MFi386: Use C (and CPP) style comments for assembler-with-cpp

sources, for lines that start with a comment.

2 files changed, 290 insertions, 290 deletions

diff --git a/sys/boot/pc98/btx/btx/btx.S b/sys/boot/pc98/btx/btx/btx.S
index 20dfc27..9100eb3 100644
--- a/sys/boot/pc98/btx/btx/btx.S
+++ b/sys/boot/pc98/btx/btx/btx.S
@@ -1,23 +1,23 @@
-#
-# Copyright (c) 1998 Robert Nordier
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms are freely
-# permitted provided that the above copyright notice and this
-# paragraph and the following disclaimer are duplicated in all
-# such forms.
-#
-# This software is provided "AS IS" and without any express or
-# implied warranties, including, without limitation, the implied
-# warranties of merchantability and fitness for a particular
-# purpose.
-#
+/*
+ * Copyright (c) 1998 Robert Nordier
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms are freely
+ * permitted provided that the above copyright notice and this
+ * paragraph and the following disclaimer are duplicated in all
+ * such forms.
+ *
+ * This software is provided "AS IS" and without any express or
+ * implied warranties, including, without limitation, the implied
+ * warranties of merchantability and fitness for a particular
+ * purpose.
+ *
+ * $FreeBSD$
+ */
 
