summaryrefslogtreecommitdiffstats
path: root/sys/dev/ofw
diff options
context:
space:
mode:
authormarius <marius@FreeBSD.org>2004-08-12 17:41:33 +0000
committermarius <marius@FreeBSD.org>2004-08-12 17:41:33 +0000
commitf8c9f3a5e2940ba4fac814bea5bf4f4728dcd87b (patch)
treee750b2d26d6511903970a6a2a5d73da06845d58b /sys/dev/ofw
parent482740a238b6b7d0f1c649d1d3391e801547f668 (diff)
downloadFreeBSD-src-f8c9f3a5e2940ba4fac814bea5bf4f4728dcd87b.zip
FreeBSD-src-f8c9f3a5e2940ba4fac814bea5bf4f4728dcd87b.tar.gz
- Introduce an ofw_bus kobj-interface for retrieving the OFW node and a
subset ("compatible", "device_type", "model" and "name") of the standard properties in drivers for devices on Open Firmware supported busses. The standard properties "reg", "interrupts" und "address" are not covered by this interface because they are only of interest in the respective bridge code. There's a remaining standard property "status" which is unclear how to support properly but which also isn't used in FreeBSD at present. This ofw_bus kobj-interface allows to replace the various (ebus_get_node(), ofw_pci_get_node(), etc.) and partially inconsistent (central_get_type() vs. sbus_get_device_type(), etc.) existing IVAR ones with a common one. This in turn allows to simplify and remove code-duplication in drivers for devices that can hang off of more than one OFW supported bus. - Convert the sparc64 Central, EBus, FHC, PCI and SBus bus drivers and the drivers for their children to use the ofw_bus kobj-interface. The IVAR- interfaces of the Central, EBus and FHC are entirely replaced by this. The PCI bus driver used its own kobj-interface and now also uses the ofw_bus one. The IVARs special to the SBus, e.g. for retrieving the burst size, remain. Beware: this causes an ABI-breakage for modules of drivers which used the IVAR-interfaces, i.e. esp(4), hme(4), isp(4) and uart(4), which need to be recompiled. The style-inconsistencies introduced in some of the bus drivers will be fixed by tmm@ in a generic clean-up of the respective drivers later (he requested to add the changes in the "new" style). - Convert the powerpc MacIO bus driver and the drivers for its children to use the ofw_bus kobj-interface. This invloves removing the IVARs related to the "reg" property which were unused and a leftover from the NetBSD origini of the code. There's no ABI-breakage caused by this because none of these driver are currently built as modules. There are other powerpc bus drivers which can be converted to the ofw_bus kobj-interface, e.g. the PCI bus driver, which should be done together with converting powerpc to use the OFW PCI code from sparc64. - Make the SBus and FHC front-end of zs(4) and the sparc64 eeprom(4) take advantage of the ofw_bus kobj-interface and simplify them a bit. Reviewed by: grehan, tmm Approved by: re (scottl) Discussed with: tmm Tested with: Sun AX1105, AXe, Ultra 2, Ultra 60; PPC cross-build on i386
Diffstat (limited to 'sys/dev/ofw')
-rw-r--r--sys/dev/ofw/ofw_bus.h73
-rw-r--r--sys/dev/ofw/ofw_bus_if.m110
2 files changed, 183 insertions, 0 deletions
diff --git a/sys/dev/ofw/ofw_bus.h b/sys/dev/ofw/ofw_bus.h
new file mode 100644
index 0000000..3f4fbae
--- /dev/null
+++ b/sys/dev/ofw/ofw_bus.h
@@ -0,0 +1,73 @@
+/*-
+ * Copyright (c) 2001, 2003 by Thomas Moestl <tmm@FreeBSD.org>
+ * Copyright (c) 2004 by Marius Strobl <marius@FreeBSD.org>
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * $FreeBSD$
+ */
+
+#ifndef _DEV_OFW_OFW_BUS_H_
+#define _DEV_OFW_OFW_BUS_H_
+
+#include <sys/bus.h>
+
+#include <dev/ofw/openfirm.h>
+
+#include "ofw_bus_if.h"
+
+static __inline const char *
+ofw_bus_get_compat(device_t dev)
+{
+
+ return (OFW_BUS_GET_COMPAT(device_get_parent(dev), dev));
+}
+
+static __inline const char *
+ofw_bus_get_model(device_t dev)
+{
+
+ return (OFW_BUS_GET_MODEL(device_get_parent(dev), dev));
+}
+
