mdoc: drop redundant .Pp and .LP calls

They have no effect when coming in pairs, or before .Bl/.Bd

80 files changed, 1 insertions, 112 deletions

diff --git a/share/man/man4/acpi_hp.4 b/share/man/man4/acpi_hp.4
index 94828d7..031d850 100644
--- a/share/man/man4/acpi_hp.4
+++ b/share/man/man4/acpi_hp.4
@@ -266,7 +266,6 @@ driver was written by
 .Pp
 It has been inspired by hp-wmi driver, which implements a subset of these
 features (hotkeys) on Linux.
-.Pp
 .Bl -tag -width indent
 .It HP CMI whitepaper:
 http://h20331.www2.hp.com/Hpsub/downloads/cmi_whitepaper.pdf
diff --git a/share/man/man4/aue.4 b/share/man/man4/aue.4
index 3737f24..c708c89 100644
--- a/share/man/man4/aue.4
+++ b/share/man/man4/aue.4
@@ -80,7 +80,6 @@ received and transmitted over separate USB bulk transfer endpoints.
 The
 .Nm
 driver supports the following media types:
-.Pp
 .Bl -tag -width xxxxxxxxxxxxxxxxxxxx
 .It autoselect
 Enable autoselection of the media type and options.
@@ -117,7 +116,6 @@ mode.
 The
 .Nm
 driver supports the following media options:
-.Pp
 .Bl -tag -width xxxxxxxxxxxxxxxxxxxx
 .It full-duplex
 Force full duplex operation.
diff --git a/share/man/man4/bpf.4 b/share/man/man4/bpf.4
index 85beb07..e69456a 100644
--- a/share/man/man4/bpf.4
+++ b/share/man/man4/bpf.4
@@ -804,7 +804,6 @@ are the corresponding fields in the
 instruction definition.
 .Dq len
 refers to the length of the packet.
-.Pp
 .Bl -tag -width BPF_STXx
 .It Dv BPF_LD
 These instructions copy a value into the accumulator.
@@ -833,7 +832,6 @@ or byte
 The semantics of all the recognized
 .Dv BPF_LD
 instructions follow.
-.Pp
 .Bd -literal
 BPF_LD+BPF_W+BPF_ABS	A <- P[k:4]
 BPF_LD+BPF_H+BPF_ABS	A <- P[k:2]
@@ -852,7 +850,6 @@ the addressing modes are more restrictive than those of the accumulator loads,
 but they include
 .Dv BPF_MSH ,
 a hack for efficiently loading the IP header length.
-.Pp
 .Bd -literal
 BPF_LDX+BPF_W+BPF_IMM	X <- k
 BPF_LDX+BPF_W+BPF_MEM	X <- M[k]
@@ -863,13 +860,11 @@ BPF_LDX+BPF_B+BPF_MSH	X <- 4*(P[k:1]&0xf)
 This instruction stores the accumulator into the scratch memory.
 We do not need an addressing mode since there is only one possibility
 for the destination.
-.Pp
 .Bd -literal
 BPF_ST			M[k] <- A
 .Ed
 .It Dv BPF_STX
 This instruction stores the index register in the scratch memory store.
-.Pp
 .Bd -literal
 BPF_STX			M[k] <- X
 .Ed
@@ -880,7 +875,6 @@ For binary operations, a source mode is required
 .Dv ( BPF_K
 or
 .Dv BPF_X ) .
-.Pp
 .Bd -literal
 BPF_ALU+BPF_ADD+BPF_K	A <- A + k
 BPF_ALU+BPF_SUB+BPF_K	A <- A - k
@@ -916,7 +910,6 @@ opcode uses the 32 bit
 .Li k
 field as the offset, allowing arbitrarily distant destinations.
 All conditionals use unsigned comparison conventions.
-.Pp
 .Bd -literal
 BPF_JMP+BPF_JA		pc += k
 BPF_JMP+BPF_JGT+BPF_K	pc += (A > k) ? jt : jf
@@ -936,7 +929,6 @@ The return value is either a constant
 .Pq Dv BPF_K
 or the accumulator
 .Pq Dv BPF_A .
-.Pp
 .Bd -literal
 BPF_RET+BPF_A		accept A bytes
 BPF_RET+BPF_K		accept k bytes
@@ -947,7 +939,6 @@ fit into the above classes, and for any new instructions that might need to
 be added.
 Currently, these are the register transfer instructions
 that copy the index register to the accumulator or vice versa.
-.Pp
 .Bd -literal
 BPF_MISC+BPF_TAX	X <- A
 BPF_MISC+BPF_TXA	A <- X
diff --git a/share/man/man4/bt.4 b/share/man/man4/bt.4
index be19819..c4c20e1 100644
--- a/share/man/man4/bt.4
+++ b/share/man/man4/bt.4
@@ -50,7 +50,6 @@ In
 This driver provides access to the
 .Tn SCSI
 bus connected to a Buslogic/Mylex MultiMaster or compatible controller:
-.Pp
 .Bd -ragged -offset indent
 .Bl -column "BT-956CD " "ISA " "Commands " Description
 MultiMaster "W" Series Host Adapters:
diff --git a/share/man/man4/bwi.4 b/share/man/man4/bwi.4
index c9f8a39..0dde87f 100644
--- a/share/man/man4/bwi.4
+++ b/share/man/man4/bwi.4
@@ -106,7 +106,6 @@ The v4 version of the firmware that
 uses does not support these chips.
 .Sh EXAMPLES
 Join an existing BSS network (i.e., connect to an access point):
-.Pp
 .Bd -literal -offset indent
 ifconfig wlan create wlandev bwi0 inet 192.168.0.20 \e
     netmask 0xffffff00
diff --git a/share/man/man4/bwn.4 b/share/man/man4/bwn.4
index 679f03e..f0d95bd 100644
--- a/share/man/man4/bwn.4
+++ b/share/man/man4/bwn.4
@@ -96,7 +96,6 @@ because the v4 version of the firmware does not support these chips.
 The newer firmware is too big to fit into these old chips.
