTIPRI | PCATCH), "stliraw", 0);
+		if (rc) {
+			enable_intr();
+			return(rc);
+		}
+	}
+
+/*
+ *	Everything is ready now, so write the open message into shared
+ *	memory. Once the message is in set the service bits to say that
+ *	this port wants service.
+ */
+	EBRDENABLE(brdp);
+	cp = &((volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr))->ctrl;
+	cp->openarg = arg;
+	cp->open = 1;
+	hdrp = (volatile cdkhdr_t *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
+	bits = ((volatile unsigned char *) hdrp) + brdp->slaveoffset +
+		portp->portidx;
+	*bits |= portp->portbit;
+	EBRDDISABLE(brdp);
+
+	if (wait == 0) {
+		enable_intr();
+		return(0);
+	}
+
+/*
+ *	Slave is in action, so now we must wait for the open acknowledgment
+ *	to come back.
+ */
+	rc = 0;
+	portp->state |= ST_OPENING;
+	while (portp->state & ST_OPENING) {
+		rc = tsleep(&portp->state, (TTIPRI | PCATCH), "stliraw", 0);
+		if (rc) {
+			enable_intr();
+			return(rc);
+		}
+	}
+	enable_intr();
+
+	if ((rc == 0) && (portp->rc != 0))
+		rc = EIO;
+	return(rc);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Send a close message to the slave. Normally this will sleep waiting
+ *	for the acknowledgement, but if wait parameter is 0 it will not. If
+ *	wait is true then must have user context (to sleep).
+ */
+
+static int stli_rawclose(stlibrd_t *brdp, stliport_t *portp, unsigned long arg, int wait)
+{
+	volatile cdkhdr_t	*hdrp;
+	volatile cdkctrl_t	*cp;
+	volatile unsigned char	*bits;
+	int			rc;
+
+#if DEBUG
+	printf("stli_rawclose(brdp=%x,portp=%x,arg=%x,wait=%d)\n", (int) brdp,
+		(int) portp, (int) arg, wait);
+#endif
+
+	disable_intr();
+
+/*
+ *	Slave is already closing this port. This can happen if a hangup
+ *	occurs on this port.
+ */
+	if (wait) {
+		while (portp->state & ST_CLOSING) {
+			rc = tsleep(&portp->state, (TTIPRI | PCATCH),
+				"stliraw", 0);
+			if (rc) {
+				enable_intr();
+				return(rc);
+			}
+		}
+	}
+
+/*
+ *	Write the close command into shared memory.
+ */
+	EBRDENABLE(brdp);
+	cp = &((volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr))->ctrl;
+	cp->closearg = arg;
+	cp->close = 1;
+	hdrp = (volatile cdkhdr_t *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
+	bits = ((volatile unsigned char *) hdrp) + brdp->slaveoffset +
+		portp->portidx;
+	*bits |= portp->portbit;
+	EBRDDISABLE(brdp);
+
+	portp->state |= ST_CLOSING;
+	if (wait == 0) {
+		enable_intr();
+		return(0);
+	}
+
+/*
+ *	Slave is in action, so now we must wait for the open acknowledgment
+ *	to come back.
+ */
+	rc = 0;
+	while (portp->state & ST_CLOSING) {
+		rc = tsleep(&portp->state, (TTIPRI | PCATCH), "stliraw", 0);
+		if (rc) {
+			enable_intr();
+			return(rc);
+		}
+	}
+	enable_intr();
+
+	if ((rc == 0) && (portp->rc != 0))
+		rc = EIO;
+	return(rc);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Send a command to the slave and wait for the response. This must
+ *	have user context (it sleeps). This routine is generic in that it
+ *	can send any type of command. Its purpose is to wait for that command
+ *	to complete (as opposed to initiating the command then returning).
+ */
+
+static int stli_cmdwait(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback)
+{
+	int	rc;
+
+#if DEBUG
+	printf("stli_cmdwait(brdp=%x,portp=%x,cmd=%x,arg=%x,size=%d,"
+		"copyback=%d)\n", (int) brdp, (int) portp, (int) cmd,
+		(int) arg, size, copyback);
+#endif
+
+	disable_intr();
+	while (portp->state & ST_CMDING) {
+		rc = tsleep(&portp->state, (TTIPRI | PCATCH), "stliraw", 0);
+		if (rc) {
+			enable_intr();
+			return(rc);
+		}
+	}
+
+	stli_sendcmd(brdp, portp, cmd, arg, size, copyback);
+
+	while (portp->state & ST_CMDING) {
+		rc = tsleep(&portp->state, (TTIPRI | PCATCH), "stliraw", 0);
+		if (rc) {
+			enable_intr();
+			return(rc);
+		}
+	}
+	enable_intr();
+
+	if (portp->rc != 0)
+		return(EIO);
+	return(0);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Start (or continue) the transfer of TX data on this port. If the
+ *	port is not currently busy then load up the interrupt ring queue
+ *	buffer and kick of the transmitter. If the port is running low on
+ *	TX data then refill the ring queue. This routine is also used to
+ *	activate input flow control!
+ */
+
+static void stli_start(struct tty *tp)
+{
+	volatile cdkasy_t	*ap;
+	volatile cdkhdr_t	*hdrp;
+	volatile unsigned char	*bits;
+	unsigned char		*shbuf;
+	stliport_t		*portp;
+	stlibrd_t		*brdp;
+	unsigned int		len, stlen, head, tail, size;
+	int			count, x;
+
+	portp = (stliport_t *) tp;
+
+#if DEBUG
+	printf("stli_start(tp=%x): brdnr=%d portnr=%d\n", (int) tp, 
+		portp->brdnr, portp->portnr);
+#endif
+
+	x = spltty();
+
+#if VFREEBSD == 205
+/*
+ *	Check if the output cooked clist buffers are near empty, wake up
+ *	the line discipline to fill it up.
+ */
+	if (tp->t_outq.c_cc <= tp->t_lowat) {
+		if (tp->t_state & TS_ASLEEP) {
+			tp->t_state &= ~TS_ASLEEP;
+			wakeup(&tp->t_outq);
+		}
+		selwakeup(&tp->t_wsel);
+	}
+#endif
+
+	if (tp->t_state & (TS_TIMEOUT | TS_TTSTOP)) {
+		splx(x);
+		return;
+	}
+
+/*
+ *	Copy data from the clists into the interrupt ring queue. This will
+ *	require at most 2 copys... What we do is calculate how many chars
+ *	can fit into the ring queue, and how many can fit in 1 copy. If after
+ *	the first copy there is still more room then do the second copy. 
+ */
+	if (tp->t_outq.c_cc != 0) {
+		brdp = stli_brds[portp->brdnr];
+		if (brdp == (stlibrd_t *) NULL) {
+			splx(x);
+			return;
+		}
+
+		disable_intr();
+		EBRDENABLE(brdp);
+		ap = (volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr);
+		head = (unsigned int) ap->txq.head;
+		tail = (unsigned int) ap->txq.tail;
+		if (tail != ((unsigned int) ap->txq.tail))
+			tail = (unsigned int) ap->txq.tail;
+		size = portp->txsize;
+		if (head >= tail) {
+			len = size - (head - tail) - 1;
+			stlen = size - head;
+		} else {
+			len = tail - head - 1;
+			stlen = len;
+		}
+
+		count = 0;
+		shbuf = (char *) EBRDGETMEMPTR(brdp, portp->txoffset);
+
+		if (len > 0) {
+			stlen = MIN(len, stlen);
+			count = q_to_b(&tp->t_outq, (shbuf + head), stlen);
+			len -= count;
+			head += count;
+			if (head >= size) {
+				head = 0;
+				if (len > 0) {
+					stlen = q_to_b(&tp->t_outq, shbuf, len);
+					head += stlen;
+					count += stlen;
+				}
+			}
+		}
+
+		ap = (volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr);
+		ap->txq.head = head;
+		hdrp = (volatile cdkhdr_t *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
+		bits = ((volatile unsigned char *) hdrp) + brdp->slaveoffset +
+			portp->portidx;
+		*bits |= portp->portbit;
+		portp->state |= ST_TXBUSY;
+		tp->t_state |= TS_BUSY;
+
+		EBRDDISABLE(brdp);
+		enable_intr();
+	}
+
+#if VFREEBSD != 205
+/*
+ *	Do any writer wakeups.
+ */
+	ttwwakeup(tp);
+#endif
+
+	splx(x);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Send a new port configuration to the slave.
+ */
+
+static int stli_param(struct tty *tp, struct termios *tiosp)
+{
+	stlibrd_t	*brdp;
+	stliport_t	*portp;
+	asyport_t	aport;
+	int		x, rc;
+
+	portp = (stliport_t *) tp;
+	if ((brdp = stli_brds[portp->brdnr]) == (stlibrd_t *) NULL)
+		return(ENXIO);
+
+	x = spltty();
+	stli_mkasyport(portp, &aport, tiosp);
+	/* can we sleep here? */
+	rc = stli_cmdwait(brdp, portp, A_SETPORT, &aport, sizeof(asyport_t), 0);
+	stli_ttyoptim(portp, tiosp);
+	splx(x);
+	return(rc);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Flush characters from the lower buffer. We may not have user context
+ *	so we cannot sleep waiting for it to complete. Also we need to check
+ *	if there is chars for this port in the TX cook buffer, and flush them
+ *	as well.