-# $FreeBSD$
-
-#
-# Memory layout.
-#
+/*
+ * Memory layout.
+ */
 		.set MEM_BTX,0x1000		# Start of BTX memory
 		.set MEM_ESP0,0x1800		# Supervisor stack
 		.set MEM_BUF,0x1800		# Scratch buffer
@@ -29,14 +29,14 @@
 		.set MEM_TBL,0x5000		# Page tables
 		.set MEM_ORG,0x9000		# BTX code
 		.set MEM_USR,0xa000		# Start of user memory
-#
-# Paging control.
-#
+/*
+ * Paging control.
+ */
 		.set PAG_SIZ,0x1000		# Page size
 		.set PAG_CNT,0x1000		# Pages to map
-#
-# Segment selectors.
-#
+/*
+ * Segment selectors.
+ */
 		.set SEL_SCODE,0x8		# Supervisor code
 		.set SEL_SDATA,0x10		# Supervisor data
 		.set SEL_RCODE,0x18		# Real mode code
@@ -44,33 +44,33 @@
 		.set SEL_UCODE,0x28|3		# User code
 		.set SEL_UDATA,0x30|3		# User data
 		.set SEL_TSS,0x38		# TSS
-#
-# Task state segment fields.
-#
+/*
+ * Task state segment fields.
+ */
 		.set TSS_ESP0,0x4		# PL 0 ESP
 		.set TSS_SS0,0x8		# PL 0 SS
 		.set TSS_ESP1,0xc		# PL 1 ESP
 		.set TSS_MAP,0x66		# I/O bit map base
-#
-# System calls.
-#
+/*
+ * System calls.
+ */
 		.set SYS_EXIT,0x0		# Exit
 		.set SYS_EXEC,0x1		# Exec
-#
-# V86 constants.
-#
+/*
+ * V86 constants.
+ */
 		.set V86_FLG,0x208eff		# V86 flag mask
 		.set V86_STK,0x400		# V86 stack allowance
-#
-# Dump format control bytes.
-#
+/*
+ * Dump format control bytes.
+ */
 		.set DMP_X16,0x1		# Word
 		.set DMP_X32,0x2		# Long
 		.set DMP_MEM,0x4		# Memory
 		.set DMP_EOL,0x8		# End of line
-#
-# Screen defaults and assumptions.
-#
+/*
+ * Screen defaults and assumptions.
+ */
 #ifdef PC98
 		.set SCR_MAT,0xe1		# Mode/attribute
 #else
@@ -78,9 +78,9 @@
 #endif
 		.set SCR_COL,0x50		# Columns per row
 		.set SCR_ROW,0x19		# Rows per screen
-#
-# BIOS Data Area locations.
-#
+/*
+ * BIOS Data Area locations.
+ */
 #ifdef PC98
 		.set BDA_MEM,0x501		# Free memory
 		.set BDA_KEYFLAGS,0x53a		# Keyboard shift-state flags
@@ -92,23 +92,23 @@
 		.set BDA_POS,0x450		# Cursor position
 		.set BDA_BOOT,0x472		# Boot howto flag
 #endif
-#
-# Derivations, for brevity.
-#
+/*
+ * Derivations, for brevity.
+ */
 		.set _ESP0H,MEM_ESP0>>0x8	# Byte 1 of ESP0
 		.set _ESP1H,MEM_ESP1>>0x8	# Byte 1 of ESP1
 		.set _TSSIO,MEM_MAP-MEM_TSS	# TSS I/O base
 		.set _TSSLM,MEM_DIR-MEM_TSS-1	# TSS limit
 		.set _IDTLM,MEM_TSS-MEM_IDT-1	# IDT limit
-#
-# Code segment.
-#
+/*
+ * Code segment.
+ */
 		.globl start
 		.code16
 start:						# Start of code
-#
-# BTX header.
-#
+/*
+ * BTX header.
+ */
 btx_hdr:	.byte 0xeb			# Machine ID
 		.byte 0xe			# Header size
 		.ascii "BTX"			# Magic
@@ -118,9 +118,9 @@ btx_hdr:	.byte 0xeb			# Machine ID
 		.word PAG_CNT-MEM_ORG>>0xc	# Paging control
 		.word break-start		# Text size
 		.long 0x0			# Entry address
-#
-# Initialization routine.
-#
+/*
+ * Initialization routine.
+ */
 init:		cli				# Disable interrupts
 		xor %ax,%ax			# Zero/segment
 		mov %ax,%ss			# Set up
@@ -129,18 +129,18 @@ init:		cli				# Disable interrupts
 		mov %ax,%ds			#  data
 		pushl $0x2			# Clear
 		popfl				#  flags
-#
-# Initialize memory.
-#
+/*
+ * Initialize memory.
+ */
 		mov $MEM_IDT,%di		# Memory to initialize
 		mov $(MEM_ORG-MEM_IDT)/2,%cx	# Words to zero
 		push %di			# Save
 		rep				# Zero-fill
 		stosw				#  memory
 		pop %di				# Restore
-#
-# Create IDT.
-#
+/*
+ * Create IDT.
+ */
 		mov $idtctl,%si			# Control string
 init.1: 	lodsb				# Get entry
 		cbw				#  count
@@ -161,17 +161,17 @@ init.2: 	shr %bx				# Handle this int?
 init.3: 	lea 0x8(%di),%di		# Next entry
 		loop init.2			# Till set done
 		jmp init.1			# Continue
-#
-# Initialize TSS.
-#
+/*
+ * Initialize TSS.
+ */
 init.4: 	movb $_ESP0H,TSS_ESP0+1(%di)	# Set ESP0
 		movb $SEL_SDATA,TSS_SS0(%di)	# Set SS0
 		movb $_ESP1H,TSS_ESP1+1(%di)	# Set ESP1
 		movb $_TSSIO,TSS_MAP(%di)	# Set I/O bit map base
 #ifdef PAGING
-#
-# Create page directory.
-#
+/*
+ * Create page directory.
+ */
 		xor %edx,%edx			# Page
