summaryrefslogtreecommitdiffstats
path: root/sys/dev/xe
diff options
context:
space:
mode:
authorobrien <obrien@FreeBSD.org>1999-06-22 19:19:46 +0000
committerobrien <obrien@FreeBSD.org>1999-06-22 19:19:46 +0000
commit28ec06e8776d943f63fb715f1268b46e38d81c0a (patch)
treebe18c596ac450e1cd0ce4ab661ba0f4d356e6a0c /sys/dev/xe
parent8b6052a98b3651b94f9a6a96d2bece9e0734c6a5 (diff)
downloadFreeBSD-src-28ec06e8776d943f63fb715f1268b46e38d81c0a.zip
FreeBSD-src-28ec06e8776d943f63fb715f1268b46e38d81c0a.tar.gz
Fix conflicts.
Diffstat (limited to 'sys/dev/xe')
-rw-r--r--sys/dev/xe/if_xe.c333
-rw-r--r--sys/dev/xe/if_xereg.h1
2 files changed, 214 insertions, 120 deletions
diff --git a/sys/dev/xe/if_xe.c b/sys/dev/xe/if_xe.c
index 88af576..85735fb 100644
--- a/sys/dev/xe/if_xe.c
+++ b/sys/dev/xe/if_xe.c
@@ -23,8 +23,8 @@
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
- * $Author_Id: if_xe.c,v 1.19 1999/04/15 22:15:53 scott Exp $
- * $Id: if_xe.c,v 1.19 1999/04/15 22:15:53 scott Exp $
+ * $Id: if_xe.c,v 1.20 1999/06/13 19:17:40 scott Exp $
+ * $FreeBSD$
*/
/*
@@ -64,7 +64,9 @@
* FreeBSD device driver for Xircom CreditCard PCMCIA Ethernet adapters. The
* following cards are currently known to work with the driver:
* Xircom CreditCard 10/100 (CE3)
+ * Xircom CreditCard Ethernet + Modem 28 (CEM28)
* Xircom CreditCard Ethernet 10/100 + Modem 56 (CEM56)
+ * Xircom RealPort Ethernet 10
* Xircom RealPort Ethernet 10/100
* Xircom RealPort Ethernet 10/100 + Modem 56 (REM56, REM56G)
* Intel EtherExpress Pro/100 PC Card Mobile Adapter 16 (Pro/100 M16A)
@@ -97,7 +99,7 @@
*/
-#define XE_DEBUG 1
+#define XE_DEBUG 1 /* Increase for more voluminous output! */
#include "xe.h"
#include "card.h"
@@ -152,8 +154,8 @@
struct xe_softc {
struct arpcom arpcom;
struct ifmedia ifmedia;
- struct callout_handle chand;
struct ifmib_iso_8802_3 mibdata;
+ struct callout_handle chand;
struct isa_device *dev;
struct pccard_devinfo *crd;
struct ifnet *ifp;
@@ -163,14 +165,16 @@ struct xe_softc {
int unit; /* Unit number, from dev->id_unit */
int srev; /* Silicon revision */
int tx_queued; /* Packets currently waiting to transmit */
- int tx_ptr; /* Last value of PTR reg on card */
+ int tx_tpr; /* Last value of TPR reg on card */
int tx_collisions; /* Collisions since last successful send */
int tx_timeouts; /* Count of transmit timeouts */
int autoneg_status; /* Autonegotiation progress state */
int media; /* Private media word */
- u_char modem; /* 1 = Multifunction card with modem */
- u_char ce3; /* 1 = CE3 class (100Mbit) adapter */
- u_char cem56; /* 1 = CEM56 class (CE3 + 56Kbps modem) adapter */
+ u_char version; /* Bonding Version register from card */
+ u_char modem; /* 1 = Card has a modem */
+ u_char ce2; /* 1 = Card has CE2 silicon */
+ u_char mohawk; /* 1 = Card has Mohawk (CE3) silicon */
+ u_char dingo; /* 1 = Card has Dingo (CEM56) silicon */
u_char phy_ok; /* 1 = MII-compliant PHY found and initialised */
u_char gone; /* 1 = Card bailed out */
#if NAPM > 0
@@ -180,7 +184,6 @@ struct xe_softc {
};
static struct xe_softc *sca[MAXSLOT];
-static int iob[MAXSLOT]; /* XXX - very gross */
/*
@@ -202,7 +205,7 @@ struct xe_mii_frame {
#define XE_INW(r) inw(scp->dev->id_iobase+(r))
#define XE_OUTB(r, b) outb(scp->dev->id_iobase+(r), (b))
#define XE_OUTW(r, w) outw(scp->dev->id_iobase+(r), (w))
-#define XE_SELECT_PAGE(p) XE_OUTB(XE_PSR, (p))
+#define XE_SELECT_PAGE(p) XE_OUTB(XE_PR, (p))
/*
* Horrid stuff for accessing CIS tuples
@@ -246,6 +249,8 @@ static void xe_setmulti (struct xe_softc *scp);
static void xe_setaddrs (struct xe_softc *scp);
static int xe_pio_write_packet (struct xe_softc *scp, struct mbuf *mbp);
static void xe_card_unload (struct pccard_devinfo *devi);
+static u_int32_t xe_compute_crc (u_int8_t *data, int len);
+static int xe_compute_hashbit (u_int32_t crc);
/*
* MII functions
@@ -319,10 +324,9 @@ struct isa_driver xedriver = {
static int
xe_probe (struct isa_device *dev) {
#ifdef XE_DEBUG
- printf("xe%d: probe, iobase = %#x\n", dev->id_unit, dev->id_iobase);
+ printf("xe%d: probe\n", dev->id_unit);
#endif
bzero(sca, MAXSLOT * sizeof(sca[0]));
- iob[dev->id_unit] = dev->id_iobase;
return 0;
}
@@ -404,24 +408,32 @@ xe_cem56fix(struct xe_softc *scp)
/* allocate a new I/O slot for the ethernet */
/* XXX: ctrl->mapio() always appears to return 0 (success), so
* this may cause problems if another device is listening
- * on 0x300 already
+ * on 0x300 already. In this case, you should choose a
+ * known free I/O port address in the kernel config line
+ * for the driver. It will be picked up here and used
+ * instead of the autodetected value.