+ */
+
+static void stli_flush(stliport_t *portp, int flag)
+{
+	stlibrd_t	*brdp;
+	unsigned long	ftype;
+
+#if DEBUG
+	printf("stli_flush(portp=%x,flag=%x)\n", (int) portp, flag);
+#endif
+
+	if (portp == (stliport_t *) NULL)
+		return;
+	if ((portp->brdnr < 0) || (portp->brdnr >= stli_nrbrds))
+		return;
+	brdp = stli_brds[portp->brdnr];
+	if (brdp == (stlibrd_t *) NULL)
+		return;
+
+	disable_intr();
+	if (portp->state & ST_CMDING) {
+		portp->state |= (flag & FWRITE) ? ST_DOFLUSHTX : 0;
+		portp->state |= (flag & FREAD) ? ST_DOFLUSHRX : 0;
+	} else {
+		ftype = (flag & FWRITE) ? FLUSHTX : 0;
+		ftype |= (flag & FREAD) ? FLUSHRX : 0;
+		portp->state &= ~(ST_DOFLUSHTX | ST_DOFLUSHRX);
+		stli_sendcmd(brdp, portp, A_FLUSH, &ftype,
+			sizeof(unsigned long), 0);
+	}
+	if ((flag & FREAD) && (stli_rxtmpport == portp))
+		stli_rxtmplen = 0;
+	enable_intr();
+}
+
+/*****************************************************************************/
+
+/*
+ *	Generic send command routine. This will send a message to the slave,
+ *	of the specified type with the specified argument. Must be very
+ *	carefull of data that will be copied out from shared memory -
+ *	containing command results. The command completion is all done from
+ *	a poll routine that does not have user coontext. Therefore you cannot
+ *	copy back directly into user space, or to the kernel stack of a
+ *	process. This routine does not sleep, so can be called from anywhere,
+ *	and must be called with interrupt locks set.
+ */
+
+static void stli_sendcmd(stlibrd_t *brdp, stliport_t *portp, unsigned long cmd, void *arg, int size, int copyback)
+{
+	volatile cdkhdr_t	*hdrp;
+	volatile cdkctrl_t	*cp;
+	volatile unsigned char	*bits;
+
+#if DEBUG
+	printf("stli_sendcmd(brdp=%x,portp=%x,cmd=%x,arg=%x,size=%d,"
+		"copyback=%d)\n", (int) brdp, (int) portp, (int) cmd,
+		(int) arg, size, copyback);
+#endif
+
+	if (portp->state & ST_CMDING) {
+		printf("STALLION: command already busy, cmd=%x!\n", (int) cmd);
+		return;
+	}
+
+	EBRDENABLE(brdp);
+	cp = &((volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr))->ctrl;
+	if (size > 0) {
+		bcopy(arg, (void *) &(cp->args[0]), size);
+		if (copyback) {
+			portp->argp = arg;
+			portp->argsize = size;
+		}
+	}
+	cp->status = 0;
+	cp->cmd = cmd;
+	hdrp = (volatile cdkhdr_t *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
+	bits = ((volatile unsigned char *) hdrp) + brdp->slaveoffset +
+		portp->portidx;
+	*bits |= portp->portbit;
+	portp->state |= ST_CMDING;
+	EBRDDISABLE(brdp);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Read data from shared memory. This assumes that the shared memory
+ *	is enabled and that interrupts are off. Basically we just empty out
+ *	the shared memory buffer into the tty buffer. Must be carefull to
+ *	handle the case where we fill up the tty buffer, but still have
+ *	more chars to unload.
+ */
+
+static void stli_rxprocess(stlibrd_t *brdp, stliport_t *portp)
+{
+	volatile cdkasyrq_t	*rp;
+	volatile char		*shbuf;
+	struct tty		*tp;
+	unsigned int		head, tail, size;
+	unsigned int		len, stlen, i;
+	int			ch;
+
+#if DEBUG
+	printf("stli_rxprocess(brdp=%x,portp=%d)\n", (int) brdp, (int) portp);
+#endif
+
+	tp = &portp->tty;
+	if ((tp->t_state & TS_ISOPEN) == 0) {
+		stli_flush(portp, FREAD);
+		return;
+	}
+	if (tp->t_state & TS_TBLOCK)
+		return;
+
+	rp = &((volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr))->rxq;
+	head = (unsigned int) rp->head;
+	if (head != ((unsigned int) rp->head))
+		head = (unsigned int) rp->head;
+	tail = (unsigned int) rp->tail;
+	size = portp->rxsize;
+	if (head >= tail) {
+		len = head - tail;
+		stlen = len;
+	} else {
+		len = size - (tail - head);
+		stlen = size - tail;
+	}
+
+	if (len == 0)
+		return;
+
+	shbuf = (volatile char *) EBRDGETMEMPTR(brdp, portp->rxoffset);
+
+/*
+ *	If we can bypass normal LD processing then just copy direct
+ *	from board shared memory into the tty buffers.
+ */
+	if (tp->t_state & TS_CAN_BYPASS_L_RINT) {
+		if (((tp->t_rawq.c_cc + len) >= TTYHOG) &&
+		    ((tp->t_cflag & CRTS_IFLOW) || (tp->t_iflag & IXOFF)) &&
+		    ((tp->t_state & TS_TBLOCK) == 0)) {
+			ch = TTYHOG - tp->t_rawq.c_cc - 1;
+			len = (ch > 0) ? ch : 0;
+			stlen = MIN(stlen, len);
+			tp->t_state |= TS_TBLOCK;
+		}
+		i = b_to_q((char *) (shbuf + tail), stlen, &tp->t_rawq);
+		tail += stlen;
+		len -= stlen;
+		if (tail >= size) {
+			tail = 0;
+			i += b_to_q((char *) shbuf, len, &tp->t_rawq);
+			tail += len;
+		}
+		portp->rxlost += i;
+		ttwakeup(tp);
+		rp = &((volatile cdkasy_t *)
+			EBRDGETMEMPTR(brdp, portp->addr))->rxq;
+		rp->tail = tail;
+
+	} else {
+/*
+ *		Copy the data from board shared memory into a local
+ *		memory buffer. Then feed them from here into the LD.
+ *		We don't want to go into board shared memory one char
+ *		at a time, it is too slow...
+ */
+		if (len > TTYHOG) {
+			len = TTYHOG - 1;
+			stlen = min(len, stlen);
+		}
+		stli_rxtmpport = portp;
+		stli_rxtmplen = len;
+		bcopy((char *) (shbuf + tail), &stli_rxtmpbuf[0], stlen);
+		len -= stlen;
+		if (len > 0)
+			bcopy((char *) shbuf, &stli_rxtmpbuf[stlen], len);
+		
+		for (i = 0; (i < stli_rxtmplen); i++) {
+			ch = (unsigned char) stli_rxtmpbuf[i];
+			(*linesw[tp->t_line].l_rint)(ch, tp);
+		}
+		EBRDENABLE(brdp);
+		rp = &((volatile cdkasy_t *)
+			EBRDGETMEMPTR(brdp, portp->addr))->rxq;
+		if (stli_rxtmplen == 0) {
+			head = (unsigned int) rp->head;
+			if (head != ((unsigned int) rp->head))
+				head = (unsigned int) rp->head;
+			tail = head;
+		} else {
+			tail += i;
+			if (tail >= size)
+				tail -= size;
+		}
+		rp->tail = tail;
+		stli_rxtmpport = (stliport_t *) NULL;
+		stli_rxtmplen = 0;
+	}
+
+	portp->state |= ST_RXING;
+}
+
+/*****************************************************************************/
+
+/*
+ *	Set up and carry out any delayed commands. There is only a small set
+ *	of slave commands that can be done "off-level". So it is not too
+ *	difficult to deal with them as a special case here.
+ */
+
+static inline void stli_dodelaycmd(stliport_t *portp, volatile cdkctrl_t *cp)
+{
+	int	cmd;
+
+	if (portp->state & ST_DOSIGS) {
+		if ((portp->state & ST_DOFLUSHTX) &&
+		    (portp->state & ST_DOFLUSHRX))
+			cmd = A_SETSIGNALSF;
+		else if (portp->state & ST_DOFLUSHTX)
+			cmd = A_SETSIGNALSFTX;
+		else if (portp->state & ST_DOFLUSHRX)
+			cmd = A_SETSIGNALSFRX;
+		else
+			cmd = A_SETSIGNALS;
+		portp->state &= ~(ST_DOFLUSHTX | ST_DOFLUSHRX | ST_DOSIGS);
+		bcopy((void *) &portp->asig, (void *) &(cp->args[0]),
+			sizeof(asysigs_t));
+		cp->status = 0;
+		cp->cmd = cmd;
+		portp->state |= ST_CMDING;
+	} else if ((portp->state & ST_DOFLUSHTX) ||
+	    (portp->state & ST_DOFLUSHRX)) {
+		cmd = ((portp->state & ST_DOFLUSHTX) ? FLUSHTX : 0);
+		cmd |= ((portp->state & ST_DOFLUSHRX) ? FLUSHRX : 0);
+		portp->state &= ~(ST_DOFLUSHTX | ST_DOFLUSHRX);
+		bcopy((void *) &cmd, (void *) &(cp->args[0]), sizeof(int));
+		cp->status = 0;
+		cp->cmd = A_FLUSH;
+		portp->state |= ST_CMDING;
+	}
+}
+
+/*****************************************************************************/
+
+/*
+ *	Host command service checking. This handles commands or messages
+ *	coming from the slave to the host. Must have board shared memory
+ *	enabled and interrupts off when called. Notice that by servicing the
+ *	read data last we don't need to change the shared memory pointer
+ *	during processing (which is a slow IO operation).
+ *	Return value indicates if this port is still awaiting actions from
+ *	the slave (like open, command, or even TX data being sent). If 0
+ *	then port is still busy, otherwise the port request bit flag is
+ *	returned.
+ */
+
+static inline int stli_hostcmd(stlibrd_t *brdp, stliport_t *portp)
+{
+	volatile cdkasy_t	*ap;
+	volatile cdkctrl_t	*cp;
+	asynotify_t		nt;
+	unsigned long		oldsigs;
+	unsigned int		head, tail;
+	int			rc, donerx;
+
+#if DEBUG
+	printf("stli_hostcmd(brdp=%x,portp=%x)\n", (int) brdp, (int) portp);
+#endif
+
+	ap = (volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr);
+	cp = &ap->ctrl;
+
+/*
+ *	Check if we are waiting for an open completion message.
+ */
+	if (portp->state & ST_OPENING) {
+		rc = (int) cp->openarg;
+		if ((cp->open == 0) && (rc != 0)) {
+			if (rc > 0)
+				rc--;
+			cp->openarg = 0;
+			portp->rc = rc;
+			portp->state &= ~ST_OPENING;
+			wakeup(&portp->state);
+		}
+	}
+
+/*
+ *	Check if we are waiting for a close completion message.
