Merge ACPICA 20111123.

1 files changed, 1214 insertions, 0 deletions

diff --git a/sys/contrib/dev/acpica/os_specific/service_layers/osunixxf.c b/sys/contrib/dev/acpica/os_specific/service_layers/osunixxf.c
new file mode 100644
index 0000000..fde99d4
--- /dev/null
+++ b/sys/contrib/dev/acpica/os_specific/service_layers/osunixxf.c
@@ -0,0 +1,1214 @@
+/******************************************************************************
+ *
+ * Module Name: osunixxf - UNIX OSL interfaces
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2011, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+
+/*
+ * These interfaces are required in order to compile the ASL compiler and the
+ * various ACPICA tools under Linux or other Unix-like system.
+ *
+ * Note: Use #define __APPLE__ for OS X generation.
+ */
+#include <contrib/dev/acpica/include/acpi.h>
+#include <contrib/dev/acpica/include/accommon.h>
+#include <contrib/dev/acpica/include/amlcode.h>
+#include <contrib/dev/acpica/include/acparser.h>
+#include <contrib/dev/acpica/include/acdebug.h>
+
+#include <stdio.h>
+#include <stdlib.h>
+#include <stdarg.h>
+#include <unistd.h>
+#include <sys/time.h>
+#include <semaphore.h>
+#include <pthread.h>
+#include <errno.h>
+
+#define _COMPONENT          ACPI_OS_SERVICES
+        ACPI_MODULE_NAME    ("osunixxf")
+
+
+extern FILE                    *AcpiGbl_DebugFile;
+FILE                           *AcpiGbl_OutputFile;
+
+
+/* Upcalls to AcpiExec */
+
+ACPI_PHYSICAL_ADDRESS
+AeLocalGetRootPointer (
+    void);
+
+void
+AeTableOverride (
+    ACPI_TABLE_HEADER       *ExistingTable,
+    ACPI_TABLE_HEADER       **NewTable);
+
+typedef void* (*PTHREAD_CALLBACK) (void *);
+
+/* Apple-specific */
+
+#ifdef __APPLE__
+#define sem_destroy         sem_close
+#endif
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsInitialize, AcpiOsTerminate
+ *
+ * PARAMETERS:  None
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Init and terminate. Nothing to do.
+ *
+ *****************************************************************************/
+
+ACPI_STATUS
+AcpiOsInitialize (
+    void)
+{
+
+    AcpiGbl_OutputFile = stdout;
+    return (AE_OK);
+}
+
+
+ACPI_STATUS
+AcpiOsTerminate (
+    void)
+{
+
+    return (AE_OK);
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsGetRootPointer
+ *
+ * PARAMETERS:  None
+ *
+ * RETURN:      RSDP physical address
+ *
+ * DESCRIPTION: Gets the ACPI root pointer (RSDP)
+ *
+ *****************************************************************************/
+
+ACPI_PHYSICAL_ADDRESS
+AcpiOsGetRootPointer (
+    void)
+{
+
+    return (AeLocalGetRootPointer ());
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsPredefinedOverride
+ *
+ * PARAMETERS:  InitVal             - Initial value of the predefined object
+ *              NewVal              - The new value for the object
+ *
+ * RETURN:      Status, pointer to value. Null pointer returned if not
+ *              overriding.
+ *
+ * DESCRIPTION: Allow the OS to override predefined names
+ *
+ *****************************************************************************/
+
+ACPI_STATUS
+AcpiOsPredefinedOverride (
+    const ACPI_PREDEFINED_NAMES *InitVal,
+    ACPI_STRING                 *NewVal)
+{
+
+    if (!InitVal || !NewVal)
+    {
+        return (AE_BAD_PARAMETER);
+    }
+
+    *NewVal = NULL;
+    return (AE_OK);
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsTableOverride
+ *
+ * PARAMETERS:  ExistingTable       - Header of current table (probably
+ *                                    firmware)
+ *              NewTable            - Where an entire new table is returned.
