diff options
author | gibbs <gibbs@FreeBSD.org> | 1996-10-07 02:07:07 +0000 |
---|---|---|
committer | gibbs <gibbs@FreeBSD.org> | 1996-10-07 02:07:07 +0000 |
commit | 2032d50b04b561e4f9cb589ee91c179bfc3c6277 (patch) | |
tree | 7d55d74f2f11f315b5dc4c169d8760892ae4ba44 /sys/dev/advansys/advlib.c | |
download | FreeBSD-src-2032d50b04b561e4f9cb589ee91c179bfc3c6277.zip FreeBSD-src-2032d50b04b561e4f9cb589ee91c179bfc3c6277.tar.gz |
Advanced Systems Inc. SCSI Controller driver and ISA/VL front end.
I have only tested the ABP5140 card and only with a single CDROM drive
but it seems to work fine. This driver relies on features found only in
the SCSI branch so will not work in -current until those changes
are brought in. It also doesn't have any error handling code *yet*.
The goal is to use this driver as the development platform for the new
generic SCSI layer error recovery/handling code.
PCI and EISA front ends will show up as soon as I get my hands on
the cards. There are also a few issues in the driver that I need
to clear up with AdvanSys before I can suggest sticking one of
these cards in your server. 8-)
Thanks to AdvanSys for releasing this code under a suitable copyright.
Obtained from: Ported from the Linux driver writen by
bobf@advansys.com (Bob Frey).
Diffstat (limited to 'sys/dev/advansys/advlib.c')
-rw-r--r-- | sys/dev/advansys/advlib.c | 1654 |
1 files changed, 1654 insertions, 0 deletions
diff --git a/sys/dev/advansys/advlib.c b/sys/dev/advansys/advlib.c new file mode 100644 index 0000000..365f343 --- /dev/null +++ b/sys/dev/advansys/advlib.c @@ -0,0 +1,1654 @@ +/* + * Low level routines for the Advanced Systems Inc. SCSI controllers chips + * + * Copyright (c) 1996 Justin T. Gibbs. + * All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * 1. Redistributions of source code must retain the above copyright + * notice immediately at the beginning of the file, without modification, + * this list of conditions, and the following disclaimer. + * 2. Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in the + * documentation and/or other materials provided with the distribution. + * 3. The name of the author may not be used to endorse or promote products + * derived from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND + * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE + * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE + * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR + * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL + * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS + * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT + * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY + * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF + * SUCH DAMAGE. + * + * $Id$ + */ +/* + * Ported from: + * advansys.c - Linux Host Driver for AdvanSys SCSI Adapters + * + * Copyright (c) 1995-1996 Advanced System Products, Inc. + * All Rights Reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that redistributions of source + * code retain the above copyright notice and this comment without + * modification. + */ + +#include <sys/param.h> +#include <sys/systm.h> + +#include <machine/clock.h> + +#include <scsi/scsi_all.h> +#include <scsi/scsi_message.h> +#include <scsi/scsi_disk.h> + +#include <vm/vm.h> +#include <vm/vm_param.h> +#include <vm/pmap.h> + +#include <dev/advansys/advlib.h> +#include <dev/advansys/advmcode.h> + +/* + * Allowable periods in ns + */ +u_int8_t adv_sdtr_period_tbl[] = +{ + 25, + 30, + 35, + 40, + 50, + 60, + 70, + 85 +}; + +struct sdtr_xmsg { + u_int8_t msg_type; + u_int8_t msg_len; + u_int8_t msg_req; + u_int8_t xfer_period; + u_int8_t req_ack_offset; + u_int8_t res; +}; + +/* + * Some of the early PCI adapters have problems with + * async transfers. Instead try to use an offset of + * 1. + */ +#define ASYN_SDTR_DATA_FIX 0x41 + +/* LRAM routines */ +static void adv_read_lram_16_multi __P((struct adv_softc *adv, u_int16_t s_addr, + u_int16_t *buffer, int count)); +static void adv_write_lram_16_multi __P((struct adv_softc *adv, + u_int16_t s_addr, u_int16_t *buffer, + int count)); +static void adv_mset_lram_16 __P((struct adv_softc *adv, + u_int16_t s_addr, u_int16_t set_value, + int count)); +static u_int32_t adv_msum_lram_16 __P((struct adv_softc *adv, u_int16_t s_addr, int count)); + +static int adv_write_and_verify_lram_16 __P((struct adv_softc *adv, + u_int16_t addr, u_int16_t value)); +static u_int32_t adv_read_lram_32 __P((struct adv_softc *adv, u_int16_t addr)); + + +static void adv_write_lram_32 __P((struct adv_softc *adv, u_int16_t addr, + u_int32_t value)); +static void adv_write_lram_32_multi __P((struct adv_softc *adv, u_int16_t s_addr, + u_int32_t *buffer, int count)); + +/* EEPROM routines */ +static u_int16_t adv_read_eeprom_16 __P((struct adv_softc *adv, u_int8_t addr)); +static u_int16_t adv_write_eeprom_16 __P((struct adv_softc *adv, u_int8_t addr, u_int16_t value)); +static int adv_write_eeprom_cmd_reg __P((struct adv_softc *adv, u_int8_t cmd_reg)); +static int adv_set_eeprom_config_once __P((struct adv_softc *adv, + struct adv_eeprom_config *eeprom_config)); + +/* Initialization */ +static u_int32_t adv_load_microcode __P((struct adv_softc *adv, u_int16_t s_addr, + u_int16_t *mcode_buf, u_int16_t mcode_size)); +static void adv_init_lram __P((struct adv_softc *adv)); +static int adv_init_microcode_var __P((struct adv_softc *adv)); +static void adv_init_qlink_var __P((struct adv_softc *adv)); + +/* Interrupts */ +static void adv_disable_interrupt __P((struct adv_softc *adv)); +static void adv_enable_interrupt __P((struct adv_softc *adv)); +static void adv_toggle_irq_act __P((struct adv_softc *adv)); + +/* Chip Control */ +#if UNUSED +static void adv_start_execution __P((struct adv_softc *adv)); +#endif +static int adv_start_chip __P((struct adv_softc *adv)); +static int adv_stop_chip __P((struct adv_softc *adv)); +static void adv_set_chip_ih __P((struct adv_softc *adv, u_int16_t ins_code)); +static void adv_set_bank __P((struct adv_softc *adv, u_int8_t bank)); +#if UNUSED +static u_int8_t adv_get_chip_scsi_ctrl __P((struct adv_softc *adv)); +#endif + +/* Queue handling and execution */ +static int adv_sgcount_to_qcount __P((int sgcount)); +static void adv_get_q_info __P((struct adv_softc *adv, u_int16_t s_addr, u_int16_t *inbuf, + int words)); +static u_int adv_get_num_free_queues __P((struct adv_softc *adv, u_int8_t n_qs)); +static u_int8_t adv_alloc_free_queues __P((struct adv_softc *adv, u_int8_t free_q_head, + u_int8_t n_free_q)); +static u_int8_t adv_alloc_free_queue __P((struct adv_softc *adv, u_int8_t free_q_head)); +static int adv_send_scsi_queue __P((struct adv_softc *adv, struct adv_scsi_q *scsiq, + u_int8_t n_q_required)); +static void adv_put_ready_sg_list_queue __P((struct adv_softc *adv, struct adv_scsi_q *scsiq, + u_int8_t q_no)); +static void adv_put_ready_queue __P((struct adv_softc *adv, struct adv_scsi_q *scsiq, u_int8_t q_no)); +static void adv_put_scsiq __P((struct adv_softc *adv, u_int16_t s_addr, u_int16_t *buffer, int words)); + +/* SDTR */ +static u_int8_t adv_msgout_sdtr __P((struct adv_softc *adv, u_int8_t sdtr_period, u_int8_t sdtr_offset)); +static u_int8_t adv_get_card_sync_setting __P((u_int8_t period, u_int8_t offset)); +static void adv_set_chip_sdtr __P((struct adv_softc *adv, u_int8_t sdtr_data, + u_int8_t tid_no)); + + +/* Exported Function first */ + +u_int8_t +adv_read_lram_8(adv, addr) + struct adv_softc *adv; + u_int16_t addr; + +{ + u_int8_t byte_data; + u_int16_t word_data; + + /* + * LRAM is accessed on 16bit boundaries. + */ + ADV_OUTW(adv, ADV_LRAM_ADDR, addr & 0xFFFE); + word_data = ADV_INW(adv, ADV_LRAM_DATA); + if (addr & 1) { +#if BYTE_ORDER == BIG_ENDIAN + byte_data = (u_int8_t)(word_data & 0xFF); +#else + byte_data = (u_int8_t)((word_data >> 8) & 0xFF); +#endif + } else { +#if BYTE_ORDER == BIG_ENDIAN + byte_data = (u_int8_t)((word_data >> 8) & 0xFF); +#else + byte_data = (u_int8_t)(word_data & 0xFF); +#endif + } + return (byte_data); +} + +void +adv_write_lram_8(adv, addr, value) + struct adv_softc *adv; + u_int16_t addr; + u_int8_t value; +{ + u_int16_t word_data; + + word_data = adv_read_lram_16(adv, addr & 0xFFFE); + if (addr & 1) { + word_data &= 0x00FF; + word_data |= (((u_int8_t)value << 8) & 0xFF00); + } else { + word_data &= 0xFF00; + word_data |= ((u_int8_t)value & 0x00FF); + } + adv_write_lram_16(adv, addr & 0xFFFE, word_data); +} + + +u_int16_t +adv_read_lram_16(adv, addr) + struct adv_softc *adv; + u_int16_t addr; +{ + ADV_OUTW(adv, ADV_LRAM_ADDR, addr); + return (ADV_INW(adv, ADV_LRAM_DATA)); +} + +void +adv_write_lram_16(adv, addr, value) + struct adv_softc *adv; + u_int16_t addr; + u_int16_t value; +{ + ADV_OUTW(adv, ADV_LRAM_ADDR, addr); + ADV_OUTW(adv, ADV_LRAM_DATA, value); +} + + +/* + * Return the fully qualified board type for the adapter. + * The chip_revision must be set before this function is called. + */ +void +adv_get_board_type(adv) + struct adv_softc *adv; +{ + if ((adv->chip_version >= ADV_CHIP_MIN_VER_VL) && + (adv->chip_version <= ADV_CHIP_MAX_VER_VL)) { + if (((adv->iobase & 0x0C30) == 0x0C30) || + ((adv->iobase & 0x0C50) == 0x0C50)) { + adv->type = ADV_EISA; + } else + adv->type = ADV_VL; + } else if ((adv->chip_version >= ADV_CHIP_MIN_VER_ISA) && + (adv->chip_version <= ADV_CHIP_MAX_VER_ISA)) { + if (adv->chip_version >= ADV_CHIP_MIN_VER_ISA_PNP) { + adv->type = ADV_ISAPNP; + } else + adv->type = ADV_ISA; + } else if ((adv->chip_version >= ADV_CHIP_MIN_VER_PCI) && + (adv->chip_version <= ADV_CHIP_MAX_VER_PCI)) { + adv->type = ADV_PCI; + } else + panic("adv_get_board_type: Unknown board type encountered"); +} + +u_int16_t +adv_get_eeprom_config(adv, eeprom_config) + struct adv_softc *adv; + struct adv_eeprom_config *eeprom_config; +{ + u_int16_t sum; + u_int16_t *wbuf; + u_int8_t cfg_beg; + u_int8_t cfg_end; + u_int8_t s_addr; + + wbuf = (u_int16_t *)eeprom_config; + sum = 0; + + for (s_addr = 0; s_addr < 2; s_addr++, wbuf++) { + *wbuf = adv_read_eeprom_16(adv, s_addr); + sum += *wbuf; + } + + if (adv->type & ADV_VL) { + cfg_beg = ADV_EEPROM_CFG_BEG_VL; + cfg_end = ADV_EEPROM_MAX_ADDR_VL; + } else { + cfg_beg = ADV_EEPROM_CFG_BEG; + cfg_end = ADV_EEPROM_MAX_ADDR; + } + + for (s_addr = cfg_beg; s_addr <= (cfg_end - 1); s_addr++, wbuf++) { + *wbuf = adv_read_eeprom_16(adv, s_addr); + sum += *wbuf; +#if ADV_DEBUG_EEPROM + printf("Addr 0x%x: 0x%04x\n", s_addr, *wbuf); +#endif + } + *wbuf = adv_read_eeprom_16(adv, s_addr); + return (sum); +} + +int +adv_set_eeprom_config(adv, eeprom_config) + struct adv_softc *adv; + struct adv_eeprom_config *eeprom_config; +{ + int retry; + + retry = 0; + while (1) { + if (adv_set_eeprom_config_once(adv, eeprom_config) == 0) { + break; + } + if (++retry > ADV_EEPROM_MAX_RETRY) { + break; + } + } + return (retry > ADV_EEPROM_MAX_RETRY); +} + +int +adv_reset_chip_and_scsi_bus(adv) + struct adv_softc *adv; +{ + adv_stop_chip(adv); + ADV_OUTB(adv, ADV_CHIP_CTRL, ADV_CC_CHIP_RESET | ADV_CC_SCSI_RESET | ADV_CC_HALT); + DELAY(200 * 1000); + + adv_set_chip_ih(adv, ADV_INS_RFLAG_WTM); + adv_set_chip_ih(adv, ADV_INS_HALT); + + ADV_OUTB(adv, ADV_CHIP_CTRL, ADV_CC_CHIP_RESET | ADV_CC_HALT); + ADV_OUTB(adv, ADV_CHIP_CTRL, ADV_CC_HALT); + DELAY(200 * 1000); + return (adv_is_chip_halted(adv)); +} + +int +adv_test_external_lram(adv) + struct adv_softc* adv; +{ + u_int16_t q_addr; + u_int16_t saved_value; + int success; + + success = 0; + + /* XXX Why 241? */ + q_addr = ADV_QNO_TO_QADDR(241); + saved_value = adv_read_lram_16(adv, q_addr); + if (adv_write_and_verify_lram_16(adv, q_addr, 0x55AA) == 0) { + success = 1; + adv_write_lram_16(adv, q_addr, saved_value); + } + return (success); +} + + +int +adv_init_lram_and_mcode(adv) + struct adv_softc *adv; +{ + u_int32_t retval; + adv_disable_interrupt(adv); + + adv_init_lram(adv); + + retval = adv_load_microcode(adv, 0, (u_int16_t *)adv_mcode, adv_mcode_size); + if (retval != adv_mcode_chksum) { + printf("adv%d: Microcode download failed checksum!