Remove more single-space hard sentence breaks.

1 files changed, 16 insertions, 8 deletions

diff --git a/share/man/man4/wi.4 b/share/man/man4/wi.4
index 7246daf..9e40cdf 100644
--- a/share/man/man4/wi.4
+++ b/share/man/man4/wi.4
@@ -45,27 +45,35 @@ The
 driver provides support for WaveLAN/IEEE PCCARD adapters (also known
 as WaveLAN II cards). Note that while Lucent sells both ISA and PCMCIA
 WaveLAN/IEEE devices, the ISA product is actually a PCMCIA card in an
-ISA to PCMCIA bridge adapter. Consequently, the
+ISA to PCMCIA bridge adapter.
+Consequently, the
 .Nm
-driver is required for both the ISA and PCMCIA NICs. Both the original
+driver is required for both the ISA and PCMCIA NICs.
+Both the original
 2Mbps WaveLAN/IEEE cards and the newer 6Mbps WaveLAN/IEEE Turbo
 adapters are supported.
 .Pp
-The core of the WaveLAN/IEEE is the Lucent Hermes controller. All
-host/device interaction is via programmed I/O with the Hermes. The
+The core of the WaveLAN/IEEE is the Lucent Hermes controller.
+All
+host/device interaction is via programmed I/O with the Hermes.
+The
 Hermes supports 802.11 and 802.3 frames, power management, BSS, WDS
-and ad-hoc operation modes. The
+and ad-hoc operation modes.
+The
 .Nm
 driver encapsulates all IP and ARP traffic as 802.11 frames, however
-it can receive either 802.11 or 802.3 frames. Transmit speed is
+it can receive either 802.11 or 802.3 frames.
+Transmit speed is
 selectable between 1Mbps fixed, 2Mbps fixed or 2Mbps with auto fallback.
 For WaveLAN/IEEE Turbo adapters, speeds up to 6Mbps are available.
 .Pp
 By default, the
 .Nm
-driver configures the WaveLAN card for ad-hoc operation. In this mode,
+driver configures the WaveLAN card for ad-hoc operation.
+In this mode,
 stations can communicate among each other without the aid of an access
-point. To join a service set, the driver must be set for BSS mode using
+point.
+To join a service set, the driver must be set for BSS mode using
 the
 .Xr wicontrol 8
 utility.