+ *
+ * RETURN:      Status, pointer to new table. Null pointer returned if no
+ *              table is available to override
+ *
+ * DESCRIPTION: Return a different version of a table if one is available
+ *
+ *****************************************************************************/
+
+ACPI_STATUS
+AcpiOsTableOverride (
+    ACPI_TABLE_HEADER       *ExistingTable,
+    ACPI_TABLE_HEADER       **NewTable)
+{
+
+    if (!ExistingTable || !NewTable)
+    {
+        return (AE_BAD_PARAMETER);
+    }
+
+    *NewTable = NULL;
+
+#ifdef ACPI_EXEC_APP
+
+    AeTableOverride (ExistingTable, NewTable);
+    return (AE_OK);
+#else
+
+    return (AE_NO_ACPI_TABLES);
+#endif
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsRedirectOutput
+ *
+ * PARAMETERS:  Destination         - An open file handle/pointer
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Causes redirect of AcpiOsPrintf and AcpiOsVprintf
+ *
+ *****************************************************************************/
+
+void
+AcpiOsRedirectOutput (
+    void                    *Destination)
+{
+
+    AcpiGbl_OutputFile = Destination;
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsPrintf
+ *
+ * PARAMETERS:  fmt, ...            - Standard printf format
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Formatted output
+ *
+ *****************************************************************************/
+
+void ACPI_INTERNAL_VAR_XFACE
+AcpiOsPrintf (
+    const char              *Fmt,
+    ...)
+{
+    va_list                 Args;
+
+
+    va_start (Args, Fmt);
+    AcpiOsVprintf (Fmt, Args);
+    va_end (Args);
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsVprintf
+ *
+ * PARAMETERS:  fmt                 - Standard printf format
+ *              args                - Argument list
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Formatted output with argument list pointer
+ *
+ *****************************************************************************/
+
+void
+AcpiOsVprintf (
+    const char              *Fmt,
+    va_list                 Args)
+{
+    UINT8                   Flags;
+
+
+    Flags = AcpiGbl_DbOutputFlags;
+    if (Flags & ACPI_DB_REDIRECTABLE_OUTPUT)
+    {
+        /* Output is directable to either a file (if open) or the console */
+
+        if (AcpiGbl_DebugFile)
+        {
+            /* Output file is open, send the output there */
+
+            vfprintf (AcpiGbl_DebugFile, Fmt, Args);
+        }
+        else
+        {
+            /* No redirection, send output to console (once only!) */
+
+            Flags |= ACPI_DB_CONSOLE_OUTPUT;
+        }
+    }
+
+    if (Flags & ACPI_DB_CONSOLE_OUTPUT)
+    {
+        vfprintf (AcpiGbl_OutputFile, Fmt, Args);
+    }
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsGetLine
+ *
+ * PARAMETERS:  Buffer              - Where to return the command line
+ *              BufferLength        - Maximum length of Buffer
+ *              BytesRead           - Where the actual byte count is returned
+ *
+ * RETURN:      Status and actual bytes read
+ *
+ * DESCRIPTION: Formatted input with argument list pointer
+ *
+ *****************************************************************************/
+
+ACPI_STATUS
+AcpiOsGetLine (
+    char                    *Buffer,
+    UINT32                  BufferLength,
+    UINT32                  *BytesRead)
+{
+    UINT8                   Temp;
+    UINT32                  i;
+
+
+    for (i = 0; ; i++)
+    {
+        if (i >= BufferLength)
+        {
+            return (AE_BUFFER_OVERFLOW);
+        }
+
+        scanf ("%1c", &Temp);
+        if (!Temp || Temp == '\n')
+        {
+            break;
+        }
+
+        Buffer [i] = Temp;
+    }
+
+    /* Null terminate the buffer */
+
+    Buffer [i] = 0;
+
+    /* Return the number of bytes in the string */
+
+    if (BytesRead)
+    {
+        *BytesRead = i;
+    }
+    return (AE_OK);
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsMapMemory
+ *
+ * PARAMETERS:  where               - Physical address of memory to be mapped
+ *              length              - How much memory to map
+ *
+ * RETURN:      Pointer to mapped memory. Null on error.
