recording cvs-1.6 file death

9 files changed, 0 insertions, 835 deletions

diff --git a/sys/i386/conf/ATAPI b/sys/i386/conf/ATAPI
deleted file mode 100644
index bf04ac1..0000000
--- a/sys/i386/conf/ATAPI
+++ /dev/null
@@ -1,123 +0,0 @@
-#
-# ATAPI -- GENERIC kernel with ATAPI (IDE) CDROM support added.
-#
-#	$Id: ATAPI,v 1.1 1995/10/04 08:25:24 jkh Exp $
-#
-
-machine		"i386"
-cpu		"I386_CPU"
-cpu		"I486_CPU"
-cpu		"I586_CPU"
-ident		ATAPIKERN
-maxusers	10
-
-options		MATH_EMULATE		#Support for x87 emulation
-options		INET			#InterNETworking
-options		FFS			#Berkeley Fast Filesystem
-options		NFS			#Network Filesystem
-options		MSDOSFS			#MSDOS Filesystem
-options		"CD9660"		#ISO 9660 Filesystem
-options		PROCFS			#Process filesystem
-options		"COMPAT_43"		#Compatible with BSD 4.3
-options		"SCSI_DELAY=15"		#Be pessimistic about Joe SCSI device
-options		BOUNCE_BUFFERS		#include support for DMA bounce buffers
-options		UCONSOLE		#Allow users to grab the console
-
-options		SYSVSHM
-options		SYSVSEM
-options		SYSVMSG
-
-config		kernel	root on wd0 
-
-controller	isa0
-controller	pci0
-
-controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
-disk		fd0	at fdc0 drive 0
-disk		fd1	at fdc0 drive 1
-tape		ft0	at fdc0 drive 2
-
-controller	wdc0	at isa? port "IO_WD1" bio irq 14 vector wdintr
-disk		wd0	at wdc0 drive 0
-disk		wd1	at wdc0 drive 1
-
-controller	wdc1	at isa? port "IO_WD2" bio irq 15 vector wdintr
-disk		wd2	at wdc1 drive 0
-disk		wd3	at wdc1 drive 1
-
-options         ATAPI   #Enable ATAPI support for IDE bus
-device          wcd0    #IDE CD-ROM
-
-controller	ncr0
-controller	ahc0
-
-controller	bt0	at isa? port "IO_BT0" bio irq ? vector btintr
-controller	uha0	at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
-controller	ahc1	at isa? bio irq ? vector ahcintr
-controller	ahb0	at isa? bio irq ? vector ahbintr
-controller	aha0	at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
-controller	aic0    at isa? port 0x340 bio irq 11 vector aicintr
-controller	nca0	at isa? port 0x1f88 bio irq 10 vector ncaintr
-controller	nca1	at isa? port 0x350 bio irq 5 vector ncaintr
-controller	sea0	at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr
-
-controller	scbus0
-
-device		sd0
-
-device		st0
-
-device		cd0	#Only need one of these, the code dynamically grows
-
-device		wt0	at isa? port 0x300 bio irq 5 drq 1 vector wtintr
-device		mcd0	at isa? port 0x300 bio irq 10 vector mcdintr
-device		mcd1	at isa? port 0x340 bio irq 11 vector mcdintr
-
-controller	matcd0	at isa? port ? bio
-
-device		scd0	at isa? port 0x230 bio
-
-# syscons is the default console driver, resembling an SCO console
-device		sc0	at isa? port "IO_KBD" tty irq 1 vector scintr
-# Enable this and PCVT_FREEBSD for pcvt vt220 compatible console driver
-#device		vt0	at isa? port "IO_KBD" tty irq 1 vector pcrint
-#options		"PCVT_FREEBSD=210"	# pcvt running on FreeBSD 2.1
-#options		XSERVER			# include code for XFree86
-
-device		npx0	at isa? port "IO_NPX" irq 13 vector npxintr
-
-device		sio0	at isa? port "IO_COM1" tty irq 4 vector siointr
-device		sio1	at isa? port "IO_COM2" tty irq 3 vector siointr
-device		sio2	at isa? port "IO_COM3" tty irq 5 vector siointr
-device		sio3	at isa? port "IO_COM4" tty irq 9 vector siointr
-
-device		lpt0	at isa? port? tty irq 7 vector lptintr
-device		lpt1	at isa? port? tty
-device		lpt2	at isa? port? tty
-device		mse0	at isa? port 0x23c tty irq 5 vector mseintr
-
-# Order is important here due to intrusive probes, do *not* alphabetize
-# this list of network interfaces until the probes have been fixed.
-# Right now it appears that the ie0 must be probed before ep0. See
-# revision 1.20 of this file.
