Ported to OpenBSD. sys/pci/smc83c170.h renamed to sys/pci/if_txvar.h to be

like others.

1 files changed, 406 insertions, 0 deletions

diff --git a/sys/dev/tx/if_txvar.h b/sys/dev/tx/if_txvar.h
new file mode 100644
index 0000000..efa282c
--- /dev/null
+++ b/sys/dev/tx/if_txvar.h
@@ -0,0 +1,406 @@
+/*	$OpenBSD: if_txvar.h,v 1.3 1998/10/10 04:30:09 jason Exp $	*/
+/*      $Id: if_txvar.h,v 1.3 1998/10/10 04:30:09 jason Exp $ */
+
+/*-
+ * Copyright (c) 1997 Semen Ustimenko
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *
+ */
+
+/*
+ * Configuration
+ */
+#ifndef ETHER_MAX_LEN
+#define ETHER_MAX_LEN		1518
+#endif
+#ifndef ETHER_MIN_LEN
+#define ETHER_MIN_LEN		64
+#endif
+#ifndef ETHER_CRC_LEN
+#define ETHER_CRC_LEN		4
+#endif
+#define TX_RING_SIZE		16		/* Leave this a power of 2 */
+#define RX_RING_SIZE		16		/* And this too, to do not */
+						/* confuse RX(TX)_RING_MASK */
+#define TX_RING_MASK		(TX_RING_SIZE - 1)
+#define RX_RING_MASK		(RX_RING_SIZE - 1)
+#define EPIC_FULL_DUPLEX	1
+#define EPIC_HALF_DUPLEX	0
+#define ETHER_MAX_FRAME_LEN	(ETHER_MAX_LEN + ETHER_CRC_LEN)
+#define	EPIC_LINK_DOWN		0x00000001
+
+/* PCI identification */
+#define SMC_VENDORID		0x10B8
+#define CHIPID_83C170		0x0005
+#define	PCI_VENDORID(x)		((x) & 0xFFFF)
+#define	PCI_CHIPID(x)		(((x) >> 16) & 0xFFFF)
+
+/* PCI configuration */
+#define	PCI_CFID	0x00	/* Configuration ID */
+#define	PCI_CFCS	0x04	/* Configurtion Command/Status */
+#define	PCI_CFRV	0x08	/* Configuration Revision */
+#define	PCI_CFLT	0x0c	/* Configuration Latency Timer */
+#define	PCI_CBIO	0x10	/* Configuration Base IO Address */
+#define	PCI_CBMA	0x14	/* Configuration Base Memory Address */
+#define	PCI_CFIT	0x3c	/* Configuration Interrupt */
+#define	PCI_CFDA	0x40	/* Configuration Driver Area */
+
+#define	PCI_CONF_WRITE(r, v)	pci_conf_write(config_id, (r), (v))
+#define	PCI_CONF_READ(r)	pci_conf_read(config_id, (r))
+
+/* EPIC's registers */
+#define	COMMAND		0x0000
+#define	INTSTAT		0x0004		/* Interrupt status. See below */
+#define	INTMASK		0x0008		/* Interrupt mask. See below */
+#define	GENCTL		0x000C
+#define	NVCTL		0x0010
+#define	EECTL		0x0014		/* EEPROM control **/
+#define	TEST1		0x001C		/* XXXXX */
+#define	CRCCNT		0x0020		/* CRC error counter */
+#define	ALICNT		0x0024		/* FrameTooLang error counter */
+#define	MPCNT		0x0028		/* MissedFrames error counters */
+#define	MIICTL		0x0030
+#define	MIIDATA		0x0034
+#define	MIICFG		0x0038
+#define IPG		0x003C
+#define	LAN0		0x0040		/* MAC address */
+#define	LAN1		0x0044		/* MAC address */
+#define	LAN2		0x0048		/* MAC address */
+#define	ID_CHK		0x004C
+#define	MC0		0x0050		/* Multicast filter table */
+#define	MC1		0x0054		/* Multicast filter table */