 		mov $PAG_SIZ>>0x8,%dh		#  size
 		xor %eax,%eax			# Zero
@@ -181,9 +181,9 @@ init.4: 	movb $_ESP0H,TSS_ESP0+1(%di)	# Set ESP0
 init.5: 	stosl				# Write entry
 		add %dx,%ax			# To next
 		loop init.5			# Till done
-#
-# Create page tables.
-#
+/*
+ * Create page tables.
+ */
 		mov $MEM_TBL,%di		# Page table
 		mov $PAG_CNT>>0x8,%ch		# Entries
 		xor %ax,%ax			# Start address
@@ -202,9 +202,9 @@ init.7: 	stosl				# Set entry
 		add %edx,%eax			# Next address
 		loop init.6			# Till done
 #endif
-#
-# Bring up the system.
-#
+/*
+ * Bring up the system.
+ */
 		mov $0x2820,%bx			# Set protected mode
 		callw setpic			#  IRQ offsets
 		lidt idtdesc	 		# Set IDT
@@ -220,15 +220,15 @@ init.7: 	stosl				# Set entry
 #else
 		or $0x01,%eax			#  mode
 #endif
-		mov %eax,%cr0			#  
+		mov %eax,%cr0			#
 		ljmp $SEL_SCODE,$init.8		# To 32-bit code
 		.code32
 init.8: 	xorl %ecx,%ecx			# Zero
 		movb $SEL_SDATA,%cl		# To 32-bit
 		movw %cx,%ss			#  stack
-#
-# Launch user task.
-#
+/*
+ * Launch user task.
+ */
 		movb $SEL_TSS,%cl		# Set task
 		ltr %cx				#  register
 		movl $MEM_USR,%edx		# User base address
@@ -265,26 +265,26 @@ init.9:		push $0x0			#  general
 		popl %fs			#  segment
 		popl %gs			#  registers
 		iret				# To user mode
-#
-# Exit routine.
-#
+/*
+ * Exit routine.
+ */
 exit:		cli				# Disable interrupts
 		movl $MEM_ESP0,%esp		# Clear stack
-#
-# Turn off paging.
-#
+/*
+ * Turn off paging.
+ */
 		movl %cr0,%eax			# Get CR0
 		andl $~0x80000000,%eax		# Disable
 		movl %eax,%cr0			#  paging
 		xorl %ecx,%ecx			# Zero
 		movl %ecx,%cr3			# Flush TLB
-#
-# Restore the GDT in case we caught a kernel trap.
-#
+/*
+ * Restore the GDT in case we caught a kernel trap.
+ */
 		lgdt gdtdesc	 		# Set GDT
-#
-# To 16 bits.
-#
+/*
+ * To 16 bits.
+ */
 		ljmpw $SEL_RCODE,$exit.1	# Reload CS
 		.code16
 exit.1: 	mov $SEL_RDATA,%cl		# 16-bit selector
@@ -293,9 +293,9 @@ exit.1: 	mov $SEL_RDATA,%cl		# 16-bit selector
 		mov %cx,%es			#  remaining
 		mov %cx,%fs			#  segment
 		mov %cx,%gs			#  registers
-#
-# To real-address mode.
-#
+/*
+ * To real-address mode.
+ */
 		dec %ax				# Switch to
 		mov %eax,%cr0			#  real mode
 		ljmp $0x0,$exit.2		# Reload CS
@@ -309,9 +309,9 @@ exit.2: 	xor %ax,%ax			# Real mode segment
 #endif
 		callw setpic			#  IRQ offsets
 		lidt ivtdesc	 		# Set IVT
-#
-# Reboot or await reset.
-#
+/*
+ * Reboot or await reset.
+ */
 		sti				# Enable interrupts
 		testb $0x1,btx_hdr+0x7		# Reboot?
 exit.3:		jz exit.3			# No
@@ -325,9 +325,9 @@ exit.4:		jmp exit.4
 		movw $0x1234, BDA_BOOT		# Do a warm boot
 		ljmp $0xf000,$0xfff0		# reboot the machine
 #endif
-#
-# Set IRQ offsets by reprogramming 8259A PICs.
-#
+/*
+ * Set IRQ offsets by reprogramming 8259A PICs.
+ */
 #ifdef PC98
 setpic: 	in $0x02,%al			# Save master
 		push %ax			#  IMR
@@ -378,13 +378,13 @@ setpic: 	in $0x21,%al			# Save master
 #endif
 		retw				# To caller
 		.code32
-#
-# Initiate return from V86 mode to user mode.
-#
+/*
+ * Initiate return from V86 mode to user mode.
+ */
 inthlt: 	hlt				# To supervisor mode
-#
-# Exception jump table.
-#
+/*
+ * Exception jump table.
+ */
 intx00: 	push $0x0			# Int 0x0: #DE
 		jmp ex_noc			# Divide error
 		push $0x1			# Int 0x1: #DB
@@ -413,20 +413,20 @@ intx00: 	push $0x0			# Int 0x0: #DE
 		jmp except			# Page fault
 intx10: 	push $0x10			# Int 0x10: #MF
 		jmp ex_noc			# Floating-point error
-#
-# Handle #GP exception.
-#
+/*
+ * Handle #GP exception.
+ */
 ex_v86: 	testb $0x2,0x12(%esp,1) 	# V86 mode?
 		jz except			# No
 		jmp v86mon			# To monitor
-#
-# Save a zero error code.
-#
+/*
+ * Save a zero error code.
+ */
 ex_noc: 	pushl (%esp,1)			# Duplicate int no
 		movb $0x0,0x4(%esp,1)		# Fake error code
-#
-# Handle exception.
-#
+/*
+ * Handle exception.
+ */
 except: 	cld				# String ops inc
 		pushl %ds			# Save
 		pushl %es			#  most