-device de0
-device ed0 at isa? port 0x280 net irq  5 iomem 0xd8000 vector edintr
-device ed1 at isa? port 0x300 net irq  5 iomem 0xd8000 vector edintr
-device ie0 at isa? port 0x360 net irq  7 iomem 0xd0000 vector ieintr
-device ep0 at isa? port 0x300 net irq 10 vector epintr
-device ix0 at isa? port 0x300 net irq 10 iomem 0xd0000 iosiz 32768 vector ixintr
-device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
-device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
-device lnc1 at isa? port 0x300 net irq 10 drq 0 vector lncintr
-device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
-device zp0 at isa? port 0x300 net irq 10 iomem 0xd8000 vector zpintr
-
-pseudo-device	loop
-pseudo-device	ether
-pseudo-device	log
-pseudo-device	sl	1
-# ijppp uses tun instead of ppp device
-#pseudo-device	ppp	1
-pseudo-device	tun	1
-pseudo-device	pty	16
-pseudo-device	gzip		# Exec gzipped a.out's
diff --git a/sys/i386/conf/BOOTFLP b/sys/i386/conf/BOOTFLP
deleted file mode 100644
index 1bb3bd4..0000000
--- a/sys/i386/conf/BOOTFLP
+++ /dev/null
@@ -1,70 +0,0 @@
-#
-# GENERIC -- Generic machine with WD/AHx/NCR/BTx family disks
-#
-#	$Id: BOOTFLP,v 1.2 1995/02/21 13:42:57 jkh Exp $
-#
-
-machine		"i386"
-cpu		"I386_CPU"
-cpu		"I486_CPU"
-cpu		"I586_CPU"
-ident		BOOTFLP
-maxusers	10
-
-options		MATH_EMULATE		#Support for x87 emulation
-options		FFS			#Berkeley Fast Filesystem
-options		"CD9660"		#ISO 9660 Filesystem
-options		"SCSI_DELAY=15"		#Be pessimistic about Joe SCSI device
-options		"SCSI_NCR_MAX_SYNC=0"	#Restrict NCR to asynch. transfers
-options		BOUNCE_BUFFERS		#include support for DMA bounce buffers
-options		UCONSOLE		#Allow users to grab the console
-
-config		kernel	root on wd0 swap on vn0 dumps on wd0
-
-controller	isa0
-controller	pci0
-
-controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
-disk		fd0	at fdc0 drive 0
-
-controller	wdc0	at isa? port "IO_WD1" bio irq 14 vector wdintr
-disk		wd0	at wdc0 drive 0
-disk		wd1	at wdc0 drive 1
-
-controller	wdc1	at isa? port "IO_WD2" bio irq 15 vector wdintr
-disk		wd2	at wdc1 drive 0
-disk		wd3	at wdc1 drive 1
-
-device		sio0	at isa? port "IO_COM1" tty irq 4 vector siointr
-
-controller	ncr0
-controller	ahc0
-
-controller	bt0	at isa? port "IO_BT0" bio irq ? vector btintr
-controller	uha0	at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
-controller	ahc1	at isa? bio irq ? vector ahcintr
-controller	ahb0	at isa? bio irq ? vector ahbintr
-controller	aha0	at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
-controller	aic0    at isa? port 0x340 bio irq 11 vector aicintr
-controller	nca0	at isa? port 0x1f88 bio irq 10 vector ncaintr
-controller	nca1	at isa? port 0x350 bio irq 5 vector ncaintr
-controller	sea0	at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr
-
-controller	scbus0
-
-device		sd0
-
-device		st0	#Only need one of these, the code dynamically grows
-
-device		cd0	#Only need one of these, the code dynamically grows
-
-device		wt0	at isa? port 0x300 bio irq 5 drq 1 vector wtintr
-device		mcd0	at isa? port 0x300 bio irq 10 vector mcdintr
-device		mcd1	at isa? port 0x340 bio irq 11 vector mcdintr
-
-device		sc0	at isa? port "IO_KBD" tty irq 1 vector scintr
-device		npx0	at isa? port "IO_NPX" irq 13 vector npxintr
-
-pseudo-device	log
-pseudo-device	gzip		# Exec gzipped a.out's