 .Sh EXAMPLES
 Join an existing BSS network (i.e., connect to an access point):
-.Pp
 .Bd -literal -offset indent
 ifconfig wlan create wlandev bwn0 inet 192.168.0.20 \e
     netmask 0xffffff00
diff --git a/share/man/man4/cd.4 b/share/man/man4/cd.4
index ed88535..62b3577 100644
--- a/share/man/man4/cd.4
+++ b/share/man/man4/cd.4
@@ -102,7 +102,6 @@ in the header files
 .In sys/cdio.h
 and
 .In sys/disklabel.h .
-.Pp
 .Bl -tag -width CDIOCREADSUBCHANNEL
 .It Dv DIOCGDINFO
 .It Dv DIOCSDINFO
diff --git a/share/man/man4/ch.4 b/share/man/man4/ch.4
index 6bd2df4..b45ecaa 100644
--- a/share/man/man4/ch.4
+++ b/share/man/man4/ch.4
@@ -96,7 +96,6 @@ calls apply to the changer.
 They are defined
 in the header file
 .In sys/chio.h .
-.Pp
 .Bl -tag -width CHIOEXCHANGE
 .It Dv CHIOMOVE
 .Pq Vt "struct changer_move"
diff --git a/share/man/man4/cpuctl.4 b/share/man/man4/cpuctl.4
index bf1bdde..9e3a2aa 100644
--- a/share/man/man4/cpuctl.4
+++ b/share/man/man4/cpuctl.4
@@ -74,7 +74,6 @@ The
 structure is defined in
 .In sys/cpuctl.h
 as:
-.Pp
 .Bd -literal
 typedef struct {
 	int		msr;	/* MSR to read */
@@ -90,7 +89,6 @@ field.
 Retrieve CPUID information.
 Arguments are supplied in
 the following struct:
-.Pp
 .Bd -literal
 typedef struct {
 	int		level;	/* CPUID level */
@@ -108,7 +106,6 @@ Update CPU firmware (microcode).
 The structure is defined in
 .In sys/cpuctl.h
 as:
-.Pp
 .Bd -literal
 typedef struct {
 	void	*data;
diff --git a/share/man/man4/dc.4 b/share/man/man4/dc.4
index e24416c..6628d73 100644
--- a/share/man/man4/dc.4
+++ b/share/man/man4/dc.4
@@ -92,7 +92,6 @@ difficult to provide a complete list of all supported cards.
 The
 .Nm
 driver supports the following media types:
-.Pp
 .Bl -tag -width ".Cm 10baseT/UTP"
 .It Cm autoselect
 Enable autoselection of the media type and options.
@@ -138,7 +137,6 @@ mode.
 The
 .Nm
 driver supports the following media options:
-.Pp
 .Bl -tag -width ".Cm full-duplex"
 .It Cm full-duplex
 Force full duplex operation.
diff --git a/share/man/man4/ddb.4 b/share/man/man4/ddb.4
index 2e1d2f5..e3594cc 100644
--- a/share/man/man4/ddb.4
+++ b/share/man/man4/ddb.4
@@ -802,7 +802,6 @@ Displays short info about all currently mounted file systems.
 .Pp
 .It Ic show Cm mount Ar addr
 Displays details about the given mount point.
-.Pp
 .\"
 .Pp
 .It Ic show Cm object Ns Oo Li / Ns Cm f Oc Ar addr
diff --git a/share/man/man4/de.4 b/share/man/man4/de.4
index 28287ef..c9f25ad 100644
--- a/share/man/man4/de.4
+++ b/share/man/man4/de.4
@@ -55,7 +55,6 @@ chips.
 The
 .Nm
 driver supports the following media types:
-.Pp
 .Bl -tag -width xxxxxxxxxxxxxxx
 .It autoselect
 Enable autoselection of the media type and options
@@ -76,7 +75,6 @@ Set 100Mbps operation (4-pair cat-3 cable)
 The
 .Nm
 driver supports the following media options:
-.Pp
 .Bl -tag -width xxxxxxxxxxxxxxx
 .It full-duplex
 Set full duplex operation
diff --git a/share/man/man4/digi.4 b/share/man/man4/digi.4
index e33e365..f84ac78 100644
--- a/share/man/man4/digi.4
+++ b/share/man/man4/digi.4
@@ -51,7 +51,6 @@ likely be gone over with a fine tooth comb to reflect differences
 with the digi driver.
 .Pp
 When not defined the number is computed:
-.Pp
 .Bd -ragged -offset 4n
 default
 .Dv NDGBPORTS
diff --git a/share/man/man4/igmp.4 b/share/man/man4/igmp.4
index 7c711c4..696fa7d 100644
--- a/share/man/man4/igmp.4
+++ b/share/man/man4/igmp.4
@@ -61,7 +61,6 @@ they are only interested in receiving multicast streams from
 particular sources.
 .\"
 .Sh SYSCTL VARIABLES
-.Pp
 .Bl -tag -width indent
 .\"
 .It net.inet.igmp.stats
diff --git a/share/man/man4/inet.4 b/share/man/man4/inet.4
index ef189d3..e64b60a 100644
--- a/share/man/man4/inet.4
+++ b/share/man/man4/inet.4
@@ -141,7 +141,6 @@ they have the same form as the
 .Dv SIOCIFADDR
 command (see
 .Xr intro 4 ) .
-.Pp
 .Bl -tag -width SIOCSIFNETMASK
 .It Dv SIOCSIFNETMASK
 Set interface network mask.
diff --git a/share/man/man4/ipw.4 b/share/man/man4/ipw.4
index 060058a..cfa7de7 100644
--- a/share/man/man4/ipw.4
+++ b/share/man/man4/ipw.4
@@ -90,7 +90,6 @@ firmware license
 .El
 .Sh EXAMPLES
 Join an existing BSS network (i.e., connect to an access point):
-.Pp
 .Bd -literal -offset indent
 ifconfig wlan create wlandev ipw0 inet 192.168.0.20 \e
     netmask 0xffffff00
diff --git a/share/man/man4/iscsi_initiator.4 b/share/man/man4/iscsi_initiator.4
index 24cd898..7c857bd 100644
--- a/share/man/man4/iscsi_initiator.4
+++ b/share/man/man4/iscsi_initiator.4
@@ -64,7 +64,6 @@ the initiator part of the Session Identifier.
