MFp4 //depot/projects/usb@159909

- make usb2_power_mask_t 16-bit
- remove "usb2_config_sub" structure from "usb2_config". To compensate for this
  "usb2_config" has a new field called "usb_mode" which select for which mode
  the current xfer entry is active. Options are: a) Device mode only b) Host
  mode only (default-by-zero) c) Both modes.  This change was scripted using
  the following sed script: "s/\.mh\././g".
- the standard packet size table in "usb_transfer.c" is now a function, hence
  the code for the function uses less memory than the table itself.

Submitted by:	Hans Petter Selasky

1 files changed, 6 insertions, 6 deletions

diff --git a/sys/dev/usb/serial/ugensa.c b/sys/dev/usb/serial/ugensa.c
index 6174f17..f370e1b 100644
--- a/sys/dev/usb/serial/ugensa.c
+++ b/sys/dev/usb/serial/ugensa.c
@@ -106,18 +106,18 @@ static const struct usb2_config
 		.type = UE_BULK,
 		.endpoint = UE_ADDR_ANY,
 		.direction = UE_DIR_OUT,
-		.mh.bufsize = UGENSA_BUF_SIZE,
-		.mh.flags = {.pipe_bof = 1,.force_short_xfer = 1,},
-		.mh.callback = &ugensa_bulk_write_callback,
+		.bufsize = UGENSA_BUF_SIZE,
+		.flags = {.pipe_bof = 1,.force_short_xfer = 1,},
+		.callback = &ugensa_bulk_write_callback,
 	},
 
 	[UGENSA_BULK_DT_RD] = {
 		.type = UE_BULK,
 		.endpoint = UE_ADDR_ANY,
 		.direction = UE_DIR_IN,
-		.mh.bufsize = UGENSA_BUF_SIZE,
-		.mh.flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
-		.mh.callback = &ugensa_bulk_read_callback,
+		.bufsize = UGENSA_BUF_SIZE,
+		.flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
+		.callback = &ugensa_bulk_read_callback,
 	},
 };