@@ -500,9 +500,9 @@ wait.2:
 except.2a:	jmp exit			# Exit
 except.3:	leal 0x8(%esp,1),%esp		# Discard err, int no
 		iret				# From interrupt
-#
-# Return to user mode from V86 mode.
-#
+/*
+ * Return to user mode from V86 mode.
+ */
 intrtn: 	cld				# String ops inc
 		pushl %ds			# Address
 		popl %es			#  data
@@ -542,9 +542,9 @@ intrtn.2:	movl %edx,%esi			# Segment registers
 		popl %fs			#  segment
 		popl %gs			#  registers
 		iret				# To user mode
-#
-# V86 monitor.
-#
+/*
+ * V86 monitor.
+ */
 v86mon: 	cld				# String ops inc
 		pushl $SEL_SDATA		# Set up for
 		popl %ds			#  flat addressing
@@ -608,69 +608,69 @@ v86mon.7:	subl %edi,%esi			# From linear
 		popa				# Restore
 		leal 0x8(%esp,1),%esp		# Discard int no, error
 		iret				# To V86 mode
-#
-# Emulate MOV EAX,CR0.
-#
+/*
+ * Emulate MOV EAX,CR0.
+ */
 v86mov: 	movl %cr0,%eax			# CR0 to
 		movl %eax,0x1c(%ebp)		#  saved EAX
 		incl %esi			# Adjust IP
-#
-# Return from emulating a 0x0f prefixed instruction
-#
+/*
+ * Return from emulating a 0x0f prefixed instruction
+ */
 v86preret:	incl %esi			# Adjust IP
 		jmp v86mon.7			# Finish up
-#
-# Emulate WBINVD
-#
+/*
+ * Emulate WBINVD
+ */
 v86wbinvd:	wbinvd				# Write back and invalidate
 						#  cache
 		jmp v86preret			# Finish up
-#
-# Emulate WRMSR
-#
+/*
+ * Emulate WRMSR
+ */
 v86wrmsr:	movl 0x18(%ebp),%ecx		# Get user's %ecx (MSR to write)
 		movl 0x14(%ebp),%edx		# Load the value
 		movl 0x1c(%ebp),%eax		#  to write
 		wrmsr				# Write MSR
 		jmp v86preret			# Finish up
-#
-# Emulate RDMSR
-#
+/*
+ * Emulate RDMSR
+ */
 v86rdmsr:	movl 0x18(%ebp),%ecx		# MSR to read
 		rdmsr				# Read the MSR
 		movl %eax,0x1c(%ebp)		# Return the value of
 		movl %edx,0x14(%ebp)		#  the MSR to the user
 		jmp v86preret			# Finish up
-#
-# Emulate CLI.
-#
+/*
+ * Emulate CLI.
+ */
 v86cli: 	andb $~0x2,0x31(%ebp)		# Clear IF
 		jmp v86mon.7			# Finish up
-#
-# Emulate STI.
-#
+/*
+ * Emulate STI.
+ */
 v86sti: 	orb $0x2,0x31(%ebp)		# Set IF
 		jmp v86mon.7			# Finish up
-#
-# Emulate PUSHF/PUSHFD.
-#
+/*
+ * Emulate PUSHF/PUSHFD.
+ */
 v86pushf:	subl %ecx,%ebx			# Adjust SP
 		cmpb $0x4,%cl			# 32-bit
 		je v86pushf.1			# Yes
 		data16				# 16-bit
 v86pushf.1:	movl %edx,(%ebx)		# Save flags
 		jmp v86mon.6			# Finish up
-#
-# Emulate IRET/IRETD.
-#
+/*
+ * Emulate IRET/IRETD.
+ */
 v86iret:	movzwl (%ebx),%esi		# Load V86 IP
 		movzwl 0x2(%ebx),%edi		# Load V86 CS
 		leal 0x4(%ebx),%ebx		# Adjust SP
 		movl %edi,0x2c(%ebp)		# Save V86 CS
 		xorl %edi,%edi			# No ESI adjustment
-#
-# Emulate POPF/POPFD (and remainder of IRET/IRETD).
-#
+/*
+ * Emulate POPF/POPFD (and remainder of IRET/IRETD).
+ */
 v86popf:	cmpb $0x4,%cl			# 32-bit?
 		je v86popf.1			# Yes
 		movl %edx,%eax			# Initialize
@@ -681,19 +681,19 @@ v86popf.1:	movl (%ebx),%eax		# Load flags
 		andl $~V86_FLG,%edx		#  the
 		orl %eax,%edx			#  flags
 		jmp v86mon.5			# Finish up
-#
-# trap int 15, function 87
-# reads %es:%si from saved registers on stack to find a GDT containing
-# source and destination locations
-# reads count of words from saved %cx
-# returns success by setting %ah to 0
-#
-int15_87:	pushl %eax			# Save 
-		pushl %ebx			#  some information 
+/*
+ * trap int 15, function 87
+ * reads %es:%si from saved registers on stack to find a GDT containing
+ * source and destination locations
+ * reads count of words from saved %cx
+ * returns success by setting %ah to 0
+ */
+int15_87:	pushl %eax			# Save
+		pushl %ebx			#  some information
 		pushl %esi			#  onto the stack.
 		pushl %edi
-		xorl %eax,%eax			# clean EAX 
-		xorl %ebx,%ebx			# clean EBX 
+		xorl %eax,%eax			# clean EAX
+		xorl %ebx,%ebx			# clean EBX
 		movl 0x4(%ebp),%esi		# Get user's ESI
 		movl 0x3C(%ebp),%ebx		# store ES
 		movw %si,%ax			# store SI
@@ -728,15 +728,15 @@ int15_87:	pushl %eax			# Save
 		andb $0xfe,%dl			# clear CF
 		jmp v86mon.5			# Finish up
 