+#define	MC2		0x0058		/* Multicast filter table */
+#define	MC3		0x005C		/* Multicast filter table */
+#define	RXCON		0x0060		/* Rx control register */
+#define	TXCON		0x0070		/* Tx control register */
+#define	TXSTAT		0x0074
+#define	PRCDAR		0x0084		/* RxRing bus address */
+#define	PRSTAT		0x00A4
+#define	PRCPTHR		0x00B0
+#define	PTCDAR		0x00C4		/* TxRing bus address */
+#define	ETXTHR		0x00DC
+
+#define	COMMAND_STOP_RX		0x01
+#define	COMMAND_START_RX	0x02
+#define	COMMAND_TXQUEUED	0x04
+#define	COMMAND_RXQUEUED	0x08
+#define	COMMAND_NEXTFRAME	0x10
+#define	COMMAND_STOP_TDMA	0x20
+#define	COMMAND_STOP_RDMA	0x40
+#define	COMMAND_TXUGO		0x80
+
+/* Tx threshold */
+#define TX_FIFO_THRESH	0x80		/* 0x40 or 0x10 */
+
+/* Interrupt register bits */
+#define INTSTAT_RCC	0x00000001
+#define INTSTAT_HCC	0x00000002
+#define INTSTAT_RQE	0x00000004
+#define INTSTAT_OVW	0x00000008	
+#define INTSTAT_RXE	0x00000010	
+#define INTSTAT_TXC	0x00000020
+#define INTSTAT_TCC	0x00000040	
+#define INTSTAT_TQE	0x00000080	
+#define INTSTAT_TXU	0x00000100
+#define INTSTAT_CNT	0x00000200
+#define INTSTAT_PREI	0x00000400
+#define INTSTAT_RCT	0x00000800	
+#define INTSTAT_FATAL	0x00001000	/* One of DPE,APE,PMA,PTA happend */	
+#define INTSTAT_UNUSED1	0x00002000
+#define INTSTAT_UNUSED2	0x00004000	
+#define INTSTAT_GP2	0x00008000	/* PHY Event */	
+#define INTSTAT_INT_ACTV 0x00010000
+#define INTSTAT_RXIDLE	0x00020000
+#define INTSTAT_TXIDLE	0x00040000
+#define INTSTAT_RCIP	0x00080000	
+#define INTSTAT_TCIP	0x00100000	
+#define INTSTAT_RBE	0x00200000
+#define INTSTAT_RCTS	0x00400000	
+#define	INTSTAT_RSV	0x00800000
+#define	INTSTAT_DPE	0x01000000	/* PCI Fatal error */
+#define	INTSTAT_APE	0x02000000	/* PCI Fatal error */
+#define	INTSTAT_PMA	0x04000000	/* PCI Fatal error */
+#define	INTSTAT_PTA	0x08000000	/* PCI Fatal error */
+
+#define	GENCTL_SOFT_RESET		0x00000001
+#define	GENCTL_ENABLE_INTERRUPT		0x00000002
+#define	GENCTL_SOFTWARE_INTERRUPT	0x00000004
+#define	GENCTL_POWER_DOWN		0x00000008
+#define	GENCTL_ONECOPY			0x00000010
+#define	GENCTL_BIG_ENDIAN		0x00000020
+#define	GENCTL_RECEIVE_DMA_PRIORITY	0x00000040
+#define	GENCTL_TRANSMIT_DMA_PRIORITY	0x00000080
+#define	GENCTL_RECEIVE_FIFO_THRESHOLD128	0x00000300
+#define	GENCTL_RECEIVE_FIFO_THRESHOLD96	0x00000200
+#define	GENCTL_RECEIVE_FIFO_THRESHOLD64	0x00000100
+#define	GENCTL_RECEIVE_FIFO_THRESHOLD32	0x00000000
+#define	GENCTL_MEMORY_READ_LINE		0x00000400
+#define	GENCTL_MEMORY_READ_MULTIPLE	0x00000800
+#define	GENCTL_SOFTWARE1		0x00001000
+#define	GENCTL_SOFTWARE2		0x00002000
+#define	GENCTL_RESET_PHY		0x00004000
+
+#define	NVCTL_ENABLE_MEMORY_MAP		0x00000001