 .El
 .Pp
 The following are informative only:
-.Pp
 .Bl -tag -width "net.iscsi.n.targedaddress"
 .It Va net.iscsi.driver_version
 the current version of the driver.
diff --git a/share/man/man4/isp.4 b/share/man/man4/isp.4
index d3e9116..9de6da5 100644
--- a/share/man/man4/isp.4
+++ b/share/man/man4/isp.4
@@ -94,7 +94,6 @@ as it is the most likely to have been tested with this driver.
 Cards supported by the
 .Nm
 driver include:
-.Pp
 .Bl -tag -width xxxxxx -offset indent
 .It ISP1000
 SBus Fast Wide, Ultra Fast Wide cards, Single Ended or Differential
@@ -201,7 +200,6 @@ A hint value for a driver debug level (see the file
 for the values.
 .El
 .Sh SYSCTL OPTIONS
-.Pp
 .Bl -tag -width indent
 .It Va dev.isp.N.loop_down_limit
 This value says how long to wait in seconds after loop has gone down before
diff --git a/share/man/man4/iwi.4 b/share/man/man4/iwi.4
index 64f5c0ed..7428542 100644
--- a/share/man/man4/iwi.4
+++ b/share/man/man4/iwi.4
@@ -90,7 +90,6 @@ firmware license
 .El
 .Sh EXAMPLES
 Join an existing BSS network (i.e., connect to an access point):
-.Pp
 .Bd -literal -offset indent
 ifconfig wlan create wlandev iwi0 inet 192.168.0.20 \e
     netmask 0xffffff00
diff --git a/share/man/man4/iwn.4 b/share/man/man4/iwn.4
index 557d258..370241a 100644
--- a/share/man/man4/iwn.4
+++ b/share/man/man4/iwn.4
@@ -96,7 +96,6 @@ This driver requires the firmware built with the
 module to work.
 .Sh EXAMPLES
 Join an existing BSS network (i.e., connect to an access point):
-.Pp
 .Bd -literal -offset indent
 ifconfig wlan create wlandev iwn0 inet 192.168.0.20 \e
     netmask 0xffffff00
diff --git a/share/man/man4/joy.4 b/share/man/man4/joy.4
index b0839f5..4de2f5a 100644
--- a/share/man/man4/joy.4
+++ b/share/man/man4/joy.4
@@ -39,7 +39,6 @@ This device may be opened by only one process at a time.
 The joystick status is read from a structure via a read()
 call.
 The structure is defined in the header file as follows:
-.Pp
 .Bd -literal -offset indent
 	struct joystick {
 		int x;         /* x position */
diff --git a/share/man/man4/keyboard.4 b/share/man/man4/keyboard.4
index e1a5ac2..8cff292 100644
--- a/share/man/man4/keyboard.4
+++ b/share/man/man4/keyboard.4
@@ -63,7 +63,6 @@ The meaning of every key is programmable via the PIO_KEYMAP ioctl call, that
 takes a structure keymap_t as argument.
 The layout of this structure is as
 follows:
-.Pp
 .Bd -literal -offset indent
 		struct keymap {
 			u_short	n_keys;
diff --git a/share/man/man4/led.4 b/share/man/man4/led.4
index 63bb8a2..b31a083 100644
--- a/share/man/man4/led.4
+++ b/share/man/man4/led.4
@@ -169,7 +169,6 @@ A
 flashes
 .Pp
 .Dl *_*__**_
-.Pp
 .Bd -literal
 /usr/games/morse -l "Soekris rocks" > /dev/led/error
 .Ed
diff --git a/share/man/man4/lpbb.4 b/share/man/man4/lpbb.4
index 77e70c5..89b2a07 100644
--- a/share/man/man4/lpbb.4
+++ b/share/man/man4/lpbb.4
@@ -40,7 +40,6 @@
 The
 .Em lpbb
 driver supports the Philips official I2C parallel bit-banging interface.
-.Pp
 .Bd -literal
 
                                          LS05 pin 14 (Vcc) o      -------
diff --git a/share/man/man4/mac_biba.4 b/share/man/man4/mac_biba.4
index 265f571..7b7cf6e 100644
--- a/share/man/man4/mac_biba.4
+++ b/share/man/man4/mac_biba.4
@@ -151,7 +151,6 @@ In general, objects labels are represented in the following form:
 .Sm on
 .Pp
 For example:
-.Pp
 .Bd -literal -offset indent
 biba/10:2+3+6
 biba/low
diff --git a/share/man/man4/mac_lomac.4 b/share/man/man4/mac_lomac.4
index e825137..80f2daf 100644
--- a/share/man/man4/mac_lomac.4
+++ b/share/man/man4/mac_lomac.4
@@ -108,7 +108,6 @@ In general, objects labels are represented in the following form:
 .Sm on
 .Pp
 For example:
-.Pp
 .Bd -literal -offset indent
 lomac/10[2]
 lomac/low
diff --git a/share/man/man4/mac_portacl.4 b/share/man/man4/mac_portacl.4
index 698852d..2ecee26 100644
--- a/share/man/man4/mac_portacl.4
+++ b/share/man/man4/mac_portacl.4
@@ -139,7 +139,6 @@ The port access control list is specified in the following format:
 .Sm off
 .D1 Ar idtype : id : protocol : port Op , Ar idtype : id : protocol : port , ...
 .Sm on
-.Pp
 .Bl -tag -width ".Ar protocol"
 .It Ar idtype
 Describes the type of subject match to be performed.
