diff options
author | wpaul <wpaul@FreeBSD.org> | 1999-08-21 18:34:58 +0000 |
---|---|---|
committer | wpaul <wpaul@FreeBSD.org> | 1999-08-21 18:34:58 +0000 |
commit | db4fdbd041e22acdba198dd37ef7bcee12c2ac19 (patch) | |
tree | ff9ca0e10f95cee69324a33e193716046c3ecc8c /share/man | |
parent | a978a32098bf6ccd9c16b09e3d922613a6372e25 (diff) | |
download | FreeBSD-src-db4fdbd041e22acdba198dd37ef7bcee12c2ac19.zip FreeBSD-src-db4fdbd041e22acdba198dd37ef7bcee12c2ac19.tar.gz |
This commit adds device driver support for the Sundance Technologies ST201
PCI fast ethernet controller. Currently, the only card I know that uses
this chip is the D-Link DFE-550TX. (Don't ask me where to buy these: the
only cards I have are samples sent to me by D-Link.)
This driver is the first to make use of the miibus code once I'm sure
it all works together nicely, I'll start converting the other drivers.
The Sundance chip is a clone of the 3Com 3c90x Etherlink XL design
only with its own register layout. Support is provided for ifmedia,
hardware multicast filtering, bridging and promiscuous mode.
Diffstat (limited to 'share/man')
-rw-r--r-- | share/man/man4/man4.i386/Makefile | 7 | ||||
-rw-r--r-- | share/man/man4/man4.i386/ste.4 | 149 | ||||
-rw-r--r-- | share/man/man4/ste.4 | 149 |
3 files changed, 302 insertions, 3 deletions
diff --git a/share/man/man4/man4.i386/Makefile b/share/man/man4/man4.i386/Makefile index e02091e..fd1726e 100644 --- a/share/man/man4/man4.i386/Makefile +++ b/share/man/man4/man4.i386/Makefile @@ -1,4 +1,4 @@ -# $Id: Makefile,v 1.111 1999/07/25 04:32:39 wpaul Exp $ +# $Id: Makefile,v 1.112 1999/07/27 06:52:46 bde Exp $ MAN4= adv.4 adw.4 aha.4 ahb.4 ahc.4 aic.4 al.4 alpm.4 apm.4 ar.4 asc.4 \ atkbd.4 atkbdc.4 ax.4 bktr.4 bt.4 cs.4 cx.4 cy.4 de.4 \ @@ -7,8 +7,8 @@ MAN4= adv.4 adw.4 aha.4 ahb.4 ahc.4 aic.4 al.4 alpm.4 apm.4 ar.4 asc.4 \ mem.4 meteor.4 mouse.4 mse.4 mtio.4 mx.4 ncr.4 npx.4 \ ohci.4 pcf.4 pcm.4 pcvt.4 perfmon.4 pn.4 pnp.4 ppc.4 psm.4 \ rdp.4 rl.4 sb.4 scd.4 screen.4 sf.4 si.4 sio.4 sk.4 \ - spkr.4 splash.4 sr.4 syscons.4 sysmouse.4 ti.4 tl.4 tw.4 tx.4 uhci.4 \ - ukbd.4 umass.4 ums.4 usb.4 vga.4 vr.4 vx.4 \ + spkr.4 splash.4 sr.4 ste.4 syscons.4 sysmouse.4 ti.4 tl.4 tw.4 \ + tx.4 uhci.4 ukbd.4 umass.4 ums.4 usb.4 vga.4 vr.4 vx.4 \ wb.4 wd.4 wfd.4 wi.4 wl.4 wt.4 xl.4 ze.4 zp.4 MLINKS= adv.4 ../adv.4 @@ -80,6 +80,7 @@ MLINKS+= spkr.4 ../spkr.4 spkr.4 speaker.4 spkr.4 ../speaker.4 MLINKS+= splash.4 ../splash.4 \ splash.4 screensaver.4 splash.4 ../screensaver.4 MLINKS+= sr.4 ../sr.4 +MLINKS+= ste.4 ../ste.4 MLINKS+= syscons.4 ../syscons.4 MLINKS+= sysmouse.4 ../sysmouse.4 MLINKS+= ti.4 ../ti.4 diff --git a/share/man/man4/man4.i386/ste.4 b/share/man/man4/man4.i386/ste.4 new file mode 100644 index 0000000..9b4817d --- /dev/null +++ b/share/man/man4/man4.i386/ste.4 @@ -0,0 +1,149 @@ +.\" Copyright (c) 1997, 1998, 1999 +.\" Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" 3. All advertising materials mentioning features or use of this software +.\" must display the following acknowledgement: +.\" This product includes software developed by Bill Paul. +.\" 4. Neither the name of the author nor the names of any co-contributors +.\" may be used to endorse or promote products derived from this software +.\" without specific prior written permission. +.\" +.\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD +.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF +.\" THE POSSIBILITY OF SUCH DAMAGE. +.\" +.\" $Id$ +.\" +.Dd August 21, 1999 +.Dt STE 4 i386 +.Os FreeBSD +.Sh NAME +.Nm ste +.Nd +Sundance Technologies ST201 fast ethernet device driver +.Sh SYNOPSIS +.Cd "controller miibus0" +.Cd "device ste0" +.Sh DESCRIPTION +The +.Nm +driver provides support for PCI ethernet adapters and embedded +controllers based on the Sundance Technologies ST201 PCI fast +ethernet controller chip. This includes the D-Link DFE-550TX. +.Pp +The Sundance ST201 uses bus master DMA and is designed to be a +3Com Etherlink XL workalike. It uses the same DMA descriptor +structure and is very similar in operation, however its register +layout is different. The ST201 has a 64-bit multicast hash filter +and a single perfect filter