*/
slt->io[1].window = 1;
slt->io[1].flags = IODF_WS|IODF_16BIT|IODF_ZEROWS|IODF_ACTIVE;
slt->io[1].size = 0x10;
- if (iob[scp->unit] == -1) {
- for (ioport = 0x300; ioport < 0x400; ioport += 0x10) {
- slt->io[1].start = ioport;
- if ((fail = ctrl->mapio( slt, 1 )) == 0)
- break;
- }
- }
- else {
- ioport = iob[scp->unit];
+
+#ifdef XE_IOBASE
+
+ printf( "xe%d: user requested ioport 0x%x\n", scp->unit, XE_IOBASE );
+ ioport = XE_IOBASE;
+ slt->io[1].start = ioport;
+ fail = ctrl->mapio(slt, 1);
+
+#else
+
+ for (ioport = 0x300; ioport < 0x400; ioport += 0x10) {
slt->io[1].start = ioport;
- fail = ctrl->mapio(slt, 1);
+ if ((fail = ctrl->mapio( slt, 1 )) == 0)
+ break;
}
+#endif
+
/* did we find one? */
if (fail) {
printf( "xe%d: xe_cem56fix: no free address space\n", scp->unit );
@@ -430,22 +442,23 @@ xe_cem56fix(struct xe_softc *scp)
/* munge the id_iobase entry for use by the rest of the driver */
-#ifdef XE_DEBUG
+#if XE_DEBUG > 1
printf( "xe%d: using 0x%x for RealPort ethernet\n", scp->unit, ioport );
#endif
scp->dev->id_iobase = ioport;
scp->dev->id_alive = 0x10;
/* magic to set up the ethernet */
- xe_memwrite( devi, 0x800, 0x47 );
- xe_memwrite( devi, 0x80a, ioport & 0xff );
- xe_memwrite( devi, 0x80c, (ioport >> 8) & 0xff );
+ xe_memwrite( devi, DINGO_ECOR, DINGO_ECOR_IRQ_LEVEL|DINGO_ECOR_INT_ENABLE|
+ DINGO_ECOR_IOB_ENABLE|DINGO_ECOR_ETH_ENABLE );
+ xe_memwrite( devi, DINGO_EBAR0, ioport & 0xff );
+ xe_memwrite( devi, DINGO_EBAR1, (ioport >> 8) & 0xff );
- xe_memwrite( devi, 0x820, 0x01 );
- xe_memwrite( devi, 0x822, 0x0c );
- xe_memwrite( devi, 0x824, 0x00 );
- xe_memwrite( devi, 0x826, 0x00 );
- xe_memwrite( devi, 0x828, 0x00 );
+ xe_memwrite( devi, DINGO_DCOR0, DINGO_DCOR0_SF_INT );
+ xe_memwrite( devi, DINGO_DCOR1, DINGO_DCOR1_INT_LEVEL|DINGO_DCOR1_EEDIO );
+ xe_memwrite( devi, DINGO_DCOR2, 0x00 );
+ xe_memwrite( devi, DINGO_DCOR3, 0x00 );
+ xe_memwrite( devi, DINGO_DCOR4, 0x00 );
/* success! */
return 0;
@@ -479,13 +492,13 @@ xe_card_init(struct pccard_devinfo *devi)
/* Check that unit number is OK */
if (unit > MAXSLOT) {
- printf("xe: bad unit (%d)\n", unit);
+ printf("xe%d: bad unit\n", unit);
return (ENODEV);
}
/* Don't attach an active device */
if (scp && !scp->gone) {
- printf("xe: unit already attached (%d)\n", unit);
+ printf("xe%d: already attached\n", unit);
return (EBUSY);
}
@@ -512,17 +525,16 @@ xe_card_init(struct pccard_devinfo *devi)
/*
* Read tuples one at a time into buf. Sucks, but it only happens once.
