Fix a bunch of errors (spelling and similar).

As des noted, the section on SCTP would benefit from
a rewrite by a native speaker (which I am not).
Any volunteers?

Approved by:	des (mentor)
MFC after:	1 week

1 files changed, 24 insertions, 26 deletions

diff --git a/sys/conf/NOTES b/sys/conf/NOTES
index 2cf18f1..0a44e1c 100644
--- a/sys/conf/NOTES
+++ b/sys/conf/NOTES
@@ -195,7 +195,7 @@ options 	ROOTDEVNAME=\"ufs:da0s2e\"
 # workloads on SMP machines.  It supports cpu-affinity, per-cpu runqueues
 # and scheduler locks.  It also has a stronger notion of interactivity 
 # which leads to better responsiveness even on uniprocessor machines.  This
-# will eventually become the default scheduler.
+# is the default scheduler.
 #
 # SCHED_STATS is a debugging option which keeps some stats in the sysctl
 # tree at 'kern.sched.stats' and is useful for debugging scheduling decisions.
@@ -501,7 +501,7 @@ options 	REGRESSION
 #options 	RESTARTABLE_PANICS
 
 #
-# This option let some drivers co-exist that can't co-exist in a running
+# This option lets some drivers co-exist that can't co-exist in a running
 # system.  This is used to be able to compile all kernel code in one go for
 # quality assurance purposes (like this file, which the option takes it name
 # from.)
@@ -521,7 +521,7 @@ options 	STACK
 
 #
 # The hwpmc driver that allows the use of in-CPU performance monitoring
-# counters for performance monitoring.  The base kernel needs to configured
+# counters for performance monitoring.  The base kernel needs to be configured
 # with the 'options' line, while the hwpmc device can be either compiled
 # in or loaded as a loadable kernel module.
 #
@@ -592,12 +592,12 @@ options 	FLOWTABLE
 # soon to have a new base RFC and many many more
 # extensions. This release supports all the extensions
 # including many drafts (most about to become RFC's).
-# It is the premeier SCTP implementation in the NET
+# It is the reference implementation of SCTP
 # and is quite well tested.
 #
 # Note YOU MUST have both INET and INET6 defined.
-# you don't have to enable V6, but SCTP is 
-# dual stacked and so far we have not teased apart
+# You don't have to enable V6, but SCTP is 
+# dual stacked and so far we have not torn apart
 # the V6 and V4.. since an association can span
 # both a V6 and V4 address at the SAME time :-)
 #
@@ -605,7 +605,7 @@ options 	SCTP
 # There are bunches of options:
 # this one turns on all sorts of
 # nastly printing that you can
-# do. Its all controled by a
+# do. It's all controlled by a
 # bit mask (settable by socket opt and
 # by sysctl). Including will not cause
 # logging until you set the bits.. but it
@@ -615,9 +615,9 @@ options 	SCTP
 # faster.. if you are not debugging don't use.
 options 	SCTP_DEBUG
 #
-# This option turns off the CRC32c checksum. Basically
-# You will not be able to talk to anyone else that
-# has not done this. Its more for expermentation to
+# This option turns off the CRC32c checksum. Basically,
+# you will not be able to talk to anyone else who
+# has not done this. Its more for experimentation to
 # see how much CPU the CRC32c really takes. Most new
 # cards for TCP support checksum offload.. so this 
 # option gives you a "view" into what SCTP would be
@@ -636,13 +636,13 @@ options 	SCTP_WITH_NO_CSUM
 # see. I have used this to produce interesting 
 # charts and graphs as well :->
 # 
-# I have not yet commited the tools to get and print
+# I have not yet committed the tools to get and print
 # the logs, I will do that eventually .. before then
 # if you want them send me an email rrs@freebsd.org
 # You basically must have ktr(4) enabled for these
 # and you then set the sysctl to turn on/off various
 # logging bits. Use ktrdump(8) to pull the log and run
-# it through a dispaly program.. and graphs and other
+# it through a display program.. and graphs and other
 # things too.
 #
 options 	SCTP_LOCK_LOGGING
@@ -798,8 +798,7 @@ device		sppp
 
 #  The `bpf' device enables the Berkeley Packet Filter.  Be
 #  aware of the legal and administrative consequences of enabling this
-#  option.  The number of devices determines the maximum number of
-#  simultaneous BPF clients programs runnable.  DHCP requires bpf.
+#  option.  DHCP requires bpf.
 device		bpf
 
 #  The `disc' device implements a minimal network interface,
@@ -938,7 +937,7 @@ options 	TCPDEBUG
 options 	MBUF_STRESS_TEST
 options 	MBUF_PROFILING
 
