Split out the ISA bus front end code into its own file. PCCARD attachment

coming later this week.  Mitsuru IWASAKI provided a patch to -mobile which
I used to make sure I was doing the right thing but only a small part of
the actual patch was used.

4 files changed, 472 insertions, 297 deletions

diff --git a/sys/dev/ex/if_ex.c b/sys/dev/ex/if_ex.c
index 28f888a..166e01a 100644
--- a/sys/dev/ex/if_ex.c
+++ b/sys/dev/ex/if_ex.c
@@ -69,6 +69,7 @@
 #include <isa/pnpvar.h>
 
 #include <dev/ex/if_exreg.h>
+#include <dev/ex/if_exvar.h>
 
 #ifdef EXDEBUG
 # define Start_End 1
@@ -82,59 +83,16 @@ static int exintr_count = 0;
 # define DODEBUG(level, action)
 #endif
 
-#define CARD_TYPE_EX_10		1
-#define CARD_TYPE_EX_10_PLUS	2	
-
-struct ex_softc {
-  	struct arpcom	arpcom;		/* Ethernet common data */
-	struct ifmedia	ifmedia;
-
-	device_t	dev;
-	struct resource *ioport;
-	struct resource *irq;
-
-	u_int		iobase;		/* I/O base address. */
-	u_short		irq_no;		/* IRQ number. */
-
-	char *		irq2ee;		/* irq <-> internal		*/
-	u_char *	ee2irq;		/* representation conversion	*/
-
-	u_int		mem_size;	/* Total memory size, in bytes. */
-	u_int		rx_mem_size;	/* Rx memory size (by default,	*/
-					/* first 3/4 of total memory).	*/
-
-	u_int		rx_lower_limit;	/* Lower and upper limits of	*/
-	u_int		rx_upper_limit;	/* receive buffer.		*/
-
-	u_int		rx_head;	/* Head of receive ring buffer. */
-	u_int		tx_mem_size;	/* Tx memory size (by default,	*/
-					/* last quarter of total memory).*/
-
-	u_int		tx_lower_limit;	/* Lower and upper limits of	*/
-	u_int		tx_upper_limit;	/* transmit buffer.		*/
-
-	u_int		tx_head;	/* Head and tail of 		*/
-	u_int		tx_tail;	/* transmit ring buffer.	*/
-
-	u_int		tx_last;	/* Pointer to beginning of last	*/
-					/* frame in the chain.		*/
-};
-
-static char irq2eemap[] =
+char irq2eemap[] =
 	{ -1, -1, 0, 1, -1, 2, -1, -1, -1, 0, 3, 4, -1, -1, -1, -1 };
-static u_char ee2irqmap[] =
+u_char ee2irqmap[] =
 	{ 9, 3, 5, 10, 11, 0, 0, 0 };
-
-static char plus_irq2eemap[] =
+                
+char plus_irq2eemap[] =
 	{ -1, -1, -1, 0, 1, 2, -1, 3, -1, 4, 5, 6, 7, -1, -1, -1 };
-static u_char plus_ee2irqmap[] =
+u_char plus_ee2irqmap[] =
 	{ 3, 4, 5, 7, 9, 10, 11, 12 };
 
-/* Bus Front End Functions */
-static void	ex_isa_identify	__P((driver_t *, device_t));
-static int	ex_isa_probe	__P((device_t));
-static int	ex_isa_attach	__P((device_t));
-
 /* Network Interface Functions */
 static void	ex_init		__P((void *));
 static void	ex_start	__P((struct ifnet *));
@@ -145,42 +103,16 @@ static void	ex_watchdog	__P((struct ifnet *));
 static int	ex_ifmedia_upd	__P((struct ifnet *));
 static void	ex_ifmedia_sts	__P((struct ifnet *, struct ifmediareq *));
 
+static int	ex_get_media	__P((u_int32_t iobase));
+
 static void	ex_stop		__P((struct ex_softc *));
 static void	ex_reset	__P((struct ex_softc *));
 