-pseudo-device	vn
diff --git a/sys/i386/conf/CORBIN b/sys/i386/conf/CORBIN
deleted file mode 100644
index 165e97c..0000000
--- a/sys/i386/conf/CORBIN
+++ /dev/null
@@ -1,116 +0,0 @@
-#
-# 'CORBIN' Kernel Configuration
-#
-machine		"i386"
-cpu		"I386_CPU"
-cpu		"I486_CPU"
-ident		CORBIN
-
-timezone	8 dst
-maxusers	16
-
-options		"i486"
-
-options		INET,GATEWAY
-#options		MULTICAST,MROUTING
-options		FFS
-options		MFS
-options		NFS
-options		LFS
-options		FIFO
-options		PROCFS
-options		UNION
-options		KERNFS
-options		FDESC
-options		PORTAL
-options		NULLFS
-options		UMAPFS
-options		"CD9660"
-
-options		KTRACE				#kernel syscall tracing
-options		"COMPAT_43"			#sycall compatibility
-#options		"TCP_COMPAT_42"
-#options		UCONSOLE			#allow non-root console switch
-#options		"COMCONSOLE=0"			#serial console
-options		COM_BIDIR			#"bidirectional" serial ports
-options		COM_MULTIPORT			#multiport serial cards
-options		MATH_EMULATE			#i387 math emulator
-#options		SYSVSHM				#SYSV shared memory
-#options		"SHMMAXPGS=1024"		#max sysvshm shared pages
-options		DUMMY_NOPS				#no nops in inb/outb
-options		FAT_CURSOR				#block cursor
-options		"NCONS=4"				#four virtual consoles
-options		"SYMTAB_SPACE=92000"			#space for debugging symbols
-options		"NFS_MAXATTRTIMO=10"			#maximum NFS attribute cache timeout
-
-options		USER_LDT
-
-config		kernel	root on sd0 swap on sd0 dumps on sd0
-
-#ISA bus
-controller	isa0
-
-#MFM disk
-controller	wdc0	at isa? port "IO_WD1" bio irq 14 vector wdintr
-disk		wd0	at wdc0 drive 0
-disk		wd1	at wdc0 drive 1
-
-#Floppy disk
-controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
-disk		fd0	at fdc0 drive 0
-disk		fd1	at fdc0 drive 1
-
-#IO_AHA0 = 0x330  IO_AHA1 = 0x334
-controller	ahb0	at isa? bio irq 11 vector ahbintr
-#controller	aha0	at isa? port 0x330 bio irq 11 drq 5 vector ahaintr
-#controller	aha1	at isa? port "IO_AHA1" bio irq 12 drq 7 vector ahaintr
-controller	scbus0
-device		sd0
-device		sd1
-device		sd2
-device		sd3
-#
-device		st0
-device		cd0
-#
-#device		mcd0	at isa? port 0x320 bio irq 5 vector mcdintr
-
-#PC console - "syscons"
-device		sc0	at isa? port "IO_KBD" tty irq 1 vector scintr
-
-#Numeric processor (FPU)
-device		npx0	at isa? port "IO_NPX" irq 13 vector npxintr
-
-#16450/16550 UARTs
-#device		com0	at isa? port "IO_COM1" tty irq 4 vector comintr
-#device		com1	at isa? port "IO_COM2" tty irq 3 vector comintr
-#device		com2	at isa? port 0x3e8 tty irq 9 vector comintr
-#device		com3	at isa? port 0x2e8 tty irq 2 vector comintr
-device		sio0	at isa? port "IO_COM1" tty irq 4 vector siointr
-device		sio1	at isa? port "IO_COM2" tty irq 3 vector siointr
-device		sio2	at isa? port 0x3e8 tty irq 9 vector siointr
-#device		sio3	at isa? port 0x2e8 tty irq 2 vector siointr
-
-#device ep0 at isa? port 0x300 net irq 10 vector epintr
-
-#Western Digital WD8003/WD8013 ethernet
-#device		ed0	at isa? port 0x300 net flags 0x04 irq 10 iomem 0xcc000 iosiz 16384 vector edintr
-device		ed0	at isa? port 0x300 net irq 10 iomem 0xcc000 vector edintr
-
-#device		is0	at isa? port 0x280 net irq 10 drq 7 vector isintr
-
-#device		wt0	at isa? port 0x300 bio irq 5 drq 1 vector wtintr
-
-#device		sb0	at isa? port 0x220 irq 5 drq 1 vector sbintr
-
-#device snd3 at isa? port 0x388 irq 12 drq 3 vector pasintr
