Pre 3.0 branch cleanup casualty #5: nca, sea, wds, uha

No CAM drivers available.  If somebody CAMifies one of these, they
will be welcome back in the tree

4 files changed, 4 insertions, 241 deletions

diff --git a/share/man/man4/man4.i386/Makefile b/share/man/man4/man4.i386/Makefile
index f976e26..e29a2a2 100644
--- a/share/man/man4/man4.i386/Makefile
+++ b/share/man/man4/man4.i386/Makefile
@@ -1,13 +1,13 @@
-#	$Id: Makefile,v 1.90 1998/12/27 12:44:49 phk Exp $
+#	$Id: Makefile,v 1.91 1998/12/27 12:52:39 phk Exp $
 
 MAN4=	adv.4 adw.4 aha.4 ahb.4 ahc.4 aic.4 alog.4 apm.4 ar.4 asc.4 bktr.4 \
 	bt.4 cs.4 cx.4 cy.4 de.4 \
 	dgb.4 dpt.4 ed.4 el.4 en.4 ep.4 ex.4 fdc.4 fe.4 fxp.4 gsc.4 ie.4 \
 	io.4 joy.4 keyboard.4 labpc.4 le.4 lnc.4 lp.4 lpt.4 matcd.4 mcd.4 \
-	mem.4 meteor.4 mouse.4 mse.4 mtio.4 mx.4 nca.4 ncr.4 npx.4 \
+	mem.4 meteor.4 mouse.4 mse.4 mtio.4 mx.4 ncr.4 npx.4 \
 	pcf.4 pcm.4 perfmon.4 pn.4 pnp.4 ppc.4 psm.4 \
-	rdp.4 rl.4 sb.4 scd.4 screen.4 sea.4 si.4 sio.4 \
-	spkr.4 sr.4 sysmouse.4 tl.4 tw.4 tx.4 uha.4 vr.4 vx.4 \
+	rdp.4 rl.4 sb.4 scd.4 screen.4 si.4 sio.4 \
+	spkr.4 sr.4 sysmouse.4 tl.4 tw.4 tx.4 vr.4 vx.4 \
 	wb.4 wd.4 wfd.4 wl.4 wt.4 xl.4 ze.4 zp.4
 
