diff options
author | imp <imp@FreeBSD.org> | 2008-12-11 06:27:18 +0000 |
---|---|---|
committer | imp <imp@FreeBSD.org> | 2008-12-11 06:27:18 +0000 |
commit | e6342fe8be30cb35eeaf40fa8ddb01e1afa2b8f6 (patch) | |
tree | 79a14abb4c843df22f3c08b85a2a403f45dc9089 /sys/dev/pccbb | |
parent | 0d95748a8b7a6640e76e998a81187e8953d310e4 (diff) | |
download | FreeBSD-src-e6342fe8be30cb35eeaf40fa8ddb01e1afa2b8f6.zip FreeBSD-src-e6342fe8be30cb35eeaf40fa8ddb01e1afa2b8f6.tar.gz |
Update to the interrupt handling code:
o Try to be smarter about reading the ExCA CSC register. Now, we only
do it for 16-bit cards. Add some experimental code to treat it like
a power interrupt, but I'm not 100% sure that I like it. It may be
removed upon further testing. It seemed to help in one test case, but
the evidence may be inconclusive. This may be beneficial for cleaning up
exca_reset and exca_wait_ready.
o Check for CSTS events on the socket event register. We ask for it when
we're powering up a card, but I don't think we're otherwise using
it. Just ACK the interrupt for now. In theory, we can use it
instead of the busy wait we do in cbb_cardbus_reset. More research
is necessary to see if we can optimize things there when we're
waiting for the DEVVENDOR register to become valid.
o Rework the comments a bit. Minor tidying up. Etc.
Diffstat (limited to 'sys/dev/pccbb')
-rw-r--r-- | sys/dev/pccbb/pccbb_pci.c | 93 |
1 files changed, 58 insertions, 35 deletions
diff --git a/sys/dev/pccbb/pccbb_pci.c b/sys/dev/pccbb/pccbb_pci.c index 8c64ef7..86e52b2 100644 --- a/sys/dev/pccbb/pccbb_pci.c +++ b/sys/dev/pccbb/pccbb_pci.c @@ -682,40 +682,67 @@ cbb_pci_shutdown(device_t brdev) return (0); } -#define DELTA (CBB_SOCKET_MASK_CD) static int cbb_pci_filt(void *arg) { struct cbb_softc *sc = arg; uint32_t sockevent; + uint8_t csc; int retval = FILTER_STRAY; /* - * Read the socket event. Sometimes, the theory goes, the PCI - * bus is so loaded that it cannot satisfy the read request, so - * we get garbage back from the following read. We have to filter - * out the garbage so that we don't spontaneously reset the card - * under high load. PCI isn't supposed to act like this. No doubt - * this is a bug in the PCI bridge chipset (or cbb brige) that's being - * used in certain amd64 laptops today. Work around the issue by - * assuming that any bits we don't know about being set means that - * we got garbage. + * Some chips also require us to read the old ExCA registe for card + * status change when we route CSC vis PCI. This isn't supposed to be + * required, but it clears the interrupt state on some chipsets. + * Maybe there's a setting that would obviate its need. Maybe we + * should test the status bits and deal with them, but so far we've + * not found any machines that don't also give us the socket status + * indication above. + * + * This call used to be unconditional. However, further research + * suggests that we hit this condition when the card READY interrupt + * fired. So now we only read it for 16-bit cards, and we only claim + * the interrupt if READY is set. If this still causes problems, then + * the next step would be to read this if we have a 16-bit card *OR* + * we have no card. We treat the READY signal as if it were the power + * completion signal. Some bridges may double signal things here, bit + * signalling twice should be OK since we only sleep on the powerintr + * in one place and a double wakeup would be benign there. + */ + if (sc->flags & CBB_16BIT_CARD) { + csc = exca_getb(&sc->exca[0], EXCA_CSC); + if (csc & EXCA_CSC_READY) { + atomic_add_int(&sc->powerintr, 1); + wakeup((void *)&sc->powerintr); + retval = FILTER_HANDLED; + } + } + + /* + * Read the socket event. Sometimes, the theory goes, the PCI bus is + * so loaded that it cannot satisfy the read request, so we get + * garbage back from the following read. We have to filter out the + * garbage so that we don't spontaneously reset the card under high + * load. PCI isn't supposed to act like this. No doubt this is a bug + * in the PCI bridge chipset (or cbb brige) that's being used in + * certain amd64 laptops today. Work around the issue by assuming + * that any bits we don't know about being set means that we got + * garbage. */ sockevent = cbb_get(sc, CBB_SOCKET_EVENT); if (sockevent != 0 && (sockevent & ~CBB_SOCKET_EVENT_VALID_MASK) == 0) { /* - * If anything has happened to the socket, we assume that - * the card is no longer OK, and we shouldn't call its - * ISR. We set cardok as soon as we've attached the - * card. This helps in a noisy eject, which happens - * all too often when users are ejecting their PC Cards. + * If anything has happened to the socket, we assume that the + * card is no longer OK, and we shouldn't call its ISR. We + * set cardok as soon as we've attached the card. This helps + * in a noisy eject, which happens all too often when users + * are ejecting their PC Cards. * - * We use this method in preference to checking to see if - * the card is still there because the check suffers from - * a race condition in the bouncing case. Prior versions - * of the pccard software used a similar trick and achieved - * excellent results. + * We use this method in preference to checking to see if the + * card is still there because the check suffers from a race + * condition in the bouncing case. */ +#define DELTA (CBB_SOCKET_MASK_CD) if (sockevent & DELTA) { cbb_clrb(sc, CBB_SOCKET_MASK, DELTA); cbb_set(sc, CBB_SOCKET_EVENT, DELTA); @@ -723,9 +750,11 @@ cbb_pci_filt(void *arg) cbb_disable_func_intr(sc); wakeup(&sc->intrhand); } +#undef DELTA + /* - * If we get a power interrupt, wakeup anybody that might - * be waiting for one. + * Wakeup anybody waiting for a power interrupt. We have to + * use atomic_add_int for wakups on other cores. */ if (sockevent & CBB_SOCKET_EVENT_POWER) { cbb_clrb(sc, CBB_SOCKET_MASK, CBB_SOCKET_EVENT_POWER); @@ -733,21 +762,15 @@ cbb_pci_filt(void *arg) atomic_add_int(&sc->powerintr, 1); wakeup((void *)&sc->powerintr); } + + /* + * Status change interrupts aren't presently used in the + * rest of the driver. For now, just ACK them. + */ + if (sockevent & CBB_SOCKET_EVENT_CSTS) + cbb_set(sc, CBB_SOCKET_EVENT, CBB_SOCKET_EVENT_CSTS); retval = FILTER_HANDLED; } - /* - * Some chips also require us to read the old ExCA registe for - * card status change when we route CSC vis PCI. This isn't supposed - * to be required, but it clears the interrupt state on some chipsets. - * Maybe there's a setting that would obviate its need. Maybe we - * should test the status bits and deal with them, but so far we've - * not found any machines that don't also give us the socket status - * indication above. - * - * We have to call this unconditionally because some bridges deliver - * the event independent of the CBB_SOCKET_EVENT_CD above. - */ - exca_getb(&sc->exca[0], EXCA_CSC); return retval; } |