diff options
author | jfv <jfv@FreeBSD.org> | 2009-04-10 02:45:00 +0000 |
---|---|---|
committer | jfv <jfv@FreeBSD.org> | 2009-04-10 02:45:00 +0000 |
commit | 9fcc70de74585cb50ad7e66252ee1d76b7fdce9a (patch) | |
tree | fddeb8e80535a8e3a9ebe2696832c4b044da139b /sys/dev/ixgbe | |
parent | 92f8b7d44a3ea47ae557763560b0921b499e20b8 (diff) | |
download | FreeBSD-src-9fcc70de74585cb50ad7e66252ee1d76b7fdce9a.zip FreeBSD-src-9fcc70de74585cb50ad7e66252ee1d76b7fdce9a.tar.gz |
Add missing file, sorry bout that :)
Diffstat (limited to 'sys/dev/ixgbe')
-rw-r--r-- | sys/dev/ixgbe/ixgbe_82599.c | 2444 |
1 files changed, 2444 insertions, 0 deletions
diff --git a/sys/dev/ixgbe/ixgbe_82599.c b/sys/dev/ixgbe/ixgbe_82599.c new file mode 100644 index 0000000..4f438a2 --- /dev/null +++ b/sys/dev/ixgbe/ixgbe_82599.c @@ -0,0 +1,2444 @@ +/****************************************************************************** + + Copyright (c) 2001-2009, Intel Corporation + All rights reserved. + + Redistribution and use in source and binary forms, with or without + modification, are permitted provided that the following conditions are met: + + 1. Redistributions of source code must retain the above copyright notice, + this list of conditions and the following disclaimer. + + 2. Redistributions in binary form must reproduce the above copyright + notice, this list of conditions and the following disclaimer in the + documentation and/or other materials provided with the distribution. + + 3. Neither the name of the Intel Corporation nor the names of its + contributors may be used to endorse or promote products derived from + this software without specific prior written permission. + + THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" + AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE + LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR + CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF + SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS + INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) + ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE + POSSIBILITY OF SUCH DAMAGE. + +******************************************************************************/ +/*$FreeBSD$*/ + +#include "ixgbe_type.h" +#include "ixgbe_api.h" +#include "ixgbe_common.h" +#include "ixgbe_phy.h" + +u32 ixgbe_get_pcie_msix_count_82599(struct ixgbe_hw *hw); +s32 ixgbe_init_ops_82599(struct ixgbe_hw *hw); +s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *autoneg); +enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw); +s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw); +s32 ixgbe_setup_mac_link_speed_multispeed_fiber(struct ixgbe_hw *hw, + ixgbe_link_speed speed, bool autoneg, + bool autoneg_wait_to_complete); +s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw); +s32 ixgbe_check_mac_link_82599(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *link_up, bool link_up_wait_to_complete); +s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); +static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw); +static s32 ixgbe_setup_copper_link_speed_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete); +s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw); +void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw); +s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw); +s32 ixgbe_set_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq); +s32 ixgbe_clear_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq); +s32 ixgbe_insert_mac_addr_82599(struct ixgbe_hw *hw, u8 *addr, u32 vmdq); +s32 ixgbe_set_vfta_82599(struct ixgbe_hw *hw, u32 vlan, + u32 vind, bool vlan_on); +s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw); +s32 ixgbe_init_uta_tables_82599(struct ixgbe_hw *hw); +s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val); +s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val); +s32 ixgbe_start_hw_rev_1_82599(struct ixgbe_hw *hw); +s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw); +s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw); +u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw); +s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval); +s32 ixgbe_get_san_mac_addr_offset_82599(struct ixgbe_hw *hw, + u16 *san_mac_offset); +s32 ixgbe_get_san_mac_addr_82599(struct ixgbe_hw *hw, u8 *san_mac_addr); +s32 ixgbe_set_san_mac_addr_82599(struct ixgbe_hw *hw, u8 *san_mac_addr); +s32 ixgbe_get_device_caps_82599(struct ixgbe_hw *hw, u16 *device_caps); + +void ixgbe_init_mac_link_ops_82599(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + + DEBUGFUNC("ixgbe_init_mac_link_ops_82599"); + + if (hw->phy.multispeed_fiber) { + /* Set up dual speed SFP+ support */ + mac->ops.setup_link = + &ixgbe_setup_mac_link_multispeed_fiber; + mac->ops.setup_link_speed = + &ixgbe_setup_mac_link_speed_multispeed_fiber; + } else { + mac->ops.setup_link = + &ixgbe_setup_mac_link_82599; + mac->ops.setup_link_speed = + &ixgbe_setup_mac_link_speed_82599; + } +} + +/** + * ixgbe_init_phy_ops_82599 - PHY/SFP specific init + * @hw: pointer to hardware structure + * + * Initialize any function pointers that were not able to be + * set during init_shared_code because the PHY/SFP type was + * not known. Perform the SFP init if necessary. + * + **/ +s32 ixgbe_init_phy_ops_82599(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + struct ixgbe_phy_info *phy = &hw->phy; + s32 ret_val = IXGBE_SUCCESS; + + DEBUGFUNC("ixgbe_init_phy_ops_82599"); + + /* Identify the PHY or SFP module */ + ret_val = phy->ops.identify(hw); + if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto init_phy_ops_out; + + /* Setup function pointers based on detected SFP module and speeds */ + ixgbe_init_mac_link_ops_82599(hw); + if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) + hw->phy.ops.reset = NULL; + + /* If copper media, overwrite with copper function pointers */ + if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) { + mac->ops.setup_link = &ixgbe_setup_copper_link_82599; + mac->ops.setup_link_speed = + &ixgbe_setup_copper_link_speed_82599; + mac->ops.get_link_capabilities = + &ixgbe_get_copper_link_capabilities_generic; + } + + /* Set necessary function pointers based on phy type */ + switch (hw->phy.type) { + case ixgbe_phy_tn: + phy->ops.check_link = &ixgbe_check_phy_link_tnx; + phy->ops.get_firmware_version = + &ixgbe_get_phy_firmware_version_tnx; + break; + case ixgbe_phy_aq: + phy->ops.get_firmware_version = + &ixgbe_get_phy_firmware_version_aq; + break; + default: + break; + } +init_phy_ops_out: + return ret_val; +} + +s32 ixgbe_setup_sfp_modules_82599(struct ixgbe_hw *hw) +{ + s32 ret_val = IXGBE_SUCCESS; + u16 list_offset, data_offset, data_value; + + DEBUGFUNC("ixgbe_setup_sfp_modules_82599"); + + if (hw->phy.sfp_type != ixgbe_sfp_type_unknown) { + ixgbe_init_mac_link_ops_82599(hw); + + hw->phy.ops.reset = NULL; + + ret_val = ixgbe_get_sfp_init_sequence_offsets(hw, &list_offset, + &data_offset); + if (ret_val != IXGBE_SUCCESS) + goto setup_sfp_out; + + hw->eeprom.ops.read(hw, ++data_offset, &data_value); + while (data_value != 0xffff) { + IXGBE_WRITE_REG(hw, IXGBE_CORECTL, data_value); + IXGBE_WRITE_FLUSH(hw); + hw->eeprom.ops.read(hw, ++data_offset, &data_value); + } + /* Now restart DSP */ + IXGBE_WRITE_REG(hw, IXGBE_CORECTL, 0x00000102); + IXGBE_WRITE_REG(hw, IXGBE_CORECTL, 0x00000b1d); + IXGBE_WRITE_FLUSH(hw); + } + +setup_sfp_out: + return ret_val; +} + +/** + * ixgbe_get_pcie_msix_count_82599 - Gets MSI-X vector count + * @hw: pointer to hardware structure + * + * Read PCIe configuration space, and get the MSI-X vector count from + * the capabilities table. + **/ +u32 ixgbe_get_pcie_msix_count_82599(struct ixgbe_hw *hw) +{ + u32 msix_count = 64; + + if (hw->mac.msix_vectors_from_pcie) { + msix_count = IXGBE_READ_PCIE_WORD(hw, + IXGBE_PCIE_MSIX_82599_CAPS); + msix_count &= IXGBE_PCIE_MSIX_TBL_SZ_MASK; + + /* MSI-X count is zero-based in HW, so increment to give + * proper value */ + msix_count++; + } + + return msix_count; +} + +/** + * ixgbe_init_ops_82599 - Inits func ptrs and MAC type + * @hw: pointer to hardware structure + * + * Initialize the function pointers and assign the MAC type for 82599. + * Does not touch the hardware. + **/ + +s32 ixgbe_init_ops_82599(struct ixgbe_hw *hw) +{ + struct ixgbe_mac_info *mac = &hw->mac; + struct ixgbe_phy_info *phy = &hw->phy; + s32 ret_val; + + ret_val = ixgbe_init_phy_ops_generic(hw); + ret_val = ixgbe_init_ops_generic(hw); + + /* PHY */ + phy->ops.identify = &ixgbe_identify_phy_82599; + phy->ops.init = &ixgbe_init_phy_ops_82599; + + /* MAC */ + mac->ops.reset_hw = &ixgbe_reset_hw_82599; + mac->ops.get_media_type = &ixgbe_get_media_type_82599; + mac->ops.get_supported_physical_layer = + &ixgbe_get_supported_physical_layer_82599; + mac->ops.enable_rx_dma = &ixgbe_enable_rx_dma_82599; + mac->ops.read_analog_reg8 = &ixgbe_read_analog_reg8_82599; + mac->ops.write_analog_reg8 = &ixgbe_write_analog_reg8_82599; + mac->ops.start_hw = &ixgbe_start_hw_rev_1_82599; + mac->ops.get_san_mac_addr = &ixgbe_get_san_mac_addr_82599; + mac->ops.set_san_mac_addr = &ixgbe_set_san_mac_addr_82599; + mac->ops.get_device_caps = &ixgbe_get_device_caps_82599; + + /* RAR, Multicast, VLAN */ + mac->ops.set_vmdq = &ixgbe_set_vmdq_82599; + mac->ops.clear_vmdq = &ixgbe_clear_vmdq_82599; + mac->ops.insert_mac_addr = &ixgbe_insert_mac_addr_82599; + mac->rar_highwater = 1; + mac->ops.set_vfta = &ixgbe_set_vfta_82599; + mac->ops.clear_vfta = &ixgbe_clear_vfta_82599; + mac->ops.init_uta_tables = &ixgbe_init_uta_tables_82599; + mac->ops.setup_sfp = &ixgbe_setup_sfp_modules_82599; + + /* Link */ + mac->ops.get_link_capabilities = &ixgbe_get_link_capabilities_82599; + mac->ops.check_link = &ixgbe_check_mac_link_82599; + ixgbe_init_mac_link_ops_82599(hw); + + mac->mcft_size = 128; + mac->vft_size = 128; + mac->num_rar_entries = 128; + mac->max_tx_queues = 128; + mac->max_rx_queues = 128; + mac->max_msix_vectors = ixgbe_get_pcie_msix_count_82599(hw); + + return ret_val; +} + +/** + * ixgbe_get_link_capabilities_82599 - Determines link capabilities + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @negotiation: TRUE when autoneg or autotry is enabled + * + * Determines the link capabilities by reading the AUTOC register. + **/ +s32 ixgbe_get_link_capabilities_82599(struct ixgbe_hw *hw, + ixgbe_link_speed *speed, + bool *negotiation) +{ + s32 status = IXGBE_SUCCESS; + u32 autoc = 0; + + /* + * Determine link capabilities based on the stored value of AUTOC, + * which represents EEPROM defaults. If AUTOC value has not + * been stored, use the current register values. + */ + if (hw->mac.orig_link_settings_stored) + autoc = hw->mac.orig_autoc; + else + autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + + switch (autoc & IXGBE_AUTOC_LMS_MASK) { + case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = FALSE; + break; + + case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: + *speed = IXGBE_LINK_SPEED_10GB_FULL; + *negotiation = FALSE; + break; + + case IXGBE_AUTOC_LMS_1G_AN: + *speed = IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = TRUE; + break; + + case IXGBE_AUTOC_LMS_10G_SERIAL: + *speed = IXGBE_LINK_SPEED_10GB_FULL; + *negotiation = FALSE; + break; + + case IXGBE_AUTOC_LMS_KX4_KX_KR: + case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN: + *speed = IXGBE_LINK_SPEED_UNKNOWN; + if (autoc & IXGBE_AUTOC_KR_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX_SUPP) + *speed |= IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = TRUE; + break; + + case IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII: + *speed = IXGBE_LINK_SPEED_100_FULL; + if (autoc & IXGBE_AUTOC_KR_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + *speed |= IXGBE_LINK_SPEED_10GB_FULL; + if (autoc & IXGBE_AUTOC_KX_SUPP) + *speed |= IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = TRUE; + break; + + case IXGBE_AUTOC_LMS_SGMII_1G_100M: + *speed = IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_100_FULL; + *negotiation = FALSE; + break; + + default: + status = IXGBE_ERR_LINK_SETUP; + goto out; + break; + } + + if (hw->phy.multispeed_fiber) { + *speed |= IXGBE_LINK_SPEED_10GB_FULL | + IXGBE_LINK_SPEED_1GB_FULL; + *negotiation = TRUE; + } + +out: + return status; +} + +/** + * ixgbe_get_media_type_82599 - Get media type + * @hw: pointer to hardware structure + * + * Returns the media type (fiber, copper, backplane) + **/ +enum ixgbe_media_type ixgbe_get_media_type_82599(struct ixgbe_hw *hw) +{ + enum ixgbe_media_type media_type; + + /* Detect if there is a copper PHY attached. */ + if (hw->phy.type == ixgbe_phy_cu_unknown || + hw->phy.type == ixgbe_phy_tn || + hw->phy.type == ixgbe_phy_aq) { + media_type = ixgbe_media_type_copper; + goto out; + } + + switch (hw->device_id) { + case IXGBE_DEV_ID_82599_KX4: + /* Default device ID is mezzanine card KX/KX4 */ + media_type = ixgbe_media_type_backplane; + break; + case IXGBE_DEV_ID_82599_SFP: + media_type = ixgbe_media_type_fiber; + break; + case IXGBE_DEV_ID_82599_CX4: + media_type = ixgbe_media_type_fiber; + break; + default: + media_type = ixgbe_media_type_unknown; + break; + } +out: + return media_type; +} + +/** + * ixgbe_setup_mac_link_82599 - Setup MAC link settings + * @hw: pointer to hardware structure + * + * Configures link settings based on values in the ixgbe_hw struct. + * Restarts the link. Performs autonegotiation if needed. + **/ +s32 ixgbe_setup_mac_link_82599(struct ixgbe_hw *hw) +{ + u32 autoc_reg; + u32 links_reg; + u32 i; + s32 status = IXGBE_SUCCESS; + + /* Restart link */ + autoc_reg = IXGBE_READ_REG(hw, IXGBE_AUTOC); + autoc_reg |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc_reg); + + /* Only poll for autoneg to complete if specified to do so */ + if (hw->phy.autoneg_wait_to_complete) { + if ((autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_KX_KR || + (autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN + || (autoc_reg & IXGBE_AUTOC_LMS_MASK) == + IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { + links_reg = 0; /* Just in case Autoneg time = 0 */ + for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + if (links_reg & IXGBE_LINKS_KX_AN_COMP) + break; + msec_delay(100); + } + if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { + status = IXGBE_ERR_AUTONEG_NOT_COMPLETE; + DEBUGOUT("Autoneg did not complete.\n"); + } + } + } + + /* Add delay to filter out noises during initial link setup */ + msec_delay(50); + + return status; +} + +/** + * ixgbe_setup_mac_link_multispeed_fiber - Setup MAC link settings + * @hw: pointer to hardware structure + * + * Configures link settings based on values in the ixgbe_hw struct. + * Restarts the link for multi-speed fiber at 1G speed, if link + * fails at 10G. + * Performs autonegotiation if needed. + **/ +s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_SUCCESS; + ixgbe_link_speed link_speed = IXGBE_LINK_SPEED_82599_AUTONEG; + DEBUGFUNC("ixgbe_setup_mac_link_multispeed_fiber"); + + status = ixgbe_setup_mac_link_speed_multispeed_fiber(hw, + link_speed, TRUE, true); + return status; +} + +/** + * ixgbe_setup_mac_link_speed_multispeed_fiber - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: TRUE if autonegotiation enabled + * @autoneg_wait_to_complete: TRUE when waiting for completion is needed + * + * Set the link speed in the AUTOC register and restarts link. + **/ +s32 ixgbe_setup_mac_link_speed_multispeed_fiber(struct ixgbe_hw *hw, + ixgbe_link_speed speed, bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status = IXGBE_SUCCESS; + ixgbe_link_speed link_speed; + ixgbe_link_speed highest_link_speed = IXGBE_LINK_SPEED_UNKNOWN; + u32 speedcnt = 0; + u32 esdp_reg = IXGBE_READ_REG(hw, IXGBE_ESDP); + bool link_up = FALSE; + bool negotiation; + + /* Mask off requested but non-supported speeds */ + status = ixgbe_get_link_capabilities(hw, &link_speed, &negotiation); + if (status != IXGBE_SUCCESS) + goto out; + + speed &= link_speed; + + /* + * Try each speed one by one, highest priority first. We do this in + * software because 10gb fiber doesn't support speed autonegotiation. + */ + if (speed & IXGBE_LINK_SPEED_10GB_FULL) { + speedcnt++; + highest_link_speed = IXGBE_LINK_SPEED_10GB_FULL; + + /* If we already have link at this speed, just jump out */ + status = ixgbe_check_link(hw, &link_speed, &link_up, FALSE); + if (status != IXGBE_SUCCESS) + goto out; + + if ((link_speed == IXGBE_LINK_SPEED_10GB_FULL) && link_up) + goto out; + + /* Set hardware SDP's */ + esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5); + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + + /* Allow module to change analog characteristics (1G->10G) */ + msec_delay(40); + + status = ixgbe_setup_mac_link_speed_82599( + hw, IXGBE_LINK_SPEED_10GB_FULL, autoneg, + autoneg_wait_to_complete); + if (status != IXGBE_SUCCESS) + goto out; + + msec_delay(100); + + /* If we have link, just jump out */ + status = ixgbe_check_link(hw, &link_speed, &link_up, FALSE); + if (status != IXGBE_SUCCESS) + goto out; + + if (link_up) + goto out; + } + + if (speed & IXGBE_LINK_SPEED_1GB_FULL) { + speedcnt++; + if (highest_link_speed == IXGBE_LINK_SPEED_UNKNOWN) + highest_link_speed = IXGBE_LINK_SPEED_1GB_FULL; + + /* If we already have link at this speed, just jump out */ + status = ixgbe_check_link(hw, &link_speed, &link_up, FALSE); + if (status != IXGBE_SUCCESS) + goto out; + + if ((link_speed == IXGBE_LINK_SPEED_1GB_FULL) && link_up) + goto out; + + /* Set hardware SDP's */ + esdp_reg &= ~IXGBE_ESDP_SDP5; + esdp_reg |= IXGBE_ESDP_SDP5_DIR; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + + /* Allow module to change analog characteristics (10G->1G) */ + msec_delay(40); + + status = ixgbe_setup_mac_link_speed_82599( + hw, IXGBE_LINK_SPEED_1GB_FULL, autoneg, + autoneg_wait_to_complete); + if (status != IXGBE_SUCCESS) + goto out; + + msec_delay(100); + + /* If we have link, just jump out */ + status = ixgbe_check_link(hw, &link_speed, &link_up, FALSE); + if (status != IXGBE_SUCCESS) + goto out; + + if (link_up) + goto out; + } + + /* + * We didn't get link. Configure back to the highest speed we tried, + * (if there was more than one). We call ourselves back with just the + * single highest speed that the user requested. + */ + if (speedcnt > 1) + status = ixgbe_setup_mac_link_speed_multispeed_fiber(hw, + highest_link_speed, autoneg, autoneg_wait_to_complete); + +out: + return status; +} + +/** + * ixgbe_check_mac_link_82599 - Determine link and speed status + * @hw: pointer to hardware structure + * @speed: pointer to link speed + * @link_up: TRUE when link is up + * @link_up_wait_to_complete: bool used to wait for link up or not + * + * Reads the links register to determine if link is up and the current speed + **/ +s32 ixgbe_check_mac_link_82599(struct ixgbe_hw *hw, ixgbe_link_speed *speed, + bool *link_up, bool link_up_wait_to_complete) +{ + u32 links_reg; + u32 i; + + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + if (link_up_wait_to_complete) { + for (i = 0; i < IXGBE_LINK_UP_TIME; i++) { + if (links_reg & IXGBE_LINKS_UP) { + *link_up = TRUE; + break; + } else { + *link_up = FALSE; + } + msec_delay(100); + links_reg = IXGBE_READ_REG(hw, IXGBE_LINKS); + } + } else { + if (links_reg & IXGBE_LINKS_UP) + *link_up = TRUE; + else + *link_up = FALSE; + } + + if ((links_reg & IXGBE_LINKS_SPEED_82599) == + IXGBE_LINKS_SPEED_10G_82599) + *speed = IXGBE_LINK_SPEED_10GB_FULL; + else if ((links_reg & IXGBE_LINKS_SPEED_82599) == + IXGBE_LINKS_SPEED_1G_82599) + *speed = IXGBE_LINK_SPEED_1GB_FULL; + else + *speed = IXGBE_LINK_SPEED_100_FULL; + + /* if link is down, zero out the current_mode */ + if (*link_up == FALSE) { + hw->fc.current_mode = ixgbe_fc_none; + hw->fc.fc_was_autonegged = FALSE; + } + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_setup_mac_link_speed_82599 - Set MAC link speed + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: TRUE if autonegotiation enabled + * @autoneg_wait_to_complete: TRUE when waiting for completion is needed + * + * Set the link speed in the AUTOC register and restarts link. + **/ +s32 ixgbe_setup_mac_link_speed_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status = IXGBE_SUCCESS; + u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + u32 orig_autoc = 0; + u32 link_mode = autoc & IXGBE_AUTOC_LMS_MASK; + u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; + u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK; + u32 links_reg; + u32 i; + ixgbe_link_speed link_capabilities = IXGBE_LINK_SPEED_UNKNOWN; + + /* Check to see if speed passed in is supported. */ + status = ixgbe_get_link_capabilities(hw, &link_capabilities, &autoneg); + if (status != IXGBE_SUCCESS) + goto out; + + speed &= link_capabilities; + + /* Use stored value (EEPROM defaults) of AUTOC to find KR/KX4 support*/ + if (hw->mac.orig_link_settings_stored) + orig_autoc = hw->mac.orig_autoc; + else + orig_autoc = autoc; + + + if (speed == IXGBE_LINK_SPEED_UNKNOWN) { + status = IXGBE_ERR_LINK_SETUP; + } else if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { + /* Set KX4/KX/KR support according to speed requested */ + autoc &= ~(IXGBE_AUTOC_KX4_KX_SUPP_MASK | IXGBE_AUTOC_KR_SUPP); + if (speed & IXGBE_LINK_SPEED_10GB_FULL) + if (orig_autoc & IXGBE_AUTOC_KX4_SUPP) + autoc |= IXGBE_AUTOC_KX4_SUPP; + if (orig_autoc & IXGBE_AUTOC_KR_SUPP) + autoc |= IXGBE_AUTOC_KR_SUPP; + if (speed & IXGBE_LINK_SPEED_1GB_FULL) + autoc |= IXGBE_AUTOC_KX_SUPP; + } else if ((pma_pmd_1g == IXGBE_AUTOC_1G_SFI) && + (link_mode == IXGBE_AUTOC_LMS_1G_LINK_NO_AN || + link_mode == IXGBE_AUTOC_LMS_1G_AN)) { + /* Switch from 1G SFI to 10G SFI if requested */ + if ((speed == IXGBE_LINK_SPEED_10GB_FULL) && + (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI)) { + autoc &= ~IXGBE_AUTOC_LMS_MASK; + autoc |= IXGBE_AUTOC_LMS_10G_SERIAL; + } + } else if ((pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) && + (link_mode == IXGBE_AUTOC_LMS_10G_SERIAL)) { + /* Switch from 10G SFI to 1G SFI if requested */ + if ((speed == IXGBE_LINK_SPEED_1GB_FULL) && + (pma_pmd_1g == IXGBE_AUTOC_1G_SFI)) { + autoc &= ~IXGBE_AUTOC_LMS_MASK; + if (autoneg) + autoc |= IXGBE_AUTOC_LMS_1G_AN; + else + autoc |= IXGBE_AUTOC_LMS_1G_LINK_NO_AN; + } + } + + if (status == IXGBE_SUCCESS) { + /* Restart link */ + autoc |= IXGBE_AUTOC_AN_RESTART; + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, autoc); + + /* Only poll for autoneg to complete if specified to do so */ + if (autoneg_wait_to_complete) { + if (link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN || + link_mode == IXGBE_AUTOC_LMS_KX4_KX_KR_SGMII) { + links_reg = 0; /*Just in case Autoneg time=0*/ + for (i = 0; i < IXGBE_AUTO_NEG_TIME; i++) { + links_reg = + IXGBE_READ_REG(hw, IXGBE_LINKS); + if (links_reg & IXGBE_LINKS_KX_AN_COMP) + break; + msec_delay(100); + } + if (!(links_reg & IXGBE_LINKS_KX_AN_COMP)) { + status = + IXGBE_ERR_AUTONEG_NOT_COMPLETE; + DEBUGOUT("Autoneg did not complete.\n"); + } + } + } + + /* Add delay to filter out noises during initial link setup */ + msec_delay(50); + } + +out: + return status; +} + +/** + * ixgbe_setup_copper_link_82599 - Setup copper link settings + * @hw: pointer to hardware structure + * + * Restarts the link on PHY and then MAC. Performs autonegotiation if needed. + **/ +static s32 ixgbe_setup_copper_link_82599(struct ixgbe_hw *hw) +{ + s32 status; + + /* Restart autonegotiation on PHY */ + status = hw->phy.ops.setup_link(hw); + + /* Set up MAC */ + ixgbe_setup_mac_link_82599(hw); + + return status; +} + +/** + * ixgbe_setup_copper_link_speed_82599 - Set the PHY autoneg advertised field + * @hw: pointer to hardware structure + * @speed: new link speed + * @autoneg: TRUE if autonegotiation enabled + * @autoneg_wait_to_complete: TRUE if waiting is needed to complete + * + * Restarts link on PHY and MAC based on settings passed in. + **/ +static s32 ixgbe_setup_copper_link_speed_82599(struct ixgbe_hw *hw, + ixgbe_link_speed speed, + bool autoneg, + bool autoneg_wait_to_complete) +{ + s32 status; + + /* Setup the PHY according to input speed */ + status = hw->phy.ops.setup_link_speed(hw, speed, autoneg, + autoneg_wait_to_complete); + /* Set up MAC */ + ixgbe_setup_mac_link_82599(hw); + + return status; +} +/** + * ixgbe_reset_hw_82599 - Perform hardware reset + * @hw: pointer to hardware structure + * + * Resets the hardware by resetting the transmit and receive units, masks + * and clears all interrupts, perform a PHY reset, and perform a link (MAC) + * reset. + **/ +s32 ixgbe_reset_hw_82599(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_SUCCESS; + u32 ctrl, ctrl_ext; + u32 i; + u32 autoc; + u32 autoc2; + + /* Call adapter stop to disable tx/rx and clear interrupts */ + hw->mac.ops.stop_adapter(hw); + + /* PHY ops must be identified and initialized prior to reset */ + + /* Identify PHY and related function pointers */ + status = hw->phy.ops.init(hw); + + if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto reset_hw_out; + + + /* Setup SFP module if there is one present. */ + if (hw->phy.sfp_setup_needed) { + status = hw->mac.ops.setup_sfp(hw); + hw->phy.sfp_setup_needed = FALSE; + } + + if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) + goto reset_hw_out; + + /* Reset PHY */ + if (hw->phy.reset_disable == FALSE && hw->phy.ops.reset != NULL) + hw->phy.ops.reset(hw); + + /* + * Prevent the PCI-E bus from from hanging by disabling PCI-E master + * access and verify no pending requests before reset + */ + status = ixgbe_disable_pcie_master(hw); + if (status != IXGBE_SUCCESS) { + status = IXGBE_ERR_MASTER_REQUESTS_PENDING; + DEBUGOUT("PCI-E Master disable polling has failed.\n"); + } + + /* + * Issue global reset to the MAC. This needs to be a SW reset. + * If link reset is used, it might reset the MAC when mng is using it + */ + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + IXGBE_WRITE_REG(hw, IXGBE_CTRL, (ctrl | IXGBE_CTRL_RST)); + IXGBE_WRITE_FLUSH(hw); + + /* Poll for reset bit to self-clear indicating reset is complete */ + for (i = 0; i < 10; i++) { + usec_delay(1); + ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); + if (!(ctrl & IXGBE_CTRL_RST)) + break; + } + if (ctrl & IXGBE_CTRL_RST) { + status = IXGBE_ERR_RESET_FAILED; + DEBUGOUT("Reset polling failed to complete.\n"); + } + /* Clear PF Reset Done bit so PF/VF Mail Ops can work */ + ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT); + ctrl_ext |= IXGBE_CTRL_EXT_PFRSTD; + IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext); + + msec_delay(50); + + + + /* + * Store the original AUTOC/AUTOC2 values if they have not been + * stored off yet. Otherwise restore the stored original + * values since the reset operation sets back to defaults. + */ + autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + if (hw->mac.orig_link_settings_stored == FALSE) { + hw->mac.orig_autoc = autoc; + hw->mac.orig_autoc2 = autoc2; + hw->mac.orig_link_settings_stored = TRUE; + } else { + if (autoc != hw->mac.orig_autoc) + IXGBE_WRITE_REG(hw, IXGBE_AUTOC, (hw->mac.orig_autoc | + IXGBE_AUTOC_AN_RESTART)); + + if ((autoc2 & IXGBE_AUTOC2_UPPER_MASK) != + (hw->mac.orig_autoc2 & IXGBE_AUTOC2_UPPER_MASK)) { + autoc2 &= ~IXGBE_AUTOC2_UPPER_MASK; + autoc2 |= (hw->mac.orig_autoc2 & + IXGBE_AUTOC2_UPPER_MASK); + IXGBE_WRITE_REG(hw, IXGBE_AUTOC2, autoc2); + } + } + + /* + * Store MAC address from RAR0, clear receive address registers, and + * clear the multicast table. Also reset num_rar_entries to 128, + * since we modify this value when programming the SAN MAC address. + */ + hw->mac.num_rar_entries = 128; + hw->mac.ops.init_rx_addrs(hw); + + /* Store the permanent mac address */ + hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); + + /* Store the permanent SAN mac address */ + hw->mac.ops.get_san_mac_addr(hw, hw->mac.san_addr); + + /* Add the SAN MAC address to the RAR only if it's a valid address */ + if (ixgbe_validate_mac_addr(hw->mac.san_addr) == 0) { + hw->mac.ops.set_rar(hw, hw->mac.num_rar_entries - 1, + hw->mac.san_addr, 0, IXGBE_RAH_AV); + + /* Reserve the last RAR for the SAN MAC address */ + hw->mac.num_rar_entries--; + } + +reset_hw_out: + return status; +} + +/** + * ixgbe_insert_mac_addr_82599 - Find a RAR for this mac address + * @hw: pointer to hardware structure + * @addr: Address to put into receive address register + * @vmdq: VMDq pool to assign + * + * Puts an ethernet address into a receive address register, or + * finds the rar that it is aleady in; adds to the pool list + **/ +s32 ixgbe_insert_mac_addr_82599(struct ixgbe_hw *hw, u8 *addr, u32 vmdq) +{ + static const u32 NO_EMPTY_RAR_FOUND = 0xFFFFFFFF; + u32 first_empty_rar = NO_EMPTY_RAR_FOUND; + u32 rar; + u32 rar_low, rar_high; + u32 addr_low, addr_high; + + /* swap