-static driver_intr_t	ex_intr;
 static void	ex_tx_intr	__P((struct ex_softc *));
 static void	ex_rx_intr	__P((struct ex_softc *));
 
-static u_short	eeprom_read	__P((int, int));
-
-static device_method_t ex_methods[] = {
-	/* Device interface */
-	DEVMETHOD(device_identify,	ex_isa_identify),
-	DEVMETHOD(device_probe,		ex_isa_probe),
-	DEVMETHOD(device_attach,	ex_isa_attach),
-
-	{ 0, 0 }
-};
-
-static driver_t ex_driver = {
-	"ex",
-	ex_methods,
-	sizeof(struct ex_softc),
-};
-
-static devclass_t ex_devclass;
-
-DRIVER_MODULE(ex, isa, ex_driver, ex_devclass, 0, 0);
-
-static struct isa_pnp_id ex_ids[] = {
-	{ 0x3110d425,	NULL },	/* INT1031 */
-	{ 0x3010d425,	NULL },	/* INT1030 */
-	{ 0,		NULL },
-};
-
-static int
-look_for_card (u_int iobase)
+int
+look_for_card (u_int32_t iobase)
 {
 	int count1, count2;
 
@@ -197,24 +129,7 @@ look_for_card (u_int iobase)
 	return((count2 & Counter_bits) == ((count1 + 0xc0) & Counter_bits));
 }
 
-static int
-ex_get_media (u_int32_t iobase)
-{
-	int	tmp;
-
-	outb(iobase + CMD_REG, Bank2_Sel);
-	tmp = inb(iobase + REG3);
-	outb(iobase + CMD_REG, Bank0_Sel);
-
-	if (tmp & TPE_bit)
-		return(IFM_ETHER|IFM_10_T);
-	if (tmp & BNC_bit)
-		return(IFM_ETHER|IFM_10_2);
-
-	return (IFM_ETHER|IFM_10_5);
-}
-
-static void
+void
 ex_get_address (u_int32_t iobase, u_char *enaddr)
 {
 	u_int16_t	eaddr_tmp;
@@ -232,7 +147,7 @@ ex_get_address (u_int32_t iobase, u_char *enaddr)
 	return;
 }
 
-static int
+int
 ex_card_type (u_char *enaddr)
 {
 	if ((enaddr[0] == 0x00) && (enaddr[1] == 0xA0) && (enaddr[2] == 0xC9))
@@ -242,207 +157,70 @@ ex_card_type (u_char *enaddr)
 }
 
 /*
- * Non-destructive identify.
+ * Caller is responsible for eventually calling
+ * ex_release_resources() on failure.
  */
-static void
-ex_isa_identify (driver_t *driver, device_t parent)
+int
+ex_alloc_resources (device_t dev)
 {
-	device_t	child;
-	u_int32_t	ioport;
-	u_char 		enaddr[6];
-	u_int		irq;
-	int		tmp;
-	const char *	desc;
-
-	if (bootverbose)
-		printf("ex_isa_identify()\n");
-
-	for (ioport = 0x200; ioport < 0x3a0; ioport += 0x10) {
-
-		/* No board found at address */
-		if (!look_for_card(ioport)) {
-			continue;
-		}
-
-		if (bootverbose)
-			printf("ex: Found card at 0x%03x!\n", ioport);
-
-		/* Board in PnP mode */
-		if (eeprom_read(ioport, EE_W0) & EE_W0_PNP) {
-			/* Reset the card. */
-			outb(ioport + CMD_REG, Reset_CMD);
-			DELAY(500);
-			if (bootverbose)
-				printf("ex: card at 0x%03x in PnP mode!\n", ioport);
-			continue;
-		}
-
-		bzero(enaddr, sizeof(enaddr));
-
-		/* Reset the card. */
-		outb(ioport + CMD_REG, Reset_CMD);
-		DELAY(400);
-
-		ex_get_address(ioport, enaddr);
-		tmp = eeprom_read(ioport, EE_W1) & EE_W1_INT_SEL;
+	struct ex_softc *	sc = device_get_softc(dev);
+	int			error = 0;
 
