HEADS UP! All 3c5x9 users!

- Rip out all the static softc stuff and do softc allocation the right way.
- Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY
  method to enumerate all non-PnP ISA devices.

  This has the following consequences:

	- No 'ep' devices may be hardwired.
	  - All hardwired devices will probably be detected twice.
	    By hardwired I mean:

		device          ep0     at isa? port 0x300 irq 10

	- 'ep' devices are ordered by bus, slot, and then MAC address.

- Make 3c509B cards work in PnP mode.  Yes, they really work.
- Convert over to using ifmedia for media selection.  No more of this
  lame 'linkX' stuff.
- Consolidate a lot of duplicated code.
- Make a stab at not breaking MII based PCCARD devices.
  I doubt that the PCCARD stuff works any more than it did before my
  changes but theres hope.  My PCCARD hardware should arrive in a
  week or so.
- Retreive the media settings from the card EEPROM rather than guessing.
  I've got a 3c509-TPO that thinks its got an AUI port and if others
  can report similar problems I'll write a bit of clever code that will
  fix this but right now it works correctly on all but 1 card.
- Clean up a few things and make some cosmetic changes.
- Add myself as the MAINTAINER since nobody else wants to.  I'm
  in the best position to do this as I've got an example of most
  of the cards:

	EISA	3c579	bnc/aui
	MCA	3c529	tp/aui
	ISA	3c509	tpo
	ISA-PnP	3c509B	combo

   If someone wants to send me a any cards I don't have I'd appriciate
   it.  Also welcome are 3c59x boards since I'll be folding if_vx and
   if_ep at some point.

1 files changed, 3 insertions, 4 deletions

diff --git a/sys/dev/ep/if_epreg.h b/sys/dev/ep/if_epreg.h
index fb729cb..55cb4d5 100644
--- a/sys/dev/ep/if_epreg.h
+++ b/sys/dev/ep/if_epreg.h
@@ -62,7 +62,6 @@
 /*
  * some macros to acces long named fields
  */
-#define IS_BASE (is->id_iobase)
 #define BASE 	(sc->ep_io_addr)
 
 /*
@@ -235,10 +234,10 @@
 #define SET_INTR_MASK		(u_short) (0xe<<11)
 #define SET_RD_0_MASK		(u_short) (0xf<<11)
 #define SET_RX_FILTER		(u_short) (0x10<<11)
-#define FIL_INDIVIDUAL	(u_short) (0x1)
+#define FIL_INDIVIDUAL		(u_short) (0x1)
 #define FIL_GROUP		(u_short) (0x2)
-#define FIL_BRDCST	(u_short) (0x4)
-#define FIL_ALL		(u_short) (0x8)
+#define FIL_BRDCST		(u_short) (0x4)
+#define FIL_ALL			(u_short) (0x8)
 #define SET_RX_EARLY_THRESH	(u_short) (0x11<<11)
 #define SET_TX_AVAIL_THRESH	(u_short) (0x12<<11)
 #define SET_TX_START_THRESH	(u_short) (0x13<<11)