Delete an unused file which no longer compiles anyway.

Approved by:	mdodd

1 files changed, 0 insertions, 599 deletions

diff --git a/sys/dev/hfa/fore_load.c b/sys/dev/hfa/fore_load.c
deleted file mode 100644
index 77ddaae..0000000
--- a/sys/dev/hfa/fore_load.c
+++ /dev/null
@@ -1,599 +0,0 @@
-/*-
- * ===================================
- * HARP  |  Host ATM Research Platform
- * ===================================
- *
- * This Host ATM Research Platform ("HARP") file (the "Software") is
- * made available by Network Computing Services, Inc. ("NetworkCS")
- * "AS IS".  NetworkCS does not provide maintenance, improvements or
- * support of any kind.
- *
- * NETWORKCS MAKES NO WARRANTIES OR REPRESENTATIONS, EXPRESS OR IMPLIED,
- * INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE, AS TO ANY ELEMENT OF THE
- * SOFTWARE OR ANY SUPPORT PROVIDED IN CONNECTION WITH THIS SOFTWARE.
- * In no event shall NetworkCS be responsible for any damages, including
- * but not limited to consequential damages, arising from or relating to
- * any use of the Software or related support.
- *
- * Copyright 1994-1998 Network Computing Services, Inc.
- *
- * Copies of this Software may be made, however, the above copyright
- * notice must be reproduced on all copies.
- */
-
-#include <sys/cdefs.h>
-__FBSDID("$FreeBSD$");
-
-#ifdef COMPILING_LINT 
-#warning "The fore pci driver is broken and is not compiled with LINT"
-#else 
-
-/*
- * FORE Systems 200-Series Adapter Support
- * ---------------------------------------
- *
- * Loadable kernel module and device identification support
- *
- */
-
-#include <sys/param.h>
-#include <sys/kernel.h>
-#include <sys/systm.h>
-#include <sys/socket.h>
-#include <sys/socketvar.h>
-#include <sys/syslog.h>
-#include <sys/eventhandler.h>
-#include <net/if.h>
-#include <netatm/port.h>
-#include <netatm/queue.h>
-#include <netatm/atm.h>
-#include <netatm/atm_sys.h>
-#include <netatm/atm_sap.h>
-#include <netatm/atm_cm.h>
-#include <netatm/atm_if.h>
-#include <netatm/atm_stack.h>
-#include <netatm/atm_pcb.h>
-#include <netatm/atm_var.h>
-#include <dev/pci/pcireg.h>
-#include <dev/pci/pcivar.h>
-#include <dev/hfa/fore.h>
-#include <dev/hfa/fore_aali.h>
-#include <dev/hfa/fore_slave.h>
-#include <dev/hfa/fore_stats.h>
-#include <dev/hfa/fore_var.h>
-#include <dev/hfa/fore_include.h>
-
-#ifndef lint
-__RCSID("@(#) $FreeBSD$");
-#endif
-
-static int fore_probe(device_t);
-static int fore_attach(device_t);
-static int fore_detach(device_t);
-static int fore_shutdown(device_t);
-
-#ifndef	COMPAT_OLDPCI
-#error	"The fore device requires the old pci compatibility shims"
-#endif
-
-static int	fore_inited = 0;
-
-static	u_long	fore_pci_count = 0;
-
-static device_method_t fore_methods[] = {
-	DEVMETHOD(device_probe,		fore_probe),
-	DEVMETHOD(device_attach,	fore_attach),
-	DEVMETHOD(device_detach,	fore_detach),
-	DEVMETHOD(device_shutdown,	fore_shutdown),
-	{ 0, 0 }
-};
-
-static struct fore_ident fore_ident_table[] = {
-    { 0x0200,		"FORE Systems PCA-200 ATM ForeRunner" },
-    { 0x0210,		"FORE Systems PCA-200PC" },
-    { 0x0250,		"FORE Systems ATM" },
-    { 0x0300,		"FORE Systems PCA-200E" },
-    { 0x0310,		"FORE Systems ATM" },
-    { 0x0400,		"FORE Systems PCA-200HE ATM ForeRunner" },
-    { 0,		NULL },
-};
-
-
-/*
- * Initialize driver processing
- * 
- * This will be called during module loading.  Not much to do here, as
- * we must wait for our identify/attach routines to get called before
- * we know what we're in for.