\n", + adv->unit); + return (1); + } + + if (adv_init_microcode_var(adv) != 0) + return (1); + + adv_enable_interrupt(adv); + return (0); +} + +u_int8_t +adv_get_chip_irq(adv) + struct adv_softc *adv; +{ + u_int16_t cfg_lsw; + u_int8_t chip_irq; + + cfg_lsw = ADV_INW(adv, ADV_CONFIG_LSW); + + if ((adv->type & ADV_VL) != 0) { + chip_irq = (u_int8_t)(((cfg_lsw >> 2) & 0x07)); + if ((chip_irq == 0) || + (chip_irq == 4) || + (chip_irq == 7)) { + return (0); + } + return (chip_irq + (ADV_MIN_IRQ_NO - 1)); + } + chip_irq = (u_int8_t)(((cfg_lsw >> 2) & 0x03)); + if (chip_irq == 3) + chip_irq += 2; + return (chip_irq + ADV_MIN_IRQ_NO); +} + +u_int8_t +adv_set_chip_irq(adv, irq_no) + struct adv_softc *adv; + u_int8_t irq_no; +{ + u_int16_t cfg_lsw; + + if ((adv->type & ADV_VL) != 0) { + if (irq_no != 0) { + if ((irq_no < ADV_MIN_IRQ_NO) || (irq_no > ADV_MAX_IRQ_NO)) { + irq_no = 0; + } else { + irq_no -= ADV_MIN_IRQ_NO - 1; + } + } + cfg_lsw = ADV_INW(adv, ADV_CONFIG_LSW) & 0xFFE3; + cfg_lsw |= 0x0010; + ADV_OUTW(adv, ADV_CONFIG_LSW, cfg_lsw); + adv_toggle_irq_act(adv); + + cfg_lsw = ADV_INW(adv, ADV_CONFIG_LSW) & 0xFFE0; + cfg_lsw |= (irq_no & 0x07) << 2; + ADV_OUTW(adv, ADV_CONFIG_LSW, cfg_lsw); + adv_toggle_irq_act(adv); + } else if ((adv->type & ADV_ISA) != 0) { + if (irq_no == 15) + irq_no -= 2; + irq_no -= ADV_MIN_IRQ_NO; + cfg_lsw = ADV_INW(adv, ADV_CONFIG_LSW) & 0xFFF3; + cfg_lsw |= (irq_no & 0x03) << 2; + ADV_OUTW(adv, ADV_CONFIG_LSW, cfg_lsw); + } + return (adv_get_chip_irq(adv)); +} + +int +adv_execute_scsi_queue(adv, scsiq) + struct adv_softc *adv; + struct adv_scsi_q *scsiq; +{ + int retval; + u_int n_q_required; + int s; + u_int32_t addr; + u_int8_t sg_entry_cnt; + u_int8_t target_ix; + u_int8_t sg_entry_cnt_minus_one; + u_int8_t tid_no; + u_int8_t sdtr_data; + u_int32_t *p_data_addr; + u_int32_t *p_data_bcount; + + scsiq->q1.q_no = 0; + retval = 1; /* Default to error case */ + target_ix = scsiq->q2.target_ix; + tid_no = ADV_TIX_TO_TID(target_ix); + + n_q_required = 1; + + s = splbio(); + if (scsiq->cdbptr->opcode == REQUEST_SENSE) { + if (((adv->initiate_sdtr & scsiq->q1.target_id) != 0) + && ((adv->sdtr_done & scsiq->q1.target_id) != 0)) { + int sdtr_index; + + sdtr_data = adv_read_lram_8(adv, ADVV_SDTR_DATA_BEG + tid_no); + sdtr_index = (sdtr_data >> 4); + adv_msgout_sdtr(adv, adv_sdtr_period_tbl[sdtr_index], + (sdtr_data & ADV_SYN_MAX_OFFSET)); + scsiq->q1.cntl |= (QC_MSG_OUT | QC_URGENT); + } + } + + if ((scsiq->q1.cntl & QC_SG_HEAD) != 0) { + sg_entry_cnt = scsiq->sg_head->entry_cnt; + sg_entry_cnt_minus_one = sg_entry_cnt - 1; + +#ifdef DIAGNOSTIC + if (sg_entry_cnt <= 1) + panic("adv_execute_scsi_queue: Queue with QC_SG_HEAD set but %d segs.", sg_entry_cnt); + + if (sg_entry_cnt > ADV_MAX_SG_LIST) + panic("adv_execute_scsi_queue: Queue with too many segs."); + + if (adv->type & (ADV_ISA | ADV_VL | ADV_EISA)) { + for (i = 0; i < sg_entry_cnt_minus_one; i++) { + addr = scsiq->sg_head->sg_list[i].addr + + scsiq->sg_head->sg_list[i].bytes; + + if ((addr & 0x0003) != 0) + panic("adv_execute_scsi_queue: SG with odd address or byte count"); + } + } +#endif + p_data_addr = &scsiq->sg_head->sg_list[sg_entry_cnt_minus_one].addr; + p_data_bcount = &scsiq->sg_head->sg_list[sg_entry_cnt_minus_one].bytes; + + n_q_required = adv_sgcount_to_qcount(sg_entry_cnt); + scsiq->sg_head->queue_cnt = n_q_required - 1; + } else { + p_data_addr = &scsiq->q1.data_addr; + p_data_bcount = &scsiq->q1.data_cnt; + n_q_required = 1; + } + + if (adv->bug_fix_control & ADV_BUG_FIX_ADD_ONE_BYTE) { + addr = *p_data_addr + *p_data_bcount; + if ((addr & 0x0003) != 0) { + /* + * XXX Is this extra test (the one on data_cnt) really only supposed to apply + * to the non SG case or was it a bug due to code duplication? + */ + if ((scsiq->q1.cntl & QC_SG_HEAD) != 0 || (scsiq->q1.data_cnt & 0x01FF) == 0) { + if ((scsiq->cdbptr->opcode == READ_COMMAND) || + (scsiq->cdbptr->opcode == READ_BIG)) { + if ((scsiq->q2.tag_code & ADV_TAG_FLAG_ADD_ONE_BYTE) == 0) { + (*p_data_bcount)++; + scsiq->q2.tag_code |= ADV_TAG_FLAG_ADD_ONE_BYTE; + } + } + + } + } + } + + if ((adv_get_num_free_queues(adv, n_q_required) >= n_q_required) + || ((scsiq->q1.cntl & QC_URGENT) != 0)) + retval = adv_send_scsi_queue(adv, scsiq, n_q_required); + + splx(s); + return (retval); +} + + +u_int8_t +adv_copy_lram_doneq(adv, q_addr, scsiq, max_dma_count) + struct adv_softc *adv; + u_int16_t q_addr; + struct adv_q_done_info *scsiq; + u_int32_t max_dma_count; +{ + u_int16_t val; + u_int8_t sg_queue_cnt; + + adv_get_q_info(adv, q_addr + ADV_SCSIQ_DONE_INFO_BEG, + (u_int16_t *)scsiq, + (sizeof(scsiq->d2) + sizeof(scsiq->d3)) / 2); + +#if BYTE_ORDER == BIG_ENDIAN + adv_adj_endian_qdone_info(scsiq); +#endif + + val = adv_read_lram_16(adv, q_addr + ADV_SCSIQ_B_STATUS); + scsiq->q_status = val & 0xFF; + scsiq->q_no = (val >> 8) & 