-		/* work out which set of irq <-> internal tables to use */
-		if (ex_card_type(enaddr) == CARD_TYPE_EX_10_PLUS) {
-			irq  = plus_ee2irqmap[tmp];
-			desc = "Intel Pro/10+";
-		} else {
-			irq = ee2irqmap[tmp];
-			desc = "Intel Pro/10";
-		}
+	sc->ioport = bus_alloc_resource(dev, SYS_RES_IOPORT, &sc->ioport_rid,
+					0, ~0, 1, RF_ACTIVE);
+	if (!sc->ioport) {
+		device_printf(dev, "No I/O space?!\n");
+		error = ENOMEM;
+		goto bad;
+	}
 
-		child = BUS_ADD_CHILD(parent, ISA_ORDER_SPECULATIVE, "ex", -1);
-		device_set_desc_copy(child, desc);
-		device_set_driver(child, driver);
-		bus_set_resource(child, SYS_RES_IRQ, 0, irq, 1);
-		bus_set_resource(child, SYS_RES_IOPORT, 0, ioport, EX_IOSIZE);
+	sc->irq = bus_alloc_resource(dev, SYS_RES_IRQ, &sc->irq_rid,
+					0, ~0, 1, RF_ACTIVE);
 
-		if (bootverbose)
-			printf("ex: Adding board at 0x%03x, irq %d\n", ioport, irq);
+	if (!sc->irq) {
+		device_printf(dev, "No IRQ?!\n");
+		error = ENOMEM;
+		goto bad;
 	}
 
-	return;
+bad:
+	return (error);
 }
 
-static int
-ex_isa_probe(device_t dev)
+void
+ex_release_resources (device_t dev)
 {
-	u_int		iobase;
-	u_int		irq;
-	char *		irq2ee;
-	u_char *	ee2irq;
-	u_char 		enaddr[6];
-	int		tmp;
-	int		error;
-
-	DODEBUG(Start_End, printf("ex_probe: start\n"););
-
-	/* Check isapnp ids */
-	error = ISA_PNP_PROBE(device_get_parent(dev), dev, ex_ids);
-
-	/* If the card had a PnP ID that didn't match any we know about */
-	if (error == ENXIO) {
-		return(error);
-	}
-
-	/* If we had some other problem. */
-	if (!(error == 0 || error == ENOENT)) {
-		return(error);
-	}
-
-	iobase = bus_get_resource_start(dev, SYS_RES_IOPORT, 0);
-	if (!iobase) {
-		printf("ex: no iobase?\n");
-		return(ENXIO);
-	}
-
-	if (!look_for_card(iobase)) {
-		printf("ex: no card found at 0x%03x\n", iobase);
-		return(ENXIO);
-	}
-
-	if (bootverbose)
-		printf("ex: ex_isa_probe() found card at 0x%03x\n", iobase);
-
-	/*
-	 * Reset the card.
-	 */
-	outb(iobase + CMD_REG, Reset_CMD);
-	DELAY(800);
-
-	ex_get_address(iobase, enaddr);
+	struct ex_softc *	sc = device_get_softc(dev);
 
-	/* work out which set of irq <-> internal tables to use */
-	if (ex_card_type(enaddr) == CARD_TYPE_EX_10_PLUS) {
-		irq2ee = plus_irq2eemap;
-		ee2irq = plus_ee2irqmap;
-	} else {
-		irq2ee = irq2eemap;
-		ee2irq = ee2irqmap;
+	if (sc->ih) {
+		bus_teardown_intr(dev, sc->irq, sc->ih);
+		sc->ih = NULL;
 	}
 