+#define	NVCTL_CLOCK_RUN_SUPPORTED	0x00000002
+#define	NVCTL_GP1_OUTPUT_ENABLE		0x00000004
+#define	NVCTL_GP2_OUTPUT_ENABLE		0x00000008
+#define	NVCTL_GP1			0x00000010
+#define	NVCTL_GP2			0x00000020
+#define	NVCTL_CARDBUS_MODE		0x00000040
+#define	NVCTL_IPG_DELAY_MASK(x)		((x&0xF)<<7)
+
+#define	RXCON_SAVE_ERRORED_PACKETS	0x00000001
+#define	RXCON_RECEIVE_RUNT_FRAMES	0x00000002
+#define	RXCON_RECEIVE_BROADCAST_FRAMES	0x00000004
+#define	RXCON_RECEIVE_MULTICAST_FRAMES	0x00000008
+#define	RXCON_RECEIVE_INVERSE_INDIVIDUAL_ADDRESS_FRAMES	0x00000010
+#define	RXCON_PROMISCUOUS_MODE		0x00000020
+#define	RXCON_MONITOR_MODE		0x00000040
+#define	RXCON_EARLY_RECEIVE_ENABLE	0x00000080
+#define	RXCON_EXTERNAL_BUFFER_DISABLE	0x00000000
+#define	RXCON_EXTERNAL_BUFFER_16K	0x00000100
+#define	RXCON_EXTERNAL_BUFFER_32K	0x00000200
+#define	RXCON_EXTERNAL_BUFFER_128K	0x00000300
+
+#define TXCON_EARLY_TRANSMIT_ENABLE	0x00000001
+#define TXCON_LOOPBACK_DISABLE		0x00000000
+#define TXCON_LOOPBACK_MODE_INT		0x00000002
+#define TXCON_LOOPBACK_MODE_PHY		0x00000004
+#define TXCON_LOOPBACK_MODE		0x00000006
+#define TXCON_FULL_DUPLEX		0x00000006
+#define TXCON_SLOT_TIME			0x00000078
+
+#define TXCON_DEFAULT		(TXCON_SLOT_TIME | TXCON_EARLY_TRANSMIT_ENABLE)
+#define TRANSMIT_THRESHOLD	0x80
+
+#if defined(EARLY_RX)
+ #define RXCON_DEFAULT		(RXCON_EARLY_RECEIVE_ENABLE | RXCON_SAVE_ERRORED_PACKETS)
+#else
+ #define RXCON_DEFAULT		(0)
+#endif
+/*
+ * National Semiconductor's DP83840A Registers and bits
+ */
+#define	DP83840_OUI	0x080017
+#define DP83840_BMCR	0x00	/* Control register */
+#define DP83840_BMSR	0x01	/* Status rgister */
+#define	DP83840_ANAR	0x04	/* Autonegotiation advertising register */
+#define	DP83840_LPAR	0x05	/* Link Partner Ability register */
+#define DP83840_ANER	0x06	/* Auto-Negotiation Expansion Register */
+#define DP83840_PAR	0x19	/* PHY Address Register */
+#define	DP83840_PHYIDR1	0x02
+#define	DP83840_PHYIDR2	0x03
+
+#define BMCR_RESET		0x8000
+#define BMCR_100MBPS		0x2000	/* 10/100 Mbps */
+#define BMCR_AUTONEGOTIATION	0x1000	/* ON/OFF */
+#define BMCR_RESTART_AUTONEG	0x0200
+#define	BMCR_FULL_DUPLEX	0x0100
+
+#define	BMSR_100BASE_T4		0x8000
+#define	BMSR_100BASE_TX_FD	0x4000
+#define	BMSR_100BASE_TX		0x2000
+#define	BMSR_10BASE_T_FD	0x1000
+#define	BMSR_10BASE_T		0x0800
+#define	BMSR_AUTONEG_COMPLETE	0x0020
+#define BMSR_AUTONEG_ABLE	0x0008
+#define	BMSR_LINK_STATUS	0x0004
+
+#define PAR_FULL_DUPLEX		0x0400
+
+#define ANER_MULTIPLE_LINK_FAULT	0x10
+
+/* ANAR and LPAR have the same bits, define them only once */
+#define	ANAR_10			0x0020
+#define	ANAR_10_FD		0x0040
+#define	ANAR_100_TX		0x0080
+#define	ANAR_100_TX_FD		0x0100
+#define	ANAR_100_T4		0x0200
+
+/*