-#
-# Reboot the machine by setting the reboot flag and exiting
-#
+/*
+ * Reboot the machine by setting the reboot flag and exiting
+ */
 reboot:		orb $0x1,btx_hdr+0x7		# Set the reboot flag
 		jmp exit			# Terminate BTX and reboot
 
-#
-# Emulate INT imm8... also make sure to check if it's int 15/87
-#
+/*
+ * Emulate INT imm8... also make sure to check if it's int 15/87
+ */
 v86intn:	lodsb				# Get int no
 		cmpb $0x19,%al			# is it int 19?
 		je reboot			#  yes, reboot the machine
@@ -775,9 +775,9 @@ v86intn.3:	subl %edi,%esi			# From
 		xorl %edi,%edi			# No ESI adjustment
 		andb $~0x1,%dh			# Clear TF
 		jmp v86mon.5			# Finish up
-#
-# Hardware interrupt jump table.
-#
+/*
+ * Hardware interrupt jump table.
+ */
 intx20: 	push $0x8			# Int 0x20: IRQ0
 		jmp int_hw			# V86 int 0x8
 		push $0x9			# Int 0x21: IRQ1
@@ -829,9 +829,9 @@ intx20: 	push $0x8			# Int 0x20: IRQ0
 		push $0x77			# Int 0x2f: IRQ15
 		jmp int_hw			# V86 int 0x77
 #endif
-#
-# Reflect hardware interrupts.
-#
+/*
+ * Reflect hardware interrupts.
+ */
 int_hw: 	testb $0x2,0xe(%esp,1)		# V86 mode?
 		jz intusr			# No
 		pushl $SEL_SDATA		# Address
@@ -858,14 +858,14 @@ int_hw: 	testb $0x2,0xe(%esp,1)		# V86 mode?
 		popl %ebp			#  saved
 		popl %eax			#  registers
 		iret				# To V86 mode
-#
-# Invoke V86 interrupt from user mode, with arguments.
-#
+/*
+ * Invoke V86 interrupt from user mode, with arguments.
+ */
 intx31: 	stc				# Have btx_v86
 		pushl %eax			# Missing int no
-#
-# Invoke V86 interrupt from user mode.
-#
+/*
+ * Invoke V86 interrupt from user mode.
+ */
 intusr: 	std				# String ops dec
 		pushl %eax			# Expand
 		pushl %eax			#  stack
@@ -950,9 +950,9 @@ intusr.5:	movl %eax,%ecx			# Save
 		leal 0x10(%esp,1),%esp		# Discard seg regs
 		popa				# Restore
 		iret				# To V86 mode
-#
-# System Call.
-#
+/*
+ * System Call.
+ */
 intx30: 	cmpl $SYS_EXEC,%eax		# Exec system call?
 		jne intx30.1			# No
 		pushl %ss			# Set up
@@ -977,9 +977,9 @@ intx30: 	cmpl $SYS_EXEC,%eax		# Exec system call?
 		call *%eax			#  program
 intx30.1:	orb $0x1,%ss:btx_hdr+0x7	# Flag reboot
 		jmp exit			# Exit
-#
-# Dump structure [EBX] to [EDI], using format string [ESI].
-#
+/*
+ * Dump structure [EBX] to [EDI], using format string [ESI].
+ */
 dump.0: 	stosb				# Save char
 dump:		lodsb				# Load char
 		testb %al,%al			# End of string?
@@ -1048,9 +1048,9 @@ dump.8: 	popl %esi			# Restore
 dump.9: 	jmp dump.0			# Continue
 dump.10:	stosb				# Terminate string
 		ret				# To caller
-#
-# Convert EAX, AX, or AL to hex, saving the result to [EDI].
-#
+/*
+ * Convert EAX, AX, or AL to hex, saving the result to [EDI].
+ */
 hex32:		pushl %eax			# Save
 		shrl $0x10,%eax 		# Do upper
 		call hex16			#  16
@@ -1068,9 +1068,9 @@ hex8.1: 	andb $0xf,%al			# Get lower 4
 		orb $0x20,%al			# To lower case
 		stosb				# Save char
 		ret				# (Recursive)
-#
-# Output zero-terminated string [ESI] to the console.
-#
+/*
+ * Output zero-terminated string [ESI] to the console.
+ */
 putstr.0:	call putchr			# Output char
 putstr: 	lodsb				# Load char
 		testb %al,%al			# End of string?
@@ -1081,7 +1081,7 @@ putstr: 	lodsb				# Load char
 		.set SIO_FMT,SIOFMT		# 8N1
 		.set SIO_DIV,(115200/SIOSPD)	# 115200 / SPD
 
