diff options
author | ache <ache@FreeBSD.org> | 1997-09-20 01:10:28 +0000 |
---|---|---|
committer | ache <ache@FreeBSD.org> | 1997-09-20 01:10:28 +0000 |
commit | e62fb2bfcb26305b5ab42729fcea05723ca1c92f (patch) | |
tree | 20fc626f0bb129621b2911a4c2bd01ed90277a2c /share/termcap/terminfo_extensions.doc | |
parent | c772a08c0b4d1df56ca549e06d7bbeff53b02913 (diff) | |
download | FreeBSD-src-e62fb2bfcb26305b5ab42729fcea05723ca1c92f.zip FreeBSD-src-e62fb2bfcb26305b5ab42729fcea05723ca1c92f.tar.gz |
Describe all know capabilities now
Diffstat (limited to 'share/termcap/terminfo_extensions.doc')
-rw-r--r-- | share/termcap/terminfo_extensions.doc | 476 |
1 files changed, 0 insertions, 476 deletions
diff --git a/share/termcap/terminfo_extensions.doc b/share/termcap/terminfo_extensions.doc deleted file mode 100644 index 8d3bdc9..0000000 --- a/share/termcap/terminfo_extensions.doc +++ /dev/null @@ -1,476 +0,0 @@ -# These are the boolean capabilities -auto_left_margin "bw" bool "bw" cub1 wraps from column 0 to last column -auto_right_margin "am" bool "am" terminal has automatic margins -no_esc_ctlc "xsb" bool "xb" beehive (f1=escape, f2=ctrl C) -ceol_standout_glitch "xhp" bool "xs" standout not erased by overwriting (hp) -eat_newline_glitch "xenl" bool "xn" newline ignored after 80 cols (concept) -erase_overstrike "eo" bool "eo" can erase overstrikes with a blank -generic_type "gn" bool "gn" generic line type -hard_copy "hc" bool "hc" hardcopy terminal -has_meta_key "km" bool "km" Has a meta key, sets msb high -has_status_line "hs" bool "hs" has extra status line -insert_null_glitch "in" bool "in" insert mode distinguishes nulls -memory_above "da" bool "da" display may be retained above the screen -memory_below "db" bool "db" display may be retained below the screen -move_insert_mode "mir" bool "mi" safe to move while in insert mode -move_standout_mode "msgr" bool "ms" safe to move while in standout mode -over_strike "os" bool "os" terminal can overstrike -status_line_esc_ok "eslok" bool "es" escape can be used on the status line -dest_tabs_magic_smso "xt" bool "xt" tabs destructive, magic so char (t1061) -tilde_glitch "hz" bool "hz" can't print ~'s (hazeltine) -transparent_underline "ul" bool "ul" underline character overstrikes -xon_xoff "xon" bool "xo" terminal uses xon/xoff handshaking -needs_xon_xoff "nxon" bool "nx" padding won't work, xon/xoff required -prtr_silent "mc5i" bool "5i" printer won't echo on screen -hard_cursor "chts" bool "HC" cursor is hard to see -non_rev_rmcup "nrrmc" bool "NR" smcup does not revrse rmcup -no_pad_char "npc" bool "NP" pad character does not exist -non_dest_scroll_region "ndscr" bool "ND" scrolling region is non-destructive -can_change "ccc" bool "cc" terminal can re-define exiting colors -back_color_erase "bce" bool "ut" screen erased with background color -hue_lightness_saturation "hls" bool "hl" terminal uses only HLS color notation (tektronix) -col_addr_glitch "xhpa" bool "YA" only positive motion for hpa/mhpa caps -cr_cancels_micro_mode "crxm" bool "YB" using cr turns off micro mode -has_print_wheel "daisy" bool "YC" printer needs operator to change character set -row_addr_glitch "xvpa" bool "YD" only posistive motion for vhp/mvpa caps -semi_auto_right_margin "sam" bool "YE" printing in last column causes cr -cpi_changes_res "cpix" bool "YF" changing character pitch changes resolution -lpi_changes_res "lpix" bool "YG" chnaging line pitch changes resolution -# These are the numerical capabilities -columns "cols" num "co" number of columns in a line -init_tabs "it" num "it" tabs initially every # spaces -lines "lines" num "li" number of lines on screen or page -lines_of_memory "lm" num "lm" lines of memory if > line. 0 => varies -magic_cookie_glitch "xmc" num "sg" number of blank chars left by smso or rmso -padding_baud_rate "pb" num "pb" lowest baud rate where padding needed -virtual_terminal "vt" num "vt" virtual terminal number (CB/unix) -width_status_line "wsl" num "ws" columns in status line -num_labels "nlab" num "Nl" number of lables on screen -label_height "lh" num "lh" rows in each label -label_width "lw" num "lw" columns in each label -max_attributes "ma" num "ma" maximum combined attributes terminal can handle -maximum_windows "wnum" num "MW" maxumum number of defineable windows -# These are newer capabilities, order is probably wrong -max_colors "colors" num "Co" maximum numbers of colors on screen -max_pairs "pairs" num "pa" maximum number of color-pairs on the screen -no_color_video "ncv" num "NC" video attributes that can't be used with colors -buffer_capacity "bufsz" num "Ya" numbers of bytes buffered before printing -dot_horz_spacing "spinh" num "Yc" spacing of pins vertically in pins per inch -dot_vert_spacing "spinv" num "Yb" spacing of dots horizontally in dots per inch -max_micro_address "maddr" num "Yd" maximum value in micro_..._address -max_micro_jump "mjump" num "Ye" maximum value in parm_..._micro -micro_char_size "mcs" num "Yf" character size when in micro mode -micro_line_size "mls" num "Yg" line size when in micro mode -number_of_pins "npins" num "Yh" numbers of pins in print-head -output_res_char "orc" num "Yi" horizontal resolution in units per line -output_res_line "orl" num "Yj" vertical resolution in units per line -output_res_horz_inch "orhi" num "Yk" horizontal resolution in units per inch -output_res_vert_inch "orvi" num "Yl" vertical resolution in units per inch -print_rate "cps" num "Ym" print rate in chars per second -wide_char_size "widcs" num "Yn" character step size when in double wide mode -buttons "btns" num "BT" number of buttons on mouse -bit_image_entwining "bitwin" num "Yo" number of passed for each bit-image row -bit_image_type "bitype" num "Yp" type of bit-image device -# These are the string capabilities -back_tab "cbt" str "bt" back tab -bell "bel" str "bl" audible signal (bell) -carriage_return "cr" str "cr" carriage return -change_scroll_region "csr" str "cs" change region to line #1 to line #2 -clear_all_tabs "tbc" str "ct" clear all tab stops -clear_screen "clear" str "cl" clear screen and home cursor -clr_eol "el" str "ce" clear to end of line -clr_eos "ed" str "cd" clear to edn of screen -column_address "hpa" str "ch" horizontal position, absolute -command_character "cmdch" str "CC" terminal settable cmd character in prototype !? -cursor_address "cup" str "cm" move to row #1 columns #2 -cursor_down "cud1" str "do" down one line -cursor_home "home" str "ho" home cursor (if no cup) -cursor_invisible "civis" str "vi" make cursor invisible -cursor_left "cub1" str "le" move left one space -cursor_mem_address "mrcup" str "CM" memory relative cursor addressing -cursor_normal "cnorm" str "ve" make cursor appear normal (undo civis/cvvis) -cursor_right "cuf1" str "nd" move right one space -cursor_to_ll "ll" str "ll" last line, first column (if no cup) -cursor_up "cuu1" str "up" up one line -cursor_visible "cvvis" str "vs" make cursor very visible -delete_character "dch1" str "dc" delete character -delete_line "dl1" str "dl" delete line -dis_status_line "dsl" str "ds" disable status line -down_half_line "hd" str "hd" half a line down -enter_alt_charset_mode "smacs" str "as" start alternate character set -enter_blink_mode "blink" str "mb" turn on blinking -enter_bold_mode "bold" str "md" turn on bold (extra bright) mode -enter_ca_mode "smcup" str "ti" string to start programs using cup -enter_delete_mode "smdc" str "dm" enter delete mode -enter_dim_mode "dim" str "mh" turn on half-bright mode -enter_insert_mode "smir" str "im" enter insert mode -enter_secure_mode "invis" str "mk" turn on blank mode (characters invisible) -enter_protected_mode "prot" str "mp" turn on protected mode -enter_reverse_mode "rev" str "mr" turn on reverse video mode -enter_standout_mode "smso" str "so" begin standout mode -enter_underline_mode "smul" str "us" begin underline mode -erase_chars "ech" str "ec" erase #1 characters -exit_alt_charset_mode "rmacs" str "ae" end alternate character set -exit_attribute_mode "sgr0" str "me" turn off all attributes -exit_ca_mode "rmcup" str "te" strings to end programs using cup -exit_delete_mode "rmdc" str "ed" end delete mode -exit_insert_mode "rmir" str "ei" exit insert mode -exit_standout_mode "rmso" str "se" exit standout mode -exit_underline_mode "rmul" str "ue" exit underline mode -flash_screen "flash" str "vb" visible bell (may not move cursor) -form_feed "ff" str "ff" hardcopy terminal page eject -from_status_line "fsl" str "fs" return from status line -init_1string "is1" str "i1" initialization string -init_2string "is2" str "is" initialization string -init_3string "is3" str "i3" initialization string -init_file "if" str "if" name of initialization file -insert_character "ich1" str "ic" insert character -insert_line "il1" str "al" insert line -insert_padding "ip" str "ip" insert padding after inserted character -key_backspace "kbs" str "kb" backspace key -key_catab "ktbc" str "ka" clear-all-tabs key -key_clear "kclr" str "kC" clear-screen or erase key -key_ctab "kctab" str "kt" clear-tab key -key_dc "kdch1" str "kD" delete-character key -key_dl "kdl1" str "kL" delete-line key -key_down "kcud1" str "kd" down-arrow key -key_eic "krmir" str "kM" sent by rmir or smir in insert mode -key_eol "kel" str "kE" clear-to-end-of-line key -key_eos "ked" str "kS" clear-to-end-of-screen key -key_f0 "kf0" str "k0" F0 function key -key_f1 "kf1" str "k1" F1 function key -key_f10 "kf10" str "k;" F10 function key -key_f2 "kf2" str "k2" F2 function key -key_f3 "kf3" str "k3" F3 function key -key_f4 "kf4" str "k4" F4 function key -key_f5 "kf5" str "k5" F5 function key -key_f6 "kf6" str "k6" F6 function key -key_f7 "kf7" str "k7" F7 function key -key_f8 "kf8" str "k8" F8 fucntion key -key_f9 "kf9" str "k9" F9 function key -key_home "khome" str "kh" home key -key_ic "kich1" str "kI" insert-character key -key_il "kil1" str "kA" insert-line key -key_left "kcub1" str "kl" left-arrow key -key_ll "kll" str "kH" last-line key -key_npage "knp" str "kN" next-page key -key_ppage "kpp" str "kP" prev-page key -key_right "kcuf1" str "kr" right-arrow key -key_sf "kind" str "kF" scroll-forward key -key_sr "kri" str "kR" scroll-backward key -key_stab "khts" str "kT" set-tab key -key_up "kcuu1" str "ku" up-arrow key -keypad_local "rmkx" str "ke" out of 'keyboard_transmit' mode -keypad_xmit "smkx" str "ks" enter into 'keyboard_transmit' mode -lab_f0 "lf0" str "l0" label on function key f0 if not f0 -lab_f1 "lf1" str "l1" label on function key f1 if not f1 -lab_f10 "lf10" str "la" label on function key f10 if not f10 -lab_f2 "lf2" str "l2" label on function key f2 if not f2 -lab_f3 "lf3" str "l3" label on function key f3 if not f3 -lab_f4 "lf4" str "l4" label on function key f4 if not f4 -lab_f5 "lf5" str "l5" lable on function key f5 if not f5 -lab_f6 "lf6" str "l6" label on function key f6 if not f6 -lab_f7 "lf7" str "l7" label on function key f7 if not f7 -lab_f8 "lf8" str "l8" label on function key f8 if not f8 -lab_f9 "lf9" str "l9" label on function key f9 if not f9 -meta_off "rmm" str "mo" turn off meta mode -meta_on "smm" str "mm" turn on meta mode (8th-bit on) -newline "nel" str "nw" newline (behave like cr followed be lf) -pad_char "pad" str "pc" padding char (instead of null) -parm_dch "dch" str "DC" delete #1 chars -parm_delete_line "dl" str "DL" delete #1 lines -parm_down_cursor "cud" str "DO" down #1 lines -parm_ich "ich" str "IC" insert #1 chars -parm_index "indn" str "SF" scroll forward #1 lines -parm_insert_line "il" str "AL" insert #1 lines -parm_left_cursor "cub" str "LE" move #1 chars to the left -parm_right_cursor "cuf" str "RI" move #1 chars to the right -parm_rindex "rin" str "SR" scroll back #1 lines -parm_up_cursor "cuu" str "UP" up #1 lines -pkey_key "pfkey" str "pk" program function key #1 to type string #2 -pkey_local "pfloc" str "pl" program function key #1 to execute string #2 -pkey_xmit "pfx" str "px" program function key #1 to transmit string #2 -print_screen "mc0" str "ps" print contents of screen -prtr_off "mc4" str "pf" turn off printer -prtr_on "mc5" str "po" turn on printer -repeat_char "rep" str "rp" repeat char #1 #2 times -reset_1string "rs1" str "r1" reset string -reset_2string "rs2" str "r2" reset string -reset_3string "rs3" str "r3" reset string -reset_file "rf" str "rf" name of reset file -restore_cursor "rc" str "rc" restore cursor to last position of sc -row_address "vpa" str "cv" vertical position absolute -save_cursor "sc" str "sc" save current cursor position -scroll_forward "ind" str "sf" scroll text up -scroll_reverse "ri" str "sr" scroll text down -set_attributes "sgr" str "sa" define video attributes #1-#9 -set_tab "hts" str "st" set a tab in every row, current columns -set_window "wind" str "wi" current window is lines #1-#2 cols #3-#4 -tab "ht" str "ta" tab to next 8-space hardware tab stop -to_status_line "tsl" str "ts" move to status line -underline_char "uc" str "uc" underline char and move past it -up_half_line "hu" str "hu" half a line up -init_prog "iprog" str "iP" path name of program for initialization -key_a1 "ka1" str "K1" upper left of keypad -key_a3 "ka3" str "K3" upper right of keypad -key_b2 "kb2" str "K2" center of keypad -key_c1 "kc1" str "K4" lower left of keypad -key_c3 "kc3" str "K5" lower right of keypad -prtr_non "mc5p" str "pO" turn on printer for #1 bytes -char_padding "rmp" str "rP" like ip but when in insert mode -acs_chars "acsc" str "ac" graphics charset pairs - def=vt100 -plab_norm "pln" str "pn" program label #1 to show string #2 -key_btab "kcbt" str "kB" back-tab key -enter_xon_mode "smxon" str "SX" turn on xon/xoff handshaking -exit_xon_mode "rmxon" str "RX" turn off xon/xoff handshaking -enter_am_mode "smam" str "SA" turn on automatic margins -exit_am_mode "rmam" str "RA" turn off automatic margins -xoff_character "xoffc" str "XF" XON character -xon_character "xonc" str "XN" XOFF character -ena_acs "enacs" str "eA" enable alternate char set -label_on "smln" str "LO" turn on soft labels -label_off "rmln" str "LF" turn off soft labels -key_beg "kbeg" str "@1" begin key -key_cancel "kcan" str "@2" cancel key -key_close "kclo" str "@3" close key -key_command "kcmd" str "@4" command key -key_copy "kcpy" str "@5" copy key -key_create "kcrt" str "@6" create key -key_end "kend" str "@7" end key -key_enter "kent" str "@8" enter/send key -key_exit "kext" str "@9" exit key -key_find "kfnd" str "@0" find key -key_help "khlp" str "%1" help key -key_mark "kmrk" str "%2" mark key -key_message "kmsg" str "%3" message key -key_move "kmov" str "%4" move key -key_next "knxt" str "%5" next key -key_open "kopn" str "%6" open key -key_options "kopt" str "%7" options key -key_previous "kprv" str "%8" previous key -key_print "kprt" str "%9" print key -key_redo "krdo" str "%0" redo key -key_reference "kref" str "&1" reference key -key_refresh "krfr" str "&2" refresh key -key_replace "krpl" str "&3" replace key -key_restart "krst" str "&4" restart key -key_resume "kres" str "&5" resume key -key_save "ksav" str "&6" save key -key_suspend "kspd" str "&7" suspend key -key_undo "kund" str "&8" undo key -key_sbeg "kBEG" str "&9" shifted key -key_scancel "kCAN" str "&0" shifted key -key_scommand "kCMD" str "*1" shifted key -key_scopy "kCPY" str "*2" shifted key -key_screate "kCRT" str "*3" shifted key -key_sdc "kDC" str "*4" shifted key -key_sdl "kDL" str "*5" shifted key -key_select "kslt" str "*6" -key_send "kEND" str "*7" shifted key -key_seol "kEOL" str "*8" shifted key -key_sexit "kEXT" str "*9" shifted key -key_sfind "kFND" str "*0" shifted key -key_shelp "kHLP" str "#1" shifted key -key_shome "kHOM" str "#2" shifted key -key_sic "kIC" str "#3" shifted key -key_sleft "kLFT" str "#4" shifted key -key_smessage "kMSG" str "%a" shifted key -key_smove "kMOV" str "%b" shifted key -key_snext "kNXT" str "%c" shifted key -key_soptions "kOPT" str "%d" shifted key -key_sprevious "kPRV" str "%e" shifted key -key_sprint "kPRT" str "%f" shifted key -key_sredo "kRDO" str "%g" shifted key -key_sreplace "kRPL" str "%h" shifted key -key_sright "kRIT" str "%i" shifted key -key_srsume "kRES" str "%j" shifted key -key_ssave "kSAV" str "!1" shifted key -key_ssuspend "kSPD" str "!2" shifted key -key_sundo "kUND" str "!3" shifted key -req_for_input "rfi" str "RF" -key_f11 "kf11" str "F1" F11 function key -key_f12 "kf12" str "F2" F12 function key -key_f13 "kf13" str "F3" F13 function key -key_f14 "kf14" str "F4" F14 function key -key_f15 "kf15" str "F5" F15 function key -key_f16 "kf16" str "F6" F16 function key -key_f17 "kf17" str "F7" F17 function key -key_f18 "kf18" str "F8" F18 function key -key_f19 "kf19" str "F9" F19 function key -key_f20 "kf20" str "FA" F20 function key -key_f21 "kf21" str "FB" F21 function key -key_f22 "kf22" str "FC" F22 function key -key_f23 "kf23" str "FD" F23 function key -key_f24 "kf24" str "FE" F24 function key -key_f25 "kf25" str "FF" F25 function key -key_f26 "kf26" str "FG" F26 function key -key_f27 "kf27" str "FH" F27 function key -key_f28 "kf28" str "FI" F28 function key -key_f29 "kf29" str "FJ" F29 function key -key_f30 "kf30" str "FK" F30 function key -key_f31 "kf31" str "FL" F31 function key -key_f32 "kf32" str "FM" F32 function key -key_f33 "kf33" str "FN" F33 function key -key_f34 "kf34" str "FO" F34 function key -key_f35 "kf35" str "FP" F35 function key -key_f36 "kf36" str "FQ" F36 function key -key_f37 "kf37" str "FR" F37 function key -key_f38 "kf38" str "FS" F38 function key -key_f39 "kf39" str "FT" F39 function key -key_f40 "kf40" str "FU" F40 function key -key_f41 "kf41" str "FV" F41 function key -key_f42 "kf42" str "FW" F42 function key -key_f43 "kf43" str "FX" F43 function key -key_f44 "kf44" str "FY" F44 function key -key_f45 "kf45" str "FZ" F45 function key -key_f46 "kf46" str "Fa" F46 function key -key_f47 "kf47" str "Fb" F47 function key -key_f48 "kf48" str "Fc" F48 function key -key_f49 "kf49" str "Fd" F49 function key -key_f50 "kf50" str "Fe" F50 function key -key_f51 "kf51" str "Ff" F51 function key -key_f52 "kf52" str "Fg" F52 function key -key_f53 "kf53" str "Fh" F53 function key -key_f54 "kf54" str "Fi" F54 function key -key_f55 "kf55" str "Fj" F55 function key -key_f56 "kf56" str "Fk" F56 function key -key_f57 "kf57" str "Fl" F57 function key -key_f58 "kf58" str "Fm" F58 function key -key_f59 "kf59" str "Fn" F59 function key -key_f60 "kf60" str "Fo" F60 function key -key_f61 "kf61" str "Fp" F61 function key -key_f62 "kf62" str "Fq" F62 function key -key_f63 "kf63" str "Fr" F63 function key -clr_bol "el1" str "cb" Clear to beginning of line -clear_margins "mgc" str "MC" clear righ and left soft margins -set_left_margin "smgl" str "ML" set left soft margin -set_right_margin "smgr" str "MR" set right soft margin -label_format "fln" str "Lf" label format -set_clock "sclk" str "SC" set clock -display_clock "dclk" str "DK" display clock -remove_clock "rmclk" str "RC" remove clock -create_window "cwin" str "CW" define a window #1 from #2, #3 to #4, #5 -goto_window "wingo" str "WG" go to window #1 -hangup "hup" str "HU" hang-up phone -dial_phone "dial" str "DI" dial number #1 -quick_dial "qdial" str "QD" dial number #1 without checking -tone "tone" str "TO" select touch tone dialing -pulse "pulse" str "PU" select pulse dialling -flash_hook "hook" str "fh" flash switch hook -fixed_pause "pause" str "PA" pause for 2-3 seconds -wait_tone "wait" str "WA" wait for dial-tone -user0 "u0" str "u0" User string # 0 -user1 "u1" str "u1" User string # 1 -user2 "u2" str "u2" User string # 2 -user3 "u3" str "u3" User string # 3 -user4 "u4" str "u4" User string # 4 -user5 "u5" str "u5" User string # 5 -user6 "u6" str "u6" User string # 6 -user7 "u7" str "u7" User string # 7 -user8 "u8" str "u8" User string # 8 -user9 "u9" str "u9" User string # 9 -orig_pair "op" str "op" set default color-pair to original one -orig_colors "oc" str "oc" set all color(-pair)s to the original ones -initialize_color "initc" str "Ic" initalize the definition of color -initialize_pair "initp" str "Ip" initalize color-pair -set_color_pair "scp" str "sp" set current color-pair -set_foreground "setf" str "Sf" set current forground color -set_background "setb" str "Sb" set current background color -change_char_pitch "cpi" str "ZA" change number of characters per inch -change_line_pitch "lpi" str "ZB" change number of lines per inch -change_res_horz "chr" str "ZC" change horizontal resolution -change_res_vert "cvr" str "ZD" change vertical resolution -define_char "defc" str "ZE" define a character in a character-set -enter_doublewide_mode "swidm" str "ZF" enter double wide printing -enter_draft_quality "sdrfq" str "ZG" enter draft quality mode -enter_italics_mode "sitm" str "ZH" enter italics mode -enter_leftward_mode "slm" str "ZI" enter leftware carriage motion -enter_micro_mode "smicm" str "ZJ" enable micro motion capabilities -enter_near_letter_quality "snlq" str "ZK" set near-letter quality printing -enter_normal_quality "snrmq" str "ZL" set normal quality print -enter_shadow_mode "sshm" str "ZM" enable shodow printing -enter_subscript_mode "ssubm" str "ZN" enter subscript mode -enter_superscript_mode "ssupm" str "ZO" enter superscript mode -enter_upward_mode "sum" str "ZP" enable upward carriage motion -exit_doublewide_mode "rwidm" str "ZQ" leave doulbe wide priting -exit_italics_mode "ritm" str "ZR" leave italics mode -exit_leftward_mode "rlm" str "ZS" enable rightward (normal) carriage motion -exit_micro_mode "rmicm" str "ZT" disable micro motion capabilities -exit_shadow_mode "rshm" str "ZU" disable shadow printing -exit_subscript_mode "rsubm" str "ZV" leave subscript mode -exit_superscript_mode "rsupm" str "ZW" leave superscript mode -exit_upward_mode "rum" str "ZX" enable downware (normal carriage mode -micro_column_address "mhpa" str "ZY" like column_address for micro adjustments -micro_down "mcud1" str "ZZ" like cursor_down for micro adjustments -micro_left "mcub1" str "Za" like cursor_left for micro adjustments -micro_right "mcuf1" str "Zb" like cursor_right for micro adjustments -micro_row_address "mvpa" str "Zc" like row_address for micro adjustments -micro_up "mcuu1" str "Zd" like cursor_up for micro adjustments -order_of_pins "porder" str "Ze" matches software bits to print-head bits -parm_down_micro "mcud" str "Zf" like param_down_cursor for micro adjust -parm_left_micro "mcub" str "Zg" like param_left_cursor for micro adjust -parm_right_micro "mcuf" str "Zh" like param_right_cursor for micro adjust -parm_up_micro "mcuu" str "Zi" like param_up_cursor for micro adjust -select_char_set "scs" str "Zj" select character set -set_bottom_margin "smgb" str "Zk" set bottom margin at current line -set_bottom_margin_parm "smgbp" str "Zl" set bottom margin at line #1 or #2 lines from bottom -set_left_margin_parm "smglp" str "Zm" set left (right) margin at column #1 (#2) -set_right_margin_parm "smgrp" str "Zn" set right margin at column #1 -set_top_margin "smgt" str "Zo" set top margin at current line -set_top_margin_parm "smgtp" str "Zp" set top (bottom) margin at line #1 (#2) -start_bit_image "sbim" str "Zq" start printing bit image graphics -start_char_set_def "scsd" str "Zr" start definition of a character set -stop_bit_image "rbim" str "Zs" end printing bit image graphics -stop_char_set_def "rcsd" str "Zt" end definition of a character set -subscript_characters "subcs" str "Zu" list of ``subscript-able'' characters -superscript_characters "supcs" str "Zv" list of ``supperscript-able'' characters -these_cause_cr "docr" str "Zw" printing any of these chars causes cr -zero_motion "zerom" str "Zx" no motion for the subsequent character -char_set_names "csnm" str "Zy" list of character set names -key_mouse "kmous" str "Km" 0631, Mouse even has occured -mouse_info "minfo" str "Mi" mouse status information -req_mouse_pos "reqmp" str "RQ" request mouse position report -get_mouse "getm" str "Gm" curses should get button events -set_a_foreground "setaf" str "AF" set foreground color using ANSI escape -set_a_background "setab" str "AB" set background color using ANSI escape -pkey_plab "pfxl" str "xl" prog key #1 to xmit string #2 and show string #3 -device_type "devt" str "dv" indicate language/codeset support -code_set_init "csin" str "ci" init sequence for multiple codesets -set0_des_seq "s0ds" str "s0" shift into codeset 0 (EUC set 0, ASCII) -set1_des_seq "s1ds" str "s1" shift into codeset 1 -set2_des_seq "s2ds" str "s2" shift into codeset 2 -set3_des_seq "s3ds" str "s3" shift into codeset 3 -set_lr_margin "smglr" str "ML" set both left and right margins -set_tb_margin "smgtb" str "MT" sets both top and bottom margins -bit_image_repeat "birep" str "Xy" repeat bit-image cell #1 #2 times (use tparm) -bit_image_newline "binel" str "Zz" move to next row of the bit image (use tparm) -bit_image_carriage_return "bicr" str "Yv" move to beginning of same row (use tparm) -color_names "colornm" str "Yw" give name for color #1 -define_bit_image_region "defbi" str "Yx" define rectangular bit-image region (use tparm) -end_bit_image_region "endbi" str "Yy" end a bit-image region (use tparm) -set_color_band "setcolor" str "Yz" change to ribbon color #1 -set_page_length "slines" str "YZ" set page lingth to #1 lines (use tparm) of an inch -display_pc_char "dispc" str "S1" display PC character -enter_pc_charset_mode "smpch" str "S2" enter PC character display mode -exit_pc_charset_mode "rmpch" str "S3" disable PC character display mode -enter_scancode_mode "smsc" str "S4" enter PC scancode mode -exit_scancode_mode "rmsc" str "S5" disable PC scancode mode -pc_term_options "pctrm" str "S6" pC terminal options -scancode_escape "scesc" str "S7" escape for scancode emultion -alt_scancode_esc "scesa" str "S8" alternate escape for scancode emultion (default is for vt100) -# These capabilities or either obselete or extentions on certain systems -# They are not used by SVR4 terminfo, so I have no idea in order they -# should be -backspace_if_not_bs "OTbc" str "bc" -other_non_function_keys "OTko" str "ko" -arrow_key_map "OTma" str "ma" -memory_lock_above "OTml" str "ml" -memory_unlock "OTmu" str "mu" -linefeed_if_not_lf "OTnl" str "nl" -key_interrupt_char "UWki" str "ki" -key_kill_char "UWkk" str "kk" -key_suspend_char "UWkz" str "kz" -scroll_left "sl1" str "Sl" -scroll_right "sr1" str "Sr" -parm_scroll_left "sl" str "SL" -parm_scroll_right "sr" str "SI" |