bytes for HW little endian */ + addr_low = addr[0] | (addr[1] << 8) + | (addr[2] << 16) + | (addr[3] << 24); + addr_high = addr[4] | (addr[5] << 8); + + /* + * Either find the mac_id in rar or find the first empty space. + * rar_highwater points to just after the highest currently used + * rar in order to shorten the search. It grows when we add a new + * rar to the top. + */ + for (rar = 0; rar < hw->mac.rar_highwater; rar++) { + rar_high = IXGBE_READ_REG(hw, IXGBE_RAH(rar)); + + if (((IXGBE_RAH_AV & rar_high) == 0) + && first_empty_rar == NO_EMPTY_RAR_FOUND) { + first_empty_rar = rar; + } else if ((rar_high & 0xFFFF) == addr_high) { + rar_low = IXGBE_READ_REG(hw, IXGBE_RAL(rar)); + if (rar_low == addr_low) + break; /* found it already in the rars */ + } + } + + if (rar < hw->mac.rar_highwater) { + /* already there so just add to the pool bits */ + ixgbe_set_vmdq(hw, rar, vmdq); + } else if (first_empty_rar != NO_EMPTY_RAR_FOUND) { + /* stick it into first empty RAR slot we found */ + rar = first_empty_rar; + ixgbe_set_rar(hw, rar, addr, vmdq, IXGBE_RAH_AV); + } else if (rar == hw->mac.rar_highwater) { + /* add it to the top of the list and inc the highwater mark */ + ixgbe_set_rar(hw, rar, addr, vmdq, IXGBE_RAH_AV); + hw->mac.rar_highwater++; + } else if (rar >= hw->mac.num_rar_entries) { + return IXGBE_ERR_INVALID_MAC_ADDR; + } + + /* + * If we found rar[0], make sure the default pool bit (we use pool 0) + * remains cleared to be sure default pool packets will get delivered + */ + if (rar == 0) + ixgbe_clear_vmdq(hw, rar, 0); + + return rar; +} + +/** + * ixgbe_clear_vmdq_82599 - Disassociate a VMDq pool index from a rx address + * @hw: pointer to hardware struct + * @rar: receive address register index to disassociate + * @vmdq: VMDq pool index to remove from the rar + **/ +s32 ixgbe_clear_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq) +{ + u32 mpsar_lo, mpsar_hi; + u32 rar_entries = hw->mac.num_rar_entries; + + if (rar < rar_entries) { + mpsar_lo = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); + mpsar_hi = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); + + if (!mpsar_lo && !mpsar_hi) + goto done; + + if (vmdq == IXGBE_CLEAR_VMDQ_ALL) { + if (mpsar_lo) { + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), 0); + mpsar_lo = 0; + } + if (mpsar_hi) { + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), 0); + mpsar_hi = 0; + } + } else if (vmdq < 32) { + mpsar_lo &= ~(1 << vmdq); + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar_lo); + } else { + mpsar_hi &= ~(1 << (vmdq - 32)); + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar_hi); + } + + /* was that the last pool using this rar? */ + if (mpsar_lo == 0 && mpsar_hi == 0 && rar != 0) + hw->mac.ops.clear_rar(hw, rar); + } else { + DEBUGOUT1("RAR index %d is out of range.\n", rar); + } + +done: + return IXGBE_SUCCESS; +} + +/** + * ixgbe_set_vmdq_82599 - Associate a VMDq pool index with a rx address + * @hw: pointer to hardware struct + * @rar: receive address register index to associate with a VMDq index + * @vmdq: VMDq pool index + **/ +s32 ixgbe_set_vmdq_82599(struct ixgbe_hw *hw, u32 rar, u32 vmdq) +{ + u32 mpsar; + u32 rar_entries = hw->mac.num_rar_entries; + + if (rar < rar_entries) { + if (vmdq < 32) { + mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_LO(rar)); + mpsar |= 1 << vmdq; + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_LO(rar), mpsar); + } else { + mpsar = IXGBE_READ_REG(hw, IXGBE_MPSAR_HI(rar)); + mpsar |= 1 << (vmdq - 32); + IXGBE_WRITE_REG(hw, IXGBE_MPSAR_HI(rar), mpsar); + } + } else { + DEBUGOUT1("RAR index %d is out of range.\n", rar); + } + return IXGBE_SUCCESS; +} + +/** + * ixgbe_set_vfta_82599 - Set VLAN filter table + * @hw: pointer to hardware structure + * @vlan: VLAN id to write to VLAN filter + * @vind: VMDq output index that maps queue to VLAN id in VFVFB + * @vlan_on: boolean flag to turn on/off VLAN in VFVF + * + * Turn on/off specified VLAN in the VLAN filter table. + **/ +s32 ixgbe_set_vfta_82599(struct ixgbe_hw *hw, u32 vlan, u32 vind, + bool vlan_on) +{ + u32 regindex; + u32 bitindex; + u32 bits; + u32 first_empty_slot; + + if (vlan > 4095) + return IXGBE_ERR_PARAM; + + /* + * this is a 2 part operation - first the VFTA, then the + * VLVF and VLVFB if vind is set + */ + + /* Part 1 + * The VFTA is a bitstring made up of 128 32-bit registers + * that enable the particular VLAN id, much like the MTA: + * bits[11-5]: which register + * bits[4-0]: which bit in the register + */ + regindex = (vlan >> 5) & 0x7F; + bitindex = vlan & 0x1F; + bits = IXGBE_READ_REG(hw, IXGBE_VFTA(regindex)); + if (vlan_on) + bits |= (1 << bitindex); + else + bits &= ~(1 << bitindex); + IXGBE_WRITE_REG(hw, IXGBE_VFTA(regindex), bits); + + + /* Part 2 + * If the vind is set + * Either vlan_on + * make sure the vlan is in VLVF + * set the vind bit in the matching VLVFB + * Or !vlan_on + * clear the pool bit and possibly the vind + */ + if (vind) { + /* find the vlanid or the first empty slot */ + first_empty_slot = 0; + + for (regindex = 1; regindex < IXGBE_VLVF_ENTRIES; regindex++) { + bits = IXGBE_READ_REG(hw, IXGBE_VLVF(regindex)); + if (!bits && !first_empty_slot) + first_empty_slot = regindex; + else if ((bits & 0x0FFF) == vlan) + break; + } + + if (regindex >= IXGBE_VLVF_ENTRIES) { + if (first_empty_slot) + regindex = first_empty_slot; + else { + DEBUGOUT("No space in VLVF.\n"); + goto out; + } + } + + + if (vlan_on) { + /* set the pool bit */ + if (vind < 32) { + bits = + IXGBE_READ_REG(hw, IXGBE_VLVFB(regindex*2)); + bits |= (1 << vind); + IXGBE_WRITE_REG(hw, + IXGBE_VLVFB(regindex*2), bits); + } else { + bits = IXGBE_READ_REG(hw, + IXGBE_VLVFB((regindex*2)+1)); + bits |= (1 << vind); + IXGBE_WRITE_REG(hw, + IXGBE_VLVFB((regindex*2)+1), bits); + } + } else { + /* clear the pool bit */ + if (vind < 32) { + bits = IXGBE_READ_REG(hw, + IXGBE_VLVFB(regindex*2)); + bits &= ~(1 << vind); + IXGBE_WRITE_REG(hw, + IXGBE_VLVFB(regindex*2), bits); + bits |= IXGBE_READ_REG(hw, + IXGBE_VLVFB((regindex*2)+1)); + } else { + bits = IXGBE_READ_REG(hw, + IXGBE_VLVFB((regindex*2)+1)); + bits &= ~(1 << vind); + IXGBE_WRITE_REG(hw, + IXGBE_VLVFB((regindex*2)+1), bits); + bits |= IXGBE_READ_REG(hw, + IXGBE_VLVFB(regindex*2)); + } + } + + if (bits) + IXGBE_WRITE_REG(hw, IXGBE_VLVF(regindex), + (IXGBE_VLVF_VIEN | vlan)); + else + IXGBE_WRITE_REG(hw, IXGBE_VLVF(regindex), 0); + } + +out: + return IXGBE_SUCCESS; +} + +/** + * ixgbe_clear_vfta_82599 - Clear VLAN filter table + * @hw: pointer to hardware structure + * + * Clears the VLAN filer table, and the VMDq index associated with the filter + **/ +s32 ixgbe_clear_vfta_82599(struct ixgbe_hw *hw) +{ + u32 offset; + + for (offset = 0; offset < hw->mac.vft_size; offset++) + IXGBE_WRITE_REG(hw, IXGBE_VFTA(offset), 0); + + for (offset = 0; offset < IXGBE_VLVF_ENTRIES; offset++) { + IXGBE_WRITE_REG(hw, IXGBE_VLVF(offset), 0); + IXGBE_WRITE_REG(hw, IXGBE_VLVFB(offset*2), 0); + IXGBE_WRITE_REG(hw, IXGBE_VLVFB((offset*2)+1), 0); + } + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_init_uta_tables_82599 - Initialize the Unicast Table Array + * @hw: pointer to hardware structure + **/ +s32 ixgbe_init_uta_tables_82599(struct ixgbe_hw *hw) +{ + int i; + DEBUGOUT(" Clearing UTA\n"); + + for (i = 0; i < 128; i++) + IXGBE_WRITE_REG(hw, IXGBE_UTA(i), 0); + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_reinit_fdir_tables_82599 - Reinitialize Flow Director tables. + * @hw: pointer to hardware structure + **/ +s32 ixgbe_reinit_fdir_tables_82599(struct ixgbe_hw *hw) +{ + u32 fdirctrl = IXGBE_READ_REG(hw, IXGBE_FDIRCTRL); + fdirctrl &= ~IXGBE_FDIRCTRL_INIT_DONE; + IXGBE_WRITE_REG(hw, IXGBE_FDIRFREE, 0); + IXGBE_WRITE_FLUSH(hw); + IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl); + + return IXGBE_SUCCESS; +} + +#define IXGBE_FDIR_INIT_DONE_POLL 10 +/** + * ixgbe_init_fdir_signature_82599 - Initialize Flow Director signature filters + * @hw: pointer to hardware structure + * @pballoc: which mode to allocate filters with + **/ +s32 ixgbe_init_fdir_signature_82599(struct ixgbe_hw *hw, u32 pballoc) +{ + u32 fdirctrl = 0; + u32 pbsize; + int i; + + /* + * Before enabling Flow Director, the Rx Packet Buffer size + * must be reduced. The new value is the current size minus + * flow director memory usage size. + */ + pbsize = (1 << (IXGBE_FDIR_PBALLOC_SIZE_SHIFT + pballoc)); + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0), + (IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(0)) - pbsize)); + + /* + * The defaults in the HW for RX PB 1-7 are not zero and so should be + * intialized to zero for non DCB mode otherwise actual total RX PB + * would be bigger than programmed and filter space would run into + * the PB 0 region. + */ + for (i = 1; i < 8; i++) + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0); + + /* Send interrupt when 64 filters are left */ + fdirctrl |= 4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT; + + /* Set the maximum length per hash bucket to 0xA filters */ + fdirctrl |= 0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT; + + switch (pballoc) { + case IXGBE_FDIR_PBALLOC_64K: + /* 8k - 1 signature filters */ + fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_64K; + break; + case IXGBE_FDIR_PBALLOC_128K: + /* 16k - 1 signature filters */ + fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_128K; + break; + case IXGBE_FDIR_PBALLOC_256K: + /* 32k - 1 signature filters */ + fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_256K; + break; + default: + /* bad value */ + return IXGBE_ERR_CONFIG; + }; + + /* Move the flexible bytes to use the ethertype - shift 6 words */ + fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT); + + + /* Prime the keys for hashing */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, + IXGBE_HTONL(IXGBE_ATR_BUCKET_HASH_KEY)); + IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY, + IXGBE_HTONL(IXGBE_ATR_SIGNATURE_HASH_KEY)); + + /* + * Poll init-done after we write the register. Estimated times: + * 10G: PBALLOC = 11b, timing is 60us + * 1G: PBALLOC = 11b, timing is 600us + * 100M: PBALLOC = 11b, timing is 6ms + * + * Multiple these timings by 4 if under full Rx load + * + * So we'll poll for IXGBE_FDIR_INIT_DONE_POLL times, sleeping for + * 1 msec per poll time. If we're at line rate and drop to 100M, then + * this might not finish in our poll time, but we can live with that + * for now. + */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl); + IXGBE_WRITE_FLUSH(hw); + for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) { + if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) & + IXGBE_FDIRCTRL_INIT_DONE) + break; + msec_delay(1); + } + if (i >= IXGBE_FDIR_INIT_DONE_POLL) + DEBUGOUT("Flow Director Signature poll time exceeded!