+ * Quality Semiconductor's QS6612 registers and bits
+ */
+#define	QS6612_OUI		0x006051
+#define	QS6612_MCTL		17
+#define	QS6612_INTSTAT		29
+#define	QS6612_INTMASK		30
+
+#define	MCTL_T4_PRESENT		0x1000	/* External T4 Enabled, ignored */
+					/* if AutoNeg is enabled */
+#define	MCTL_BTEXT		0x0800	/* Reduces 10baset squelch level */
+					/* for extended cable length */
+
+#define	INTSTAT_AN_COMPLETE	0x40	/* Autonegotiation complete */
+#define	INTSTAT_RF_DETECTED	0x20	/* Remote Fault detected */
+#define	INTSTAT_LINK_STATUS	0x10	/* Link status changed */
+#define	INTSTAT_AN_LP_ACK	0x08	/* Autoneg. LP Acknoledge */
+#define	INTSTAT_PD_FAULT	0x04	/* Parallel Detection Fault */
+#define	INTSTAT_AN_PAGE		0x04	/* Autoneg. Page Received */
+#define	INTSTAT_RE_CNT_FULL	0x01	/* Receive Error Counter Full */
+
+#define	INTMASK_THUNDERLAN	0x8000	/* Enable interrupts */
+
+/*
+ * Structures definition and Functions prototypes
+ */
+
+/* EPIC's hardware descriptors, must be aligned on dword in memory */
+/* NB: to make driver happy, this two structures MUST have thier sizes */
+/* be divisor of PAGE_SIZE */
+struct epic_tx_desc {
+	volatile u_int16_t	status;
+	volatile u_int16_t	txlength;
+	volatile u_int32_t	bufaddr;
+	volatile u_int16_t	buflength;
+	volatile u_int16_t	control;
+	volatile u_int32_t	next;
+};
+struct epic_rx_desc {
+	volatile u_int16_t	status;
+	volatile u_int16_t	rxlength;
+	volatile u_int32_t	bufaddr;
+	volatile u_int32_t	buflength;
+	volatile u_int32_t	next;
+};
+
+/* This structure defines EPIC's fragment list, maximum number of frags */
+/* is 63. Let use maximum, becouse size of struct MUST be divisor of */
+/* PAGE_SIZE, and sometimes come mbufs with more then 30 frags */
+#define EPIC_MAX_FRAGS 63
+struct epic_frag_list {
+	volatile u_int32_t		numfrags;
+	struct {
+		volatile u_int32_t	fragaddr;
+		volatile u_int32_t	fraglen;
+	} frag[EPIC_MAX_FRAGS]; 
+	volatile u_int32_t		pad;		/* align on 256 bytes */
+};
+
+/* This is driver's structure to define EPIC descriptors */
+struct epic_rx_buffer {
+	struct mbuf *		mbuf;		/* mbuf receiving packet */
+};
+
+struct epic_tx_buffer {
+	struct mbuf *		mbuf;		/* mbuf contained packet */
+};
+
+/*
+ * NB: ALIGN OF ABOVE STRUCTURES
+ * epic_rx_desc, epic_tx_desc, epic_frag_list - must be aligned on dword
+ */
+
+/* Driver status structure */
+typedef struct {
+#if defined(__OpenBSD__)
+	struct device		sc_dev;
+	void			*sc_ih;
+	bus_space_tag_t		sc_st;
+	bus_space_handle_t	sc_sh;
+#else /* __FreeBSD__ */
+#if defined(EPIC_USEIOSPACE)
+	u_int32_t		iobase;
+#else
+	caddr_t			csr;
+#endif
+#endif
+#if !defined(EPIC_NOIFMEDIA)
+	struct ifmedia 		ifmedia;
+#endif
+	struct arpcom		arpcom;
