- Updated to the latest myri10ge firmware

- Added support for multicast filtering, now that the firmware
  supports it.  Note that this is not yet tested, as multicast
  seems to panic -current (even w/o mxge loaded)
- Added workaround to cope with different irq data struct size on
  pre-multicast firmware which can found running on nics.
- Added Intel E5000 PCIe chipsets to list providing aligned completions.
- Replaced various magic constants with #defines, now that they are
  defined in the firmware headers.

1 files changed, 42 insertions, 5 deletions

diff --git a/sys/dev/mxge/mxge_mcp.h b/sys/dev/mxge/mxge_mcp.h
index fda2944..79d7249 100644
--- a/sys/dev/mxge/mxge_mcp.h
+++ b/sys/dev/mxge/mxge_mcp.h
@@ -147,7 +147,19 @@ typedef struct mcp_kreq_ether_recv mcp_kreq_ether_recv_t;
 
 /* Commands */
 
-#define MXGEFW_CMD_OFFSET 0xf80000
+#define	MXGEFW_BOOT_HANDOFF	0xfc0000
+#define	MXGEFW_BOOT_DUMMY_RDMA	0xfc01c0
+
+#define	MXGEFW_ETH_CMD		0xf80000
+#define	MXGEFW_ETH_SEND_4	0x200000
+#define	MXGEFW_ETH_SEND_1	0x240000
+#define	MXGEFW_ETH_SEND_2	0x280000
+#define	MXGEFW_ETH_SEND_3	0x2c0000
+#define	MXGEFW_ETH_RECV_SMALL	0x300000
+#define	MXGEFW_ETH_RECV_BIG	0x340000
+
+#define	MXGEFW_ETH_SEND(n)		(0x200000 + (((n) & 0x03) * 0x40000))
+#define	MXGEFW_ETH_SEND_OFFSET(n)	(MXGEFW_ETH_SEND(n) - MXGEFW_ETH_SEND_4)
 
 enum myri10ge_mcp_cmd_type {
   MXGEFW_CMD_NONE = 0,
@@ -212,7 +224,7 @@ enum myri10ge_mcp_cmd_type {
   MXGEFW_CMD_SET_MTU,
   MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET,  /* in microseconds */
   MXGEFW_CMD_SET_STATS_INTERVAL,   /* in microseconds */
-  MXGEFW_CMD_SET_STATS_DMA,
+  MXGEFW_CMD_SET_STATS_DMA_OBSOLETE, /* replaced by SET_STATS_DMA_V2 */
 
   MXGEFW_ENABLE_PROMISC,
   MXGEFW_DISABLE_PROMISC,
@@ -226,7 +238,26 @@ enum myri10ge_mcp_cmd_type {
      data2       = RDMA length (MSH), WDMA length (LSH)
      command return data = repetitions (MSH), 0.5-ms ticks (LSH)
   */
-  MXGEFW_DMA_TEST
+  MXGEFW_DMA_TEST,
+
+  MXGEFW_ENABLE_ALLMULTI,
+  MXGEFW_DISABLE_ALLMULTI,
+
+  /* returns MXGEFW_CMD_ERROR_MULTICAST
+     if there is no room in the cache
+     data0,MSH(data1) = multicast group address */
+  MXGEFW_JOIN_MULTICAST_GROUP,
+  /* returns MXGEFW_CMD_ERROR_MULTICAST
+     if the address is not in the cache,
+     or is equal to FF-FF-FF-FF-FF-FF
+     data0,MSH(data1) = multicast group address */
+  MXGEFW_LEAVE_MULTICAST_GROUP,
+  MXGEFW_LEAVE_ALL_MULTICAST_GROUPS,
+
+  MXGEFW_CMD_SET_STATS_DMA_V2,
+  /* data0, data1 = bus addr,
+     data2 = sizeof(struct mcp_irq_data) from driver point of view, allows
+     adding new stuff to mcp_irq_data without changing the ABI */
 };
 typedef enum myri10ge_mcp_cmd_type myri10ge_mcp_cmd_type_t;
 
@@ -240,13 +271,19 @@ enum myri10ge_mcp_cmd_status {
   MXGEFW_CMD_ERROR_CLOSED,
   MXGEFW_CMD_ERROR_HASH_ERROR,
   MXGEFW_CMD_ERROR_BAD_PORT,
-  MXGEFW_CMD_ERROR_RESOURCES
+  MXGEFW_CMD_ERROR_RESOURCES,
+  MXGEFW_CMD_ERROR_MULTICAST
 };
 typedef enum myri10ge_mcp_cmd_status myri10ge_mcp_cmd_status_t;
 
 
-/* 40 Bytes */
+#define MXGEFW_OLD_IRQ_DATA_LEN 40
+
 struct mcp_irq_data {
+  /* add new counters at the beginning */
+  uint32_t future_use[5];
+  uint32_t dropped_multicast_filtered;
+/* 40 Bytes */
   uint32_t send_done_count;
 
   uint32_t link_up;