-	tmp = eeprom_read(iobase, EE_W1) & EE_W1_INT_SEL;
-	irq = bus_get_resource_start(dev, SYS_RES_IRQ, 0);
-
-	if (irq > 0) {
-		/* This will happen if board is in PnP mode. */
-		if (ee2irq[tmp] != irq) {
-			printf("ex: WARNING: board's EEPROM is configured"
-				" for IRQ %d, using %d\n",
-				ee2irq[tmp], irq);
-		}
-	} else {
-		irq = ee2irq[tmp];
-		bus_set_resource(dev, SYS_RES_IRQ, 0, irq, 1);
+	if (sc->ioport) {
+		bus_release_resource(dev, SYS_RES_IOPORT,
+					sc->ioport_rid, sc->ioport);
+		sc->ioport = NULL;
 	}
 
-	if (irq == 0) {
-		printf("ex: invalid IRQ.\n");
-		return(ENXIO);
+	if (sc->irq) {
+		bus_release_resource(dev, SYS_RES_IRQ,
+					sc->irq_rid, sc->irq);
+		sc->irq = NULL;
 	}
 
-	DODEBUG(Start_End, printf("ex_probe: finish\n"););
-
-	return(0);
+	return;
 }
 
-static int
-ex_isa_attach(device_t dev)
+int
+ex_attach(device_t dev)
 {
 	struct ex_softc *	sc = device_get_softc(dev);
 	struct ifnet *		ifp = &sc->arpcom.ac_if;
 	struct ifmedia *	ifm;
 	int			unit = device_get_unit(dev);
-	int			error;
-	int			rid;
-	void *			ih;
 	u_int16_t		temp;
 
-	DODEBUG(Start_End, device_printf(dev, "start\n"););
-
-	rid = 0;
-	sc->ioport  = bus_alloc_resource(dev, SYS_RES_IOPORT, &rid,
-					 0, ~0, 1, RF_ACTIVE);
-
-	if (!sc->ioport) {
-		device_printf(dev, "No I/O space?!\n");
-		goto bad;
-	}
-
-	rid = 0;
-	sc->irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid,
-				     0, ~0, 1, RF_ACTIVE);
-
-	if (!sc->irq) {
-		device_printf(dev, "No IRQ?!\n");
-		goto bad;
-	}
-
-	error = bus_setup_intr(dev, sc->irq, INTR_TYPE_NET,
-			       ex_intr, (void *)sc, &ih);
-
-	if (error) {
-		device_printf(dev, "bus_setup_intr() failed!\n");
-		goto bad;
-	}
-
-	/*
-	 * Fill in several fields of the softc structure:
-	 *	- I/O base address.
-	 *	- Hardware Ethernet address.
-	 *	- IRQ number (if not supplied in config file, read it from EEPROM).
-	 *	- Connector type.
-	 */
-	sc->dev = dev;
-	sc->iobase = rman_get_start(sc->ioport);
-	sc->irq_no = rman_get_start(sc->irq);
-
-	ex_get_address(sc->iobase, sc->arpcom.ac_enaddr);
-
 	/* work out which set of irq <-> internal tables to use */
 	if (ex_card_type(sc->arpcom.ac_enaddr) == CARD_TYPE_EX_10_PLUS) {
 		sc->irq2ee = plus_irq2eemap;
@@ -491,36 +269,16 @@ ex_isa_attach(device_t dev)
 	if_attach(ifp);
 	ether_ifattach(ifp);
 
-	temp = eeprom_read(sc->iobase, EE_W0);
-	device_printf(sc->dev, "%s config, %s bus, ",
-		(temp & EE_W0_PNP) ? "PnP" : "Manual",
-		(temp & EE_W0_BUS16) ? "16-bit" : "8-bit");
-
-	temp = eeprom_read(sc->iobase, EE_W6);
-	printf("board id 0x%03x, stepping 0x%01x\n",
-			(temp & EE_W6_BOARD_MASK) >> EE_W6_BOARD_SHIFT,
-			temp & EE_W6_STEP_MASK);
-
 	device_printf(sc->dev, "Ethernet address %6D\n",
 			sc->arpcom.ac_enaddr, ":");
 	/*
 	 * If BPF is in the kernel, call the attach for it
 	 */
 	bpfattach(ifp, DLT_EN10MB, sizeof(struct ether_header));
-	DODEBUG(Start_End, printf("ex_isa_attach%d: finish\n", unit););
 