+ *
+ * DESCRIPTION: Map physical memory into caller's address space
+ *
+ *****************************************************************************/
+
+void *
+AcpiOsMapMemory (
+    ACPI_PHYSICAL_ADDRESS   where,
+    ACPI_SIZE               length)
+{
+
+    return (ACPI_TO_POINTER ((ACPI_SIZE) where));
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsUnmapMemory
+ *
+ * PARAMETERS:  where               - Logical address of memory to be unmapped
+ *              length              - How much memory to unmap
+ *
+ * RETURN:      None.
+ *
+ * DESCRIPTION: Delete a previously created mapping. Where and Length must
+ *              correspond to a previous mapping exactly.
+ *
+ *****************************************************************************/
+
+void
+AcpiOsUnmapMemory (
+    void                    *where,
+    ACPI_SIZE               length)
+{
+
+    return;
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsAllocate
+ *
+ * PARAMETERS:  Size                - Amount to allocate, in bytes
+ *
+ * RETURN:      Pointer to the new allocation. Null on error.
+ *
+ * DESCRIPTION: Allocate memory. Algorithm is dependent on the OS.
+ *
+ *****************************************************************************/
+
+void *
+AcpiOsAllocate (
+    ACPI_SIZE               size)
+{
+    void                    *Mem;
+
+
+    Mem = (void *) malloc ((size_t) size);
+    return (Mem);
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsFree
+ *
+ * PARAMETERS:  mem                 - Pointer to previously allocated memory
+ *
+ * RETURN:      None.
+ *
+ * DESCRIPTION: Free memory allocated via AcpiOsAllocate
+ *
+ *****************************************************************************/
+
+void
+AcpiOsFree (
+    void                    *mem)
+{
+
+    free (mem);
+}
+
+
+#ifdef ACPI_SINGLE_THREADED
+/******************************************************************************
+ *
+ * FUNCTION:    Semaphore stub functions
+ *
+ * DESCRIPTION: Stub functions used for single-thread applications that do
+ *              not require semaphore synchronization. Full implementations
+ *              of these functions appear after the stubs.
+ *
+ *****************************************************************************/
+
+ACPI_STATUS
+AcpiOsCreateSemaphore (
+    UINT32              MaxUnits,
+    UINT32              InitialUnits,
+    ACPI_HANDLE         *OutHandle)
+{
+    *OutHandle = (ACPI_HANDLE) 1;
+    return (AE_OK);
+}
+
+ACPI_STATUS
+AcpiOsDeleteSemaphore (
+    ACPI_HANDLE         Handle)
+{
+    return (AE_OK);
+}
+
+ACPI_STATUS
+AcpiOsWaitSemaphore (
+    ACPI_HANDLE         Handle,
+    UINT32              Units,
+    UINT16              Timeout)
+{
+    return (AE_OK);
+}
+
+ACPI_STATUS
+AcpiOsSignalSemaphore (
+    ACPI_HANDLE         Handle,
+    UINT32              Units)
+{
+    return (AE_OK);
+}
+
+#else
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsCreateSemaphore
+ *
+ * PARAMETERS:  InitialUnits        - Units to be assigned to the new semaphore
+ *              OutHandle           - Where a handle will be returned
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Create an OS semaphore
+ *