- * XXX - If the stuff we need isn't in attribute memory, or (worse yet)
- * XXX - attribute memory isn't mapped, we're FUBAR. Maybe need to do an
- * XXX - ioctl on the card device and follow links?
- * XXX - Not really the driver's problem, PCCARD should handle all this!
+ * XXX - This assumes that attribute has been mapped by pccardd, which
+ * XXX - seems to be the default situation. If not, we're well and truly
+ * XXX - FUBAR. This is a general PCCARD problem, not our fault :)
*/
if ((rc = xe_memread( devi, offs, buf, CISTPL_BUFSIZE )) == 0) {
switch (CISTPL_TYPE(buf)) {
case 0x15: /* Grab version string (needed to ID some weird CE2's) */
-#ifdef XE_DEBUG
+#if XE_DEBUG > 1
printf("xe%d: Got version string (0x15)\n", unit);
#endif
for (i = 0; i < CISTPL_LEN(buf); ver_str[i] = CISTPL_DATA(buf, i++));
@@ -532,7 +544,7 @@ xe_card_init(struct pccard_devinfo *devi)
break;
case 0x20: /* Figure out what type of card we have */
-#ifdef XE_DEBUG
+#if XE_DEBUG > 1
printf("xe%d: Got card ID (0x20)\n", unit);
#endif
vendor = CISTPL_DATA(buf, 0) + (CISTPL_DATA(buf, 1) << 8);
@@ -553,14 +565,14 @@ xe_card_init(struct pccard_devinfo *devi)
}
if (!((prod & 0x40) && (media & 0x01))) {
-#ifdef XE_DEBUG
+#if XE_DEBUG > 1
printf("xe%d: Not a PCMCIA Ethernet card!\n", unit);
#endif
rc = ENODEV; /* Not a PCMCIA Ethernet device */
}
else {
if (media & 0x10) { /* Ethernet/modem cards */
-#ifdef XE_DEBUG
+#if XE_DEBUG > 1
printf("xe%d: Card is Ethernet/modem combo\n", unit);
#endif
scp->modem = 1;
@@ -568,34 +580,38 @@ xe_card_init(struct pccard_devinfo *devi)
case 1:
scp->card_type = "CEM"; break;
case 2:
+ scp->ce2 = 1;
scp->card_type = "CEM2"; break;
case 3:
+ scp->ce2 = 1;
scp->card_type = "CEM3"; break;
case 4:
+ scp->ce2 = 1;
scp->card_type = "CEM33"; break;
case 5:
- scp->ce3 = 1;
+ scp->mohawk = 1;
scp->card_type = "CEM56M"; break;
case 6:
case 7: /* Some kind of RealPort card */
- scp->ce3 = 1;
- scp->cem56 = 1;
+ scp->mohawk = 1;
+ scp->dingo = 1;
scp->card_type = "CEM56"; break;
default:
rc = ENODEV;
}
}
else { /* Ethernet-only cards */
-#ifdef XE_DEBUG
+#if XE_DEBUG > 1
printf("xe%d: Card is Ethernet only\n", unit);
#endif
switch (prod & 0x0f) {
case 1:
scp->card_type = "CE"; break;
case 2:
+ scp->ce2 = 1;
scp->card_type = "CE2"; break;
case 3:
- scp->ce3 = 1;
+ scp->mohawk = 1;
scp->card_type = "CE3"; break;
default:
rc = ENODEV;
@@ -606,12 +622,12 @@ xe_card_init(struct pccard_devinfo *devi)
break;
case 0x22: /* Get MAC address */
-#ifdef XE_DEBUG
- printf("xe%d: Got MAC address (0x22)\n", unit);
-#endif
if ((CISTPL_LEN(buf) == 8) &&
(CISTPL_DATA(buf, 0) == 0x04) &&
(CISTPL_DATA(buf, 1) == ETHER_ADDR_LEN)) {
+#if XE_DEBUG > 1
+ printf("xe%d: Got MAC address (0x22)\n", unit);
+#endif
for (i = 0; i < ETHER_ADDR_LEN; scp->arpcom.ac_enaddr[i] = CISTPL_DATA(buf, i+2), i++);
}
success++;
@@ -635,7 +651,7 @@ xe_card_init(struct pccard_devinfo *devi)
/* Check for certain strange CE2's that look like CE's */
if (strcmp(scp->card_type, "CE") == 0) {
u_char *str = ver_str;
-#ifdef XE_DEBUG
+#if XE_DEBUG > 1
printf("xe%d: Checking for weird CE2 string\n", unit);
#endif
str += strlen(str) + 1; /* Skip forward to 3rd version string */
@@ -665,13 +681,17 @@ xe_card_init(struct pccard_devinfo *devi)
scp->autoneg_status = 0;
/* Hack RealPorts into submission */
- if (scp->cem56 && xe_cem56fix(scp) < 0) {
+ if (scp->dingo && xe_cem56fix(scp) < 0) {
printf( "xe%d: Unable to fix your RealPort\n", unit );
sca[unit] = 0;
free(scp, M_DEVBUF);
return ENODEV;
}
+ /* Hopefully safe to read this here */
+ XE_SELECT_PAGE(4);
+ scp->version = XE_INB(XE_BOV);
+
/* Attempt to attach the device */
if (!xe_attach(scp->dev)) {
sca[unit] = 0;
@@ -738,7 +758,7 @@ xe_attach (struct isa_device *dev) {
* operation, but this driver doesn't, yet. Therefore we leave those modes
* out of the list. We support some form of autoselection in all cases.
