diff options
author | sam <sam@FreeBSD.org> | 2004-12-08 17:32:02 +0000 |
---|---|---|
committer | sam <sam@FreeBSD.org> | 2004-12-08 17:32:02 +0000 |
commit | adfba3a7ae8962e0098d6be0158eec125eda7284 (patch) | |
tree | 1edef1cb605473324e29e8e4e0981882c2177c9a /sys/dev | |
parent | 2843bf259ec9ca475410e4e9e53e7cd47cd55333 (diff) | |
download | FreeBSD-src-adfba3a7ae8962e0098d6be0158eec125eda7284.zip FreeBSD-src-adfba3a7ae8962e0098d6be0158eec125eda7284.tar.gz |
Transmit rate control modules for the ath driver.
Diffstat (limited to 'sys/dev')
-rw-r--r-- | sys/dev/ath/ath_rate/amrr/amrr.c | 546 | ||||
-rw-r--r-- | sys/dev/ath/ath_rate/amrr/amrr.h | 77 | ||||
-rw-r--r-- | sys/dev/ath/ath_rate/onoe/onoe.c | 527 | ||||
-rw-r--r-- | sys/dev/ath/ath_rate/onoe/onoe.h | 69 |
4 files changed, 1219 insertions, 0 deletions
diff --git a/sys/dev/ath/ath_rate/amrr/amrr.c b/sys/dev/ath/ath_rate/amrr/amrr.c new file mode 100644 index 0000000..6b075f9 --- /dev/null +++ b/sys/dev/ath/ath_rate/amrr/amrr.c @@ -0,0 +1,546 @@ +/*- + * Copyright (c) 2004 INRIA + * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any + * redistribution must be conditioned upon including a substantially + * similar Disclaimer requirement for further binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY + * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, + * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER + * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGES. + * + */ + +#include <sys/cdefs.h> +__FBSDID("$FreeBSD$"); + +/* + * AMRR rate control. See: + * http://www-sop.inria.fr/rapports/sophia/RR-5208.html + * "IEEE 802.11 Rate Adaptation: A Practical Approach" by + * Mathieu Lacage, Hossein Manshaei, Thierry Turletti + */ +#include "opt_inet.h" + +#include <sys/param.h> +#include <sys/systm.h> +#include <sys/sysctl.h> +#include <sys/module.h> +#include <sys/kernel.h> +#include <sys/lock.h> +#include <sys/mutex.h> +#include <sys/errno.h> + +#include <machine/bus.h> +#include <machine/resource.h> +#include <sys/bus.h> + +#include <sys/socket.h> + +#include <net/if.h> +#include <net/if_media.h> +#include <net/if_arp.h> +#include <net/ethernet.h> /* XXX for ether_sprintf */ + +#include <net80211/ieee80211_var.h> + +#include <net/bpf.h> + +#ifdef INET +#include <netinet/in.h> +#include <netinet/if_ether.h> +#endif + +#include <dev/ath/if_athvar.h> +#include <dev/ath/ath_rate/amrr/amrr.h> +#include <contrib/dev/ath/ah_desc.h> + +#define AMRR_DEBUG +#ifdef AMRR_DEBUG +#define DPRINTF(sc, _fmt, ...) do { \ + if (sc->sc_debug & 0x10) \ + printf(_fmt, __VA_ARGS__); \ +} while (0) +#else +#define DPRINTF(sc, _fmt, ...) +#endif + +static int ath_rateinterval = 1000; /* rate ctl interval (ms) */ +static int ath_rate_max_success_threshold = 10; +static int ath_rate_min_success_threshold = 1; + +static void ath_ratectl(void *); +static void ath_rate_update(struct ath_softc *, struct ieee80211_node *, + int rate); +static void ath_rate_ctl_start(struct ath_softc *, struct ieee80211_node *); +static void ath_rate_ctl(void *, struct ieee80211_node *); + +void +ath_rate_node_init(struct ath_softc *sc, struct ath_node *an) +{ + /* NB: assumed to be zero'd by caller */ + ath_rate_update(sc, &an->an_node, 0); +} + +void +ath_rate_node_cleanup(struct ath_softc *sc, struct ath_node *an) +{ +} + +void +ath_rate_findrate(struct ath_softc *sc, struct ath_node *an, + HAL_BOOL shortPreamble, size_t frameLen, + u_int8_t *rix, int *try0, u_int8_t *txrate) +{ + struct amrr_node *amn = ATH_NODE_AMRR(an); + + *rix = amn->amn_tx_rix0; + *try0 = amn->amn_tx_try0; + if (shortPreamble) + *txrate = amn->amn_tx_rate0sp; + else + *txrate = amn->amn_tx_rate0; +} + +void +ath_rate_setupxtxdesc(struct ath_softc *sc, struct ath_node *an, + struct ath_desc *ds, HAL_BOOL shortPreamble, u_int8_t rix) +{ + struct amrr_node *amn = ATH_NODE_AMRR(an); + + ath_hal_setupxtxdesc(sc->sc_ah, ds + , amn->amn_tx_rate1sp, amn->amn_tx_try1 /* series 1 */ + , amn->amn_tx_rate2sp, amn->amn_tx_try2 /* series 2 */ + , amn->amn_tx_rate3sp, amn->amn_tx_try3 /* series 3 */ + ); +} + +void +ath_rate_tx_complete(struct ath_softc *sc, + struct ath_node *an, const struct ath_desc *ds) +{ + struct amrr_node *amn = ATH_NODE_AMRR(an); + int sr = ds->ds_txstat.ts_shortretry; + int lr = ds->ds_txstat.ts_longretry; + int