+ *****************************************************************************/
+
+ACPI_STATUS
+AcpiOsCreateSemaphore (
+    UINT32              MaxUnits,
+    UINT32              InitialUnits,
+    ACPI_HANDLE         *OutHandle)
+{
+    sem_t               *Sem;
+
+
+    if (!OutHandle)
+    {
+        return (AE_BAD_PARAMETER);
+    }
+
+#ifdef __APPLE__
+    {
+        char            *SemaphoreName = tmpnam (NULL);
+
+        Sem = sem_open (SemaphoreName, O_EXCL|O_CREAT, 0755, InitialUnits);
+        if (!Sem)
+        {
+            return (AE_NO_MEMORY);
+        }
+        sem_unlink (SemaphoreName); /* This just deletes the name */
+    }
+
+#else
+    Sem = AcpiOsAllocate (sizeof (sem_t));
+    if (!Sem)
+    {
+        return (AE_NO_MEMORY);
+    }
+
+    if (sem_init (Sem, 0, InitialUnits) == -1)
+    {
+        AcpiOsFree (Sem);
+        return (AE_BAD_PARAMETER);
+    }
+#endif
+
+    *OutHandle = (ACPI_HANDLE) Sem;
+    return (AE_OK);
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsDeleteSemaphore
+ *
+ * PARAMETERS:  Handle              - Handle returned by AcpiOsCreateSemaphore
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Delete an OS semaphore
+ *
+ *****************************************************************************/
+
+ACPI_STATUS
+AcpiOsDeleteSemaphore (
+    ACPI_HANDLE         Handle)
+{
+    sem_t               *Sem = (sem_t *) Handle;
+
+
+    if (!Sem)
+    {
+        return (AE_BAD_PARAMETER);
+    }
+
+    if (sem_destroy (Sem) == -1)
+    {
+        return (AE_BAD_PARAMETER);
+    }
+
+    return (AE_OK);
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsWaitSemaphore
+ *
+ * PARAMETERS:  Handle              - Handle returned by AcpiOsCreateSemaphore
+ *              Units               - How many units to wait for
+ *              Timeout             - How long to wait
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Wait for units
+ *
+ *****************************************************************************/
+
+ACPI_STATUS
+AcpiOsWaitSemaphore (
+    ACPI_HANDLE         Handle,
+    UINT32              Units,
+    UINT16              Timeout)
+{
+    ACPI_STATUS         Status = AE_OK;
+    sem_t               *Sem = (sem_t *) Handle;
+    struct timespec     T;
+
+
+    if (!Sem)
+    {
+        return (AE_BAD_PARAMETER);
+    }
+
+    switch (Timeout)
+    {
+    /*
+     * No Wait:
+     * --------
+     * A zero timeout value indicates that we shouldn't wait - just
+     * acquire the semaphore if available otherwise return AE_TIME
+     * (a.k.a. 'would block').
+     */
+    case 0:
+
+        if (sem_trywait(Sem) == -1)
+        {
+            Status = (AE_TIME);
+        }
+        break;
+
+    /* Wait Indefinitely */
+
+    case ACPI_WAIT_FOREVER:
+
+        if (sem_wait (Sem))
+        {
+            Status = (AE_TIME);
+        }
+        break;
+
+    /* Wait with Timeout */
+
+    default:
+
+        T.tv_sec = Timeout / 1000;
+        T.tv_nsec = (Timeout - (T.tv_sec * 1000)) * 1000000;
+
+#ifdef ACPI_USE_ALTERNATE_TIMEOUT
+        /*
+         * Alternate timeout mechanism for environments where
+         * sem_timedwait is not available or does not work properly.