-# Statically Link in accept filters
+# Statically link in accept filters
 options 	ACCEPT_FILTER_DATA
 options 	ACCEPT_FILTER_DNS
 options 	ACCEPT_FILTER_HTTP
@@ -996,7 +995,7 @@ options 	NFSSERVER		#Network File System server
 options 	NFSLOCKD		#Network Lock Manager
 options 	NFSCL			#experimental NFS client with NFSv4
 options 	NFSD			#experimental NFS server with NFSv4
-options 	KGSSAPI			#Kernel GSSAPI implementaion
+options 	KGSSAPI			#Kernel GSSAPI implementation
 
 # NT File System. Read-mostly, see mount_ntfs(8) for details.
 # For a full read-write NTFS support consider sysutils/fusefs-ntfs
@@ -1059,7 +1058,7 @@ options 	QUOTA			#enable disk quotas
 # if you let these users run programs, so confine it to file-servers
 # (but it'll save you lots of headaches in those cases). Root owned
 # directories are exempt and X bits are cleared. The suid bit must be
-# set on the directory as well; see chmod(1) PC owners can't see/set
+# set on the directory as well; see chmod(1). PC owners can't see/set
 # ownerships so they keep getting their toes trodden on. This saves
 # you all the support calls as the filesystem it's used on will act as
 # they expect: "It's my dir so it must be my file".
@@ -1338,8 +1337,7 @@ options 	SCSI_PT_DEFAULT_TIMEOUT=60
 #
 # Normally disabled because a lot of newer SCSI disks report themselves
 # as having SES capabilities, but this can then clot up attempts to build
-# build a topology with the SES device that's on the box these drives
-# are in....
+# a topology with the SES device that's on the box these drives are in....
 options 	SES_ENABLE_PASSTHROUGH
 
 
@@ -1601,7 +1599,7 @@ options 	ISP_DEFAULT_ROLES=2
 #                           instruments are enabled.  The tools in
 #                           /usr/sbin/dpt_* assume these to be enabled.
 #   DPT_HANDLE_TIMEOUTS     Normally device timeouts are handled by the DPT.
-#                           If you ant the driver to handle timeouts, enable
+#                           If you want the driver to handle timeouts, enable
 #                           this option.  If your system is very busy, this
 #                           option will create more trouble than solve.
 #   DPT_TIMEOUT_FACTOR      Used to compute the excessive amount of time to
@@ -1747,7 +1745,7 @@ hint.ata.1.irq="15"
 # ATA_CAM:		Turn ata(4) subsystem controller drivers into cam(4)
 #			interface modules. This deprecates all ata(4)
 #			peripheral device drivers (atadisk, ataraid, atapicd,
-#			atapifd. atapist, atapicam) and all user-level APIs.
+#			atapifd, atapist, atapicam) and all user-level APIs.
 #			cam(4) drivers and APIs will be connected instead.
 
 options 	ATA_STATIC_ID
@@ -1822,7 +1820,7 @@ options 	BREAK_TO_DEBUGGER	# A BREAK on a serial console goes to
 
 # Solaris implements a new BREAK which is initiated by a character
 # sequence CR ~ ^b which is similar to a familiar pattern used on
-# Sun servers by the Remote Console.  There are FreeBSD extentions:
+# Sun servers by the Remote Console.  There are FreeBSD extensions:
 # CR ~ ^p requests force panic and CR ~ ^r requests a clean reboot.
 options 	ALT_BREAK_TO_DEBUGGER
 
@@ -2189,7 +2187,7 @@ device		sound
 #
 # snd_*: Device-specific drivers.
 #
-# The flags of the device tells the device a bit more info about the
+# The flags of the device tell the device a bit more info about the
 # device that normally is obtained through the PnP interface.
 #	bit  2..0   secondary DMA channel;
 #	bit  4      set if the board uses two dma channels;
@@ -2386,7 +2384,7 @@ device		cmx
 # crystal, e.g. some new Bt878 cards.
 #
 # options 	BKTR_GPIO_ACCESS
-# This enable IOCTLs which give user level access to the GPIO port.
+# This enables IOCTLs which give user level access to the GPIO port.
 #
 # options 	BKTR_NO_MSP_RESET
 # Prevents the MSP34xx reset. Good if you initialise the MSP in another OS first
@@ -2594,7 +2592,7 @@ options 	NSFBUFS=1024
 
 #
 # Enable extra debugging code for locks.  This stores the filename and
-# line of whatever acquired the lock in the lock itself, and change a
+# line of whatever acquired the lock in the lock itself, and changes a
 # number of function calls to pass around the relevant data.  This is
 # not at all useful unless you are debugging lock code.  Also note
 # that it is likely to break e.g. fstat(1) unless you recompile your
@@ -2870,7 +2868,7 @@ options 	NSWBUF_MIN=120
 #####################################################################
 
 # More undocumented options for linting.
-# Note that documenting these are not considered an affront.
+# Note that documenting these is not considered an affront.
 
 options 	CAM_DEBUG_DELAY