+	u_int32_t		unit;
+	struct epic_rx_buffer	rx_buffer[RX_RING_SIZE];
+	struct epic_tx_buffer	tx_buffer[TX_RING_SIZE];
+
+	/* Each element of array MUST be aligned on dword  */
+	/* and bounded on PAGE_SIZE 			   */
+	struct epic_rx_desc	*rx_desc;
+	struct epic_tx_desc	*tx_desc;
+	struct epic_frag_list	*tx_flist;
+	u_int32_t		flags;
+	u_int32_t		tx_threshold;
+	u_int32_t		txcon;
+	u_int32_t		phyid;
+	u_int32_t		cur_tx;
+	u_int32_t		cur_rx;
+	u_int32_t		dirty_tx;
+	u_int32_t		pending_txs;
+	void 			*pool;
+} epic_softc_t;
+
+#if defined(__FreeBSD__)
+#define EPIC_FORMAT	"tx%d"
+#define EPIC_ARGS(sc)	(sc->unit)
+#define sc_if arpcom.ac_if
+#define sc_macaddr arpcom.ac_enaddr
+#if defined(EPIC_USEIOSPACE)
+#define CSR_WRITE_4(sc,reg,val) 					\
+	outl( (sc)->iobase + (u_int32_t)(reg), (val) )
+#define CSR_WRITE_2(sc,reg,val) 					\
+	outw( (sc)->iobase + (u_int32_t)(reg), (val) )
+#define CSR_WRITE_1(sc,reg,val) 					\
+	outb( (sc)->iobase + (u_int32_t)(reg), (val) )
+#define CSR_READ_4(sc,reg) 						\
+	inl( (sc)->iobase + (u_int32_t)(reg) )
+#define CSR_READ_2(sc,reg) 						\
+	inw( (sc)->iobase + (u_int32_t)(reg) )
+#define CSR_READ_1(sc,reg) 						\
+	inb( (sc)->iobase + (u_int32_t)(reg) )
+#else
+#define CSR_WRITE_1(sc,reg,val) 					\
+	((*(u_int8_t*)((sc)->csr + (u_int32_t)(reg))) = (u_int8_t)(val))
+#define CSR_WRITE_2(sc,reg,val) 					\
+	((*(u_int16_t*)((sc)->csr + (u_int32_t)(reg))) = (u_int16_t)(val))
+#define CSR_WRITE_4(sc,reg,val) 					\
+	((*(u_int32_t*)((sc)->csr + (u_int32_t)(reg))) = (u_int32_t)(val))
+#define CSR_READ_1(sc,reg) 						\
+	(*(u_int8_t*)((sc)->csr + (u_int32_t)(reg)))
+#define CSR_READ_2(sc,reg) 						\
+	(*(u_int16_t*)((sc)->csr + (u_int32_t)(reg)))
+#define CSR_READ_4(sc,reg) 						\
+	(*(u_int32_t*)((sc)->csr + (u_int32_t)(reg)))
+#endif
+#else /* __OpenBSD__ */
+#define EPIC_FORMAT	"%s"
+#define EPIC_ARGS(sc)	(sc->sc_dev.dv_xname)
+#define sc_if	arpcom.ac_if
+#define sc_macaddr arpcom.ac_enaddr
+#define CSR_WRITE_4(sc,reg,val) 					\
+	bus_space_write_4( (sc)->sc_st, (sc)->sc_sh, (reg), (val) )
+#define CSR_WRITE_2(sc,reg,val) 					\
+	bus_space_write_2( (sc)->sc_st, (sc)->sc_sh, (reg), (val) )
+#define CSR_WRITE_1(sc,reg,val) 					\
+	bus_space_write_1( (sc)->sc_st, (sc)->sc_sh, (reg), (val) )
+#define CSR_READ_4(sc,reg) 						\
+	bus_space_read_4( (sc)->sc_st, (sc)->sc_sh, (reg) )
+#define CSR_READ_2(sc,reg) 						\
+	bus_space_read_2( (sc)->sc_st, (sc)->sc_sh, (reg) )
+#define CSR_READ_1(sc,reg) 						\
+	bus_space_read_1( (sc)->sc_st, (sc)->sc_sh, (reg) )
+#endif
+
+#define	PHY_READ_2(sc,reg)	epic_read_phy_register(sc,reg)
+#define PHY_WRITE_2(sc,reg,val)	epic_write_phy_register(sc,reg,val)
+