+         */
+        while (Timeout)
+        {
+            if (sem_trywait (Sem) == 0)
+            {
+                /* Got the semaphore */
+                return (AE_OK);
+            }
+            usleep (1000);  /* one millisecond */
+            Timeout--;
+        }
+        Status = (AE_TIME);
+#else
+
+        if (sem_timedwait (Sem, &T))
+        {
+            Status = (AE_TIME);
+        }
+#endif
+
+        break;
+    }
+
+    return (Status);
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsSignalSemaphore
+ *
+ * PARAMETERS:  Handle              - Handle returned by AcpiOsCreateSemaphore
+ *              Units               - Number of units to send
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Send units
+ *
+ *****************************************************************************/
+
+ACPI_STATUS
+AcpiOsSignalSemaphore (
+    ACPI_HANDLE         Handle,
+    UINT32              Units)
+{
+    sem_t               *Sem = (sem_t *)Handle;
+
+
+    if (!Sem)
+    {
+        return (AE_BAD_PARAMETER);
+    }
+
+    if (sem_post (Sem) == -1)
+    {
+        return (AE_LIMIT);
+    }
+
+    return (AE_OK);
+}
+
+#endif /* ACPI_SINGLE_THREADED */
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    Spinlock interfaces
+ *
+ * DESCRIPTION: Map these interfaces to semaphore interfaces
+ *
+ *****************************************************************************/
+
+ACPI_STATUS
+AcpiOsCreateLock (
+    ACPI_SPINLOCK           *OutHandle)
+{
+
+    return (AcpiOsCreateSemaphore (1, 1, OutHandle));
+}
+
+
+void
+AcpiOsDeleteLock (
+    ACPI_SPINLOCK           Handle)
+{
+    AcpiOsDeleteSemaphore (Handle);
+}
+
+
+ACPI_CPU_FLAGS
+AcpiOsAcquireLock (
+    ACPI_HANDLE             Handle)
+{
+    AcpiOsWaitSemaphore (Handle, 1, 0xFFFF);
+    return (0);
+}
+
+
+void
+AcpiOsReleaseLock (
+    ACPI_SPINLOCK           Handle,
+    ACPI_CPU_FLAGS          Flags)
+{
+    AcpiOsSignalSemaphore (Handle, 1);
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsInstallInterruptHandler
+ *
+ * PARAMETERS:  InterruptNumber     - Level handler should respond to.
+ *              Isr                 - Address of the ACPI interrupt handler
+ *              ExceptPtr           - Where status is returned
+ *
+ * RETURN:      Handle to the newly installed handler.
+ *
+ * DESCRIPTION: Install an interrupt handler. Used to install the ACPI
+ *              OS-independent handler.
+ *
+ *****************************************************************************/
+
+UINT32
+AcpiOsInstallInterruptHandler (
+    UINT32                  InterruptNumber,
+    ACPI_OSD_HANDLER        ServiceRoutine,
+    void                    *Context)
+{
+
+    return (AE_OK);
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsRemoveInterruptHandler
+ *
+ * PARAMETERS:  Handle              - Returned when handler was installed
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Uninstalls an interrupt handler.
+ *
+ *****************************************************************************/
+
+ACPI_STATUS
+AcpiOsRemoveInterruptHandler (
+    UINT32                  InterruptNumber,
+    ACPI_OSD_HANDLER        ServiceRoutine)
+{
+
+    return (AE_OK);
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsStall
+ *
+ * PARAMETERS:  microseconds        - Time to sleep
+ *
+ * RETURN:      Blocks until sleep is completed.
+ *
+ * DESCRIPTION: Sleep at microsecond granularity
+ *
+ *****************************************************************************/
+
+void
+AcpiOsStall (
+    UINT32                  microseconds)
+{
+
+    if (microseconds)
+    {
+        usleep (microseconds);
+    }
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsSleep
+ *
+ * PARAMETERS:  milliseconds        - Time to sleep
+ *
+ * RETURN:      Blocks until sleep is completed.