-# void sio_init(void)
+ * void sio_init(void)
 
 sio_init:	movw $SIO_PRT+0x3,%dx		# Data format reg
 		movb $SIO_FMT|0x80,%al		# Set format
@@ -1098,14 +1098,14 @@ sio_init:	movw $SIO_PRT+0x3,%dx		# Data format reg
 		outb %al,(%dx)			#  DTR
 		incl %edx			# Line status reg
 
-# void sio_flush(void)
+ * void sio_flush(void)
 
 sio_flush.0:	call sio_getc.1 		# Get character
 sio_flush:	call sio_ischar 		# Check for character
 		jnz sio_flush.0 		# Till none
 		ret				# To caller
 
-# void sio_putc(int c)
+ * void sio_putc(int c)
 
 sio_putc:	movw $SIO_PRT+0x5,%dx		# Line status reg
 		xor %ecx,%ecx			# Timeout
@@ -1119,7 +1119,7 @@ sio_putc.1:	inb (%dx),%al			# Transmitter
 		outb %al,(%dx)			# Write character
 sio_putc.2:	ret $0x4			# To caller
 
-# int sio_getc(void)
+ * int sio_getc(void)
 
 sio_getc:	call sio_ischar 		# Character available?
 		jz sio_getc			# No
@@ -1127,7 +1127,7 @@ sio_getc.1:	subb $0x5,%dl			# Receiver buffer reg
 		inb (%dx),%al			# Read character
 		ret				# To caller
 
-# int sio_ischar(void)
+ * int sio_ischar(void)
 
 sio_ischar:	movw $SIO_PRT+0x5,%dx		# Line status register
 		xorl %eax,%eax			# Zero
@@ -1135,9 +1135,9 @@ sio_ischar:	movw $SIO_PRT+0x5,%dx		# Line status register
 		andb $0x1,%al			#  ready?
 		ret				# To caller
 
-#
-# Output character AL to the serial console.
-#
+/*
+ * Output character AL to the serial console.
+ */
 putchr: 	pusha				# Save
 		cmpb $10, %al			# is it a newline?
 		jne putchr.1			#  no?, then leave
@@ -1150,9 +1150,9 @@ putchr.1:	pushl %eax			# Push the character
 		popa				# Restore
 		ret				# To caller
 #else
-#
-# Output character AL to the console.
-#
+/*
+ * Output character AL to the console.
+ */
 putchr: 	pusha				# Save
 		xorl %ecx,%ecx			# Zero for loops
 		movb $SCR_MAT,%ah		# Mode/attribute
@@ -1221,9 +1221,9 @@ putchr.4:	movw %dx,(%ebx) 		# Update position
 #endif
 