-#device snd2 at isa? port 0x220 irq 7 drq 1 vector sbintr
-
-pseudo-device	loop
-pseudo-device	ether
-pseudo-device	sl	2
-pseudo-device	log
-pseudo-device	pty	16
-pseudo-device	bpfilter	4
-pseudo-device	ddb
-#pseudo-device	speaker
diff --git a/sys/i386/conf/GENERICAH b/sys/i386/conf/GENERICAH
deleted file mode 100644
index 3022340..0000000
--- a/sys/i386/conf/GENERICAH
+++ /dev/null
@@ -1,92 +0,0 @@
-#
-# GENERICAH -- Generic machine with WD/AHx/NCR family disks
-#
-#	$Id: GENERICAH,v 1.53 1994/10/20 00:53:26 phk Exp $
-#
-
-machine		"i386"
-cpu		"I386_CPU"
-cpu		"I486_CPU"
-cpu		"I586_CPU"
-ident		GENERICAH
-maxusers	10
-
-options		MATH_EMULATE		#Support for x87 emulation
-options		INET			#InterNETworking
-options		FFS			#Berkeley Fast File System
-options		PROCFS			#Process filesystem
-options		NFS			#Network File System
-options		"CD9660"		#CD ISO9660 File System
-options		"COMPAT_43"		#Compatible with BSD 4.3
-options		UCONSOLE		#X Console support
-options		"FAT_CURSOR"		#block cursor in syscons or pccons
-options		"SCSI_DELAY=15"		#Be pessimistic about Joe SCSI device
-options		"NCONS=4"		#4 virtual consoles
-options		BOUNCE_BUFFERS		#include support for DMA bounce buffers
-
-config		kernel	root on wd0 swap on wd0 and wd1 and sd0 and sd1 dumps on wd0
-
-controller	isa0
-
-controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
-disk		fd0	at fdc0 drive 0
-disk		fd1	at fdc0 drive 1
-#tape		ft0	at fdc0 drive 2
-
-controller	wdc0	at isa? port "IO_WD1" bio irq 14 vector wdintr
-disk		wd0	at wdc0 drive 0
-disk		wd1	at wdc0 drive 1
-
-controller	wdc1	at isa? port "IO_WD2" bio irq 15 vector wdintr
-disk		wd2	at wdc1 drive 0
-disk		wd3	at wdc1 drive 1
-
-controller	ahb0	at isa? bio irq ? vector ahbintr
-controller	aha0	at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
-controller	pas0	at isa? port 0x1f88 bio
-controller	aic0    at isa? port 0x340 bio irq 11 vector aicintr
-controller	pci0
-controller	ncr0
-
-controller	scbus0
-
-device		sd0
-device		sd1
-device		sd2
-device		sd3
-
-device		st0
-device		st1
-
-device		cd0	#Only need one of these, the code dynamically grows
-
-device		wt0	at isa? port 0x300 bio irq 5 drq 1 vector wtintr
-device		mcd0	at isa? port 0x300 bio irq 10 vector mcdintr
-device		mcd1	at isa? port 0x340 bio irq 11 vector mcdintr
-
-device		sc0	at isa? port "IO_KBD" tty irq 1 vector scintr
-device		npx0	at isa? port "IO_NPX" irq 13 vector npxintr
-
-device		sio0	at isa? port "IO_COM1" tty irq 4 vector siointr
-device		sio1	at isa? port "IO_COM2" tty irq 3 vector siointr
-device		sio2	at isa? port "IO_COM3" tty irq 5 vector siointr
-device		sio3	at isa? port "IO_COM4" tty irq 9 vector siointr
-
-device		lpt0	at isa? port? tty irq 7 vector lptintr
-device		lpt1	at isa? port? tty
-device		lpt2	at isa? port? tty
-
-device ed0 at isa? port 0x280 net irq  5 iomem 0xd8000 vector edintr
-device ed1 at isa? port 0x300 net irq  5 iomem 0xd8000 vector edintr
-device ed2 at isa? port 0x300 net irq 10 iomem 0xcc000 vector edintr
-device ep0 at isa? port 0x300 net irq 10 vector epintr
-device ie0 at isa? port 0x360 net irq  7 iomem 0xd0000 vector ieintr
-device is0 at isa? port 0x280 net irq 10 drq 7 vector isintr
-
-pseudo-device	loop
-pseudo-device	ether
-pseudo-device	log
-pseudo-device	sl	2
-pseudo-device	pty	16
-pseudo-device	speaker