+ *
+ * DESCRIPTION: Sleep at millisecond granularity
+ *
+ *****************************************************************************/
+
+void
+AcpiOsSleep (
+    UINT64                  milliseconds)
+{
+
+    sleep (milliseconds / 1000);    /* Sleep for whole seconds */
+
+    /*
+     * Arg to usleep() must be less than 1,000,000 (1 second)
+     */
+    usleep ((milliseconds % 1000) * 1000);      /* Sleep for remaining usecs */
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsGetTimer
+ *
+ * PARAMETERS:  None
+ *
+ * RETURN:      Current time in 100 nanosecond units
+ *
+ * DESCRIPTION: Get the current system time
+ *
+ *****************************************************************************/
+
+UINT64
+AcpiOsGetTimer (
+    void)
+{
+    struct timeval          time;
+
+
+    gettimeofday (&time, NULL);
+
+    /* Seconds * 10^7 = 100ns(10^-7), Microseconds(10^-6) * 10^1 = 100ns */
+
+    return (((UINT64) time.tv_sec * 10000000) + ((UINT64) time.tv_usec * 10));
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsReadPciConfiguration
+ *
+ * PARAMETERS:  PciId               - Seg/Bus/Dev
+ *              Register            - Device Register
+ *              Value               - Buffer where value is placed
+ *              Width               - Number of bits
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Read data from PCI configuration space
+ *
+ *****************************************************************************/
+
+ACPI_STATUS
+AcpiOsReadPciConfiguration (
+    ACPI_PCI_ID             *PciId,
+    UINT32                  Register,
+    UINT64                  *Value,
+    UINT32                  Width)
+{
+
+    return (AE_OK);
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsWritePciConfiguration
+ *
+ * PARAMETERS:  PciId               - Seg/Bus/Dev
+ *              Register            - Device Register
+ *              Value               - Value to be written
+ *              Width               - Number of bits
+ *
+ * RETURN:      Status.
+ *
+ * DESCRIPTION: Write data to PCI configuration space
+ *
+ *****************************************************************************/
+
+ACPI_STATUS
+AcpiOsWritePciConfiguration (
+    ACPI_PCI_ID             *PciId,
+    UINT32                  Register,
+    UINT64                  Value,
+    UINT32                  Width)
+{
+
+    return (AE_OK);
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsReadPort
+ *
+ * PARAMETERS:  Address             - Address of I/O port/register to read
+ *              Value               - Where value is placed
+ *              Width               - Number of bits
+ *
+ * RETURN:      Value read from port
+ *
+ * DESCRIPTION: Read data from an I/O port or register
+ *
+ *****************************************************************************/
+
+ACPI_STATUS
+AcpiOsReadPort (
+    ACPI_IO_ADDRESS         Address,
+    UINT32                  *Value,
+    UINT32                  Width)
+{
+
+    switch (Width)
+    {
+    case 8:
+        *Value = 0xFF;
+        break;
+
+    case 16:
+        *Value = 0xFFFF;
+        break;
+
+    case 32:
+        *Value = 0xFFFFFFFF;
+        break;
+
+    default:
+        return (AE_BAD_PARAMETER);
+    }
+
+    return (AE_OK);
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsWritePort
+ *
+ * PARAMETERS:  Address             - Address of I/O port/register to write
+ *              Value               - Value to write
+ *              Width               - Number of bits
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Write data to an I/O port or register
+ *
+ *****************************************************************************/
+
+ACPI_STATUS
+AcpiOsWritePort (
+    ACPI_IO_ADDRESS         Address,
+    UINT32                  Value,
+    UINT32                  Width)
+{
+
+    return (AE_OK);
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsReadMemory
+ *
+ * PARAMETERS:  Address             - Physical Memory Address to read
+ *              Value               - Where value is placed
+ *              Width               - Number of bits
+ *
+ * RETURN:      Value read from physical memory address
+ *
+ * DESCRIPTION: Read data from a physical memory address