 		.p2align 4
-#
-# Global descriptor table.
-#
+/*
+ * Global descriptor table.
+ */
 gdt:		.word 0x0,0x0,0x0,0x0		# Null entry
 		.word 0xffff,0x0,0x9a00,0xcf	# SEL_SCODE
 		.word 0xffff,0x0,0x9200,0xcf	# SEL_SDATA
@@ -1233,15 +1233,15 @@ gdt:		.word 0x0,0x0,0x0,0x0		# Null entry
 		.word 0xffff,MEM_USR,0xf200,0xcf# SEL_UDATA
 		.word _TSSLM,MEM_TSS,0x8900,0x0 # SEL_TSS
 gdt.1:
-#
-# Pseudo-descriptors.
-#
+/*
+ * Pseudo-descriptors.
+ */
 gdtdesc:	.word gdt.1-gdt-1,gdt,0x0	# GDT
 idtdesc:	.word _IDTLM,MEM_IDT,0x0	# IDT
 ivtdesc:	.word 0x400-0x0-1,0x0,0x0	# IVT
-#
-# IDT construction control string.
-#
+/*
+ * IDT construction control string.
+ */
 idtctl: 	.byte 0x10,  0x8e		# Int 0x0-0xf
 		.word 0x7dfb,intx00		#  (exceptions)
 		.byte 0x10,  0x8e		# Int 0x10
@@ -1253,9 +1253,9 @@ idtctl: 	.byte 0x10,  0x8e		# Int 0x0-0xf
 		.byte 0x2,   0xee		# Int 0x31-0x32
 		.word 0x1,   intx31		#  (V86, null)
 		.byte 0x0			# End of string
-#
-# Dump format string.
-#
+/*
+ * Dump format string.
+ */
 dmpfmt: 	.byte '\n'			# "\n"
 		.ascii "int"			# "int="
 		.byte 0x80|DMP_X32,	   0x40 # "00000000  "
@@ -1299,8 +1299,8 @@ dmpfmt: 	.byte '\n'			# "\n"
 		.ascii "ss:esp" 		# "ss:esp="
 		.byte 0x80|DMP_MEM|DMP_EOL,0x0	# "00 00 ... 00 00\n"
 		.asciz "BTX halted\n"		# End
-#
-# End of BTX memory.
-#
+/*
+ * End of BTX memory.
+ */
 		.p2align 4
 break:
diff --git a/sys/boot/pc98/btx/btxldr/btxldr.S b/sys/boot/pc98/btx/btxldr/btxldr.S
index 7a3964d..9c414a6 100644
--- a/sys/boot/pc98/btx/btxldr/btxldr.S
+++ b/sys/boot/pc98/btx/btxldr/btxldr.S
@@ -1,48 +1,48 @@
-#
-# Copyright (c) 1998 Robert Nordier
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms are freely
-# permitted provided that the above copyright notice and this
-# paragraph and the following disclaimer are duplicated in all
-# such forms.
-#
-# This software is provided "AS IS" and without any express or
-# implied warranties, including, without limitation, the implied
-# warranties of merchantability and fitness for a particular
-# purpose.
-#
+/*
+ * Copyright (c) 1998 Robert Nordier
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms are freely
+ * permitted provided that the above copyright notice and this
+ * paragraph and the following disclaimer are duplicated in all
+ * such forms.
+ *
+ * This software is provided "AS IS" and without any express or
+ * implied warranties, including, without limitation, the implied
+ * warranties of merchantability and fitness for a particular
+ * purpose.
+ *
+ * $FreeBSD$
+ */
 
-# $FreeBSD$
+/*
+ * Prototype BTX loader program, written in a couple of hours.  The
+ * real thing should probably be more flexible, and in C.
+ */
 