-pseudo-device	gzip		# Exec gzipped a.out's
diff --git a/sys/i386/conf/GENERICBT b/sys/i386/conf/GENERICBT
deleted file mode 100644
index 9c1009e..0000000
--- a/sys/i386/conf/GENERICBT
+++ /dev/null
@@ -1,87 +0,0 @@
-#
-# GENERICBT -- Generic machine with WD/BTx family disks
-#
-#	$Id: GENERICBT,v 1.49 1994/10/20 00:53:28 phk Exp $
-#
-
-machine		"i386"
-cpu		"I386_CPU"
-cpu		"I486_CPU"
-cpu		"I586_CPU"
-ident		GENERICBT
-maxusers	10
-
-options		MATH_EMULATE		#Support for x87 emulation
-options		INET			#InterNETworking
-options		FFS			#Berkeley Fast File System
-options		PROCFS			#Process filesystem
-options		NFS			#Network File System
-options		"CD9660"		#CD ISO9660 File System
-options		"COMPAT_43"		#Compatible with BSD 4.3
-options		UCONSOLE		#X Console support
-options		"FAT_CURSOR"		#block cursor in syscons or pccons
-options		"SCSI_DELAY=15"		#Be pessimistic about Joe SCSI device
-options		"NCONS=4"		#4 virtual consoles
-options		BOUNCE_BUFFERS		#include support for DMA bounce buffers
-
-config		kernel	root on wd0 swap on wd0 and wd1 and sd0 and sd1 dumps on wd0
-
-controller	isa0
-
-controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
-disk		fd0	at fdc0 drive 0
-disk		fd1	at fdc0 drive 1
-#tape		ft0	at fdc0 drive 2
-
-controller	wdc0	at isa? port "IO_WD1" bio irq 14 vector wdintr
-disk		wd0	at wdc0 drive 0
-disk		wd1	at wdc0 drive 1
-
-controller	wdc1	at isa? port "IO_WD2" bio irq 15 vector wdintr
-disk		wd2	at wdc1 drive 0
-disk		wd3	at wdc1 drive 1
-
-controller	bt0	at isa? port "IO_BT0" bio irq ? vector btintr
-controller	uha0	at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
-controller	scbus0
-
-device		sd0
-device		sd1
-device		sd2
-device		sd3
-
-device		st0
-device		st1
-
-device		cd0	#Only need one of these, the code dynamically grows
-
-device		wt0	at isa? port 0x300 bio irq 5 drq 1 vector wtintr
-device		mcd0	at isa? port 0x300 bio irq 10 vector mcdintr
-device		mcd1	at isa? port 0x340 bio irq 11 vector mcdintr
-
-device		sc0	at isa? port "IO_KBD" tty irq 1 vector scintr
-device		npx0	at isa? port "IO_NPX" irq 13 vector npxintr
-
-device		sio0	at isa? port "IO_COM1" tty irq 4 vector siointr
-device		sio1	at isa? port "IO_COM2" tty irq 3 vector siointr
-device		sio2	at isa? port "IO_COM3" tty irq 5 vector siointr
-device		sio3	at isa? port "IO_COM4" tty irq 9 vector siointr
-
-device          lpt0    at isa? port? tty irq 7 vector lptintr
-device          lpt1    at isa? port? tty
-device          lpt2    at isa? port? tty
-
-device ed0 at isa? port 0x280 net irq  5 iomem 0xd8000 vector edintr
-device ed1 at isa? port 0x300 net irq  5 iomem 0xd8000 vector edintr
-device ed2 at isa? port 0x300 net irq 10 iomem 0xcc000 vector edintr
-device ep0 at isa? port 0x300 net irq 10 vector epintr
-device ie0 at isa? port 0x360 net irq  7 iomem 0xd0000 vector ieintr
-device is0 at isa? port 0x280 net irq 10 drq 7 vector isintr
-
-pseudo-device	loop
-pseudo-device	ether
-pseudo-device	log
-pseudo-device	sl	2
-pseudo-device	pty	16
-pseudo-device	speaker
-pseudo-device	gzip		# Exec gzipped a.out's
diff --git a/sys/i386/conf/IPFIREWALL b/sys/i386/conf/IPFIREWALL
deleted file mode 100644
index 9371286..0000000
--- a/sys/i386/conf/IPFIREWALL
+++ /dev/null
@@ -1,101 +0,0 @@
-#
-# IPFIREWALL -- Sample Generic kernel suitable for building an IP firewall.