+static __inline const char *
+ofw_bus_get_name(device_t dev)
+{
+
+ return (OFW_BUS_GET_NAME(device_get_parent(dev), dev));
+}
+
+static __inline phandle_t
+ofw_bus_get_node(device_t dev)
+{
+
+ return (OFW_BUS_GET_NODE(device_get_parent(dev), dev));
+}
+
+static __inline const char *
+ofw_bus_get_type(device_t dev)
+{
+
+ return (OFW_BUS_GET_TYPE(device_get_parent(dev), dev));
+}
+
+#endif /* !_DEV_OFW_OFW_BUS_H_ */
diff --git a/sys/dev/ofw/ofw_bus_if.m b/sys/dev/ofw/ofw_bus_if.m
new file mode 100644
index 0000000..87e4fcc
--- /dev/null
+++ b/sys/dev/ofw/ofw_bus_if.m
@@ -0,0 +1,110 @@
+# Copyright (c) 2001, 2003 by Thomas Moestl <tmm@FreeBSD.org>
+# Copyright (c) 2004 by Marius Strobl <marius@FreeBSD.org>
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without
+# modification, are permitted provided that the following conditions
+# are met:
+# 1. Redistributions of source code must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+# 2. Redistributions in binary form must reproduce the above copyright
+# notice, this list of conditions and the following disclaimer in the
+# documentation and/or other materials provided with the distribution.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+# OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+# IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
+# INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+# SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+# CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+# OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+# USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+#
+# $FreeBSD$
+
+#include <sys/bus.h>
+#include <machine/bus.h>
+
+#include <dev/ofw/openfirm.h>
+
+INTERFACE ofw_bus;
+
+CODE {
+ static ofw_bus_get_compat_t ofw_bus_default_get_compat;
+ static ofw_bus_get_model_t ofw_bus_default_get_model;
+ static ofw_bus_get_name_t ofw_bus_default_get_name;
+ static ofw_bus_get_node_t ofw_bus_default_get_node;
+ static ofw_bus_get_type_t ofw_bus_default_get_type;
+
+ static const char *
+ ofw_bus_default_get_compat(device_t bus, device_t dev)
+ {
+
+ return (NULL);
+ }
+
+ static const char *
+ ofw_bus_default_get_model(device_t bus, device_t dev)
+ {
+
+ return (NULL);
+ }
+
+ static const char *
+ ofw_bus_default_get_name(device_t bus, device_t dev)
+ {
+
+ return (NULL);
+ }
+
+ static phandle_t
+ ofw_bus_default_get_node(device_t bus, device_t dev)
+ {
+
+ return (0);
+ }
+
+ static const char *
+ ofw_bus_default_get_type(device_t bus, device_t dev)
+ {
+
+ return (NULL);
+ }
+};
+
+# Get the alternate firmware name for the device dev on the bus. The default
+# method will return NULL, which means the device doesn't have such a property.
+METHOD const char * get_compat {
+ device_t bus;
+ device_t dev;
+} DEFAULT ofw_bus_default_get_compat;
+
+# Get the firmware model name for the device dev on the bus. The default method
+# will return NULL, which means the device doesn't have such a property.
+METHOD const char * get_model {
+ device_t bus;
+ device_t dev;
+} DEFAULT ofw_bus_default_get_model;
+
+# Get the firmware name for the device dev on the bus. The default method will
+# return NULL, which means the device doesn't have such a property.
+METHOD const char * get_name {
+ device_t bus;
+ device_t dev;
+} DEFAULT ofw_bus_default_get_name;
+
+# Get the firmware node for the device dev on the bus. The default method will
+# return 0, which signals that there is no such node.
+METHOD phandle_t get_node {
+ device_t bus;
+ device_t dev;
+} DEFAULT ofw_bus_default_get_node;
+
+# Get the firmware device type for the device dev on the bus. The default
+# method will return NULL, which means the device doesn't have such a property.
+METHOD const char * get_type {
+ device_t bus;
+ device_t dev;
+} DEFAULT ofw_bus_default_get_type;
OpenPOWER on IntegriCloud