Set the correct IFS parameters for the beacon tx queue

when operating in ap and adhoc modes.

1 files changed, 45 insertions, 1 deletions

diff --git a/sys/dev/ath/if_ath.c b/sys/dev/ath/if_ath.c
index a8a54b7..41d58a9 100644
--- a/sys/dev/ath/if_ath.c
+++ b/sys/dev/ath/if_ath.c
@@ -1721,11 +1721,53 @@ ath_beaconq_setup(struct ath_hal *ah)
 	qi.tqi_aifs = HAL_TXQ_USEDEFAULT;
 	qi.tqi_cwmin = HAL_TXQ_USEDEFAULT;
 	qi.tqi_cwmax = HAL_TXQ_USEDEFAULT;
-	/* NB: don't enable any interrupts */
+	/* NB: for dynamic turbo, don't enable any other interrupts */
+	qi.tqi_qflags = TXQ_FLAG_TXDESCINT_ENABLE;
 	return ath_hal_setuptxqueue(ah, HAL_TX_QUEUE_BEACON, &qi);
 }
 
 /*
+ * Setup the transmit queue parameters for the beacon queue.
+ */
+static int
+ath_beaconq_config(struct ath_softc *sc)
+{
+#define	ATH_EXPONENT_TO_VALUE(v)	((1<<(v))-1)
+	struct ieee80211com *ic = &sc->sc_ic;
+	struct ath_hal *ah = sc->sc_ah;
+	HAL_TXQ_INFO qi;
+
+	ath_hal_gettxqueueprops(ah, sc->sc_bhalq, &qi);
+	if (ic->ic_opmode == IEEE80211_M_HOSTAP) {
+		/*
+		 * Always burst out beacon and CAB traffic.
+		 */
+		qi.tqi_aifs = ATH_BEACON_AIFS_DEFAULT;
+		qi.tqi_cwmin = ATH_BEACON_CWMIN_DEFAULT;
+		qi.tqi_cwmax = ATH_BEACON_CWMAX_DEFAULT;
+	} else {
+		struct wmeParams *wmep =
+			&ic->ic_wme.wme_chanParams.cap_wmeParams[WME_AC_BE];
+		/*
+		 * Adhoc mode; important thing is to use 2x cwmin.
+		 */
+		qi.tqi_aifs = wmep->wmep_aifsn;
+		qi.tqi_cwmin = 2*ATH_EXPONENT_TO_VALUE(wmep->wmep_logcwmin);
+		qi.tqi_cwmax = ATH_EXPONENT_TO_VALUE(wmep->wmep_logcwmax);
+	}
+
+	if (!ath_hal_settxqueueprops(ah, sc->sc_bhalq, &qi)) {
+		device_printf(sc->sc_dev, "unable to update parameters for "
+			"beacon hardware queue!\n");
+		return 0;
+	} else {
+		ath_hal_resettxqueue(ah, sc->sc_bhalq); /* push to h/w */
+		return 1;
+	}
+#undef ATH_EXPONENT_TO_VALUE
+}
+
+/*
  * Allocate and setup an initial beacon frame.
  */
 static int
@@ -2111,6 +2153,7 @@ ath_beacon_config(struct ath_softc *sc)
 			intval |= HAL_BEACON_ENA;
 			if (!sc->sc_hasveol)
 				sc->sc_imask |= HAL_INT_SWBA;
+			ath_beaconq_config(sc);
 		} else if (ic->ic_opmode == IEEE80211_M_HOSTAP) {
 			/*
 			 * In AP mode we enable the beacon timers and
@@ -2118,6 +2161,7 @@ ath_beacon_config(struct ath_softc *sc)
 			 */
 			intval |= HAL_BEACON_ENA;
 			sc->sc_imask |= HAL_INT_SWBA;	/* beacon prepare */
+			ath_beaconq_config(sc);
 		}
 		ath_hal_beaconinit(ah, nexttbtt, intval);
 		sc->sc_bmisscount = 0;