 	return(0);
-bad:
-
-	if (sc->ioport)
-		bus_release_resource(dev, SYS_RES_IOPORT, 0, sc->ioport);
-	if (sc->irq)
-		bus_release_resource(dev, SYS_RES_IRQ, 0, sc->irq);
-
-	return (-1);
 }
 
-
 static void
 ex_init(void *xsc)
 {
@@ -537,7 +295,7 @@ ex_init(void *xsc)
 		return;
 	}
 	s = splimp();
-	sc->arpcom.ac_if.if_timer = 0;
+	ifp->if_timer = 0;
 
 	/*
 	 * Load the ethernet address into the card.
@@ -822,8 +580,7 @@ ex_stop(struct ex_softc *sc)
 	return;
 }
 
-
-static void
+void
 ex_intr(void *arg)
 {
 	struct ex_softc *	sc = (struct ex_softc *)arg;
@@ -1144,6 +901,23 @@ ex_watchdog(struct ifnet *ifp)
 }
 
 static int
+ex_get_media (u_int32_t iobase)
+{
+	int	tmp;
+
+	outb(iobase + CMD_REG, Bank2_Sel);
+	tmp = inb(iobase + REG3);
+	outb(iobase + CMD_REG, Bank0_Sel);
+
+	if (tmp & TPE_bit)
+		return(IFM_ETHER|IFM_10_T);
+	if (tmp & BNC_bit)
+		return(IFM_ETHER|IFM_10_2);
+
+	return (IFM_ETHER|IFM_10_5);
+}
+
+static int
 ex_ifmedia_upd (ifp)
 	struct ifnet *		ifp;
 {
@@ -1164,8 +938,8 @@ ex_ifmedia_sts(ifp, ifmr)
 	return;
 }
 
