summaryrefslogtreecommitdiffstats
path: root/sys/dev/isp
diff options
context:
space:
mode:
authormjacob <mjacob@FreeBSD.org>2007-02-23 21:59:21 +0000
committermjacob <mjacob@FreeBSD.org>2007-02-23 21:59:21 +0000
commit6b3b8d08bd9f40733887a508b11b80500a053bf8 (patch)
treee1dda1ed7cf4788607a78daa769c18e59272fa1e /sys/dev/isp
parenta713b8f23225d137db4442f1da094bfdffb2879a (diff)
downloadFreeBSD-src-6b3b8d08bd9f40733887a508b11b80500a053bf8.zip
FreeBSD-src-6b3b8d08bd9f40733887a508b11b80500a053bf8.tar.gz
Don't attempt to load illegal hard loop addresses into
an ICB. This shows up on card restarts, and usually for 2200-2300 cards. What happens is that we start up, attempting to acquire a hard address. We end up instead being an F-port topology, which reports out a loop id of 0xff (or 0xffff for 2K Login f/w). Then, if we restart, we end up telling the card to go off an acquire this loop address, which the card then rejects. Bah. Compilation fixes from Solaris port.
Diffstat (limited to 'sys/dev/isp')
-rw-r--r--sys/dev/isp/isp.c62
-rw-r--r--sys/dev/isp/ispmbox.h2
-rw-r--r--sys/dev/isp/ispreg.h16
3 files changed, 31 insertions, 49 deletions
diff --git a/sys/dev/isp/isp.c b/sys/dev/isp/isp.c
index 008a534..e504325 100644
--- a/sys/dev/isp/isp.c
+++ b/sys/dev/isp/isp.c
@@ -1555,6 +1555,7 @@ isp_fibre_init(ispsoftc_t *isp)
fcparam *fcp;
isp_icb_t local, *icbp = &local;
mbreg_t mbs;
+ int ownloopid;
uint64_t nwwn, pwwn;
fcp = isp->isp_param;
@@ -1630,25 +1631,17 @@ isp_fibre_init(ispsoftc_t *isp)
icbp->icb_retry_delay = fcp->isp_retry_delay;
icbp->icb_retry_count = fcp->isp_retry_count;
icbp->icb_hardaddr = fcp->isp_loopid;
+ ownloopid = (isp->isp_confopts & ISP_CFG_OWNLOOPID) != 0;
if (icbp->icb_hardaddr > 125) {
- /*
- * We end up with these Loop IDs for F-Port topologies
- */
- if (icbp->icb_hardaddr != 0xff &&
- icbp->icb_hardaddr != 0x800 &&
- icbp->icb_hardaddr != 0xffff) {
- isp_prt(isp, ISP_LOGERR,
- "bad hard address %u- resetting to zero",
- icbp->icb_hardaddr);
- icbp->icb_hardaddr = 0;
- }
+ icbp->icb_hardaddr = 0;
+ ownloopid = 0;
}
/*
* Our life seems so much better with 2200s and later with
* the latest f/w if we set Hard Address.
*/
- if (ISP_FW_NEWER_THAN(isp, 2, 2, 5)) {
+ if (ownloopid || ISP_FW_NEWER_THAN(isp, 2, 2, 5)) {
icbp->icb_fwoptions |= ICBOPT_HARD_ADDRESS;
}
@@ -1800,6 +1793,7 @@ isp_fibre_init(ispsoftc_t *isp)
isp_mboxcmd(isp, &mbs);
FC_SCRATCH_RELEASE(isp);
if (mbs.param[0] != MBOX_COMMAND_COMPLETE) {
+ isp_print_bytes(isp, "isp_fibre_init", sizeof (*icbp), icbp);
return;
}
isp->isp_reqidx = 0;
@@ -1818,6 +1812,7 @@ isp_fibre_init_2400(ispsoftc_t *isp)
fcparam *fcp;
isp_icb_2400_t local, *icbp = &local;
mbreg_t mbs;
+ int ownloopid;
uint64_t nwwn, pwwn;
fcp = isp->isp_param;
@@ -1886,21 +1881,12 @@ isp_fibre_init_2400(ispsoftc_t *isp)
icbp->icb_fwoptions1 = fcp->isp_fwoptions;
icbp->icb_hardaddr = fcp->isp_loopid;
+ ownloopid = (isp->isp_confopts & ISP_CFG_OWNLOOPID) != 0;
if (icbp->icb_hardaddr > 125) {
- /*
- * We end up with these Loop IDs for F-Port topologies
- */
- if (icbp->icb_hardaddr != 0xff &&
- icbp->icb_hardaddr != 0x800 &&
- icbp->icb_hardaddr != 0xffff) {
- isp_prt(isp, ISP_LOGERR,
- "bad hard address %u- resetting to zero",
- icbp->icb_hardaddr);
- icbp->icb_hardaddr = 0;
- }
+ icbp->icb_hardaddr = 0;
+ ownloopid = 0;
}
-
- if (isp->isp_confopts & ISP_CFG_OWNLOOPID) {
+ if (ownloopid) {
icbp->icb_fwoptions1 |= ICB2400_OPT1_HARD_ADDRESS;
}
@@ -2280,7 +2266,6 @@ isp_port_login(ispsoftc_t *isp, uint16_t handle, uint32_t portid)
"isp_plogi_old: portid 0x%06x already logged in as %u",
portid, mbs.param[1]);
return (MBOX_PORT_ID_USED | (mbs.param[1] << 16));
- break;
case MBOX_LOOP_ID_USED:
isp_prt(isp, ISP_LOGDEBUG0,
@@ -2963,19 +2948,17 @@ isp_scan_loop(ispsoftc_t *isp)
/*
* Check to make sure it's still a valid entry. The 24XX seems
* to return a portid but not a WWPN/WWNN or role for devices
- * which shift on a loop, or have a WWPN/WWNN but no portid.
