Add support for the new I350 family of 1G interfaces.

    - this also includes virtualization support on these devices

Correct some vlan issues we were seeing in test, jumbo frames on vlans
did not work correctly, this was all due to confused logic around HW
filters, the new code should now work for all uses.

Important fix: when mbuf resources are depeleted, it was possible to
completely empty the RX ring, and then the RX engine would stall
forever. This is fixed by a flag being set whenever the refresh code
fails due to an mbuf shortage, also the local timer now makes sure
that all queues get an interrupt when it runs, the interrupt code
will then always call rxeof, and in that routine the first thing done
is now to check the refresh flag and call refresh_mbufs. This has been
verified to fix this type 'hang'. Similar code will follow in the other
drivers.

Finally, sync up shared code for the I350 support.

Thanks to everyone that has been reporting issues, and helping in the
debug/test process!!

1 files changed, 0 insertions, 1 deletions

diff --git a/sys/dev/e1000/e1000_api.h b/sys/dev/e1000/e1000_api.h
index 36ba712..2621a6e 100644
--- a/sys/dev/e1000/e1000_api.h
+++ b/sys/dev/e1000/e1000_api.h
@@ -96,7 +96,6 @@ s32  e1000_phy_commit(struct e1000_hw *hw);
 void e1000_power_up_phy(struct e1000_hw *hw);
 void e1000_power_down_phy(struct e1000_hw *hw);
 s32  e1000_read_mac_addr(struct e1000_hw *hw);
-s32  e1000_read_pba_num(struct e1000_hw *hw, u32 *part_num);
 s32  e1000_read_pba_string(struct e1000_hw *hw, u8 *pba_num, 
                            u32 pba_num_size);
 s32  e1000_read_pba_length(struct e1000_hw *hw, u32 *pba_num_size);