- *
- * Arguments:
- *	none
- *
- * Returns:
- *	0 	startup was successful 
- *	errno	startup failed - reason indicated
- *
- */
-static int
-fore_start()
-{
-
-	/*
-	 * Verify software version
-	 */
-	if (atm_version != ATM_VERSION) {
-		log(LOG_ERR, "version mismatch: fore=%d.%d kernel=%d.%d\n",
-			ATM_VERS_MAJ(ATM_VERSION), ATM_VERS_MIN(ATM_VERSION),
-			ATM_VERS_MAJ(atm_version), ATM_VERS_MIN(atm_version));
-		return (EINVAL);
-	}
-
-	/*
-	 * Start up watchdog timer
-	 */
-	atm_timeout(&fore_timer, ATM_HZ * FORE_TIME_TICK, fore_timeout);
-	fore_inited = 1;
-	return (0);
-}
-
-
-
-
-/*
- * Device probe routine
- * 
- * Determine if this driver will support the identified device.  If we claim
- * to support the device, our attach routine will (later) be called for the
- * device.
- */
-static int
-fore_probe(device_t dev)
-{
-	struct fore_ident *ident;
-	u_int16_t devid;
-
-	if (pci_get_vendor(dev) == FORE_VENDOR_ID) {
-		devid = pci_get_device(dev);
-		for (ident = fore_ident_table; ident->name != NULL; ident++)
-			if (ident->devid == devid) {
-				device_set_desc(dev, ident->name);
-				return (0);
-			}
-	}
-	return (ENXIO);
-}
-
-/*
- * Device attach routine
- * 
- * Attach a device we've previously claimed to support.  Walk through its
- * register set and map, as required.  Determine what level the device will
- * be interrupting at and then register an interrupt handler for it.  If we
- * succeed, then reset the adapter and initialize the microcode.
- * Last, register the interface with the kernel ATM services.
- *
- * Arguments:
- *	config_id	device's PCI configuration ID
- *	unit		device unit number
- *
- * Returns:
- *	none
- *
- */
-static void
-fore_pci_attach(config_id, unit)
-	pcici_t config_id;
-	int     unit;
-{
-	Fore_unit	*fup;
-	vm_offset_t	va;
-	vm_offset_t	pa;
-	pcidi_t		device_id;
-	long		val;
-	int		err_count = BOOT_LOOPS;
-
-
-	/*
- 	 * Check that unit is not >= FORE_MAX_UNITS
- 	 */
-	
-
-	/*
-	 * Make sure this isn't a duplicate unit
-	 */
-	if (fore_units[unit] != NULL)
-		return;
-
-
-	/*
-	 * Allocate a new unit structure
-	 */
-	fup = (Fore_unit *) atm_dev_alloc(sizeof(Fore_unit), sizeof(int), 0);
-	if (fup == NULL)
-		return;
-
-	/*
-	 * Start initializing it
-	 */
-	fup->fu_unit = unit;
-	fup->fu_mtu = FORE_IFF_MTU;
-	fup->fu_pcitag = config_id;
-	fup->fu_vcc_zone = fore_vcc_zone;
-	fup->fu_nif_zone = &fore_nif_zone;
-	fup->fu_ioctl = fore_atm_ioctl;
-	fup->fu_instvcc = fore_instvcc;
-	fup->fu_openvcc = fore_openvcc;
-	fup->fu_closevcc = fore_closevcc;
-	fup->fu_output = fore_output;
-	callout_handle_init(&fup->fu_thandle);
-
-	/*
-	 * Get our device type
-	 */
-	device_id = pci_conf_read ( config_id, PCI_ID_REG );
-	switch ((device_id >> 16) & 0xffff) {
-
-	case FORE_PCA200E_ID:
-		fup->fu_config.ac_device = DEV_FORE_PCA200E;
-		break;
-
-	default:
-		fup->fu_config.ac_device = DEV_UNKNOWN;
-	}
-
-	/*
-	 * Enable Memory Mapping / Bus Mastering 
-	 */
-	val = pci_conf_read(config_id, PCI_COMMAND_STATUS_REG);
-	val |= (PCIM_CMD_MEMEN | PCIM_CMD_BUSMASTEREN);
-	pci_conf_write(config_id, PCI_COMMAND_STATUS_REG, val);
-
-	/*
-	 * Map RAM
-	 */
-	val = pci_conf_read(config_id, PCI_COMMAND_STATUS_REG);
-	if ((val & PCIM_CMD_MEMEN) == 0) {
-		log(LOG_ERR, "%s%d: memory mapping not enabled\n", 
-			FORE_DEV_NAME, unit);
-		goto failed;
-	}
-	if ((pci_map_mem(config_id, PCA200E_PCI_MEMBASE, &va, &pa)) == 0) {