*/
- if (scp->ce3) {
+ if (scp->mohawk) {
ifmedia_add(scp->ifm, IFM_ETHER|IFM_100_TX, 0, NULL);
ifmedia_add(scp->ifm, IFM_ETHER|IFM_10_T, 0, NULL);
}
@@ -752,12 +772,30 @@ xe_attach (struct isa_device *dev) {
ifmedia_set(scp->ifm, IFM_ETHER|IFM_AUTO);
/* Print some useful information */
- printf("\nxe%d: %s %s%s%s\n",
+ printf("\n");
+ printf("xe%d: %s %s, bonding version %#x%s%s\n",
scp->unit,
scp->vendor,
scp->card_type,
- scp->ce3 ? ", 100Mbps capable" : "",
- scp->cem56 ? ", with modem" : "");
+ scp->version,
+ scp->mohawk ? ", 100Mbps capable" : "",
+ scp->modem ? ", with modem" : "");
+ if (scp->mohawk) {
+ XE_SELECT_PAGE(0x10);
+ printf("xe%d: DingoID = %#x, RevisionID = %#x, VendorID = %#x\n",
+ scp->unit,
+ XE_INW(XE_DINGOID),
+ XE_INW(XE_RevID),
+ XE_INW(XE_VendorID));
+ }
+ if (scp->ce2) {
+ XE_SELECT_PAGE(0x45);
+ printf("xe%d: CE2 version = %#x\n",
+ scp->unit,
+ XE_INB(XE_REV));
+ }
+
+ /* Print MAC address */
printf("xe%d: Ethernet address %02x", scp->unit, scp->arpcom.ac_enaddr[0]);
for (i = 1; i < ETHER_ADDR_LEN; i++) {
printf(":%02x", scp->arpcom.ac_enaddr[i]);
@@ -770,7 +808,7 @@ xe_attach (struct isa_device *dev) {
#if NBPFILTER > 0
/* If BPF is in the kernel, call the attach for it */
-#ifdef XE_DEBUG
+#if XE_DEBUG > 1
printf("xe%d: BPF listener attached\n", scp->unit);
#endif
bpfattach(scp->ifp, DLT_EN10MB, sizeof(struct ether_header));
@@ -801,7 +839,7 @@ xe_init(void *xscp) {
/* Reset transmitter flags */
scp->tx_queued = 0;
- scp->tx_ptr = 0;
+ scp->tx_tpr = 0;
scp->tx_collisions = 0;
scp->ifp->if_timer = 0;
@@ -825,19 +863,19 @@ xe_init(void *xscp) {
/* Fix the data offset register -- reset leaves it off-by-one */
XE_SELECT_PAGE(0);
- XE_OUTW(XE_DOR, 0x2000);
+ XE_OUTW(XE_DO, 0x2000);
/*
* Set MAC interrupt masks and clear status regs. The bit names are direct
* from the Linux code; I have no idea what most of them do.
*/
XE_SELECT_PAGE(0x40); /* Bit 7..0 */
- XE_OUTB(XE_RXM0, 0xff); /* ROK, RAB, rsv, RO, CRC, AE, PTL, MP */
- XE_OUTB(XE_TXM0, 0xff); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
- XE_OUTB(XE_TXM1, 0xb0); /* rsv, rsv, PTD, EXT, rsv, rsv, rsv, rsv */
- XE_OUTB(XE_RXS0, 0x00); /* ROK, RAB, REN, RO, CRC, AE, PTL, MP */
- XE_OUTB(XE_TXS0, 0x00); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
- XE_OUTB(XE_TXS1, 0x00); /* TEN, rsv, PTD, EXT, retry_counter:4 */
+ XE_OUTB(XE_RX0Msk, 0xff); /* ROK, RAB, rsv, RO, CRC, AE, PTL, MP */
+ XE_OUTB(XE_TX0Msk, 0xff); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
+ XE_OUTB(XE_TX0Msk+1, 0xb0); /* rsv, rsv, PTD, EXT, rsv, rsv, rsv, rsv */
+ XE_OUTB(XE_RST0, 0x00); /* ROK, RAB, REN, RO, CRC, AE, PTL, MP */
+ XE_OUTB(XE_TXST0, 0x00); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
+ XE_OUTB(XE_TXST1, 0x00); /* TEN, rsv, PTD, EXT, retry_counter:4 */
/*
* Check for an in-progress autonegotiation. If one is active, just set
@@ -850,7 +888,7 @@ xe_init(void *xscp) {
else {
/* Enable receiver, put MAC online */