 MLINKS=		adv.4 ../adv.4
@@ -54,7 +54,6 @@ MLINKS+=	mouse.4 ../mouse.4
 MLINKS+=	mse.4 ../mse.4
 MLINKS+=	mtio.4 ../mtio.4
 MLINKS+=	mx.4 ../mx.4
-MLINKS+=	nca.4 ../nca.4
 MLINKS+=	ncr.4 ../ncr.4
 MLINKS+=	npx.4 ../npx.4
 MLINKS+=	pcf.4 ../pcf.4
@@ -69,7 +68,6 @@ MLINKS+=	rl.4 ../rl.4
 MLINKS+=	sb.4 ../sb.4
 MLINKS+=	scd.4 ../scd.4
 MLINKS+=	screen.4 ../screen.4
-MLINKS+=	sea.4 ../sea.4
 MLINKS+=	si.4 ../si.4
 MLINKS+=	sio.4 ../sio.4
 MLINKS+=	spkr.4 ../spkr.4 spkr.4 speaker.4 spkr.4 ../speaker.4
@@ -78,7 +76,6 @@ MLINKS+=	sysmouse.4 ../sysmouse.4
 MLINKS+=	tl.4 ../tl.4
 MLINKS+=	tw.4 ../tw.4
 MLINKS+=	tx.4 ../tx.4
-MLINKS+=	uha.4 ../uha.4
 MLINKS+=	vr.4 ../vr.4
 MLINKS+=	vx.4 ../vx.4
 MLINKS+=	wb.4 ../wb.4
diff --git a/share/man/man4/man4.i386/nca.4 b/share/man/man4/man4.i386/nca.4
deleted file mode 100644
index 1dc00b9..0000000
--- a/share/man/man4/man4.i386/nca.4
+++ /dev/null
@@ -1,71 +0,0 @@
-.\"Manual pages for FreeBSD generic NCR-5380/NCR-53C400 SCSI driver.
-.\"
-.\"Copyright 1994, Serge Vakulenko (vak@cronyx.ru)
-.\"
-.\"Redistribution and use of this document, with or without
-.\"modification, are permitted provided redistributions must retain
-.\"the above copyright notice and this condition.
-.\"
-.\"	$Id: nca.4,v 1.5 1997/02/22 13:25:35 peter Exp $
-.Dd January 9, 1995
-.Dt NCA 4 i386
-.Os FreeBSD
-.Sh NAME
-.Nm nca
-.Nd
-Generic NCR-5380/NCR-53C400 SCSI adapter driver
-.Sh SYNOPSIS
-Trantor 130, with IRQ:
-.Cd "controller nca0 at isa? port 0x350 bio irq 5"
-.Pp
-Trantor 130, without IRQ:
-.Cd "controller nca0 at isa? port 0x350
-.Pp
-ProAudioSpectrum-16, with IRQ:
-.Cd "controller nca0 at isa? port 0x1f88 bio irq 5"
-.Cd "controller nca1 at isa? port 0x1f84 bio irq 5"
-.Cd "controller nca2 at isa? port 0x1f8c bio irq 5"
-.Cd "controller nca3 at isa? port 0x1e88 bio irq 5"
-.Pp
-ProAudioSpectrum-16, without IRQ:
-.Cd "controller nca0 at isa? port 0x1f88
-.Cd "controller nca1 at isa? port 0x1f84
-.Cd "controller nca2 at isa? port 0x1f8c
-.Cd "controller nca3 at isa? port 0x1e88
-.Sh DESCRIPTION
-This driver provides access to SCSI devices connected to
-NCR-5380/NCR-53C400 SCSI adapter.
-.Pp
-It's possible to use the adapter without IRQ line.
-The data rate then slightly decreases (by 20-30%).
-.Pp
-The \fBflags\fP keyword in the configuration file can be used to set
-some adapter driver parameters:
-.Pp
-Bits    Description
-.br
-------------------------------------------
-.br
-0x01    Disable SCSI bus parity check.
-.Pp
-Tested on the following hardware:
-.br
-  Adapter: Trantor T130
-  Adapter: ProAudioSpectrum16
-.br
- Streamer: Archive Viper 150
-.br
-   CD-ROM: NEC CDR-25
-   CD-ROM: PLEXTOR CD-ROM PX-4XCH
-.Sh FILES
-.Bl -tag -width Pa -compact
-.It Pa /sys/i386/isa/ncr5380.c
-.It Pa /sys/i386/isa/ic/ncr5380.h
-.It Pa /sys/i386/isa/ic/ncr53400.h
-driver source
-.El
-.Sh SEE ALSO
-.Xr cd 4 ,
-.Xr scsi 4 ,
-.Xr sd 4 ,
-.Xr st 4
diff --git a/share/man/man4/man4.i386/sea.4 b/share/man/man4/man4.i386/sea.4
deleted file mode 100644
index 060cbd9..0000000
--- a/share/man/man4/man4.i386/sea.4
+++ /dev/null
@@ -1,90 +0,0 @@
-.\"Manual pages for FreeBSD Seagate ST01/02, Future Domain TMC-885,
-.\"TMC-950 SCSI driver.
-.\"
-.\"Copyright 1994, Serge Vakulenko (vak@cronyx.ru)
-.\"
-.\"Redistribution and use of this document, with or without
-.\"modification, are permitted provided redistributions must retain
-.\"the above copyright notice and this condition.
-.\"
-.\"	$Id: sea.4,v 1.7 1998/06/08 06:11:59 jkoshy Exp $
-.Dd December 25, 1994
-.Dt SEA 4 i386
-.Os FreeBSD
-.Sh NAME
-.Nm sea
-.Nd
-Seagate ST01/ST02, Future Domain TMC-885, TMC-950 SCSI adapter driver
-.Sh SYNOPSIS
-With explicit memory and IRQ parameters:
-.Cd "controller sea0 at isa? bio irq 5 iomem 0xc8000"
-.Pp
-With automatic memory address detection and no IRQ:
-.Cd "controller sea0 at isa?
-.Pp
-.Cd "controller scbus0
-.Pp
-For each connected disk:
-.Cd "device sd0
-.Pp
-For each connected tape device:
-.Cd "device st0
-.Pp
-For one or more cdroms:
-.Cd "device cd0
-.Sh DESCRIPTION
-This driver provides access to SCSI devices connected to Seagate ST01/ST02 or
-Future Domain TMC-885, TMC-950 SCSI adapter.
-.Pp
-It's possible to use the Seagate ST01/ST02 adapter without IRQ line.
