CAM Transport Layer (XPT).

Submitted by:	The CAM Team

1 files changed, 165 insertions, 0 deletions

diff --git a/sys/cam/cam.h b/sys/cam/cam.h
new file mode 100644
index 0000000..21aea02
--- /dev/null
+++ b/sys/cam/cam.h
@@ -0,0 +1,165 @@
+/*
+ * Data structures and definitions for the CAM system.
+ *
+ * Copyright (c) 1997 Justin T. Gibbs.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification, immediately at the beginning of the file.
+ * 2. The name of the author may not be used to endorse or promote products
+ *    derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
+ * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *      $Id$
+ */
+
+#ifndef _CAM_CAM_H
+#define _CAM_CAM_H 1
+
+#ifdef KERNEL
+#include <opt_cam.h>
+#endif /* KERNEL */
+
+#include <sys/cdefs.h>
+
+typedef u_int path_id_t;
+typedef u_int target_id_t;
+typedef u_int lun_id_t;
+
+#define	CAM_XPT_PATH_ID	((path_id_t)~0)
+#define	CAM_BUS_WILDCARD ((path_id_t)~0)
+#define	CAM_TARGET_WILDCARD ((target_id_t)~0)
+#define	CAM_LUN_WILDCARD ((lun_id_t)~0)
+
+/*
+ * Maximum length for a CAM CDB.  
+ */
+#define CAM_MAX_CDBLEN 16
+
+/*
+ * Definition of a CAM peripheral driver entry.  Peripheral drivers instantiate
+ * one of these for each device they wish to communicate with and pass it into
+ * the xpt layer when they wish to schedule work on that device via the
+ * xpt_schecule API.
+ */
+struct cam_periph;
+
+/*
+ * Priority information for a CAM structure.  The generation number is
+ * incremented everytime a new entry is entered into the queue giving round
+ * robin per priority level scheduling.
+ */
+typedef struct {
+	u_int32_t priority;
+#define CAM_PRIORITY_NONE	(u_int32_t)-1
+	u_int32_t generation;
+	int       index;
+#define CAM_UNQUEUED_INDEX	-1
+#define CAM_ACTIVE_INDEX	-2	
+#define CAM_DONEQ_INDEX		-3	
+} cam_pinfo;
+
+/* CAM flags */
+typedef enum {
+	CAM_FLAG_NONE		= 0x00,
+	CAM_EXPECT_INQ_CHANGE	= 0x01
+} cam_flags;
+
+/* CAM  Status field values */
+typedef enum {
+	CAM_REQ_INPROG,		/* CCB request is in progress */
+	CAM_REQ_CMP,		/* CCB request completed without error */
+	CAM_REQ_ABORTED,	/* CCB request aborted by the host */
+	CAM_UA_ABORT,		/* Unable to abort CCB request */
+	CAM_REQ_CMP_ERR,	/* CCB request completed with an error */
+	CAM_BUSY,		/* CAM subsytem is busy */
+	CAM_REQ_INVALID,	/* CCB request was invalid */
+	CAM_PATH_INVALID,	/* Supplied Path ID is invalid */
+	CAM_DEV_NOT_THERE,	/* SCSI Device Not Installed/there */
+	CAM_UA_TERMIO,		/* Unable to terminate I/O CCB request */
+	CAM_SEL_TIMEOUT,	/* Target Selection Timeout */
+	CAM_CMD_TIMEOUT,	/* Command timeout */
+	CAM_SCSI_STATUS_ERROR,	/* SCSI error, look at error code in CCB */
+	CAM_MSG_REJECT_REC,	/* Message Reject Reveived */
+	CAM_SCSI_BUS_RESET,	/* SCSI Bus Reset Sent/Received */
+	CAM_UNCOR_PARITY,	/* Uncorrectable parity error occurred */
+	CAM_AUTOSENSE_FAIL = 0x10,/* Autosense: request sense cmd fail */
+	CAM_NO_HBA,		/* No HBA Detected error */
+	CAM_DATA_RUN_ERR,	/* Data Overrun error */
+	CAM_UNEXP_BUSFREE,	/* Unexpected Bus Free */
+	CAM_SEQUENCE_FAIL,	/* Target Bus Phase Sequence Failure */
+	CAM_CCB_LEN_ERR,	/* CCB length supplied is inadequate */
+	CAM_PROVIDE_FAIL,	/* Unable to provide requested capability */
+	CAM_BDR_SENT,		/* A SCSI BDR msg was sent to target */
+	CAM_REQ_TERMIO,		/* CCB request terminated by the host */
+	CAM_UNREC_HBA_ERROR,	/* Unrecoverable Host Bus Adapter Error */
+	CAM_REQ_TOO_BIG,	/* The request was too large for this host */
+	CAM_REQUEUE_REQ,	/*
+				 * This request should be requeued to preserve
+				 * transaction ordering.  This typically occurs
+				 * when the SIM recognizes an error that should
+				 * freeze the queue and must place additional
+				 * requests for the target at the sim level
+				 * back into the XPT queue.
+				 */
+	CAM_IDE = 0x33,		/* Initiator Detected Error */
+	CAM_RESRC_UNAVAIL,	/* Resource Unavailable */
+	CAM_UNACKED_EVENT,	/* Unacknowledged Event by Host */
+	CAM_MESSAGE_RECV,	/* Message Received in Host Target Mode */
+	CAM_INVALID_CDB,	/* Invalid CDB received in Host Target Mode */
+	CAM_LUN_INVALID,	/* Lun supplied is invalid */
+	CAM_TID_INVALID,	/* Target ID supplied is invalid */
+	CAM_FUNC_NOTAVAIL,	/* The requested function is not available */
+	CAM_NO_NEXUS,		/* Nexus is not established */
+	CAM_IID_INVALID,	/* The initiator ID is invalid */
+	CAM_CDB_RECVD,		/* The SCSI CDB has been received */
+	CAM_LUN_ALRDY_ENA,	/* The LUN is already eanbeld for target mode */
+	CAM_SCSI_BUSY,		/* SCSI Bus Busy */
+
+	CAM_DEV_QFRZN = 0x40,	/* The DEV queue is frozen w/this err */
+
+				/* Autosense data valid for target */
+	CAM_AUTOSNS_VALID = 0x80,
+	CAM_RELEASE_SIMQ = 0x100,/* SIM ready to take more commands */
+	CAM_SIM_QUEUED   = 0x200,/* SIM has this command in it's queue */
+
+	CAM_STATUS_MASK = 0x3F,	/* Mask bits for just the status # */
+} cam_status;
+
+__BEGIN_DECLS
+typedef int (cam_quirkmatch_t)(caddr_t, caddr_t);
+
+caddr_t	cam_quirkmatch(caddr_t target, caddr_t quirk_table, int num_entries,
+		       int entry_size, cam_quirkmatch_t *comp_func);
+
+void	cam_strvis(u_int8_t *dst, const u_int8_t *src, int srclen, int dstlen);
+
+int	cam_strmatch(const u_int8_t *str, const u_int8_t *pattern, int str_len);
+__END_DECLS
+
+#ifdef KERNEL
+static __inline void cam_init_pinfo(cam_pinfo *pinfo);
+
+static __inline void cam_init_pinfo(cam_pinfo *pinfo)
+{
+	pinfo->priority = CAM_PRIORITY_NONE;	
+	pinfo->index = CAM_UNQUEUED_INDEX;
+}
+#endif /* KERNEL */
+
+#endif /* _CAM_CAM_H */