diff options
author | njl <njl@FreeBSD.org> | 2005-02-22 06:34:53 +0000 |
---|---|---|
committer | njl <njl@FreeBSD.org> | 2005-02-22 06:34:53 +0000 |
commit | 4c91c9444e854831f0c6f31609ab97d8629317fe (patch) | |
tree | 562fda36e0d6f8a2a410851fd84d8152e9e42152 /sys/dev/acpica | |
parent | 7cb8584285d7b23026713439d4c82d55c6d92934 (diff) | |
download | FreeBSD-src-4c91c9444e854831f0c6f31609ab97d8629317fe.zip FreeBSD-src-4c91c9444e854831f0c6f31609ab97d8629317fe.tar.gz |
Increase the maximum to wait for a transition from 1 to 10 ms. In some
modes, systems may take longer. If the status values don't match, try
matching just the lowest 8 bits if no bits above 8 are set in the desired
value. The IBM R32 has other bits set in the status register that are
irrelevant to the expected value.
Diffstat (limited to 'sys/dev/acpica')
-rw-r--r-- | sys/dev/acpica/acpi_perf.c | 20 |
1 files changed, 16 insertions, 4 deletions
diff --git a/sys/dev/acpica/acpi_perf.c b/sys/dev/acpica/acpi_perf.c index e7d2e8a..a570e44 100644 --- a/sys/dev/acpica/acpi_perf.c +++ b/sys/dev/acpica/acpi_perf.c @@ -448,15 +448,27 @@ acpi_px_set(device_t dev, const struct cf_setting *set) /* Write the appropriate value to the register. */ PX_SET_REG(sc->perf_ctrl, sc->px_states[i].ctrl_val); - /* Try for up to 1 ms to verify the desired state was selected. */ + /* + * Try for up to 10 ms to verify the desired state was selected. + * This is longer than the standard says (1 ms) but in some modes, + * systems may take longer to respond. + */ sts_val = sc->px_states[i].sts_val; - for (tries = 0; tries < 100; tries++) { + for (tries = 0; tries < 1000; tries++) { status = PX_GET_REG(sc->perf_status); - if (status == sts_val) + + /* + * If we match the status or the desired status is 8 bits + * and matches the relevant bits, assume we succeeded. It + * appears some systems (IBM R32) expect byte-wide access + * even though the standard says the register is 32-bit. + */ + if (status == sts_val || + ((sts_val & ~0xff) == 0 && (status & 0xff) == sts_val)) break; DELAY(10); } - if (tries == 100) { + if (tries == 1000) { device_printf(dev, "Px transition to %d failed\n", sc->px_states[i].core_freq); return (ENXIO); |