NEWCARD/Cardbus -

This commit adds support for Xircom X3201 based cardbus cards.
Support for the TDK 78Q2120 MII is also added.
IBM Etherjet, Intel and Xircom cards uses these chips.

Note that as a result of this commit, some Intel/DEC 21143 based cardbus
cards will also attach, but not get link.  That is being looked at.

1 files changed, 362 insertions, 0 deletions

diff --git a/sys/dev/mii/tdkphy.c b/sys/dev/mii/tdkphy.c
new file mode 100644
index 0000000..e0cc5d8
--- /dev/null
+++ b/sys/dev/mii/tdkphy.c
@@ -0,0 +1,362 @@
+/*
+ * Copyright (c) 2000,2001 Jonathan Chen.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification, immediately at the beginning of the file.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in
+ *    the documentation and/or other materials provided with the
+ *    distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ * $FreeBSD$
+ */
+
+/*
+ * Driver for the TDK 78Q2120 MII
+ *
+ * References:
+ *   Datasheet for the 78Q2120 - http://www.tsc.tdk.com/lan/78q2120.pdf
+ *   Most of this code stolen from ukphy.c
+ */
+
+/*
+ * The TDK 78Q2120 is found on some Xircom X3201 based cardbus cards.  It's just
+ * like any other normal phy, except it does auto negotiation in a different
+ * way.
+ */
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/kernel.h>
+#include <sys/malloc.h>
+#include <sys/socket.h>
+#include <sys/errno.h>
+#include <sys/module.h>
+#include <sys/bus.h>
+
+#include <net/if.h>
+#include <net/if_media.h>
+
+#include <machine/clock.h>
+
+#include <dev/mii/mii.h>
+#include <dev/mii/miivar.h>
+#include <dev/mii/miidevs.h>
+
+#include <dev/mii/tdkphyreg.h>
+
+#include "miibus_if.h"
+
+#if !defined(lint)
+static const char rcsid[] =
+  "$Id: tdkphy.c,v 1.3 2000/10/14 06:20:56 jon Exp $";
+#endif
+
+static int tdkphy_probe			__P((device_t));
+static int tdkphy_attach		__P((device_t));
+static int tdkphy_detach		__P((device_t));
+
+static device_method_t tdkphy_methods[] = {
+	/* device interface */
+	DEVMETHOD(device_probe,		tdkphy_probe),
+	DEVMETHOD(device_attach,	tdkphy_attach),
+	DEVMETHOD(device_detach,	tdkphy_detach),
+	DEVMETHOD(device_shutdown,	bus_generic_shutdown),
+	{ 0, 0 }
+};
+
+static devclass_t tdkphy_devclass;
+
+static driver_t tdkphy_driver = {
+	"tdkphy",
+	tdkphy_methods,
+	sizeof(struct mii_softc)
+};
+
+DRIVER_MODULE(tdkphy, miibus, tdkphy_driver, tdkphy_devclass, 0, 0);
+
+int	tdkphy_service __P((struct mii_softc *, struct mii_data *, int));
+void	tdkphy_status __P((struct mii_softc *));
+
+static int
+tdkphy_probe(device_t dev)
+{
+        struct mii_attach_args *ma;
+        ma = device_get_ivars(dev);
+ 	if ((MII_OUI(ma->mii_id1, ma->mii_id2) != MII_OUI_TDK ||
+	     MII_MODEL(ma->mii_id2) != MII_MODEL_TDK_78Q2120))
+		return (ENXIO);
+
+	device_set_desc(dev, MII_STR_TDK_78Q2120);
+	return (0);
+}
+
+static int
+tdkphy_attach(device_t dev)
+{
+	struct mii_softc *sc;
+	struct mii_attach_args *ma;
+	struct mii_data *mii;
+	sc = device_get_softc(dev);
+	ma = device_get_ivars(dev);
+	sc->mii_dev = device_get_parent(dev);
+	mii = device_get_softc(sc->mii_dev);
+	LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list);
+
+	if (bootverbose)