0XFF; + + val = adv_read_lram_16(adv, q_addr + ADV_SCSIQ_B_CNTL); + scsiq->cntl = val & 0xFF; + sg_queue_cnt = (val >> 8) & 0xFF; + + val = adv_read_lram_16(adv,q_addr + ADV_SCSIQ_B_SENSE_LEN); + scsiq->sense_len = val & 0xFF; + scsiq->user_def = (val >> 8) & 0xFF; + + scsiq->remain_bytes = adv_read_lram_32(adv, + q_addr + ADV_SCSIQ_DW_REMAIN_XFER_CNT); + /* + * XXX Is this just a safeguard or will the counter really + * have bogus upper bits? + */ + scsiq->remain_bytes &= max_dma_count; + + return (sg_queue_cnt); +} + +int +adv_stop_execution(adv) + struct adv_softc *adv; +{ + int count; + + count = 0; + if (adv_read_lram_8(adv, ADV_STOP_CODE_B) == 0) { + adv_write_lram_8(adv, ADV_STOP_CODE_B, + ADV_STOP_REQ_RISC_STOP); + do { + if (adv_read_lram_8(adv, ADV_STOP_CODE_B) & + ADV_STOP_ACK_RISC_STOP) { + return (1); + } + DELAY(1000); + } while (count++ < 20); + } + return (0); +} + +int +adv_is_chip_halted(adv) + struct adv_softc *adv; +{ + if ((ADV_INW(adv, ADV_CHIP_STATUS) & ADV_CSW_HALTED) != 0) { + if ((ADV_INB(adv, ADV_CHIP_CTRL) & ADV_CC_HALT) != 0) { + return (1); + } + } + return (0); +} + +/* + * XXX The numeric constants and the loops in this routine + * need to be documented. + */ +void +adv_ack_interrupt(adv) + struct adv_softc *adv; +{ + u_int8_t host_flag; + u_int8_t risc_flag; + int loop; + + loop = 0; + do { + risc_flag = adv_read_lram_8(adv, ADVV_RISC_FLAG_B); + if (loop++ > 0x7FFF) { + break; + } + } while ((risc_flag & ADV_RISC_FLAG_GEN_INT) != 0); + + host_flag = adv_read_lram_8(adv, ADVV_HOST_FLAG_B); + adv_write_lram_8(adv, ADVV_HOST_FLAG_B, + host_flag | ADV_HOST_FLAG_ACK_INT); + + ADV_OUTW(adv, ADV_CHIP_STATUS, ADV_CIW_INT_ACK); + loop = 0; + while (ADV_INW(adv, ADV_CHIP_STATUS) & ADV_CSW_INT_PENDING) { + ADV_OUTW(adv, ADV_CHIP_STATUS, ADV_CIW_INT_ACK); + if (loop++ > 3) { + break; + } + } + + adv_write_lram_8(adv, ADVV_HOST_FLAG_B, host_flag); +} + +/* + * Handle all conditions that may halt the chip waiting + * for us to intervene. + */ +void +adv_isr_chip_halted(adv) + struct adv_softc *adv; +{ + u_int16_t int_halt_code; + u_int8_t halt_qp; + u_int16_t halt_q_addr; + u_int8_t target_ix; + u_int8_t q_cntl; + u_int8_t tid_no; + target_bit_vector target_id; + target_bit_vector scsi_busy; + u_int8_t asyn_sdtr; + u_int8_t sdtr_data; + + int_halt_code = adv_read_lram_16(adv, ADVV_HALTCODE_W); + halt_qp = adv_read_lram_8(adv, ADVV_CURCDB_B); + halt_q_addr = ADV_QNO_TO_QADDR(halt_qp); + target_ix = adv_read_lram_8(adv, halt_q_addr + ADV_SCSIQ_B_TARGET_IX); + q_cntl = adv_read_lram_8(adv, halt_q_addr + ADV_SCSIQ_B_CNTL); + tid_no = ADV_TIX_TO_TID(target_ix); + target_id = ADV_TID_TO_TARGET_ID(tid_no); + if (adv->needs_async_bug_fix & target_id) + asyn_sdtr = ASYN_SDTR_DATA_FIX; + else + asyn_sdtr = 0; + if (int_halt_code == ADV_HALT_EXTMSG_IN) { + struct sdtr_xmsg sdtr_xmsg; + int sdtr_accept; + + adv_read_lram_16_multi(adv, ADVV_MSGIN_BEG, + (u_int16_t *) &sdtr_xmsg, + sizeof(sdtr_xmsg) >> 1); + if ((sdtr_xmsg.msg_type == MSG_EXTENDED) && + (sdtr_xmsg.msg_len == MSG_EXT_SDTR_LEN)) { + sdtr_accept = TRUE; + if (sdtr_xmsg.msg_req == MSG_EXT_SDTR) { + if (sdtr_xmsg.req_ack_offset > ADV_SYN_MAX_OFFSET) { + + sdtr_accept = FALSE; + sdtr_xmsg.req_ack_offset = ADV_SYN_MAX_OFFSET; + } + sdtr_data = adv_get_card_sync_setting(sdtr_xmsg.xfer_period, + sdtr_xmsg.req_ack_offset); + if (sdtr_xmsg.req_ack_offset == 0) { + q_cntl &= ~QC_MSG_OUT; + adv->initiate_sdtr &= ~target_id; + adv->sdtr_done &= ~target_id; + adv_set_chip_sdtr(adv, asyn_sdtr, tid_no); + } else if (sdtr_data == 0) { + q_cntl |= QC_MSG_OUT; + adv->initiate_sdtr &= ~target_id; + adv->sdtr_done &= ~target_id; + adv_set_chip_sdtr(adv, asyn_sdtr, tid_no); + } else { + if (sdtr_accept && (q_cntl & QC_MSG_OUT)) { + q_cntl &= ~QC_MSG_OUT; + adv->sdtr_done |= target_id; + adv->initiate_sdtr |= target_id; + adv->needs_async_bug_fix &= ~target_id; + adv_set_chip_sdtr(adv, sdtr_data, tid_no); + } else { + + q_cntl |= QC_MSG_OUT; + + adv_msgout_sdtr(adv, + sdtr_xmsg.xfer_period, + sdtr_xmsg.req_ack_offset); + adv->needs_async_bug_fix &= ~target_id; + adv_set_chip_sdtr(adv, sdtr_data, tid_no); + adv->sdtr_done |= target_id; + adv->initiate_sdtr |= target_id; + } + } + + adv_write_lram_8(adv, halt_q_addr + ADV_SCSIQ_B_CNTL, q_cntl); + } + } + /* + * XXX Hey, shouldn't we be rejecting any messages we don't understand? + * The old code also did not un-halt the processor if it recieved + * an extended message that it didn't understand. That didn't + * seem right, so I changed this routine to always un-halt the + * processor at the end. + */ + } else if (int_halt_code == ADV_HALT_CHK_CONDITION) { + u_int8_t tag_code; + u_int8_t q_status; + + q_cntl |= QC_REQ_SENSE; + if (((adv->initiate_sdtr & target_id) != 0) && + ((adv->sdtr_done & target_id) != 0)) { + + sdtr_data = adv_read_lram_8(adv, ADVV_SDTR_DATA_BEG + tid_no); + /* XXX Macrotize the extraction of the index from sdtr_data ??? */ + adv_msgout_sdtr(adv, adv_sdtr_period_tbl[(sdtr_data >> 4) & 0x0F], + sdtr_data & ADV_SYN_MAX_OFFSET); + q_cntl |= QC_MSG_OUT; + } + adv_write_lram_8(adv, halt_q_addr + ADV_SCSIQ_B_CNTL, q_cntl); + + /* Don't tag request sense commands */ + tag_code = adv_read_lram_8(adv, halt_q_addr + ADV_SCSIQ_B_TAG_CODE); + tag_code &= ~(MSG_SIMPLE_Q_TAG|MSG_HEAD_OF_Q_TAG|MSG_ORDERED_Q_TAG); + adv_write_lram_8(adv, halt_q_addr + ADV_SCSIQ_B_TAG_CODE, tag_code); + + q_status = adv_read_lram_8(adv, halt_q_addr + ADV_SCSIQ_B_STATUS); + q_status |= (QS_READY | QS_BUSY); + adv_write_lram_8(adv, halt_q_addr + ADV_SCSIQ_B_STATUS, q_status); + + scsi_busy = adv_read_lram_8(adv, ADVV_SCSIBUSY_B); + scsi_busy &= ~target_id; + adv_write_lram_8(adv, ADVV_SCSIBUSY_B, scsi_busy); + } else if (int_halt_code == ADV_HALT_SDTR_REJECTED) { + struct sdtr_xmsg out_msg; + + adv_read_lram_16_multi(adv, ADVV_MSGOUT_BEG, + (u_int16_t *) &out_msg, + sizeof(out_msg)/2); + + if ((out_msg.msg_type == MSG_EXTENDED) && + (out_msg.msg_len == MSG_EXT_SDTR_LEN) && + (out_msg.msg_req == MSG_EXT_SDTR)) { + + adv->initiate_sdtr &= ~target_id; + adv->sdtr_done &= ~target_id; + adv_set_chip_sdtr(adv, asyn_sdtr, tid_no); + } + q_cntl &= ~QC_MSG_OUT; + adv_write_lram_8(adv, halt_q_addr + ADV_SCSIQ_B_CNTL, q_cntl); + } else if (int_halt_code == ADV_HALT_SS_QUEUE_FULL) { + u_int8_t cur_dvc_qng; + u_int8_t scsi_status; + + /* + * XXX It would be nice if we could push the responsibility for handling + * this situation onto the generic SCSI layer as other drivers do. + * This would be done by completing the command with the status byte + * set to QUEUE_FULL, whereupon it will request that any transactions + * pending on the target that where scheduled after this one be aborted + * (so as to maintain queue ordering) and the number of requests the + * upper level will attempt to send this target will be reduced. + * + * With this current strategy, am I guaranteed that once I unbusy the + * target the queued up transactions will be sent in the order they + * were queued? If the ASC chip does a round-robin on all queued + * transactions looking for queues to run, the order is not guaranteed. + */ + scsi_status = adv_read_lram_8(adv, halt_q_addr + ADV_SCSIQ_SCSI_STATUS); + cur_dvc_qng = adv_read_lram_8(adv, ADV_QADR_BEG + target_ix); + printf("adv%d: Queue full - target %d, active transactions %d\n", adv->unit, + tid_no, cur_dvc_qng); +#if 0 + /* XXX FIX LATER */ + if ((cur_dvc_qng > 0) && (adv->cur_dvc_qng[tid_no] > 0)) { + scsi_busy = adv_read_lram_8(adv, ADVV_SCSIBUSY_B); + scsi_busy |= target_id; + adv_write_lram_8(adv, ADVV_SCSIBUSY_B, scsi_busy); + asc_dvc->queue_full_or_busy |= target_id; + + if (scsi_status == SS_QUEUE_FULL) { + if (cur_dvc_qng > ASC_MIN_TAGGED_CMD) { + cur_dvc_qng -= 1; + asc_dvc->max_dvc_qng[tid_no] = cur_dvc_qng; + + adv_write_lram_8(adv, ADVV_MAX_DVC_QNG_BEG + tid_no, + cur_dvc_qng); + } + } + } +#endif + } + adv_write_lram_16(adv, ADVV_HALTCODE_W, 0); +} + +/* Internal Routines */ + +static void +adv_read_lram_16_multi(adv, s_addr, buffer, count) + struct adv_softc *adv; + u_int16_t s_addr; + u_int16_t *buffer; + int count; +{ + ADV_OUTW(adv, ADV_LRAM_ADDR, s_addr); + ADV_INSW(adv, ADV_LRAM_DATA, buffer, count); +} + +static void +adv_write_lram_16_multi(adv, s_addr, buffer, count) + struct adv_softc *adv; + u_int16_t s_addr; + u_int16_t *buffer; + int count; +{ + ADV_OUTW(adv, ADV_LRAM_ADDR, s_addr); + ADV_OUTSW(adv, ADV_LRAM_DATA, buffer, count); +} + +static void +adv_mset_lram_16(adv, s_addr, set_value, count) + struct adv_softc *adv; + u_int16_t s_addr; + u_int16_t set_value; + int count; +{ + int i; + + ADV_OUTW(adv, ADV_LRAM_ADDR, s_addr); + for (i = 0; i < count; i++) + ADV_OUTW(adv, ADV_LRAM_DATA, set_value); +} + +static u_int32_t +adv_msum_lram_16(adv, s_addr, count) + struct adv_softc *adv; + u_int16_t s_addr; + int count; +{ + u_int32_t sum; + int i; + + sum = 0; + for (i = 0; i < count; i++, s_addr += 2) + sum += adv_read_lram_16(adv, s_addr); + return (sum); +} + +static int +adv_write_and_verify_lram_16(adv, addr, value) + struct adv_softc *adv; + u_int16_t addr; + u_int16_t value; +{ + int retval; + + retval = 0; + ADV_OUTW(adv, ADV_LRAM_ADDR, addr); + ADV_OUTW(adv, ADV_LRAM_DATA, value); + ADV_OUTW(adv, ADV_LRAM_ADDR, addr); + if (value != ADV_INW(adv, ADV_LRAM_DATA)) + retval = 1; + return (retval); +} + +static u_int32_t +adv_read_lram_32(adv, addr) + struct adv_softc *adv; + u_int16_t addr; +{ + u_int16_t val_low, val_high; + + ADV_OUTW(adv, ADV_LRAM_ADDR, addr); + +#if BYTE_ORDER == BIG_ENDIAN + val_high = ADV_INW(adv, ADV_LRAM_DATA); + val_low = ADV_INW(adv, ADV_LRAM_DATA); +#else + val_low = ADV_INW(adv, ADV_LRAM_DATA); + val_high = ADV_INW(adv, ADV_LRAM_DATA); +#endif + + return (((u_int32_t)val_high << 16) | (u_int32_t)val_low); +} + +static void +adv_write_lram_32(adv, addr, value) + struct adv_softc *adv; + u_int16_t addr; + u_int32_t value; +{ + ADV_OUTW(adv, ADV_LRAM_ADDR, addr); + +#if BYTE_ORDER == BIG_ENDIAN + ADV_OUTW(adv, ADV_LRAM_DATA, (u_int16_t)((value >> 16) & 0xFFFF)); + ADV_OUTW(adv, ADV_LRAM_DATA, (u_int16_t)(value & 0xFFFF)); +#else + ADV_OUTW(adv, ADV_LRAM_DATA, (u_int16_t)(value & 0xFFFF)); + ADV_OUTW(adv, ADV_LRAM_DATA, (u_int16_t)((value >> 16) & 0xFFFF)); +#endif +} + +static void +adv_write_lram_32_multi(adv, s_addr, buffer, count) + struct adv_softc *adv; + u_int16_t s_addr; + u_int32_t *buffer; + int count; +{ + ADV_OUTW(adv, ADV_LRAM_ADDR, s_addr); + ADV_OUTSW(adv, ADV_LRAM_DATA, buffer, count * 2); +} + +static u_int16_t +adv_read_eeprom_16(adv, addr) + struct adv_softc *adv; + u_int8_t addr; +{ + u_int16_t read_wval; + u_int8_t cmd_reg; + + adv_write_eeprom_cmd_reg(adv, ADV_EEPROM_CMD_WRITE_DISABLE); + DELAY(1000); + cmd_reg = addr | ADV_EEPROM_CMD_READ; + adv_write_eeprom_cmd_reg(adv, cmd_reg); + DELAY(1000); + read_wval = ADV_INW(adv, ADV_EEPROM_DATA); + DELAY(1000); + return (read_wval); +} + +static u_int16_t +adv_write_eeprom_16(adv, addr, value) + struct adv_softc *adv; + u_int8_t addr; + u_int16_t value; +{ + u_int16_t read_value; + + read_value = adv_read_eeprom_16(adv, addr); + if (read_value != value) { + adv_write_eeprom_cmd_reg(adv, ADV_EEPROM_CMD_WRITE_ENABLE); + DELAY(1000); + + ADV_OUTW(adv, ADV_EEPROM_DATA, value); + DELAY(1000); + + adv_write_eeprom_cmd_reg(adv, ADV_EEPROM_CMD_WRITE | addr); + DELAY(20 * 1000); + + adv_write_eeprom_cmd_reg(adv, ADV_EEPROM_CMD_WRITE_DISABLE); + DELAY(1000); + read_value = adv_read_eeprom_16(adv, addr); + } + return (read_value); +} + +static int +adv_write_eeprom_cmd_reg(adv, cmd_reg) + struct adv_softc *adv; + u_int8_t cmd_reg; +{ + u_int8_t read_back; + int retry; + + retry = 0; + while (1) { + ADV_OUTB(adv, ADV_EEPROM_CMD, cmd_reg); + DELAY(1000); + read_back = ADV_INB(adv, ADV_EEPROM_CMD); + if (read_back == cmd_reg) { + return (1); + } + if (retry++ > ADV_EEPROM_MAX_RETRY) { + return (0); + } + } +} + +static int +adv_set_eeprom_config_once(adv, eeprom_config) + struct adv_softc *adv; + struct adv_eeprom_config *eeprom_config; +{ + int n_error; + u_int16_t *wbuf; + u_int16_t sum; + u_int8_t s_addr; + u_int8_t cfg_beg; + u_int8_t cfg_end; + + wbuf = (u_int16_t *)eeprom_config; + n_error = 0; + sum = 0; + for (s_addr = 0; s_addr < 2; s_addr++, wbuf++) { + sum += *wbuf; + if (*wbuf != adv_write_eeprom_16(adv, s_addr, *wbuf)) { + n_error++; + } + } + if (adv->type & ADV_VL) { + cfg_beg = ADV_EEPROM_CFG_BEG_VL; + cfg_end = ADV_EEPROM_MAX_ADDR_VL; + } else { + cfg_beg = ADV_EEPROM_CFG_BEG; + cfg_end = ADV_EEPROM_MAX_ADDR; + } + + for (s_addr = cfg_beg; s_addr <= (cfg_end - 1); s_addr++, wbuf++) { + sum += *wbuf; + if (*wbuf != adv_write_eeprom_16(adv, s_addr, *wbuf)) { + n_error++; + } + } + *wbuf = sum; + if (sum != adv_write_eeprom_16(adv, s_addr, sum)) { + n_error++; + } + wbuf = (u_int16_t *)eeprom_config; + for (s_addr = 0; s_addr < 2; s_addr++, wbuf++) { + if (*wbuf != adv_read_eeprom_16(adv, s_addr)) { + n_error++; + } + } + for (s_addr = cfg_beg; s_addr <= cfg_end; s_addr++, wbuf++) { + if (*wbuf != adv_read_eeprom_16(adv, s_addr)) { + n_error++; + } + } + return (n_error); +} + +static u_int32_t +adv_load_microcode(adv, s_addr, mcode_buf, mcode_size) + struct adv_softc *adv; + u_int16_t s_addr; + u_int16_t *mcode_buf; + u_int16_t mcode_size; +{ + u_int32_t chksum; + u_int16_t mcode_lram_size; + u_int16_t mcode_chksum; + + mcode_lram_size = mcode_size >> 1; + /* XXX Why zero the memory just before you write the whole thing?? */ + /* adv_mset_lram_16(adv, s_addr, 0, mcode_lram_size);*/ + adv_write_lram_16_multi(adv, s_addr, mcode_buf, mcode_lram_size); + + chksum = adv_msum_lram_16(adv, s_addr, mcode_lram_size); + mcode_chksum = (u_int16_t)adv_msum_lram_16(adv, ADV_CODE_SEC_BEG, + ((mcode_size - s_addr - ADV_CODE_SEC_BEG) >> 1)); + adv_write_lram_16(adv, ADVV_MCODE_CHKSUM_W, mcode_chksum); + adv_write_lram_16(adv, ADVV_MCODE_SIZE_W, mcode_size); + return (chksum); +} + +static void +adv_init_lram(adv) + struct adv_softc *adv; +{ + u_int8_t i; + u_int16_t s_addr; + + adv_mset_lram_16(adv, ADV_QADR_BEG, 0, + (u_int16_t)((((int)adv->max_openings + 2 + 1) * 64) >> 1)); + + i = ADV_MIN_ACTIVE_QNO; + s_addr = ADV_QADR_BEG + ADV_QBLK_SIZE; + + adv_write_lram_8(adv, s_addr + ADV_SCSIQ_B_FWD, i + 1); + adv_write_lram_8(adv, s_addr + ADV_SCSIQ_B_BWD, adv->max_openings); + adv_write_lram_8(adv, s_addr + ADV_SCSIQ_B_QNO, i); + i++; + s_addr += ADV_QBLK_SIZE; + for (; i < adv->max_openings; i++, s_addr += ADV_QBLK_SIZE) { + adv_write_lram_8(adv, s_addr + ADV_SCSIQ_B_FWD, i + 1); + adv_write_lram_8(adv, s_addr + ADV_SCSIQ_B_BWD, i - 1); + adv_write_lram_8(adv, s_addr + ADV_SCSIQ_B_QNO, i); + } + + adv_write_lram_8(adv, s_addr + ADV_SCSIQ_B_FWD, ADV_QLINK_END); + adv_write_lram_8(adv, s_addr + ADV_SCSIQ_B_BWD, adv->max_openings - 1); + adv_write_lram_8(adv, s_addr + ADV_SCSIQ_B_QNO, adv->max_openings); + i++; + s_addr += ADV_QBLK_SIZE; + + for (; i <= adv->max_openings + 3; i++, s_addr += ADV_QBLK_SIZE) { + adv_write_lram_8(adv, s_addr + ADV_SCSIQ_B_FWD, i); + adv_write_lram_8(adv, s_addr + ADV_SCSIQ_B_BWD, i); + adv_write_lram_8(adv, s_addr + ADV_SCSIQ_B_QNO, i); + } +} + +static int +adv_init_microcode_var(adv) + struct adv_softc *adv; +{ + int i; + + for (i = 0; i <= ADV_MAX_TID; i++) { + adv_write_lram_8(adv, ADVV_SDTR_DATA_BEG + i, + adv->sdtr_data[i]); + } + + adv_init_qlink_var(adv); + + /* XXX Again, what about wide busses??? */ + adv_write_lram_8(adv, ADVV_DISC_ENABLE_B, adv->disc_enable); + adv_write_lram_8(adv, ADVV_HOSTSCSI_ID_B, 0x01 << adv->scsi_id); + + /* What are the extra 8 bytes for?? */ + adv_write_lram_32(adv, ADVV_OVERRUN_PADDR_D, vtophys(&(adv->overrun_buf[0])) + 8); + + adv_write_lram_32(adv, ADVV_OVERRUN_BSIZE_D, ADV_OVERRUN_BSIZE - 8); + +#if 0 + /* If we're going to print anything, RCS ids are more meaningful */ + mcode_date = adv_read_lram_16(adv, ADVV_MC_DATE_W); + mcode_version = adv_read_lram_16(adv, ADVV_MC_VER_W); +#endif + ADV_OUTW(adv, ADV_REG_PROG_COUNTER, ADV_MCODE_START_ADDR); + if (ADV_INW(adv, ADV_REG_PROG_COUNTER) != ADV_MCODE_START_ADDR) { + printf("adv%d: Unable to set program counter. Aborting.\n", adv->unit); + return (1); + } + if (adv_start_chip(adv) != 1) { + printf("adv%d: Unable to start on board processor. Aborting.