+ */
+	if (portp->state & ST_CLOSING) {
+		rc = (int) cp->closearg;
+		if ((cp->close == 0) && (rc != 0)) {
+			if (rc > 0)
+				rc--;
+			cp->closearg = 0;
+			portp->rc = rc;
+			portp->state &= ~ST_CLOSING;
+			wakeup(&portp->state);
+		}
+	}
+
+/*
+ *	Check if we are waiting for a command completion message. We may
+ *	need to copy out the command results associated with this command.
+ */
+	if (portp->state & ST_CMDING) {
+		rc = cp->status;
+		if ((cp->cmd == 0) && (rc != 0)) {
+			if (rc > 0)
+				rc--;
+			if (portp->argp != (void *) NULL) {
+				bcopy((void *) &(cp->args[0]), portp->argp,
+					portp->argsize);
+				portp->argp = (void *) NULL;
+			}
+			cp->status = 0;
+			portp->rc = rc;
+			portp->state &= ~ST_CMDING;
+			stli_dodelaycmd(portp, cp);
+			wakeup(&portp->state);
+		}
+	}
+
+/*
+ *	Check for any notification messages ready. This includes lots of
+ *	different types of events - RX chars ready, RX break received,
+ *	TX data low or empty in the slave, modem signals changed state.
+ *	Must be extremely carefull if we call to the LD, it may call
+ *	other routines of ours that will disable the memory...
+ *	Something else we need to be carefull of is race conditions on
+ *	marking the TX as empty...
+ */
+	donerx = 0;
+
+	if (ap->notify) {
+		struct tty	*tp;
+
+		nt = ap->changed;
+		ap->notify = 0;
+		tp = &portp->tty;
+
+		if (nt.signal & SG_DCD) {
+			oldsigs = portp->sigs;
+			portp->sigs = stli_mktiocm(nt.sigvalue);
+			portp->state &= ~ST_GETSIGS;
+			(*linesw[tp->t_line].l_modem)(tp,
+				(portp->sigs & TIOCM_CD));
+			EBRDENABLE(brdp);
+		}
+		if (nt.data & DT_RXBUSY) {
+			donerx++;
+			stli_rxprocess(brdp, portp);
+		}
+		if (nt.data & DT_RXBREAK) {
+			(*linesw[tp->t_line].l_rint)(TTY_BI, tp);
+			EBRDENABLE(brdp);
+		}
+		if (nt.data & DT_TXEMPTY) {
+			ap = (volatile cdkasy_t *)
+				EBRDGETMEMPTR(brdp, portp->addr);
+			head = (unsigned int) ap->txq.head;
+			tail = (unsigned int) ap->txq.tail;
+			if (tail != ((unsigned int) ap->txq.tail))
+				tail = (unsigned int) ap->txq.tail;
+			head = (head >= tail) ? (head - tail) :
+				portp->txsize - (tail - head);
+			if (head == 0) {
+				portp->state &= ~ST_TXBUSY;
+				tp->t_state &= ~TS_BUSY;
+			}
+		}
+		if (nt.data & (DT_TXEMPTY | DT_TXLOW)) {
+			(*linesw[tp->t_line].l_start)(tp);
+			EBRDENABLE(brdp);
+		}
+	}
+
+/*
+ *	It might seem odd that we are checking for more RX chars here.
+ *	But, we need to handle the case where the tty buffer was previously
+ *	filled, but we had more characters to pass up. The slave will not
+ *	send any more RX notify messages until the RX buffer has been emptied.
+ *	But it will leave the service bits on (since the buffer is not empty).
+ *	So from here we can try to process more RX chars.
+ */
+	if ((!donerx) && (portp->state & ST_RXING)) {
+		portp->state &= ~ST_RXING;
+		stli_rxprocess(brdp, portp);
+	}
+
+	return((portp->state & (ST_OPENING | ST_CLOSING | ST_CMDING |
+		ST_TXBUSY | ST_RXING)) ? 0 : 1);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Service all ports on a particular board. Assumes that the boards
+ *	shared memory is enabled, and that the page pointer is pointed
+ *	at the cdk header structure.
+ */
+
+static inline void stli_brdpoll(stlibrd_t *brdp, volatile cdkhdr_t *hdrp)
+{
+	stliport_t	*portp;
+	unsigned char	hostbits[(STL_MAXCHANS / 8) + 1];
+	unsigned char	slavebits[(STL_MAXCHANS / 8) + 1];
+	unsigned char	*slavep;
+	int		bitpos, bitat, bitsize;
+	int 		channr, nrdevs, slavebitchange;
+
+	bitsize = brdp->bitsize;
+	nrdevs = brdp->nrdevs;
+
+/*
+ *	Check if slave wants any service. Basically we try to do as
+ *	little work as possible here. There are 2 levels of service
+ *	bits. So if there is nothing to do we bail early. We check
+ *	8 service bits at a time in the inner loop, so we can bypass
+ *	the lot if none of them want service.
+ */
+	bcopy((((unsigned char *) hdrp) + brdp->hostoffset), &hostbits[0],
+		bitsize);
+
+	bzero(&slavebits[0], bitsize);
+	slavebitchange = 0;
+
+	for (bitpos = 0; (bitpos < bitsize); bitpos++) {
+		if (hostbits[bitpos] == 0)
+			continue;
+		channr = bitpos * 8;
+		bitat = 0x1;
+		for (; (channr < nrdevs); channr++, bitat <<=1) {
+			if (hostbits[bitpos] & bitat) {
+				portp = brdp->ports[(channr - 1)];
+				if (stli_hostcmd(brdp, portp)) {
+					slavebitchange++;
+					slavebits[bitpos] |= bitat;
+				}
+			}
+		}
+	}
+
+/*
+ *	If any of the ports are no longer busy then update them in the
+ *	slave request bits. We need to do this after, since a host port
+ *	service may initiate more slave requests...
+ */
+	if (slavebitchange) {
+		hdrp = (volatile cdkhdr_t *)
+			EBRDGETMEMPTR(brdp, CDK_CDKADDR);
+		slavep = ((unsigned char *) hdrp) + brdp->slaveoffset;
+		for (bitpos = 0; (bitpos < bitsize); bitpos++) {
+			if (slavebits[bitpos])
+				slavep[bitpos] &= ~slavebits[bitpos];
+		}
+	}
+}
+
+/*****************************************************************************/
+
+/*
+ *	Driver poll routine. This routine polls the boards in use and passes
+ *	messages back up to host when neccesary. This is actually very
+ *	CPU efficient, since we will always have the kernel poll clock, it
+ *	adds only a few cycles when idle (since board service can be
+ *	determined very easily), but when loaded generates no interrupts
+ *	(with their expensive associated context change).
+ */
+
+static void stli_poll(void *arg)
+{
+	volatile cdkhdr_t	*hdrp;
+	stlibrd_t		*brdp;
+	int 			brdnr;
+
+	disable_intr();
+
+/*
+ *	Check each board and do any servicing required.
+ */
+	for (brdnr = 0; (brdnr < stli_nrbrds); brdnr++) {
+		brdp = stli_brds[brdnr];
+		if (brdp == (stlibrd_t *) NULL)
+			continue;
+		if ((brdp->state & BST_STARTED) == 0)
+			continue;
+
+		EBRDENABLE(brdp);
+		hdrp = (volatile cdkhdr_t *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
+		if (hdrp->hostreq)
+			stli_brdpoll(brdp, hdrp);
+		EBRDDISABLE(brdp);
+	}
+	enable_intr();
+
+	timeout(stli_poll, 0, 1);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Translate the termios settings into the port setting structure of
+ *	the slave.
+ */
+
+static void stli_mkasyport(stliport_t *portp, asyport_t *pp, struct termios *tiosp)
+{
+#if DEBUG
+	printf("stli_mkasyport(portp=%x,pp=%x,tiosp=%d)\n", (int) portp,
+		(int) pp, (int) tiosp);
+#endif
+
+	bzero(pp, sizeof(asyport_t));
+
+/*
+ *	Start of by setting the baud, char size, parity and stop bit info.
+ */
+	if (tiosp->c_ispeed == 0)
+		tiosp->c_ispeed = tiosp->c_ospeed;
+	if ((tiosp->c_ospeed < 0) || (tiosp->c_ospeed > STL_MAXBAUD))
+		tiosp->c_ospeed = STL_MAXBAUD;
+	pp->baudout = tiosp->c_ospeed;
+	pp->baudin = pp->baudout;
+
+	switch (tiosp->c_cflag & CSIZE) {
+	case CS5:
+		pp->csize = 5;
+		break;
+	case CS6:
+		pp->csize = 6;
+		break;
+	case CS7:
+		pp->csize = 7;
+		break;
+	default:
+		pp->csize = 8;
+		break;
+	}
+
+	if (tiosp->c_cflag & CSTOPB)
+		pp->stopbs = PT_STOP2;
+	else
+		pp->stopbs = PT_STOP1;
+
+	if (tiosp->c_cflag & PARENB) {
+		if (tiosp->c_cflag & PARODD)
+			pp->parity = PT_ODDPARITY;
+		else
+			pp->parity = PT_EVENPARITY;
+	} else {
+		pp->parity = PT_NOPARITY;
+	}
+
+	if (tiosp->c_iflag & ISTRIP)
+		pp->iflag |= FI_ISTRIP;
+
+/*
+ *	Set up any flow control options enabled.
+ */
+	if (tiosp->c_iflag & IXON) {
+		pp->flow |= F_IXON;
+		if (tiosp->c_iflag & IXANY)
+			pp->flow |= F_IXANY;
+	}
+	if (tiosp->c_iflag & IXOFF)
+		pp->flow |= F_IXOFF;
+	if (tiosp->c_cflag & CCTS_OFLOW)
+		pp->flow |= F_CTSFLOW;
+	if (tiosp->c_cflag & CRTS_IFLOW)
+		pp->flow |= F_RTSFLOW;
+
+	pp->startin = tiosp->c_cc[VSTART];
+	pp->stopin = tiosp->c_cc[VSTOP];
+	pp->startout = tiosp->c_cc[VSTART];
+	pp->stopout = tiosp->c_cc[VSTOP];
+
+/*
+ *	Set up the RX char marking mask with those RX error types we must
+ *	catch. We can get the slave to help us out a little here, it will
+ *	ignore parity errors and breaks for us, and mark parity errors in
+ *	the data stream.