-#
-#	$Id: IPFIREWALL,v 1.1 1994/10/28 15:09:36 jkh Exp $
-#
-
-machine		"i386"
-cpu		"I386_CPU"
-cpu		"I486_CPU"
-cpu		"I586_CPU"
-ident		GENERIC
-maxusers	10
-
-options		INET			#InterNETworking
-options		FFS			#Berkeley Fast File System
-options		NFS			#Network File system
-options		PROCFS			#Process filesystem
-options		"COMPAT_43"		#Compatible with BSD 4.3
-options		UCONSOLE		#X Console support
-options		"FAT_CURSOR"		#block cursor in syscons or pccons
-options		"SCSI_DELAY=15"		#Be pessimistic about Joe SCSI device
-options		"NCONS=4"		#4 virtual consoles
-options		BOUNCE_BUFFERS		#include support for DMA bounce buffers
-options		USERCONFIG		#Allow user configuration with -c
-options		GATEWAY			#Pass packets
-options		IPFIREWALL		#firewall code
-options		IPFIREWALL_VERBOSE	#print information about dropped packets
-options		IPBROADCASTECHO=1       #send reply to broadcast pings
-options		IPMASKAGENT=1           #send reply to icmp mask requests
-
-config		kernel	root on wd0 swap on wd0 and wd1 and sd0 and sd1 dumps on wd0
-
-controller	isa0
-controller	pci0
-
-controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
-disk		fd0	at fdc0 drive 0
-disk		fd1	at fdc0 drive 1
-#tape		ft0	at fdc0 drive 2
-
-controller	wdc0	at isa? port "IO_WD1" bio irq 14 vector wdintr
-disk		wd0	at wdc0 drive 0
-disk		wd1	at wdc0 drive 1
-
-controller	wdc1	at isa? port "IO_WD2" bio irq 15 vector wdintr
-disk		wd2	at wdc1 drive 0
-disk		wd3	at wdc1 drive 1
-
-controller	ncr0
-
-controller	bt0	at isa? port "IO_BT0" bio irq ? vector btintr
-controller	ahb0	at isa? bio irq ? vector ahbintr
-controller	aha0	at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
-controller	uha0	at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
-controller	aic0    at isa? port 0x340 bio irq 11 vector aicintr
-controller	pas0	at isa? port 0x1f88 bio
-controller	sea0	at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr
-controller	scbus0
-
-device		sd0
-device		sd1
-device		sd2
-device		sd3
-
-device		st0
-device		st1
-
-device		cd0	#Only need one of these, the code dynamically grows
-
-device		wt0	at isa? port 0x300 bio irq 5 drq 1 vector wtintr
-device		mcd0	at isa? port 0x300 bio irq 10 vector mcdintr
-device		mcd1	at isa? port 0x340 bio irq 11 vector mcdintr
-
-device		sc0	at isa? port "IO_KBD" tty irq 1 vector scintr
-device		npx0	at isa? port "IO_NPX" irq 13 vector npxintr
-
-device		sio0	at isa? port "IO_COM1" tty irq 4 vector siointr
-device		sio1	at isa? port "IO_COM2" tty irq 3 vector siointr
-device		sio2	at isa? port "IO_COM3" tty irq 5 vector siointr
-device		sio3	at isa? port "IO_COM4" tty irq 9 vector siointr
-
-device		lpt0	at isa? port? tty irq 7 vector lptintr
-device		lpt1	at isa? port? tty
-device		lpt2	at isa? port? tty
-
-device ed0 at isa? port 0x280 net irq  5 iomem 0xd8000 vector edintr
-device ed1 at isa? port 0x300 net irq  5 iomem 0xd8000 vector edintr
-device ed2 at isa? port 0x300 net irq 10 iomem 0xcc000 vector edintr
-device ep0 at isa? port 0x300 net irq 10 vector epintr
-device ie0 at isa? port 0x360 net irq  7 iomem 0xd0000 vector ieintr
-device is0 at isa? port 0x280 net irq 10 drq 7 vector isintr
-
-pseudo-device	loop
-pseudo-device	ether
-pseudo-device	log
-pseudo-device	ppp	2
-pseudo-device	sl	2
-pseudo-device	pty	16
-pseudo-device	speaker
-pseudo-device	gzip		# Exec gzipped a.out's
-pseudo-device   bpfilter  1
diff --git a/sys/i386/conf/MINI b/sys/i386/conf/MINI
deleted file mode 100644
index e038ee5..0000000
--- a/sys/i386/conf/MINI
+++ /dev/null
@@ -1,56 +0,0 @@
-#
-# MINI -- A kernel to get FreeBSD on onto a disk.
-#
-#	$Id: MINI,v 1.4 1994/10/20 00:19:37 phk Exp $
-#
-
-machine		"i386"
-cpu		"I386_CPU"
-cpu		"I486_CPU"
-cpu		"I586_CPU"
-ident		MINI
-maxusers	1
-
-options		MATH_EMULATE		#Support for x87 emulation
-options		FFS			#Berkeley Fast File System