\n"); + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_init_fdir_perfect_82599 - Initialize Flow Director perfect filters + * @hw: pointer to hardware structure + * @pballoc: which mode to allocate filters with + **/ +s32 ixgbe_init_fdir_perfect_82599(struct ixgbe_hw *hw, u32 pballoc) +{ + u32 fdirctrl = 0; + u32 pbsize; + int i; + + /* + * Before enabling Flow Director, the Rx Packet Buffer size + * must be reduced. The new value is the current size minus + * flow director memory usage size. + */ + + pbsize = (1 << (IXGBE_FDIR_PBALLOC_SIZE_SHIFT + pballoc)); + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(0), + (IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(0)) - pbsize)); + + /* + * The defaults in the HW for RX PB 1-7 are not zero and so should be + * intialized to zero for non DCB mode otherwise actual total RX PB + * would be bigger than programmed and filter space would run into + * the PB 0 region. + */ + for (i = 1; i < 8; i++) + IXGBE_WRITE_REG(hw, IXGBE_RXPBSIZE(i), 0); + + /* Send interrupt when 64 filters are left */ + fdirctrl |= 4 << IXGBE_FDIRCTRL_FULL_THRESH_SHIFT; + + switch (pballoc) { + case IXGBE_FDIR_PBALLOC_64K: + /* 2k - 1 perfect filters */ + fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_64K; + break; + case IXGBE_FDIR_PBALLOC_128K: + /* 4k - 1 perfect filters */ + fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_128K; + break; + case IXGBE_FDIR_PBALLOC_256K: + /* 8k - 1 perfect filters */ + fdirctrl |= IXGBE_FDIRCTRL_PBALLOC_256K; + break; + default: + /* bad value */ + return IXGBE_ERR_CONFIG; + }; + + /* Turn perfect match filtering on */ + fdirctrl |= IXGBE_FDIRCTRL_PERFECT_MATCH; + fdirctrl |= IXGBE_FDIRCTRL_REPORT_STATUS; + + /* Move the flexible bytes to use the ethertype - shift 6 words */ + fdirctrl |= (0x6 << IXGBE_FDIRCTRL_FLEX_SHIFT); + + /* Prime the keys for hashing */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRHKEY, + IXGBE_HTONL(IXGBE_ATR_BUCKET_HASH_KEY)); + IXGBE_WRITE_REG(hw, IXGBE_FDIRSKEY, + IXGBE_HTONL(IXGBE_ATR_SIGNATURE_HASH_KEY)); + + /* + * Poll init-done after we write the register. Estimated times: + * 10G: PBALLOC = 11b, timing is 60us + * 1G: PBALLOC = 11b, timing is 600us + * 100M: PBALLOC = 11b, timing is 6ms + * + * Multiple these timings by 4 if under full Rx load + * + * So we'll poll for IXGBE_FDIR_INIT_DONE_POLL times, sleeping for + * 1 msec per poll time. If we're at line rate and drop to 100M, then + * this might not finish in our poll time, but we can live with that + * for now. + */ + + /* Set the maximum length per hash bucket to 0xA filters */ + fdirctrl |= (0xA << IXGBE_FDIRCTRL_MAX_LENGTH_SHIFT); + + IXGBE_WRITE_REG(hw, IXGBE_FDIRCTRL, fdirctrl); + IXGBE_WRITE_FLUSH(hw); + for (i = 0; i < IXGBE_FDIR_INIT_DONE_POLL; i++) { + if (IXGBE_READ_REG(hw, IXGBE_FDIRCTRL) & + IXGBE_FDIRCTRL_INIT_DONE) + break; + msec_delay(1); + } + if (i >= IXGBE_FDIR_INIT_DONE_POLL) + DEBUGOUT("Flow Director Perfect poll time exceeded!\n"); + + return IXGBE_SUCCESS; +} + + +/** + * ixgbe_atr_compute_hash_82599 - Compute the hashes for SW ATR + * @stream: input bitstream to compute the hash on + * @key: 32-bit hash key + **/ +u16 ixgbe_atr_compute_hash_82599(struct ixgbe_atr_input *atr_input, u32 key) +{ + /* + * The algorithm is as follows: + * Hash[15:0] = Sum { S[n] x K[n+16] }, n = 0...350 + * where Sum {A[n]}, n = 0...n is bitwise XOR of A[0], A[1]...A[n] + * and A[n] x B[n] is bitwise AND between same length strings + * + * K[n] is 16 bits, defined as: + * for n modulo 32 >= 15, K[n] = K[n % 32 : (n % 32) - 15] + * for n modulo 32 < 15, K[n] = + * K[(n % 32:0) | (31:31 - (14 - (n % 32)))] + * + * S[n] is 16 bits, defined as: + * for n >= 15, S[n] = S[n:n - 15] + * for n < 15, S[n] = S[(n:0) | (350:350 - (14 - n))] + * + * To simplify for programming, the algorithm is implemented + * in software this way: + * + * Key[31:0], Stream[335:0] + * + * tmp_key[11 * 32 - 1:0] = 11{Key[31:0] = key concatenated 11 times + * int_key[350:0] = tmp_key[351:1] + * int_stream[365:0] = Stream[14:0] | Stream[335:0] | Stream[335:321] + * + * hash[15:0] = 0; + * for (i = 0; i < 351; i++) { + * if (int_key[i]) + * hash ^= int_stream[(i + 15):i]; + * } + */ + + union { + u32 key[11]; + u8 key_stream[44]; + } tmp_key; + + u8 *stream = (u8 *)atr_input; + u8 int_key[44]; /* upper-most bit unused */ + u8 hash_str[46]; /* upper-most 2 bits unused */ + u16 hash_result = 0; + u16 tmp = 0; + int i, j, k, h; + + memset(&tmp_key, 0, sizeof(tmp_key)); + /* First load the temporary key stream */ + for (i = 0; i < 11; i++) + tmp_key.key[i] = key; + + /* + * Set the interim key for the hashing. Bit 352 is unused, so we must + * shift and compensate when building the key. + */ + int_key[0] = tmp_key.key_stream[0] >> 1; + for (i = 1, j = 0; i < 44; i++) { + int_key[i] = (tmp_key.key_stream[j] & 0x1) << 7; + j++; + int_key[i] |= tmp_key.key_stream[j] >> 1; + } + + /* + * Set the interim bit string for the hashing. Bits 368 and 367 are + * unused, so shift and compensate when building the string. + */ + hash_str[0] = (stream[40] & 0x7f) >> 1; + for (i = 1, j = 40; i < 46; i++) { + hash_str[i] = (stream[j] & 0x1) << 7; + j++; + if (j > 41) + j = 0; + hash_str[i] |= stream[j] >> 1; + } + + /* + * Now compute the hash. i is the index into hash_str, j is into our + * key stream, k is counting the number of bits, and h interates within + * each byte. + */ + for (i = 45, j = 43, k = 0; k < 351 && i >= 2 && j >= 0; i--, j--) { + for (h = 0; h < 8 && k < 351; h++, k++) { + if ((int_key[j] >> h) & 0x1) { + /* + * Key bit is set, XOR in the current 16-bit + * string. Example of processing: + * h = 0, + * tmp = (hash_str[i - 2] & 0 << 16) | + * (hash_str[i - 1] & 0xff << 8) | + * (hash_str[i] & 0xff >> 0) + * So tmp = hash_str[15 + k:k], since the + * i + 2 clause rolls off the 16-bit value + * h = 7, + * tmp = (hash_str[i - 2] & 0x7f << 9) | + * (hash_str[i - 1] & 0xff << 1) | + * (hash_str[i] & 0x80 >> 7) + */ + tmp = ((hash_str[i] & (0xff << h)) >> h); + tmp |= ((hash_str[i - 1] & 0xff) << (8 - h)); + tmp |= (hash_str[i - 2] & (0xff >> (8 - h))) + << (16 - h); + hash_result ^= tmp; + } + } + } + + return hash_result; +} + +/** + * ixgbe_atr_set_vlan_id_82599 - Sets the VLAN id in the ATR input stream + * @input: input stream to modify + * @vlan: the VLAN id to load + **/ +s32 ixgbe_atr_set_vlan_id_82599(struct ixgbe_atr_input *input, u16 vlan) +{ + input->byte_stream[IXGBE_ATR_VLAN_OFFSET + 1] = vlan >> 8; + input->byte_stream[IXGBE_ATR_VLAN_OFFSET] = vlan & 0xff; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_set_src_ipv4_82599 - Sets the source IPv4 address + * @input: input stream to modify + * @src_addr: the IP address to load + **/ +s32 ixgbe_atr_set_src_ipv4_82599(struct ixgbe_atr_input *input, u32 src_addr) +{ + input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 3] = src_addr >> 24; + input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 2] = + (src_addr >> 16) & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 1] = + (src_addr >> 8) & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET] = src_addr & 0xff; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_set_dst_ipv4_82599 - Sets the destination IPv4 address + * @input: input stream to modify + * @dst_addr: the IP address to load + **/ +s32 ixgbe_atr_set_dst_ipv4_82599(struct ixgbe_atr_input *input, u32 dst_addr) +{ + input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 3] = dst_addr >> 24; + input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 2] = + (dst_addr >> 16) & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 1] = + (dst_addr >> 8) & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET] = dst_addr & 0xff; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_set_src_ipv6_82599 - Sets the source IPv6 address + * @input: input stream to modify + * @src_addr_1: the first 4 bytes of the IP address to load + * @src_addr_2: the second 4 bytes of the IP address to load + * @src_addr_3: the third 4 bytes of the IP address to load + * @src_addr_4: the fourth 4 bytes of the IP address to load + **/ +s32 ixgbe_atr_set_src_ipv6_82599(struct ixgbe_atr_input *input, + u32 src_addr_1, u32 src_addr_2, + u32 src_addr_3, u32 src_addr_4) +{ + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET] = src_addr_4 & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 1] = + (src_addr_4 >> 8) & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 2] = + (src_addr_4 >> 16) & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 3] = src_addr_4 >> 24; + + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 4] = src_addr_3 & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 5] = + (src_addr_3 >> 8) & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 6] = + (src_addr_3 >> 16) & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 7] = src_addr_3 >> 24; + + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 8] = src_addr_2 & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 9] = + (src_addr_2 >> 8) & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 10] = + (src_addr_2 >> 16) & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 11] = src_addr_2 >> 24; + + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 12] = src_addr_1 & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 13] = + (src_addr_1 >> 8) & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 14] = + (src_addr_1 >> 16) & 0xff; + input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 15] = src_addr_1 >> 24; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_set_dst_ipv6_82599 - Sets the destination IPv6 address + * @input: input stream to modify + * @dst_addr_1: the first 4 bytes of the IP address to load + * @dst_addr_2: the second 4 bytes of the IP address to load + * @dst_addr_3: the third 4 bytes of the IP address to load + * @dst_addr_4: the fourth 4 bytes of the IP address to load + **/ +s32 ixgbe_atr_set_dst_ipv6_82599(struct ixgbe_atr_input *input, + u32 dst_addr_1, u32 dst_addr_2, + u32 dst_addr_3, u32 dst_addr_4) +{ + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET] = dst_addr_4 & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 1] = + (dst_addr_4 >> 8) & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 2] = + (dst_addr_4 >> 16) & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 3] = dst_addr_4 >> 24; + + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 4] = dst_addr_3 & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 5] = + (dst_addr_3 >> 8) & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 6] = + (dst_addr_3 >> 16) & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 7] = dst_addr_3 >> 24; + + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 8] = dst_addr_2 & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 9] = + (dst_addr_2 >> 8) & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 10] = + (dst_addr_2 >> 16) & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 11] = dst_addr_2 >> 24; + + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 12] = dst_addr_1 & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 13] = + (dst_addr_1 >> 8) & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 14] = + (dst_addr_1 >> 16) & 0xff; + input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 15] = dst_addr_1 >> 24; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_set_src_port_82599 - Sets the source port + * @input: input stream to modify + * @src_port: the source port to load + **/ +s32 ixgbe_atr_set_src_port_82599(struct ixgbe_atr_input *input, u16 src_port) +{ + input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET + 1] = src_port >> 8; + input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET] = src_port & 0xff; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_set_dst_port_82599 - Sets the destination port + * @input: input stream to modify + * @dst_port: the destination port to load + **/ +s32 ixgbe_atr_set_dst_port_82599(struct ixgbe_atr_input *input, u16 dst_port) +{ + input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET + 1] = dst_port >> 8; + input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET] = dst_port & 0xff; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_set_flex_byte_82599 - Sets the flexible bytes + * @input: input stream to modify + * @flex_bytes: the flexible bytes to load + **/ +s32 ixgbe_atr_set_flex_byte_82599(struct ixgbe_atr_input *input, u16 flex_byte) +{ + input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET + 1] = flex_byte >> 8; + input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET] = flex_byte & 0xff; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_set_vm_pool_82599 - Sets the Virtual Machine pool + * @input: input stream to modify + * @vm_pool: the Virtual Machine pool to load + **/ +s32 ixgbe_atr_set_vm_pool_82599(struct ixgbe_atr_input *input, u8 vm_pool) +{ + input->byte_stream[IXGBE_ATR_VM_POOL_OFFSET] = vm_pool; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_set_l4type_82599 - Sets the layer 4 packet type + * @input: input stream to modify + * @l4type: the layer 4 type value to load + **/ +s32 ixgbe_atr_set_l4type_82599(struct ixgbe_atr_input *input, u8 l4type) +{ + input->byte_stream[IXGBE_ATR_L4TYPE_OFFSET] = l4type; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_get_vlan_id_82599 - Gets the VLAN id from the ATR input stream + * @input: input stream to search + * @vlan: the VLAN id to load + **/ +s32 ixgbe_atr_get_vlan_id_82599(struct ixgbe_atr_input *input, u16 *vlan) +{ + *vlan = input->byte_stream[IXGBE_ATR_VLAN_OFFSET]; + *vlan |= input->byte_stream[IXGBE_ATR_VLAN_OFFSET + 1] << 8; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_get_src_ipv4_82599 - Gets the source IPv4 address + * @input: input stream to search + * @src_addr: the IP address to load + **/ +s32 ixgbe_atr_get_src_ipv4_82599(struct ixgbe_atr_input *input, u32 *src_addr) +{ + *src_addr = input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET]; + *src_addr |= input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 1] << 8; + *src_addr |= input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 2] << 16; + *src_addr |= input->byte_stream[IXGBE_ATR_SRC_IPV4_OFFSET + 3] << 24; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_get_dst_ipv4_82599 - Gets the destination IPv4 address + * @input: input stream to search + * @dst_addr: the IP address to load + **/ +s32 ixgbe_atr_get_dst_ipv4_82599(struct ixgbe_atr_input *input, u32 *dst_addr) +{ + *dst_addr = input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET]; + *dst_addr |= input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 1] << 8; + *dst_addr |= input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 2] << 16; + *dst_addr |= input->byte_stream[IXGBE_ATR_DST_IPV4_OFFSET + 3] << 24; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_get_src_ipv6_82599 - Gets the source IPv6 address + * @input: input stream to search + * @src_addr_1: the first 4 bytes of the IP address to load + * @src_addr_2: the second 4 bytes of the IP address to load + * @src_addr_3: the third 4 bytes of the IP address to load + * @src_addr_4: the fourth 4 bytes of the IP address to load + **/ +s32 ixgbe_atr_get_src_ipv6_82599(struct ixgbe_atr_input *input, + u32 *src_addr_1, u32 *src_addr_2, + u32 *src_addr_3, u32 *src_addr_4) +{ + *src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 12]; + *src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 13] << 8; + *src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 14] << 16; + *src_addr_1 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 15] << 24; + + *src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 8]; + *src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 9] << 8; + *src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 10] << 16; + *src_addr_2 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 11] << 24; + + *src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 4]; + *src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 5] << 8; + *src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 6] << 16; + *src_addr_3 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 7] << 24; + + *src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET]; + *src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 1] << 8; + *src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 2] << 16; + *src_addr_4 = input->byte_stream[IXGBE_ATR_SRC_IPV6_OFFSET + 3] << 24; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_get_dst_ipv6_82599 - Gets the destination IPv6 address + * @input: input stream to search + * @dst_addr_1: the first 4 bytes of the IP address to load + * @dst_addr_2: the second 4 bytes of the IP address to load + * @dst_addr_3: the third 4 bytes of the IP address to load + * @dst_addr_4: the fourth 4 bytes of the IP address to load + **/ +s32 ixgbe_atr_get_dst_ipv6_82599(struct ixgbe_atr_input *input, + u32 *dst_addr_1, u32 *dst_addr_2, + u32 *dst_addr_3, u32 *dst_addr_4) +{ + *dst_addr_1 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 12]; + *dst_addr_1 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 13] << 8; + *dst_addr_1 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 14] << 16; + *dst_addr_1 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 15] << 24; + + *dst_addr_2 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 8]; + *dst_addr_2 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 9] << 8; + *dst_addr_2 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 10] << 16; + *dst_addr_2 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 11] << 24; + + *dst_addr_3 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 4]; + *dst_addr_3 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 5] << 8; + *dst_addr_3 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 6] << 16; + *dst_addr_3 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 