-#
-# Prototype BTX loader program, written in a couple of hours.  The
-# real thing should probably be more flexible, and in C.
-#
-
-#
-# Memory locations.
-#
+/*
+ * Memory locations.
+ */
 		.set MEM_STUB,0x600		# Real mode stub
 		.set MEM_ESP,0x1000		# New stack pointer
 		.set MEM_TBL,0x5000		# BTX page tables
 		.set MEM_ENTRY,0x9010		# BTX entry point
 		.set MEM_DATA,start+0x1000	# Data segment
-#
-# Segment selectors.
-#
+/*
+ * Segment selectors.
+ */
 		.set SEL_SCODE,0x8		# 4GB code
 		.set SEL_SDATA,0x10		# 4GB data
 		.set SEL_RCODE,0x18		# 64K code
 		.set SEL_RDATA,0x20		# 64K data
-#
-# Paging constants.
-#
+/*
+ * Paging constants.
+ */
 		.set PAG_SIZ,0x1000		# Page size
 		.set PAG_ENT,0x4		# Page entry size
-#
-# Screen constants.
-#
+/*
+ * Screen constants.
+ */
 #ifdef PC98
 		.set SCR_MAT,0xe1		# Mode/attribute
 #else
@@ -50,9 +50,9 @@
 #endif
 		.set SCR_COL,0x50		# Columns per row
 		.set SCR_ROW,0x19		# Rows per screen
-#
-# BIOS Data Area locations.
-#
+/*
+ * BIOS Data Area locations.
+ */
 #ifdef PC98
 		.set BDA_MEM,0xa1501		# Free memory
 		.set BDA_POS,0xa153e		# Cursor position
@@ -61,17 +61,17 @@
 		.set BDA_SCR,0x449		# Video mode
 		.set BDA_POS,0x450		# Cursor position
 #endif
-#
-# Required by aout gas inadequacy.
-#
+/*
+ * Required by aout gas inadequacy.
+ */
 		.set SIZ_STUB,0x1a		# Size of stub
-#
-# We expect to be loaded by boot2 at the origin defined in ./Makefile.
-#
+/*
+ * We expect to be loaded by boot2 at the origin defined in ./Makefile.
+ */
 		.globl start
-#
-# BTX program loader for ELF clients.
-#
+/*
+ * BTX program loader for ELF clients.
+ */
 start:		cld				# String ops inc
 #ifdef PC98
 		cli
@@ -112,9 +112,9 @@ gdcwait.2:	inb $0x60,%al
 		call putstr			#  base memory
 #endif
 		lgdt gdtdesc			# Load new GDT
-#
-# Relocate caller's arguments.
-#
+/*
+ * Relocate caller's arguments.
+ */
 #ifdef BTXLDR_VERBOSE
 		movl $m_esp,%esi		# Display
 		movl %esp,%eax			#  caller
@@ -156,9 +156,9 @@ start_null_bi:	movl $0x18,%ecx 		# Allocate space
 		call hexout			#  relocation
 		call putstr			#  message
 #endif
-#
-# Set up BTX kernel.
-#
+/*
+ * Set up BTX kernel.
+ */
 		movl $MEM_ESP,%esp		# Set up new stack
 		movl $MEM_DATA,%ebx		# Data segment
 		movl $m_vers,%esi		# Display BTX
@@ -210,9 +210,9 @@ start_null_bi:	movl $0x18,%ecx 		# Allocate space
 		call hexout			#  base
 		call putstr			#  address
 #endif
-#
-# Set up ELF-format client program.
-#
+/*
+ * Set up ELF-format client program.
+ */
 		cmpl $0x464c457f,(%ebx) 	# ELF magic number?
 		je start.3			# Yes
 		movl $e_fmt,%esi		# Display error
@@ -289,9 +289,9 @@ start.8:	xorw %ax,%ax			# Data
 		ljmp $0,$MEM_ENTRY		# Jump to BTX entry point
 start.9:
 		.code32
-#
-# Output message [ESI] followed by EAX in hex.
-#
+/*
+ * Output message [ESI] followed by EAX in hex.
+ */
 hexout: 	pushl %eax			# Save
 		call putstr			# Display message
 		popl %eax			# Restore
@@ -314,17 +314,17 @@ hexout.2:	decl %esi			# Adjust for inc
 		popl %edi			# Restore
 		popl %esi			#  caller's
 		ret				# To caller
-#
-# Output zero-terminated string [ESI] to the console.
-#
+/*
+ * Output zero-terminated string [ESI] to the console.
+ */
 putstr.0:	call putchr			# Output char
 putstr: 	lodsb				# Load char
 		testb %al,%al			# End of string?
 		jne putstr.0			# No
 		ret				# To caller
-#
-# Output character AL to the console.
-#
+/*
+ * Output character AL to the console.
+ */
 putchr: 	pusha				# Save
 		xorl %ecx,%ecx			# Zero for loops
 		movb $SCR_MAT,%ah		# Mode/attribute
@@ -401,9 +401,9 @@ putchr.4:	movw %dx,(%ebx) 		# Update position
 #endif
 		popa				# Restore
 		ret				# To caller
-#
-# Convert EAX, AX, or AL to hex, saving the result to [EDI].
-#
+/*
+ * Convert EAX, AX, or AL to hex, saving the result to [EDI].
+ */
 hex32:		pushl %eax			# Save
 		shrl $0x10,%eax 		# Do upper
 		call hex16			#  16
@@ -424,9 +424,9 @@ hex8.1: 	andb $0xf,%al			# Get lower 4
 
 		.data
 		.p2align 4
-#
-# Global descriptor table.
-#
+/*
+ * Global descriptor table.
+ */
 gdt:		.word 0x0,0x0,0x0,0x0		# Null entry
 		.word 0xffff,0x0,0x9a00,0xcf	# SEL_SCODE
 		.word 0xffff,0x0,0x9200,0xcf	# SEL_SDATA
@@ -435,9 +435,9 @@ gdt:		.word 0x0,0x0,0x0,0x0		# Null entry
 gdt.1:
 gdtdesc:	.word gdt.1-gdt-1		# Limit
 		.long gdt			# Base
-#
-# Messages.
-#
+/*
+ * Messages.
+ */
 m_logo: 	.asciz " \nBTX loader 1.00  "
 m_vers: 	.asciz "BTX version is \0\n"
 e_fmt:		.asciz "Error: Client format not supported\n"
@@ -465,7 +465,7 @@ m_segs: 	.asciz "text segment: offset="
 		.asciz " memsz=\0\n"
 m_done: 	.asciz "Loading complete\n"
 #endif
-#
-# Uninitialized data area.
-#
+/*
+ * Uninitialized data area.
+ */
 buf:						# Scratch buffer