diff --git a/share/man/man4/malo.4 b/share/man/man4/malo.4
index 8a3c723..eb8c2ed 100644
--- a/share/man/man4/malo.4
+++ b/share/man/man4/malo.4
@@ -97,7 +97,6 @@ U-Khan UW-2054i	88W8335	PCI	b/g
 .El
 .Sh EXAMPLES
 Join an existing BSS network (i.e., connect to an access point):
-.Pp
 .Bd -literal -offset indent
 ifconfig wlan create wlandev malo0 inet 192.168.0.20 \e
     netmask 0xffffff00
diff --git a/share/man/man4/meteor.4 b/share/man/man4/meteor.4
index 860e08e..77765de 100644
--- a/share/man/man4/meteor.4
+++ b/share/man/man4/meteor.4
@@ -468,7 +468,6 @@ routines use the
 .Va meteor_geomet
 structure that has the
 following entries:
-.Pp
 .Bl -tag -width columns
 .It Va rows
 number of rows (lines high) in output image
diff --git a/share/man/man4/mk48txx.4 b/share/man/man4/mk48txx.4
index d1ed563..66f9519 100644
--- a/share/man/man4/mk48txx.4
+++ b/share/man/man4/mk48txx.4
@@ -65,7 +65,6 @@ function and the mk48txx_softc structure defined as follows:
 .Pp
 .Ft "int"
 .Fn mk48txx_attach "device_t dev"
-.Pp
 .Bd -literal
 typedef uint8_t (*mk48txx_nvrd_t)(device_t dev, int off);
 typedef void (*mk48txx_nvwr_t)(device_t dev, int off, uint8_t v);
@@ -84,7 +83,6 @@ struct mk48txx_softc {
 	mk48txx_nvwr_t	sc_nvwr;
 };
 .Ed
-.Pp
 .Bl -tag -width indent
 .It Fa sc_res
 The bus resource used for accessing the chip's non-volatile memory
diff --git a/share/man/man4/mld.4 b/share/man/man4/mld.4
index c43d472..b761bb1 100644
--- a/share/man/man4/mld.4
+++ b/share/man/man4/mld.4
@@ -66,7 +66,6 @@ The retransmission of state-change reports adds some robustness
 to the protocol.
 .\"
 .Sh SYSCTL VARIABLES
-.Pp
 .Bl -tag -width indent
 .\"
 .It net.inet6.mld.stats
diff --git a/share/man/man4/mtio.4 b/share/man/man4/mtio.4
index 735da63..0b60b1e 100644
--- a/share/man/man4/mtio.4
+++ b/share/man/man4/mtio.4
@@ -52,7 +52,6 @@ are control devices that can be used to issue ioctls to the SCSI
 tape driver to set parameters that are required to last beyond the
 unmounting of a tape.
 .Pp
-.Pp
 The rewind devices automatically rewind
 when the last requested read, write or seek has finished, or the end of the tape
 has been reached.
diff --git a/share/man/man4/mwl.4 b/share/man/man4/mwl.4
index 32138c8..1864647 100644
--- a/share/man/man4/mwl.4
+++ b/share/man/man4/mwl.4
@@ -112,7 +112,6 @@ driver come in either Cardbus or mini-PCI packages.
 Wireless cards in Cardbus slots may be inserted and ejected on the fly.
 .Sh EXAMPLES
 Join an existing BSS network (ie: connect to an access point):
-.Pp
 .Bd -literal -offset indent
 ifconfig wlan create wlandev mwl0 inet 192.168.0.20 \e
 	netmask 0xffffff00"
@@ -120,7 +119,6 @@ ifconfig wlan create wlandev mwl0 inet 192.168.0.20 \e
 .Pp
 Join a specific BSS network with network name
 .Dq Li my_net :
-.Pp
 .Bd -literal -offset indent
 ifconfig wlan create wlandev mwl0 inet 192.168.0.20 \e
 	netmask 0xffffff00 ssid my_net"
diff --git a/share/man/man4/netintro.4 b/share/man/man4/netintro.4
index 3e98940..c0629e1 100644
--- a/share/man/man4/netintro.4
+++ b/share/man/man4/netintro.4
@@ -409,7 +409,6 @@ struct ifaliasreq {
         struct  sockaddr        ifra_mask;
 };
 .Ed
-.Pp
 .Bd -literal
 /*
 * Structure used in SIOCGIFCONF request.
@@ -427,7 +426,6 @@ struct ifconf {
 #define ifc_req ifc_ifcu.ifcu_req /* array of structures returned */
 };
 .Ed
-.Pp
 .Bd -literal
 /* Structure used in SIOCIFGCLONERS request. */
 struct if_clonereq {
diff --git a/share/man/man4/ng_UI.4 b/share/man/man4/ng_UI.4
index 0f48d4b..2054d19 100644
--- a/share/man/man4/ng_UI.4
+++ b/share/man/man4/ng_UI.4
@@ -65,7 +65,6 @@ will have a 0x03 byte prepended to them before being forwarded out on the
 hook.
 .Sh HOOKS
 This node type supports the following hooks:
-.Pp
 .Bl -tag -width foobar
 .It Dv downstream
 Downstream connection.
diff --git a/share/man/man4/ng_async.4 b/share/man/man4/ng_async.4
index 4f7a2e1..bb6b0be 100644
--- a/share/man/man4/ng_async.4
+++ b/share/man/man4/ng_async.4
@@ -88,7 +88,6 @@ Flag sharing between frames is disabled after one second of transmit
 idle time.
 .Sh HOOKS
 This node type supports the following hooks:
-.Pp
 .Bl -tag -width foobar
 .It Dv async
 Asynchronous connection.
diff --git a/share/man/man4/ng_cisco.4 b/share/man/man4/ng_cisco.4
index 2cccb76..d2b382f 100644
--- a/share/man/man4/ng_cisco.4
+++ b/share/man/man4/ng_cisco.4
@@ -114,7 +114,6 @@ understands the
 message.
 .Sh HOOKS
 This node type supports the following hooks:
-.Pp
 .Bl -tag -width foobarbazio
 .It Dv downstream
 The connection to the synchronous line.
diff --git a/share/man/man4/ng_frame_relay.4 b/share/man/man4/ng_frame_relay.4
index 79e18e6..edc8a8c 100644
--- a/share/man/man4/ng_frame_relay.4
+++ b/share/man/man4/ng_frame_relay.4
@@ -63,7 +63,6 @@ through
 are available to connect to each of the DLCI channels.
 .Sh HOOKS
 This node type supports the following hooks:
-.Pp
 .Bl -tag -width foobar
 .It Dv downstream
 The connection to the synchronous line.
diff --git a/share/man/man4/ng_gif.4 b/share/man/man4/ng_gif.4
index 28a0588..6c4dad2 100644
--- a/share/man/man4/ng_gif.4
+++ b/share/man/man4/ng_gif.4
@@ -99,7 +99,6 @@ packet attached to the front.
 When no hooks are connected, packets flow normally upwards and downwards.