+		device_printf(dev, "OUI 0x%06x, model 0x%04x, rev. %d\n",
+		    MII_OUI(ma->mii_id1, ma->mii_id2),
+		    MII_MODEL(ma->mii_id2), MII_REV(ma->mii_id2));
+
+	sc->mii_inst = mii->mii_instance;
+	sc->mii_phy = ma->mii_phyno;
+	sc->mii_service = tdkphy_service;
+	sc->mii_pdata = mii;
+
+	mii->mii_instance++;
+
+	sc->mii_flags |= MIIF_NOISOLATE;
+
+#define	ADD(m, c)	ifmedia_add(&mii->mii_media, (m), (c), NULL)
+
+	ADD(IFM_MAKEWORD(IFM_ETHER, IFM_NONE, 0, sc->mii_inst),
+	    BMCR_ISO);
+#if 0
+	ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_LOOP, sc->mii_inst),
+	    BMCR_LOOP|BMCR_S100);
+#endif
+
+	mii_phy_reset(sc);
+
+	sc->mii_capabilities =
+	    PHY_READ(sc, MII_BMSR) & ma->mii_capmask;
+	device_printf(dev, " ");
+	if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0)
+		printf("no media present");
+	else
+		mii_add_media(mii, sc->mii_capabilities,
+		    sc->mii_inst);
+	printf("\n");
+#undef ADD
+
+	MIIBUS_MEDIAINIT(sc->mii_dev);
+
+	return(0);
+}
+
+static int tdkphy_detach(device_t dev)
+{
+	struct mii_softc *sc;
+	struct mii_data *mii;
+
+	sc = device_get_softc(dev);
+	mii = device_get_softc(device_get_parent(dev));
+	sc->mii_dev = NULL;
+	LIST_REMOVE(sc, mii_list);
+
+	return(0);
+}
+
+int
+tdkphy_service(struct mii_softc *sc, struct mii_data *mii, int cmd)
+{
+	struct ifmedia_entry *ife = mii->mii_media.ifm_cur;
+	int reg;
+
+	switch (cmd) {
+	case MII_POLLSTAT:
+		/*
+		 * If we're not polling our PHY instance, just return.
+		 */
+		if (IFM_INST(ife->ifm_media) != sc->mii_inst)
+			return (0);
+		break;
+
+	case MII_MEDIACHG:
+		/*
+		 * If the media indicates a different PHY instance,
+		 * isolate ourselves.
+		 */
+		if (IFM_INST(ife->ifm_media) != sc->mii_inst) {
+			reg = PHY_READ(sc, MII_BMCR);
+			PHY_WRITE(sc, MII_BMCR, reg | BMCR_ISO);
+			return (0);
+		}
+
+		/*
+		 * If the interface is not up, don't do anything.
+		 */
+		if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
+			break;
+
+		switch (IFM_SUBTYPE(ife->ifm_media)) {
+		case IFM_AUTO:
+			/*
+			 * If we're already in auto mode, just return.
+			 */
+			if (PHY_READ(sc, MII_BMCR) & BMCR_AUTOEN)
+				return (0);
+			(void) mii_phy_auto(sc, 1);
+			break;
+		case IFM_100_T4:
+			/*
+			 * Not supported on MII
+			 */
+			return (EINVAL);
+		default:
+			/*
+			 * BMCR data is stored in the ifmedia entry.
+			 */
+			PHY_WRITE(sc, MII_ANAR,
+			    mii_anar(ife->ifm_media));
+			PHY_WRITE(sc, MII_BMCR, ife->ifm_data);
+		}
+		break;
+
+	case MII_TICK:
+		/*
+		 * If we're not currently selected, just return.
+		 */
+		if (IFM_INST(ife->ifm_media) != sc->mii_inst)
+			return (0);
+
+		/*
+		 * Only used for autonegotiation.
+		 */
+		if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO)
+			return (0);
+
+		/*
+		 * Is the interface even up?
+		 */
+		if ((mii->mii_ifp->if_flags & IFF_UP) == 0)
+			return (0);
+
+		/*
+		 * Check to see if we have link.  If we do, we don't
+		 * need to restart the autonegotiation process.  Read
+		 * the BMSR twice in case it's latched.
+		 */
+		reg = PHY_READ(sc, MII_BMSR) |
+		    PHY_READ(sc, MII_BMSR);
+		if (reg & BMSR_LINK)
+			return (0);
+
+		/*
+		 * Only retry autonegotiation every 5 seconds.