+ * which shift on a loop.
*/
if (tmp.node_wwn == 0 || tmp.port_wwn == 0 || tmp.portid == 0) {
- if (isp->isp_dblev & ISP_LOGSANCFG) {
- int a, b, c;
- a = !(tmp.node_wwn == 0);
- b = !(tmp.port_wwn == 0);
- c = !(tmp.portid == 0);
- isp_prt(isp, ISP_LOGALL,
- "bad pdb (%1d%1d%1d) @ handle 0x%x",
- a, b, c, handle);
- isp_dump_portdb(isp);
- }
+ int a, b, c;
+ a = (tmp.node_wwn == 0);
+ b = (tmp.port_wwn == 0);
+ c = (tmp.portid == 0);
+ isp_prt(isp, ISP_LOGWARN,
+ "bad pdb (%1d%1d%1d) @ handle 0x%x", a, b, c,
+ handle);
+ isp_dump_portdb(isp);
continue;
}
@@ -4576,7 +4559,6 @@ again:
if ((IS_FC(isp) && mbox != ASYNC_RIO_RESP) ||
isp->isp_state != ISP_RUNSTATE) {
goto out;
- return;
}
}
@@ -7523,11 +7505,11 @@ isp_rd_2400_nvram(ispsoftc_t *isp, uint32_t addr, uint32_t *rp)
for (loops = 0; loops < 5000; loops++) {
USEC_DELAY(10);
tmp = ISP_READ(isp, BIU2400_FLASH_ADDR);
- if ((tmp & (1 << 31)) != 0) {
+ if ((tmp & (1U << 31)) != 0) {
break;
}
}
- if (tmp & (1 << 31)) {
+ if (tmp & (1U << 31)) {
tmp = ISP_READ(isp, BIU2400_FLASH_DATA);
*rp = tmp;
} else {
diff --git a/sys/dev/isp/ispmbox.h b/sys/dev/isp/ispmbox.h
index 829d8b6f..f57644d 100644
--- a/sys/dev/isp/ispmbox.h
+++ b/sys/dev/isp/ispmbox.h
@@ -643,7 +643,7 @@ typedef struct {
uint16_t ms_flags;
uint16_t ms_reserved1; /* low 8 bits */
uint16_t ms_time;
- uint16_t ms_cmd_cnt; /* Command DSD count */;
+ uint16_t ms_cmd_cnt; /* Command DSD count */
uint16_t ms_tot_cnt; /* Total DSD Count */
uint8_t ms_type; /* MS type */
uint8_t ms_r_ctl; /* R_CTL */
diff --git a/sys/dev/isp/ispreg.h b/sys/dev/isp/ispreg.h
index 57b5877..25ad07a 100644
--- a/sys/dev/isp/ispreg.h
+++ b/sys/dev/isp/ispreg.h
@@ -409,14 +409,14 @@
/* BIU2400_HCCR definitions */
-#define HCCR_2400_CMD_NOP (0x0 << 28)
-#define HCCR_2400_CMD_RESET (0x1 << 28)
-#define HCCR_2400_CMD_CLEAR_RESET (0x2 << 28)
-#define HCCR_2400_CMD_PAUSE (0x3 << 28)
-#define HCCR_2400_CMD_RELEASE (0x4 << 28)
-#define HCCR_2400_CMD_SET_HOST_INT (0x5 << 28)
-#define HCCR_2400_CMD_CLEAR_HOST_INT (0x6 << 28)
-#define HCCR_2400_CMD_CLEAR_RISC_INT (0xA << 28)
+#define HCCR_2400_CMD_NOP 0x00000000
+#define HCCR_2400_CMD_RESET 0x10000000
+#define HCCR_2400_CMD_CLEAR_RESET 0x20000000
+#define HCCR_2400_CMD_PAUSE 0x30000000
+#define HCCR_2400_CMD_RELEASE 0x40000000
+#define HCCR_2400_CMD_SET_HOST_INT 0x50000000
+#define HCCR_2400_CMD_CLEAR_HOST_INT 0x60000000
+#define HCCR_2400_CMD_CLEAR_RISC_INT 0xA0000000
#define HCCR_2400_RISC_ERR(x) (((x) >> 12) & 0x7) /* RO */
#define HCCR_2400_RISC2HOST_INT (1 << 6) /* RO */
OpenPOWER on IntegriCloud