 .Sh HOOKS
 This node type supports the following hooks:
-.Pp
 .Bl -tag -width ".Dv orphans"
 .It Dv lower
 Connection to the lower device link layer.
diff --git a/share/man/man4/ng_iface.4 b/share/man/man4/ng_iface.4
index 90563b8..76ec47f 100644
--- a/share/man/man4/ng_iface.4
+++ b/share/man/man4/ng_iface.4
@@ -83,7 +83,6 @@ The default mode is point-to-point.
 nodes support the Berkeley Packet Filter (BPF).
 .Sh HOOKS
 This node type supports the following hooks:
-.Pp
 .Bl -tag -width foobar
 .It Dv inet
 Transmission and reception of IP packets.
diff --git a/share/man/man4/ng_l2cap.4 b/share/man/man4/ng_l2cap.4
index bd050fc..d4b7815 100644
--- a/share/man/man4/ng_l2cap.4
+++ b/share/man/man4/ng_l2cap.4
@@ -209,7 +209,6 @@ L2CAP does not support the concept of a global group name.
 .El
 .Sh HOOKS
 This node type supports the following hooks:
-.Pp
 .Bl -tag -width indent
 .It Dv hci
 Bluetooth Host Controller Interface downstream hook.
diff --git a/share/man/man4/ng_lmi.4 b/share/man/man4/ng_lmi.4
index 4dc7fdf..a8fed52 100644
--- a/share/man/man4/ng_lmi.4
+++ b/share/man/man4/ng_lmi.4
@@ -82,7 +82,6 @@ This node also supports the
 control message.
 .Sh HOOKS
 This node type supports the following hooks:
-.Pp
 .Bl -tag -width foobarbaz
 .It Dv annexA
 ITU Annex A LMI hook.
diff --git a/share/man/man4/ng_pppoe.4 b/share/man/man4/ng_pppoe.4
index fef3d2c..32efa69 100644
--- a/share/man/man4/ng_pppoe.4
+++ b/share/man/man4/ng_pppoe.4
@@ -67,7 +67,6 @@ the
 control message.
 .Sh HOOKS
 This node type supports the following hooks:
-.Pp
 .Bl -tag -width [unspecified]
 .It Dv ethernet
 The hook that should normally be connected to an
diff --git a/share/man/man4/ng_rfc1490.4 b/share/man/man4/ng_rfc1490.4
index 54b327e..472b308 100644
--- a/share/man/man4/ng_rfc1490.4
+++ b/share/man/man4/ng_rfc1490.4
@@ -78,7 +78,6 @@ hook of an
 node.
 .Sh HOOKS
 This node type supports the following hooks:
-.Pp
 .Bl -tag -width foobarbazum
 .It Dv downstream
 Connects to the RFC 1490 peer entity.
diff --git a/share/man/man4/ng_tee.4 b/share/man/man4/ng_tee.4
index a914ab5..84801b7 100644
--- a/share/man/man4/ng_tee.4
+++ b/share/man/man4/ng_tee.4
@@ -88,7 +88,6 @@ and
 respectively.
 .Sh HOOKS
 This node type supports the following hooks:
-.Pp
 .Bl -tag -width foobarbarfoo
 .It Dv right
 The connection to the node on the right.
diff --git a/share/man/man4/ng_tty.4 b/share/man/man4/ng_tty.4
index ec5b4c8..75e1b40 100644
--- a/share/man/man4/ng_tty.4
+++ b/share/man/man4/ng_tty.4
@@ -80,7 +80,6 @@ type node.
 The hot character has no effect on the transmission of data.
 .Sh HOOKS
 This node type supports the following hooks:
-.Pp
 .Bl -tag -width foobar
 .It Dv hook
 .Xr tty 4
diff --git a/share/man/man4/ng_vjc.4 b/share/man/man4/ng_vjc.4
index da0c37b..714aa7e 100644
--- a/share/man/man4/ng_vjc.4
+++ b/share/man/man4/ng_vjc.4
@@ -103,7 +103,6 @@ and
 hooks, respectively.
 .Sh HOOKS
 This node type supports the following hooks:
-.Pp
 .Bl -tag -width foobarbazi
 .It Dv ip
 Upstream (uncompressed) IP packets.
diff --git a/share/man/man4/pcn.4 b/share/man/man4/pcn.4
index af0fdee..82720c9 100644
--- a/share/man/man4/pcn.4
+++ b/share/man/man4/pcn.4
@@ -71,7 +71,6 @@ for the station address and a 64-bit multicast hash table.
 The
 .Nm
 driver supports the following media types:
-.Pp
 .Bl -tag -width 10baseTXUTP
 .It autoselect
 Enable autoselection of the media type and options.
@@ -103,7 +102,6 @@ modes.
 The
 .Nm
 driver supports the following media options:
-.Pp
 .Bl -tag -width full-duplex
 .It full-duplex
 Force full duplex operation
diff --git a/share/man/man4/psm.4 b/share/man/man4/psm.4
index ef23612..9c10e23 100644
--- a/share/man/man4/psm.4
+++ b/share/man/man4/psm.4
@@ -226,7 +226,6 @@ Set them in
 (see
 .Sx EXAMPLES
 below).
-.Pp
 .Bl -tag -width MOUSE
 .It bit 0..3 RESOLUTION
 This flag specifies the resolution of the pointing device.
diff --git a/share/man/man4/pt.4 b/share/man/man4/pt.4
index b45ae5a..4400af9 100644
--- a/share/man/man4/pt.4
+++ b/share/man/man4/pt.4
@@ -57,7 +57,6 @@ and the
 .Xr ioctl 2
 calls described below.
 .Sh IOCTLS
-.Bl -tag -width 012345678901234
 The following
 .Xr ioctl 2
 calls are supported by the
@@ -65,7 +64,7 @@ calls are supported by the
 driver.
 They are defined in the header file
 .In sys/ptio.h .