entry for the station address. IT +supports both 10 and 100Mbps speeds in either full or half duplex +using an MII transceiver. +.Pp +The +.Nm +driver supports the following media types: +.Pp +.Bl -tag -width xxxxxxxxxxxxxxxxxxxx +.It autoselect +Enable autoselection of the media type and options. +The user can manually override +the autoselected mode by adding media options to the +.Pa /etc/rc.conf +fine. +.It 10baseT/UTP +Set 10Mbps operation. The +.Ar mediaopt +option can also be used to select either +.Ar full-duplex +or +.Ar half-duplex modes. +.It 100baseTX +Set 100Mbps (fast ethernet) operation. The +.Ar mediaopt +option can also be used to select either +.Ar full-duplex +or +.Ar half-duplex +modes. +.El +.Pp +The +.Nm +driver supports the following media options: +.Pp +.Bl -tag -width xxxxxxxxxxxxxxxxxxxx +.It full-duplex +Force full duplex operation +.It half-duplex +Force half duplex operation. +.El +.Pp +For more information on configuring this device, see +.Xr ifconfig 8 . +.Sh DIAGNOSTICS +.Bl -diag +.It "ste%d: couldn't map ports/memory" +A fatal initialization error has occurred. +.It "ste%d: couldn't map interrupt" +A fatal initialization error has occurred. +.It "ste%d: watchdog timeout" +The device has stopped responding to the network, or there is a problem with +the network connection (cable). +.It "ste%d: no memory for rx list" +The driver failed to allocate an mbuf for the receiver ring. +.It "ste%d: no memory for tx list" +The driver failed to allocate an mbuf for the transmitter ring when +allocating a pad buffer or collapsing an mbuf chain into a cluster. +.It "ste%d: chip is in D3 power state -- setting to D0" +This message applies only to adapters which support power +management. Some operating systems place the controller in low power +mode when shutting down, and some PCI BIOSes fail to bring the chip +out of this state before configuring it. The controller loses all of +its PCI configuration in the D3 state, so if the BIOS does not set +it back to full power mode in time, it won't be able to configure it +correctly. The driver tries to detect this condition and bring +the adapter back to the D0 (full power) state, but this may not be +enough to return the driver to a fully operational condition. If +you see this message at boot time and the driver fails to attach +the device as a network interface, you will have to perform second +warm boot to have the device properly configured. +.Pp +Note that this condition only occurs when warm booting from another +operating system. If you power down your system prior to booting +.Fx , +the card should be configured correctly. +.El +.Sh SEE ALSO +.Xr arp 4 , +.Xr netintro 4 , +.Xr ifconfig 8 +.Rs +.%T Sundance ST201 data sheet +.%O http://www.sundanceti.com +.Re +.Sh HISTORY +The +.Nm +device driver first appeared in +.Fx 3.0 . +.Sh AUTHORS +The +.Nm +driver was written by +.An Bill Paul Aq wpaul@ee.columbia.edu . diff --git a/share/man/man4/ste.4 b/share/man/man4/ste.4 new file mode 100644 index 0000000..9b4817d --- /dev/null +++ b/share/man/man4/ste.4 @@ -0,0 +1,149 @@ +.\" Copyright (c) 1997, 1998, 1999 +.\" Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. +.\" +.\" Redistribution and use in source and binary forms, with or without +.\" modification, are permitted provided that the following conditions +.\" are met: +.\" 1. Redistributions of source code must retain the above copyright +.\" notice, this list of conditions and the following disclaimer. +.\" 2. Redistributions in binary form must reproduce the above copyright +.\" notice, this list of conditions and the following disclaimer in the +.\" documentation and/or other materials provided with the distribution. +.\" 3. All advertising materials mentioning features or use of this software +.\" must display the following acknowledgement: +.\" This product includes software developed by Bill Paul. +.\" 4. Neither the name of the author nor the names of any co-contributors +.\" may be used to endorse or promote products derived from this software +.\" without specific prior written permission. +.\" +.\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND +.\" ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE +.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE +.\" ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD +.\" BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR +.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF +.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS +.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN +.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) +.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF +.\" THE POSSIBILITY OF SUCH DAMAGE. +.\" +.\" $Id$ +.\" +.Dd August 21, 1999 +.Dt STE 4 i386 +.Os FreeBSD +.Sh NAME +.Nm ste +.Nd +Sundance Technologies ST201 fast ethernet device driver +.Sh SYNOPSIS +.Cd "controller miibus0" +.Cd "device ste0" +.Sh DESCRIPTION +The +.Nm +driver provides support for PCI ethernet adapters and embedded +controllers based on the Sundance Technologies ST201 PCI fast +ethernet controller chip. This includes the D-Link DFE-550TX. +.Pp +The Sundance ST201 uses bus master DMA and is designed to be a +3Com Etherlink XL workalike. It uses the same DMA descriptor +structure and is very similar in operation, however its register +layout is different. The ST201 has a 64-bit multicast hash filter +and a single perfect filter entry for the station address. IT +supports both 10 and 100Mbps speeds in either full or half duplex +using an MII transceiver. +.Pp +The +.Nm +driver supports the following media types: +.Pp +.Bl -tag -width xxxxxxxxxxxxxxxxxxxx +.It autoselect +Enable autoselection of the media type and options. +The user can manually override +the autoselected mode by adding media options to the +.Pa /etc/rc.conf +fine. +.It 10baseT/UTP +Set 10Mbps operation. The +.Ar mediaopt +option can also be used to select either +.Ar full-duplex +or +.Ar half-duplex modes. +.It 100baseTX +Set 100Mbps (fast ethernet) operation. The +.Ar mediaopt +option can also be used to select either +.Ar full-duplex +or +.Ar half-duplex +modes. +.El +.Pp +The +.Nm +driver supports the following media options: +.Pp +.Bl -tag -width xxxxxxxxxxxxxxxxxxxx +.It full-duplex +Force full duplex operation +.It half-duplex +Force half duplex operation. +.El +.Pp +For more information on configuring this device, see +.Xr ifconfig 8 . +.Sh DIAGNOSTICS +.Bl -diag +.It "ste%d: couldn't map ports/memory" +A fatal initialization error has occurred. +.It "ste%d: couldn't map interrupt" +A fatal initialization error has occurred. +.It "ste%d: watchdog timeout" +The device has stopped responding to the network, or there is a problem with +the network connection (cable). +.It "ste%d: no memory for rx list" +The driver failed to allocate an mbuf for the receiver ring. +.It "ste%d: no memory for tx list" +The driver failed to allocate an mbuf for the transmitter ring when +allocating a pad buffer or collapsing an mbuf chain into a cluster. +.It "ste%d: chip is in D3 power state -- setting to D0" +This message applies only to adapters which support power +management. Some operating systems place the controller in low power +mode when shutting down, and some PCI BIOSes fail to bring the chip +out of this state before configuring it. The controller loses all of +its PCI configuration in the D3 state, so if the BIOS does not set +it back to full power mode in time, it won't be able to configure it +correctly. The driver tries to detect this condition and bring +the adapter back to the D0 (full power) state, but this may not be +enough to return the driver to a fully operational condition. If +you see this message at boot time and the driver fails to attach +the device as a network interface, you will have to perform second +warm boot to have the device properly configured. +.Pp +Note that this condition only occurs when warm booting from another +operating system. If you power down your system prior to booting +.Fx , +the card should be configured correctly. +.El +.Sh SEE ALSO +.Xr arp 4 , +.Xr netintro 4 , +.Xr ifconfig 8 +.Rs +.%T Sundance ST201 data sheet +.%O http://www.sundanceti.com +.Re +.Sh HISTORY +The +.Nm +device driver first appeared in +.Fx 3.0 . +.Sh AUTHORS +The +.Nm +driver was written by +.An Bill Paul Aq wpaul@ee.columbia.edu . |