retry_count = sr + lr; + + amn->amn_tx_try0_cnt++; + if (retry_count == 1) { + amn->amn_tx_try1_cnt++; + } else if (retry_count == 2) { + amn->amn_tx_try1_cnt++; + amn->amn_tx_try2_cnt++; + } else if (retry_count == 3) { + amn->amn_tx_try1_cnt++; + amn->amn_tx_try2_cnt++; + amn->amn_tx_try3_cnt++; + } else if (retry_count > 3) { + amn->amn_tx_try1_cnt++; + amn->amn_tx_try2_cnt++; + amn->amn_tx_try3_cnt++; + amn->amn_tx_failure_cnt++; + } +} + +void +ath_rate_newassoc(struct ath_softc *sc, struct ath_node *an, int isnew) +{ + if (isnew) + ath_rate_ctl_start(sc, &an->an_node); +} + +static void +node_reset (struct amrr_node *amn) +{ + amn->amn_tx_try0_cnt = 0; + amn->amn_tx_try1_cnt = 0; + amn->amn_tx_try2_cnt = 0; + amn->amn_tx_try3_cnt = 0; + amn->amn_tx_failure_cnt = 0; + amn->amn_success = 0; + amn->amn_recovery = 0; + amn->amn_success_threshold = ath_rate_min_success_threshold; +} + + +/** + * The code below assumes that we are dealing with hardware multi rate retry + * I have no idea what will happen if you try to use this module with another + * type of hardware. Your machine might catch fire or it might work with + * horrible performance... + */ +static void +ath_rate_update(struct ath_softc *sc, struct ieee80211_node *ni, int rate) +{ + struct ath_node *an = ATH_NODE(ni); + struct amrr_node *amn = ATH_NODE_AMRR(an); + const HAL_RATE_TABLE *rt = sc->sc_currates; + u_int8_t rix; + + KASSERT(rt != NULL, ("no rate table, mode %u", sc->sc_curmode)); + + DPRINTF(sc, "%s: set xmit rate for %s to %dM\n", + __func__, ether_sprintf(ni->ni_macaddr), + ni->ni_rates.rs_nrates > 0 ? + (ni->ni_rates.rs_rates[rate] & IEEE80211_RATE_VAL) / 2 : 0); + + ni->ni_txrate = rate; + /* XXX management/control frames always go at the lowest speed */ + an->an_tx_mgtrate = rt->info[0].rateCode; + an->an_tx_mgtratesp = an->an_tx_mgtrate | rt->info[0].shortPreamble; + /* + * Before associating a node has no rate set setup + * so we can't calculate any transmit codes to use. + * This is ok since we should never be sending anything + * but management frames and those always go at the + * lowest hardware rate. + */ + if (ni->ni_rates.rs_nrates > 0) { + amn->amn_tx_rix0 = sc->sc_rixmap[ + ni->ni_rates.rs_rates[rate] & IEEE80211_RATE_VAL]; + amn->amn_tx_rate0 = rt->info[amn->amn_tx_rix0].rateCode; + amn->amn_tx_rate0sp = amn->amn_tx_rate0 | + rt->info[amn->amn_tx_rix0].shortPreamble; + if (sc->sc_mrretry) { + amn->amn_tx_try0 = 1; + amn->amn_tx_try1 = 1; + amn->amn_tx_try2 = 1; + amn->amn_tx_try3 = 1; + if (--rate >= 0) { + rix = sc->sc_rixmap[ + ni->ni_rates.rs_rates[rate]&IEEE80211_RATE_VAL]; + amn->amn_tx_rate1 = rt->info[rix].rateCode; + amn->amn_tx_rate1sp = amn->amn_tx_rate1 | + rt->info[rix].shortPreamble; + } else { + amn->amn_tx_rate1 = amn->amn_tx_rate1sp = 0; + } + if (--rate >= 0) { + rix = sc->sc_rixmap[ + ni->ni_rates.rs_rates[rate]&IEEE80211_RATE_VAL]; + amn->amn_tx_rate2 = rt->info[rix].rateCode; + amn->amn_tx_rate2sp = amn->amn_tx_rate2 | + rt->info[rix].shortPreamble; + } else { + amn->amn_tx_rate2 = amn->amn_tx_rate2sp = 0; + } + if (rate > 0) { + /* NB: only do this if we didn't already do it above */ + amn->amn_tx_rate3 = rt->info[0].rateCode; + amn->amn_tx_rate3sp = + an->an_tx_mgtrate | rt->info[0].shortPreamble; + } else { + amn->amn_tx_rate3 = amn->amn_tx_rate3sp = 0; + } + } else { + amn->amn_tx_try0 = ATH_TXMAXTRY; + /* theorically, these statements are useless because + * the code which uses them tests for an_tx_try0 == ATH_TXMAXTRY + */ + amn->amn_tx_try1 = 0; + amn->amn_tx_try2 = 0; + amn->amn_tx_try3 = 0; + amn->amn_tx_rate1 = amn->amn_tx_rate1sp = 0; + amn->amn_tx_rate2 = amn->amn_tx_rate2sp = 0; + amn->amn_tx_rate3 = amn->amn_tx_rate3sp = 0; + } + } + node_reset (amn); +} + +/* + * Set the starting transmit rate for a node. + */ +static void +ath_rate_ctl_start(struct ath_softc *sc, struct ieee80211_node *ni) +{ +#define RATE(_ix) (ni->ni_rates.rs_rates[(_ix)] & IEEE80211_RATE_VAL) + struct ieee80211com *ic = &sc->sc_ic; + int srate; + + KASSERT(ni->ni_rates.rs_nrates > 0, ("no rates")); + if (ic->ic_fixed_rate == -1) { + /* + * No fixed rate is requested. For 11b start with + * the highest negotiated rate; otherwise, for 11g + * and 11a, we start "in the middle" at 24Mb or 36Mb. + */ + srate = ni->ni_rates.rs_nrates - 