-static u_short
-eeprom_read(int iobase, int location)
+u_short
+eeprom_read(u_int32_t iobase, int location)
 {
 	int i;
 	u_short data = 0;
diff --git a/sys/dev/ex/if_ex_isa.c b/sys/dev/ex/if_ex_isa.c
new file mode 100644
index 0000000..d6603b2
--- /dev/null
+++ b/sys/dev/ex/if_ex_isa.c
@@ -0,0 +1,313 @@
+/*-
+ * Copyright (c) 2000 Matthew N. Dodd
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *	$FreeBSD$
+ */
+
+#include <sys/param.h>
+#include <sys/systm.h>
+#include <sys/kernel.h>
+#include <sys/socket.h>
+
+#include <sys/module.h>
+#include <sys/bus.h>
+
+#include <machine/bus.h>
+#include <machine/resource.h>
+#include <sys/rman.h>
+
+#include <net/if.h>
+#include <net/if_arp.h>
+#include <net/if_media.h> 
+
+#include <machine/clock.h>
+
+#include <isa/isavar.h>
+#include <isa/pnpvar.h>
+
+#include <dev/ex/if_exreg.h>
+#include <dev/ex/if_exvar.h>
+
+/* Bus Front End Functions */
+static void	ex_isa_identify	__P((driver_t *, device_t));
+static int	ex_isa_probe	__P((device_t));
+static int	ex_isa_attach	__P((device_t));
+
+#if 0
+static	void	ex_pnp_wakeup	(void *);
+
+SYSINIT(ex_pnpwakeup, SI_SUB_CPU, SI_ORDER_ANY, ex_pnp_wakeup, NULL);
+#endif
+
+static device_method_t ex_methods[] = {
+	/* Device interface */
+	DEVMETHOD(device_identify,	ex_isa_identify),
+	DEVMETHOD(device_probe,		ex_isa_probe),
+	DEVMETHOD(device_attach,	ex_isa_attach),
+
+	{ 0, 0 }
+};
+
+static driver_t ex_driver = {
+	"ex",
+	ex_methods,
+	sizeof(struct ex_softc),
+};
+
+static devclass_t ex_devclass;
+
+DRIVER_MODULE(ex, isa, ex_driver, ex_devclass, 0, 0);
+
+static struct isa_pnp_id ex_ids[] = {
+	{ 0x3110d425,	NULL },	/* INT1031 */
+	{ 0x3010d425,	NULL },	/* INT1030 */
+	{ 0,		NULL },
+};
+
+#if 0
+#define EX_PNP_WAKE		0x279
+
+static u_int8_t ex_pnp_wake_seq[] =
+			{ 0x6A, 0xB5, 0xDA, 0xED, 0xF6, 0xFB, 0x7D, 0xBE,
+			  0xDF, 0x6F, 0x37, 0x1B, 0x0D, 0x86, 0xC3, 0x61,
+			  0xB0, 0x58, 0x2C, 0x16, 0x8B, 0x45, 0xA2, 0xD1,
+			  0xE8, 0x74, 0x3A, 0x9D, 0xCE, 0xE7, 0x73, 0x43 };
+
+static void
+ex_pnp_wakeup (void * dummy)
+{
+	int	tmp;
+
+	if (bootverbose)
+		printf("ex_pnp_wakeup()\n");
+
+	outb(EX_PNP_WAKE, 0);
+	outb(EX_PNP_WAKE, 0);
+	for (tmp = 0; tmp < 32; tmp++) {
+		outb(EX_PNP_WAKE, ex_pnp_wake_seq[tmp]);
+	}
+}
+#endif
+
+/*
+ * Non-destructive identify.
+ */
+static void
+ex_isa_identify (driver_t *driver, device_t parent)
+{
+	device_t	child;
+	u_int32_t	ioport;
+	u_char 		enaddr[6];
+	u_int		irq;
+	int		tmp;
+	const char *	desc;
+
+	if (bootverbose)
+		printf("ex_isa_identify()\n");
+
+	for (ioport = 0x200; ioport < 0x3a0; ioport += 0x10) {
+
+		/* No board found at address */
+		if (!look_for_card(ioport)) {
+			continue;
+		}
+
+		if (bootverbose)
+			printf("ex: Found card at 0x%03x!\n", ioport);
+
+		/* Board in PnP mode */
+		if (eeprom_read(ioport, EE_W0) & EE_W0_PNP) {
+			/* Reset the card. */
+			outb(ioport + CMD_REG, Reset_CMD);
+			DELAY(500);
+			if (bootverbose)
+				printf("ex: card at 0x%03x in PnP mode!\n", ioport);
+			continue;
+		}
+
+		bzero(enaddr, sizeof(enaddr));
+
+		/* Reset the card. */
+		outb(ioport + CMD_REG, Reset_CMD);
+		DELAY(400);
+
+		ex_get_address(ioport, enaddr);
+		tmp = eeprom_read(ioport, EE_W1) & EE_W1_INT_SEL;
+
+		/* work out which set of irq <-> internal tables to use */
+		if (ex_card_type(enaddr) == CARD_TYPE_EX_10_PLUS) {
+			irq  = plus_ee2irqmap[tmp];
+			desc = "Intel Pro/10+";
+		} else {
+			irq = ee2irqmap[tmp];
+			desc = "Intel Pro/10";
+		}
+
+		child = BUS_ADD_CHILD(parent, ISA_ORDER_SPECULATIVE, "ex", -1);