+ */
+	if (tiosp->c_iflag & IGNPAR)
+		pp->iflag |= FI_IGNRXERRS;
+	if (tiosp->c_iflag & IGNBRK)
+		pp->iflag |= FI_IGNBREAK;
+	if (tiosp->c_iflag & (INPCK | PARMRK))
+		pp->iflag |= FI_1MARKRXERRS;
+
+/*
+ *	Transfer any persistent flags into the asyport structure.
+ */
+	pp->pflag = portp->pflag;
+}
+
+/*****************************************************************************/
+
+/*
+ *	Construct a slave signals structure for setting the DTR and RTS
+ *	signals as specified.
+ */
+
+static void stli_mkasysigs(asysigs_t *sp, int dtr, int rts)
+{
+#if DEBUG
+	printf("stli_mkasysigs(sp=%x,dtr=%d,rts=%d)\n", (int) sp, dtr, rts);
+#endif
+
+	bzero(sp, sizeof(asysigs_t));
+	if (dtr >= 0) {
+		sp->signal |= SG_DTR;
+		sp->sigvalue |= ((dtr > 0) ? SG_DTR : 0);
+	}
+	if (rts >= 0) {
+		sp->signal |= SG_RTS;
+		sp->sigvalue |= ((rts > 0) ? SG_RTS : 0);
+	}
+}
+
+/*****************************************************************************/
+
+/*
+ *	Convert the signals returned from the slave into a local TIOCM type
+ *	signals value. We keep them localy in TIOCM format.
+ */
+
+static long stli_mktiocm(unsigned long sigvalue)
+{
+	long	tiocm;
+
+#if DEBUG
+	printf("stli_mktiocm(sigvalue=%x)\n", (int) sigvalue);
+#endif
+
+	tiocm = 0;
+	tiocm |= ((sigvalue & SG_DCD) ? TIOCM_CD : 0);
+	tiocm |= ((sigvalue & SG_CTS) ? TIOCM_CTS : 0);
+	tiocm |= ((sigvalue & SG_RI) ? TIOCM_RI : 0);
+	tiocm |= ((sigvalue & SG_DSR) ? TIOCM_DSR : 0);
+	tiocm |= ((sigvalue & SG_DTR) ? TIOCM_DTR : 0);
+	tiocm |= ((sigvalue & SG_RTS) ? TIOCM_RTS : 0);
+	return(tiocm);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Enable l_rint processing bypass mode if tty modes allow it.
+ */
+
+static void stli_ttyoptim(stliport_t *portp, struct termios *tiosp)
+{
+	struct tty	*tp;
+
+	tp = &portp->tty;
+	if (((tiosp->c_iflag & (ICRNL | IGNCR | IMAXBEL | INLCR)) == 0) &&
+	    (((tiosp->c_iflag & BRKINT) == 0) || (tiosp->c_iflag & IGNBRK)) &&
+	    (((tiosp->c_iflag & PARMRK) == 0) ||
+		((tiosp->c_iflag & (IGNPAR | IGNBRK)) == (IGNPAR | IGNBRK))) &&
+	    ((tiosp->c_lflag & (ECHO | ICANON | IEXTEN | ISIG | PENDIN)) ==0) &&
+	    (linesw[tp->t_line].l_rint == ttyinput))
+		tp->t_state |= TS_CAN_BYPASS_L_RINT;
+	else
+		tp->t_state &= ~TS_CAN_BYPASS_L_RINT;
+
+	if (tp->t_line == SLIPDISC)
+		portp->hotchar = 0xc0;
+	else if (tp->t_line == PPPDISC)
+		portp->hotchar = 0x7e;
+	else
+		portp->hotchar = 0;
+}
+
+/*****************************************************************************/
+
+/*
+ *	All panels and ports actually attached have been worked out. All
+ *	we need to do here is set up the appropriate per port data structures.
+ */
+
+static int stli_initports(stlibrd_t *brdp)
+{
+	stliport_t	*portp;
+	int		i, panelnr, panelport;
+
+#if DEBUG
+	printf("stli_initports(brdp=%x)\n", (int) brdp);
+#endif
+
+	for (i = 0, panelnr = 0, panelport = 0; (i < brdp->nrports); i++) {
+		portp = (stliport_t *) malloc(sizeof(stliport_t), M_TTYS,
+			M_NOWAIT);
+		if (portp == (stliport_t *) NULL) {
+			printf("STALLION: failed to allocate port structure\n");
+			continue;
+		}
+		bzero(portp, sizeof(stliport_t));
+
+		portp->portnr = i;
+		portp->brdnr = brdp->brdnr;
+		portp->panelnr = panelnr;
+		portp->initintios.c_ispeed = STL_DEFSPEED;
+		portp->initintios.c_ospeed = STL_DEFSPEED;
+		portp->initintios.c_cflag = STL_DEFCFLAG;
+		portp->initintios.c_iflag = 0;
+		portp->initintios.c_oflag = 0;
+		portp->initintios.c_lflag = 0;
+		bcopy(&ttydefchars[0], &portp->initintios.c_cc[0],
+			sizeof(portp->initintios.c_cc));
+		portp->initouttios = portp->initintios;
+		portp->dtrwait = 3 * hz;
+
+		panelport++;
+		if (panelport >= brdp->panels[panelnr]) {
+			panelport = 0;
+			panelnr++;
+		}
+		brdp->ports[i] = portp;
+	}
+
+	return(0);
+}
+
+/*****************************************************************************/
+
+/*
+ *	All the following routines are board specific hardware operations.
+ */
+
+static void stli_ecpinit(stlibrd_t *brdp)
+{
+	unsigned long	memconf;
+
+#if DEBUG
+	printf("stli_ecpinit(brdp=%d)\n", (int) brdp);
+#endif
+
+	outb((brdp->iobase + ECP_ATCONFR), ECP_ATSTOP);
+	DELAY(10);
+	outb((brdp->iobase + ECP_ATCONFR), ECP_ATDISABLE);
+	DELAY(100);
+
+	memconf = (brdp->paddr & ECP_ATADDRMASK) >> ECP_ATADDRSHFT;
+	outb((brdp->iobase + ECP_ATMEMAR), memconf);
+}
+
+/*****************************************************************************/
+
+static void stli_ecpenable(stlibrd_t *brdp)
+{	
+#if DEBUG
+	printf("stli_ecpenable(brdp=%x)\n", (int) brdp);
+#endif
+	outb((brdp->iobase + ECP_ATCONFR), ECP_ATENABLE);
+}
+
+/*****************************************************************************/
+
+static void stli_ecpdisable(stlibrd_t *brdp)
+{	
+#if DEBUG
+	printf("stli_ecpdisable(brdp=%x)\n", (int) brdp);
+#endif
+	outb((brdp->iobase + ECP_ATCONFR), ECP_ATDISABLE);
+}
+
+/*****************************************************************************/
+
+static char *stli_ecpgetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
+{	
+	void		*ptr;
+	unsigned char	val;
+
+#if DEBUG
+	printf("stli_ecpgetmemptr(brdp=%x,offset=%x)\n", (int) brdp,
+		(int) offset);
+#endif
+
+	if (offset > brdp->memsize) {
+		printf("STALLION: shared memory pointer=%x out of range at "
+			"line=%d(%d), brd=%d\n", (int) offset, line,
+			__LINE__, brdp->brdnr);
+		ptr = 0;
+		val = 0;
+	} else {
+		ptr = brdp->vaddr + (offset % ECP_ATPAGESIZE);
+		val = (unsigned char) (offset / ECP_ATPAGESIZE);
+	}
+	outb((brdp->iobase + ECP_ATMEMPR), val);
+	return(ptr);
+}
+
+/*****************************************************************************/
+
+static void stli_ecpreset(stlibrd_t *brdp)
+{	
+#if DEBUG
+	printf("stli_ecpreset(brdp=%x)\n", (int) brdp);
+#endif
+
+	outb((brdp->iobase + ECP_ATCONFR), ECP_ATSTOP);
+	DELAY(10);
+	outb((brdp->iobase + ECP_ATCONFR), ECP_ATDISABLE);
+	DELAY(500);
+}
+
+/*****************************************************************************/
+
+static void stli_ecpintr(stlibrd_t *brdp)
+{	
+#if DEBUG
+	printf("stli_ecpintr(brdp=%x)\n", (int) brdp);
+#endif
+	outb(brdp->iobase, 0x1);
+}
+
+/*****************************************************************************/
+
+/*
+ *	The following set of functions act on ECP EISA boards.