1; + if (sc->sc_curmode != IEEE80211_MODE_11B) { + /* + * Scan the negotiated rate set to find the + * closest rate. + */ + /* NB: the rate set is assumed sorted */ + for (; srate >= 0 && RATE(srate) > 72; srate--) + ; + KASSERT(srate >= 0, ("bogus rate set")); + } + } else { + /* + * A fixed rate is to be used; ic_fixed_rate is an + * index into the supported rate set. Convert this + * to the index into the negotiated rate set for + * the node. We know the rate is there because the + * rate set is checked when the station associates. + */ + const struct ieee80211_rateset *rs = + &ic->ic_sup_rates[ic->ic_curmode]; + int r = rs->rs_rates[ic->ic_fixed_rate] & IEEE80211_RATE_VAL; + /* NB: the rate set is assumed sorted */ + srate = ni->ni_rates.rs_nrates - 1; + for (; srate >= 0 && RATE(srate) != r; srate--) + ; + KASSERT(srate >= 0, + ("fixed rate %d not in rate set", ic->ic_fixed_rate)); + } + ath_rate_update(sc, ni, srate); +#undef RATE +} + +static void +ath_rate_cb(void *arg, struct ieee80211_node *ni) +{ + ath_rate_update(ni->ni_ic->ic_ifp->if_softc, ni, (int) arg); +} + +/* + * Reset the rate control state for each 802.11 state transition. + */ +void +ath_rate_newstate(struct ath_softc *sc, enum ieee80211_state state) +{ + struct amrr_softc *asc = (struct amrr_softc *) sc->sc_rc; + struct ieee80211com *ic = &sc->sc_ic; + struct ieee80211_node *ni; + + if (state == IEEE80211_S_INIT) { + callout_stop(&asc->timer); + return; + } + if (ic->ic_opmode == IEEE80211_M_STA) { + /* + * Reset local xmit state; this is really only + * meaningful when operating in station mode. + */ + ni = ic->ic_bss; + if (state == IEEE80211_S_RUN) { + ath_rate_ctl_start(sc, ni); + } else { + ath_rate_update(sc, ni, 0); + } + } else { + /* + * When operating as a station the node table holds + * the AP's that were discovered during scanning. + * For any other operating mode we want to reset the + * tx rate state of each node. + */ + if (ic->ic_sta != NULL) + ieee80211_iterate_nodes(ic->ic_sta, ath_rate_cb, 0); + ath_rate_update(sc, ic->ic_bss, 0); + } + if (ic->ic_fixed_rate == -1 && state == IEEE80211_S_RUN) { + int interval; + /* + * Start the background rate control thread if we + * are not configured to use a fixed xmit rate. + */ + interval = ath_rateinterval; + if (ic->ic_opmode == IEEE80211_M_STA) + interval /= 2; + callout_reset(&asc->timer, (interval * hz) / 1000, + ath_ratectl, &sc->sc_if); + } +} + +/* + * Examine and potentially adjust the transmit rate. + */ +static void +ath_rate_ctl(void *arg, struct ieee80211_node *ni) +{ + struct ath_softc *sc = arg; + struct amrr_node *amn = ATH_NODE_AMRR(ATH_NODE (ni)); + int old_rate; + +#define is_success(amn) \ +(amn->amn_tx_try1_cnt < (amn->amn_tx_try0_cnt/10)) +#define is_enough(amn) \ +(amn->amn_tx_try0_cnt > 10) +#define is_failure(amn) \ +(amn->amn_tx_try1_cnt > (amn->amn_tx_try0_cnt/3)) +#define is_max_rate(ni) \ +((ni->ni_txrate + 1) >= ni->ni_rates.rs_nrates) +#define is_min_rate(ni) \ +(ni->ni_txrate == 0) + + old_rate = ni->ni_txrate; + + DPRINTF (sc, "cnt0: %d cnt1: %d cnt2: %d cnt3: %d -- threshold: %d\n", + amn->amn_tx_try0_cnt, + amn->amn_tx_try1_cnt, + amn->amn_tx_try2_cnt, + amn->amn_tx_try3_cnt, + amn->amn_success_threshold); + if (is_success (amn) && is_enough (amn)) { + amn->amn_success++; + if (amn->amn_success == amn->amn_success_threshold && + !is_max_rate (ni)) { + amn->amn_recovery = 1; + amn->amn_success = 0; + ni->ni_txrate++; + DPRINTF (sc, "increase rate to %d\n", ni->ni_txrate); + } else { + amn->amn_recovery = 0; + } + } else if (is_failure (amn)) { + amn->amn_success = 0; + if (!is_min_rate (ni)) { + if (amn->amn_recovery) { + /* recovery failure. */ + amn->amn_success_threshold *= 2; + amn->amn_success_threshold = min (amn->amn_success_threshold, + (u_int)ath_rate_max_success_threshold); + DPRINTF (sc, "decrease rate recovery thr: %d\n", amn->amn_success_threshold); + } else { + /* simple failure. */ + amn->amn_success_threshold = ath_rate_min_success_threshold; + DPRINTF (sc, "decrease rate normal thr: %d\n", amn->amn_success_threshold); + } + amn->amn_recovery = 0; + ni->ni_txrate--; + } else { + amn->amn_recovery = 0; + } + + } + if (is_enough (amn) || old_rate != ni->ni_txrate) { + /* reset counters. */ + amn->amn_tx_try0_cnt = 0; + amn->amn_tx_try1_cnt = 