Fix low-level uart drivers that set their fifo sizes in the softc too late.

uart(4) allocates send and receiver buffers in attach() before it calls
the low-level driver's attach routine.  Many low-level drivers set the
fifo sizes in their attach routine, which is too late.  Other drivers set
them in the probe() routine, so that they're available when uart(4)
allocates buffers.  This fixes the ones that were setting the values too
late by moving the code to probe().

5 files changed, 15 insertions, 15 deletions

diff --git a/sys/dev/uart/uart_dev_imx.c b/sys/dev/uart/uart_dev_imx.c
index 81fe163..1651a9f 100644
--- a/sys/dev/uart/uart_dev_imx.c
+++ b/sys/dev/uart/uart_dev_imx.c
@@ -187,9 +187,6 @@ imx_uart_bus_attach(struct uart_softc *sc)
 		imx_uart_init(bas, 115200, 8, 1, 0);
 	}
 
-	sc->sc_rxfifosz = 1;
-	sc->sc_txfifosz = 1;
-
 	(void)imx_uart_bus_getsig(sc);
 
 	/* XXX workaround to have working console on manut prompt */
@@ -353,6 +350,9 @@ imx_uart_bus_probe(struct uart_softc *sc)
 	if (error)
 		return (error);
 
+	sc->sc_rxfifosz = 1;
+	sc->sc_txfifosz = 1;
+
 	device_set_desc(sc->sc_dev, "imx_uart");
 	return (0);
 }
diff --git a/sys/dev/uart/uart_dev_pl011.c b/sys/dev/uart/uart_dev_pl011.c
index d71ab11..583dedf 100644
--- a/sys/dev/uart/uart_dev_pl011.c
+++ b/sys/dev/uart/uart_dev_pl011.c
@@ -278,9 +278,6 @@ uart_pl011_bus_attach(struct uart_softc *sc)
 	/* Clear RX & TX interrupts */
 	__uart_setreg(bas, UART_ICR, IMSC_MASK_ALL);
 
-	sc->sc_rxfifosz = 1;
-	sc->sc_txfifosz = 1;
-
 	return (0);
 }
 
@@ -377,6 +374,9 @@ uart_pl011_bus_probe(struct uart_softc *sc)
 
 	device_set_desc(sc->sc_dev, "PrimeCell UART (PL011)");
 
+	sc->sc_rxfifosz = 1;
+	sc->sc_txfifosz = 1;
+
 	return (0);
 }
 
diff --git a/sys/dev/uart/uart_dev_quicc.c b/sys/dev/uart/uart_dev_quicc.c
index df327a8..337591e 100644
--- a/sys/dev/uart/uart_dev_quicc.c
+++ b/sys/dev/uart/uart_dev_quicc.c
@@ -293,9 +293,6 @@ quicc_bus_attach(struct uart_softc *sc)
 		quicc_setup(bas, 9600, 8, 1, UART_PARITY_NONE);
 	}
 
-	sc->sc_rxfifosz = 1;
-	sc->sc_txfifosz = 1;
-
 	/* Enable interrupts on the receive buffer. */
 	rb = quicc_read2(bas, QUICC_PRAM_SCC_RBASE(bas->chan - 1));
 	st = quicc_read2(bas, rb);
@@ -417,6 +414,9 @@ quicc_bus_probe(struct uart_softc *sc)
 	if (error)
 		return (error);
 
+	sc->sc_rxfifosz = 1;
+	sc->sc_txfifosz = 1;
+
 	snprintf(buf, sizeof(buf), "quicc, channel %d", sc->sc_bas.chan);
 	device_set_desc_copy(sc->sc_dev, buf);
 	return (0);
diff --git a/sys/dev/uart/uart_dev_sab82532.c b/sys/dev/uart/uart_dev_sab82532.c
index 11cdb4b..e2ec227 100644
--- a/sys/dev/uart/uart_dev_sab82532.c
+++ b/sys/dev/uart/uart_dev_sab82532.c
@@ -407,9 +407,6 @@ sab82532_bus_attach(struct uart_softc *sc)
 	if (sc->sc_sysdev == NULL)
 		sab82532_init(bas, 9600, 8, 1, UART_PARITY_NONE);
 
-	sc->sc_rxfifosz = 32;
-	sc->sc_txfifosz = 32;
-
 	imr0 = SAB_IMR0_TCD|SAB_IMR0_TIME|SAB_IMR0_CDSC|SAB_IMR0_RFO|
 	    SAB_IMR0_RPF;
 	uart_setreg(bas, SAB_IMR0, 0xff & ~imr0);
@@ -592,6 +589,9 @@ sab82532_bus_probe(struct uart_softc *sc)
 	if (error)
 		return (error);
 
+	sc->sc_rxfifosz = 32;
+	sc->sc_txfifosz = 32;
+
 	ch = sc->sc_bas.chan - 1 + 'A';
 
 	switch (uart_getreg(&sc->sc_bas, SAB_VSTR) & SAB_VSTR_VMASK) {
diff --git a/sys/dev/uart/uart_dev_z8530.c b/sys/dev/uart/uart_dev_z8530.c
index 33bacdc..f948b26 100644
--- a/sys/dev/uart/uart_dev_z8530.c
+++ b/sys/dev/uart/uart_dev_z8530.c
@@ -332,9 +332,6 @@ z8530_bus_attach(struct uart_softc *sc)
 	}
 	z8530->txidle = 1;	/* Report SER_INT_TXIDLE. */
 
-	sc->sc_rxfifosz = 3;
-	sc->sc_txfifosz = 1;
-
 	(void)z8530_bus_getsig(sc);
 
 	uart_setmreg(bas, WR_IC, IC_BRK | IC_CTS | IC_DCD);
@@ -515,6 +512,9 @@ z8530_bus_probe(struct uart_softc *sc)
 	if (error)
 		return (error);
 
+	sc->sc_rxfifosz = 3;
+	sc->sc_txfifosz = 1;
+
 	ch = sc->sc_bas.chan - 1 + 'A';
 
 	snprintf(buf, sizeof(buf), "z8530, channel %c", ch);