XE_SELECT_PAGE(0x40);
- XE_OUTB(XE_OCR, XE_OCR_RX_ENABLE|XE_OCR_ONLINE);
+ XE_OUTB(XE_CMD0, XE_CMD0_RX_ENABLE|XE_CMD0_ONLINE);
/* Set up IMR, enable interrupts */
xe_enable_intr(scp);
@@ -1030,11 +1068,11 @@ xe_card_intr(struct pccard_devinfo *devi) {
if (scp->gone)
return 0;
- if (scp->ce3) {
+ if (scp->mohawk) {
XE_OUTB(XE_CR, 0); /* Disable interrupts */
}
- psr = XE_INB(XE_PSR); /* Stash the current register page */
+ psr = XE_INB(XE_PR); /* Stash the current register page */
/*
* Read ISR to see what caused this interrupt. Note that this clears the
@@ -1045,31 +1083,31 @@ xe_card_intr(struct pccard_devinfo *devi) {
result = 1; /* This device did generate an int */
esr = XE_INB(XE_ESR); /* Read the other status registers */
XE_SELECT_PAGE(0x40);
- rxs = XE_INB(XE_RXS0);
- XE_OUTB(XE_RXS0, ~rxs & 0xff);
- txs = XE_INB(XE_TXS0);
- txs |= XE_INB(XE_TXS1) << 8;
- XE_OUTB(XE_TXS0, 0);
- XE_OUTB(XE_TXS1, 0);
+ rxs = XE_INB(XE_RST0);
+ XE_OUTB(XE_RST0, ~rxs & 0xff);
+ txs = XE_INB(XE_TXST0);
+ txs |= XE_INB(XE_TXST1) << 8;
+ XE_OUTB(XE_TXST0, 0);
+ XE_OUTB(XE_TXST1, 0);
XE_SELECT_PAGE(0);
-#if XE_DEBUG > 3
- printf("xe%d: ISR=%#2.2x ESR=%#2.2x RXS=%#2.2x TXS=%#4.4x\n", unit, isr, esr, rxs, txs);
+#if XE_DEBUG > 2
+ printf("xe%d: ISR=%#2.2x ESR=%#2.2x RST=%#2.2x TXST=%#4.4x\n", unit, isr, esr, rxs, txs);
#endif
/*
* Handle transmit interrupts
*/
if (isr & XE_ISR_TX_PACKET) {
- u_int8_t new_ptr, sent;
+ u_int8_t new_tpr, sent;
- if ((new_ptr = XE_INB(XE_PTR)) < scp->tx_ptr) /* Update packet count */
- sent = (0xff - scp->tx_ptr) + new_ptr; /* PTR rolled over */
+ if ((new_tpr = XE_INB(XE_TPR)) < scp->tx_tpr) /* Update packet count */
+ sent = (0xff - scp->tx_tpr) + new_tpr; /* TPR rolled over */
else
- sent = new_ptr - scp->tx_ptr;
+ sent = new_tpr - scp->tx_tpr;
if (sent > 0) { /* Packets sent since last interrupt */
- scp->tx_ptr = new_ptr;
+ scp->tx_tpr = new_tpr;
scp->tx_queued -= sent;
ifp->if_opackets += sent;
ifp->if_collisions += scp->tx_collisions;
@@ -1126,7 +1164,7 @@ xe_card_intr(struct pccard_devinfo *devi) {
/*
* Handle receive interrupts
*/
- while ((esr = XE_INB(XE_ESR)) & XE_ESR_FULL_PKT_RX) {
+ while ((esr = XE_INB(XE_ESR)) & XE_ESR_FULL_PACKET_RX) {
if ((rsr = XE_INB(XE_RSR)) & XE_RSR_RX_OK) {
struct ether_header *ehp;
@@ -1147,7 +1185,7 @@ xe_card_intr(struct pccard_devinfo *devi) {
if ((rx_bytes += len) > 22000) {
ifp->if_iqdrops++;
scp->mibData.dot3StatsMissedFrames++;
- XE_OUTW(XE_DOR, 0x8000);
+ XE_OUTW(XE_DO, 0x8000);
continue;
}
#endif
@@ -1194,7 +1232,7 @@ xe_card_intr(struct pccard_devinfo *devi) {
u_short rhs;
XE_SELECT_PAGE(5);
- rhs = XE_INW(XE_RHS);
+ rhs = XE_INW(XE_RHSA);
XE_SELECT_PAGE(0);
rhs += 3; /* Skip control info */
@@ -1244,7 +1282,7 @@ xe_card_intr(struct pccard_devinfo *devi) {
*/
if ((ifp->if_flags & IFF_PROMISC) &&
bcmp(ehp->ether_dhost, scp->arpcom.ac_enaddr, sizeof(ehp->ether_dhost)) != 0 &&
- (rsr & XE_RSR_PHYS_PKT)) {
+ (rsr & XE_RSR_PHYS_PACKET)) {
