Driver 'aacraid' added. Supports Adaptec by PMC RAID controller families Series 6, 7, 8 and upcoming products. Older Adaptec RAID controller families are supported by the 'aac' driver.

Approved by:	scottl (mentor)

2 files changed, 140 insertions, 0 deletions

diff --git a/share/man/man4/Makefile b/share/man/man4/Makefile
index 8e18b01..98d88e6 100644
--- a/share/man/man4/Makefile
+++ b/share/man/man4/Makefile
@@ -4,6 +4,7 @@
 .include <bsd.own.mk>
 
 MAN=	aac.4 \
+	aacraid.4 \
 	acpi.4 \
 	${_acpi_asus.4} \
 	${_acpi_asus_wmi.4} \
diff --git a/share/man/man4/aacraid.4 b/share/man/man4/aacraid.4
new file mode 100644
index 0000000..3252e35
--- /dev/null
+++ b/share/man/man4/aacraid.4
@@ -0,0 +1,139 @@
+.\" Copyright (c) 2013 Achim Leubner
+.\" All rights reserved.
+.\"
+.\" Redistribution and use in source and binary forms, with or without
+.\" modification, are permitted provided that the following conditions
+.\" are met:
+.\" 1. Redistributions of source code must retain the above copyright
+.\"    notice, this list of conditions and the following disclaimer.
+.\" 2. Redistributions in binary form must reproduce the above copyright
+.\"    notice, this list of conditions and the following disclaimer in the
+.\"    documentation and/or other materials provided with the distribution.
+.\"
+.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
+.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+.\" ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
+.\" FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+.\" DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+.\" OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+.\" HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+.\" LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+.\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+.\" SUCH DAMAGE.
+.\"
+.\" $FreeBSD$
+.Dd April 09, 2013
+.Dt AACRAID 4
+.Os
+.Sh NAME
+.Nm aacraid
+.Nd Adaptec AACRAID Controller driver
+.Sh SYNOPSIS
+To compile this driver into the kernel,
+place the following lines in your
+kernel configuration file:
+.Bd -ragged -offset indent
+.Cd device pci
+.Cd device aacraid
+.Pp
+To compile in debugging code:
+.Cd options AACRAID_DEBUG=N
+.Ed
+.Pp
+Alternatively, to load the driver as a
+module at boot time, place the following line in
+.Xr loader.conf 5 :
+.Bd -literal -offset indent
+aacraid_load="YES"
+.Ed
+.Sh DESCRIPTION
+The
+.Nm
+driver provides support for the Adaptec by PMC RAID controllers,
+including Series 6/7/8 and upcoming families.
+.Pp
+The RAID containers are handled via the 
+.Nm aacraidp0
+bus.
+The physical buses are represented by the 
+.Nm aacraidp?
+devices (beginning with aacraidp1). These devices enable the
+SCSI pass-thru interface and allows devices connected
+to the card such as CD-ROMs to be available via the CAM
+.Xr scsi 4
+subsystem.
+Note that not all cards allow this interface to be enabled.
+.Pp
+The
+.Pa /dev/aacraid?
+device nodes provide access to the management interface of the controller.
+One node exists per installed card.
+If the kernel is compiled with the
+.Dv COMPAT_LINUX
+option, or the
+.Pa aacraid_linux.ko
+and
+.Pa linux.ko
+modules are loaded, the
+Linux-compatible
+.Xr ioctl 2
+interface for the management device will be enabled and will allow
+Linux-based management applications to control the card.
+.Sh HARDWARE
+Controllers supported by the
+.Nm
+driver include:
+.Pp
+.Bl -bullet -compact
+.It
+Adaptec ASR-6405(T|E)
+.It
+Adaptec ASR-6445
+.It
+Adaptec ASR-6805(T|E|Q|TQ)
+.It
+Adaptec ASR-7085
+.It
+Adaptec ASR-7805(Q)
+.It
+Adaptec ASR-70165
+.It
+Adaptec ASR-71605(E|Q)
+.It
+Adaptec ASR-71685
+.It
+Adaptec ASR-72405
+.It
+Adaptec Series 8 cards
+.El
+.Sh FILES
+.Bl -tag -width /boot/kernel/aacraid.ko -compact
+.It Pa /dev/aacraid?
+aacraid management interface
+.El
+.Sh DIAGNOSTICS
+Compiling with
+.Dv AACRAID_DEBUG
+set to a number between 0 and 3
+will enable increasingly verbose debug messages.
+.Pp
+The adapter can send status and alert messages asynchronously
+to the driver.
+These messages are printed on the system console,
+and are also queued for retrieval by a management application.
+.Sh SEE ALSO
+.Xr kld 4 ,
+.Xr linux 4 ,
+.Xr scsi 4 ,
+.Xr kldload 8
+.Sh AUTHORS
+.An Achim Leubner
+.Aq achim@FreeBSD.org
+.An Ed Maste
+.Aq emaste@FreeBSD.org
+.An Scott Long
+.Aq scottl@FreeBSD.org
+.Sh BUGS
+.Pp
+The controller is not actually paused on suspend/resume.