+ */
+
+static void stli_ecpeiinit(stlibrd_t *brdp)
+{
+	unsigned long	memconf;
+
+#if DEBUG
+	printf("stli_ecpeiinit(brdp=%x)\n", (int) brdp);
+#endif
+
+	outb((brdp->iobase + ECP_EIBRDENAB), 0x1);
+	outb((brdp->iobase + ECP_EICONFR), ECP_EISTOP);
+	DELAY(10);
+	outb((brdp->iobase + ECP_EICONFR), ECP_EIDISABLE);
+	DELAY(500);
+
+	memconf = (brdp->paddr & ECP_EIADDRMASKL) >> ECP_EIADDRSHFTL;
+	outb((brdp->iobase + ECP_EIMEMARL), memconf);
+	memconf = (brdp->paddr & ECP_EIADDRMASKH) >> ECP_EIADDRSHFTH;
+	outb((brdp->iobase + ECP_EIMEMARH), memconf);
+}
+
+/*****************************************************************************/
+
+static void stli_ecpeienable(stlibrd_t *brdp)
+{	
+	outb((brdp->iobase + ECP_EICONFR), ECP_EIENABLE);
+}
+
+/*****************************************************************************/
+
+static void stli_ecpeidisable(stlibrd_t *brdp)
+{	
+	outb((brdp->iobase + ECP_EICONFR), ECP_EIDISABLE);
+}
+
+/*****************************************************************************/
+
+static char *stli_ecpeigetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
+{	
+	void		*ptr;
+	unsigned char	val;
+
+#if DEBUG
+	printf("stli_ecpeigetmemptr(brdp=%x,offset=%x,line=%d)\n",
+		(int) brdp, (int) offset, line);
+#endif
+
+	if (offset > brdp->memsize) {
+		printf("STALLION: shared memory pointer=%x out of range at "
+			"line=%d(%d), brd=%d\n", (int) offset, line,
+			__LINE__, brdp->brdnr);
+		ptr = 0;
+		val = 0;
+	} else {
+		ptr = brdp->vaddr + (offset % ECP_EIPAGESIZE);
+		if (offset < ECP_EIPAGESIZE)
+			val = ECP_EIENABLE;
+		else
+			val = ECP_EIENABLE | 0x40;
+	}
+	outb((brdp->iobase + ECP_EICONFR), val);
+	return(ptr);
+}
+
+/*****************************************************************************/
+
+static void stli_ecpeireset(stlibrd_t *brdp)
+{	
+	outb((brdp->iobase + ECP_EICONFR), ECP_EISTOP);
+	DELAY(10);
+	outb((brdp->iobase + ECP_EICONFR), ECP_EIDISABLE);
+	DELAY(500);
+}
+
+/*****************************************************************************/
+
+/*
+ *	The following set of functions act on ECP MCA boards.
+ */
+
+static void stli_ecpmcenable(stlibrd_t *brdp)
+{	
+	outb((brdp->iobase + ECP_MCCONFR), ECP_MCENABLE);
+}
+
+/*****************************************************************************/
+
+static void stli_ecpmcdisable(stlibrd_t *brdp)
+{	
+	outb((brdp->iobase + ECP_MCCONFR), ECP_MCDISABLE);
+}
+
+/*****************************************************************************/
+
+static char *stli_ecpmcgetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
+{	
+	void		*ptr;
+	unsigned char	val;
+
+	if (offset > brdp->memsize) {
+		printf("STALLION: shared memory pointer=%x out of range at "
+			"line=%d(%d), brd=%d\n", (int) offset, line,
+			__LINE__, brdp->brdnr);
+		ptr = 0;
+		val = 0;
+	} else {
+		ptr = brdp->vaddr + (offset % ECP_MCPAGESIZE);
+		val = ((unsigned char) (offset / ECP_MCPAGESIZE)) | ECP_MCENABLE;
+	}
+	outb((brdp->iobase + ECP_MCCONFR), val);
+	return(ptr);
+}
+
+/*****************************************************************************/
+
+static void stli_ecpmcreset(stlibrd_t *brdp)
+{	
+	outb((brdp->iobase + ECP_MCCONFR), ECP_MCSTOP);
+	DELAY(10);
+	outb((brdp->iobase + ECP_MCCONFR), ECP_MCDISABLE);
+	DELAY(500);
+}
+
+/*****************************************************************************/
+
+/*
+ *	The following routines act on ONboards.
+ */
+
+static void stli_onbinit(stlibrd_t *brdp)
+{
+	unsigned long	memconf;
+	int		i;
+
+#if DEBUG
+	printf("stli_onbinit(brdp=%d)\n", (int) brdp);
+#endif
+
+	outb((brdp->iobase + ONB_ATCONFR), ONB_ATSTOP);
+	DELAY(10);
+	outb((brdp->iobase + ONB_ATCONFR), ONB_ATDISABLE);
+	for (i = 0; (i < 1000); i++)
+		DELAY(1000);
+
+	memconf = (brdp->paddr & ONB_ATADDRMASK) >> ONB_ATADDRSHFT;
+	outb((brdp->iobase + ONB_ATMEMAR), memconf);
+	outb(brdp->iobase, 0x1);
+	DELAY(1000);
+}
+
+/*****************************************************************************/
+
+static void stli_onbenable(stlibrd_t *brdp)
+{	
+#if DEBUG
+	printf("stli_onbenable(brdp=%x)\n", (int) brdp);
+#endif
+	outb((brdp->iobase + ONB_ATCONFR), (ONB_ATENABLE | brdp->confbits));
+}
+
+/*****************************************************************************/
+
+static void stli_onbdisable(stlibrd_t *brdp)
+{	
+#if DEBUG
+	printf("stli_onbdisable(brdp=%x)\n", (int) brdp);
+#endif
+	outb((brdp->iobase + ONB_ATCONFR), (ONB_ATDISABLE | brdp->confbits));
+}
+
+/*****************************************************************************/
+
+static char *stli_onbgetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
+{	
+	void	*ptr;
+
+#if DEBUG
+	printf("stli_onbgetmemptr(brdp=%x,offset=%x)\n", (int) brdp,
+		(int) offset);
+#endif
+
+	if (offset > brdp->memsize) {
+		printf("STALLION: shared memory pointer=%x out of range at "
+			"line=%d(%d), brd=%d\n", (int) offset, line,
+			__LINE__, brdp->brdnr);
+		ptr = 0;
+	} else {
+		ptr = brdp->vaddr + (offset % ONB_ATPAGESIZE);
+	}
+	return(ptr);
+}
+
+/*****************************************************************************/
+
+static void stli_onbreset(stlibrd_t *brdp)
+{	
+	int	i;
+
+#if DEBUG
+	printf("stli_onbreset(brdp=%x)\n", (int) brdp);
+#endif
+
+	outb((brdp->iobase + ONB_ATCONFR), ONB_ATSTOP);
+	DELAY(10);
+	outb((brdp->iobase + ONB_ATCONFR), ONB_ATDISABLE);
+	for (i = 0; (i < 1000); i++)
+		DELAY(1000);
+}
+
+/*****************************************************************************/
+
+/*
+ *	The following routines act on ONboard EISA.
+ */
+
+static void stli_onbeinit(stlibrd_t *brdp)
+{
+	unsigned long	memconf;
+	int		i;
+
+#if DEBUG
+	printf("stli_onbeinit(brdp=%d)\n", (int) brdp);
+#endif
+
+	outb((brdp->iobase + ONB_EIBRDENAB), 0x1);
+	outb((brdp->iobase + ONB_EICONFR), ONB_EISTOP);
+	DELAY(10);
+	outb((brdp->iobase + ONB_EICONFR), ONB_EIDISABLE);
+	for (i = 0; (i < 1000); i++)
+		DELAY(1000);
+
+	memconf = (brdp->paddr & ONB_EIADDRMASKL) >> ONB_EIADDRSHFTL;
+	outb((brdp->iobase + ONB_EIMEMARL), memconf);
+	memconf = (brdp->paddr & ONB_EIADDRMASKH) >> ONB_EIADDRSHFTH;
+	outb((brdp->iobase + ONB_EIMEMARH), memconf);
+	outb(brdp->iobase, 0x1);
+	DELAY(1000);
+}
+
+/*****************************************************************************/
+
+static void stli_onbeenable(stlibrd_t *brdp)
+{	
+#if DEBUG
+	printf("stli_onbeenable(brdp=%x)\n", (int) brdp);
+#endif
+	outb((brdp->iobase + ONB_EICONFR), ONB_EIENABLE);
+}
+
+/*****************************************************************************/
+
+static void stli_onbedisable(stlibrd_t *brdp)
+{	
+#if DEBUG
+	printf("stli_onbedisable(brdp=%x)\n", (int) brdp);
+#endif
+	outb((brdp->iobase + ONB_EICONFR), ONB_EIDISABLE);
+}
+
+/*****************************************************************************/
+
+static char *stli_onbegetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
+{	
+	void		*ptr;
+	unsigned char	val;
+
+#if DEBUG
+	printf("stli_onbegetmemptr(brdp=%x,offset=%x,line=%d)\n", (int) brdp,
+		(int) offset, line);
+#endif
+
+	if (offset > brdp->memsize) {
+		printf("STALLION: shared memory pointer=%x out of range at "
+			"line=%d(%d), brd=%d\n", (int) offset, line,
+			__LINE__, brdp->brdnr);
+		ptr = 0;
+		val = 0;
+	} else {
+		ptr = brdp->vaddr + (offset % ONB_EIPAGESIZE);
+		if (offset < ONB_EIPAGESIZE)
+			val = ONB_EIENABLE;
+		else
+			val = ONB_EIENABLE | 0x40;
+	}
+	outb((brdp->iobase + ONB_EICONFR), val);
+	return(ptr);
+}
+
+/*****************************************************************************/
+
+static void stli_onbereset(stlibrd_t *brdp)
+{	
+	int	i;
+
+#if DEBUG
+	printf("stli_onbereset(brdp=%x)\n", (int) brdp);
+#endif
+
+	outb((brdp->iobase + ONB_EICONFR), ONB_EISTOP);
+	DELAY(10);
+	outb((brdp->iobase + ONB_EICONFR), ONB_EIDISABLE);
+	for (i = 0; (i < 1000); i++)
+		DELAY(1000);
+}
+
+/*****************************************************************************/
+
+/*
+ *	The following routines act on Brumby boards.