7] << 24; + + *dst_addr_4 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET]; + *dst_addr_4 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 1] << 8; + *dst_addr_4 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 2] << 16; + *dst_addr_4 = input->byte_stream[IXGBE_ATR_DST_IPV6_OFFSET + 3] << 24; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_get_src_port_82599 - Gets the source port + * @input: input stream to modify + * @src_port: the source port to load + * + * Even though the input is given in big-endian, the FDIRPORT registers + * expect the ports to be programmed in little-endian. Hence the need to swap + * endianness when retrieving the data. This can be confusing since the + * internal hash engine expects it to be big-endian. + **/ +s32 ixgbe_atr_get_src_port_82599(struct ixgbe_atr_input *input, u16 *src_port) +{ + *src_port = input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET] << 8; + *src_port |= input->byte_stream[IXGBE_ATR_SRC_PORT_OFFSET + 1]; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_get_dst_port_82599 - Gets the destination port + * @input: input stream to modify + * @dst_port: the destination port to load + * + * Even though the input is given in big-endian, the FDIRPORT registers + * expect the ports to be programmed in little-endian. Hence the need to swap + * endianness when retrieving the data. This can be confusing since the + * internal hash engine expects it to be big-endian. + **/ +s32 ixgbe_atr_get_dst_port_82599(struct ixgbe_atr_input *input, u16 *dst_port) +{ + *dst_port = input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET] << 8; + *dst_port |= input->byte_stream[IXGBE_ATR_DST_PORT_OFFSET + 1]; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_get_flex_byte_82599 - Gets the flexible bytes + * @input: input stream to modify + * @flex_bytes: the flexible bytes to load + **/ +s32 ixgbe_atr_get_flex_byte_82599(struct ixgbe_atr_input *input, u16 *flex_byte) +{ + *flex_byte = input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET]; + *flex_byte |= input->byte_stream[IXGBE_ATR_FLEX_BYTE_OFFSET + 1] << 8; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_get_vm_pool_82599 - Gets the Virtual Machine pool + * @input: input stream to modify + * @vm_pool: the Virtual Machine pool to load + **/ +s32 ixgbe_atr_get_vm_pool_82599(struct ixgbe_atr_input *input, u8 *vm_pool) +{ + *vm_pool = input->byte_stream[IXGBE_ATR_VM_POOL_OFFSET]; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_get_l4type_82599 - Gets the layer 4 packet type + * @input: input stream to modify + * @l4type: the layer 4 type value to load + **/ +s32 ixgbe_atr_get_l4type_82599(struct ixgbe_atr_input *input, u8 *l4type) +{ + *l4type = input->byte_stream[IXGBE_ATR_L4TYPE_OFFSET]; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_atr_add_signature_filter_82599 - Adds a signature hash filter + * @hw: pointer to hardware structure + * @stream: input bitstream + * @queue: queue index to direct traffic to + **/ +s32 ixgbe_fdir_add_signature_filter_82599(struct ixgbe_hw *hw, + struct ixgbe_atr_input *input, + u8 queue) +{ + u64 fdirhashcmd; + u64 fdircmd; + u32 fdirhash; + u16 bucket_hash, sig_hash; + u8 l4type; + + bucket_hash = ixgbe_atr_compute_hash_82599(input, + IXGBE_ATR_BUCKET_HASH_KEY); + + /* bucket_hash is only 15 bits */ + bucket_hash &= IXGBE_ATR_HASH_MASK; + + sig_hash = ixgbe_atr_compute_hash_82599(input, + IXGBE_ATR_SIGNATURE_HASH_KEY); + + /* Get the l4type in order to program FDIRCMD properly */ + /* lowest 2 bits are FDIRCMD.L4TYPE, third lowest bit is FDIRCMD.IPV6 */ + ixgbe_atr_get_l4type_82599(input, &l4type); + + /* + * The lower 32-bits of fdirhashcmd is for FDIRHASH, the upper 32-bits + * is for FDIRCMD. Then do a 64-bit register write from FDIRHASH. + */ + fdirhash = sig_hash << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT | bucket_hash; + + fdircmd = (IXGBE_FDIRCMD_CMD_ADD_FLOW | IXGBE_FDIRCMD_FILTER_UPDATE | + IXGBE_FDIRCMD_LAST | IXGBE_FDIRCMD_QUEUE_EN); + + switch (l4type & IXGBE_ATR_L4TYPE_MASK) { + case IXGBE_ATR_L4TYPE_TCP: + fdircmd |= IXGBE_FDIRCMD_L4TYPE_TCP; + break; + case IXGBE_ATR_L4TYPE_UDP: + fdircmd |= IXGBE_FDIRCMD_L4TYPE_UDP; + break; + case IXGBE_ATR_L4TYPE_SCTP: + fdircmd |= IXGBE_FDIRCMD_L4TYPE_SCTP; + break; + default: + DEBUGOUT(" Error on l4type input\n"); + return IXGBE_ERR_CONFIG; + } + + if (l4type & IXGBE_ATR_L4TYPE_IPV6_MASK) + fdircmd |= IXGBE_FDIRCMD_IPV6; + + fdircmd |= ((u64)queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT); + fdirhashcmd = ((fdircmd << 32) | fdirhash); + + DEBUGOUT2("Tx Queue=%x hash=%x\n", queue, fdirhash & 0x7FFF7FFF); + IXGBE_WRITE_REG64(hw, IXGBE_FDIRHASH, fdirhashcmd); + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_fdir_add_perfect_filter_82599 - Adds a perfect filter + * @hw: pointer to hardware structure + * @input: input bitstream + * @queue: queue index to direct traffic to + * + * Note that the caller to this function must lock before calling, since the + * hardware writes must be protected from one another. + **/ +s32 ixgbe_fdir_add_perfect_filter_82599(struct ixgbe_hw *hw, + struct ixgbe_atr_input *input, + u16 soft_id, + u8 queue) +{ + u32 fdircmd = 0; + u32 fdirhash; + u32 src_ipv4, dst_ipv4; + u32 src_ipv6_1, src_ipv6_2, src_ipv6_3, src_ipv6_4; + u16 src_port, dst_port, vlan_id, flex_bytes; + u16 bucket_hash; + u8 l4type; + + /* Get our input values */ + ixgbe_atr_get_l4type_82599(input, &l4type); + + /* + * Check l4type formatting, and bail out before we touch the hardware + * if there's a configuration issue + */ + switch (l4type & IXGBE_ATR_L4TYPE_MASK) { + case IXGBE_ATR_L4TYPE_TCP: + fdircmd |= IXGBE_FDIRCMD_L4TYPE_TCP; + break; + case IXGBE_ATR_L4TYPE_UDP: + fdircmd |= IXGBE_FDIRCMD_L4TYPE_UDP; + break; + case IXGBE_ATR_L4TYPE_SCTP: + fdircmd |= IXGBE_FDIRCMD_L4TYPE_SCTP; + break; + default: + DEBUGOUT(" Error on l4type input\n"); + return IXGBE_ERR_CONFIG; + } + + bucket_hash = ixgbe_atr_compute_hash_82599(input, + IXGBE_ATR_BUCKET_HASH_KEY); + + /* bucket_hash is only 15 bits */ + bucket_hash &= IXGBE_ATR_HASH_MASK; + + ixgbe_atr_get_vlan_id_82599(input, &vlan_id); + ixgbe_atr_get_src_port_82599(input, &src_port); + ixgbe_atr_get_dst_port_82599(input, &dst_port); + ixgbe_atr_get_flex_byte_82599(input, &flex_bytes); + + fdirhash = soft_id << IXGBE_FDIRHASH_SIG_SW_INDEX_SHIFT | bucket_hash; + + /* Now figure out if we're IPv4 or IPv6 */ + if (l4type & IXGBE_ATR_L4TYPE_IPV6_MASK) { + /* IPv6 */ + ixgbe_atr_get_src_ipv6_82599(input, &src_ipv6_1, &src_ipv6_2, + &src_ipv6_3, &src_ipv6_4); + + IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(0), src_ipv6_1); + IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(1), src_ipv6_2); + IXGBE_WRITE_REG(hw, IXGBE_FDIRSIPv6(2), src_ipv6_3); + /* The last 4 bytes is the same register as IPv4 */ + IXGBE_WRITE_REG(hw, IXGBE_FDIRIPSA, src_ipv6_4); + + fdircmd |= IXGBE_FDIRCMD_IPV6; + fdircmd |= IXGBE_FDIRCMD_IPv6DMATCH; + } else { + /* IPv4 */ + ixgbe_atr_get_src_ipv4_82599(input, &src_ipv4); + IXGBE_WRITE_REG(hw, IXGBE_FDIRIPSA, src_ipv4); + + } + + ixgbe_atr_get_dst_ipv4_82599(input, &dst_ipv4); + IXGBE_WRITE_REG(hw, IXGBE_FDIRIPDA, dst_ipv4); + + IXGBE_WRITE_REG(hw, IXGBE_FDIRVLAN, (vlan_id | + (flex_bytes << IXGBE_FDIRVLAN_FLEX_SHIFT))); + IXGBE_WRITE_REG(hw, IXGBE_FDIRPORT, (src_port | + (dst_port << IXGBE_FDIRPORT_DESTINATION_SHIFT))); + + fdircmd |= IXGBE_FDIRCMD_CMD_ADD_FLOW; + fdircmd |= IXGBE_FDIRCMD_FILTER_UPDATE; + fdircmd |= IXGBE_FDIRCMD_LAST; + fdircmd |= IXGBE_FDIRCMD_QUEUE_EN; + fdircmd |= queue << IXGBE_FDIRCMD_RX_QUEUE_SHIFT; + + IXGBE_WRITE_REG(hw, IXGBE_FDIRHASH, fdirhash); + IXGBE_WRITE_REG(hw, IXGBE_FDIRCMD, fdircmd); + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_read_analog_reg8_82599 - Reads 8 bit Omer analog register + * @hw: pointer to hardware structure + * @reg: analog register to read + * @val: read value + * + * Performs read operation to Omer analog register specified. + **/ +s32 ixgbe_read_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 *val) +{ + u32 core_ctl; + + IXGBE_WRITE_REG(hw, IXGBE_CORECTL, IXGBE_CORECTL_WRITE_CMD | + (reg << 8)); + IXGBE_WRITE_FLUSH(hw); + usec_delay(10); + core_ctl = IXGBE_READ_REG(hw, IXGBE_CORECTL); + *val = (u8)core_ctl; + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_write_analog_reg8_82599 - Writes 8 bit Omer analog register + * @hw: pointer to hardware structure + * @reg: atlas register to write + * @val: value to write + * + * Performs write operation to Omer analog register specified. + **/ +s32 ixgbe_write_analog_reg8_82599(struct ixgbe_hw *hw, u32 reg, u8 val) +{ + u32 core_ctl; + + core_ctl = (reg << 8) | val; + IXGBE_WRITE_REG(hw, IXGBE_CORECTL, core_ctl); + IXGBE_WRITE_FLUSH(hw); + usec_delay(10); + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_start_hw_rev_1_82599 - Prepare hardware for Tx/Rx + * @hw: pointer to hardware structure + * + * Starts the hardware using the generic start_hw function. + * Then performs revision-specific operations: + * Clears the rate limiter registers. + **/ +s32 ixgbe_start_hw_rev_1_82599(struct ixgbe_hw *hw) +{ + u32 q_num; + s32 ret_val = IXGBE_SUCCESS; + + ret_val = ixgbe_start_hw_generic(hw); + + /* Clear the rate limiters */ + for (q_num = 0; q_num < hw->mac.max_tx_queues; q_num++) { + IXGBE_WRITE_REG(hw, IXGBE_RTTDQSEL, q_num); + IXGBE_WRITE_REG(hw, IXGBE_RTTBCNRC, 0); + } + IXGBE_WRITE_FLUSH(hw); + + return ret_val; +} + +/** + * ixgbe_identify_phy_82599 - Get physical layer module + * @hw: pointer to hardware structure + * + * Determines