-.Pp
+.Bl -tag -width 012345678901234
 .It PTIOCGETTIMEOUT
 This ioctl allows userland applications to fetch the current
 .Nm
diff --git a/share/man/man4/pts.4 b/share/man/man4/pts.4
index 88eb29c..49e84ef 100644
--- a/share/man/man4/pts.4
+++ b/share/man/man4/pts.4
@@ -139,7 +139,6 @@ should not be used directly. It is used to implement routines like
 .Sh FILES
 The files used by this
 pseudo-terminals implementation are:
-.Pp
 .Bl -tag -width ".Pa /dev/pts/[num]"
 .It Pa /dev/pts/[num]
 Pseudo-terminal slave devices.
diff --git a/share/man/man4/pty.4 b/share/man/man4/pty.4
index f72a8be..80b584f 100644
--- a/share/man/man4/pty.4
+++ b/share/man/man4/pty.4
@@ -63,7 +63,6 @@ was being called.
 .Sh FILES
 The BSD-style compatibility pseudo-terminal driver uses the following
 device names:
-.Pp
 .Bl -tag -width ".Pa /dev/pty[l-sL-S][0-9a-v]"
 .It Pa /dev/pty[l-sL-S][0-9a-v]
 Pseudo-terminal master devices.
diff --git a/share/man/man4/ral.4 b/share/man/man4/ral.4
index 25fb343..0b13d08 100644
--- a/share/man/man4/ral.4
+++ b/share/man/man4/ral.4
@@ -198,7 +198,6 @@ Join an existing BSS network (i.e., connect to an access point):
 .Pp
 Join a specific BSS network with network name
 .Dq Li my_net :
-.Pp
 .Bd -literal -offset indent
 ifconfig wlan create wlandev ral0 inet 192.168.0.20 \e
     netmask 0xffffff00 ssid my_net
diff --git a/share/man/man4/random.4 b/share/man/man4/random.4
index cccd89c..9ba00c0 100644
--- a/share/man/man4/random.4
+++ b/share/man/man4/random.4
@@ -73,7 +73,6 @@ device, use the command line:
 .Dl sysctl kern.random
 .Pp
 which results in something like:
-.Pp
 .Bd -literal -offset indent
 kern.random.sys.seeded: 1
 kern.random.sys.harvest.ethernet: 1
diff --git a/share/man/man4/rl.4 b/share/man/man4/rl.4
index d88a25f..33db966 100644
--- a/share/man/man4/rl.4
+++ b/share/man/man4/rl.4
@@ -84,7 +84,6 @@ driver.
 The
 .Nm
 driver supports the following media types:
-.Pp
 .Bl -tag -width xxxxxxxxxxxxxxxxxxxx
 .It autoselect
 Enable autoselection of the media type and options.
@@ -118,7 +117,6 @@ modes.
 The
 .Nm
 driver supports the following media options:
-.Pp
 .Bl -tag -width xxxxxxxxxxxxxxxxxxxx
 .It full-duplex
 Force full duplex operation
diff --git a/share/man/man4/rum.4 b/share/man/man4/rum.4
index 82e25f5..fd407f8 100644
--- a/share/man/man4/rum.4
+++ b/share/man/man4/rum.4
@@ -122,7 +122,6 @@ including:
 .El
 .Sh EXAMPLES
 Join an existing BSS network (i.e., connect to an access point):
-.Pp
 .Bd -literal -offset indent
 ifconfig wlan create wlandev rum0 inet 192.168.0.20 \e
     netmask 0xffffff00
diff --git a/share/man/man4/run.4 b/share/man/man4/run.4
index 8f00eb2..27a7393 100644
--- a/share/man/man4/run.4
+++ b/share/man/man4/run.4
@@ -152,7 +152,6 @@ driver supports the following wireless adapters:
 .El
 .Sh EXAMPLES
 Join an existing BSS network (i.e., connect to an access point):
-.Pp
 .Bd -literal -offset indent
 ifconfig wlan create wlandev run0 inet 192.168.0.20 \e
     netmask 0xffffff00
diff --git a/share/man/man4/screen.4 b/share/man/man4/screen.4
index 2f76f59..0b6ac2d 100644
--- a/share/man/man4/screen.4
+++ b/share/man/man4/screen.4
@@ -57,7 +57,6 @@ The console understands a subset of the ANSI x3.64 character
 sequences.
 For compatibility with the old pccons, the PC3 character
 sequences are also supported.
-.Pp
 .Bd -literal
 ANSI	Seq	Function				Termcap entry
 ======= ======= =====================================   ==============
diff --git a/share/man/man4/send.4 b/share/man/man4/send.4
index 35ed77f..9cfcd53 100644
--- a/share/man/man4/send.4
+++ b/share/man/man4/send.4
@@ -70,7 +70,6 @@ Struct sockaddr_send is defined in
 It defines the total length of the structure, the address family, packet's
 incoming or outgoing direction from the interface's point of view, and the
 interface index.
-.Pp
 .Bd -literal
 struct sockaddr_send {
         unsigned char           send_len;       /* total length */
diff --git a/share/man/man4/ses.4 b/share/man/man4/ses.4
index 4070c89..3d95285 100644
--- a/share/man/man4/ses.4
+++ b/share/man/man4/ses.4
@@ -79,7 +79,6 @@ devices.
 They are defined in the header file
 .In cam/scsi/scsi_ses.h
 (\fIq.v.\fR).
-.Pp
 .Bl -tag -width SESIOC_GETENCSTAT
 .It Dv SESIOC_GETNOBJ
 Used to find out how many
diff --git a/share/man/man4/sf.4 b/share/man/man4/sf.4
index ce943f8..80ba44e 100644
--- a/share/man/man4/sf.4
+++ b/share/man/man4/sf.4
@@ -81,7 +81,6 @@ driver.
 The
 .Nm
 driver supports the following media types:
-.Pp
 .Bl -tag -width xxxxxxxxxxxxxxxxxxxx
 .It autoselect
 Enable autoselection of the media type and options.
@@ -112,7 +111,6 @@ modes.
 The
 .Nm
 driver supports the following media options:
-.Pp
 .Bl -tag -width xxxxxxxxxxxxxxxxxxxx
 .It full-duplex
 Force full duplex operation
diff --git a/share/man/man4/sis.4 b/share/man/man4/sis.4
index a1e1db8..365b0a2 100644
--- a/share/man/man4/sis.4
+++ b/share/man/man4/sis.4
@@ -80,7 +80,6 @@ by the same driver.
 The
 .Nm
 driver supports the following media types:
-.Pp
 .Bl -tag -width 10baseTXUTP
 .It autoselect
 Enable autoselection of the media type and options.