+ */
+
+static void stli_bbyinit(stlibrd_t *brdp)
+{
+	int	i;
+
+#if DEBUG
+	printf("stli_bbyinit(brdp=%d)\n", (int) brdp);
+#endif
+
+	outb((brdp->iobase + BBY_ATCONFR), BBY_ATSTOP);
+	DELAY(10);
+	outb((brdp->iobase + BBY_ATCONFR), 0);
+	for (i = 0; (i < 1000); i++)
+		DELAY(1000);
+	outb(brdp->iobase, 0x1);
+	DELAY(1000);
+}
+
+/*****************************************************************************/
+
+static char *stli_bbygetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
+{	
+	void		*ptr;
+	unsigned char	val;
+
+#if DEBUG
+	printf("stli_bbygetmemptr(brdp=%x,offset=%x)\n", (int) brdp,
+		(int) offset);
+#endif
+
+	if (offset > brdp->memsize) {
+		printf("STALLION: shared memory pointer=%x out of range at "
+			"line=%d(%d), brd=%d\n", (int) offset, line,
+			__LINE__, brdp->brdnr);
+		ptr = 0;
+		val = 0;
+	} else {
+		ptr = brdp->vaddr + (offset % BBY_PAGESIZE);
+		val = (unsigned char) (offset / BBY_PAGESIZE);
+	}
+	outb((brdp->iobase + BBY_ATCONFR), val);
+	return(ptr);
+}
+
+/*****************************************************************************/
+
+static void stli_bbyreset(stlibrd_t *brdp)
+{	
+	int	i;
+
+#if DEBUG
+	printf("stli_bbyreset(brdp=%x)\n", (int) brdp);
+#endif
+
+	outb((brdp->iobase + BBY_ATCONFR), BBY_ATSTOP);
+	DELAY(10);
+	outb((brdp->iobase + BBY_ATCONFR), 0);
+	for (i = 0; (i < 1000); i++)
+		DELAY(1000);
+}
+
+/*****************************************************************************/
+
+/*
+ *	The following routines act on original old Stallion boards.
+ */
+
+static void stli_stalinit(stlibrd_t *brdp)
+{
+	int	i;
+
+#if DEBUG
+	printf("stli_stalinit(brdp=%d)\n", (int) brdp);
+#endif
+
+	outb(brdp->iobase, 0x1);
+	for (i = 0; (i < 1000); i++)
+		DELAY(1000);
+}
+
+/*****************************************************************************/
+
+static char *stli_stalgetmemptr(stlibrd_t *brdp, unsigned long offset, int line)
+{	
+	void	*ptr;
+
+#if DEBUG
+	printf("stli_stalgetmemptr(brdp=%x,offset=%x)\n", (int) brdp,
+		(int) offset);
+#endif
+
+	if (offset > brdp->memsize) {
+		printf("STALLION: shared memory pointer=%x out of range at "
+			"line=%d(%d), brd=%d\n", (int) offset, line,
+			__LINE__, brdp->brdnr);
+		ptr = 0;
+	} else {
+		ptr = brdp->vaddr + (offset % STAL_PAGESIZE);
+	}
+	return(ptr);
+}
+
+/*****************************************************************************/
+
+static void stli_stalreset(stlibrd_t *brdp)
+{	
+	volatile unsigned long	*vecp;
+	int			i;
+
+#if DEBUG
+	printf("stli_stalreset(brdp=%x)\n", (int) brdp);
+#endif
+
+	vecp = (volatile unsigned long *) (brdp->vaddr + 0x30);
+	*vecp = 0xffff0000;
+	outb(brdp->iobase, 0);
+	for (i = 0; (i < 1000); i++)
+		DELAY(1000);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Try to find an ECP board and initialize it. This handles only ECP
+ *	board types.
+ */
+
+static int stli_initecp(stlibrd_t *brdp)
+{
+	cdkecpsig_t	sig;
+	cdkecpsig_t	*sigsp;
+	unsigned int	status, nxtid;
+	int		panelnr;
+
+#if DEBUG
+	printf("stli_initecp(brdp=%x)\n", (int) brdp);
+#endif
+
+/*
+ *	Do a basic sanity check on the IO and memory addresses.
+ */
+	if ((brdp->iobase == 0) || (brdp->paddr == 0))
+		return(EINVAL);
+
+/*
+ *	Based on the specific board type setup the common vars to access
+ *	and enable shared memory. Set all board specific information now
+ *	as well.
+ */
+	switch (brdp->brdtype) {
+	case BRD_ECP:
+		brdp->memsize = ECP_MEMSIZE;
+		brdp->pagesize = ECP_ATPAGESIZE;
+		brdp->init = stli_ecpinit;
+		brdp->enable = stli_ecpenable;
+		brdp->reenable = stli_ecpenable;
+		brdp->disable = stli_ecpdisable;
+		brdp->getmemptr = stli_ecpgetmemptr;
+		brdp->intr = stli_ecpintr;
+		brdp->reset = stli_ecpreset;
+		break;
+
+	case BRD_ECPE:
+		brdp->memsize = ECP_MEMSIZE;
+		brdp->pagesize = ECP_EIPAGESIZE;
+		brdp->init = stli_ecpeiinit;
+		brdp->enable = stli_ecpeienable;
+		brdp->reenable = stli_ecpeienable;
+		brdp->disable = stli_ecpeidisable;
+		brdp->getmemptr = stli_ecpeigetmemptr;
+		brdp->intr = stli_ecpintr;
+		brdp->reset = stli_ecpeireset;
+		break;
+
+	case BRD_ECPMC:
+		brdp->memsize = ECP_MEMSIZE;
+		brdp->pagesize = ECP_MCPAGESIZE;
+		brdp->init = NULL;
+		brdp->enable = stli_ecpmcenable;
+		brdp->reenable = stli_ecpmcenable;
+		brdp->disable = stli_ecpmcdisable;
+		brdp->getmemptr = stli_ecpmcgetmemptr;
+		brdp->intr = stli_ecpintr;
+		brdp->reset = stli_ecpmcreset;
+		break;
+
+	default:
+		return(EINVAL);
+	}
+
+/*
+ *	The per-board operations structure is all setup, so now lets go
+ *	and get the board operational. Firstly initialize board configuration
+ *	registers.
+ */
+	EBRDINIT(brdp);
+
+/*
+ *	Now that all specific code is set up, enable the shared memory and
+ *	look for the a signature area that will tell us exactly what board
+ *	this is, and what it is connected to it.
+ */
+	EBRDENABLE(brdp);
+	sigsp = (cdkecpsig_t *) EBRDGETMEMPTR(brdp, CDK_SIGADDR);
+	bcopy(sigsp, &sig, sizeof(cdkecpsig_t));
+	EBRDDISABLE(brdp);
+
+#if 0
+	printf("%s(%d): sig-> magic=%x rom=%x panel=%x,%x,%x,%x,%x,%x,%x,%x\n",
+		__file__, __LINE__, (int) sig.magic, sig.romver,
+		sig.panelid[0], (int) sig.panelid[1], (int) sig.panelid[2],
+		(int) sig.panelid[3], (int) sig.panelid[4],
+		(int) sig.panelid[5], (int) sig.panelid[6],
+		(int) sig.panelid[7]);
+#endif
+
+	if (sig.magic != ECP_MAGIC)
+		return(ENXIO);
+
+/*
+ *	Scan through the signature looking at the panels connected to the
+ *	board. Calculate the total number of ports as we go.
+ */
+	for (panelnr = 0, nxtid = 0; (panelnr < STL_MAXPANELS); panelnr++) {
+		status = sig.panelid[nxtid];
+		if ((status & ECH_PNLIDMASK) != nxtid)
+			break;
+		brdp->panelids[panelnr] = status;
+		if (status & ECH_PNL16PORT) {
+			brdp->panels[panelnr] = 16;
+			brdp->nrports += 16;
+			nxtid += 2;
+		} else {
+			brdp->panels[panelnr] = 8;
+			brdp->nrports += 8;
+			nxtid++;
+		}
+		brdp->nrpanels++;
+	}
+
+	brdp->state |= BST_FOUND;
+	return(0);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Try to find an ONboard, Brumby or Stallion board and initialize it.
+ *	This handles only these board types.
+ */
+
+static int stli_initonb(stlibrd_t *brdp)
+{
+	cdkonbsig_t	sig;
+	cdkonbsig_t	*sigsp;
+	int		i;
+
+#if DEBUG
+	printf("stli_initonb(brdp=%x)\n", (int) brdp);
+#endif
+
+/*
+ *	Do a basic sanity check on the IO and memory addresses.
+ */
+	if ((brdp->iobase == 0) || (brdp->paddr == 0))
+		return(EINVAL);
+
+/*
+ *	Based on the specific board type setup the common vars to access
+ *	and enable shared memory. Set all board specific information now
+ *	as well.
+ */
+	switch (brdp->brdtype) {
+	case BRD_ONBOARD:
+	case BRD_ONBOARD32:
+	case BRD_ONBOARD2:
+	case BRD_ONBOARD2_32:
+	case BRD_ONBOARDRS:
+		brdp->memsize = ONB_MEMSIZE;
+		brdp->pagesize = ONB_ATPAGESIZE;
+		brdp->init = stli_onbinit;
+		brdp->enable = stli_onbenable;
+		brdp->reenable = stli_onbenable;
+		brdp->disable = stli_onbdisable;
+		brdp->getmemptr = stli_onbgetmemptr;
+		brdp->intr = stli_ecpintr;
+		brdp->reset = stli_onbreset;
+		brdp->confbits = (brdp->paddr > 0x100000) ? ONB_HIMEMENAB : 0;
+		break;
+
+	case BRD_ONBOARDE:
+		brdp->memsize = ONB_EIMEMSIZE;
+		brdp->pagesize = ONB_EIPAGESIZE;
+		brdp->init = stli_onbeinit;
+		brdp->enable = stli_onbeenable;
+		brdp->reenable = stli_onbeenable;
+		brdp->disable = stli_onbedisable;
+		brdp->getmemptr = stli_onbegetmemptr;
+		brdp->intr = stli_ecpintr;
+		brdp->reset = stli_onbereset;
+		break;
+
+	case BRD_BRUMBY4:
+	case BRD_BRUMBY8:
+	case BRD_BRUMBY16:
+		brdp->memsize = BBY_MEMSIZE;
+		brdp->pagesize = BBY_PAGESIZE;
+		brdp->init = stli_bbyinit;
+		brdp->enable = NULL;
+		brdp->reenable = NULL;
+		brdp->disable = NULL;
+		brdp->getmemptr = stli_bbygetmemptr;
+		brdp->intr = stli_ecpintr;
+		brdp->reset = stli_bbyreset;
+		break;
+
+	case BRD_STALLION:
+		brdp->memsize = STAL_MEMSIZE;
+		brdp->pagesize = STAL_PAGESIZE;
+		brdp->init = stli_stalinit;
+		brdp->enable = NULL;
+		brdp->reenable = NULL;
+		brdp->disable = NULL;
+		brdp->getmemptr = stli_stalgetmemptr;
+		brdp->intr = stli_ecpintr;
+		brdp->reset = stli_stalreset;
+		break;
+
+	default:
+		return(EINVAL);
+	}
+
+/*
+ *	The per-board operations structure is all setup, so now lets go
+ *	and get the board operational. Firstly initialize board configuration
+ *	registers.