-options		"FAT_CURSOR"		#block cursor in syscons or pccons
-options		"SCSI_DELAY=15"		#Be pessimistic about Joe SCSI device
-options		"NCONS=1"		#1 virtual consoles
-options		BOUNCE_BUFFERS		#include support for DMA bounce buffers
-
-config		kernel	root on wd0 swap on wd0 and wd1 and sd0 and sd1 dumps on wd0
-
-controller	isa0
-controller	pci0
-
-controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
-disk		fd0	at fdc0 drive 0
-disk		fd1	at fdc0 drive 1
-
-controller	wdc0	at isa? port "IO_WD1" bio irq 14 vector wdintr
-disk		wd0	at wdc0 drive 0
-disk		wd1	at wdc0 drive 1
-
-controller	wdc1	at isa? port "IO_WD2" bio irq 15 vector wdintr
-disk		wd2	at wdc1 drive 0
-disk		wd3	at wdc1 drive 1
-
-controller	ncr0
-
-controller	bt0	at isa? port "IO_BT0" bio irq ? vector btintr
-controller	ahb0	at isa? bio irq ? vector ahbintr
-controller	aha0	at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
-controller	uha0	at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
-controller	aic0    at isa? port 0x340 bio irq 11 vector aicintr
-
-controller	scbus0
-
-device		sd0
-device		sd1
-device		sd2
-device		sd3
-
-device		sc0	at isa? port "IO_KBD" tty irq 1 vector scintr
-device		npx0	at isa? port "IO_NPX" irq 13 vector npxintr
-
-#pseudo-device	gzip		# Exec gzipped a.out's
diff --git a/sys/i386/conf/PCVT b/sys/i386/conf/PCVT
deleted file mode 100644
index 00e927f..0000000
--- a/sys/i386/conf/PCVT
+++ /dev/null
@@ -1,103 +0,0 @@
-#
-# PCVT - based on 	$Id: GENERIC,v 1.30 1995/01/28 05:01:43 jkh Exp $
-#
-
-machine		"i386"
-cpu		"I386_CPU"
-cpu		"I486_CPU"
-cpu		"I586_CPU"
-ident		GENERIC
-maxusers	10
-
-options		MATH_EMULATE		#Support for x87 emulation
-options		INET			#InterNETworking
-options		FFS			#Berkeley Fast Filesystem
-options		NFS			#Network Filesystem
-options		MSDOSFS			#MSDOS Filesystem
-options		"CD9660"		#ISO 9660 Filesystem
-options		PROCFS			#Process filesystem
-options		"COMPAT_43"		#Compatible with BSD 4.3
-options		"SCSI_DELAY=15"		#Be pessimistic about Joe SCSI device
-options		BOUNCE_BUFFERS		#include support for DMA bounce buffers
-options		UCONSOLE		#Allow users to grab the console
-
-# pcvt needs XCONSOLE for Xfree
-options 	XCONSOLE
-options		"PCVT_FREEBSD=210"	# pcvt running on FreeBSD 2.1
-
-config		kernel	root on wd0 swap on wd0 and wd1 and sd0 and sd1 and vn0 dumps on wd0
-
-controller	isa0
-controller	pci0
-
-controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
-disk		fd0	at fdc0 drive 0
-disk		fd1	at fdc0 drive 1
-tape		ft0	at fdc0 drive 2
-
-controller	wdc0	at isa? port "IO_WD1" bio irq 14 vector wdintr
-disk		wd0	at wdc0 drive 0
-disk		wd1	at wdc0 drive 1
-
-controller	wdc1	at isa? port "IO_WD2" bio irq 15 vector wdintr
-disk		wd2	at wdc1 drive 0
-disk		wd3	at wdc1 drive 1
-
-controller	ncr0
-controller	ahc0
-
-controller	bt0	at isa? port "IO_BT0" bio irq ? vector btintr
-controller	uha0	at isa? port "IO_UHA0" bio irq ? drq 5 vector uhaintr
-controller	ahc1	at isa? bio irq ? vector ahcintr
-controller	ahb0	at isa? bio irq ? vector ahbintr
-controller	aha0	at isa? port "IO_AHA0" bio irq ? drq 5 vector ahaintr
-controller	aic0    at isa? port 0x340 bio irq 11 vector aicintr
-controller	nca0	at isa? port 0x1f88 bio irq 10 vector ncaintr
-controller	nca1	at isa? port 0x350 bio irq 5 vector ncaintr
-controller	sea0	at isa? bio irq 5 iomem 0xc8000 iosiz 0x2000 vector seaintr
-
-controller	scbus0
-
-device		sd0
-
-device		st0
-
-device		cd0	#Only need one of these, the code dynamically grows
-
-device		wt0	at isa? port 0x300 bio irq 5 drq 1 vector wtintr
-device		mcd0	at isa? port 0x300 bio irq 10 vector mcdintr
-device		mcd1	at isa? port 0x340 bio irq 11 vector mcdintr
-
-device		scd0	at isa? port 0x230 bio
-
-# device	sc0	at isa? port "IO_KBD" tty irq 1 vector scintr
-device		vt0	at isa? port "IO_KBD" tty irq 1 vector pcrint
-
-device		npx0	at isa? port "IO_NPX" irq 13 vector npxintr
-