\n", + adv->unit); + return (1); + } + return (0); +} + +static void +adv_init_qlink_var(adv) + struct adv_softc *adv; +{ + int i; + u_int16_t lram_addr; + + adv_write_lram_8(adv, ADVV_NEXTRDY_B, 1); + adv_write_lram_8(adv, ADVV_DONENEXT_B, adv->max_openings); + + adv_write_lram_16(adv, ADVV_FREE_Q_HEAD_W, 1); + adv_write_lram_16(adv, ADVV_DONE_Q_TAIL_W, adv->max_openings); + + adv_write_lram_8(adv, ADVV_BUSY_QHEAD_B, + (u_int8_t)((int) adv->max_openings + 1)); + adv_write_lram_8(adv, ADVV_DISC1_QHEAD_B, + (u_int8_t)((int) adv->max_openings + 2)); + + adv_write_lram_8(adv, ADVV_TOTAL_READY_Q_B, adv->max_openings); + + adv_write_lram_16(adv, ADVV_ASCDVC_ERR_CODE_W, 0); + adv_write_lram_16(adv, ADVV_HALTCODE_W, 0); + adv_write_lram_8(adv, ADVV_STOP_CODE_B, 0); + adv_write_lram_8(adv, ADVV_SCSIBUSY_B, 0); + adv_write_lram_8(adv, ADVV_WTM_FLAG_B, 0); + + adv_write_lram_8(adv, ADVV_CDBCNT_B, 0); + + lram_addr = ADV_QADR_BEG; + for (i = 0; i < 32; i++, lram_addr += 2) + adv_write_lram_16(adv, lram_addr, 0); +} +static void +adv_disable_interrupt(adv) + struct adv_softc *adv; +{ + u_int16_t cfg; + + cfg = ADV_INW(adv, ADV_CONFIG_LSW); + ADV_OUTW(adv, ADV_CONFIG_LSW, cfg & ~ADV_CFG_LSW_HOST_INT_ON); +} + +static void +adv_enable_interrupt(adv) + struct adv_softc *adv; +{ + u_int16_t cfg; + + cfg = ADV_INW(adv, ADV_CONFIG_LSW); + ADV_OUTW(adv, ADV_CONFIG_LSW, cfg | ADV_CFG_LSW_HOST_INT_ON); +} + +static void +adv_toggle_irq_act(adv) + struct adv_softc *adv; +{ + ADV_OUTW(adv, ADV_CHIP_STATUS, ADV_CIW_IRQ_ACT); + ADV_OUTW(adv, ADV_CHIP_STATUS, 0); +} + +#if UNUSED +static void +adv_start_execution(adv) + struct adv_softc *adv; +{ + if (adv_read_lram_8(adv, ADV_STOP_CODE_B) != 0) { + adv_write_lram_8(adv, ADV_STOP_CODE_B, 0); + } +} +#endif + +static int +adv_start_chip(adv) + struct adv_softc *adv; +{ + ADV_OUTB(adv, ADV_CHIP_CTRL, 0); + if ((ADV_INW(adv, ADV_CHIP_STATUS) & ADV_CSW_HALTED) != 0) + return (0); + return (1); +} + +static int +adv_stop_chip(adv) + struct adv_softc *adv; +{ + u_int8_t cc_val; + + cc_val = ADV_INB(adv, ADV_CHIP_CTRL) + & (~(ADV_CC_SINGLE_STEP | ADV_CC_TEST | ADV_CC_DIAG)); + ADV_OUTB(adv, ADV_CHIP_CTRL, cc_val | ADV_CC_HALT); + adv_set_chip_ih(adv, ADV_INS_HALT); + adv_set_chip_ih(adv, ADV_INS_RFLAG_WTM); + if ((ADV_INW(adv, ADV_CHIP_STATUS) & ADV_CSW_HALTED) == 0) { + return (0); + } + return (1); +} + +static void +adv_set_chip_ih(adv, ins_code) + struct adv_softc *adv; + u_int16_t ins_code; +{ + adv_set_bank(adv, 1); + ADV_OUTW(adv, ADV_REG_IH, ins_code); + adv_set_bank(adv, 0); +} + +static void +adv_set_bank(adv, bank) + struct adv_softc *adv; + u_int8_t bank; +{ + u_int8_t control; + + /* + * Start out with the bank reset to 0 + */ + control = ADV_INB(adv, ADV_CHIP_CTRL) + & (~(ADV_CC_SINGLE_STEP | ADV_CC_TEST + | ADV_CC_DIAG | ADV_CC_SCSI_RESET + | ADV_CC_CHIP_RESET | ADV_CC_BANK_ONE)); + if (bank == 1) { + control |= ADV_CC_BANK_ONE; + } else if (bank == 2) { + control |= ADV_CC_DIAG | ADV_CC_BANK_ONE; + } + ADV_OUTB(adv, ADV_CHIP_CTRL, control); +} + +#if UNUSED +static u_int8_t +adv_get_chip_scsi_ctrl(adv) + struct adv_softc *adv; +{ + u_int8_t scsi_ctrl; + + adv_set_bank(adv, 1); + scsi_ctrl = ADV_INB(adv, ADV_REG_SC); + adv_set_bank(adv, 0); + return (scsi_ctrl); +} +#endif + +static int +adv_sgcount_to_qcount(sgcount) + int sgcount; +{ + int n_sg_list_qs; + + n_sg_list_qs = ((sgcount - 1) / ADV_SG_LIST_PER_Q); + if (((sgcount - 1) % ADV_SG_LIST_PER_Q) != 0) + n_sg_list_qs++; + return (n_sg_list_qs + 1); +} + +/* + * XXX Looks like more padding issues in this routine as well. + * There has to be a way to turn this into an insw. + */ +static void +adv_get_q_info(adv, s_addr, inbuf, words) + struct adv_softc *adv; + u_int16_t s_addr; + u_int16_t *inbuf; + int words; +{ + int i; + + ADV_OUTW(adv, ADV_LRAM_ADDR, s_addr); + for (i = 0; i < words; i++, inbuf++) { + if (i == 5) { + continue; + } + *inbuf = ADV_INW(adv, ADV_LRAM_DATA); + } +} + +static u_int +adv_get_num_free_queues(adv, n_qs) + struct adv_softc *adv; + u_int8_t n_qs; +{ + u_int cur_used_qs; + u_int cur_free_qs; + + if (n_qs == 1) + cur_used_qs = adv->cur_active + + adv->openings_needed + + ADV_MIN_FREE_Q; + else + cur_used_qs = adv->cur_active + + ADV_MIN_FREE_Q; + + if ((cur_used_qs + n_qs) <= adv->max_openings) { + cur_free_qs = adv->max_openings - cur_used_qs; + return (cur_free_qs); + } + if (n_qs > 1) + if (n_qs > adv->openings_needed) + adv->openings_needed = n_qs; + return (0); +} + +static u_int8_t +adv_alloc_free_queues(adv, free_q_head, n_free_q) + struct adv_softc *adv; + u_int8_t free_q_head; + u_int8_t n_free_q; +{ + int i; + + for (i = 0; i < n_free_q; i++) { + free_q_head = adv_alloc_free_queue(adv, free_q_head); + if (free_q_head == ADV_QLINK_END) + break; + } + return (free_q_head); +} + +static u_int8_t +adv_alloc_free_queue(adv, free_q_head) + struct adv_softc *adv; + u_int8_t free_q_head; +{ + u_int16_t q_addr; + u_int8_t next_qp; + u_int8_t q_status; + + next_qp = ADV_QLINK_END; + q_addr = ADV_QNO_TO_QADDR(free_q_head); + q_status = adv_read_lram_8(adv, q_addr + ADV_SCSIQ_B_STATUS); + + if ((q_status & QS_READY) == 0) + next_qp = adv_read_lram_8(adv, q_addr + ADV_SCSIQ_B_FWD); + + return (next_qp); +} + +static int +adv_send_scsi_queue(adv, scsiq, n_q_required) + struct adv_softc *adv; + struct adv_scsi_q *scsiq; + u_int8_t n_q_required; +{ + u_int8_t free_q_head; + u_int8_t next_qp; + u_int8_t tid_no; + u_int8_t target_ix; + int retval; + + retval = 1; + target_ix = scsiq->q2.target_ix; + tid_no = ADV_TIX_TO_TID(target_ix); + free_q_head = adv_read_lram_16(adv, ADVV_FREE_Q_HEAD_W) & 0xFF; + if ((next_qp = adv_alloc_free_queues(adv, free_q_head, n_q_required)) + != ADV_QLINK_END) { + if (n_q_required > 1) { + /* + * Only reset the shortage value when processing + * a "normal" request and not error recovery or + * other requests that dip into our reserved queues. + * Generally speaking, a normal request will need more + * than one queue. + */ + adv->openings_needed = 0; + } + scsiq->q1.q_no = free_q_head; + + /* + * Now that we know our Q number, point our sense + * buffer pointer to an area below 16M if we are + * an ISA adapter. + */ + if (adv->sense_buffers != NULL) + scsiq->q1.sense_addr = (u_int32_t)vtophys(&(adv->sense_buffers[free_q_head])); + adv_put_ready_sg_list_queue(adv, scsiq, free_q_head); + adv_write_lram_16(adv, ADVV_FREE_Q_HEAD_W, next_qp); + adv->cur_active += n_q_required; + retval = 0; + } + return (retval); +} + + +static void +adv_put_ready_sg_list_queue(adv, scsiq, q_no) + struct adv_softc *adv; + struct adv_scsi_q *scsiq; + u_int8_t q_no; +{ + u_int8_t sg_list_dwords; + u_int8_t sg_index, i; + u_int8_t sg_entry_cnt; + u_int8_t next_qp; + u_int16_t q_addr; + struct adv_sg_head *sg_head; + struct adv_sg_list_q scsi_sg_q; + + sg_head = scsiq->sg_head; + + if (sg_head) { + sg_entry_cnt = sg_head->entry_cnt - 1; +#ifdef DIAGNOSTIC + if (sg_entry_cnt == 0) + panic("adv_put_ready_sg_list_queue: ScsiQ with a SG list but only one element"); + if ((scsiq->q1.cntl & QC_SG_HEAD) == 0) + panic("adv_put_ready_sg_list_queue: ScsiQ with a SG list but QC_SG_HEAD not set"); +#endif + q_addr = ADV_QNO_TO_QADDR(q_no); + sg_index = 1; + scsiq->q1.sg_queue_cnt = sg_head->queue_cnt; + scsi_sg_q.sg_head_qp = q_no; + scsi_sg_q.cntl = QCSG_SG_XFER_LIST; + for (i = 0; i < sg_head->queue_cnt; i++) { + u_int8_t segs_this_q; + + if (sg_entry_cnt > ADV_SG_LIST_PER_Q) + segs_this_q = ADV_SG_LIST_PER_Q; + else { + /* This will be the last segment then */ + segs_this_q = sg_entry_cnt; + scsi_sg_q.cntl |= QCSG_SG_XFER_END; + } + scsi_sg_q.seq_no = i + 1; + sg_list_dwords = segs_this_q * 2; + if (i == 0) { + scsi_sg_q.sg_list_cnt = segs_this_q; + scsi_sg_q.sg_cur_list_cnt = segs_this_q; + } else { + scsi_sg_q.sg_list_cnt = segs_this_q - 1; + scsi_sg_q.sg_cur_list_cnt = segs_this_q - 1; + } + next_qp = adv_read_lram_8(adv, q_addr + ADV_SCSIQ_B_FWD); + scsi_sg_q.q_no = next_qp; + q_addr = ADV_QNO_TO_QADDR(next_qp); + + adv_write_lram_16_multi(adv, q_addr + ADV_SCSIQ_SGHD_CPY_BEG, + (u_int16_t *)&scsi_sg_q, + sizeof(scsi_sg_q) >> 1); + adv_write_lram_32_multi(adv, q_addr + ADV_SGQ_LIST_BEG, + (u_int32_t *)&sg_head->sg_list[sg_index], + sg_list_dwords); + sg_entry_cnt -= segs_this_q; + sg_index += ADV_SG_LIST_PER_Q; + } + } + adv_put_ready_queue(adv, scsiq, q_no); +} + +static void +adv_put_ready_queue(adv, scsiq, q_no) + struct adv_softc *adv; + struct adv_scsi_q *scsiq; + u_int8_t q_no; +{ + u_int16_t q_addr; + u_int8_t tid_no; + u_int8_t sdtr_data; + u_int8_t syn_period_ix; + u_int8_t syn_offset; + + if (((adv->initiate_sdtr & scsiq->q1.target_id) != 0) && + ((adv->sdtr_done & scsiq->q1.target_id) == 0)) { + + tid_no = ADV_TIX_TO_TID(scsiq->q2.target_ix); + + sdtr_data = adv_read_lram_8(adv, ADVV_SDTR_DATA_BEG + tid_no); + syn_period_ix = (sdtr_data >> 4) & (ADV_SYN_XFER_NO - 1); + syn_offset = sdtr_data & ADV_SYN_MAX_OFFSET; + adv_msgout_sdtr(adv, adv_sdtr_period_tbl[syn_period_ix], + syn_offset); + + scsiq->q1.cntl |= QC_MSG_OUT; + } + q_addr = ADV_QNO_TO_QADDR(q_no); + + scsiq->q1.status = QS_FREE; + + adv_write_lram_16_multi(adv, q_addr + ADV_SCSIQ_CDB_BEG, + (u_int16_t *)scsiq->cdbptr, + scsiq->q2.cdb_len >> 1); + +#if BYTE_ORDER == BIG_ENDIAN + adv_adj_scsiq_endian(scsiq); +#endif + + adv_put_scsiq(adv, q_addr + ADV_SCSIQ_CPY_BEG, + (u_int16_t *) &scsiq->q1.cntl, + ((sizeof(scsiq->q1) + sizeof(scsiq->q2)) / 2) - 1); + +#if CC_WRITE_IO_COUNT + adv_write_lram_16(adv, q_addr + ADV_SCSIQ_W_REQ_COUNT, + adv->req_count); +#endif + +#if CC_CLEAR_DMA_REMAIN + + adv_write_lram_32(adv, q_addr + ADV_SCSIQ_DW_REMAIN_XFER_ADDR, 0); + adv_write_lram_32(adv, q_addr + ADV_SCSIQ_DW_REMAIN_XFER_CNT, 0); +#endif + + adv_write_lram_16(adv, q_addr + ADV_SCSIQ_B_STATUS, + (scsiq->q1.q_no << 8) | QS_READY); +} + +static void +adv_put_scsiq(adv, s_addr, buffer, words) + struct adv_softc *adv; + u_int16_t s_addr; + u_int16_t *buffer; + int words; +{ + int i; + + /* + * XXX This routine makes *gross* assumptions + * about padding in the data structures. + * Either the data structures should have explicit + * padding members added, or they should have padding + * turned off via compiler attributes depending on + * which yields better overall performance. My hunch + * would be that turning off padding would be the + * faster approach as an outsw is much faster than + * this crude loop and accessing un-aligned data + * members isn't *that* expensive. The other choice + * would be to modify the ASC script so that the + * the adv_scsiq_1 structure can be re-arranged so + * padding isn't required. + */ + ADV_OUTW(adv, ADV_LRAM_ADDR, s_addr); + for (i = 0; i < words; i++, buffer++) { + if (i == 2 || i == 10) { + continue; + } + ADV_OUTW(adv, ADV_LRAM_DATA, *buffer); + } +} + +static u_int8_t +adv_msgout_sdtr(adv, sdtr_period, sdtr_offset) + struct adv_softc *adv; + u_int8_t sdtr_period; + u_int8_t sdtr_offset; +{ + struct sdtr_xmsg sdtr_buf; + + sdtr_buf.msg_type = MSG_EXTENDED; + sdtr_buf.msg_len = MSG_EXT_SDTR_LEN; + sdtr_buf.msg_req = MSG_EXT_SDTR; + sdtr_buf.xfer_period = sdtr_period; + sdtr_offset &= ADV_SYN_MAX_OFFSET; + sdtr_buf.req_ack_offset = sdtr_offset; + adv_write_lram_16_multi(adv, ADVV_MSGOUT_BEG, + (u_int16_t *) &sdtr_buf, + sizeof(sdtr_buf) / 2); + + return (adv_get_card_sync_setting(sdtr_period, sdtr_offset)); +} + +static u_int8_t +adv_get_card_sync_setting(period, offset) + u_int8_t period; + u_int8_t offset; +{ + u_int i; + + if (period >= adv_sdtr_period_tbl[0]) { + for (i = 0; i < sizeof(adv_sdtr_period_tbl); i++) { + if (period <= adv_sdtr_period_tbl[i]) + return ((adv_sdtr_period_tbl[i] << 4) | offset); + } + } + return (0); +} + +static void +adv_set_chip_sdtr(adv, sdtr_data, tid_no) + struct adv_softc *adv; + u_int8_t sdtr_data; + u_int8_t tid_no; +{ + ADV_OUTB(adv, ADV_SYN_OFFSET, sdtr_data); + adv_write_lram_8(adv, ADVV_SDTR_DONE_BEG + tid_no, sdtr_data); +} |