@@ -112,7 +111,6 @@ modes.
 The
 .Nm
 driver supports the following media options:
-.Pp
 .Bl -tag -width full-duplex
 .It full-duplex
 Force full duplex operation
diff --git a/share/man/man4/sk.4 b/share/man/man4/sk.4
index d25c439..88a4286 100644
--- a/share/man/man4/sk.4
+++ b/share/man/man4/sk.4
@@ -97,7 +97,6 @@ such as file transfers and data streaming.
 The
 .Nm
 driver supports the following media types:
-.Pp
 .Bl -tag -width xxxxxxxxxxxxxxxxxxxx
 .It autoselect
 Enable autoselection of the media type and options.
@@ -126,7 +125,6 @@ modes are supported.
 The
 .Nm
 driver supports the following media options:
-.Pp
 .Bl -tag -width xxxxxxxxxxxxxxxxxxxx
 .It full-duplex
 Force full duplex operation
@@ -137,7 +135,6 @@ Force half duplex operation.
 The
 .Nm
 driver also supports one special link option for 1000baseTX cards:
-.Pp
 .Bl -tag -width xxxxxxxxxxxxxxxxxxxx
 .It link0
 With 1000baseTX cards, establishing a link between two ports requires
diff --git a/share/man/man4/smb.4 b/share/man/man4/smb.4
index 620b102..afe4605 100644
--- a/share/man/man4/smb.4
+++ b/share/man/man4/smb.4
@@ -45,7 +45,6 @@ with the ioctls described below.
 Any of these ioctl commands takes a pointer to
 .Vt struct smbcmd
 as its argument.
-.Pp
 .Bd -literal
 #include <sys/types.h>
 
diff --git a/share/man/man4/snd_hda.4 b/share/man/man4/snd_hda.4
index cd78c0f..9325788 100644
--- a/share/man/man4/snd_hda.4
+++ b/share/man/man4/snd_hda.4
@@ -463,7 +463,6 @@ On headphones connection rear connectors will be muted.
 Depending on codec configuration, these controls and signal sources could be
 reported to
 .Xr sound 4 :
-.Pp
 .Bl -tag -width ".Va speaker" -offset indent
 .It Va vol
 overall output level (volume)
diff --git a/share/man/man4/ste.4 b/share/man/man4/ste.4
index fabef6d..02644ae 100644
--- a/share/man/man4/ste.4
+++ b/share/man/man4/ste.4
@@ -71,7 +71,6 @@ using an MII transceiver.
 The
 .Nm
 driver supports the following media types:
-.Pp
 .Bl -tag -width xxxxxxxxxxxxxxxxxxxx
 .It autoselect
 Enable autoselection of the media type and options.
@@ -102,7 +101,6 @@ modes.
 The
 .Nm
 driver supports the following media options:
-.Pp
 .Bl -tag -width xxxxxxxxxxxxxxxxxxxx
 .It full-duplex
 Force full duplex operation
diff --git a/share/man/man4/sym.4 b/share/man/man4/sym.4
index 547d205..205fe86 100644
--- a/share/man/man4/sym.4
+++ b/share/man/man4/sym.4
@@ -225,7 +225,6 @@ The Symbios/Logic NVRAM layout and the Tekram NVRAM
 layout are currently supported.
 If the reading of the NVRAM succeeds, the
 following settings are taken into account and reported to CAM:
-.Pp
 .Bl -column "SCSI parity checking" "Symbios"
 .It Em "Host settings	Symbios	Tekram"
 .It "SCSI parity checking	Y	N"
@@ -254,7 +253,6 @@ command.
 .Pp
 The table below summarizes the main features and capabilities of the
 NCR/Symbios/LSI Logic 53C8XX family of PCI SCSI controllers.
-.Pp
 .Bl -column sym53c1510d "80MHz" "Width" "SRAM" "PCI64"
 .It Em "Chip	Sync	Width	SRAM	PCI64	Supported"
 .It "sym53c810	10MHz	8Bit	N	N	Y"
diff --git a/share/man/man4/syscons.4 b/share/man/man4/syscons.4
index acc6c66..7685c89 100644
--- a/share/man/man4/syscons.4
+++ b/share/man/man4/syscons.4
@@ -466,7 +466,6 @@ As the
 .Nm
 driver requires the keyboard driver and the video card driver,
 the kernel configuration file should contain the following lines.
-.Pp
 .Bd -literal -offset indent
 device atkbdc
 device atkbd
diff --git a/share/man/man4/ti.4 b/share/man/man4/ti.4
index ba999e2..269b6cf 100644
--- a/share/man/man4/ti.4
+++ b/share/man/man4/ti.4
@@ -116,7 +116,6 @@ man page for more details.
 The
 .Nm
 driver supports the following media types:
-.Pp
 .Bl -tag -width xxxxxxxxxxxxxxxxxxxx
 .It autoselect
 Enable autoselection of the media type and options.
@@ -152,7 +151,6 @@ mode is supported at this speed.
 The
 .Nm
 driver supports the following media options:
-.Pp
 .Bl -tag -width xxxxxxxxxxxxxxxxxxxx
 .It full-duplex
 Force full duplex operation
diff --git a/share/man/man4/tl.4 b/share/man/man4/tl.4
index 3dd4cba..eb8351d 100644
--- a/share/man/man4/tl.4
+++ b/share/man/man4/tl.4
@@ -74,7 +74,6 @@ built-in PHY and the DP83840A also support autonegotiation.
 The
 .Nm
 driver supports the following media types:
-.Pp
 .Bl -tag -width xxxxxxxxxxxxxxxxxxxx
 .It autoselect
 Enable autoselection of the media type and options.
@@ -93,7 +92,6 @@ Enable AUI/BNC interface (useful only with the built-in PHY).
 The
 .Nm
 driver supports the following media options:
-.Pp
 .Bl -tag -width xxxxxxxxxxxxxxxxxxxx
 .It full-duplex
 Force full duplex operation
diff --git a/share/man/man4/tx.4 b/share/man/man4/tx.4
index f0cda0e..2f7ea59 100644
--- a/share/man/man4/tx.4
+++ b/share/man/man4/tx.4
@@ -56,7 +56,6 @@ These are mostly SMC 9432 series cards.