m_freem(mbp);
mbp = NULL;
}
@@ -1257,18 +1295,18 @@ xe_card_intr(struct pccard_devinfo *devi) {
ether_input(ifp, ehp, mbp); /* Send the packet on its way */
ifp->if_ipackets++; /* Success! */
}
- XE_OUTW(XE_DOR, 0x8000); /* skip_rx_packet command */
+ XE_OUTW(XE_DO, 0x8000); /* skip_rx_packet command */
}
}
- else if (rsr & XE_RSR_LONG_PKT) { /* Packet length >1518 bytes */
+ else if (rsr & XE_RSR_LONG_PACKET) { /* Packet length >1518 bytes */
scp->mibdata.dot3StatsFrameTooLongs++;
ifp->if_ierrors++;
}
- else if (rsr & XE_RSR_CRC_ERR) { /* Bad checksum on packet */
+ else if (rsr & XE_RSR_CRC_ERROR) { /* Bad checksum on packet */
scp->mibdata.dot3StatsFCSErrors++;
ifp->if_ierrors++;
}
- else if (rsr & XE_RSR_ALIGN_ERR) { /* Packet alignment error */
+ else if (rsr & XE_RSR_ALIGN_ERROR) { /* Packet alignment error */
scp->mibdata.dot3StatsAlignmentErrors++;
ifp->if_ierrors++;
}
@@ -1283,8 +1321,8 @@ xe_card_intr(struct pccard_devinfo *devi) {
XE_SELECT_PAGE(psr); /* Restore saved page */
XE_OUTB(XE_CR, XE_CR_ENABLE_INTR); /* Re-enable interrupts */
- /* XXX - Could force an int here, instead of dropping packets? */
- /* XXX - XE_OUTB(XE_CR, XE_CR_ENABLE_INTR|XE_CE_FORCE_INTR); */
+ /* Could force an int here, instead of dropping packets? */
+ /* XE_OUTB(XE_CR, XE_CR_ENABLE_INTR|XE_CE_FORCE_INTR); */
return result;
}
@@ -1409,7 +1447,7 @@ static void xe_setmedia(void *xscp) {
switch (scp->autoneg_status) {
case XE_AUTONEG_NONE:
-#ifdef XE_DEBUG
+#if XE_DEBUG > 1
printf("xe%d: Waiting for idle transmitter\n", scp->unit);
#endif
scp->arpcom.ac_if.if_flags |= IFF_OACTIVE;
@@ -1420,7 +1458,7 @@ static void xe_setmedia(void *xscp) {
case XE_AUTONEG_WAITING:
xe_soft_reset(scp);
if (scp->phy_ok) {
-#ifdef XE_DEBUG
+#if XE_DEBUG > 1
printf("xe%d: Starting autonegotiation\n", scp->unit);
#endif
bmcr = xe_phy_readreg(scp, PHY_BMCR);
@@ -1445,7 +1483,7 @@ static void xe_setmedia(void *xscp) {
bmsr = xe_phy_readreg(scp, PHY_BMSR);
lpar = xe_phy_readreg(scp, PHY_LPAR);
if (bmsr & (PHY_BMSR_AUTONEGCOMP|PHY_BMSR_LINKSTAT)) {
-#ifdef XE_DEBUG
+#if XE_DEBUG > 1
printf("xe%d: Autonegotiation complete!\n", scp->unit);
#endif
/*
@@ -1484,7 +1522,7 @@ static void xe_setmedia(void *xscp) {
}
}
else {
-#ifdef XE_DEBUG
+#if XE_DEBUG > 1
printf("xe%d: Autonegotiation failed; trying 100baseTX\n", scp->unit);
#endif
XE_MII_DUMP(scp);
@@ -1505,7 +1543,7 @@ static void xe_setmedia(void *xscp) {
(void)xe_phy_readreg(scp, PHY_BMSR);
bmsr = xe_phy_readreg(scp, PHY_BMSR);
if (bmsr & PHY_BMSR_LINKSTAT) {
-#ifdef XE_DEBUG
+#if XE_DEBUG > 1
printf("xe%d: Got 100baseTX link!\n", scp->unit);
#endif
XE_MII_DUMP(scp);
@@ -1515,7 +1553,7 @@ static void xe_setmedia(void *xscp) {
scp->autoneg_status = XE_AUTONEG_NONE;
}
else {
-#ifdef XE_DEBUG
+#if XE_DEBUG > 1
printf("xe%d: Autonegotiation failed; disabling PHY\n", scp->unit);
#endif
XE_MII_DUMP(scp);
@@ -1535,10 +1573,10 @@ static void xe_setmedia(void *xscp) {
* already by the big switch above.