the physical layer module found on the current adapter. + * If PHY already detected, maintains current PHY type in hw struct, + * otherwise executes the PHY detection routine. + **/ +s32 ixgbe_identify_phy_82599(struct ixgbe_hw *hw) +{ + s32 status = IXGBE_ERR_PHY_ADDR_INVALID; + + /* Detect PHY if not unknown - returns success if already detected. */ + status = ixgbe_identify_phy_generic(hw); + if (status != IXGBE_SUCCESS) + status = ixgbe_identify_sfp_module_generic(hw); + /* Set PHY type none if no PHY detected */ + if (hw->phy.type == ixgbe_phy_unknown) { + hw->phy.type = ixgbe_phy_none; + status = IXGBE_SUCCESS; + } + + /* Return error if SFP module has been detected but is not supported */ + if (hw->phy.type == ixgbe_phy_sfp_unsupported) + status = IXGBE_ERR_SFP_NOT_SUPPORTED; + + return status; +} + +/** + * ixgbe_get_supported_physical_layer_82599 - Returns physical layer type + * @hw: pointer to hardware structure + * + * Determines physical layer capabilities of the current configuration. + **/ +u32 ixgbe_get_supported_physical_layer_82599(struct ixgbe_hw *hw) +{ + u32 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; + u32 autoc = IXGBE_READ_REG(hw, IXGBE_AUTOC); + u32 autoc2 = IXGBE_READ_REG(hw, IXGBE_AUTOC2); + u32 pma_pmd_10g_serial = autoc2 & IXGBE_AUTOC2_10G_SERIAL_PMA_PMD_MASK; + u32 pma_pmd_10g_parallel = autoc & IXGBE_AUTOC_10G_PMA_PMD_MASK; + u32 pma_pmd_1g = autoc & IXGBE_AUTOC_1G_PMA_PMD_MASK; + u16 ext_ability = 0; + u8 comp_codes_10g = 0; + + hw->phy.ops.identify(hw); + + if (hw->phy.type == ixgbe_phy_tn || + hw->phy.type == ixgbe_phy_aq || + hw->phy.type == ixgbe_phy_cu_unknown) { + hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY, + IXGBE_MDIO_PMA_PMD_DEV_TYPE, &ext_ability); + if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; + if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; + if (ext_ability & IXGBE_MDIO_PHY_100BASETX_ABILITY) + physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; + goto out; + } + + switch (autoc & IXGBE_AUTOC_LMS_MASK) { + case IXGBE_AUTOC_LMS_1G_AN: + case IXGBE_AUTOC_LMS_1G_LINK_NO_AN: + if (pma_pmd_1g == IXGBE_AUTOC_1G_KX_BX) { + physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX | + IXGBE_PHYSICAL_LAYER_1000BASE_BX; + goto out; + } else + /* SFI mode so read SFP module */ + goto sfp_check; + break; + case IXGBE_AUTOC_LMS_10G_LINK_NO_AN: + if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_CX4) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_CX4; + else if (pma_pmd_10g_parallel == IXGBE_AUTOC_10G_KX4) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4; + goto out; + break; + case IXGBE_AUTOC_LMS_10G_SERIAL: + if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_KR) { + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR; + goto out; + } else if (pma_pmd_10g_serial == IXGBE_AUTOC2_10G_SFI) + goto sfp_check; + break; + case IXGBE_AUTOC_LMS_KX4_KX_KR: + case IXGBE_AUTOC_LMS_KX4_KX_KR_1G_AN: + if (autoc & IXGBE_AUTOC_KX_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_KX; + if (autoc & IXGBE_AUTOC_KX4_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KX4; + if (autoc & IXGBE_AUTOC_KR_SUPP) + physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_KR; + goto out; + break; + default: + goto out; + break; + } + +sfp_check: + /* SFP check must be done last since DA modules are sometimes used to + * test KR mode - we need to id KR mode correctly before SFP module. + * Call identify_sfp because the pluggable module may have changed */ + hw->phy.ops.identify_sfp(hw); + if (hw->phy.sfp_type == ixgbe_sfp_type_not_present) + goto out; + + switch (hw->phy.type) { + case ixgbe_phy_tw_tyco: + case ixgbe_phy_tw_unknown: + physical_layer = IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU; + break; + case ixgbe_phy_sfp_avago: + case ixgbe_phy_sfp_ftl: + case ixgbe_phy_sfp_intel: + case ixgbe_phy_sfp_unknown: + hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_10GBE_COMP_CODES, &comp_codes_10g); + if (comp_codes_10g & IXGBE_SFF_10GBASESR_CAPABLE) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_SR; + else if (comp_codes_10g & IXGBE_SFF_10GBASELR_CAPABLE) + physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_LR; + break; + default: + break; + } + +out: + return physical_layer; +} + +/** + * ixgbe_enable_rx_dma_82599 - Enable the Rx DMA unit on 82599 + * @hw: pointer to hardware structure + * @regval: register value to write to RXCTRL + * + * Enables the Rx DMA unit for 82599 + **/ +s32 ixgbe_enable_rx_dma_82599(struct ixgbe_hw *hw, u32 regval) +{ +#define IXGBE_MAX_SECRX_POLL 30 + int i; + int secrxreg; + + /* + * Workaround for 82599 silicon errata when enabling the Rx datapath. + * If traffic is incoming before we enable the Rx unit, it could hang + * the Rx DMA unit. Therefore, make sure the security engine is + * completely disabled prior to enabling the Rx unit. + */ + secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL); + secrxreg |= IXGBE_SECRXCTRL_RX_DIS; + IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg); + for (i = 0; i < IXGBE_MAX_SECRX_POLL; i++) { + secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXSTAT); + if (secrxreg & IXGBE_SECRXSTAT_SECRX_RDY) + break; + else + /* Use interrupt-safe sleep just in case */ + usec_delay(10); + } + + /* For informational purposes only */ + if (i >= IXGBE_MAX_SECRX_POLL) + DEBUGOUT("Rx unit being enabled before security " + "path fully disabled. Continuing with init.\n"); + + IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, regval); + secrxreg = IXGBE_READ_REG(hw, IXGBE_SECRXCTRL); + secrxreg &= ~IXGBE_SECRXCTRL_RX_DIS; + IXGBE_WRITE_REG(hw, IXGBE_SECRXCTRL, secrxreg); + IXGBE_WRITE_FLUSH(hw); + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_get_device_caps_82599 - Get additional device capabilities + * @hw: pointer to hardware structure + * @device_caps: the EEPROM word with the extra device capabilities + * + * This function will read the EEPROM location for the device capabilities, + * and return the word through device_caps. + **/ +s32 ixgbe_get_device_caps_82599(struct ixgbe_hw *hw, u16 *device_caps) +{ + hw->eeprom.ops.read(hw, IXGBE_DEVICE_CAPS, device_caps); + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_get_san_mac_addr_offset_82599 - SAN MAC address offset for 82599 + * @hw: pointer to hardware structure + * @san_mac_offset: SAN MAC address offset + * + * This function will read the EEPROM location for the SAN MAC address + * pointer, and returns the value at that location. This is used in both + * get and set mac_addr routines. + **/ +s32 ixgbe_get_san_mac_addr_offset_82599(struct ixgbe_hw *hw, + u16 *san_mac_offset) +{ + /* + * First read the EEPROM pointer to see if the MAC addresses are + * available. + */ + hw->eeprom.ops.read(hw, IXGBE_SAN_MAC_ADDR_PTR, san_mac_offset); + + return IXGBE_SUCCESS; +} + +/** + * ixgbe_get_san_mac_addr_82599 - SAN MAC address retrieval for 82599 + * @hw: pointer to hardware structure + * @san_mac_addr: SAN MAC address + * + * Reads the SAN MAC address from the EEPROM, if it's available. This is + * per-port, so set_lan_id() must be called before reading the addresses. + * set_lan_id() is called by identify_sfp(), but this cannot be relied + * upon for non-SFP connections, so we must call it here. + **/ +s32 ixgbe_get_san_mac_addr_82599(struct ixgbe_hw *hw, u8 *san_mac_addr) +{ + u16 san_mac_data, san_mac_offset; + u8 i; + + /* + * First read the EEPROM pointer to see if the MAC addresses are + * available. If they're not, no point in calling set_lan_id() here. + */ + ixgbe_get_san_mac_addr_offset_82599(hw, &san_mac_offset); + + if ((san_mac_offset == 0) || (san_mac_offset == 0xFFFF)) { + /* + * No addresses available in this EEPROM. It's not an + * error though, so just wipe the local address and return. + */ + for (i = 0; i < 6; i++) + san_mac_addr[i] = 0xFF; + + goto san_mac_addr_out; + } + + /* make sure we know which port we need to program */ + hw->mac.ops.set_lan_id(hw); + /* apply the port offset to the address offset */ + (hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) : + (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET); + for (i = 0; i < 3; i++) { + hw->eeprom.ops.read(hw, san_mac_offset, &san_mac_data); + san_mac_addr[i * 2] = (u8)(san_mac_data); + san_mac_addr[i * 2 + 1] = (u8)(san_mac_data >> 8); + san_mac_offset++; + } + +san_mac_addr_out: + return IXGBE_SUCCESS; +} + +/** + * ixgbe_set_san_mac_addr_82599 - Write the SAN MAC address to the EEPROM + * @hw: pointer to hardware structure + * @san_mac_addr: SAN MAC address + * + * Write a SAN MAC address to the EEPROM. + **/ +s32 ixgbe_set_san_mac_addr_82599(struct ixgbe_hw *hw, u8 *san_mac_addr) +{ + s32 status = IXGBE_SUCCESS; + u16 san_mac_data, san_mac_offset; + u8 i; + + /* Look for SAN mac address pointer. If not defined, return */ + ixgbe_get_san_mac_addr_offset_82599(hw, &san_mac_offset); + + if ((san_mac_offset == 0) || (san_mac_offset == 0xFFFF)) { + status = IXGBE_ERR_NO_SAN_ADDR_PTR; + goto san_mac_addr_out; + } + + /* Make sure we know which port we need to write */ + hw->mac.ops.set_lan_id(hw); + /* Apply the port offset to the address offset */ + (hw->bus.func) ? (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT1_OFFSET) : + (san_mac_offset += IXGBE_SAN_MAC_ADDR_PORT0_OFFSET); + + for (i = 0; i < 3; i++) { + san_mac_data = (u16)((u16)(san_mac_addr[i * 2 + 1]) << 8); + san_mac_data |= (u16)(san_mac_addr[i * 2]); + hw->eeprom.ops.write(hw, san_mac_offset, san_mac_data); + san_mac_offset++; + } + +san_mac_addr_out: + return status; +} |