-device		sio0	at isa? port "IO_COM1" tty irq 4 vector siointr
-device		sio1	at isa? port "IO_COM2" tty irq 3 vector siointr
-device		sio2	at isa? port "IO_COM3" tty irq 5 vector siointr
-device		sio3	at isa? port "IO_COM4" tty irq 9 vector siointr
-
-device		lpt0	at isa? port? tty irq 7 vector lptintr
-device		lpt1	at isa? port? tty
-device		lpt2	at isa? port? tty
-
-device de0
-device ed0 at isa? port 0x280 net irq  5 iomem 0xd8000 vector edintr
-device ed1 at isa? port 0x300 net irq  5 iomem 0xd8000 vector edintr
-device ie0 at isa? port 0x360 net irq  7 iomem 0xd0000 vector ieintr
-device ep0 at isa? port 0x300 net irq 10 vector epintr
-device lnc0 at isa? port 0x280 net irq 10 drq 0 vector lncintr
-device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr
-device ze0 at isa? port 0x300 net irq 5 iomem 0xd8000 vector zeintr
-
-pseudo-device	loop
-pseudo-device	ether
-pseudo-device	log
-pseudo-device	sl	2
-pseudo-device	pty	16
-pseudo-device	speaker
-pseudo-device	gzip		# Exec gzipped a.out's
-pseudo-device	vn
diff --git a/sys/i386/conf/SYSCONS b/sys/i386/conf/SYSCONS
deleted file mode 100644
index 5c1fb04..0000000
--- a/sys/i386/conf/SYSCONS
+++ /dev/null
@@ -1,87 +0,0 @@
-#
-# SYSCONS -- Generic machine with WD/AHx family disks and syscons
-#
-#	$Id: SYSCONS,v 1.20 1994/03/01 01:27:03 alm Exp $
-#
-
-machine		"i386"
-cpu		"I386_CPU"
-cpu		"I486_CPU"
-ident		SYSCONS
-timezone	8 dst
-maxusers	10
-maxfdescs	2048			#Max file descriptors per process
-options		MATH_EMULATE		#Support for x87 emulation
-options		INET			#InterNETworking
-options		ISOFS			#ISO File System
-options		NFS			#Network File System
-options		PCFS			#MSDOS File System
-options		"COMPAT_43"		#Compatible with BSD 4.3
-options		"TCP_COMPAT_42"		#TCP/IP compatible with 4.2
-options		XSERVER			#Xserver
-options		UCONSOLE		#X Console support
-options		"NCONS=8"		#8 virtual consoles
-options		"FAT_CURSOR"		#block cursor in syscons
-options		"STAR_SAVER"		#syscons "stars" screen saver
-#options	GATEWAY			#Host is a Gateway (forwards packets)
-
-config		"386bsd"	root on wd0 swap on wd0 and sd0 dumps on wd0
-
-controller	isa0
-
-controller	fdc0	at isa? port "IO_FD1" bio irq 6 drq 2 vector fdintr
-disk		fd0	at fdc0 drive 0
-disk		fd1	at fdc0 drive 1
-#tape		ft0	at fdc0 drive 2
-
-controller	wdc0	at isa? port "IO_WD1" bio irq 14 vector wdintr
-disk		wd0	at wdc0 drive 0
-disk		wd1	at wdc0 drive 1
-
-controller	wdc1	at isa? port "IO_WD2" bio irq 15 vector wdintr
-disk		wd2	at wdc1 drive 0
-disk		wd3	at wdc1 drive 1
-
-controller	ahb0	at isa? bio irq 11 vector ahbintr
-controller	aha0	at isa? port "IO_AHA0" bio irq 11 drq 5 vector ahaintr
-controller	scbus0
-
-device		sd0
-device		sd1
-device		sd2
-device		sd3
-
-device		st0
-device		st1
-
-device		cd0	#Only need one of these, the code dynamically grows
-
-device		sc0	at isa? port "IO_KBD" tty irq 1 vector scintr
-device		npx0	at isa? port "IO_NPX" irq 13 vector npxintr
-
-device		sio0	at isa? port "IO_COM1" tty irq 4 vector siointr
-device		sio1	at isa? port "IO_COM2" tty irq 3 vector siointr
-device		sio2	at isa? port "IO_COM3" tty irq 5 vector siointr
-device		sio3	at isa? port "IO_COM4" tty irq 9 vector siointr
-
-device		lpt0	at isa? port "IO_LPT3" tty irq 7 vector lptintr
-device		lpa0	at isa? port "IO_LPT1" tty
-device		lpa1	at isa? port "IO_LPT2" tty
-
-device ed0 at isa? port 0x280 net irq 5 iomem 0xd8000 vector edintr
-device ed1 at isa? port 0x300 net irq 5 iomem 0xd8000 vector edintr
-device ie0 at isa? port 0x360 net irq 7 iomem 0xd0000 vector ieintr
-device is0 at isa? port 0x280 net irq 10 drq 7 vector isintr
-
-device		wt0	at isa? port 0x300 bio irq 5 drq 1 vector wtintr
-
-pseudo-device	loop
-pseudo-device	ether
-pseudo-device	log
-pseudo-device	sl	2
-pseudo-device	pty	16
-pseudo-device	speaker
-
-pseudo-device	swappager
-pseudo-device	vnodepager
-pseudo-device	devpager