0; + amn->amn_tx_try2_cnt = 0; + amn->amn_tx_try3_cnt = 0; + amn->amn_tx_failure_cnt = 0; + } + if (old_rate != ni->ni_txrate) { + ath_rate_update(sc, ni, ni->ni_txrate); + } +} + +static void +ath_ratectl(void *arg) +{ + struct ifnet *ifp = arg; + struct ath_softc *sc = ifp->if_softc; + struct amrr_softc *asc = (struct amrr_softc *) sc->sc_rc; + struct ieee80211com *ic = &sc->sc_ic; + int interval; + + if (ifp->if_flags & IFF_RUNNING) { + sc->sc_stats.ast_rate_calls++; + + if (ic->ic_opmode == IEEE80211_M_STA) + ath_rate_ctl(sc, ic->ic_bss); /* NB: no reference */ + else if (ic->ic_sta != NULL) + ieee80211_iterate_nodes(ic, ath_rate_ctl, sc); + } + interval = ath_rateinterval; + if (ic->ic_opmode == IEEE80211_M_STA) + interval /= 2; + callout_reset(&asc->timer, (interval * hz) / 1000, + ath_ratectl, &sc->sc_if); +} + +static void +ath_rate_sysctlattach(struct ath_softc *sc) +{ + struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(sc->sc_dev); + struct sysctl_oid *tree = device_get_sysctl_tree(sc->sc_dev); + + SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, + "rate_interval", CTLFLAG_RW, &ath_rateinterval, 0, + "rate control: operation interval (ms)"); + /* XXX bounds check values */ + SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, + "max_sucess_threshold", CTLFLAG_RW, + &ath_rate_max_success_threshold, 0, ""); + SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, + "min_sucess_threshold", CTLFLAG_RW, + &ath_rate_min_success_threshold, 0, ""); +} + +struct ath_ratectrl * +ath_rate_attach(struct ath_softc *sc) +{ + struct amrr_softc *asc; + + asc = malloc(sizeof(struct amrr_softc), M_DEVBUF, M_NOWAIT|M_ZERO); + if (asc == NULL) + return NULL; + asc->arc.arc_space = sizeof(struct amrr_node); + callout_init(&asc->timer, debug_mpsafenet ? CALLOUT_MPSAFE : 0); + ath_rate_sysctlattach(sc); + + return &asc->arc; +} + +void +ath_rate_detach(struct ath_ratectrl *arc) +{ + struct amrr_softc *asc = (struct amrr_softc *) arc; + + callout_drain(&asc->timer); + free(asc, M_DEVBUF); +} + +/* + * Module glue. + */ +static int +amrr_modevent(module_t mod, int type, void *unused) +{ + switch (type) { + case MOD_LOAD: + if (bootverbose) + printf("ath_rate: <AMRR rate control algorithm> version 0.1\n"); + return 0; + case MOD_UNLOAD: + return 0; + } + return EINVAL; +} + +static moduledata_t amrr_mod = { + "ath_rate", + amrr_modevent, + 0 +}; +DECLARE_MODULE(ath_rate, amrr_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST); +MODULE_VERSION(ath_rate, 1); +MODULE_DEPEND(ath_rate, wlan, 1, 1, 1); diff --git a/sys/dev/ath/ath_rate/amrr/amrr.h b/sys/dev/ath/ath_rate/amrr/amrr.h new file mode 100644 index 0000000..2d0d7fd --- /dev/null +++ b/sys/dev/ath/ath_rate/amrr/amrr.h @@ -0,0 +1,77 @@ +/*- + * Copyright (c) 2004 INRIA + * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer, + without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any + * redistribution must be conditioned upon including a substantially + * similar Disclaimer requirement for further binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY + * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, + * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER + * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGES. + * + * $FreeBSD$ + */ + +#ifndef _DEV_ATH_RATE_AMRR_H +#define _DEV_ATH_RATE_AMRR_H + +/* per-device state */ +struct amrr_softc { + struct ath_ratectrl arc; /* base state */ + struct callout timer; /* periodic timer */ +}; + +/* per-node state */ +struct amrr_node { + /* AMRR statistics for this node */ + u_int amn_tx_try0_cnt; + u_int amn_tx_try1_cnt; + u_int amn_tx_try2_cnt; + u_int amn_tx_try3_cnt; + u_int amn_tx_failure_cnt; + /* AMRR algorithm state for this node */ + u_int amn_success_threshold; + u_int amn_success; + u_int amn_recovery; + /* rate index et al. */ + u_int8_t amn_tx_rix0; /* series 0 rate index */ + u_int8_t amn_tx_rate0; /* series 0 h/w rate */ + u_int8_t amn_tx_rate1; /* series 1 h/w rate */ + u_int8_t amn_tx_rate2; /* series 2 h/w rate */ + u_int8_t amn_tx_rate3; /* series 3 h/w rate */ + u_int8_t amn_tx_rate0sp; /* series 0 short preamble h/w rate */ + u_int8_t amn_tx_rate1sp; /* series 1 short preamble h/w rate */ + u_int8_t amn_tx_rate2sp; /* series 2 short preamble h/w rate */ + u_int8_t amn_tx_rate3sp; /* series 