+ *
+ *****************************************************************************/
+
+ACPI_STATUS
+AcpiOsReadMemory (
+    ACPI_PHYSICAL_ADDRESS   Address,
+    UINT32                  *Value,
+    UINT32                  Width)
+{
+
+    switch (Width)
+    {
+    case 8:
+    case 16:
+    case 32:
+        *Value = 0;
+        break;
+
+    default:
+        return (AE_BAD_PARAMETER);
+    }
+    return (AE_OK);
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsWriteMemory
+ *
+ * PARAMETERS:  Address             - Physical Memory Address to write
+ *              Value               - Value to write
+ *              Width               - Number of bits
+ *
+ * RETURN:      None
+ *
+ * DESCRIPTION: Write data to a physical memory address
+ *
+ *****************************************************************************/
+
+ACPI_STATUS
+AcpiOsWriteMemory (
+    ACPI_PHYSICAL_ADDRESS   Address,
+    UINT32                  Value,
+    UINT32                  Width)
+{
+
+    return (AE_OK);
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsReadable
+ *
+ * PARAMETERS:  Pointer             - Area to be verified
+ *              Length              - Size of area
+ *
+ * RETURN:      TRUE if readable for entire length
+ *
+ * DESCRIPTION: Verify that a pointer is valid for reading
+ *
+ *****************************************************************************/
+
+BOOLEAN
+AcpiOsReadable (
+    void                    *Pointer,
+    ACPI_SIZE               Length)
+{
+
+    return (TRUE);
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsWritable
+ *
+ * PARAMETERS:  Pointer             - Area to be verified
+ *              Length              - Size of area
+ *
+ * RETURN:      TRUE if writable for entire length
+ *
+ * DESCRIPTION: Verify that a pointer is valid for writing
+ *
+ *****************************************************************************/
+
+BOOLEAN
+AcpiOsWritable (
+    void                    *Pointer,
+    ACPI_SIZE               Length)
+{
+
+    return (TRUE);
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsSignal
+ *
+ * PARAMETERS:  Function            - ACPI CA signal function code
+ *              Info                - Pointer to function-dependent structure
+ *
+ * RETURN:      Status
+ *
+ * DESCRIPTION: Miscellaneous functions. Example implementation only.
+ *
+ *****************************************************************************/
+
+ACPI_STATUS
+AcpiOsSignal (
+    UINT32                  Function,
+    void                    *Info)
+{
+
+    switch (Function)
+    {
+    case ACPI_SIGNAL_FATAL:
+        break;
+
+    case ACPI_SIGNAL_BREAKPOINT:
+        break;
+
+    default:
+        break;
+    }
+
+    return (AE_OK);
+}
+
+/* Optional multi-thread support */
+
+#ifndef ACPI_SINGLE_THREADED
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsGetThreadId
+ *
+ * PARAMETERS:  None
+ *
+ * RETURN:      Id of the running thread
+ *
+ * DESCRIPTION: Get the ID of the current (running) thread
+ *
+ *****************************************************************************/
+
+ACPI_THREAD_ID
+AcpiOsGetThreadId (
+    void)
+{
+    pthread_t               thread;
+
+
+    thread = pthread_self();
+    return (ACPI_CAST_PTHREAD_T (thread));
+}
+
+
+/******************************************************************************
+ *
+ * FUNCTION:    AcpiOsExecute
+ *
+ * PARAMETERS:  Type                - Type of execution
+ *              Function            - Address of the function to execute
+ *              Context             - Passed as a parameter to the function
+ *
+ * RETURN:      Status.
+ *
+ * DESCRIPTION: Execute a new thread
+ *
+ *****************************************************************************/
+
+ACPI_STATUS
+AcpiOsExecute (
+    ACPI_EXECUTE_TYPE       Type,
+    ACPI_OSD_EXEC_CALLBACK  Function,
+    void                    *Context)
+{
+    pthread_t               thread;
+    int                     ret;
+
+
+    ret = pthread_create (&thread, NULL, (PTHREAD_CALLBACK) Function, Context);
+    if (ret)
+    {
+        AcpiOsPrintf("Create thread failed");
+    }
+    return (0);
+}
+
+#endif /* ACPI_SINGLE_THREADED */