 The
 .Nm
 driver supports the following media types (depending on card's capabilities):
-.Pp
 .Bl -tag -width ".Cm 10baseT/UTP"
 .It Cm autoselect
 Enable autonegotiation (default).
diff --git a/share/man/man4/uath.4 b/share/man/man4/uath.4
index 4ef898e..ad11809 100644
--- a/share/man/man4/uath.4
+++ b/share/man/man4/uath.4
@@ -122,7 +122,6 @@ An up to date list can be found at
 .Pa http://customerproducts.atheros.com/customerproducts/default.asp .
 .Sh EXAMPLES
 Join an existing BSS network (i.e., connect to an access point):
-.Pp
 .Bd -literal -offset indent
 ifconfig wlan create wlandev uath0 inet 192.168.0.20 \e
     netmask 0xffffff00
diff --git a/share/man/man4/upgt.4 b/share/man/man4/upgt.4
index 06c5eb5..7042dd7 100644
--- a/share/man/man4/upgt.4
+++ b/share/man/man4/upgt.4
@@ -178,7 +178,6 @@ Spinnaker Proto Board
 .El
 .Sh EXAMPLES
 Join an existing BSS network (i.e., connect to an access point):
-.Pp
 .Bd -literal -offset indent
 ifconfig wlan create wlandev upgt0 inet 192.168.0.20 \e
     netmask 0xffffff00
diff --git a/share/man/man4/ural.4 b/share/man/man4/ural.4
index 3825166..4ae6c18 100644
--- a/share/man/man4/ural.4
+++ b/share/man/man4/ural.4
@@ -105,7 +105,6 @@ An up to date list can be found at
 .Pa http://ralink.rapla.net/ .
 .Sh EXAMPLES
 Join an existing BSS network (i.e., connect to an access point):
-.Pp
 .Bd -literal -offset indent
 ifconfig wlan create wlandev ural0 inet 192.168.0.20 \e
     netmask 0xffffff00
diff --git a/share/man/man4/urtw.4 b/share/man/man4/urtw.4
index a3f27a0..58f291f 100644
--- a/share/man/man4/urtw.4
+++ b/share/man/man4/urtw.4
@@ -83,7 +83,6 @@ driver supports Realtek RTL8187B/L based wireless network devices, including:
 .El
 .Sh EXAMPLES
 Join an existing BSS network (i.e., connect to an access point):
-.Pp
 .Bd -literal -offset indent
 ifconfig wlan create wlandev urtw0 inet 192.168.0.20 \e
     netmask 0xffffff00
diff --git a/share/man/man4/vr.4 b/share/man/man4/vr.4
index 4839c30..de65fe1 100644
--- a/share/man/man4/vr.4
+++ b/share/man/man4/vr.4
@@ -77,7 +77,6 @@ They support both
 The
 .Nm
 driver supports the following media types:
-.Pp
 .Bl -tag -width xxxxxxxxxxxxxxxxxxxx
 .It autoselect
 Enable autoselection of the media type and options.
@@ -108,7 +107,6 @@ modes.
 The
 .Nm
 driver supports the following media options:
-.Pp
 .Bl -tag -width xxxxxxxxxxxxxxxxxxxx
 .It full-duplex
 Force full duplex operation
diff --git a/share/man/man4/wb.4 b/share/man/man4/wb.4
index 2dd51b6..038af89 100644
--- a/share/man/man4/wb.4
+++ b/share/man/man4/wb.4
@@ -73,7 +73,6 @@ supports both 10 and 100Mbps speeds in either full or half duplex.
 The
 .Nm
 driver supports the following media types:
-.Pp
 .Bl -tag -width xxxxxxxxxxxxxxxxxxxx
 .It autoselect
 Enable autoselection of the media type and options.
@@ -107,7 +106,6 @@ modes.
 The
 .Nm
 driver supports the following media options:
-.Pp
 .Bl -tag -width xxxxxxxxxxxxxxxxxxxx
 .It full-duplex
 Force full duplex operation
diff --git a/share/man/man4/wi.4 b/share/man/man4/wi.4
index 1c43b37..1159167 100644
--- a/share/man/man4/wi.4
+++ b/share/man/man4/wi.4
@@ -241,7 +241,6 @@ DLink DWL520
 .El
 .Sh EXAMPLES
 Join an existing BSS network (ie: connect to an access point):
-.Pp
 .Bd -literal -offset indent
 ifconfig wlan create wlandev wi0 inet 192.168.0.20 \e
     netmask 0xffffff00
@@ -249,7 +248,6 @@ ifconfig wlan create wlandev wi0 inet 192.168.0.20 \e
 .Pp
 Join a specific BSS network with network name
 .Dq Li my_net :
-.Pp
 .Bd -literal -offset indent
 ifconfig wlan create wlandev wi0 inet 192.168.0.20 \e
     netmask 0xffffff00 ssid my_net
diff --git a/share/man/man4/wpi.4 b/share/man/man4/wpi.4
index 9932ff4..3fc1b6d 100644
--- a/share/man/man4/wpi.4
+++ b/share/man/man4/wpi.4
@@ -79,7 +79,6 @@ firmware license
 .El
 .Sh EXAMPLES
 Join an existing BSS network (i.e., connect to an access point):
-.Pp
 .Bd -literal -offset indent
 ifconfig wlan0 create wlandev wpi0 inet 192.168.0.20 \e
     netmask 0xffffff00
diff --git a/share/man/man4/xl.4 b/share/man/man4/xl.4
index 155273c..9c8e8b0 100644
--- a/share/man/man4/xl.4
+++ b/share/man/man4/xl.4
@@ -74,7 +74,6 @@ possible mode with a link partner.
 The
 .Nm
 driver supports the following media types:
-.Pp
 .Bl -tag -width xxxxxxxxxxxxxxxxxxxx
 .It autoselect
 Enable autoselection of the media type and options.
@@ -114,7 +113,6 @@ Enable BNC coax transceiver (available only on COMBO cards).
 The
 .Nm
 driver supports the following media options:
-.Pp
 .Bl -tag -width xxxxxxxxxxxxxxxxxxxx
 .It full-duplex
 Force full duplex operation