-		log(LOG_ERR, "%s%d: unable to map memory\n", 
-			FORE_DEV_NAME, unit);
-		goto failed;
-	}
-	fup->fu_ram = (Fore_mem *)va;
-	fup->fu_ramsize = PCA200E_RAM_SIZE;
-	fup->fu_mon = (Mon960 *)(fup->fu_ram + MON960_BASE);
-	fup->fu_ctlreg = (Fore_reg *)(va + PCA200E_HCR_OFFSET);
-	fup->fu_imask = (Fore_reg *)(va + PCA200E_IMASK_OFFSET);
-	fup->fu_psr = (Fore_reg *)(va + PCA200E_PSR_OFFSET);
-
-	/*
-	 * Convert Endianess of Slave RAM accesses
-	 */
-	val = pci_conf_read(config_id, PCA200E_PCI_MCTL);
-	val |= PCA200E_MCTL_SWAP;
-	pci_conf_write(config_id, PCA200E_PCI_MCTL, val);
-
-	/*
-	 * Map interrupt in
-	 */
-	if ( !pci_map_int( config_id, fore_intr, fup, &net_imask ) ) {
-		log(LOG_ERR, "%s%d: unable to map interrupt\n", 
-			FORE_DEV_NAME, unit);
-		goto failed;
-	}
-
-	/*
-	 * Poke the hardware - boot the CP and prepare it for downloading
-	 */
-	fore_reset(fup);
-
-	/*
-	 * Wait for the monitor to perform self-test
-	 */
-	while (CP_READ(fup->fu_mon->mon_bstat) != BOOT_MONREADY) {
-		if (CP_READ(fup->fu_mon->mon_bstat) == BOOT_FAILTEST) {
-			log(LOG_ERR, "%s%d: failed self-test\n", 
-				FORE_DEV_NAME, unit);
-			goto failed;
-		} else if ( --err_count == 0 ) {
-			log(LOG_ERR, "%s%d: unable to boot - status=0x%lx\n", 
-				FORE_DEV_NAME, unit,
-				(u_long)CP_READ(fup->fu_mon->mon_bstat));
-			goto failed;
-		}
-		DELAY ( BOOT_DELAY );
-	}
-
-	/*
-	 * Setup the adapter config info - at least as much as we can
-	 */
-	fup->fu_config.ac_vendor = VENDOR_FORE;
-	fup->fu_config.ac_vendapi = VENDAPI_FORE_1;
-	fup->fu_config.ac_media = MEDIA_OC3C;
-	fup->fu_pif.pif_pcr = ATM_PCR_OC3C;
-	fup->fu_config.ac_bustype = BUS_PCI;
-	fup->fu_config.ac_busslot = config_id->bus << 8 | config_id->slot;
-
-	/*
-	 * Save device ram info for user-level programs
-	 */
-	fup->fu_config.ac_ram = (long)fup->fu_ram;
-	fup->fu_config.ac_ramsize = fup->fu_ramsize;
-
-	/*
-	 * Set device capabilities
-	 */
-	fup->fu_pif.pif_maxvpi = FORE_MAX_VPI;
-	fup->fu_pif.pif_maxvci = FORE_MAX_VCI;
-
-	/*
-	 * Register this interface with ATM core services
-	 */
-        if ( atm_physif_register
-			((Cmn_unit *)fup, FORE_DEV_NAME, fore_services) != 0 )
-	{
-		/*
-		 * Registration failed - back everything out
-		 */
-		goto failed;
-	}
-
-	fore_units[unit] = fup;
-	fore_nunits++;
-
-	/*
-	 * Add hook to our shutdown function
-	 */
-	EVENTHANDLER_REGISTER(shutdown_post_sync, fore_pci_shutdown, fup,
-			      SHUTDOWN_PRI_DEFAULT);
-
-	/*
-	 * Initialize the CP microcode program.
-	 */
-	fore_initialize(fup);
-
-	return;
-
-failed:
-	/*
-	 * Unattach the device from the system
-	 */
-	fore_unattach(fup);
-
-	/*
-	 * Free any Fore-specific device resources
-	 */
-	fore_interface_free(fup);
-
-	atm_dev_free(fup);
-
-	return;
-}
-
-/*
- * Device shutdown routine
- * 
- * Arguments:
- *	howto		type of shutdown
- *	fup		pointer to device unit structure
- *
- * Returns:
- *	none
- *
- */
-static void
-fore_pci_shutdown(fup, howto)
-	void		*fup;
-	int		howto;
-{
-
-	fore_reset((Fore_unit *) fup);
-
-	return;
-}
-
-/*
- * Device unattach routine
- * 
- * Reset the physical device, remove any pending timeouts, 
- * unmap any register sets, and unregister any interrupts.
- *
- * Arguments:
- *	fup		pointer to device unit structure
- *
- * Returns:
- *	none
- */ 
-static void
-fore_unattach(fup)
-	Fore_unit	*fup;
-{
-
-
-	/*
-	 * Reset the board and return it to cold_start state.