-The data rate then slightly decreases (by 20-30%).
-.Pp
-The \fBflags\fP keyword in the configuration file can be used to set
-some adapter driver parameters:
-.Pp
-Bits    Description
-.br
-------------------------------------------
-.br
-0x01    Disable SCSI bus parity check.
-.Pp
-The original Seagate ST02
-BIOS cannot coexist with IDE or any other disk controller
-because it does not share BIOS disk drive numbers (80h, 81h)
-with others.  The probing code  of the driver allows using ST02 controller
-without BIOS: just unplug the ST02 BIOS chip from the board.
-.Pp
-Another problem is the floppy adapter on ST02 which could not be
-disabled by jumpers.  The ST02 adapter it the best as a cheap solution
-for attaching the tape and CD-ROM drives, and an extra floppy controller
-is just a headache.  There exist a simple workaround: cutting off
-the AEN signal (A11 contact on ISA connector).  AEN then goes high and
-disables the floppy adapter port address decoder.
-.Pp
-Some motherboards also have a problem with ST02 conflicting with IDE during
-IDE data write phase.  It seems than ST02 makes some noise
-on /IOW line.  The /IOW line is used only for floppy controller
-part of ST02, and because it's rarely needed, cutting off the /IOW
-(contact B13) will help.
-.Pp
-Tested on the following hardware:
-.br
-  Adapter: Seagate ST02
-.br
-     Disk: HP D1686
-.br
-Streamers: Archive Viper 150, Wangtek 5525
-.br
-  CD-ROMs: Toshiba XM-3401, NEC CDR-25
-.Pp
-Maximum data rate is about 270-280 kbytes/sec (on 386DX/40).
-.Sh FILES
-.Bl -tag -width Pa -compact
-.It Pa /sys/i386/isa/seagate.c
-driver source
-.El
-.Sh SEE ALSO
-.Xr cd 4 ,
-.Xr scsi 4 ,
-.Xr sd 4 ,
-.Xr st 4
diff --git a/share/man/man4/man4.i386/uha.4 b/share/man/man4/man4.i386/uha.4
deleted file mode 100644
index 4714c42..0000000
--- a/share/man/man4/man4.i386/uha.4
+++ /dev/null
@@ -1,73 +0,0 @@
-.\"
-.\" Copyright (c) 1994 Wilko Bulte
-.\" All rights reserved.
-.\"
-.\" Redistribution and use in source and binary forms, with or without
-.\" modification, are permitted provided that the following conditions
-.\" are met:
-.\" 1. Redistributions of source code must retain the above copyright
-.\"    notice, this list of conditions and the following disclaimer.
-.\" 2. Redistributions in binary form must reproduce the above copyright
-.\"    notice, this list of conditions and the following disclaimer in the
-.\"    documentation and/or other materials provided with the distribution.
-.\" 3. The name of the author may not be used to endorse or promote products
-.\"    derived from this software withough specific prior written permission
-.\"
-.\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
-.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
-.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
-.\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
-.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-.\"
-.\"	$Id: uha.4,v 1.9 1998/04/29 17:09:40 andreas Exp $
-.Dd August 31, 1994
-.Dt UHA 4 i386
-.Os FreeBSD
-.Sh NAME
-.Nm uha
-.Nd
-UltraStor SCSI host adapter driver
-.Sh SYNOPSIS
-For ULTRA 24F controllers in EISA mode:
-.Cd "controller uha0 at isa? bio irq ?"
-.Cd "controller scbus0
-.Pp
-For ULTRA 14F and 34F controllers:
-.Cd "controller uha0 at isa? port" \&"IO_UHA0\&" bio irq ? drq 5
-.Cd "controller scbus0
-.Pp
-For each disk:
-.Cd "device sd0
-.Pp
-For each tape device:
-.Cd "device st0
-.Pp
-For one or more cdroms:
-.Cd "device cd0
-.Sh DESCRIPTION
-This driver provides access to SCSI devices connected to an UltraStor
-ULTRA 14F, ULTRA 24F or ULTRA 34F host adapter.
-.Pp
-Note that for an ULTRA 24F in EISA mode no I/O addresses or DMA channels 
-are required in the kernel config file. If they are present, the driver
-will correctly find the ULTRA 24F, but you tie up precious DMA channels
-and I/O ranges which are not used by the card.
-The ULTRA 24F uses EISA slot specific I/O which is configured 
-automatically.
-.Sh FILES
-.Bl -tag -width Pa -compact
-.It Pa /sys/i386/conf/GENERIC
-sample generic kernel config file for Bustek and UltraStor based systems
-.It Pa /sys/i386/isa/ultra14f.c
-driver source
-.El
-.Sh SEE ALSO
-.Xr cd 4 ,
-.Xr scsi 4 ,
-.Xr sd 4 ,
-.Xr st 4