+ */
+	EBRDINIT(brdp);
+
+/*
+ *	Now that all specific code is set up, enable the shared memory and
+ *	look for the a signature area that will tell us exactly what board
+ *	this is, and how many ports.
+ */
+	EBRDENABLE(brdp);
+	sigsp = (cdkonbsig_t *) EBRDGETMEMPTR(brdp, CDK_SIGADDR);
+	bcopy(sigsp, &sig, sizeof(cdkonbsig_t));
+	EBRDDISABLE(brdp);
+
+#if 0
+	printf("%s(%d): sig-> magic=%x:%x:%x:%x romver=%x amask=%x:%x:%x\n",
+		__file__, __LINE__, sig.magic0, sig.magic1, sig.magic2,
+		sig.magic3, sig.romver, sig.amask0, sig.amask1, sig.amask2);
+#endif
+
+	if ((sig.magic0 != ONB_MAGIC0) || (sig.magic1 != ONB_MAGIC1) ||
+	    (sig.magic2 != ONB_MAGIC2) || (sig.magic3 != ONB_MAGIC3))
+		return(ENXIO);
+
+/*
+ *	Scan through the signature alive mask and calculate how many ports
+ *	there are on this board.
+ */
+	brdp->nrpanels = 1;
+	if (sig.amask1) {
+		brdp->nrports = 32;
+	} else {
+		for (i = 0; (i < 16); i++) {
+			if (((sig.amask0 << i) & 0x8000) == 0)
+				break;
+		}
+		brdp->nrports = i;
+	}
+	brdp->panels[0] = brdp->nrports;
+
+	brdp->state |= BST_FOUND;
+	return(0);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Start up a running board. This routine is only called after the
+ *	code has been down loaded to the board and is operational. It will
+ *	read in the memory map, and get the show on the road...
+ */
+
+static int stli_startbrd(stlibrd_t *brdp)
+{
+	volatile cdkhdr_t	*hdrp;
+	volatile cdkmem_t	*memp;
+	volatile cdkasy_t	*ap;
+	stliport_t		*portp;
+	int			portnr, nrdevs, i, rc;
+
+#if DEBUG
+	printf("stli_startbrd(brdp=%x)\n", (int) brdp);
+#endif
+
+	rc = 0;
+
+	disable_intr();
+	EBRDENABLE(brdp);
+	hdrp = (volatile cdkhdr_t *) EBRDGETMEMPTR(brdp, CDK_CDKADDR);
+	nrdevs = hdrp->nrdevs;
+
+#if 0
+	printf("%s(%d): CDK version %d.%d.%d --> nrdevs=%d memp=%x hostp=%x "
+		"slavep=%x\n", __file__, __LINE__, hdrp->ver_release,
+		hdrp->ver_modification, hdrp->ver_fix, nrdevs,
+		(int) hdrp->memp, (int) hdrp->hostp, (int) hdrp->slavep);
+#endif
+
+	if (nrdevs < (brdp->nrports + 1)) {
+		printf("STALLION: slave failed to allocate memory for all "
+			"devices, devices=%d\n", nrdevs);
+		brdp->nrports = nrdevs - 1;
+	}
+	brdp->nrdevs = nrdevs;
+	brdp->hostoffset = hdrp->hostp - CDK_CDKADDR;
+	brdp->slaveoffset = hdrp->slavep - CDK_CDKADDR;
+	brdp->bitsize = (nrdevs + 7) / 8;
+	memp = (volatile cdkmem_t *) hdrp->memp;
+	if (((unsigned long) memp) > brdp->memsize) {
+		printf("STALLION: corrupted shared memory region?\n");
+		rc = EIO;
+		goto stli_donestartup;
+	}
+	memp = (volatile cdkmem_t *) EBRDGETMEMPTR(brdp, (unsigned long) memp);
+	if (memp->dtype != TYP_ASYNCTRL) {
+		printf("STALLION: no slave control device found\n");
+		rc = EIO;
+		goto stli_donestartup;
+	}
+	memp++;
+
+/*
+ *	Cycle through memory allocation of each port. We are guaranteed to
+ *	have all ports inside the first page of slave window, so no need to
+ *	change pages while reading memory map.
+ */
+	for (i = 1, portnr = 0; (i < nrdevs); i++, portnr++, memp++) {
+		if (memp->dtype != TYP_ASYNC)
+			break;
+		portp = brdp->ports[portnr];
+		if (portp == (stliport_t *) NULL)
+			break;
+		portp->devnr = i;
+		portp->addr = memp->offset;
+		portp->reqidx = (unsigned char) (i * 8 / nrdevs);
+		portp->reqbit = (unsigned char) (0x1 << portp->reqidx);
+		portp->portidx = (unsigned char) (i / 8);
+		portp->portbit = (unsigned char) (0x1 << (i % 8));
+	}
+
+	hdrp->slavereq = 0xff;
+
+/*
+ *	For each port setup a local copy of the RX and TX buffer offsets
+ *	and sizes. We do this separate from the above, because we need to
+ *	move the shared memory page...
+ */
+	for (i = 1, portnr = 0; (i < nrdevs); i++, portnr++) {
+		portp = brdp->ports[portnr];
+		if (portp == (stliport_t *) NULL)
+			break;
+		if (portp->addr == 0)
+			break;
+		ap = (volatile cdkasy_t *) EBRDGETMEMPTR(brdp, portp->addr);
+		if (ap != (volatile cdkasy_t *) NULL) {
+			portp->rxsize = ap->rxq.size;
+			portp->txsize = ap->txq.size;
+			portp->rxoffset = ap->rxq.offset;
+			portp->txoffset = ap->txq.offset;
+		}
+	}
+
+stli_donestartup:
+	EBRDDISABLE(brdp);
+	enable_intr();
+
+	if (rc == 0)
+		brdp->state |= BST_STARTED;
+
+	if (stli_doingtimeout == 0) {
+		timeout(stli_poll, 0, 1);
+		stli_doingtimeout++;
+	}
+
+	return(rc);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Probe and initialize the specified board.
+ */
+
+static int stli_brdinit(stlibrd_t *brdp)
+{
+#if DEBUG
+	printf("stli_brdinit(brdp=%x)\n", (int) brdp);
+#endif
+
+	stli_brds[brdp->brdnr] = brdp;
+
+	switch (brdp->brdtype) {
+	case BRD_ECP:
+	case BRD_ECPE:
+	case BRD_ECPMC:
+		stli_initecp(brdp);
+		break;
+	case BRD_ONBOARD:
+	case BRD_ONBOARDE:
+	case BRD_ONBOARD2:
+	case BRD_ONBOARD32:
+	case BRD_ONBOARD2_32:
+	case BRD_ONBOARDRS:
+	case BRD_BRUMBY4:
+	case BRD_BRUMBY8:
+	case BRD_BRUMBY16:
+	case BRD_STALLION:
+		stli_initonb(brdp);
+		break;
+	case BRD_EASYIO:
+	case BRD_ECH:
+	case BRD_ECHMC:
+	case BRD_ECHPCI:
+		printf("STALLION: %s board type not supported in this driver\n",
+			stli_brdnames[brdp->brdtype]);
+		return(ENODEV);
+	default:
+		printf("STALLION: unit=%d is unknown board type=%d\n",
+			brdp->brdnr, brdp->brdtype);
+		return(ENODEV);
+	}
+	return(0);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Finish off the remaining initialization for a board.
+ */
+
+static int stli_brdattach(stlibrd_t *brdp)
+{
+#if DEBUG
+	printf("stli_brdattach(brdp=%x)\n", (int) brdp);
+#endif
+
+#if 0
+	if ((brdp->state & BST_FOUND) == 0) {
+		printf("STALLION: %s board not found, unit=%d io=%x mem=%x\n",
+			stli_brdnames[brdp->brdtype], brdp->brdnr,
+			brdp->iobase, (int) brdp->paddr);
+		return(ENXIO);
+	}
+#endif
+
+	stli_initports(brdp);
+	printf("stli%d: %s (driver version %s), unit=%d nrpanels=%d "
+		"nrports=%d\n", brdp->unitid, stli_brdnames[brdp->brdtype],
+		stli_drvversion, brdp->brdnr, brdp->nrpanels, brdp->nrports);
+	return(0);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Check for possible shared memory sharing between boards.
+ *	FIX: need to start this optimization somewhere...
+ */
+
+static int stli_chksharemem()
+{
+	stlibrd_t	*brdp, *nxtbrdp;
+	int		i, j;
+
+#if DEBUG
+	printf("stli_chksharemem()\n");
+#endif
+
+/*
+ *	All found boards are initialized. Now for a little optimization, if
+ *	no boards are sharing the "shared memory" regions then we can just
+ *	leave them all enabled. This is in fact the usual case.
+ */
+	stli_shared = 0;
+	if (stli_nrbrds > 1) {
+		for (i = 0; (i < stli_nrbrds); i++) {
+			brdp = stli_brds[i];
+			if (brdp == (stlibrd_t *) NULL)
+				continue;
+			for (j = i + 1; (j < stli_nrbrds); j++) {
+				nxtbrdp = stli_brds[j];
+				if (nxtbrdp == (stlibrd_t *) NULL)
+					continue;
+				if ((brdp->paddr >= nxtbrdp->paddr) &&
+				    (brdp->paddr <= (nxtbrdp->paddr +
+				    nxtbrdp->memsize - 1))) {
+					stli_shared++;
+					break;
+				}
+			}
+		}
+	}
+
+	if (stli_shared == 0) {
+		for (i = 0; (i < stli_nrbrds); i++) {
+			brdp = stli_brds[i];
+			if (brdp == (stlibrd_t *) NULL)
+				continue;
+			if (brdp->state & BST_FOUND) {
+				EBRDENABLE(brdp);
+				brdp->enable = NULL;
+				brdp->disable = NULL;
+			}
+		}
+	}
+
+	return(0);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Return the board stats structure to user app.