3 short preamble h/w rate */ + u_int8_t amn_tx_try0; /* series 0 try count */ + u_int amn_tx_try1; /* series 1 try count */ + u_int amn_tx_try2; /* series 2 try count */ + u_int amn_tx_try3; /* series 3 try count */ +}; +#define ATH_NODE_AMRR(an) ((struct amrr_node *)&an[1]) +#endif /* _DEV_ATH_RATE_AMRR_H */ diff --git a/sys/dev/ath/ath_rate/onoe/onoe.c b/sys/dev/ath/ath_rate/onoe/onoe.c new file mode 100644 index 0000000..5f1c71a --- /dev/null +++ b/sys/dev/ath/ath_rate/onoe/onoe.c @@ -0,0 +1,527 @@ +/*- + * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer, + * without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any + * redistribution must be conditioned upon including a substantially + * similar Disclaimer requirement for further binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY + * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, + * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER + * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGES. + */ + +#include <sys/cdefs.h> +__FBSDID("$FreeBSD$"); + +/* + * Atsushi Onoe's rate control algorithm. + */ +#include "opt_inet.h" + +#include <sys/param.h> +#include <sys/systm.h> +#include <sys/sysctl.h> +#include <sys/module.h> +#include <sys/kernel.h> +#include <sys/lock.h> +#include <sys/mutex.h> +#include <sys/errno.h> + +#include <machine/bus.h> +#include <machine/resource.h> +#include <sys/bus.h> + +#include <sys/socket.h> + +#include <net/if.h> +#include <net/if_media.h> +#include <net/if_arp.h> +#include <net/ethernet.h> /* XXX for ether_sprintf */ + +#include <net80211/ieee80211_var.h> + +#include <net/bpf.h> + +#ifdef INET +#include <netinet/in.h> +#include <netinet/if_ether.h> +#endif + +#include <dev/ath/if_athvar.h> +#include <dev/ath/ath_rate/onoe/onoe.h> +#include <contrib/dev/ath/ah_desc.h> + +#define ONOE_DEBUG +#ifdef ONOE_DEBUG +enum { + ATH_DEBUG_RATE = 0x00000010, /* rate control */ +}; +#define DPRINTF(sc, _fmt, ...) do { \ + if (sc->sc_debug & ATH_DEBUG_RATE) \ + printf(_fmt, __VA_ARGS__); \ +} while (0) +#else +#define DPRINTF(sc, _fmt, ...) +#endif + +/* + * Default parameters for the rate control algorithm. These are + * all tunable with sysctls. The rate controller runs periodically + * (each ath_rateinterval ms) analyzing transmit statistics for each + * neighbor/station (when operating in station mode this is only the AP). + * If transmits look to be working well over a sampling period then + * it gives a "raise rate credit". If transmits look to not be working + * well than it deducts a credit. If the credits cross a threshold then + * the transmit rate is raised. Various error conditions force the + * the transmit rate to be dropped. + * + * The decision to issue/deduct a credit is based on the errors and + * retries accumulated over the sampling period. ath_rate_raise defines + * the percent of retransmits for which a credit is issued/deducted. + * ath_rate_raise_threshold defines the threshold on credits at which + * the transmit rate is increased. + * + * XXX this algorithm is flawed. + */ +static int ath_rateinterval = 1000; /* rate ctl interval (ms) */ +static int ath_rate_raise = 10; /* add credit threshold */ +static int ath_rate_raise_threshold = 10; /* rate ctl raise threshold */ + +static void ath_ratectl(void *); +static void ath_rate_update(struct ath_softc *, struct ieee80211_node *, + int rate); +static void ath_rate_ctl_start(struct ath_softc *, struct ieee80211_node *); +static void ath_rate_ctl(void *, struct ieee80211_node *); + +void +ath_rate_node_init(struct ath_softc *sc, struct ath_node *an) +{ + /* NB: assumed to be zero'd by caller */ + ath_rate_update(sc, &an->an_node, 0); +} + +void +ath_rate_node_cleanup(struct ath_softc *sc, struct ath_node *an) +{ +} + +void +ath_rate_findrate(struct ath_softc *sc, struct ath_node *an, + HAL_BOOL shortPreamble, size_t frameLen, + u_int8_t *rix, int *try0, u_int8_t *txrate) +{ + struct onoe_node *on = ATH_NODE_ONOE(an); + + *rix = on->on_tx_rix0; + *try0 = on->on_tx_try0; + if (shortPreamble) + *txrate = on->on_tx_rate0sp; + else + *txrate = on->on_tx_rate0; +} + +void +ath_rate_setupxtxdesc(struct ath_softc *sc, struct ath_node *an, + struct ath_desc *ds, HAL_BOOL shortPreamble, u_int8_t rix) +{ + struct onoe_node *on = ATH_NODE_ONOE(an); + + ath_hal_setupxtxdesc(sc->sc_ah, ds + , on->on_tx_rate1sp, 2 /* series 1 */ + , on->on_tx_rate2sp, 2 /* series 2 */ + , on->on_tx_rate3sp, 2 /* series 3 */ + ); +} + +void +ath_rate_tx_complete(struct ath_softc *sc, + struct ath_node *an, const struct ath_desc *ds) +{ + struct onoe_node *on = ATH_NODE_ONOE(an); + + if (ds->ds_txstat.ts_status == 0) + on->on_tx_ok++; + else + on->on_tx_err++; + on->on_tx_retr += ds->ds_txstat.ts_shortretry + + ds->ds_txstat.ts_longretry; +} + +void +ath_rate_newassoc(struct ath_softc *sc, struct ath_node *an, int isnew) +{ + if (isnew) + ath_rate_ctl_start(sc, &an->an_node); +} + +static void +ath_rate_update(struct ath_softc *sc, struct ieee80211_node *ni, int rate) +{ + struct ath_node *an = ATH_NODE(ni); + struct onoe_node *on = ATH_NODE_ONOE(an); + const HAL_RATE_TABLE *rt = sc->sc_currates; + u_int8_t rix; + + KASSERT(rt != NULL, ("no rate table, mode %u", sc->sc_curmode)); + + DPRINTF(sc, "%s: set xmit rate for %s to %dM\n", + __func__, ether_sprintf(ni->ni_macaddr), + ni->ni_rates.rs_nrates > 0 ? + (ni->ni_rates.rs_rates[rate] & IEEE80211_RATE_VAL) / 2 : 0); + + ni->ni_txrate = rate; + /* XXX management/control frames always go at the lowest speed */ + an->an_tx_mgtrate = rt->info[0].rateCode; + an->an_tx_mgtratesp = an->an_tx_mgtrate | rt->info[0].shortPreamble; + /* + * Before associating a node has no rate set setup + * so we can't calculate any transmit codes to use. + * This is ok since we should never be sending anything + * but management frames and those always go at the + * lowest hardware rate. + */ + if (ni->ni_rates.rs_nrates == 0) + goto done; + on->on_tx_rix0 = sc->sc_rixmap[ + ni->ni_rates.rs_rates[rate] & IEEE80211_RATE_VAL]; + on->on_tx_rate0 = rt->info[on->on_tx_rix0].rateCode; + + on->on_tx_rate0sp = on->on_tx_rate0 | + rt->info[on->on_tx_rix0].shortPreamble; + if (sc->sc_mrretry) { + /* + * Hardware supports multi-rate retry; setup two + * step-down retry rates and make the lowest rate + * be the ``last chance''. We use 4, 2, 2, 2 tries + * respectively (4 is set here, the rest are fixed + * in the xmit routine). + */ + on->on_tx_try0 = 1 + 3; /* 4 tries at rate 0 */ + if (--rate >= 0) { + rix = sc->sc_rixmap[ + ni->ni_rates.rs_rates[rate]&IEEE80211_RATE_VAL]; + on->on_tx_rate1 = rt->info[rix].rateCode; + on->on_tx_rate1sp = on->on_tx_rate1 | + rt->info[rix].shortPreamble; + } else { + on->on_tx_rate1 = on->on_tx_rate1sp = 0; + } + if (--rate >= 0) { + rix = sc->sc_rixmap[ + ni->ni_rates.rs_rates[rate]&IEEE80211_RATE_VAL]; + on->on_tx_rate2 = rt->info[rix].rateCode; + on->on_tx_rate2sp = on->on_tx_rate2 | + rt->info[rix].shortPreamble; + } else { + on->on_tx_rate2 = on->on_tx_rate2sp = 0; + } + if (rate > 0) { + /* NB: only do this if we didn't already do it above */ + on->on_tx_rate3 = rt->info[0].rateCode; + on->on_tx_rate3sp = + an->an_tx_mgtrate | rt->info[0].shortPreamble; + } else { + on->on_tx_rate3 = on->on_tx_rate3sp = 0; + } + } else { + on->on_tx_try0 = ATH_TXMAXTRY; /* max tries at rate 0 */ + on->on_tx_rate1 = on->on_tx_rate1sp = 0; + on->on_tx_rate2 = on->on_tx_rate2sp = 0; + on->on_tx_rate3 = on->on_tx_rate3sp = 0; + } +done: + on->on_tx_ok = on->on_tx_err = on->on_tx_retr = on->on_tx_upper = 0; +} + +/* + * Set the starting transmit rate for a node. + */ +static void +ath_rate_ctl_start(struct ath_softc *sc, struct ieee80211_node *ni) +{ +#define RATE(_ix) (ni->ni_rates.rs_rates[(_ix)] & IEEE80211_RATE_VAL) + struct ieee80211com *ic = &sc->sc_ic; + int srate; + + KASSERT(ni->ni_rates.rs_nrates > 0, ("no rates")); + if (ic->ic_fixed_rate == -1) { + /* + * No fixed rate is requested. For 11b start with + * the highest negotiated rate; otherwise, for 11g + * and 11a, we start "in the middle" at 24Mb or 36Mb. + */ + srate = ni->ni_rates.rs_nrates - 1; + if (sc->sc_curmode != IEEE80211_MODE_11B) { + /* + * Scan the negotiated rate set to find the + * closest rate. + */ + /* NB: the rate set is assumed sorted */ + for (; srate >= 0 && RATE(srate) > 72; srate--) + ; + KASSERT(srate >= 0, ("bogus rate set")); + } + } else { + /* + * A fixed rate is to be used; ic_fixed_rate is an + * index into the supported rate set. Convert this + * to the index into the negotiated rate set for + * the node. We know the rate is there because the + * rate set is checked when the