*/
if (scp->autoneg_status == XE_AUTONEG_FAIL) {
-#ifdef XE_DEBUG
+#if XE_DEBUG > 1
printf("xe%d: Selecting 10baseX\n", scp->unit);
#endif
- if (scp->ce3) {
+ if (scp->mohawk) {
XE_SELECT_PAGE(0x42);
XE_OUTB(XE_SWC1, 0x80);
scp->media = IFM_ETHER|IFM_10_T;
@@ -1565,7 +1603,7 @@ static void xe_setmedia(void *xscp) {
case IFM_100_TX: /* Force 100baseTX */
xe_soft_reset(scp);
if (scp->phy_ok) {
-#ifdef XE_DEBUG
+#if XE_DEBUG > 1
printf("xe%d: Selecting 100baseTX\n", scp->unit);
#endif
XE_SELECT_PAGE(0x42);
@@ -1580,7 +1618,7 @@ static void xe_setmedia(void *xscp) {
case IFM_10_T: /* Force 10baseT */
xe_soft_reset(scp);
-#ifdef XE_DEBUG
+#if XE_DEBUG > 1
printf("xe%d: Selecting 10baseT\n", scp->unit);
#endif
if (scp->phy_ok) {
@@ -1595,7 +1633,7 @@ static void xe_setmedia(void *xscp) {
case IFM_10_2:
xe_soft_reset(scp);
-#ifdef XE_DEBUG
+#if XE_DEBUG > 1
printf("xe%d: Selecting 10base2\n", scp->unit);
#endif
XE_SELECT_PAGE(0x42);
@@ -1609,7 +1647,7 @@ static void xe_setmedia(void *xscp) {
* Finally, the LEDs are set to match whatever media was chosen and the
* transmitter is unblocked.
*/
-#ifdef XE_DEBUG
+#if XE_DEBUG > 1
printf("xe%d: Setting LEDs\n", scp->unit);
#endif
XE_SELECT_PAGE(2);
@@ -1617,7 +1655,7 @@ static void xe_setmedia(void *xscp) {
case IFM_100_TX:
case IFM_10_T:
XE_OUTB(XE_LED, 0x3b);
- if (scp->cem56)
+ if (scp->dingo)
XE_OUTB(0x0b, 0x04); /* 100Mbit LED */
break;
@@ -1654,7 +1692,7 @@ xe_hard_reset(struct xe_softc *scp) {
XE_OUTB(XE_GPR1, 0); /* Power off */
DELAY(40000);
- if (scp->ce3)
+ if (scp->mohawk)
XE_OUTB(XE_GPR1, 1); /* And back on again */
else
XE_OUTB(XE_GPR1, 5); /* Also set AIC bit, whatever that is */
@@ -1693,7 +1731,7 @@ xe_soft_reset(struct xe_softc *scp) {
XE_OUTB(XE_CR, 0);
DELAY(40000);
- if (scp->ce3) {
+ if (scp->mohawk) {
/*
* set GP1 and GP2 as outputs (bits 2 & 3)
* set GP1 low to power on the ML6692 (bit 0)
@@ -1712,7 +1750,7 @@ xe_soft_reset(struct xe_softc *scp) {
* Get silicon revision number.
*/
XE_SELECT_PAGE(4);
- if (scp->ce3)
+ if (scp->mohawk)
scp->srev = (XE_INB(XE_BOV) & 0x70) >> 4;
else
scp->srev = (XE_INB(XE_BOV) & 0x30) >> 4;
@@ -1728,7 +1766,7 @@ xe_soft_reset(struct xe_softc *scp) {
/*
* Check for PHY.
*/
- if (scp->ce3) {
+ if (scp->mohawk) {
scp->phy_ok = xe_mii_init(scp);
}
@@ -1794,7 +1832,7 @@ xe_enable_intr(struct xe_softc *scp) {
XE_SELECT_PAGE(0);
XE_OUTB(XE_CR, XE_CR_ENABLE_INTR); /* Enable interrupts */
- if (scp->modem && !scp->cem56) { /* This bit is just magic */
+ if (scp->modem && !scp->dingo) { /* This bit is just magic */
if (!(XE_INB(0x10) & 0x01)) {
XE_OUTB(0x10, 0x11); /* Unmask master int enable bit */
}
@@ -1813,7 +1851,7 @@ xe_disable_intr(struct xe_softc *scp) {
XE_SELECT_PAGE(0);
XE_OUTB(XE_CR, 0); /* Disable interrupts */
- if (scp->modem && !scp->cem56) { /* More magic (does this work?) */
+ if (scp->modem && !scp->dingo) { /* More magic (does this work?) */
XE_OUTB(0x10, 0x10); /* Mask the master int enable bit */
}
@@ -1855,12 +1893,12 @@ xe_setmulti(struct xe_softc *scp) {
XE_SELECT_PAGE(0x42);
XE_OUTB(XE_SWC1, 0x01);
XE_SELECT_PAGE(0x40);
- XE_OUTB(XE_OCR, XE_OCR_OFFLINE);
+ XE_OUTB(XE_CMD0, XE_CMD0_OFFLINE);
/*xe_reg_dump(scp);*/
xe_setaddrs(scp);
/*xe_reg_dump(scp);*/
XE_SELECT_PAGE(0x40);
- XE_OUTB(XE_OCR, XE_OCR_RX_ENABLE|XE_OCR_ONLINE);
+ XE_OUTB(XE_CMD0, XE_CMD0_RX_ENABLE|XE_CMD0_ONLINE);
}
else {
/*
@@ -1880,8 +1918,6 @@ xe_setmulti(struct xe_softc *scp) {
* XXX - This doesn't work right, but I'm not sure why yet. We seem to be
* XXX - doing much the same as the Linux code, which is weird enough that
* XXX - it's probably right (despite my earlier comments to the contrary).