+ */
+
+static int stli_getbrdstats(caddr_t data)
+{
+	stlibrd_t	*brdp;
+	int		i;
+
+#if DEBUG
+	printf("stli_getbrdstats(data=%x)\n", data);
+#endif
+
+	stli_brdstats = *((combrd_t *) data);
+	if (stli_brdstats.brd >= STL_MAXBRDS)
+		return(-ENODEV);
+	brdp = stli_brds[stli_brdstats.brd];
+	if (brdp == (stlibrd_t *) NULL)
+		return(-ENODEV);
+
+	bzero(&stli_brdstats, sizeof(combrd_t));
+	stli_brdstats.brd = brdp->brdnr;
+	stli_brdstats.type = brdp->brdtype;
+	stli_brdstats.hwid = 0;
+	stli_brdstats.state = brdp->state;
+	stli_brdstats.ioaddr = brdp->iobase;
+	stli_brdstats.memaddr = brdp->paddr;
+	stli_brdstats.nrpanels = brdp->nrpanels;
+	stli_brdstats.nrports = brdp->nrports;
+	for (i = 0; (i < brdp->nrpanels); i++) {
+		stli_brdstats.panels[i].panel = i;
+		stli_brdstats.panels[i].hwid = brdp->panelids[i];
+		stli_brdstats.panels[i].nrports = brdp->panels[i];
+	}
+
+	*((combrd_t *) data) = stli_brdstats;
+	return(0);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Resolve the referenced port number into a port struct pointer.
+ */
+
+static stliport_t *stli_getport(int brdnr, int panelnr, int portnr)
+{
+	stlibrd_t	*brdp;
+	int		i;
+
+	if ((brdnr < 0) || (brdnr >= STL_MAXBRDS))
+		return((stliport_t *) NULL);
+	brdp = stli_brds[brdnr];
+	if (brdp == (stlibrd_t *) NULL)
+		return((stliport_t *) NULL);
+	for (i = 0; (i < panelnr); i++)
+		portnr += brdp->panels[i];
+	if ((portnr < 0) || (portnr >= brdp->nrports))
+		return((stliport_t *) NULL);
+	return(brdp->ports[portnr]);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Return the port stats structure to user app. A NULL port struct
+ *	pointer passed in means that we need to find out from the app
+ *	what port to get stats for (used through board control device).
+ */
+
+static int stli_getportstats(stliport_t *portp, caddr_t data)
+{
+	stlibrd_t	*brdp;
+	int		rc;
+
+	if (portp == (stliport_t *) NULL) {
+		stli_comstats = *((comstats_t *) data);
+		portp = stli_getport(stli_comstats.brd, stli_comstats.panel,
+			stli_comstats.port);
+		if (portp == (stliport_t *) NULL)
+			return(-ENODEV);
+	}
+
+	brdp = stli_brds[portp->brdnr];
+	if (brdp == (stlibrd_t *) NULL)
+		return(-ENODEV);
+
+	if ((rc = stli_cmdwait(brdp, portp, A_GETSTATS, &stli_cdkstats,
+			sizeof(asystats_t), 1)) < 0)
+		return(rc);
+
+	stli_comstats.brd = portp->brdnr;
+	stli_comstats.panel = portp->panelnr;
+	stli_comstats.port = portp->portnr;
+	stli_comstats.state = portp->state;
+	/*stli_comstats.flags = portp->flags;*/
+	stli_comstats.ttystate = portp->tty.t_state;
+	stli_comstats.cflags = portp->tty.t_cflag;
+	stli_comstats.iflags = portp->tty.t_iflag;
+	stli_comstats.oflags = portp->tty.t_oflag;
+	stli_comstats.lflags = portp->tty.t_lflag;
+
+	stli_comstats.txtotal = stli_cdkstats.txchars;
+	stli_comstats.rxtotal = stli_cdkstats.rxchars + stli_cdkstats.ringover;
+	stli_comstats.txbuffered = stli_cdkstats.txringq;
+	stli_comstats.rxbuffered = stli_cdkstats.rxringq;
+	stli_comstats.rxoverrun = stli_cdkstats.overruns;
+	stli_comstats.rxparity = stli_cdkstats.parity;
+	stli_comstats.rxframing = stli_cdkstats.framing;
+	stli_comstats.rxlost = stli_cdkstats.ringover + portp->rxlost;
+	stli_comstats.rxbreaks = stli_cdkstats.rxbreaks;
+	stli_comstats.txbreaks = stli_cdkstats.txbreaks;
+	stli_comstats.txxon = stli_cdkstats.txstart;
+	stli_comstats.txxoff = stli_cdkstats.txstop;
+	stli_comstats.rxxon = stli_cdkstats.rxstart;
+	stli_comstats.rxxoff = stli_cdkstats.rxstop;
+	stli_comstats.rxrtsoff = stli_cdkstats.rtscnt / 2;
+	stli_comstats.rxrtson = stli_cdkstats.rtscnt - stli_comstats.rxrtsoff;
+	stli_comstats.modem = stli_cdkstats.dcdcnt;
+	stli_comstats.hwid = stli_cdkstats.hwid;
+	stli_comstats.signals = stli_mktiocm(stli_cdkstats.signals);
+
+	*((comstats_t *) data) = stli_comstats;;
+	return(0);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Clear the port stats structure. We also return it zeroed out...
+ */
+
+static int stli_clrportstats(stliport_t *portp, caddr_t data)
+{
+	stlibrd_t	*brdp;
+	int		rc;
+
+	if (portp == (stliport_t *) NULL) {
+		stli_comstats = *((comstats_t *) data);
+		portp = stli_getport(stli_comstats.brd, stli_comstats.panel,
+			stli_comstats.port);
+		if (portp == (stliport_t *) NULL)
+			return(-ENODEV);
+	}
+
+	brdp = stli_brds[portp->brdnr];
+	if (brdp == (stlibrd_t *) NULL)
+		return(-ENODEV);
+
+	if ((rc = stli_cmdwait(brdp, portp, A_CLEARSTATS, 0, 0, 0)) < 0)
+		return(rc);
+
+	portp->rxlost = 0;
+	bzero(&stli_comstats, sizeof(comstats_t));
+	stli_comstats.brd = portp->brdnr;
+	stli_comstats.panel = portp->panelnr;
+	stli_comstats.port = portp->portnr;
+
+	*((comstats_t *) data) = stli_comstats;;
+	return(0);
+}
+
+/*****************************************************************************/
+
+/*
+ *	Code to handle an "staliomem" read and write operations. This device
+ *	is the contents of the board shared memory. It is used for down
+ *	loading the slave image (and debugging :-)
+ */
+
+STATIC int stli_memrw(dev_t dev, struct uio *uiop, int flag)
+{
+	stlibrd_t	*brdp;
+	void		*memptr;
+	int		brdnr, size, n, error;
+
+#if DEBUG
+	printf("stli_memrw(dev=%x,uiop=%x,flag=%x)\n", (int) dev,
+		(int) uiop, flag);
+#endif
+
+	brdnr = dev & 0x7;
+	brdp = stli_brds[brdnr];
+	if (brdp == (stlibrd_t *) NULL)
+		return(ENODEV);
+	if (brdp->state == 0)
+		return(ENODEV);
+
+	if (uiop->uio_offset >= brdp->memsize)
+		return(0);
+
+	error = 0;
+	size = brdp->memsize - uiop->uio_offset;
+
+	disable_intr();
+	EBRDENABLE(brdp);
+	while (size > 0) {
+		memptr = (void *) EBRDGETMEMPTR(brdp, uiop->uio_offset);
+		n = MIN(size, (brdp->pagesize -
+			(((unsigned long) uiop->uio_offset) % brdp->pagesize)));
+		error = uiomove(memptr, n, uiop);
+		if ((uiop->uio_resid == 0) || error)
+			break;
+	}
+	EBRDDISABLE(brdp);
+	enable_intr();
+
+	return(error);
+}
+
+/*****************************************************************************/
+
+/*
+ *	The "staliomem" device is also required to do some special operations
+ *	on the board. We need to be able to send an interrupt to the board,
+ *	reset it, and start/stop it.
+ */
+
+static int stli_memioctl(dev_t dev, int cmd, caddr_t data, int flag, struct proc *p)
+{
+	stlibrd_t	*brdp;
+	int		brdnr, rc;
+
+#if DEBUG
+	printf("stli_memioctl(dev=%x,cmd=%x,data=%x,flag=%x)\n", (int) dev,
+		cmd, (int) data, flag);
+#endif
+
+	brdnr = dev & 0x7;
+	brdp = stli_brds[brdnr];
+	if (brdp == (stlibrd_t *) NULL)
+		return(ENODEV);
+	if (brdp->state == 0)
+		return(ENODEV);
+
+	rc = 0;
+
+	switch (cmd) {
+	case STL_BINTR:
+		EBRDINTR(brdp);
+		break;
+	case STL_BSTART:
+		rc = stli_startbrd(brdp);
+		break;
+	case STL_BSTOP:
+		brdp->state &= ~BST_STARTED;
+		break;
+	case STL_BRESET:
+		brdp->state &= ~BST_STARTED;
+		EBRDRESET(brdp);
+		if (stli_shared == 0) {
+			if (brdp->reenable != NULL)
+				(* brdp->reenable)(brdp);
+		}
+		break;
+	case COM_GETPORTSTATS:
+		rc = stli_getportstats((stliport_t *) NULL, data);
+		break;
+	case COM_CLRPORTSTATS:
+		rc = stli_clrportstats((stliport_t *) NULL, data);
+		break;
+	case COM_GETBRDSTATS:
+		rc = stli_getbrdstats(data);
+		break;
+	default:
+		rc = ENOTTY;
+		break;
+	}
+
+	return(rc);
+}
+
+/*****************************************************************************/