MFC: r295906

Fix and clean up usage of DMA and TSO segments:
- At Intel it is believed that most of their products support "only"
  40 DMA segments so lower {EM,IGB}_MAX_SCATTER accordingly. Actually,
  40 is more than plenty to handle full size TSO packets so it doesn't
  make sense to further distinguish between MAC variants that really
  can do 64 DMA segments. Moreover, capping at 40 DMA segments limits
  the stack usage of {em,igb}_xmit() that - given the rare use of more
  than these - previously hardly was justifiable, while still being
  sufficient to avoid the problems seen with em(4) and EM_MAX_SCATTER
  set to 32.
- In igb(4), pass the actually supported TSO parameters up the stack.
  Previously, the defaults set in if_attach_internal() were applied,
  i. e. a maximum of 35 TSO segments, which made supporting more than
  these in the driver pointless. However, this might explain why no
  problems were seen with IGB_MAX_SCATTER at 64.
- In em(4), take the 5 m_pullup(9) invocations performed by em_xmit()
  in the TSO case into account when reporting TSO parameters upwards.
  In the worst case, each of these calls will add another mbuf and,
  thus, the requirement for an additional DMA segment. So for best
  performance, it doesn't make sense to advertize a maximum of TSO
  segments that typically will require defragmentation in em_xmit().
  Again, this leaves enough room to handle full size TSO packets.
- Drop TSO macros from if_lem.h given that corresponding MACS don't
  support TSO in the first place.

Reviewed by:	erj, sbruno, jeffrey.e.pieper_intel.com
Approved by:	re (gjb)

1 files changed, 6 insertions, 0 deletions

diff --git a/sys/dev/e1000/if_igb.c b/sys/dev/e1000/if_igb.c
index 69180d0..cdd067f 100644
--- a/sys/dev/e1000/if_igb.c
+++ b/sys/dev/e1000/if_igb.c
@@ -3043,6 +3043,12 @@ igb_setup_interface(device_t dev, struct adapter *adapter)
 	ifp->if_softc = adapter;
 	ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
 	ifp->if_ioctl = igb_ioctl;
+
+	/* TSO parameters */
+	ifp->if_hw_tsomax = IP_MAXPACKET;
+	ifp->if_hw_tsomaxsegcount = IGB_MAX_SCATTER;
+	ifp->if_hw_tsomaxsegsize = IGB_TSO_SEG_SIZE;
+
 #ifndef IGB_LEGACY_TX
 	ifp->if_transmit = igb_mq_start;
 	ifp->if_qflush = igb_qflush;