- * XXX - I wonder if this thing has a multicast hash filter like most other
- * XXX - Ethernet hardware seems to?
*/
static void
xe_setaddrs(struct xe_softc *scp) {
@@ -1907,7 +1943,7 @@ xe_setaddrs(struct xe_softc *scp) {
}
for (i = 0; i < 6; i++, byte++) {
-#if XE_DEBUG > 1
+#if XE_DEBUG > 2
if (i)
printf(":%x", addr[i]);
else
@@ -1920,12 +1956,12 @@ xe_setaddrs(struct xe_softc *scp) {
XE_SELECT_PAGE(page);
}
- if (scp->ce3)
+ if (scp->mohawk)
XE_OUTB(byte, addr[5 - i]);
else
XE_OUTB(byte, addr[i]);
}
-#if XE_DEBUG > 1
+#if XE_DEBUG > 2
printf("\n");
#endif
}
@@ -2001,7 +2037,7 @@ xe_pio_write_packet(struct xe_softc *scp, struct mbuf *mbp) {
* short packets with random cruft. Otherwise, write nonsense words to fill
* out the packet. I guess it is then sent automatically (?)
*/
- if (scp->ce3)
+ if (scp->mohawk)
XE_OUTB(XE_CR, XE_CR_TX_PACKET|XE_CR_ENABLE_INTR);
else
while (pad > 0) {
@@ -2042,6 +2078,60 @@ xe_card_unload(struct pccard_devinfo *devi) {
}
+/*
+ * Compute the 32-bit Ethernet CRC for the given buffer.
+ */
+static u_int32_t
+xe_compute_crc(u_int8_t *data, int len) {
+ u_int32_t crc = 0xffffffff;
+ u_int32_t poly = 0x04c11db6;
+ u_int8_t current, crc31, bit;
+ int i, k;
+
+ for (i = 0; i < len; i++) {
+ current = data[i];
+ for (k = 1; k <= 8; k++) {
+ if (crc & 0x80000000) {
+ crc31 = 0x01;
+ }
+ else {
+ crc31 = 0;
+ }
+ bit = crc31 ^ (current & 0x01);
+ crc <<= 1;
+ current >>= 1;
+ if (bit) {
+ crc = (crc ^ poly)|1;
+ }
+ }
+ }
+ return crc;
+}
+
+
+/*
+ * Convert a CRC into an index into the multicast hash table. What we do is
+ * take the most-significant 6 bits of the CRC, reverse them, and use that as
+ * the bit number in the hash table. Bits 5:3 of the result give the byte
+ * within the table (0-7); bits 2:0 give the bit number within that byte (also
+ * 0-7), ie. the number of shifts needed to get it into the lsb position.
+ */
+static int
+xe_compute_hashbit(u_int32_t crc) {
+ u_int8_t hashbit = 0;
+ int i;
+
+ for (i = 0; i < 6; i++) {
+ hashbit >>= 1;
+ if (crc & 0x80000000) {
+ hashbit &= 0x80;
+ }
+ crc <<= 1;
+ }
+ return (hashbit >> 2);
+}
+
+
/**************************************************************
* *
@@ -2052,6 +2142,9 @@ xe_card_unload(struct pccard_devinfo *devi) {
/*
* Alternative MII/PHY handling code adapted from the xl driver. It doesn't
* seem to work any better than the xirc2_ps stuff, but it's cleaner code.
+ * XXX - this stuff shouldn't be here. It should all be abstracted off to
+ * XXX - some kind of common MII-handling code, shared by all drivers. But
+ * XXX - that's a whole other mission.
*/
#define XE_MII_SET(x) XE_OUTB(XE_GPR2, (XE_INB(XE_GPR2) | 0x04) | (x))
#define XE_MII_CLR(x) XE_OUTB(XE_GPR2, (XE_INB(XE_GPR2) | 0x04) & ~(x))
@@ -2085,13 +2178,13 @@ xe_mii_init(struct xe_softc *scp) {
status = xe_phy_readreg(scp, PHY_BMSR);
if ((status & 0xff00) != 0x7800) {
-#ifdef XE_DEBUG
+#if XE_DEBUG > 1
printf("xe%d: no PHY found, %0x\n", scp->unit, status);
#endif
return 0;
}
else {
-#ifdef XE_DEBUG
+#if XE_DEBUG > 1
printf("xe%d: PHY OK!\n", scp->unit);
#endif
diff --git a/sys/dev/xe/if_xereg.h b/sys/dev/xe/if_xereg.h
index 060db2ca..a4ecb35 100644
--- a/sys/dev/xe/if_xereg.h
+++ b/sys/dev/xe/if_xereg.h
@@ -24,6 +24,7 @@
* SUCH DAMAGE.
*
* $Id: if_xereg.h,v 1.5 1999/05/20 21:53:58 scott Exp $
+ * $FreeBSD$
*/
/*
OpenPOWER on IntegriCloud