+		device_set_desc_copy(child, desc);
+		device_set_driver(child, driver);
+		bus_set_resource(child, SYS_RES_IRQ, 0, irq, 1);
+		bus_set_resource(child, SYS_RES_IOPORT, 0, ioport, EX_IOSIZE);
+
+		if (bootverbose)
+			printf("ex: Adding board at 0x%03x, irq %d\n", ioport, irq);
+	}
+
+	return;
+}
+
+static int
+ex_isa_probe(device_t dev)
+{
+	u_int		iobase;
+	u_int		irq;
+	char *		irq2ee;
+	u_char *	ee2irq;
+	u_char 		enaddr[6];
+	int		tmp;
+	int		error;
+
+	/* Check isapnp ids */
+	error = ISA_PNP_PROBE(device_get_parent(dev), dev, ex_ids);
+
+	/* If the card had a PnP ID that didn't match any we know about */
+	if (error == ENXIO) {
+		return(error);
+	}
+
+	/* If we had some other problem. */
+	if (!(error == 0 || error == ENOENT)) {
+		return(error);
+	}
+
+	iobase = bus_get_resource_start(dev, SYS_RES_IOPORT, 0);
+	if (!iobase) {
+		printf("ex: no iobase?\n");
+		return(ENXIO);
+	}
+
+	if (!look_for_card(iobase)) {
+		printf("ex: no card found at 0x%03x\n", iobase);
+		return(ENXIO);
+	}
+
+	if (bootverbose)
+		printf("ex: ex_isa_probe() found card at 0x%03x\n", iobase);
+
+	/*
+	 * Reset the card.
+	 */
+	outb(iobase + CMD_REG, Reset_CMD);
+	DELAY(800);
+
+	ex_get_address(iobase, enaddr);
+
+	/* work out which set of irq <-> internal tables to use */
+	if (ex_card_type(enaddr) == CARD_TYPE_EX_10_PLUS) {
+		irq2ee = plus_irq2eemap;
+		ee2irq = plus_ee2irqmap;
+	} else {
+		irq2ee = irq2eemap;
+		ee2irq = ee2irqmap;
+	}
+
+	tmp = eeprom_read(iobase, EE_W1) & EE_W1_INT_SEL;
+	irq = bus_get_resource_start(dev, SYS_RES_IRQ, 0);
+
+	if (irq > 0) {
+		/* This will happen if board is in PnP mode. */
+		if (ee2irq[tmp] != irq) {
+			printf("ex: WARNING: board's EEPROM is configured"
+				" for IRQ %d, using %d\n",
+				ee2irq[tmp], irq);
+		}
+	} else {
+		irq = ee2irq[tmp];
+		bus_set_resource(dev, SYS_RES_IRQ, 0, irq, 1);
+	}
+
+	if (irq == 0) {
+		printf("ex: invalid IRQ.\n");
+		return(ENXIO);
+	}
+
+	return(0);
+}
+
+static int
+ex_isa_attach(device_t dev)
+{
+	struct ex_softc *	sc = device_get_softc(dev);
+	int			error = 0;
+	u_int16_t		temp;
+
+	sc->dev = dev;
+	sc->ioport_rid = 0;
+	sc->irq_rid = 0;
+
+	if ((error = ex_alloc_resources(dev)) != 0) {
+		device_printf(dev, "ex_alloc_resources() failed!\n");
+		goto bad;
+	}
+
+	/*
+	 * Fill in several fields of the softc structure:
+	 *	- I/O base address.
+	 *	- Hardware Ethernet address.
+	 *	- IRQ number (if not supplied in config file, read it from EEPROM).
+	 *	- Connector type.
+	 */
+	sc->iobase = rman_get_start(sc->ioport);
+	sc->irq_no = rman_get_start(sc->irq);
+
+	ex_get_address(sc->iobase, sc->arpcom.ac_enaddr);
+
+	temp = eeprom_read(sc->iobase, EE_W0);
+	device_printf(sc->dev, "%s config, %s bus, ",
+		(temp & EE_W0_PNP) ? "PnP" : "Manual",
+		(temp & EE_W0_BUS16) ? "16-bit" : "8-bit");
+
+	temp = eeprom_read(sc->iobase, EE_W6);
+	printf("board id 0x%03x, stepping 0x%01x\n",
+		(temp & EE_W6_BOARD_MASK) >> EE_W6_BOARD_SHIFT,
+		temp & EE_W6_STEP_MASK);
+
+	if ((error = ex_attach(dev)) != 0) {
+		device_printf(dev, "ex_attach() failed!\n");
+		goto bad;
+	}
+
+	error = bus_setup_intr(dev, sc->irq, INTR_TYPE_NET,
+				ex_intr, (void *)sc, &sc->ih);
+	if (error) {
+		device_printf(dev, "bus_setup_intr() failed!\n");
+		goto bad;
+	}
+
+	return(0);
+bad:
+	ex_release_resources(dev);
+	return (error);
+}
diff --git a/sys/dev/ex/if_exreg.h b/sys/dev/ex/if_exreg.h
index 1b0f7eb..a6c957c 100644
--- a/sys/dev/ex/if_exreg.h
+++ b/sys/dev/ex/if_exreg.h
@@ -35,6 +35,9 @@
  * Several constants.
  */
 