-	 * Hopefully, this will prevent use of resources as
-	 * we're trying to free things up.
-	 */
-	fore_reset(fup);
-
-	/*
-	 * Lock out all device interrupts
-	 */
-	DEVICE_LOCK((Cmn_unit *)fup);
-
-	/*
-	 * Remove any pending timeout()'s
-	 */
-	(void)untimeout((KTimeout_ret(*)(void *))fore_initialize,
-		(void *)fup, fup->fu_thandle);
-
-
-	/*
-	 * Unmap the device interrupt
-	 */
-	(void) pci_unmap_int(fup->fu_pcitag);
-
-	/*
-	 * Unmap memory
-	 */
-#ifdef notdef
-	(void) pci_unmap_mem(fup->fu_pcitag, PCA200E_PCI_MEMBASE);
-#endif
-
-	DEVICE_UNLOCK((Cmn_unit *)fup);
-}
-
-
-/*
- * Device reset routine
- * 
- * Reset the physical device
- *
- * Arguments:
- *	fup		pointer to device unit structure
- *
- * Returns:
- *	none
- */ 
-static void
-fore_reset(fup)
-	Fore_unit	*fup;
-{
-	int	s = splimp();
-
-	/*
-	 * Reset the board and return it to cold_start state
-	 */
-	if (fup->fu_mon)
-		fup->fu_mon->mon_bstat = CP_WRITE(BOOT_COLDSTART);
-
-	if (fup->fu_ctlreg) {
-
-		if (fup->fu_config.ac_device == DEV_FORE_PCA200E) {
-			/*
-			 * Reset i960 by setting and clearing RESET
-			 */
-			PCA200E_HCR_INIT(*fup->fu_ctlreg, PCA200E_RESET);
-			DELAY(10000);
-			PCA200E_HCR_CLR(*fup->fu_ctlreg, PCA200E_RESET);
-		 }
-	}
-
-	(void) splx(s);
-	return;
-}
-
-
-#ifndef ATM_LINKED
-/*
- *******************************************************************
- *
- * Loadable Module Support
- *
- *******************************************************************
- */
-
-
-#ifdef notdef
-
-/*
- * Driver entry points
- */
-static struct cdevsw fore_cdev = {
-	.d_version =	D_VERSION,
-	.d_flags =	D_NEEDGIANT,
-	.d_maj =	-1,
-};
-
-
-/*
- * Loadable device driver module description
- */
-MOD_DEV(fore, LM_DT_CHAR, -1, (void *)&fore_cdev);
-
-
-/*
- * Loadable module support "load" entry point
- * 
- * This is the routine called by the lkm driver whenever the
- * modload(1) command is issued for this module.
- *
- * Arguments:
- *	lkmtp	pointer to lkm drivers's structure
- *	cmd	lkm command code
- *
- * Returns:
- *	0 	command was successful 
- *	errno	command failed - reason indicated
- *
- */
-static int
-fore_load(lkmtp, cmd)
-	struct lkm_table	*lkmtp;
-	int		cmd;
-{
-	return(fore_doload());
-}
-
-
-/*
- * Loadable module support "unload" entry point
- * 
- * This is the routine called by the lkm driver whenever the
- * modunload(1) command is issued for this module.
- *
- * Arguments:
- *	lkmtp	pointer to lkm drivers's structure
- *	cmd	lkm command code
- *
- * Returns:
- *	0 	command was successful 
- *	errno	command failed - reason indicated
- *
- */
-static int
-fore_unload(lkmtp, cmd)
-	struct lkm_table	*lkmtp;
-	int		cmd;
-{
-	return(fore_dounload());
-}
-
-
-/*
- * Loadable module support entry point
- * 
- * This is the routine called by the lkm driver for all loadable module
- * functions for this driver.  This routine name must be specified
- * on the modload(1) command.  This routine will be called whenever the
- * modload(1), modunload(1) or modstat(1) commands are issued for this
- * module.
- *
- * Arguments:
- *	lkmtp	pointer to lkm drivers's structure
- *	cmd	lkm command code
- *	ver	lkm version
- *
- * Returns:
- *	0 	command was successful 
- *	errno	command failed - reason indicated
- *
- */
-int
-fore_mod(lkmtp, cmd, ver)
-	struct lkm_table	*lkmtp;
-	int		cmd;
-	int		ver;
-{
-	DISPATCH(lkmtp, cmd, ver, fore_load, fore_unload, lkm_nullcmd);
-}
-#endif	/* notdef */
-
-#endif	/* ATM_LINKED */
-
-#endif