Include rdp(4).

Should i also include it into GENERIC?

3 files changed, 8 insertions, 3 deletions

diff --git a/sys/i386/conf/LINT b/sys/i386/conf/LINT
index 749c2f3..2a3fa5e 100644
--- a/sys/i386/conf/LINT
+++ b/sys/i386/conf/LINT
@@ -2,7 +2,7 @@
 # LINT -- config file for checking all the sources, tries to pull in
 #	as much of the source tree as it can.
 #
-#	$Id: LINT,v 1.508 1998/12/12 08:15:59 imp Exp $
+#	$Id: LINT,v 1.509 1998/12/13 23:06:16 n_hibma Exp $
 #
 # NB: You probably don't want to try running a kernel built from this
 # file.  Instead, you should start from GENERIC, and add options from
@@ -1110,6 +1110,7 @@ options		"EXTRA_SIO=2"		#number of extra sio ports to allocate
 # le: Digital Equipment EtherWorks 2 and EtherWorks 3 (DEPCA, DE100,
 #     DE101, DE200, DE201, DE202, DE203, DE204, DE205, DE422)
 # lnc: Lance/PCnet cards (Isolan, Novell NE2100, NE32-VL, AMD Am7990 & Am79C960)
+# rdp: RealTek RTL 8002-based pocket ethernet adapters
 # sr: RISCom/N2 hdlc sync 1/2 port V.35/X.21 serial driver (requires sppp)
 # wl: Lucent Wavelan (ISA card only).
 # ze: IBM/National Semiconductor PCMCIA ethernet controller.
@@ -1131,6 +1132,7 @@ device ie0 at isa? port 0x300 net irq 5 iomem 0xd0000
 device ie1 at isa? port 0x360 net irq 7 iomem 0xd0000
 device le0 at isa? port 0x300 net irq 5 iomem 0xd0000
 device lnc0 at isa? port 0x280 net irq 10 drq 0
+device rdp0 at isa? port 0x378 net irq 7 flags 2
 device sr0 at isa? port 0x300 net irq 5 iomem 0xd0000
 options		WLCACHE		# enables the signal-strength cache
 options		WLDEBUG		# enables verbose debugging output
diff --git a/sys/i386/conf/NOTES b/sys/i386/conf/NOTES
index 749c2f3..2a3fa5e 100644
--- a/sys/i386/conf/NOTES
+++ b/sys/i386/conf/NOTES
@@ -2,7 +2,7 @@
 # LINT -- config file for checking all the sources, tries to pull in
 #	as much of the source tree as it can.
 #
-#	$Id: LINT,v 1.508 1998/12/12 08:15:59 imp Exp $
+#	$Id: LINT,v 1.509 1998/12/13 23:06:16 n_hibma Exp $
 #
 # NB: You probably don't want to try running a kernel built from this
 # file.  Instead, you should start from GENERIC, and add options from
@@ -1110,6 +1110,7 @@ options		"EXTRA_SIO=2"		#number of extra sio ports to allocate
 # le: Digital Equipment EtherWorks 2 and EtherWorks 3 (DEPCA, DE100,
 #     DE101, DE200, DE201, DE202, DE203, DE204, DE205, DE422)
 # lnc: Lance/PCnet cards (Isolan, Novell NE2100, NE32-VL, AMD Am7990 & Am79C960)
+# rdp: RealTek RTL 8002-based pocket ethernet adapters
 # sr: RISCom/N2 hdlc sync 1/2 port V.35/X.21 serial driver (requires sppp)
 # wl: Lucent Wavelan (ISA card only).
 # ze: IBM/National Semiconductor PCMCIA ethernet controller.
@@ -1131,6 +1132,7 @@ device ie0 at isa? port 0x300 net irq 5 iomem 0xd0000
 device ie1 at isa? port 0x360 net irq 7 iomem 0xd0000
 device le0 at isa? port 0x300 net irq 5 iomem 0xd0000
 device lnc0 at isa? port 0x280 net irq 10 drq 0
+device rdp0 at isa? port 0x378 net irq 7 flags 2
 device sr0 at isa? port 0x300 net irq 5 iomem 0xd0000
 options		WLCACHE		# enables the signal-strength cache
 options		WLDEBUG		# enables verbose debugging output
diff --git a/sys/i386/conf/files.i386 b/sys/i386/conf/files.i386
index a343f19..027713d 100644
--- a/sys/i386/conf/files.i386
+++ b/sys/i386/conf/files.i386
@@ -1,7 +1,7 @@
 # This file tells config what files go into building a kernel,
 # files marked standard are always included.
 #
-#	$Id: files.i386,v 1.205 1998/09/20 06:04:55 bde Exp $
+#	$Id: files.i386,v 1.206 1998/10/09 23:08:14 peter Exp $
 #
 # The long compile-with and dependency lines are required because of
 # limitations in config: backslash-newline doesn't work in strings, and
@@ -125,6 +125,7 @@ i386/isa/if_fe.c		optional	fe	device-driver
 i386/isa/if_ie.c		optional	ie	device-driver
 i386/isa/if_le.c		optional	le	device-driver
 i386/isa/if_lnc.c		optional	lnc	device-driver
+i386/isa/if_rdp.c		optional	rdp	device-driver
 i386/isa/if_sr.c		optional	sr	device-driver
 i386/isa/if_wl.c		optional	wl	device-driver
 i386/isa/if_ze.c		optional	ze	device-driver