+#define CARD_TYPE_EX_10         1
+#define CARD_TYPE_EX_10_PLUS    2
+
 /* Length of an ethernet address. */
 #define ETHER_ADDR_LEN 6
 /* Default RAM size in board. */
diff --git a/sys/dev/ex/if_exvar.h b/sys/dev/ex/if_exvar.h
new file mode 100644
index 0000000..f8c793a
--- /dev/null
+++ b/sys/dev/ex/if_exvar.h
@@ -0,0 +1,85 @@
+/*-
+ * Copyright (c) 1996, Javier Mart^mn Rueda (jmrueda@diatel.upm.es)
+ * All rights reserved.
+ *
+ * Copyright (c) 2000 Matthew N. Dodd
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *	$FreeBSD$
+ */
+
+struct ex_softc {
+  	struct arpcom	arpcom;		/* Ethernet common data */
+	struct ifmedia	ifmedia;
+
+	device_t	dev;
+	struct resource *ioport;
+	int		ioport_rid;
+	struct resource *irq;
+	int		irq_rid;
+	void *		ih;
+
+	u_int		iobase;		/* I/O base address. */
+	u_short		irq_no;		/* IRQ number. */
+
+	char *		irq2ee;		/* irq <-> internal		*/
+	u_char *	ee2irq;		/* representation conversion	*/
+
+	u_int		mem_size;	/* Total memory size, in bytes. */
+	u_int		rx_mem_size;	/* Rx memory size (by default,	*/
+					/* first 3/4 of total memory).	*/
+
+	u_int		rx_lower_limit;	/* Lower and upper limits of	*/
+	u_int		rx_upper_limit;	/* receive buffer.		*/
+
+	u_int		rx_head;	/* Head of receive ring buffer. */
+	u_int		tx_mem_size;	/* Tx memory size (by default,	*/
+					/* last quarter of total memory).*/
+
+	u_int		tx_lower_limit;	/* Lower and upper limits of	*/
+	u_int		tx_upper_limit;	/* transmit buffer.		*/
+
+	u_int		tx_head;	/* Head and tail of 		*/
+	u_int		tx_tail;	/* transmit ring buffer.	*/
+
+	u_int		tx_last;	/* Pointer to beginning of last	*/
+					/* frame in the chain.		*/
+};
+
+extern char	irq2eemap[];
+extern u_char	ee2irqmap[];
+extern char	plus_irq2eemap[];
+extern u_char	plus_ee2irqmap[];
+
+int		ex_alloc_resources	(device_t);
+void		ex_release_resources	(device_t);
+int		ex_attach		(device_t);
+
+driver_intr_t	ex_intr;
+
+u_int16_t	eeprom_read		(u_int32_t, int);
+
+int		look_for_card		(u_int32_t);
+void		ex_get_address		(u_int32_t, u_char *);
+int		ex_card_type		(u_char *);