This fixes several problems with CIS as suggested by Justin Gibbs:

4) The cardbus CIS code treats the CIS_PTR as a mapping register if
   it is mentioned in the CIS.  I don't have a spec handy to understand
   why the CIS_PTR is mentioned in the CIS, but allocating a memory range
   for it is certainly bogus.  My patch ignores bar #6 to prevent the
   mapping.
   [The pccard spec says that BAR 0 and 7 (-1 and 6 in thic case since we
    did a minus one) is "reserved".  The off by 1 error has been fixed.
    also bar=5 is invalid for IO maps, so we check it.]

5) The CIS code allocated duplicate resources to those already found
   by cardbus_add_resources().  The fix is to pass in the bar computed
   from the CIS instead of the particular resource ID for that bar,
   so bus_generic_alloc_resource succeeds in finding the old resource.
   [fixed, also removed superfluous (and incorrect) writing back to the
    PCI config space.]

7) The CIS code seems to use the wrong bit to determine rather a particular
   register mapping is for I/O or memory space.  From looking at the
   two cards I have, it seems TPL_BAR_REG_AS should be 0x10 instead
   of 0x08.  Otherwise, all registers that should be I/O mapped gain
   a second mapping in memory space.
   [Oops, the spec does say 0x10..., fixed]

Submitted by: Justin Gibbs

1 files changed, 3 insertions, 6 deletions

diff --git a/sys/dev/cardbus/cardbus_cis.c b/sys/dev/cardbus/cardbus_cis.c
index a676e95..deef8cd 100644
--- a/sys/dev/cardbus/cardbus_cis.c
+++ b/sys/dev/cardbus/cardbus_cis.c
@@ -274,7 +274,7 @@ DECODE_PROTOTYPE(bar)
 			type = SYS_RES_MEMORY;
 		}
 		bar = (reg & TPL_BAR_REG_ASI_MASK) - 1;
-		if (bar < 0 || bar > 6) {
+		if (bar < 0 || bar > 5 || (type == SYS_RES_IOPORT && bar == 5)) {
 			device_printf(dev, "Invalid BAR number: %02x(%02x)\n",
 				      reg, bar);
 			return EINVAL;
@@ -282,13 +282,10 @@ DECODE_PROTOTYPE(bar)
 		bar = CARDBUS_BASE0_REG + bar * 4;
 		DEVPRINTF((dev, "Opening BAR: type=%s, bar=%02x, len=%04x\n",
 			   (type==SYS_RES_MEMORY)?"MEM":"IO", bar, len));
-		res = bus_generic_alloc_resource(child, child, type, &reg, 0,
+		res = bus_generic_alloc_resource(child, child, type, &bar, 0,
 			 ~0, len, rman_make_alignment_flags(len) | RF_ACTIVE);
 		if (res == NULL) {
-			device_printf(dev, "Cannot allocate BAR %02x\n", reg);
-		} else {
-			start = rman_get_start(res);
-			pci_write_config(child, reg, start, 4);
+			device_printf(dev, "Cannot allocate BAR %02x\n", bar);
 		}
 	}
 	return 0;