+		 */
+		if (++sc->mii_ticks != 5)
+			return (0);
+
+		sc->mii_ticks = 0;
+		mii_phy_reset(sc);
+		if (mii_phy_auto(sc, 0) == EJUSTRETURN)
+			return (0);
+		break;
+	}
+
+	/* Update the media status. */
+	tdkphy_status(sc);
+	if (sc->mii_pdata->mii_media_active & IFM_FDX)
+		PHY_WRITE(sc, MII_BMCR, PHY_READ(sc, MII_BMCR) | BMCR_FDX);
+	else
+		PHY_WRITE(sc, MII_BMCR, PHY_READ(sc, MII_BMCR) & ~BMCR_FDX);
+	/* Callback if something changed. */
+	if (sc->mii_active != mii->mii_media_active || cmd == MII_MEDIACHG) {
+		MIIBUS_STATCHG(sc->mii_dev);
+		sc->mii_active = mii->mii_media_active;
+	}
+	return (0);
+}
+
+void
+tdkphy_status(struct mii_softc *phy)
+{
+	struct mii_data *mii = phy->mii_pdata;
+	int bmsr, bmcr, anlpar, diag;
+
+	mii->mii_media_status = IFM_AVALID;
+	mii->mii_media_active = IFM_ETHER;
+
+	bmsr = PHY_READ(phy, MII_BMSR) | PHY_READ(phy, MII_BMSR);
+	if (bmsr & BMSR_LINK)
+		mii->mii_media_status |= IFM_ACTIVE;
+
+	bmcr = PHY_READ(phy, MII_BMCR);
+	if (bmcr & BMCR_ISO) {
+		mii->mii_media_active |= IFM_NONE;
+		mii->mii_media_status = 0;
+		return;
+	}
+
+	if (bmcr & BMCR_LOOP)
+		mii->mii_media_active |= IFM_LOOP;
+
+	if (bmcr & BMCR_AUTOEN) {
+		/*
+		 * NWay autonegotiation takes the highest-order common
+		 * bit of the ANAR and ANLPAR (i.e. best media advertised
+		 * both by us and our link partner).
+		 */
+		if ((bmsr & BMSR_ACOMP) == 0) {
+			/* Erg, still trying, I guess... */
+			mii->mii_media_active |= IFM_NONE;
+			return;
+		}
+
+		anlpar = PHY_READ(phy, MII_ANAR) & PHY_READ(phy, MII_ANLPAR);
+		/*
+		 * ANLPAR doesn't get set on my card, but we check it anyway,
+		 * since it is mentioned in the 78Q2120 specs.
+		 */
+		if (anlpar & ANLPAR_T4)
+			mii->mii_media_active |= IFM_100_T4;
+		else if (anlpar & ANLPAR_TX_FD)
+			mii->mii_media_active |= IFM_100_TX|IFM_FDX;
+		else if (anlpar & ANLPAR_TX)
+			mii->mii_media_active |= IFM_100_TX;
+		else if (anlpar & ANLPAR_10_FD)
+			mii->mii_media_active |= IFM_10_T|IFM_FDX;
+		else if (anlpar & ANLPAR_10)
+			mii->mii_media_active |= IFM_10_T;
+		else {
+			/*
+			 * ANLPAR isn't set, which leaves two possibilities:
+			 * 1) Auto negotiation failed
+			 * 2) Auto negotiation completed, but the card forgot
+			 *    to set ANLPAR.
+			 * So we check the MII_DIAG(18) register...
+			 */
+			diag = PHY_READ(phy, MII_DIAG);
+			if (diag & DIAG_NEGFAIL) /* assume 10baseT if no neg */
+				mii->mii_media_active |= IFM_10_T;
+			else {
+				if (diag & DIAG_DUPLEX)
+					mii->mii_media_active |= IFM_FDX;
+				if (diag & DIAG_RATE_100)
+					mii->mii_media_active |= IFM_100_TX;
+				else
+					mii->mii_media_active |= IFM_10_T;
+			}
+		}
+	} else {
+		mii->mii_media_active = mii_media_from_bmcr(bmcr);
+	}
+}