station associates. + */ + const struct ieee80211_rateset *rs = + &ic->ic_sup_rates[ic->ic_curmode]; + int r = rs->rs_rates[ic->ic_fixed_rate] & IEEE80211_RATE_VAL; + /* NB: the rate set is assumed sorted */ + srate = ni->ni_rates.rs_nrates - 1; + for (; srate >= 0 && RATE(srate) != r; srate--) + ; + KASSERT(srate >= 0, + ("fixed rate %d not in rate set", ic->ic_fixed_rate)); + } + ath_rate_update(sc, ni, srate); +#undef RATE +} + +static void +ath_rate_cb(void *arg, struct ieee80211_node *ni) +{ + ath_rate_update(ni->ni_ic->ic_ifp->if_softc, ni, (int) arg); +} + +/* + * Reset the rate control state for each 802.11 state transition. + */ +void +ath_rate_newstate(struct ath_softc *sc, enum ieee80211_state state) +{ + struct onoe_softc *osc = (struct onoe_softc *) sc->sc_rc; + struct ieee80211com *ic = &sc->sc_ic; + struct ieee80211_node *ni; + + if (state == IEEE80211_S_INIT) { + callout_stop(&osc->timer); + return; + } + if (ic->ic_opmode == IEEE80211_M_STA) { + /* + * Reset local xmit state; this is really only + * meaningful when operating in station mode. + */ + ni = ic->ic_bss; + if (state == IEEE80211_S_RUN) { + ath_rate_ctl_start(sc, ni); + } else { + ath_rate_update(sc, ni, 0); + } + } else { + /* + * When operating as a station the node table holds + * the AP's that were discovered during scanning. + * For any other operating mode we want to reset the + * tx rate state of each node. + */ + if (ic->ic_sta != NULL) + ieee80211_iterate_nodes(ic->ic_sta, ath_rate_cb, 0); + ath_rate_update(sc, ic->ic_bss, 0); + } + if (ic->ic_fixed_rate == -1 && state == IEEE80211_S_RUN) { + int interval; + /* + * Start the background rate control thread if we + * are not configured to use a fixed xmit rate. + */ + interval = ath_rateinterval; + if (ic->ic_opmode == IEEE80211_M_STA) + interval /= 2; + callout_reset(&osc->timer, (interval * hz) / 1000, + ath_ratectl, &sc->sc_if); + } +} + +/* + * Examine and potentially adjust the transmit rate. + */ +static void +ath_rate_ctl(void *arg, struct ieee80211_node *ni) +{ + struct ath_softc *sc = arg; + struct onoe_node *on = ATH_NODE_ONOE(ATH_NODE(ni)); + struct ieee80211_rateset *rs = &ni->ni_rates; + int dir = 0, nrate, enough; + + /* + * Rate control + * XXX: very primitive version. + */ + enough = (on->on_tx_ok + on->on_tx_err >= 10); + + /* no packet reached -> down */ + if (on->on_tx_err > 0 && on->on_tx_ok == 0) + dir = -1; + + /* all packets needs retry in average -> down */ + if (enough && on->on_tx_ok < on->on_tx_retr) + dir = -1; + + /* no error and less than rate_raise% of packets need retry -> up */ + if (enough && on->on_tx_err == 0 && + on->on_tx_retr < (on->on_tx_ok * ath_rate_raise) / 100) + dir = 1; + + DPRINTF(sc, "%s: ok %d err %d retr %d upper %d dir %d\n", + ether_sprintf(ni->ni_macaddr), + on->on_tx_ok, on->on_tx_err, on->on_tx_retr, + on->on_tx_upper, dir); + + nrate = ni->ni_txrate; + switch (dir) { + case 0: + if (enough && on->on_tx_upper > 0) + on->on_tx_upper--; + break; + case -1: + if (nrate > 0) { + nrate--; + sc->sc_stats.ast_rate_drop++; + } + on->on_tx_upper = 0; + break; + case 1: + /* raise rate if we hit rate_raise_threshold */ + if (++on->on_tx_upper < ath_rate_raise_threshold) + break; + on->on_tx_upper = 0; + if (nrate + 1 < rs->rs_nrates) { + nrate++; + sc->sc_stats.ast_rate_raise++; + } + break; + } + + if (nrate != ni->ni_txrate) { + DPRINTF(sc, "%s: %dM -> %dM (%d ok, %d err, %d retr)\n", + __func__, + (rs->rs_rates[ni->ni_txrate] & IEEE80211_RATE_VAL) / 2, + (rs->rs_rates[nrate] & IEEE80211_RATE_VAL) / 2, + on->on_tx_ok, on->on_tx_err, on->on_tx_retr); + ath_rate_update(sc, ni, nrate); + } else if (enough) + on->on_tx_ok = on->on_tx_err = on->on_tx_retr = 0; +} + +static void +ath_ratectl(void *arg) +{ + struct ifnet *ifp = arg; + struct ath_softc *sc = ifp->if_softc; + struct onoe_softc *osc = (struct onoe_softc *) sc->sc_rc; + struct ieee80211com *ic = &sc->sc_ic; + int interval; + + if (ifp->if_flags & IFF_RUNNING) { + sc->sc_stats.ast_rate_calls++; + + if (ic->ic_opmode == IEEE80211_M_STA) + ath_rate_ctl(sc, ic->ic_bss); /* NB: no reference */ + else if (ic->ic_sta != NULL) + ieee80211_iterate_nodes(ic->ic_sta, ath_rate_ctl, sc); + } + interval = ath_rateinterval; + if (ic->ic_opmode == IEEE80211_M_STA) + interval /= 2; + callout_reset(&osc->timer, (interval * hz) / 1000, + ath_ratectl, &sc->sc_if); +} + +static void +ath_rate_sysctlattach(struct ath_softc *sc) +{ + struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(sc->sc_dev); + struct sysctl_oid *tree = device_get_sysctl_tree(sc->sc_dev); + + SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, + "rate_interval", CTLFLAG_RW, &ath_rateinterval, 0, + "rate control: operation interval (ms)"); + /* XXX bounds check values */ + SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, + "rate_raise", CTLFLAG_RW, &ath_rate_raise, 0, + "rate control: retry threshold to credit rate raise (%%)"); + SYSCTL_ADD_INT(ctx, SYSCTL_CHILDREN(tree), OID_AUTO, + "rate_raise_threshold", CTLFLAG_RW, &ath_rate_raise_threshold,0, + "rate control: # good periods before raising rate"); +} + +struct ath_ratectrl * +ath_rate_attach(struct ath_softc *sc) +{ + struct onoe_softc *osc; + + osc = malloc(sizeof(struct onoe_softc), M_DEVBUF, M_NOWAIT|M_ZERO); + if (osc == NULL) + return NULL; + osc->arc.arc_space = sizeof(struct onoe_node); + callout_init(&osc->timer, debug_mpsafenet ? CALLOUT_MPSAFE : 0); + ath_rate_sysctlattach(sc); + + return &osc->arc; +} + +void +ath_rate_detach(struct ath_ratectrl *arc) +{ + struct onoe_softc *osc = (struct onoe_softc *) arc; + + callout_drain(&osc->timer); + free(osc, M_DEVBUF); +} + +/* + * Module glue. + */ +static int +onoe_modevent(module_t mod, int type, void *unused) +{ + switch (type) { + case MOD_LOAD: + if (bootverbose) + printf("ath_rate: <Atsushi Onoe's rate control algorithm>\n"); + return 0; + case MOD_UNLOAD: + return 0; + } + return EINVAL; +} + +static moduledata_t onoe_mod = { + "ath_rate", + onoe_modevent, + 0 +}; +DECLARE_MODULE(ath_rate, onoe_mod, SI_SUB_DRIVERS, SI_ORDER_FIRST); +MODULE_VERSION(ath_rate, 1); +MODULE_DEPEND(ath_rate, wlan, 1, 1, 1); diff --git a/sys/dev/ath/ath_rate/onoe/onoe.h b/sys/dev/ath/ath_rate/onoe/onoe.h new file mode 100644 index 0000000..f6164b4 --- /dev/null +++ b/sys/dev/ath/ath_rate/onoe/onoe.h @@ -0,0 +1,69 @@ +/*- + * Copyright (c) 2002-2004 Sam Leffler, Errno Consulting + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer, + without modification. + * 2. Redistributions in binary form must reproduce at minimum a disclaimer + * similar to the "NO WARRANTY" disclaimer below ("Disclaimer") and any + * redistribution must be conditioned upon including a substantially + * similar Disclaimer requirement for further binary redistribution. + * 3. Neither the names of the above-listed copyright holders nor the names + * of any contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * Alternatively, this software may be distributed under the terms of the + * GNU General Public License ("GPL") version 2 as published by the Free + * Software Foundation. + * + * NO WARRANTY + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF NONINFRINGEMENT, MERCHANTIBILITY + * AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL + * THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, + * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER + * IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF + * THE POSSIBILITY OF SUCH DAMAGES. + * + * $FreeBSD$ + */ + +/* + * Defintions for the Atheros Wireless LAN controller driver. + */ +#ifndef _DEV_ATH_RATE_ONOE_H +#define _DEV_ATH_RATE_ONOE_H + +/* per-device state */ +struct onoe_softc { + struct ath_ratectrl arc; /* base state */ + struct callout timer; /* periodic timer */ +}; + +/* per-node state */ +struct onoe_node { + u_int on_tx_ok; /* tx ok pkt */ + u_int on_tx_err; /* tx !ok pkt */ + u_int on_tx_retr; /* tx retry count */ + int on_tx_upper; /* tx upper rate req cnt */ + u_int8_t on_tx_rix0; /* series 0 rate index */ + u_int8_t on_tx_try0; /* series 0 try count */ + u_int8_t on_tx_rate0; /* series 0 h/w rate */ + u_int8_t on_tx_rate1; /* series 1 h/w rate */ + u_int8_t on_tx_rate2; /* series 2 h/w rate */ + u_int8_t on_tx_rate3; /* series 3 h/w rate */ + u_int8_t on_tx_rate0sp; /* series 0 short preamble h/w rate */ + u_int8_t on_tx_rate1sp; /* series 1 short preamble h/w rate */ + u_int8_t on_tx_rate2sp; /* series 2 short preamble h/w rate */ + u_int8_t on_tx_rate3sp; /* series 3 short preamble h/w rate */ +}; +#define ATH_NODE_ONOE(an) ((struct onoe_node *)&an[1]) +#endif /* _DEV_ATH_RATE_ONOE_H */ |