Markup fixes.

1 files changed, 30 insertions, 29 deletions

diff --git a/share/man/man4/utopia.4 b/share/man/man4/utopia.4
index 2ea9c98..08f530d 100644
--- a/share/man/man4/utopia.4
+++ b/share/man/man4/utopia.4
@@ -23,15 +23,16 @@
 .\" OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
 .\" SUCH DAMAGE.
 .\"
-.\" Author: Hartmut Brandt <harti@freebsd.org>
+.\" Author: Hartmut Brandt <harti@FreeBSD.org>
 .\"
 .\" $FreeBSD$
+.\"
 .Dd May 8, 2003
 .Dt UTOPIA 4
 .Os
 .Sh NAME
 .Nm utopia
-.Nd Driver module for ATM PHY chips
+.Nd "driver module for ATM PHY chips"
 .Sh SYNOPSIS
 .Cd device utopia
 .Sh DESCRIPTION
@@ -43,85 +44,85 @@ in either interrupt or polling mode, media option handling and application
 access to chip registers.
 .Pp
 The driver implements several sysctls that are accessible under the
-.Cm hw.atm.XXX
+.Va hw.atm. Ns Ao Ar iface Ac Ns Va .\&
 tree, where
-.Cm XXX
+.Ar iface
 is the name of the ATM interface:
-.Bl -tag -width XXX
-.It Cm phy_regs
+.Bl -tag -width indent
+.It Va phy_regs
 When reading this sysctl an array of 8-bit unsigned integers is returned
 containing all accessible chip registers starting at register 0.
 A register can be written by writing three 8-bit unsigned integers to the
 sysctl: the register number, the new value and a bit mask.
 This changes all bits in the register for which the corresponding bit in the
 mask is one to the bit values from value.
-Note, that not all registers may
+Note that not all registers may
 be writeable.
-.It Cm phy_loopback
+.It Va phy_loopback
 allows to put the interface in one of several loopback modes.
 Not all modes and all combinations of modes are supported on all chips.
 The possible modes are:
-.Bl -tag -width XXX
-.It Dv UTP_LOOP_NONE (0x00)
+.Bl -tag -width indent
+.It Dv UTP_LOOP_NONE Pq No 0x00
 No loopback, normal operation.
-.It Dv UTP_LOOP_TIME (0x01)
+.It Dv UTP_LOOP_TIME Pq No 0x01
 Timing source loopback.
 When this is set the transmitter's clock is
 derived from the receiver's clock.
-.It Dv UTP_LOOP_DIAG (0x02)
+.It Dv UTP_LOOP_DIAG Pq No 0x02
 Diagnostic loopback.
 In this mode the receiver's input is connected to the
 transmitter's output.
 The receiver gets back everything that is sent.
 The
 transmitter operates normally.
-.It Dv UTP_LOOP_LINE (0x04)
+.It Dv UTP_LOOP_LINE Pq No 0x04
 Serial line loopback.
 This connects the line receiver to the line transmitter.
 The chip transmits all cells back that it receives.
 The receiver operates
 normally.
-.It Dv UTP_LOOP_PARAL (0x08)
+.It Dv UTP_LOOP_PARAL Pq No 0x08
 Parallel diagnostic loopback.
 This feeds back all transmitted cells into the
 receiver between the parallel/serial converters.
 The transmitter
 operates normally.
-.It Dv UTP_LOOP_TWIST (0x10)
+.It Dv UTP_LOOP_TWIST Pq No 0x10
 Twisted pair diagnostic loopback.
 Connects the high speed receive data to the
 high speed transmit data.
 All received data is sent back.
 The receiver
 operates normally.
-.It Dv UTP_LOOP_PATH (0x20)
+.It Dv UTP_LOOP_PATH Pq No 0x20
 Diagnostic path loopback.
 This connects the receiver input to the transmitter
 output just between the path overhead processor and the byte mux.
 The
 transmitter operates normally.
 .El
-.It Cm phy_type
+.It Va phy_type
 This is the detected type of the phy chip.
 Currently the following chips are
 supported:
-.Bl -tag -width XXX
-.It Dv UTP_TYPE_UNKNOWN (0)
+.Bl -tag -width indent
+.It Dv UTP_TYPE_UNKNOWN Pq No 0
 The module could not determine the type of the PHY chip.
-.It Dv UTP_TYPE_SUNI_LITE (1)
+.It Dv UTP_TYPE_SUNI_LITE Pq No 1
 PMC-5346 (S/Uni-Lite)
-.It Dv UTP_TYPE_SUNI_ULTRA (2)
+.It Dv UTP_TYPE_SUNI_ULTRA Pq No 2
 PMC-5350 (S/Uni-Ultra)
-.It Dv UTP_TYPE_SUNI_622 (3)
+.It Dv UTP_TYPE_SUNI_622 Pq No 3
 PMC-5355 (S/Uni-622)
-.It Dv UTP_TYPE_IDT77105 (4)
+.It Dv UTP_TYPE_IDT77105 Pq No 4
 IDT77105 (25.6MBit UTP interface)
-.It Dv UTP_TYPE_IDT77155 (5)
+.It Dv UTP_TYPE_IDT77155 Pq No 5
 IDT77155 (155MBit interface)
 .El
-.It Cm phy_name
+.It Va phy_name
 This is a string describing the type of the PHY chip.
-.It Cm phy_stats
+.It Va phy_stats
 Physical and some ATM layer statistics.
 These are the statistics usually
 provided by the chip.
@@ -159,7 +160,7 @@ module also interfaces with the ifmedia system.
 The module reports the current state of the carrier and will issue a
 warning message when the carrier state changes.
 While the physical media itself cannot be changed, several media options can:
-.Bl -tag -width XXX
+.Bl -tag -width indent
 .It Cm SDH
 If the PHY is a Sonet/SDH chip this flag switches the interface into SDH mode.
 If this option is not set (the default) the interface is in Sonet mode.
@@ -179,5 +180,5 @@ may be needed for interworking with public networks.
 .Xr hatm 4 ,
 .Xr patm 4 ,
 .Xr utopia 9
-.Sh AUTHOR
-.An Harti Brandt Aq harti@freebsd.org .
+.Sh AUTHORS
+.An Harti Brandt Aq harti@FreeBSD.org